MOTOROLA PIP10
DIGITAL AUDIO BABY MONITOR
For: PIP10
User Guide
Safety instructions
WARNING
Strangulation Hazard. Children have STRANGLED in cords. Keep
this cord out of the reach of children (more than 1 metre away).
Never use extension cords with AC Adaptors. Only use the AC
Adaptors provided.
Baby monitor setup and use:
• Determine a location for the baby unit that will allow you to hear your baby
in his/her cot.
• Place the baby unit on a flat surface, such as a dresser, bureau, or shelf or
mount the unit to a wall securely using the keyhole slots under the stand.
• NEVER place the baby unit or cords within the cot.
WARNING
This digital audio baby monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the User
Guide, safe to use. Therefore, always read the instructions in this User Guide
carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
supervision.
actual use.
• This product is not a toy. Do not allow children to play with it.
• This digital audio baby monitor is not a substitute for responsible adult
• Keep this User Guide for future reference.
• Keep the cords out of reach of children.
• Do not cover the digital audio baby monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to
• Do not use the digital audio baby monitor in damp areas or close to water.
• Do not install the digital audio baby monitor in extreme cold or heat, direct
sunlight, or close to a heat source.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adaptors to easily accessible mains power.
CAUTION
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Welcome...
to your new Motorola PIP10 Audio Baby Monitor!
• Secure, interference free reception and high-quality sound.
• Long range up to 160 feet indoors and 1000 feet outdoors.
• Microphone with high sensitivity.
• Battery powered portable parent unit.
• Expandable up to 2 parent units.
• Parent unit with mute function and alert indicator.
• Out of range and low battery alarm.
Need help?
If you have any problems setting up or using your PIP10, please visit us at
motorolanursery.com/support.
Alternatively, you may find the answer in the ‘Help’ section at the back of
this guide.
This User Guide provides you with all the information
you need to get the most from your digital audio
baby monitor.
Read the instructions carefully, and be aware that
this digital audio baby monitor is only intended as an
aid. It is not a substitute for responsible and proper
adult supervision.
Before you use the digital audio baby monitor, set
up the parent and baby units. Follow the simple
instructions in ‘Getting started’, on the next few
pages.
Important
Only use the power adaptors supplied.
Got everything?
• Parent unit
• Baby unit
• AC power adaptor for the parent unit
• AC power adaptor for the baby unit
• Parent unit
• AC power adaptor for the parent unit
If you have purchased PIP10 dual parent units, you will also have the
following additional items:
1. Getting started ................................................................... 8
2. Getting to know your baby monitor ..........................11
3. Using the digital audio baby monitor .......................13
Turn the baby unit on / off ...........................................................................13
Turn the parent unit on / off ........................................................................13
Adjust the speaker volume on the parent unit .....................................13
Mute the speaker ..............................................................................................13
Sound alert .........................................................................................................13
4. Help ....................................................................................... 14
5. Technical Specifications .................................................15
6. General information ........................................................ 16
3.1
3.2
3.3
3.4
3.5
6
< This page has been intentionally left blank >
7
Getting started
1.
Location
Important
Do not place your PIP10 in the bathroom or other humid areas.
Place your units within reach of the AC power outlet and wall socket. The
socket-outlet should be installed near the equipment and should be easily
accessible.
Range of parent and baby units
Make sure the distance between the parent unit and baby unit is less than 300
metres.
Setting up
Important
The baby unit must be plugged into the AC power at all times. Use only the AC
power adaptor supplied with the product.
8
Getting started
Connecting the baby unit
1. Plug the DC plug of the power adaptor into the DC jack on the rear of the
baby unit and plug the other end of the AC adaptor into the AC power
outlet.
2. Switch on the AC power.
Installing batteries (not supplied) into the parent unit
1. Lift up the battery cover to remove it from the the parent unit.
Getting started
9
2.
Insert the battery cells (not supplied). Note the ’+’ and ’-’ markings inside
the battery compartment and insert in the correct direction.
3. Slide the battery cover back into place.
Note
You can either purchase non-rechargeble battery cells (2 x AAA batteries) or
rechargeable NIMH battery cells (2 x AAA batteries) for the parent unit.
Connecting the parent unit
You will need to carry out this process for the single or dual parent units.
1. Plug the DC plug of the power adaptor into the DC jack on the side of the
parent unit and plug the other end of the AC adaptor into the AC power
outlet.
2. Switch on the AC power. The parent unit turns on.
Note
The parent unit will not start charging if rechargeable NIMH battery cells are
installed.
Your PIP10 is now ready for use.
10
Getting started
2. Getting to know your baby monitor
Overview of your baby unit
Front view
Back view
C
D
Press and hold to turn the baby unit on or off.
C Power / Linking LED indicator
Turns on when the parent unit is powered on and linked to the baby unit.
A
B
A Microphone
B Power button
D Power jack
Getting to know your baby monitor
11
Overview of your parent unit
Front view
Back view
A
B
C
D
E
F
G
H
I
A Microphone
B Volume up
C Power jack
D Speaker
Press to increase the speaker volume.
E Power / Linking LED indicator
Turns on when the parent unit is powered on and linked to the baby unit.
Flashes when the parent and baby units are not linked with each other.
F Mute / Sound alert indicator (red LED)
G Power button
Press and hold to turn the parent unit on or off.
H Volume down / Mute
Press to decrease the speaker volume or scroll down in screen.
Press and hold to mute the speaker.
I Battery compartment
12
Getting to know your baby monitor
3. Using the digital audio baby monitor
on the baby unit to turn it on. The power / linking LED
• Press and hold
on the baby unit again to turn it off. The power / linking
Turn the baby unit on / off
3.1
• Press and hold
indicator will turn on.
LED indicator will turn off.
Turn the parent unit on / off
3.2
• Press and hold
indicator will turn on.
on the parent unit to turn it on. The power / linking LED
• Press and hold
on the parent unit again to turn it off. The power /
linking LED indicator will turn off.
Note
If you place the parent and baby units too close together, you may hear a high
pitched noise. This is not a fault. The units are designed to be operated at
some distance apart, e.g. in separate rooms, so move the units further apart.
If the power / linking LED indicator flashes on the parent unit, they are not
linked to each other. Make sure that both units are powered on, and the
distance between the parent and baby units is less than 300 metres.
3.3 Adjust the speaker volume on the parent unit
Press
to increase or decrease the volume.
or
3.4 Mute the speaker
Press and hold
turn on.
to mute the speaker. The mute / sound alert indicator will
Sound alert
3.5
The parent unit beeps when a loud sound is detected by the baby unit. The
mute / sound alert indicator will flash. This feature is only available when the
speaker of the parent unit is muted.
Using the digital audio baby monitor
13
4.
Help
The power / linking LED Indicator on the parent unit does not turn on.
• Check whether the parent unit is powered on.
• Check whether the batteries are correctly installed and not drained.
• Connecting the parent unit to the mains power to recharge it.
The power / linking LED indicator on the parent unit flashes.
• The parent unit and the baby unit may be out of range with each other.
Reduce the distance between the units, but not closer than 300 metres.
• The baby unit may be powered off. Press and hold
on the baby unit to
The parent unit beeps.
• The parent unit may have lost connection with the baby unit. Make sure the
distance between the parent unit and baby unit is less than 300 metres.
• The baby unit may be powered off. Press and hold
on the baby unit to
power it on.
power it on.
Unable to hear the sound or baby cry from the parent unit.
• The volume level in the parent unit may be set too low. Increase the volume
level of the parent unit. Refer to section 3.3 for volume level settings.
• The parent unit and the baby unit may be out of range with each other.
Make sure the distance between the parent unit and baby unit is less than
300 metres.
The Digital Audio Baby Monitor system produces a high-pitched noise.
• The parent unit and the baby unit are too close with each other. Make sure
the distance between the parent unit and baby unit is less than 300 metres.
• The speaker volume of the parent unit may be set too high. Decrease the
volume of the parent unit. Refer to section 3.3 for volume level settings.
14
Help
5.
Technical Specifications
RF frequency bands
1881.792 MHz to 1897.344 MHz (Europe)
1921.536 MHz to 1928.448 MHz (USA & Canada)
RF transmission power
< 0.25 W (EU version)
Line of sight operating
range between the baby and
parent units
300 meters
Power adaptor for the baby
and parent units
DC 6.0V, 0.4A with DC round plug from:
Dongguan Everest Industrial Co., Ltd.
Address: No.2, Min Xing 1st Road, Shang Jiao,
Chang An Town, Dong Guan, GuangDong,
China.
• EP19-060040WXLA for USA and Canada
• EP19A-060040WXEZ for Europe
OR
Shenzhen Huajin Electron Co., Ltd.
Address: Block E, Xing Zhongqiao Industrial
Park, Baolong Six Road, BaoLong Industrial
City, Longgang District, 518116 ShenZhen,
China.
• HJ-0600400A1-US for USA and Canada
• HJ-0600400P1-EU for Europe
•
•
enters monitor mode when sound level is
higher than 60dBAspl.
enters standby mode when sound level is
lower than 60dBAspl.
ECO friendly Voice-
activation (VOX feature)
Parent unit
Note
Specifications are subject to change without prior notice.
Technical Specifications
15
General information
6.
Cleaning and care
Important
Always switch off and disconnect the power adaptor before cleaning your
digital audio baby monitor.
• Clean your digital audio baby monitor with a slightly damp cloth or with an
anti-static cloth. Never use cleaning agents or abrasive solvents.
• Do not clean any part of the digital audio baby monitor with thinners or
other solvents and chemicals - this may cause permanent damage to the
product which is not covered by the warranty.
• Keep your digital audio baby monitor away from hot, humid areas or strong
sunlight, and do not let it get wet.
• Every effort has been made to ensure high standards of reliability of your
digital audio baby monitor. However, if something does go wrong, please
do not try to repair it yourself - contact Customer Service for assistance.
Disposal of the Device (environment)
At the end of the product life cycle, you should not dispose of
this product with normal household waste. Take this product to
a collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user guide and/or box
indicates this. Some of the product materials can be re-used
if you take them to a recycling point. By reusing some parts
or raw materials from used products you make an important
contribution to the protection of the environment. Please
contact your local authorities in case you need more information
on the collection points in your area. Dispose of the battery pack in an
environmentally-friendly manner according to your local regulations.
Consumer Products and Accessories Warranty
Thank you for purchasing this Motorola branded product manufactured under
license by Meizhou Guo Wei Electronics Co. LTD., AD1 section, The economy
exploitation area, Meizhou, Guangdong, P.R.China . (“MZGW”)
What Does this Warranty Cover?
Subject to the exclusions contained below, MZGW warrants that this Motorola
branded product (“Product”) or certified accessory (“Accessory”) sold for use
with this product that it manufactured to be free from defects in materials and
workmanship under normal consumer usage for the period outlined below.
This Limited Warranty is your exclusive warranty and is not transferable.
Who is covered?
This warranty extends only to the first consumer purchaser, and is not
transferable.
16
General information
What will MZGW do?
MZGW or its authorized distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or
Accessories that do not conform to this limited warranty. We may use
functionally equivalent reconditioned / refurbished / pre-owned or new
Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA
OR MZGW BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY
OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL
EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied warranty, so
the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights that vary from one
jurisdiction to another.
Products Covered
Consumer Products
Consumer Accessories
Consumer Products and Accessories
that are Repaired or Replaced
Length of Coverage
Two (2) years from the date of the
products original purchase by the
first consumer purchaser of the
product.
Ninety (90) days from the date of
the accessories original purchase by
the first consumer purchaser of the
product.
The balance of the original warranty
or for ninety (90) days from the date
returned to the consumer, whichever
is longer.
General information
17
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts
due to normal wear and tear are excluded from coverage.
Abuse & Misuse. Defects or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as physical damage
(cracks, scratches, etc.) to the surface of the product resulting from misuse; (b)
contact with liquid, water, rain, extreme humidity or heavy perspiration, sand,
dirt or the like, extreme heat, or food; (c) use of the Products or Accessories
for commercial purposes or subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not the fault of Motorola or
MZGW are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage
that result from the use of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting
from service, testing, adjustment, installation, maintenance, alteration, or
modification in any way by someone other than Motorola, MZGW or its
authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date
tags that have been removed, altered or obliterated; (b) broken seals or that
show evidence of tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts, are excluded from
coverage.
Communication Services. Defects, damages, or the failure of Products or
Accessories due to any communication service or signal you may subscribe to
or use with the Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please visit us at:
motorolanursery.com/support
You will receive instructions on how to ship the Products or Accessories at
your expense and risk, to a MZGW Authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the
original proof of purchase (receipt) which includes the date, place and seller
of the Product; (c) if a warranty card was included in your box, a completed
warranty card showing the serial number of the Product; (d) a written
description of the problem; and, most Importantly; (e) your address and
telephone number.
These terms and conditions constitute the complete warranty agreement
between you and MZGW regarding the Products or Accessories purchased
by you, and supersede any prior agreement or representations, including
representations made in any literature publications or promotional materials
issued by MZGW or representations made by any agent, employee or staff of
MZGW, that may have been made in connection with the said purchase.
EU Declaration of Conformity (DoC)
Hereby, MZGW declares that the radio equipment type is in compliance with
RE Directive 2014/53/EU. The full text of the EU declaration of conformity is
available on the website: motorolanursery.com
18
General information
FCC and IC regulations
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ISEDC Warning
This device complies with Innovation, Science, and Economic Development
Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d' Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
General information
19
Radiation Exposure Statement:
The baby unit complies with FCC/ISEDC radiation exposure limits set forth for
an uncontrolled environment. The baby unit should be installed and operated
with minimum distance 20cm between the radiator& your body.
The parent unit has been tested and comply with FCC and ISEDC SAR limits.
For face up operation, please hold the device 10mm from your face.
Déclaration d'exposition aux radiations:
L'unité bébé est conforme aux limites d'exposition aux rayonnements FCC /
ISEDC établies pour un environnement non contrôlé. L'unité bébé doit être
installée et utilisée avec une distance minimale de 20 cm entre le radiateur et
votre corps.
L'unité parent a été testée et est conforme aux limites SAR FCC et ISEDC.
Pour un fonctionnement face vers le haut, tenez l'appareil à 10 mm de votre visage.
20
General information
< This page has been intentionally left blank >
< This page has been intentionally left blank >
< This page has been intentionally left blank >
Manufactured, distributed or sold by Meizhou
Guo Wei Electronics Co. LTD., official
licensee for this product. MOTOROLA and
the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark
Holdings, LLC. and are used under license. All
other trademarks are the property of their
respective owners. © 2021 Motorola Mobility
LLC. All rights reserved.
Version 3.0 (EN_EU&NA)