FCC ID: 2ARRB-VM44PU Video Baby Monitor

USERS GUIDE 4.3 " Wi-Fi Video Baby Monitor MODELS: VM20 CONNECT, VM20-2 CONNECT, VM20-3 CONNECT, VM20-4 CONNECT The features described in this users guide are subject to modifications without prior notice. Welcome... to your new Motorola Wi-Fi Video Baby Monitor!

Thank you for purchasing the Wi-Fi Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room. Our Connected Baby Monitor let you see your baby from the hand-held viewer, or from your smartphone. Watch over and communicate with your baby from anywhere in the world. Please keep your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For questions, warranty, support or service related to the product, please contact us by visit:

motorolanursery.com/support This Users Guide has all the information you need to make the most out of your product. Please read the Safety Instructions on pages 8-9 before you install the unit. Inside the Box 1 x Parent Unit 1 x Baby Unit (Camera) 2 x Power adapter (Parent Unit and Baby Unit) 1 x Quick Start Quide In multi-camera packs, you will find one or more additional Camera Units with power adapters. 1 1 12 13 14 15 9. TALK button Press and hold to speak to your baby. 10. Mocrophone 11. Antenna 12. RESET button (recessed - use small pin) 13. Speaker 14. Power Socket 15. Stand Overview of the Parent Unit 10 9 1. Display (LCD screen) 2. Parent Unit ON/OFF and Charging LED Red when the parent unit is ON. Purple when electrical outlet connected. Blue when off and connected to electrical outlet. Audio Level LEDs (Green, Green, Amber, Red, Red) 4. MENU button Press to open / close the Menu options. VIDEO ON/OFF button Press to turn the LCD screen ON/OFF (Note:

audio is maintained.) Navigation button Move Up/Down/Right/Left menu options. Adjust Volume level and Brightness OK button Power button Press and Hold to turn the Parent Unit ON/OFF. 3. 5. 6. 7. 8. Parent Unit menu icons Signal Level (5 Levels) Night Vision Mode (Video also changes to Black/White). Talk Mode On. Indicates the screen off timer is set. Volume Level Control (8 Levels). No Baby Unit detected. Battery Level Indication (4 Levels). Zoom Level Control (1X, 2X). LCD Brightness Level Control (8 Levels). Lullaby Control (5 Song Selections). Alarm Setting (6h, 4h, 2h, OFF) On status bar, indicates alarm set, and when flashing, that alarm time has been reached or missed. Temperature scale select (C/F) Readings display in BLUE, but turn RED if > 29 C / 84 F or < 14 C / 57 F. Displays HH C / F if >36 C / 97 F. Displays LL C / F if < 1 C / 34 F. Camera Control (scan

, view

, add

, del

). Set Screen Off Timer (Off

, 5 mins, 30 mins, 60 mins). View multiple cameras on screen. Available when you have more than 1 Baby Unit (Camera). Home page of Hubbleconnect, Scan the QR code to download the Hubble Connected App on Smartphone or tablet. Overview of Your Baby Unit 1. 2. 3. 4. Infrared LEDs (x 8, for night vision) Photo Sensor (Night Vision Mode) Camera Lens Power/Link indicator 10 5. High Sense Microphone 6. Speaker 7. PAIR button 8. Power Socket 9. Antenna 10. Temperature Sensor Important guidelines for installing your Digital Video Baby Monitor To use your Baby Unit and Parent Unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic door or reinforced concrete, between the Baby Unit and Parent Unit may block the radio signal. The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches. Other 2.4GHz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, microwave ovens or other Baby Monitors, may cause interference with this product, so keep the Baby Monitor at least 5ft (1.5m) away from these types of product, or switch them off if they appear to be causing interference. If the signal is weak, try moving the Parent and/or the Baby Unit to different positions in the rooms. Table of contents 1. Safety Instructions ...................................................................................... 8 2. Getting Started .......................................................................................... 10 2.1 Connecting the Power Supply for the Baby Unit ........................................ 10 2.2 Connecting the Power Supply of the Parent Unit. .................................... 10 2.3 Desktop Stand of the Parent Unit .............................................................. 11 2.4 Registration (Pairing). ............................................................................... 12 3. Using the Baby Monitor ............................................................................ 13 3.1 Setting Up .................................................................................................. 13 3.2 Night Vision Mode ..................................................................................... 13 3.3 Talk Mode ................................................................................................... 13 3.5 Video ON/OFF ............................................................................................ 13 3.6 Temperature Display (HH C / F or LL C / F) ............................................ 14 4. Parent Unit Menu Options ........................................................................ 14 4.1 Volume ....................................................................................................... 14 4.2 Zoom .......................................................................................................... 14 4.3 Brightness .................................................................................................. 14 4.4 Audio Playlist ............................................................................................. 14 4.5 Alarm .......................................................................................................... 15 4.6 Camera Control ......................................................................................... 15 4.6.1 Add (pair) a camera ....................................................................... 15 4.6.2 View a camera ................................................................................ 16 4.6.3 Delete a camera ............................................................................. 16 4.6.4 Scan camera ................................................................................... 17 4.7 Temperature ............................................................................................. 17 4.8 Power Saving mode. .................................................................................. 18 4.9 View multiple cameras on screen ............................................................. 18 5. Wi-Fi Internet Viewing ............................................................................ 19 6. Camera Functions ...................................................................................... 24 7. Working with PC/Notebook ........................................................................ 26 6 Table of contents 8. 9. Procedure for Resettingthe Camera ............................................................. 26 Disposal of the Device (environment)........................................................ 27 10. Cleaning ........................................................................................................27 11. Help ..............................................................................................................28 12. General Information ............................................................................... 36 13. Technical Specifications .......................................................................... 42 H S I L G N E 7 1. Safety Instructions WARNING:

Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. 8 Safety Instructions Wi-Fi CAMERA UNIT SET UP & USE:

Choose a location for the Baby Unit that will provide the best view of your baby in his/her crib. Place the Baby Unit on a flat surface, such as a dresser, bureau or shelf, or mount the Baby Unit on a wall securely using the keyhole slots in the underside of the stand. NEVER place the Baby Unit or cords within the crib. H S I L G N E WARNING This Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as de- scribed in the Users Guide, safe to use. Therefore, always read the instructions in this Users Guide carefully before using the device. Adult assembly is required. Keep small parts away from children when assembling. This product is not a toy. Do not allow children to play with it. This Baby Monitor is not a substitute for responsible adult supervision. Keep this Users Guide for future reference. Keep the cords out of reach of children. Do not cover the Baby Monitor with a towel or blanket. Test this monitor and all its functions so that you are familiar with it prior to actual use. Do not use the Baby Monitor in damp areas or close to water. Do not install the Baby Monitor in extreme cold or heat, direct sunlight, or close to a heat source. Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. Do not touch the plug contacts with sharp or metal objects. Connect the power adapters to easily accessible electrical sockets. CAUTION There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to their instructions. Use only the rechargeable battery pack with rating: 3.8V 2000mAh. Safety Instructions 9 2. Getting Started 2.1 Connecting the Power Supply for the Baby Unit Insert the DC plug of the power adapter into the DC socket on the back of the Baby Unit. Connect the other end of the power adapter to a suitable electrical outlet. The baby unit turns on and the power indicator lights in Blue colour. Note Only use the supplied power adapter (DC5V/1000mA). 2.2. Connecting the Power Supply of the Parent Unit. A rechargeable battery (Lithium ion battery 2000mAh) inside the Parent Unit allows you to move it without losing the link and picture from the Baby Unit. We recommend charging the for at least 16 hours before first use, and when the Parent Unit indicates the battery is low. 10 Getting Started Connect the small plug of the power adapter to the parent unit and the other end to the electrical outlet. Only use the enclosed adapter

(5VDC/1000mA). Press and hold the button to turn the Parent unit on, the Parent unit and Baby unit are automatically linked and ready to use. H S I L G N E NOTE:

When the Baby and Parent Units are both turned on and within range, the Parent Unit should show a color image from the Baby Unit camera, but if the room is icon showing, due to the dark, the image will be in black and white, with an infra-red illumination by the Baby Unit. 2.3. Desktop Stand of the Parent Unit The parent unit comes with a desktop stand attached to the back of the parent unit. To place the parent unit on a desk, simply pull out the stand as shown. NOTE Place the parent unit on a flat, even surface. Getting Started 1 1 Registration (Pairing) 2.4 The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below:

1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until scan menu will pop up. is highlighted, and the view/

add/

del/

3. Press the + UP button or - DOWN button to select add, and press the O button to confirm.

4. Camera will pop up. Press the + UP button or

- DOWN button to select the desired Camera, and press the O button to start searching for a camera unit. Note: If a camera is currently paired with the Parent Unit, its camera location

(with a * against it) cannot be selected for a new registration. 5. Press and hold the PAIR button on the back of the Baby Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear. NOTE A camera can only be registered to one Parent Unit at any one time. 12 Getting Started Setting Up 3. Using the Baby Monitor 3.1 Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the angle of the Baby Unit's camera until you are satisfied with the image shown on the Parent Unit. H S I L G N E NOTE Do not place the Baby Unit within the baby's reach! If there is inter- ference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment. 3.2 The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the top of the Unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and Night Vision Mode white. The icon will be displayed at the top of the screen. Talk Mode 3.3 Press and hold the TALK button T on the Parent Unit to talk to your baby through the Baby Units loudspeaker. The T icon will be displayed at the top of the LCD screen. Video ON/OFF 3.4 Press V VIDEO On/Off button to turn the LCD screen on or off, whilst still leaving the audio monitor on. Temperature Display (HH C / F or LL C / F) 3.5 The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen. The readings will turn RED if the temperature goes above 29C / 84F or below 14C / 57F. The reading will change to HH C / F if the temperature goes above 36C / 97F. The reading will change to LL C / F if the temperature goes below 1C / 34F. Using the Baby Monitor 13 4. Parent Unit Menu Options 4.1 Press the Left or Right button to adjust the volume level. The

(The default volume level setting is level 5, and level 0 is OFF.) Volume icon will pop up and you can select the desired volume from level 0~8. Zoom 4.2 1. Press the M button and the menu bar will pop up with highlighted. Press the + UP button or - DOWN button to select 1X or 2X 2. zoom. (The default setting is 1X.) 4.3 Brightness 4.4 Audio Playlist Press the + UP button or - DOWN button to select the desired brightness from level 1 ~ 8. (The default brightness is level 4.) You can playback audio content - Lullabies, Soothing Sounds and Audio Book

(English only) on the Baby Unit. The audio content can be downloaded and stored in the Baby Unit via Hubble App. You have 10 preloaded lullabies/soothing sounds and 10 audio books in the Baby Unit. Lullaby/Soothing Sounds Playback 4.4.1 Tap on M button then Scroll Left/Right to select Scroll Up or Down to select Press + UP button or - DOWN button to view the desired then confirm with O button. Lullaby/Soothing Sounds. The song names appear on the screen. Press O button to play the selection. option at the menu bar. 14 Parent Unit Menu Options option at H S I L G N E 4.4.2 Audio Book (English only) Playback Tap on M button then Scroll Left/Right to select the menu bar. Scroll Up or Down to select Press + UP button or - DOWN button to view the desired Audio Book. The then confirm with O button. book titles appear on the screen. Press O button to play the selection. Stop Playback 4.4.3 Tap on M button then Scroll Left/Right to select Scroll Up or Down to select or then confirm with O option at the menu bar. button. Press + UP button or - DOWN button until "Press OK to stop playing"

appears on screen then confirm with O button to stop. Press M button to exit. Alarm 4.5 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted. 3. Press the + UP button or - DOWN button to select the alarm time (6h, 4h, 2h). (The default setting is Alarm OFF.) 4. If an alarm time is selected, the Parent Unit will beep for about 45 seconds after every 6, 4 or 2 hour period. Camera Control Add (pair) a camera 4.6 4.6.1 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until scan menu will pop up. view/

add/

del/

is highlighted, and the 3. Press the + UP button or - DOWN button to select add, and press the O button to confirm. 4. Camera

will pop up. Press the + UP button or Parent Unit Menu Options 15

- DOWN button to select the desired Camera, and press the O button to start searching for a camera unit. Note: If a camera is currently paired with the Parent Unit, its camera location

(with a * against it) cannot be selected for a new registration. 5. Press and hold the PAIR button on the underside of the Baby Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear. NOTE A camera can only be registered to one Parent Unit at any one time. 4.6.2 View a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until the del/

add/

view/

scan menu will pop up. is highlighted, and 3. Press the + UP button or - DOWN button to select add, and press the O button to confirm.

4. Camera will pop up. Press the + UP button or

- DOWN button to select the desired Camera, and press the O button to view the picture from that camera. Note:

Only camera locations with a * can be selected. TIP You can also press the OK button repeatedly to select the avail-able camera options from 4.6.3

Delete a camera scan.

, 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and the del/

add/

view/ pop up. scan menu will 16 Parent Unit Menu Options 3. Press the + UP button or - DOWN button to select del, and press the O button to confirm. 4. Camera

will pop up, press the + UP button or

- DOWN button to select the desired Camera, and press the O button. 5. Press the + UP button or - DOWN button to select press the

, then O button to delete that registration. H S I L G N E NOTE You are not allowed to delete the camera if there is only one registered camera in the system. Scan camera 4.6.4 This function is only available when you have more than 1 Baby Unit

(Camera). 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and the del/

add/

view/ pop up. scan menu will 3. Press the + UP button or - DOWN button to select scan, and press the O button to confirm. 4. The screen will then display images from different registered cameras in a loop of Camera 12 seconds.

every

, changing about TIP:

You can also press the O button repeatedly to select the avail- able camera options from scan.

, 4.7 1. 2. Temperature Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until highlighted. is 3. Press O, then +UP / -DOWN to select C or F. Parent Unit Menu Options 17 4.8 Power Saving mode 1. 2. 3. Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until V is highlighted. Press the + UP button or - DOWN button to select auto video off after 5 mins, 30 mins or 60 mins (if operating on batteries only). NOTE The audio will remain and you can press any key to switch the video back on. View multiple cameras on screen 4.9 This function is only available when you have more than 1 Baby Unit

(Camera). When the Split Screen function is On, you can view multiple cameras on the screen. 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is 3. Press+ UP button or - DOWN button to select Split Screen On highlighted.

/ Off

. 4. When the Split Screen function is On, you can press the < LEFT button/ >

RIGHT button/ + UP button/ - DOWN button to switch between cameras to hear the audio from the selected camera. 18 Parent Unit Menu Options H S I L G N E 5. Wi-Fi Internet Viewing Minimum System Requirements 5.1 Android System Version 5.0 or above iPhone/iPad iOS Version 9.0 or above High Speed (Wi-Fi) Internet At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site: http://www.speedtest.net) 5.2 Getting started - Connecting Devices How does it work?

Wi-Fi Camera Wi-Fi Router Access your Camera locally View your Camera from any compatible device remotely Hubble Service When a user tries to access the Camera, our Hubble server authenticates the users identity and permits access to the Camera. Setup 5.3 Connect the Wi-Fi Camera to the Power Adapter, then plug into mains power. The Camera must be within range of the Wi-Fi router with which you want to connect. Make sure the password of the router is available for entering during the in-app setup process. Wi-Fi Internet Viewing 19 Status of LED Indication:

Note: You can only setup via a compatible smartphone or tablet and not via a PC. LED is Blue and Flashing. LED is Red and Flashing. LED is Blue and always on. LED is Blue and Flashing. Pair / Setup state:

Unconnected state:

Connected state:

Video streaming:

User Account and Camera Setup on Compatible Devices What you 5.4 need Wi-Fi Camera Unit Power adapter for the Camera Device with Android or iOS system 5.4.1 Switch the parent unit off before connect the camera to Wi-Fi. Connect the power adapter to mains power and insert the plug Power ON and Connect the Camera into the power socket on the back of the Camera Unit, the unit turns on. 5.4.2 Download Hubble Connected App Scan the QR code with your smart device and download Hubble Connected App from the App Store for iOS devices or from the Google Play Store for Android devices. Install Hubble Connected App on your device. 5.4.3 Sign up with Hubble on your smart device Ensure that your smart device is connected to your Wi-Fi router. Run Hubble Connected App, tap Sign Up with Hubble (fig. A1), read through the Privacy Policy, Terms and Conditions, by signing up you agree to our terms of service before tap Done (fig. A2), enter your account information to sign up with Hubble. Note:

If you already have a Hubble App account, please tap Log in with Hubble to go to the next steps. 20 Wi-Fi Internet Viewing H S I L G N E A1 A2 5.4.4 Add the Camera to your account Log in your Hubble Account by entering "User Name" and "Password"

(fig. A3). Tap on the screen of your device to add new Camera (fig. A4) A3 A4 Wi-Fi Internet Viewing 21 To select your device for setting up by tapping Baby Monitoring (fig. A5). Tap EASE44CONNECT to add the new camera (fig. A6) . A5 A6 The following setup instructions will appear on the screen, select your Wi-Fi network and enter "Password" (fig. A7). Power on your camera and wait for the Blue LED flashing on the camera (fig. A8) A7 A8 22 Wi-Fi Internet Viewing Press and hold the PAIR button at the side of Camera, you will hear a voice prompt

"Ready for Pairing" then tap Continue (fig. A9) Tap Generate QR code on your device and hold the QR code 15 to 30 cm in front of Camera to get scanned till you will hear confirmation message " Scanning Sucess"

from your device.(fig. A10) H S I L G N E A9 A10 It will take a few minutes for the Camera to connect to the Wi-Fi network before showing the connection status (fig. A11). The Camera has been successfully connected, name your Camera (fig. A12). A11 Wi-Fi Internet Viewing A12 23 6. Camera Functions 6.1 Connect the power adapter to mains power and insert the plug into the power Connecting the Camera Unit to power socket on the back of the Camera Unit. The Blue LED will illuminate after approximately 30 seconds if the camera is set up. The Red LED will flash if the camera is not set up. (Note: To switch off the device, unplug the power supply.) Run the Hubble for Motorola Monitors App on your smart device. 6.2 Overview of the Features on Hubble App Event History Tap Event History to access the video record list that is triggered by Motion or Sound detection. Delete Events Tap to delete selected event(s). Photo/Video Take a photo or record a video from your Camera. Tap the Video icon to activate Video function. Tap and hold the red button to start recording and release to stop. Tap the Camera icon to switch to Camera mode. You can capture photos from Camera view. Note:

Photos and videos will be stored in the internal flash memory of your smart de- vice, and can be accessed via the Gallery or Media Player (Android Device). To play videos, please use the Hubble App. 24 Camera Functions Lullabies Tap to access the Melody menu and select one of the 10 pre-set melodies you wish to play on your Camera Unit. Tap to access the Soothing sounds/Audio books or Personal recordings. H S I L G N E Talkback Tap to activate the function. Press the once to speak through the round button Camera Unit. Toggle the button again to listen to the audio feedback from the Camera Unit. Tap to toggle speaker on or off. You can change the Camera settings by tapping on the Settings icon. Speaker Setting Add Camera Enter Add Camera procedures. Camera Functions 25 7. Working with PC/Notebook Go to http://www.hubbleconnected.com/motorola/login/

Enter your User Name and Password and then click Login if you have already created an account. Click on the Camera list paired in your account via Android device or iPhone/iPad and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming. On the website, you can change the Settings by following the Menu 8. Procedure for Resetting the instructions. Camera Note: If your Camera is moved from one router (e.g. home) to another (e.g. office) or you have Camera setup issues, then the Camera must be reset. Please reset the Camera with the following procedures:

Press and hold the PAIR button approximately 20 seconds, you will hear a long beep thence release PAIR button, wait for the Camera Unit to complete an internal reset procedure.The Red LED will begin to flash when the Camera Unit is reset successfully. You can add your Camera again by following the steps in section 5.4.3 for Android devices or in section 5.5.3 for iOS devices. 26 Working with PC/Notebook 9. Disposal of the Device (environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, users guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment. H S I L G N E Please contact your local authorities in case you need more information on the collection points in your area. The internal battery should be disposed of with the Parent unit in an environmentally-friendly manner according to your local regulations. 10. Cleaning Clean the Baby Monitor with a slightly damp cloth or with an anti- static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care Do not clean any part of the product with thinners or other solvents and chemicals this may cause permanent damage to the product which is not covered by the warranty. Keep the Baby Monitor away from hot, humid areas or strong sunlight, and dont let it get wet. Every effort has been made to ensure high standards of reliability for your Baby Monitor. However, if something does go wrong, please do not try to repair it yourself contact Customer Service for assistance. IMPORTANT Always switch off and disconnect the power adapter before cleaning your baby monitor. Disposal of the Device (environment) 27 11. Help Display Try recharging the battery pack. Reset the Units. Unplug both the Units' electrical power, then plug them back in. Is the Unit switched on?

Press and hold the ON/OFF button 0 on the Parent Unit for 3 seconds to Is the correct camera selected? Change the camera number, if necessary. Is the video display turned on? Press the VIDEO ON/OFF button switch it ON. V to turn it ON. When operating using batteries only, the display will go blank after 5 minutes or 30 minutes or 60 minutes to save power (depending on video settings). The Unit is still active and will give you audio alerts. You can reactivate the screen by pressing any button. Registration If the Baby Unit has lost its link with the Parent Unit If the Baby Unit is too far away it may be going out of range, so move the Baby Unit closer to the Parent Unit. Reset both the Parent Unit and Baby Unit by disconnecting them from the electrical power. Wait about 15 seconds before reconnecting. Allow up to one minute for the Baby Unit and the Parent Unit to synchronize. See 2.3 Registration (Pairing), if there is a need to re-register the Units. Interference Noise interference on your Parent Unit Your Baby and Parent Units may be too close. Move them further apart. Make sure there is at least 1 to 2m between the 2 Units to avoid audio lf the Baby Unit is too far away, it may be out of range. Move the Baby Unit feedback. closer to the Parent Unit. 28 Help Make sure that the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/ mobile telephone. Move the Baby Unit or Parent Unit 1.5 metre away from other electrical equipment. Use of other 2.4 GHz products, such as wireless networks (Wi- Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product. Keep the Baby Unit or Parent Unit at least 1.5 metre away from these types of products, or switch them off if they appear to be causing interference. If the signal is weak, try moving the Parent and/or Baby Unit to different H S I L G N E positions in the rooms. Noise interference on your device To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi Camera Unit. Use of other 2.4 GHz products, such as Bluetooth systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi Camera Unit at least 1.5 metre away from these types of products, or switch them off if they appear to be causing interference. Lost connection Check your Wi-Fi settings. If necessary, reconnect your Wi-Fi. Ensure that the Wi-Fi Camera Unit is switched ON. Wait a few minutes to make the connection with the Wi-Fi system. If you forgot your password If you do not remember your password, tap Forgot Password and submit your e-

mail address. A new password will be sent to your e-mail address immediately. Help 29 Troubleshooting for Wi-Fi Internet Viewing Category Problem Solution Description / Error Account I am unable to login even after registra- tion. Please check your user name and password. Account Account Account Connectivi- ty Issues I receive an error message saying: Email ID is not registered. Please ensure that you have registered with us. Tap Create Account to create an account. What do I do if I forgot my pass-

word?

Click on the Forgot Password link on https://app.hubblecon- nected.com/

#lostpassword OR on your Android or iOS appli- cation. An email will be sent to your registered email address. I am unable to receive a new password although I have used the Forgot password option. I get a message: We are having problems access- ing your camera. This could be due to lack of internet connection. Please wait and try again later. 1. 2. 1. 2. 3. The e-mail might have been sent to your Junk Mail Fold- er. Please check your Junk Mail Folder. There might be a delay in getting your e-mail. Please wait a few minutes and refresh your email account. Please try again in a few minutes.This could be be- cause of any issue with your internet connection. If the problem remains, please restart your Camera to check if this fixes the problem. Please restart your Wireless Router. 30 Help Viewing Camera When I am in re- mote mode, the video stops after 5 minutes. How do I view for longer?

H S I L G N E When you are accessing your Camera via a network different from your home network (over the internet) your video times out after 5 minutes. You can click on the Camera again from the Android/iOS ap-

plication to start streaming again. If you are accessing from your webbrowser, then you can press on the Reload button to start viewing your Camera video stream again. Features The sound alert setting threshold is not right. You can Adjust Sound Sensitivi- ty to trigger notifications under Camera Setting menu. Setting Up While I am adding a new Camera to my account, I am not able to find any Cameras to add. General What are the supported browsers for accessing from my PC/ Mac?

If you are trying to add a Camera which has previously been added into your account or another account, you will first have to reset the Camera. This can be done by following the re-setting procedure stated in section 6 of this guide. Switch the parent unit off before connecting the camera to Wi-Fi. We recommend using Google Chrome 24 or above. However the following browsers are also supported: Internet Explorer 9.0 or above (for PC), Safari 6.0 or above (for Mac) or Firefox 18.0 or above (both PC or Mac). Help 31 General What is the significance of the camera LED?

Connectivi- ty issues I am not able to access my Camera. Setting Up During setup on de-

vices for Android and iOS, I am not able to find my Camera during the last step and the setup fails. The LED indicates the following status:

LED flashing Red: Your Camera is booting up. After a voice prompt the camera is booted up and ready for pairing. LED Cycling Blue/Red: Your camera is in pairing mode. LED Solid Blue: The camera is paired and set up to your account. LED Flashing Blue: The camera is live streaming. LED Off - No Power to camera. Please check if the Camera is within Wi-Fi range. Please try to move the Camera closer to the router for better Wi-Fi connectivity and try again. Please reset the Camera to setup mode and try again. Press and hold the PAIR button on the side of the camera until you hear a beep and voice prompt Ready for pairing. When the Camera LED is off, this indicates that it is in setup mode. Now restart the setup from your smartphone again. 32 Help Connec- tivity Issues Camera General Even though I am accessing my Camera from the same Wi-Fi network, I still find my Camera is shown as remote. I can only access it for 5 minutes at a time. When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do?

Which platforms are supported for accessing my Camera?

Please check your wireless router settings. For example, for Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. H S I L G N E Please upgrade your firmware. This takes around 5 minutes. We push upgrades from time to time to improve the Camera features. Minimum requirement: Windows 7*

*Java browser plug-in needed Mac OS version 10.7 Chrome version 24 Internet Explorer version 9 Safari version 6 Java version 7 Firefox version 18.0 Adobe Flash Player 15.0 Android 5.0 iPhone/iPad iOS version 9.0 General I do not hear any sound when I am accessing a remote Camera. You can tap on the speaker icon in the video stream screen to hear audio. By default the audio is not ON when you are accessing a remote Camera. Help 33 General What is the mean- ing of Local Cam- era and Remote Camera?

General How do I down- load the App for Android and iOS devices?

Setting up When the video is cut off, the appli- cation attempts to reconnect and this results in lost sound and choppy video. When you are accessing your Camera from the same wireless network

(Home) in which it is configured, it is a Local Camera. When you are accessing your Camera away from your home it is a Remote Camera. You may be using 3G, 4G or 4G LTE or a Wi-Fi connection outside of your home. Android:

Open the Google Play Store on your Android device. Select Search Type in Hubble for Motorola The results will show the Hub- ble Monitors App Select to install it iOS Device:

Open the App StoreTM Select Search Type in Hubble for Motorola The results will show the Hub- ble Monitors App Select to install it You will need to turn off the Auto Lock function of your device to ensure continuous video/audio streaming. 34 Help Features How many users can access the Camera at one time?

If you are accessing in Local Mode, two users are supported, after two users all streaming will go through the remote server. This allows for unlimited user access to a single Camera at one time. H S I L G N E Connectivi- ty issues found I interference caused by my other webcam devices. Video streaming performance is related to internet bandwidth, especially if you have 2 or more video streaming devices that are working through the same router. Help 35 12. General Information If your product is not working properly... 1. Read this User's Guide or the Quick Start Guide. 2. Visit us at: motorolanursery.com/support H S I L G N E To order a replacement battery pack for parent Unit, contact customer service. Consumer Products and Accessories Limited Warranty

("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Meizhou Guo Wei Electronics CO., Ltd. ("MZGW") What Does this Warranty Cover?

Subject to the exclusions contained below, MZGW warrants that this Motorola branded product ("Product") or certified accessory ("Accessory") sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your exclusive warranty and is not transferable. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE. Who is covered?

This Warranty extends only to the first consumer purchaser, and is not General Information 37 transferable. What will MZGW do?

MZGW or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts. What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR MZGW BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another. 38 General Information Products Covered Consumer Products Consumer Accessories Consumer Products and Accessories that are Repaired or Replaced H S I L G N E Length of Coverage Two (2) years from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and/or batteries that leak are covered by this Warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or MZGW, are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. General Information 39 Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, MZGW or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information?

To obtain service or information, please contact us by visit:

motorolanursery.com/support You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a MZGW Authorized Repair Center. To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a Warranty card was included in your box, a completed Warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number. These terms and conditions constitute the complete warranty agreement between you and MZGW regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by MZGW or representations made by any agent, employee or staff of MZGW, that may have been made in connection with the said purchase. 40 General Information H S I L G N E FCC and IC regulations FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. General Information 41 ISEDC Warning This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d' Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Radiation Exposure Statement:

The baby unit complies with FCC/ISEDC radiation exposure limits set forth for an uncontrolled environment. The baby unit should be installed and operated with minimum distance 20cm between the radiator& your body. The parent unit has been tested and comply with FCC and ISEDC SAR limits. Dclaration d'exposition aux radiations:

L'unit bb est conforme aux limites d'exposition aux rayonnements FCC / ISEDC tablies pour un environnement non contrl. L'unit bb doit tre installe et utilise avec une distance minimale de 20 cm entre le radiateur et votre corps. L'unit parent a t teste et est conforme aux limites SAR FCC et ISEDC. 42 General Information 13. Technical Specifications BABY UNIT 2400 MHz to 2483.5 MHz color CMOS 1M Pixels Frequency Image sensor Operating Temperature 0oC - 45oC IR LED 6 pcs Power Adapter H S I L G N E Dongguan Becky Electronics Tech Co., Ltd.

(BQ05A-0501000-U) Input 100-240V AC, 50/60Hz, 300mA;

Output: 5.0V DC, 1000mA or Shenzhen YWK Electronic Co., Ltd.

(YWK-AD050100-U) Input: 100-240V AC, 50/60Hz, 300mA;

Output: 5.0V DC, 1000mA WARNING Use only with supplied power supply. Technical Specifications 43 2400 MHz to 2483.5 MHz 4.3" diagonal TFT LCD 16.7M color LCD PARENT UNIT Frequency Display Display Colors Operating Temperature 0oC - 45oC Brightness Control 8 steps Volume Control Power Adapter 8 steps + Off Dongguan Becky Electronics Tech Co., Ltd.

(BQ05A-0501000-U) Input 100-240V AC, 50/60Hz, 300mA;

Output: 5.0V DC, 1000mA or Shenzhen YWK Electronic Co., Ltd.

(YWK-AD050100-U) Input: 100-240V AC, 50/60Hz, 300mA; Out-

put: 5.0V DC, 1000mA WARNING Use only with provided power supply. Lenovo Corporation (BL253) 3.8V, 2000mAh Lithium-Ion Polymer, re-

chargeable battery pack WARNING Do not attempt to replace the battery, but contact Customer Service if it needs replacing. Battery (built-in) 44 Technical Specifications Manufactured, distributed or sold by MZGW Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-

Fi is a trademark of the Wi-Fi Alliance. All other trademarks are the property of their respective owners. 2021 Motorola Mobility LLC. All rights reserved. US_EN Version 2 Printed in China

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210218-04521E-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. Tel: +86-755-25736666, Fax: +86-755-25732288, Website: www.sgwglobal.com

15-March-2021 To whom it may concern , Multiple Models Confirmation Letter I, the undersigned, hereby confirm that the family models are listed in the following table. These models are identical as follows: :

Electronics/electrical designs, including firmware

, Construction design/Physical design/Enclosure PCB layout PCB

(Others, please specify ,) The only differences between these models are the follows for marketing purpose: :

Color Software Cosmetic details Trade name Model Number

(Others, please specify ,) different LCD lens color Suffix (

) represents

) Color code Packing configuration

(Others, please specify ,) Item No. New model Model Number Remark 1 2 YES YES VM44 CONNECTPU VM20 CONNECTPU FCC ID: 2ARRB-VM44PU IC: 20353-VM44PU The sample being submitted to Bay Area Compliance Laboratories Corp. (Shenzhen) for conformity assessment is item no. / model number VM20 CONNECTPU (tested model) of the above list. Regards , Raymond Leung Engineering Manager Ver. 1 15_Fbe_2011

Meizhou Guo Wei Electronics Co., Ltd ADD: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. Tel: 0755-2573 6666 Email: raymond.leung@sgwglobal.com.cn FCC Confidential Authorization Date: 2021-05-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:

2ARRB-VM44PU In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Meizhou Guo Wei Electronics Co., Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Raymond Leung Engineering Manager