GETTING STARTED with TAP TAP
How to TURN ON Tolk 1) 2) 3) Please ensure you have charged Tolk at least 1 hour before first use Please long press the on/off button, until the red light on After a minute later you will see the green light on, and you will hear current [battery capacity] and the factorys original language set-up [source and target language]
4) Now Tolk is ready to use How to USE Tolk Source/Primary Language:
1) Just press/ tap once and you will see the green light change to blue light, and then you can speak your source/primary language. Once finished talk the blue light will change to green and start to translate it into the target language. Target Language:
2) Just press/ tap once and you will see the green light change to purple light, and then other person can speak their target language. Once finished talk the purple light will change to green and start to translate it into the source language. How to CHANGE target/primary and source language Source/Primary Language:
1) Just long press the source language button until you see the white light on, and let go the button. When you hear the [beep] sound, now you can speak the source language to change the country or language you want to. You will hear Tolk to confirm the source/primary language has changed as your request. Target Language:
2) Just long press the target language button until you see the white light on, and let go the button. When you hear the [beep] sound, now you can speak the source language to change the country or language you want to. You will hear Tolk to confirm the target language has changed as your request. How does REPEAT (self-checking)/RESET button works Repeat button: this is also a self-checking button Just tap once the repeat button, and then you will hear the last translated sentence. Few seconds later, the last translated sentence will re-translate again into primary or target language. This function helps a use to double check the translation is well translated into other languages and well-interpret its original meanings. Reset button: when you want to reset the Tolk to its original factory setting primary and target language Just long press the red button about 5 seconds later, you will see the light off and change to green. Tolk will report the current battery capacity and original factory
[primary/target] language setting. This means Tolk has reset successfully. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Charging Hole Microphone Reset / Replay Button Volume Control(+ -) On/off Button LED Light
(Red&Green&Blue) Target Language Button Primary Language Button Speaker FCC ID: 2ASMFQF200