all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.13 MiB | March 01 2019 | |||
1 | Cover Letter(s) | March 01 2019 | ||||||
1 | External Photos | March 01 2019 | ||||||
1 | ID Label/Location Info | March 01 2019 | ||||||
1 | Internal Photos | March 01 2019 | ||||||
1 | Cover Letter(s) | March 01 2019 | ||||||
1 | Cover Letter(s) | March 01 2019 | ||||||
1 | RF Exposure Info | March 01 2019 | ||||||
1 | Test Setup Photos | March 01 2019 | ||||||
1 | Test Report | March 01 2019 |
1 | User Manual | Users Manual | 1.13 MiB | March 01 2019 |
Motorola AXH01 Wireless Home Telephone with Alexa Built-In Warning: Charge the handset for 16 hours before use. Welcome... to your new Motorola AXH01 wireless home telephone with Alexa Built-In!
Before you can use Alexa you will need An active landline home telephone service. An active Caller Display subscription. An active internet connection and router. An Amazon account. The Amazon Alexa app. Alexa Access Alexa at the touch of a button on your cordless handset. Instant access to your cell phone contacts to make calls via the Motorola AXH01 handset over your land line. General Features 2.0 65k TFT bright backlit colour display (176 x 220). Laser etched backlit keypad. Polyphonic ringer melodies. Caller ID shows you whos calling and see details of the callers in a Calls lists.1 Make internal calls, transfer external calls and hold 3-way conversation. Need help?
If you have any problems setting up or using your Motorola AXH01, please contact Customer services: xxxxxxxx Alternatively, you may find the answer in the Help section at the back of this guide. Please note that this equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. 1 Some features may require a subscription from your local telephone company. This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call or use Alexa you will need to set up your phone. Follow the simple instructions in Getting Started, on the next few pages. Got everything?
AXH handset AXH charger cradle AXH base AC power adaptor for the base AC power adaptor for the charger cradle 2 x rechargeable Ni-MH battery cells Ethernet cable Telephone line cord For a better tomorrow We make every effort through our design, research, engineering and supply chain management to make better products for everyone, focusing on both social and environmental responsibility. Eco friendly packaging with a minimum 20% post consumer recycled content. Phone housing is built with a minimum of 25% post consumer recycled content plastic. 4.1 4.2 3.1 3.2 3.3 4.3 4.4 4.5 4.7 1. Getting started ................................................................... 7 2. Getting to know your phone .........................................11 3. Alexa ..................................................................................... 16 Download the Amazon Alexa app and sign in .....................................16 Download the Motorola AXH01 App and log into Alexa ..................16 To activate Alexa ..............................................................................................17 4. Using the phone ................................................................18 Switch the handset on / off .........................................................................18 Calls .......................................................................................................................18 4.2.1 Make a call ..........................................................................................18 4.2.2 Preparatory dialling .........................................................................18 4.2.3 Make a call using speed dial keys ..............................................18 4.2.4 End a call .............................................................................................18 4.2.5 Receive a call .....................................................................................19 Adjust the earpiece or hands-free volume.............................................19 Adjust the ringer volume ..............................................................................19 Mute .......................................................................................................................19 Intercom, second calls, transferring calls and conference calls .....19 4.7.1 Making an internal call ...................................................................19 4.7.2 Receiving an internal call ..............................................................19 4.7.3 Making a second call..................................................................... 20 4.7.4 Conference calls ............................................................................. 20 4.7.5 Transferring calls ..............................................................................21 4.7.6 Receiving a second call (call waiting) ......................................21 Lock / unlock the keypad .............................................................................21 5. Contacts ..............................................................................22 View the details or dial an entry ...............................................................22 Predial an entry ................................................................................................22 6. Calls List ..............................................................................23 New calls alert ..................................................................................................23 Dial a number in the calls list ......................................................................23 Save a calls list number to the contact list ...........................................23 View the details of an entry ........................................................................24 Delete an entry.................................................................................................24 Delete all calls list ............................................................................................24 6.1 6.2 6.3 6.4 6.5 6.6 5.1 5.2 4.8 4 9.1 6.7 9.2 7.1 7.2 8.1 8.2 8.3 8.4 Predial an entry in the calls list ..................................................................24 7. Clock & alarm ....................................................................25 Set the date and time ....................................................................................25 Set the alarm .....................................................................................................25 8. Call settings ...................................................................... 26 Auto hang-up ...................................................................................................26 Auto answer ......................................................................................................26 Add a speed dial number.............................................................................26 Edit / Delete a speed dial number ...........................................................27 9. Handset settings ..............................................................28 Sound ...................................................................................................................28 Ringer volume ..................................................................................28 9.1.1 Ringer melody ..................................................................................28 9.1.2 9.1.3 Key beep .............................................................................................28 9.1.4 Out of range tone ...........................................................................29 9.1.5 Cradle tone ........................................................................................29 Display .................................................................................................................29 9.2.1 Display contrast ...............................................................................29 9.2.2 Wallpaper ...........................................................................................29 9.2.3 Display backlight ............................................................................ 30 Language ........................................................................................................... 30 Registration ...................................................................................................... 30 De-registering a handset...............................................................................31 Handset name ...................................................................................................31 Restore to default settings ...........................................................................31 Handset version ................................................................................................31 10. Advanced settings ..........................................................32 DECT settings ...................................................................................................32 10.1.1 Change PIN ........................................................................................32 10.1.2 Clock master .....................................................................................32 10.1.3 ECO + ...................................................................................................32 10.1.4 Base version ......................................................................................32 10.1.5 Restore to default settings ..........................................................33 Internal names ..................................................................................................33 Line settings ......................................................................................................33 10.3.1 Line name ...........................................................................................33 9.3 9.4 9.5 9.6 9.7 9.8 10.2 10.3 10.1 5 10.3.2 Line ID .................................................................................................33 10.4 Line selection ................................................................................................... 34 10.5 Default settings ............................................................................................... 34 11. Technical Specifications ................................................35 12. Help ...................................................................................... 36 13. General information ....................................................... 38 6 Getting started 1. Location Important Do not place your Motorola AXH01 in the bathroom or other humid areas. Place your Motorola AXH01 base within reach of the AC power outlet, telephone wall socket and router. The AC outlet should be installed near the equipment and should be easily accessible. Note If you are wall mounting your phone please refer to the wall mount template on page 46. Handset range The unit has a range of up to 300 meters outdoors when there is a clear line of sight between the base and handset. Any obstruction between the base and handset will reduce the range significantly. With the base indoors and the handset either indoors or outdoors, the range will normally be up to 50 meters. Thick concrete and stone walls can severely affect the range. If you are on a call, and the on your handset indicates that you are within range of the base. When Signal strength The out of range of the base, the handset will display out of range tone is set to on, you will hear a warning beep. The line will hang up if the handset moves out of range of the base. Move closer to the base and the handset will automatically reconnect. Setting up Important The base station must be plugged into the AC power outlet at all times. Use only the AC power adaptor and telephone line cord supplied with the product. Connecting the base Getting started 7 1. Plug the telephone line cord into the socket marked base and plug the other end into the telephone wall socket. on the rear of the 2. Plug the AC power adaptor into the socket marked on the rear of the base and plug the other end into the AC outlet. Switch on the AC power. 3. Plug the Ethernet cable into the socket marked and plug the other end into the router. on the rear of the base Connecting the charger 1. Plug the AC power adaptor into the socket marked on the rear of the charger and plug the other end into the AC power outlet. Switch on the AC power. Installing and charging the handset 1. Remove the battery cover from the back of the handset and insert the rechargeable Ni-MH battery cells supplied. Please note the + and
- markings inside the battery compartment and insert in the correct direction. 1 Press down 2 Slide 2. Slide the battery cover back into place. 3. If you are charging the batteries for the first time, place the handset on the charger to charge for at least 16 hours continuously. 4. When the handset is fully charged, will appear steady on the display. 8 Getting started Important Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-
MH 750mAh rechargeable batteries) supplied with your Motorola AXH01. Battery low warning If you hear a warning beep every 60 seconds during a call, you will need to recharge the handset before you can use it again. When charging, will scroll on the display. Battery performance In ideal conditions, fully charged batteries should give up to 17.5 hours talk time or up to 300 hours standby time on a single charge.1 Note that new batteries do not reach their full capacity until they have been put to normal use for several days. To keep your batteries in the best condition, leave the handset off the charger for a few hours at a time. Running the batteries right down at least once a week will help them last as long as possible. The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less talk / standby time. Eventually they will need to be replaced. After charging your handset for the first time, subsequent charging time is about 68 hours a day. Batteries and handset may become warm during charging. This is normal. 1All talk and standby times are approximate and depend on features selected and usage pattern. Date and time The date and time is set automatically when registered to the base. You can change the date and time format to show MM/DD or DD/MM and 12 hours or 24 hours. Note The phone can be set so that the base or handset can be the clock master, once set this will sync across all handset. If you have the handset set to clock master as well as changing the format you can set the date and time manually. 1. Press Menu, scroll u to Clock & Alarm and press Select. 2. Date/Time is highlighted. Press Select. 3. To change the date format, scroll d to Date Format and scroll t or u to 4. Scroll u to Enter Date, enter the date, e.g. when set to MM/DD, 08/27/19 for select either MM/DD or DD/MM. 27 August 2019 and press Ok. 5. Once the date is set, to change the time format, scroll d to Time Format and scroll t or u to select either 12 Hours or 24 Hours. Getting started 9 6. Scroll u to Enter Time, enter the time, e.g. when set to 24 Hours, 1430 for 2:30pm and press Save. If the current time format setting is 12 hour, scroll t or u to select AM or PM. 7. Press e to return to standby. Setting up Alexa In order to set-up the Motorola AXH01 to work with Alexa, landline and Alexa2Alexa (A2A) calling you need the following:
1. An active landline home telephone service. 2. An active Caller Display subscription. 3. An active internet connection and router. 4. An Amazon account. https://www.amazon.com 5. The Amazon Alexa app. Download it free to your cell phone. Start the download process in your mobile browser at http:/alexa.amazon. com Your Motorola AXH01 is now ready for use. 10 Getting started 2. Getting to know your phone Overview of your handset A B C D E F G H I J K L M N O P Q A Ring indicator LED Flashes when the phone rings. B Display For display icons, see Display on page 13. C Left softkey / Menu / OK Enter the main menu. Select the option displayed on screen. Confirm a menu option. D Scroll up / Volume up Scroll up through lists and menus. During a call, press to increase the earpiece and hands-free volume. In standby, press to enter the handset ringer volume setting. When you have entered the handset ringer volume setting, press to increase the handset ringer volume. When the phone is ringing, press to increase the handset ringer volume. E Scroll left / Contacts / Flash Scroll left when in the menu options. Press to move the cursor to the left. Press to enter the contact list menu. Press and hold for switchboard / PABX services and some network services. Getting to know your phone 11 F Talk / Hands-free / Line selection Make or answer a call. Activate and deactivate hands-free during a call. Press and hold to open the Line selection menu. G Scroll down / Volume down Scroll down through lists and settings. During a call, press to decrease the earpiece and hands-free volume. In standby, when you have entered the handset ringer volume setting, press to decrease the handset ringer volume. When the phone is ringing press to decrease the handset ringer volume. H Speed dial keys I Press and hold to view / edit / dial the speed dial information for that key.
* / Change case / Pulse to tone dialling / Ringer off Press to dial a *. Press to change the case when entering letters / editing. During a call, press and hold to switch from pulse dialling to tone dialling.
(This feature is base dependent). Press and hold in standby to turn the ringer on / off. J Space / Pause Press to insert a space during text editing. Press and hold to enter a pause (P) when dialling or storing numbers or when in call mode. K Earpiece L Right softkey / Clear / Back / Call list Delete characters on screen when entering names and numbers. When Back is displayed on the screen, press to go back to the previous menu. In standby, press to enter the call list. M Scroll right / Redial / Intercom Scroll right when in the menu options. Press to move the cursor to the right. Press to enter the redial list. In standby, press and hold for intercom. N Alexa key Press to activate Alexa. O End call / Power on/off / Exit Press to end a call. In standby, press and hold to switch the phone off. When the handset is switched off press to turn the handset on. When in the menu press to return to standby. P # / Keypad lock Dial a #. Press and hold to lock the keypad. In editing mode, press to bring up symbols. Q Microphone 12 Getting to know your phone Display overview Signal icon Displays when in hands-free mode Mute is activated Ringer is switched off Indicates a missed call Indicates a message has been left Alexa Notification icon Alarm is set Batteries are fully charged Batteries are partially charged Batteries are running low Batteries are almost fully discharged Batteries are empty Getting to know your phone 13 Overview of the charger A A Charging contacts Navigating the menus Your Motorola AXH01 has an easy to use menu system on the handset. Each menu has a list of options, which you can see on the menu map on the following page. Scrolling through menus 1. From the standby screen, press Menu. 2. Use the u / d / B (t) / r (u) keys to scroll through the menu. 3. Left softkey - press to action the corresponding word prompt shown in the The main menu is opened. lower left corner of the display. Right softkey - press to action the corresponding word prompt in the lower right corner of the display. 4. Press e to return to standby. 14 Getting to know your phone Menu map Contacts Press B to enter the phonebook. View 1 Predial 1 Call List Missed Calls Received Calls Outgoing Calls Accepted Calls All Call Clock & Alarm Date/Time Alarm Call Settings Auto Hang-up Auto Answer Speed Dial Handset Settings Advance Settings DECT Settings Change PIN Clock Master ECO +
Base Version Base Setback Internal Names Line Settings Line Selection Sound Ringer Volume Ringtone Key Beep Out Range Tone Cradle Tone Display Contrast Wallpaper Backlight Timeout Language Registration Handset Name Handset Setback Handset Version Getting to know your phone 15 Setting up 3. Alexa 3.1 Download the Amazon Alexa app With the Amazon Alexa app, you can set up your phone, manage shopping lists, alarms, music, and much more. The Amazon Alexa app is available on cell phones with:
Fire OS 3.0 or higher Android 5.0 or higher iOS 9.0 or higher To download the Amazon Alexa app, go to the app store on your mobile device and search for Amazon Alexa app. Select and download the app. Once you have downloaded the Amazon Alexa app go to your cell phones home screen and click on the icon, you will then be asked to log using your Amazon account details. Download the hello voice app and log into Alexa Download the hello voice app to your cell phone (Go to the app store on your mobile device and search for hello voice app). Select and download the app. Ensure your cell phone is using the same Wi-Fi connection as the router your base is plugged into. Once you have downloaded the app, go to your cell phones home screen and click on the icon. Once the app is open it will automatically search for all active devises. Select the devise you want and select Done. You will then be asked to log into Amazon Alexa through the hello voice app. Select Amazon Alexa Login, you will then be asked to log using your Amazon account details. After you get the Login success page you can start using your AXH01. 16 Alexa To activate Alexa 3.3 1. Press to activate Alexa, the display will show Alexa listening... and a beep will be heard. 2. You can then ask Alexa what you need. For example:
Alexa whats the weather today. The screen will display Alexa thinking.... 3. The display will show Alexa speaking... when a response is provided. Alexa 17 Switch the handset on / off 4. Using the phone 4.1 1. To power the handset off, press and hold e for about 5 seconds. 2. Confirm? is displayed, press Yes to confirm or No to cancel. 3. Press e to turn the handset back on. Calls 4.2 4.2.1 Make a call When making calls you can pre set the line selection to auto, manual or individual line selection, see page 35. The default setting is auto, when a call is made the base will automatically select the line. 1. Press t. 2. Dial the number. If the line selection is set to manual, press t scroll u or d to highlight Auto or Line Name and press Select, if Line Name is selected scroll u or d to the desired line and press Select, then dial the number. 3. Press t again to switch to hands-free call. Note Your phone will automatically time the duration of all external calls, the call timer will display on the screen. When the call ends, the total duration of your talk time is shown for 1 second. 4.2.2 Preparatory dialling 1. Dial the number first. If you make a mistake press Clear to delete the last digit. 2. Press t to dial. If the line selection is set to manual, press t scroll u or d to highlight Auto or Line Name and press Select, if Line Name is selected scroll u or d to the desired line and press Select. 3. Press t again to switch to hands-free call. 4.2.3 Make a call using speed dial keys 1. Press and hold the relevant keypad number (1-9), press t the number will be dialled automatically. If the line selection is set to manual, press t scroll u or d to highlight Auto or Line Name and press Select, if Line Name is selected scroll u or d to the desired line and press Select. Note To assign a speed dial number, see page 26. 4.2.4 End a call Press O, or place the handset back on the charger. 18 Using the phone Note You can end calls simply by placing the handset on the charger. To turn this feature off, see Auto hang-up, see page 26 . 4.2.5 Receive a call When you receive an external call, the phone rings, and the phone number (or name if stored in the contact list) is displayed. 1. Press t to answer the call and press t again to switch to hands-free.
, the line information Note If you prefer for the call to be automatically answered when you lift the handset off the charger, you will need to switch Auto answer on, see page 26. 4.3 Adjust the earpiece or hands-free volume 1. During a call, press u to increase and d to decrease the volume level. There are 5 levels to choose from, volumes 1-5. 4.4 Adjust the ringer volume In standby, press u and then scroll u or d to select the desired volume level. While the phone is ringing, press u or d to select the desired volume level. Press and hold in standby to turn the ringer off. Press and hold again to turn the ringer back on. Intercom, second calls, transferring calls and conference 4.5 Mute 1. During a call press Mute, m is displayed. 2. To turn mute off, press Unmute. 4.7 calls 4.7.1 Making an internal call If more than one handset is registered to the base, an internal call can be made between handsets and a second call can also be made, see page 20. 1. If 2 handsets are registered to the base, press Intercom and the other handset rings automatically. If 2 or more handsets are registered to the base, press Intercom and scroll d to select the handset that is to be called, press Select. 2. 4.7.2 Receiving an internal call When an internal call is received, the handset name or number that is calling is displayed. 1. Press Silence to stop the handset ringing. 2. Press Reject to reject the call. 3. Press t to answer the call. Using the phone 19 4.7.3 Making a second call When on an internal or external call you can make a second internal or external call without ending the first call. Second internal call During a call:
1. Press Option and scroll d Intercom and press Select. 2. If 2 handsets are registered to the base the other handset rings automatically. 3. If 2 or more handsets are registered to the base, scroll d to select the handset that is to be called, or select All Handsets to ring all handsets, press Select. 4. When the second handset answers you can have an internal conversion. 5. Press Option, then scroll u or d to the required option. Switch Calls - to switch between the 2 calls. Conference - to join the 2 calls to make a 3-way call. Transfer - to transfer the call to the second handset. Release Active - to end the active call. Second external call During a call:
1. Press Option and scroll d to Add Call, press Select. 2. You can either:
Dial the number manually. Press B - to dial a number in the contact list. Press d - to dial a number in the call list. Then press Dial to dial. 3. If the line selection is set to manual, press t scroll u or d to highlight Auto or Line Name and press Select, if Line Name is selected scroll u or d to the desired line and press Select. 4. When the second call answers you can have a conversion. 5. Or select the following options:
Press Option, then scroll u or d to the required option. Switch Calls - to switch between the 2 calls. Conference - to join the 2 calls to make a 3-way call. Transfer - to transfer the call to the second handset. Release Active - to end the active call. 4.7.4 Conference calls If intrusion calls is set to allowed, see page 34, when a handset is on a call a second handset can initiate a conference call. Press t on the second handset and it will take the same line and a conference call will begin. 20 Using the phone 4.7.5 Transferring calls If when transferring a call the second handset doesnt answer, then you can press Option, Transfer is highlighted, press Select to transfer the call to the second handset unannounced. 4.7.6 Receiving a second call (call waiting) When on an internal or external call you can receive a second internal or external call without ending the first call. When there is a second call the call waiting screen will be displayed, you can either press Accept to accept the second call and put your first caller on hold or Reject to reject the second call. If the call is accepted, press Option, then scroll u or d to the required option. Switch Calls - to switch between the 2 calls. Conference - to join the 2 calls to make a 3-way call. Transfer - to transfer the call to the second handset. Release Active - to end the active call. 4.8 Lock / unlock the keypad The keypad can be locked so that it cannot be operated accidentally. 1. Press and hold #, Keys Locked is displayed. 2. Press and hold # again to unlock the keypad. Note When the keypad is locked an incoming call can still be answered and the handset will operate as normal. When the call ends, the keypad lock comes on again. Using the phone 21 View the details or dial an entry 5. Contacts You can enter the contacts list by pressing B. The list is stored in the base and you cannot add, edit or delete contacts from the list., 5.1 1. Press B to enter the contacts list. 2. Scroll u or d to the entry you want or search alphabetically. 3. Press t to dial. 4. Or to see the details, press Option scroll d to View and press Select. 5.2 1. Press B to enter the contacts list. 2. Scroll u or d to the entry you want or search alphabetically and press Predial an entry Option. 3. Scroll d to Predial and press Select. 4. If the entry has more than one number stored, d to the number you require, press Select. 5. The number is displayed. 6. Press t to dial. 22 Contacts 6. Calls List Provided the identity of the caller is not withheld, the number of the caller will be displayed together with the date and time of the call (if provided by the network). You can either enter the calls list by pressing d or through the handset menu. You can also enter the outgoing calls list directly by pressing u. Note If the callers number is stored in your contact list along with a name, when you receive a call the name will also be displayed. New calls alert 6.1 You can either enter the calls list by pressing d or through the handset menu. You can also enter the outgoing calls list directly by pressing u. When you have new missed calls (incoming calls that you havent answered), the display shows X Missed Call(s) and 6.2 Dial a number in the calls list 1. Press d, scroll u or d to highlight the calls list (Missed Calls, Received Calls, flashes. Outgoing Calls, Accepted Calls, All Call) you want. 2. Press Select, the most recent number (or name if stored in the contact list) is displayed. 3. Scroll u or d to the entry you want to dial. 4. Press t to dial. If the line selection is set to manual, press t scroll u or d to highlight Auto or Line Name and press Select, if Line Name is selected scroll u or d to the desired line and press Select. Save a calls list number to the contact list 6.3 1. Press d, scroll u or d to highlight the Calls list (Missed Calls, Received Calls, Outgoing Calls, Accepted Calls, All Call) you want. 2. Press Select, the most recent number (or name if stored in the contact list) is displayed. 3. Scroll u or d to the entry you want and press Option. 4. Save Number is highlighted, press Select. 5. Scroll u or d to select the desired contact list and press Select. 6. Scroll d to select the number category you want to store the number under, either Home, Mobile, or Office and press Select. 7. First Name is highlighted, enter the first name and scroll d. 8. Last Name is highlighted, enter the last name and press Save. 9. Press e to return to standby. Calls List 23 6.4 View the details of an entry 1. Press d, scroll u or d to highlight the Calls list (Missed Calls, Received Calls, Outgoing Calls, Accepted Calls, All Call) you want. 2. Press Select, the most recent number (or name if stored in the contact list) is displayed. 3. Scroll u or d to the entry you want and press Option. 4. Scroll d to View and press Select. The number (and name if stored in the contact list), and the time and date of the call are displayed. 5. Press e to return to standby. 6.5 Delete an entry 1. Press d, scroll u or d to highlight the calls list (Missed Calls, Received Calls, Outgoing Calls, Accepted Calls, All Call) you want. 2. Press Select, the most recent number (or name if stored in the contact list) is displayed. 3. Scroll u or d to the entry you want and press Option. 4. Scroll d to Delete and press Select. The display shows Delete?. 5. Press Yes to delete or No to cancel. 6. Press e to return to standby. 6.6 Delete all calls list 1. Press d, scroll u or d to highlight the calls list (Missed Calls, Received Calls, Outgoing Calls, Accepted Calls, All Call) you want. 2. Press Select, the most recent number (or name if stored in the contact list) is displayed. 3. Press Option, scroll d to Delete All and press Select. The display shows Delete All?. 4. Press Yes to delete or No to cancel. 5. Press e to return to standby. Predial an entry in the calls list 6.7 1. Press d, scroll u or d to highlight the calls list (Missed Calls, Received Calls, Outgoing Calls, Accepted Calls, All Call) you want. 2. Press Select, the most recent number (or name if stored in the contact list) is displayed. 3. Scroll u or d to the entry you want and press Option. 4. Scroll d to Predial and press Select. The number is displayed. 5. Press t to dial. If the line selection is set to manual, press t scroll u or d to highlight Auto or Line Name and press Select, if Line Name is selected scroll u or d to the desired line and press Select. 24 Calls List Clock & alarm 7. The date and time is set automatically when registered to the base. You can change the date and time format to show MM/DD or DD/MM and 12 hours or 24 hours. Note The phone can be set so that the base or handset can be the clock master, once set this will sync across all handset. If you have the handset set to clock master as well as changing the format you can set the date and time manually. Set the date and time 7.1 1. Press Menu, scroll u to Clock & Alarm and press Select. 2. Date/Time is highlighted. Press Select. 3. To change the date format, scroll d to Date Format and scroll t or u to select either MM/DD or DD/MM. 4. Scroll u to Enter Date, enter the date, e.g. when set to MM/DD, 08/27/19 for 27 August 2019 and press Ok. 5. Once the date is set, to change the time format, scroll d to Time Format and scroll t or u to select either 12 Hours or 24 Hours. 6. Scroll u to Enter Time, enter the time, e.g. when set to 24 Hours, 1430 for 2:30pm and press Save. If the current time format setting is 12 hour, scroll t or u to select AM or PM. 7. Press e to return to standby. Set the alarm 7.2 1. Press Menu, scroll u to Clock & Alarm and press Select. 2. Scroll d to Alarm and press Select. 3. Activation is highlighted, scroll t or u to Off, Once or Daily. 4. Scroll d to highlight Enter Time. 5. Enter the time (HH:MM). If the current time format setting is 12 hour, scroll t or u to select AM or PM. 6. Scroll d to highlight Ringtone t or u to select the desired ringtone and press Save. 7. Press e to return to standby. Notes When the alarm sounds, screen, press Off or e to stop the ring. If the alarm is set to Once, has sounded once. If the alarm is set to Daily, sounded. will flash and the alarm time displays on the will disappear from the screen after the alarm will remain on the screen after the alarm has Clock & alarm 25 Auto hang-up 8. Call settings 8.1 The phone is set to end calls by placing the handset on the charger. This feature can be switched off so that calls can only be ended by pressing O. 1. Press Menu, scroll d to Call Settings and press Select. 2. Auto Hang-up is highlighted. Press Select. 3. Scroll u or d to On or Off and press Select. 4. Press e to return to standby. 8.2 Auto answer The phone is set to answer calls by pressing t if you would rather be able to answer the call by lifting the handset off the charger you will need to turn this feature on. 1. Press Menu, scroll d to Call Settings and press Select. 2. Scroll d to Auto Answer and press Select. 3. Scroll u or d to On or Off and press Select. 4. Press e to return to standby. 8.3 Add a speed dial number 1. Press Menu, scroll d to Call Settings and press Select. 2. Scroll d to Speed Dial and press Select. 3. Scroll u or d to select the key where you want to store the number (1-9), press Select. If the entry is empty No Number will be displayed, press Edit. 4. Name is highlighted, enter the name and scroll d to highlight Number. 5. Enter the number and press Save. 6. Press e to return to standby. Note To dial a speed dial number, see page 16. 26 Call settings Edit / Delete a speed dial number 8.4 1. Press Menu, scroll d to Call Settings and press Select. 2. Scroll d to Speed Dial and press Select. 3. Scroll u or d to select the key where the number is stored, press Select. 4. Name is highlighted, press Clear to delete a character, or press and hold Clear to delete all characters. Edit the name if necessary. 5. Scroll d to the number, press Clear to delete a digit, or press and hold Clear to delete all digits. Edit the number if necessary and press Save. 6. Press e to return to standby. Call settings 27 Sound Ringer volume 9. Handset settings 9.1 9.1.1 The ring volume can be set to different volume levels. Choose from 5 volume levels or Off. 1. Press Menu, scroll d to Handset Settings and press Select. 2. Sound is highlighted. Press Select. 3. Ringer Volume is highlighted. Press Select. 4. Scroll u or d to the volume you require and press Select. 5. Press e to return to standby. Note You can also switch of the ringer off, by pressing and holding handset is in standby when the 9.1.2 Ringer melody You can set ringer melodies on your handset. Choose from 10 different melodies. While scrolling a sample ring will be heard for each melody. 1. Press Menu, scroll d to Handset Settings and press Select. 2. Sound is highlighted. Press Select. 3. Scroll d to Ringtone and press Select. 4. Scroll u or d to the ringtone you require and press Select. 5. Press e to return to standby. 9.1.3 Key beep When you press a button on the Motorola AXH01 handset, you will hear a beep. You can switch this beep on or off. 1. Press Menu, scroll d to Handset Settings and press Select. 2. Sound is highlighted. Press Select. 3. Scroll d to Key Beep and press Select. 4. Scroll u or d to On or Off and press Select. 5. Press e to return to standby. 28 Handset settings 9.1.4 Out of range tone When on a call if you move out of range of the base, you will hear a beep. You can switch this tone on or off. 1. Press Menu, scroll d to Handset Settings and press Select. 2. Sound is highlighted. Press Select. 3. Scroll d to Out Range Tone and press Select. 4. Scroll u or d to On or Off and press Select. 5. Press e to return to standby. 9.1.5 Cradle tone When you place the handset on the charger, you will hear a beep. You can switch this beep on or off. 1. Press Menu, scroll d to Handset Settings and press Select. 2. Sound is highlighted. Press Select. 3. Scroll d to Cradle Tone and press Select. 4. Scroll u or d to On or Off and press Select. 5. Press e to return to standby. 9.2 Display 9.2.1 Display contrast You can set the display contrast on the handset screen. 1. Press Menu, scroll d to Handset Settings and press Select. 2. Scroll d to Display and press Select. 3. Contrast is highlighted. Press Select. 4. Scroll u or d to the contrast you require and press Select. 5. Press e to return to standby. 9.2.2 Wallpaper Select from 2 different wallpapers for your handset or set to no wallpaper. 1. Press Menu, scroll d to Handset Settings and press Select. 2. Scroll d to Display and press Select. 3. Scroll d to Wallpaper and press Select. 4. Scroll u or d to the wallpaper you require and press Select. 5. Press e to return to standby. Handset settings 29 9.2.3 Display backlight You can set the amount of time before the backlight turns off. 1. Press Menu, scroll d to Handset Settings and press Select. 2. Scroll d to Display and press Select. 3. Scroll d to Backlight Timeout and press Select. 4. Scroll u or d to the time you require and press Select. 5. Press e to return to standby. Language 9.3 1. Press Menu, scroll d to Handset Settings and press Select. 2. Scroll d to Language and press Select. 3. Scroll u or d to the language you require and press Select. 4. Press e to return to standby. Registration 9.4 On the base:
Press and hold the p button on the base for 5 seconds. You have 120 seconds in which to register a handset. On the handset:
1. If the handset is not registered to a base, press Register. The screen displays Registering and once successful Registered will be displayed. If the handset is already registered to another base, press Menu, scroll d to Handset Settings and press Select. 2. 3. Scroll d to Registration and press Select. 4. Register is highlighted, press Select. 5. The screen displays Registering and once successful Registered will be displayed. Note If the PIN is no longer set to default (0000) then you will be prompted to enter the PIN to register the handset. A beep will be heard if the registration is successful. The handset is automatically assigned an available handset number. If registration is not successful the first time, please repeat the process again in case the base registration period ran out of time If you still cannot register a handset to the base please check how many handsets are already registered. The total number of handsets that can be registered to a base is dependent on the base. 30 Handset settings 9.5 De-registering a handset A handset can cancel any handset registered to the same base. This allows the handset to end the wireless connection with the system. 1. Press Menu, scroll d to Handset Settings and press Select. 2. Scroll d to Registration and press Select. 3. Scroll d to Unregister and press Select. 4. Enter the PIN and press Ok. 5. Scroll u or d to the handset that you want to de-register and press Select. 6. The display shows Unregister?, press Yes to de-register or No to cancel. 7. Press e to return to standby. 9.6 Handset name A personalized name can be set for each handset to easily distinguish between them. A name can be up to 16 characters. 1. Press Menu, scroll d to Handset Settings and press Select. 2. Scroll d to Handset Name and press Select. 3. The handset name is displayed, press Clear to delete a character, or press and hold Clear to delete all characters. Enter the new name and press Save. 4. Press e to return to standby. Restore to default settings 9.7 1. Press Menu, scroll d to Handset Settings and press Select. 2. Scroll d to Handset Setback and press Select. 3. Confirm? is displayed, Press Yes to confirm or No to cancel. 4. Press e to return to standby. Handset version 9.8 1. Press Menu, scroll d to Handset Settings and press Select. 2. Scroll d to Handset Version and press Select. 3. The software version will be displayed. 4. Press e to return to standby. Handset settings 31 10. Advanced settings Advanced settings availability are dependent on the CAT-iq base that is being used. 10.1 DECT settings 10.1.1 Change PIN Some functions are protected by a 4 digit PIN code which must be entered if the settings are changed. The default depends on the base. The PIN can be changed to a preferred number. When entering a PIN, the digits are shown as ****
1. Press Menu, scroll d to Advanced Settings and press Select. 2. DECT Settings is highlighted. Press Select. 3. Change PIN is highlighted. Press Select. 4. Enter the old PIN and press Ok. 5. Enter the new PIN and press Ok. 6. Re-enter the new PIN and press Save. 7. Press e to return to standby. 10.1.2 Clock master The phone can be set so that the base or handset can be the clock master, once set this will sync across all handset. 1. Press Menu, scroll d to Advanced Settings and press Select. 2. DECT Settings is highlighted. Press Select. 3. Scroll d to Clock Master and press Select. 4. Scroll u or d to Base or Handset and press Select. 5. Press e to return to standby. 10.1.3 ECO +
You can set the base ECO + mode via this menu, and the transmission power method depends on the base. 1. Press Menu, scroll d to Advanced Settings and press Select. 2. DECT Settings is highlighted. Press Select. 3. Scroll d to ECO + and press Select. 4. Scroll u or d to De-activate or Activate and press Select. 5. Press e to return to standby. 10.1.4 Base version 1. Press Menu, scroll d to Advanced Settings and press Select. 2. DECT Settings is highlighted. Press Select. 3. Scroll d to Base Version and press Select. 32 Advanced settings 4. The Firmware, EEPROM and Hardware Versions will be displayed. 5. Press e to return to standby. 10.1.5 Restore to default settings 1. Press Menu, scroll d to Advance Settings and press Select. 2. DECT Settings is highlighted. Press Select. 3. Scroll d to Base Setback and press Select. 4. Confirm? is displayed, Press Yes to confirm or No to cancel. 5. Press e to return to standby. Internal names 10.2 This will show you the list handsets registered to the base. 1. Press Menu, scroll d to Advance Settings and press Select. 2. Scroll d to Internal Names and press Select. 3. Scroll u or d to the required handset and press Option. Dial - to intercom the selected handset. Edit - to prevent a call from the selected handset being intercepted, and edit the handset name. Delete - to unregister the selected handset. 4. Press e to return to standby. 10.3 Line settings 10.3.1 Line name If you have multiple lines, each line can have a different name. 1. Press Menu, scroll d to Advance Settings and press Select. 2. Scroll d to Line Settings and press Select. 3. Enter the PIN and press Ok. 4. Scroll u or d to the required line and press Option. 5. Line Name is highlighted, press Select. 6. The line name is displayed, press Clear to delete a character, or press and hold Clear to delete all characters. Enter the new name and press Save. 7. Press e to return to standby. 10.3.2 Line ID 1. Press Menu, scroll d to Advance Settings and press Select. 2. Scroll d to Line Settings and press Select. 3. Enter the PIN and press Ok. 4. Scroll u or d to the required line and press Option. 5. Scroll d to Line ID and press Select. 6. The line ID is displayed. Advanced settings 33 7. Press e to return to standby. 10.4 Line selection When making calls you can pre set the line selection to auto, manual or individual line selection. 1. Press Menu, scroll d to Advance Settings and press Select. 2. Scroll d to Line Selection and press Select. 3. Scroll u or d to select Manual, Auto or the desired named line and press Select. 4. Press e to return to standby. 10.5 Default settings Contact list Ring volume Ring tones Key tone Out of range tone Cradle tone Handset name Date & time Auto answer Auto hang-up Alarm Caller list Redial list Receiver/speaker volume Line selection Speed dial Unchanged 3 1 On Off On Supplied by the base 01-01-2016, 12:00 Off On Off base dependent base dependent 3 Auto Unchanged 34 Advanced settings 11. Technical Specifications RF frequency band 1921.536 - 1928.448MHz Channels Operation temperature Base voltage (AC voltage, 50Hz/60Hz) 5 10 - 40oC 100V - 230V AC Base voltage (Adaptor output) 5VDC/1A Handset voltage 750mAh 1.2Vx2 AAA Ni-MH battery Charger voltage (Adaptor output) 6VDC/0.4A Technical Specifications 35 12. Help Unable to open the Alexa App Force close the app. Restart your cell phone. Uninstall and reinstall the app. For further help you can go to Apple or Google support. iOS - https://getsupport.apple.com/
Android - https://support.google.com/android/
No dial tone Use only the telephone line cord supplied. Check that the telephone line cord is connected properly. Check that the AC power is connected properly and switched on. No display Check that the batteries are inserted correctly and fully charged. Use only approved rechargeable batteries supplied. Check that the handset is switched on. Press and hold e. Reset the unit by removing the batteries and disconnecting the AC power. Wait for around 15 seconds before connecting it again. Allow up to one minute for the handset and base to synchronize. LCD does not light up during operation Battery charge is low. Fully charge the batteries. Signal icon is not white Handset is out of range. Move closer to the base. Check that the AC power is connected properly. Keypad does not seem to work Check that the keypad lock is not on. Battery icon is not scrolling during charge Adjust the handset slightly on the charger. Clean the charging contacts with a cloth moistened with alcohol. Check that the charger power is connected properly. The battery is full. The battery icon will appear steady on the display. No Caller Display Check with your network operator. The caller may have withheld their number. Caller Display doesnt show the name of the caller The record cannot be found in the contact list. Check that the correct name/number is stored in the contact list, with the full area code. Cannot register a handset to the base The number of handsets that can be registered is dependent on the base. Check that correct PIN code (default is dependent on the base) has been entered. 36 Help Handset does not ring The handset ringer volume may be set to Off. Check the handset is saved as an attached handset for the line being called. Noise interference on my phone or on other electrical equipment nearby Place the phone at least one meter away from electrical appliances or any metal obstructions to avoid any risk of interference. Help 37 13. General information Important This equipment is not designed to make emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in the US. Important safety instructions Follow these safety precautions when using your phone to reduce the risk of fire, electric shock, and injury to persons or property:
Keep all slits and openings of the phone unblocked. Do not set the phone on a heating register or over a radiator. Ensure that proper ventilation is provided at the installation site. Do not use while wet or while standing in water. Do not use this product near water (for example, near a bath tub, kitchen sink, or swimming pool). Do not allow anything to rest on the power cord. Place the power cord so that it will not be walked on. Never insert objects of any kind into the product vents as that may result in fire or electric shock. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not disassemble this product. If service or repair work is required, contact the customer service helpline found in this users Guide. Do not overload wall outlets and extension cords. Avoid using during an electrical storm. Use a surge protector to protect the equipment. Do not use this phone to report a gas leak, especially if you are in the vicinity of the gas line. Important To reduce the risk of fire, use only the supplied AC power adaptor. Unplug this phone immediately from an outlet if:
The power cord or plug is damaged or frayed. Liquid has been spilled on the product. The product has been exposed to rain or water. Do not retrieve the base or charger until after you have unplugged the power the wall. Then retrieve the unit by the unplugged cords. The product has been dropped or the cabinet has been damaged. The product exhibits a distinct change in performance. 38 General information Installation Guidelines Read and understand all instructions and save them for future reference. Follow all warnings and instructions marked on the product. Do not install this product near a bath tub, sink, or shower. Operate this phone using only the power source that is indicated on the marking label. If you are unsure of the power supply to your home, consult with your dealer or local power company. Do not place this product on an unstable cart, stand, or table. This product may fall, causing serious damage to the product. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work to restore the product to normal operation. Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents to clean this phone. Use only the power supply that came with this unit. Using other power supplies may damage the unit. Battery Safety Instructions Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be released, resulting in injury. Important There is a risk of explosion if you replace the battery with an incorrect battery type. Use only the batteries that came with your phone or an authorized replacement recommended by the manufacturer. Keep batteries out of the reach of children. Remove batteries if storing over 30 days. Do not dispose of batteries in fire, which could result in explosion. The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. Refer to your batterys label for battery type. Contact your local recycling center for proper disposal methods. Save these instructions Cleaning Clean the phone with a damp (not wet) cloth, or an anti-static wipe. Never use household polish as this will damage the product. Never use a dry cloth as this may cause static shock. General information 39 Environmental Do not expose to direct sunlight. The phone may become warm when the batteries are being charged or during prolonged periods of use. This is normal. However, we recommend that to avoid damage, do not place the product on antique / veneered wood. Do not place your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surfaces. Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as bathrooms. Do not expose your product to fire, explosives or other hazardous conditions. There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug the power cord during an electrical storm. Product disposal instructions Product disposal instructions for residential users When you have no further use for it, please remove any batteries and dispose of them and the product according to your local authoritys recycling processes. For more information, please contact your local authority or the retailer where the product was purchased. Product disposal instructions for business users Business users should contact their suppliers and check the terms and conditions of the purchase contract and ensure that this product is not mixed with other commercial waste for disposal. Consumer Products and Accessories Warranty Thank you for purchasing this Motorola branded product manufactured under license by Meizhou Guo Wei Electronics Co. Ltd., AD1 section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China.
(MZGW) What Does this Warranty Cover?
Subject to the exclusions contained below, MZGW warrants that this Motorola branded product (Product) or certified accessory (Accessory) sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Limited Warranty is your exclusive warranty and is not transferable. Who is covered?
This warranty extends only to the first consumer purchaser, and is not transferable. 40 General information What will MZGW do?
MZGW or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this limited warranty. We may use functionally equivalent reconditioned / refurbished / pre-owned or new Products, Accessories or parts. What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR MZGW BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another. Products Covered Consumer Products Consumer Accessories (battery, power supply(s) and line cords) Consumer Products and Accessories that are Repaired or Replaced Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. General information 41 Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage
(cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola or MZGW are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, MZGW or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information?
To obtain service or information, please call: xxxxxxxxxx. You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a MZGW Authorized Repair Center. To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number. 42 General information FCC, ACTA and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device. General information 43 FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments
(ACTA). This Product Complies With 47CFR PART 68. The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the Users Guide. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your local telephone company. This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty. If this equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service. The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone company is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. 44 General information Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 0.0B. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five. This equipment meets the applicable Industry Canada Terminal Equipment &
Technical Specifications. Placing the receiver slightly above the ear may result in better performance for hearing aids with microphones positioned behind the ear. General information 45 FCC Exposure to Radio Frequency (RF) Signals For Handset This is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limitsfor exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons,regardless of age and health. This device and its antenna must not be co-
located or operating in conjunction with any other antenna or transmitter. This product has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE 1528. For Base This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 14. Wall mounting Important Before you wall mount your AXH base, check that you are not drilling into any hidden wiring or pipes. Before you drill, make sure all the cables will reach the router, telephone socket and AC outlet. 1. Use the following templates to mark the drilling locations. 6.6cm To wall-mount the base, drill two holes in the wall 6.6cm apart horizontally using an 5mm drill bit. 6.6cm 46 Wall mounting 2. Insert the wall plugs if necessary, then insert the screws leaving about 5mm protruding from the wall on which to hang the phone. 3. Slot the holes on the back of the base over the screw heads and gently pull the base/charger down to make sure it is securely in place. Wall mounting 47 Importers Address Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. 2018 Motorola Mobility LLC. All rights reserved. Version Draft.3 (EN_US)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-01-03 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-01-03
|
||||
1 | Applicant's complete, legal business name |
Meizhou Guo Wei Electronics Co., Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027997733
|
||||
1 | Physical Address |
AD1 Section, Economic Development Area
|
||||
1 |
Meizhou, Guangdong, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ARRB
|
||||
1 | Equipment Product Code |
AXB
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R**** L******
|
||||
1 | Title |
Engineering Manager
|
||||
1 | Telephone Number |
0755-********
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
r******@sgwglobal.com.cn
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PUB - Part 15 Unlicensed PCS Base Station | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Cordless Telephone | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Output power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bay Area Compliance Laboratories Corp. (Shenzhen)
|
||||
1 | Name |
W******** W******
|
||||
1 | Telephone Number |
+86 (********
|
||||
1 |
q******@baclcorp.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15D | 1921.53600000 | 1928.44800000 | 0.0940000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC