FCC ID: 2ARRB-VM483PU Digital Video Baby Monitor

 

VM483

2.8" Video Baby Monitor

For: VM483, VM483-2, VM483-3 and VM483-4

User Guide

Welcome...

to your new Motorola Digital Video Baby Monitor!

Thank you for purchasing the VM483. Now you can see and hear your baby

sleeping in another room or you can monitor your older children in their

playroom.

Please retain your original dated sales receipt for your records. For

warranty service of your Motorola product, you will need to provide a copy

of your dated sales receipt to confirm warranty status. Registration is not

required for warranty coverage.

For product related questions, please contact us by visit at:

motorolanursey.com

This User's Guide provides you with all the information you need to get the

most from your product.

Before you can use the baby monitor, we recommend you insert and fully

charge the battery in the Parent Unit, so that it continues to work if you

disconnect it from the power supply to carry it to another location. Please

read the Safety Instructions on pages 7 - 9 before you install the units.

Got everything?

• 1 x Parent Unit

• 1 x Baby Unit (Camera)

• 1 x Rechargeable Li-ion battery pack for the Parent Unit

• 1 x Battery door for Parent Unit

• 2 x Power adapters for the Parent and Baby units

In multi-camera packs, you will find one or more additional baby units with

power adapter units.

Overview of the Parent Unit

5

6

7

8

1. Power ON/OFF button 0

Press and hold to turn the Parent Unit

on or off.

Press to turn the screen off. (Press

any button to turn screen back on.)

Sound Level indicators

Show the sound level detected by

the Baby Unit - the louder the sound

detected, the more LEDs light up.

2.

3. Control key panel

UP / VOLUME+

When in monitor mode, press to

increase speaker volume. When in a

menu, press to move up. When in

zoom mode, press and hold to move

up the image.

DOWN / VOLUME -

When in monitor mode, press to

decrease speaker volume. When in a

menu, press to move down. When in

zoom mode, press and hold to move

down the image.

BACK / LEFT <

When in zoom mode, press to return

to normal mode, or press and hold to

move left across the image. When in

the main menu, press to move to the

option to the left. When in a menu,

press to return to the previous

screen.

ZOOM / RIGHT

When in the main menu, press to

move to the option on the right.

When viewing an image, press to

>

1

2

3

4

zoom in. When in zoom mode, press

and hold to move right across the

image.

O

When in a menu, press to choose an

item, or save a setting.

4. TALK BACK T

Press and hold to talk back to the

Baby Unit.

5. Power/Link indicator

Lights up in green when the Parent

Unit is turned on.

Flashes in green when the Parent

Unit is searching for the Baby Unit, or

is in pairing mode.

6. AC power/Battery status indicator

Lights up in red when AC power is

connected and the Parent Unit’s

battery is being charged.

Flashes in red when the Parent Unit’s

battery is low and needs charging.

Off when the Parent Unit’s battery is

not being charged.

7. Display (LCD screen)

8. Main menu button M

Press to open or close the menu

options.

Parent Unit menu and status icons

Connection Status (4 Levels)

Indicates the signal strength between the Baby Unit and Parent Unit,

with more bars for a stronger signal.

displays when the link between the Parent Unit and the Baby

Unit is lost.

Patrol mode (for multi-cameras only)

- Displays when the Parent Unit is in patrol mode.

Current view status

- Indicates the number of the Baby Unit that is being viewed in fixed

or patrol mode.

Zoom Select

- Displays when in Zoom mode.

Alarm menu (6h, 5h, 4h, 3h, 2h, OFF)

Displays in the center of the screen when the alarm is sounding.

Night Vision Mode (Video also changes to Black/White)

Volume Level Control (5 levels + Off)

Volume off

- Displays when the volume is turned off.

20°C

or

69°F

Temperature (in oC or oF)

- Displays the current temperature detected by the Baby Unit

Battery Level Indication (4 Levels)

>

-

>

>

scrolls when the battery is charging.

-

-

displays when the battery is fully charged.

displays when the battery is low and needs charging.

displays when you do not have a battery installed or it is

-

installed incorrectly, and is operating on AC power only.

Brightness Level Control (5 Levels)

Add Camera

Delete Camera

Overview of Your Baby Unit

2

3

4

1

5

6

7

8

9

1. Power ON/OFF switch

6. Power/Link indicator

Slide to turn the Baby Unit on or off.

2. Microphone

3.

For transmitting sound to the Parent

Unit.

Infra-red LEDs

6 infra-red LEDs for night vision.

(Note: picture will not be in colour

for night vision.)

Light Sensor (Night Vision Mode)

For detecting when to switch on the

infra-red LEDs.

5. Camera Lens

4.

For transmitting video to the Parent

Unit.

Lights up in green when the

Baby Unit is turned on and

linked to the Parent Unit.

Flashes in green when the Baby

Unit is searching for the Parent

Unit, or in pairing mode.

Off when the Baby Unit is

powered off.

7. PAIR Key

Press and hold to pair with a

Parent Unit.

8. Power Adapter Socket

9. Temperature Sensor

Important guidelines for installing your Baby Monitor

• To use your Video Monitor Baby and the Parent Unit together, you must be

able to establish a radio link between them, and the range may be affected

by environmental conditions.

• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic

doors or reinforced concrete between the Baby and Parent Units may block

the radio signal.

• The signal strength may also be reduced by other solid structures, like walls

or electrical equipment, such as radios, TVs, computers, cordless or mobile

phones, fluorescent lights or dimmer switches.

• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers),

Bluetooth® systems, or microwave ovens, may cause interference with this

product, so keep the Baby Monitor at least 1.5 metres (5 feet) from these

types of products, or turn them off if they appear to be causing interference.

If the signal is weak, try moving the Parent and/or the Baby Unit to different

positions in the rooms.

•

Table of contents

2.1

2.2

2.3

2.4

3.1

3.2

3.3

3.4

3.5

1. Safety Instructions ..................................................................................... 7

2. Getting Started........................................................................................ 10

Baby Unit Power Supply............................................................................ 10

Parent Unit Battery Installation .................................................................. 11

Parent Unit Power Supply ......................................................................... 12

Desktop Stand of the Parent Unit ............................................................. 13

3. Using the Baby Monitor........................................................................... 14

Setting Up.................................................................................................. 14

Power On or Off the Baby Unit ................................................................. 14

Power On or Off the Parent Unit .............................................................. 14

Night Vision Mode .................................................................................... 15

Turn off Parent Unit LCD Screen .............................................................. 15

4. Parent Unit Menu Options ...................................................................... 16

Adjust Speaker Volume ............................................................................ 16

4.1

LCD Brightness ......................................................................................... 16

4.2

4.3

Set Alarm Time on the Parent Unit............................................................ 16

4.4 Monitor the Temperature ......................................................................... 17

Remove a Baby Unit from the Parent Unit................................................ 18

4.5

Set Screen Off time for the Parent Unit .................................................... 18

4.6

Zoom, Pan or Tilt ....................................................................................... 18

4.7

4.8

Pair and Replace a Baby Unit .................................................................... 19

4.9 Multi-Camera Use ..................................................................................... 19

5. Disposal of the Device (environment) .................................................... 20

6. Cleaning .................................................................................................. 21

7. Troubleshooting ...................................................................................... 22

8. General Information ................................................................................ 24

9. Technical Specifications ......................................................................... 30

6

Table of contents

1. Safety Instructions

WARNING:

Strangulation Hazard: Children

have STRANGLED in cords. Keep

this cord out of the reach of

children (more than 3ft away). Do

not remove this tag. Never use

extension cords with AC

Adapters. Only use the AC

Adapters provided.

Safety Instructions

7

BABY UNIT SET UP & USE:

• Determine a location for the Baby Unit that will provide the best view

of your baby in his/her crib.

• Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf

or mount the Unit to a wall securely using the keyhole slots in the

underside of the stand.

• NEVER place the Baby Unit or cords within the crib.

WARNING

This Baby Monitor is compliant with all relevant standards regarding

electromagnetic fields and is, when handled as described in the User's Guide,

safe to use. Therefore, always read the instructions in this User's Guide carefully

before using the device.

• Adult assembly is required. Keep small parts away from children when

assembling.

• This product is not a toy. Do not allow children to play with it.

• This Baby Monitor is not a substitute for responsible adult supervision.

• Keep this User's Guide for future reference.

• Do not place the Baby Unit or cords in the crib or within reach of the baby

(the Unit and cords should be more than 1 meter away).

• Keep the cords out of reach of children.

• Do not cover the Baby Monitor with a towel or blanket.

• Test this monitor and all its functions so that you are familiar with it prior to

actual use.

• Do not use the Baby Monitor in damp areas or close to water.

• Only use the chargers and power adapters provided. Do not use other

chargers or power adapters as this may damage the device and battery pack.

8

Safety Instructions

• Only insert a battery pack of the same type.

• Do not touch the plug contacts with sharp or metal objects.

• Connect the power adapters to easily accessible electrical outlets.

CAUTION

Risk of explosion if battery is replaced by an incorrect type. Dispose of

used batteries according to their instructions.

Use only the rechargeable battery pack with rating: 3.7V 1200mAh

Safety Instructions

9

2. Getting Started

2.1

Baby Unit Power Supply

ON/OFF

switch

1.

Insert the DC plug of the power adapter into the DC socket on the back of

the Baby Unit.

2. Connect the other end of the power adapter to a suitable electrical outlet.

Slide the ON/OFF switch to the ON position. The power LED lights up in

3.

green, or flashes if searching for the Parent Unit.

Slide the ON/OFF switch to the OFF position to switch off the Baby Unit.

4.

NOTE

Only use the supplied power adapter (5V DC / 1000mA).

10

Getting Started

Parent Unit Battery Installation

2.2

A rechargeable battery pack is supplied and should be installed and charged, so

that the Parent Unit can be moved without losing the link and picture from the

Baby Unit(s).

Charge the battery in the Parent Unit before using it for the first time or when the

Parent Unit indicates that the battery is low (flashes in red).

1. Remove the battery compartment cover.

2.

Insert the plug of the battery pack into the socket inside the battery

compartment, and fit the battery pack into the compartment.

3. Replace the battery compartment cover, and pull out the desktop stand

(refer to section 2.4).

Getting Started

11

2.3

Parent Unit Power Supply

1.

Insert the DC plug of the power adapter into the DC socket on the side of

the Parent Unit.

2. Connect the other end of the power adapter to a suitable electrical outlet.

The AC power/battery status indicator lights up in red.

IMPORTANT

Only use the supplied power adapter and battery pack. While the Parent Unit

can work with the power adapter connected, without a battery pack, it is

recommended that you install and charge the rechargeable battery pack fully

before use. This will allow the Parent Unit to operate on battery in the event of a

power failure, or when moving to a different room.

3. Once the Baby and Parent Units are both switched ON, the power/link

indicator will light up green and the display on the Parent Unit will show the

color image captured by the Baby Unit. But if the room is dark, the image

will be displayed in black and white and with a

icon, due to infra-red

illumination by the Baby Unit.

If there is no connection or you are out of range, the power/link indicator

will flash green and the display will change to the Motorola screen and the

symbol

closer to the Baby Unit to re-establish the link.

will flash in the center of the screen. Move the Parent Unit

4.

12

Getting Started

2.4

Desktop Stand of the Parent Unit

Flip out the stand on the back of the Parent Unit to set up the desktop stand.

Getting Started

13

3. Using the Baby Monitor

Please read these instructions carefully, and be aware that this baby monitor is

only intended as an aid. It is not a substitute for responsible adult supervision.

Setting Up

3.1

• Make sure that the Baby Unit and Parent Unit are both switched on.

• Place the Baby Unit in a convenient location (e.g. on a table) and point the

camera lens towards the area you want to monitor.

NOTE

Do not place the Baby Unit within reach of a child or baby! If there is

interference with the picture or sound, try moving the units to different locations,

and ensure that they are not close to any other electrical equipment.

If you place the Parent Unit and Baby Unit too close together, you may hear a

high pitched noise. This is not a fault. The units are designed to be operated at

some distance apart. So move the units further apart.

Power On or Off the Baby Unit

3.2

Slide the ON/OFF switch to the On position to turn on the Baby Unit.

The Power/Link indicator lights up in green.

Slide the Power ON/OFF switch to the Off position to turn off the Baby Unit.

The Power/Link indicator goes off.

Power On or Off the Parent Unit

to turn on the Parent Unit. The Power/Link indicator lights

to turn off the Parent Unit. The Power/Link indicator goes

3.3

Press and hold

up in green.

Press and hold

off.

NOTE

If you place the Parent and Baby Units too close together, you may hear a high

pitched noise. This is not a fault. The units are designed to be operated at some

distance apart, e.g. in separate rooms, so move the units further apart.

14

Using the Baby Monitor

Night Vision Mode

3.4

The Baby Unit has 6 high-intensity infrared LEDs for picking up clear images in

the dark. When the built-in photo sensor on the front of the unit detects a low

level of ambient light, the LEDs will automatically activate and the screen on the

icon will be displayed at the

Parent Unit will display in black and white. The

top of the screen.

Turn off Parent Unit LCD Screen

3.5

You can turn off the Parent Unit screen without switching off the Parent Unit.

When the screen is turned off, you can still hear sound from the Baby Unit.

Press the POWER ON/OFF button

screen, but still leave the audio monitor on.

on the Parent Unit to turn off the LCD

Press any key on the Parent Unit to turn on the screen again.

Using the Baby Monitor

15

4. Parent Unit Menu Options

4.1

Adjust Speaker Volume

You can adjust the speaker volume from Volume 1 to Volume 5, or turn it off. Press

+ or - on the Parent Unit when it is in camera viewing mode. When the

speaker volume is set to off, the screen displays

.

LCD Brightness

4.2

You can adjust the brightness of the Parent Unit screen from Level 1 to Level 5.

1. Press M when the Parent Unit is in camera viewing mode to show the menu

displayed in red.

options with

2. Press O, then

3. Press O to confirm your selection.

or

to adjust the brightness.

Set Alarm Time on the Parent Unit

4.3

You can use the Parent Unit to set the alarm as a reminder for you to take care of

your baby.

If an alarm time is selected, the Parent Unit emit multiple beeps repeatedly at the

end of the selected 2, 3, 4, 5 or 6 hour period, and the alarm icon will appear in the

center of the screen. The alarm can be cancelled by pressing any button, except

the Power ON/OFF button

, on the Parent Unit.

Turn on and set the alarm when it is currently off:

1. Press M when the Parent Unit is in camera viewing mode.

2. Press < or

3. Press O, then

4. Press

5. Press O to confirm your selection.

to choose On, then press O.

to choose 2h, 3h, 4h, 5h or 6h.

to scroll to

or

or

.

Turn off the alarm when it is currently on:

1. Press M when the Parent Unit is in camera viewing mode.

2. Press < or

3. Press O, then

4. Press O to confirm your selection.

to scroll to

or

to choose Off.

.

16

Parent Unit Menu Options

Set lullaby

4.3.1

You can play calming sounds on the Baby Unit to comfort your baby.

1. Press M when the Parent Unit is in camera viewing mode.

2. Press < or

3. Press O, then

4. Press O to confirm your selection.

to choose your desired lullaby.

to scroll to

or

.

4.4 Monitor the Temperature

Your Baby Unit measures the surrounding temperature. If the detected

temperature goes outside a selected temperature range, you can set the Parent

Unit to emit an alert tone and show a warning message on the screen. You can

change the settings for the temperature format, range, and alert as follows:

4.4.1 Temperature Format

You can choose to display the temperature in °F or °C.

1. Press M when the Parent Unit is in camera viewing mode.

2. Press < or

3. Press O, then

4. Press

5. Press O to confirm your selection.

to scroll to

or

to choose °F or °C.

to scroll to

or

.

and press the O button.

4.4.2 Temperature Range

You can set the maximum (25 - 39oC/77 - 102oF) and minimum (10 - 24oC/50 -

76oF) values for the temperature, so that when the room temperature goes

outside the temperature range, you will receive an alert if the Temperature Alert

is set on.

1. Press M when the Parent Unit is in camera viewing mode.

2. Press < or

3. Press O, then

4. Press

to scroll to MAX for the maximum temperature, or MIN for the

and press the O button.

to scroll to

or

to scroll to

.

or

minimum temperature.

or

5. Press O, then

O to confirm your selection.

to select the MAX or MIN temperature and press

Parent Unit Menu Options

17

4.4.3 Temperature Alert

You can set whether to receive a visual and audible alert when the room

temperature goes outside the selected temperature range.

1. Press M when the Parent Unit is in camera viewing mode.

2. Press < or

3. Press O, then

to choose On or Off.

4. Press

5. Press O to confirm your selection.

and press the O button.

to scroll to

or

to scroll to

or

.

4.5

Remove a Baby Unit from the Parent Unit

1. Press M when the Parent Unit is in camera viewing mode.

2. Press < or

3. Press O, then

4. Press O, then press < or

5. Press O to confirm your selection.

NOTE

You cannot remove a Baby Unit if it is the only one paired.

to scroll to

or

to choose YES or NO.

.

to select the desired Baby Unit (cam 1, 2, 3 or 4).

Set Screen Off time for the Parent Unit

4.6

You can set the screen off time for the Parent Unit after it is in idle mode for a

specific time interval.

1. Press M when the Parent Unit is in camera viewing mode.

2. Press < or

3. Press O, then

4. Press O to confirm your selection.

to select (60mins, 30mins, 5mins or OFF).

to scroll to

or

.

Zoom, Pan or Tilt

4.7

You can zoom in or out while viewing the image from a Baby Unit.

1. Press

2. Press and hold <,

to zoom in.

,

or down correspondingly.

3. Press < to zoom out.

or

to move the zoomed image left, right, up

18

Parent Unit Menu Options

Pair and Replace a Baby Unit

4.8

The Baby Units and Parent Unit provided are already paired. You can add or

replace a Baby Unit in your video and audio monitoring system.

You can pair a maximum of four Baby Units to your Parent Unit. Each new Baby

Unit must be paired to the Parent Unit before use.

To pair and replace a Baby Unit:

1. Press M when the Parent Unit is in camera viewing mode.

2. Press < or

3. Press O, then

to scroll to

or

.

to choose a desired Baby Unit number, then

press O. The pairing mode starts.

4. Turn on the new Baby Unit, and then immediately press and hold PAIR until

the Power/Link indicator turns on. The unit will beep and the picture from

the new camera will appear on the screen.

NOTE

You cannot choose a Baby Unit number that is already occupied, and it must be

removed before the new Baby Unit can replace the existing Baby Unit.

4.9 Multi-Camera Use

You can pair up to 4 cameras with the Parent Unit. If more than one camera is

paired with the Parent Unit, you can select which camera to view or set it in

Patrol mode

cameras about every 10 seconds.

, where the Parent Unit automatically cycles through the paired

NOTE

The audio from a camera can only be heard on the Parent Unit when that

camera is selected.

To change the camera being viewed:

Press O when the Parent Unit is in camera viewing mode to step through the

paired cameras, 1, 2, 3, 4,

, with the selected option shown on the screen.

Parent Unit Menu Options

19

5. Disposal of the Device (environment)

At the end of the product’s life cycle, you should not dispose of

this product with normal household waste. Take this product to

a collection point for the recycling of electrical and electronic

equipment. The symbol on the Product, User’s Guide and/or

box indicates this.

Some of the product materials can be reused if you take them to

a recycling point. By reusing some parts or raw materials from used products

you make an important contribution to the protection of the environment.

Please contact your local authorities in case you need more information on the

collection points in your area.

Dispose of the battery pack in an environmentally-friendly manner according to

your local regulations.

20

Disposal of the Device (environment)

6. Cleaning

Clean your Baby Monitor with a slightly damp or anti-static cloth.

Never use cleaning agents or abrasive solvents.

Cleaning and care

• Do not clean any part of the product with thinners or other solvents and

chemicals –- this may cause permanent damage to the product which is not

covered by the Warranty.

• Keep your Baby Monitor away from hot, humid areas or conditions, strong

sunlight and avoid moisture.

• Every effort has been made to ensure high standards of reliability for your

Baby Monitor. However, if something does go wrong, please do not try to

repair it yourself – contact Customer Service for assistance.

IMPORTANT

Always switch off and disconnect the power adapter before cleaning your baby

monitor.

Cleaning

21

7. Troubleshooting

Power/Link Indicator on the Parent Unit does not come on

• Check whether the Parent Unit is powered on.

• Check whether the supplied battery pack is correctly installed and that it is

charged.

• Recharge the Parent Unit by connecting it to the power supply.

Power/Link Indicator on the Baby Unit flashes

• The Baby Unit may not be paired with the Parent Unit. Refer to section 4.8 to

pair the Baby Unit.

• The Parent Unit and the Baby Unit may be out of range with each other.

Reduce the distance between the units, but not closer than 1 meter.

• The Baby Unit may be switched off. Slide the ON-OFF switch on the Baby

Unit to the ON position.

icon on the Parent Unit flashes

• Battery pack in the Parent Unit is running low. Connect the Parent Unit to the

electrical outlet with the supplied power adapter for recharging.

The Parent Unit beeps

• The Parent Unit may have lost connection with the Baby Unit. Reduce the

distance between the Parent Unit and the Baby Unit, but not closer than 1

meter.

• The Baby Unit may be switched off. Slide the ON-OFF switch on the Baby

Unit to the ON position.

• Battery pack in the Parent Unit is running low. Connect the Parent Unit to the

electrical outlet with the supplied power adapter for recharging.

• The Alarm is sounding. Press any button to reset the alarm, and turn it off

from the menu if not required.

• The Temperature Alert is sounding. Check the temperature, and adjust the

alert limits, if necessary, or turn it off from the menu if not required.

22

Troubleshooting

Cannot hear sound or baby crying from the Parent Unit

• The volume level in the Parent Unit may be set too low. Increase the volume

level of the Parent Unit. Refer to section 4.1 for volume level settings.

• The Parent Unit and the monitoring Baby Unit may be out of range with each

other. Reduce the distance between the units, but not closer than 1 meter.

The baby monitor system produces a high-pitched noise

• The Parent Unit and the Baby Unit are too close to each other. Make sure the

Parent Unit and Baby Unit are at least 1 meter away from each other.

• The speaker volume of the Parent Unit may be set too high. Decrease the

volume of the Parent Unit.

Battery pack in the Parent Unit is running low quickly

• The LCD brightness may be set too high. Try to decrease the brightness

level. Refer to section 4.2 for details.

• The volume level of the Parent Unit may be set too high, which consumes

power. Decrease the volume level of the Parent Unit. Refer to section 4.1 for

volume level settings.

Parent Unit image is not in color

• The Baby Unit is in a dark room, which causes the infra-red illumination to

turn on and the picture image to change from color to black and white.

When the room becomes brighter, the picture will return to color.

Troubleshooting

23

8. General Information

lf your product is not working properly....

1. Read this User’s Guide or the Quick Start Guide.

2. Visit our website: motorolanursery.com/support

To order a replacement battery pack, contact customer service.

Consumer Products and Accessories Limited Warranty

("Warranty")

Thank you for purchasing this Motorola branded product manufactured under

license by Meizhou Guo Wei Electronics Co. LTD ("MZGW").

What Does this Warranty Cover?

Subject to the exclusions contained below, MZGW warrants that this Motorola

branded product ("Product") or certified accessory ("Accessory") sold

for use with this product is manufactured to be free from defects in materials and

workmanship under normal consumer usage for the period outlined below. This

Warranty is your exclusive warranty and is not transferable.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY

HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY.

FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION

LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF

DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS

CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL

RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION

LAWS AND REGULATIONS. FOR A FULL UNDERSTANDING OF YOUR

RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR COUNTRY,

PROVINCE OR STATE.

Who is covered?

This Warranty extends only to the first consumer purchaser, and is not transferable.

24

General Information

What will MZGW do?

MZGW or its authorized distributor at its option and within a commercially

reasonable time, will at no charge repair or replace any Products or Accessories

that do not conform to this Warranty. We may use functionally equivalent

reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS

LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT

PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE

REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR

MZGW BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING

NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF

THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,

SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF

REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR

OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE

ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE

FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.

Some jurisdictions do not allow the limitation or exclusion of incidental or

consequential damages, or limitation on the length of an implied warranty, so

the above limitations or exclusions may not apply to you. This Warranty gives

you specific legal rights, and you may also have other rights that vary from one

jurisdiction to another.

General Information

25

Products Covered

Consumer Products

Consumer Accessories

Consumer Products and Accessories

that are Repaired or Replaced

Length of Coverage

Two (2) years from the date of the

Products’ original purchase by the first

consumer purchaser of the product.

Ninety (90) days from the date of the

Accessories’ original purchase by the

first consumer purchaser of the

product.

The balance of the original warranty or

for Ninety (90) days from the date

returned to the consumer, whichever is

longer.

Exclusions

Normal Wear and Tear. Periodic maintenance, repair and replacement of parts

due to normal wear and tear are excluded from coverage.

Batteries. Only batteries whose fully charged capacity falls below 80% of their

rated capacity and batteries that leak are covered by this Warranty.

Abuse & Misuse. Defects or damage that result from: (a) improper operation,

storage, misuse or abuse, accident or neglect, such as physical damage (cracks,

scratches, etc.) to the surface of the product resulting from misuse; (b) contact

with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the

like, extreme heat, or food; (c) use of the Products or Accessories for

commercial purposes or subjecting the Product or Accessory to abnormal

usage or conditions; or (d) other acts which are not the fault of MOTOROLA or

MZGW, are excluded from coverage.

Use of Non-Motorola branded Products and Accessories. Defects or damage

that result from the use of Non-Motorola branded or certified Products or

Accessories or other peripheral equipment are excluded from coverage.

Unauthorized Service or Modification. Defects or damages resulting from

service, testing, adjustment, installation, maintenance, alteration, or

modification in any way by someone other than MOTOROLA, MZGW or its

authorized service centers, are excluded from coverage.

26

General Information

Altered Products. Products or Accessories with (a) serial numbers or date

tags that have been removed, altered or obliterated; (b) broken seals or

that show evidence of tampering; (c) mismatched board serial numbers;

or (d) nonconforming or non-Motorola branded housings, or parts, are excluded

from coverage.

Communication Services. Defects, damages, or the failure of Products or

Accessories due to any communication service or signal you may subscribe to

or use with the Products or Accessories is excluded from coverage.

How to Obtain Warranty Service or Other Information?

To obtain service or information, please visit us at: motorolanursery.com/support

You will receive instructions on how to ship the Products or Accessories at your

expense and risk, to a MZGW Authorized Repair Center.

To obtain service, you must include: (a) the Product or Accessory; (b) the

original proof of purchase (receipt) which includes the date, place and seller of

the Product; (c) if a warranty card was included in your box, a completed

warranty card showing the serial number of the Product; (d) a written

description of the problem; and, most importantly; (e) your address and

telephone number.

These terms and conditions constitute the complete warranty agreement

between you and MZGW regarding the Products or Accessories purchased by

you, and supersede any prior agreement or representations, including

representations made in any literature publications or promotional materials

issued by MZGW or representations made by any agent employee or staff of

MZGW, that may have been made in connection with the said purchase.

General Information

27

FCC and IC regulations

FCC Caution:

Any Changes or modifications not expressly approved by the

party responsible for compliance could void the user's

authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation.

IMPORTANT NOTE:

Note: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for

help.

28

General Information

ISED Warning

This device complies with Innovation, Science, and Economic

Development Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including

interference that may cause undesired operation of the

device.

Le présent appareil est conforme aux CNR d' Innovation,

Sciences et Développement économique Canada applicables

aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible

d'en compromettre le fonctionnement.

Radiation Exposure Statement:

The baby unit complies with FCC/ISED radiation exposure

limits set forth for an uncontrolled environment. The baby

unit should be installed and operated with minimum distance

20cm between the radiator& your body.

The parent unit has been tested and comply with FCC and

ISED SAR limits.

Déclaration d'exposition aux radiations:

L'unité bébé est conforme aux limites d'exposition aux

rayonnements FCC / ISED établies pour un environnement

non contrôlé. L'unité bébé doit être installée et utilisée avec

une distance minimale de 20 cm entre le radiateur et votre

corps.

L'unité parent a été testée et est conforme aux limites SAR

FCC et ISED.

General Information

29

9. Technical Specifications

Baby Unit

2405 - 2475 MHz

Frequency

Operating Temperature 0oC - 45oC

Image sensor

Power Supply Adapter

color CMOS 0.3M Pixels

Input: 100-240V, 50/60Hz 150mA

Output 5VDC, 1000mA.

Rating

Parent Unit

2405 - 2475 MHz

Frequency

Operating Temperature 0oC - 45oC

Display

Battery Rating

Power Supply Adapter

Rating

2.8" diagonal TFT LCD

3.7V 1200mAh Li-ion battery pack

Input: 100-240V, 50/60Hz 150mA.

Output 5VDC, 1000mA

Specifications are subject to change without prior notice.

30

Technical Specifications

Manufactured, distributed or sold by Meizhou Guo Wei

Electronics Co. LTD., official licensee for this product.

MOTOROLA and the Stylized M Logo are trademarks or

registered trademarks of Motorola Trademark Holdings, LLC. and

are used under license. All other trademarks are the property of

their respective owners. © 2021 Motorola Mobility LLC.

All rights reserved.

Version 4 (EN_US)



 

 

 

 

 

 

 

 

 

 

.

n

o

s

a

e

r

n

o

i

t

a

t

i

m

i

l

e

c

a

f

r

e

t

n

i

d

n

a

e

c

a

f

r

u

s

o

t

e

u

d

l

a

u

n

a

m

n

i

d

e

t

s

i

l

s

a

w

t

n

e

m

e

t

a

t

s

e

c

n

a

i

l

p

m

o

c

:

k

r

a

m

e

R

.

i

n

o

i

t

a

n

m

a

l

t

t

a

m

h

t

i

w

l

e

b

a

l

e

t

i

h

W

:

l

a

i

r

e

t

a

M

m

m

0

3

H

x

4

3

W

:

e

z

S

i

s

e

i

l

p

p

u

S

r

e

w

o

P

d

n

a

s

e

i

r

e

t

t

a

B

y

n

o

e

s

U

l

i

.

e

d

u

g

s

’

r

e

s

u

e

h

t

n

i

d

e

t

s

i

l

.

h

A

m

0

0

2

1

,

.

V

7

3

k

c

a

p

y

r

e

t

t

a

B

n

o

i

-

i

L

A

m

0

0

0

1

V

5

C

D

:

T

U

P

N

I

U

P

3

8

4

M

V

:

L

E

D

O

M

I

A

N

H

C

N

I

E

D

A

M

U

P

3

8

4

M

V

-

B

R

R

A

2

:

D

I

C

C

F

U

P

3

8

4

M

V

-

3

5

3

0

2

:

C

I

U

P

3

8

4

M

V

:

I

N

V

H

x

x

x

x

x

x

W

W

Y

Y

C

C

G

G

F

F

F

l

e

b

a

L

g

n

i

t

a

R

t

i

n

U

t

n

e

r

a

P

&

x

o

b

t

f

i

g

n

o

r

e

b

m

u

N

l

a

i

r

e

S

x

x

x

x

x

x

W

W

Y

Y

C

C

G

G

F

F

F

.

l

s

r

e

t

t

e

l

k

c

a

b

d

n

u

o

r

g

k

c

a

b

e

t

i

h

W

l

:

r

u

o

o

C

)

1

.

)

x

o

b

t

f

i

G

(

m

m

0

1

x

0

3

i

:

e

z

S

)

2

i

)

s

t

i

g

d

3

(

e

d

o

c

y

r

o

t

c

a

f

-

F

F

F

k

e

e

W

e

r

u

t

c

a

f

u

n

a

M

-

W

W

8

2

1

e

d

o

c

:

t

a

m

r

o

F

e

d

o

C

-

r

e

b

m

u

n

s

e

i

r

e

S

-

x

x

x

x

x

x

r

a

e

Y

e

r

u

t

c

a

f

u

n

a

M

-

Y

Y

p

u

o

r

g

y

r

t

n

u

o

C

-

G

G

l

e

d

o

c

r

o

o

C

-

C

C

s

e

i

l

p

p

u

S

r

e

w

o

P

d

n

a

s

e

i

r

e

t

t

a

B

y

n

o

e

s

U

l

i

.

e

d

u

g

s

’

r

e

s

u

e

h

t

n

i

d

e

t

s

i

l

.

h

A

m

0

0

2

1

,

.

V

7

3

k

c

a

p

y

r

e

t

t

a

B

n

o

i

-

i

L

A

m

0

0

0

1

V

5

C

D

:

T

U

P

N

I

U

P

3

8

4

M

V

:

L

E

D

O

M

I

A

N

H

C

N

I

E

D

A

M

U

P

3

8

4

M

V

-

B

R

R

A

2

:

D

I

C

C

F

U

P

3

8

4

M

V

-

3

5

3

0

2

:

C

I

U

P

3

8

4

M

V

:

I

N

V

H

x

x

x

x

x

x

W

W

Y

Y

C

C

G

G

F

F

F

A

N

_

t

e

S

l

e

b

a

L

t

c

u

d

o

r

P

e

l

i

F

g

n

i

l

e

b

a

L

e

n

o

t

a

n

B

i

:

e

m

a

N

t

r

a

P

t

i

n

U

t

n

e

r

a

P

:

e

m

a

N

t

r

a

P



 

 

Meizhou Guo Wei Electronics Co., Ltd AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. Website: www.sgwglobal.com Date: 27 May, 2021 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2ARRB-VM483PU To whom it may concern:

We, the undersigned, hereby authorize SGS Hong Kong Limited and YW Yung in SGS Hong Kong Limited to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Meizhou Guo Wei Electronics Co., Ltd

. This authorization is valid until further written notice from the applicant. Name (Printed):Raymond Leung Signature:

Title: Engineering Manager On behalf of Company: Meizhou Guo Wei Electronics Co., Ltd Telephone: +86-755-25736666

 

 

Meizhou Guo Wei Electronics Co., Ltd

AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou,

Guangdong, China.

Website: www.sgwglobal.com

SGS North America Inc.

620 Old Peachtree Road

SUITE 100

Suwanee, Georgia

United States

To:

From: Meizhou Guo Wei Electronics Co., Ltd

AD1 Section, Economic Development Area,

Dongsheng Industrial District,

Meizhou,Guangdong, China.518000

Confidentiality Request regarding application for FCC ID 2ARRB-VM483PU

Regarding:

LONG TERM CONFIDENTIALITY

Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request

confidential treatment of the documents listed below, associated with the certification application referenced

above.

Schematic(s)

Block Diagrams

Operational Descriptions

The documents above contain proprietary information not released to the public. Public disclosure of this

information may prove harmful to the business of the applicant.

Sincerely,

Raymond Leung

Engineering Manager

Meizhou Guo Wei Electronics Co., Ltd



 

 

a)

b)

c)

d)

e)

f)

g)

SGS North America Inc.

620 Old Peachtree Road

SUITE 100

Suwanee, Georgia 30024

United States

Applicant Declaration

Applicant Legal Business Name

Meizhou Guo Wei Electronics Co., Ltd.

AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou,

Guangdong, China.

Address

Grantee Code

FCC ID

Contact Email

Contact Phone

Authorized Contact Name

Raymond Leung

2ARRB

2ARRB-VM483PU

raymond.leung@sgwglobal.com.cn

0755-2573 6666

I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my

knowledge and belief.

in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in

this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules,

if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure

that production units of this equipment will continue to comply with the FCC’s technical requirements.

in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible

party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321.

in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts

and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3)

the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS,

FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or

software required for evaluation, review, certification and audit surveillance of products certified by SGS.

neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section

5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See

47CFR 1.2002(b) for the definition of a “party” for these purposes.

the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions.

Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47

Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm

Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html

Applicant Signature:

Date: 2021-05-27

Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Raymond Leung

Engineering Manager

Applicant Declaration

Rev:0.0