Users Manual Menix Co., Ltd. Information to the user This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, with can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Menix Co., Ltd. for compliance could void the user's authority to operate the equipment. Warning 1 Thank you for purchasing our CyberEye-Cam. For the best results, please review this manual first. These operating instructions should be retained for future reference. CONTENTS FEATURES COMPONENTS NAME OF PARTS CAMERA RANGE AND ANGLE HOW TO USE REMOTE CONTROLLER SETUP MODE
- MODE TO DELETE/KEEP THE SAVED IMAGES
- MODE TO CHANGE DATES AND TIME
- MODE TO SETUP RECORDING INTERVAL
- MODE TO SETUP NUMBERS OF TAKING PICTURES HOW TO OPERATE HOW TO CHECK THE SAVED IMAGES SPECIFICATIONS WARRANTY 2 FEATURE It will takes the images of criminals and saves them in Built-in Memory, and these images with time-stamp can be used to verify the criminals and used as an evidence to the court of law.
(1) Auto-detecting feature in case of break-in to the car
(2) Emergency Image Capture ( In case of Taxi Robbery)
(3) Images will be saved in Built-in Memory (Max. 42 images)
(4) Time Stamp in the image (year/month/date/hour/min)
(5) Can takes pictures in the night (Using IR LED)
(6) Can adjust the Time interval between pictures (1~8 Seconds)
(7) Foot Switch is provided (Emergency Use) 3 COMPONENTS
(1) Remote Control (2) Main Body
(3) Camera (4) Power Adaptor (12V)
(5) Video Connection cord NAME OF PARTS
(1) Camera (2) Camera Jack(+)
(3) Camera Jack (-) (4) Video Connector 4
(5) Switch (6) Power Jack
(7) Remote control CAMERA RANGE AND ANGLE Horizontal Range : 51 Vertical Range : 41 5 HOW TO USE REMOTE CONTROLLER This device controls the Main body with radio-wave. When you press any button on the remote controller, the Red lamp will blink once and it will send 311.06Mhz AM radio wave and it will operate the main body.
(1) ARMED - Use to Arm(Activate) the main body. Increase the time, number
(2) OFF - Use to Off(Deactivate) the main body. Decrease the time, number
(3) EMERGENCY - Takes the image in urgent situation Move to next step when adjusting time, number How to replace the Battery (Alkaline A23) SETUP MODE 2 00 0. 7. 7. 14 :0 3 6 1. Connect Power Adaptor to the Power Outlet (DC 12V). 2. Connect to Power connecting jack by the side of main unit, please make sure to set switch to ON. (See the diagram) 3. Within 5 seconds after setting switch to ON, press the ARMED button on the remote control. As you hear beeping sounds, this means that the code will automatically be transferred into the system. 4. By pressing the OFF button, it makes a beep sound to confirm unit is off. 7 MODE TO DELETE/KEEP THE SAVED IMAGES This mode is for deleting or keeping all saved images.
(The cursor of initial screen is placed under the punctuation of Exit.) Armed button (DEL) : Delete all the Images.
(All Saved images will be deleted and SETUP MODE changes to normal mode You will see blue or black screen.) OFF button(Exit) : Go back to the normal mode
(The saved images will be still kept, then SETUP MODE changes to normal mode You will see blue or black screen) Emergency button : Move forward to next mode
(Still keeping the saved images, it transfers to the Mode for Changing Date and Time.)
! Cautions : Beware you will erase all images by pressing the ARMED button. Erased images cannot be recovered and they will be totally deleted from the system. 8 MODE TO CHANGING DATE AND TIME When this product is delivered to retail store, it is set for GMT plus 8 hours. Please adjust the time accordingly by using remote control. To do this, follow these instructions. ARMED button (!) : To increase the Number OFF button ("): To decrease the Number EMERGENCY button (#) : To move Cursor
* How to change date and time
(Example) 2001/01/31/12:00 to 2002/02/30/10:01 1/31/12:00 2001/01/31/12:01 2001/01/31/10:01 2001/01/30/10:01 2001/02/30/10:01 2002/02/30/10:01 To change Minute, press ARMED button one time., And then press EMERGENCY button for Mode To Change hour To change Hour, press OFF button 2 times. And then press EMERGENCY button for Mode to change date.. To change Date, press OFF button One time. And then press EMERGENCY button for Mode to change Month. To change Month, press ARMED button one time. And then press EMERGENCY button for Mode to change Year. To change Year, press ARMED button one All set up done time. Caution : The date and time may appear as 2000/01/01/12:00 in case of long time 9 power failure. Then please reset the date and time as per instructions above. When the time setup is done, please press EMERGENCY button to go to Mode to set up for Recording Interval. 10 MODE TO SET UP FOR RECORDING INTERVAL This mode is to set up for the recording intervals when an intruder is sensed or emergency switch is pressed. (For example, If you set the recording interval for 4 seconds, it will record a picture every 4 seconds when something is sensed. The system allows you to adjust and set a time interval of 1 ~ 8 seconds.) HOW TO ADJUST THE RECORDING INTERVAL One second is added by pressing ARMED button and one second will be reduced by pressing OFF button. REC Interval : 04
(It is set to 4 seconds when delivered)
(EX) : To set to 3 seconds for recording interval, press OFF button one time. REC Interval : 03
(EX) : To set to 6 seconds for recording interval, press ARMED button three times. REC Interval : 06 After all set up is done, press EMERGENCY button to go to the Mode to set up for the number of taking picture. 11 MODE TO SET UP FOR THE NUMBER OF TAKING PICTURE This mode is to set up for the number of picture taking when the Emergency button (or Foot Switch) is pressed one time. (For example, If you set up to 3, it will take 3 pictures and stop. The System allows you to adjust the number of pictures you require. REC Picture : 03 It is set to 3 pictures when delivered.
(Ex) To set up 2 picture, press OFF button one time. REC Picture : 02
( Set up is done)
(Ex) To set up 4 picture, press Armed button two times. REC Picture : 04
(Set up is done) Now all set up is done. Press EMERGENCY button or Press ARMED and OFF button on remote control at the same time, and it will goes back to normal mode. 12 HOW TO OPERATE Armed Button (TO ARM THE CAMERA) Press ARMED button on remote control. It will activate(be armed) after 16 seconds from hearing beeping sounds. Now it will sense any movement near the vehicle and record the images. OFF Button (TO DISARM THE CAMERA) Press OFF button on remote control. It will deactivate(be disarmed) with hearing a beep sound. EMERGENCY Button & FOOT SWITCH If you press the Emergency button on the remote control(or Press the Foot Switch) once , the camera will take 1~8 (depends on your initial setup) pictures on every 1~8 (depends on your initial setup) seconds. 13 TO CHECK THE SAVED IMAGES 2 00 0. 7. 7. 14 :0 3 Connect Video Connection cord to Main body and Video input jack on TV or nitor. Connect Power adaptor to Power Outlet and connect it to Power Jack of the main unit. Make sure to set ON/OFF switch by the side of the main unit to ON. Press ARMED and OFF button on remote control at the same time. The recently recorded image will appear on TV or Monitors screen. If the images have not been recorded your TV or monitor will Simply remain blank. HOW TO USE REMOTE CONTROL IN CHECKING MODE TO RECORDED IMAGE OFF Button : To check the Previously taken pictures Armed Button : The opposite direction to OFF button 14 When you wish to go back to normal mode after you check all the saved images, press Armed button & Off button at same time to go back to normal mode. If you wish to delete the all the images, press Emergency button and press Armed button to delete(DEL: ARM) them all. DEL : ARM EXIT : OFF will appear on the top right of the TV screen , then Press Off button to go back to normal mode or Emergency button to change to Setup Mode 15 SPECIFICATIONS Category Contents Components Image Storage Image Sensor Resolution Camera Angle Min. Light Lens Power Display Time Interval Number of Pictures Size Main Body 1, Camera 1, Remote Control 1, Power Adaptor 1, Video Cable 1, Users manual 1 Max. 42 images 1/4 CMOS B&W EIA(320 x 280 Pixels) Horizontal : 45 degree, Vertical : 32 degree 0.5 Lux 3.6mm Pin-hole lens 12V/500mA(AC Power Adaptor)/
Year/Month/Date/Hour/Minute 1 ~ 8 Seconds 1 ~ 8 Pictures Camera : 36 x 36 x 24 mm Main Body : 112 x 65 x 20 mm Remocon :35 x 54 x 12 mm Weight Camera : 60 g Main Body : 85 g Remocon : 25 g Confirmation Remote Control Frequency Use TV or Monitor Armed, Off(Disarmed), Emergency Setup, Checking the Images 311.06MHz 16