FCC ID: 2APR4-X6 Mercku 5G CPE X6

Authentication FCC Compliance Statement IC Compliance Statement Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part of the FCC Rules. Operation is subject to the following two conditions:

() this device may not cause harmful interference

() this device must accept any interference received, including interference that may cause undesired operation. Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance cm between the radiator & your body. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

() this device may not cause interference, and

() this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes:

() Cet dispositif ne peut causer des interfrences; et

() Cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil. The device is restricted to indoor use only when operating in the to MHz frequency range. RoHS Compliance Statement This device complies with the RoHS. Directive

(//EU) of the European Parliament and Amendments Commission Delegated Directive (EU)

/. EU Declaration of Conformity The device supports WIFI, G and G NR functions. It is in conformity with the relevant union harmonization legislation: Radio Equipment Directive: //EU. For the full RED DoC le, Please download it as follow web: https://www.mercku.com/download Mercku, Inc. Steeles Avenue East, Suite CB, Markham, Ontario, LR Z, Canada Mercku Europe GmbH Akazienstr. A, Berlin, Germany Mercku Inc. All rights reserved. www.mercku.com LTE Band : Tx: ~MHz/ Rx: ~MHz LTE Band : Tx: ~MHz/ Rx: ~MHz LTE Band : Tx: ~MHz/ Rx: ~MHz LTE Band : Rx: ~MHz LTE Band : Tx/Rx: ~MHz LTE Band : Tx/Rx: ~MHz LTE Band : Tx/Rx: ~MHz LTE Band : Tx/Rx: ~MHz NR Band n: Tx: ~MHz/ Rx: ~MHz NR Band n: Tx: ~MHz/ Rx: ~MHz NR Band n: Tx: ~MHz/ Rx: ~MHz NR Band n: Tx: ~MHz/ Rx: ~MHz NR Band n: Tx: ~MHz/ Rx: ~MHz NR Band n: Tx: ~MHz/ Rx: ~MHz NR Band n: Tx/Rx: ~MHz NR Band n: Tx/Rx: ~MHz NR Band n: Tx/Rx: ~MHz NR Band n: Tx/Rx: ~MHz NR Band n: Tx/Rx: ~MHz Max Transmit Power:

LTE Band : dBm LTE Band : dBm LTE Band : dBm LTE Band : dBm LTE Band : dBm LTE Band : dBm LTE Band : dBm LTE Band : dBm LTE Band : dBm LTE Band : dBm LTE Band : dBm

.G WiFi: . dBm G WiFi: . dBm NR Band n: dBm NR Band n: dBm NR Band n: dBm NR Band n: dBm NR Band n: dBm NR Band n: dBm NR Band n: dBm NR Band n: dBm NR Band n: dBm NR Band n: dBm NR Band n: dBm RF exposure This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of cm between the radiator and your body. Safety Information Keep the device away from water, re, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use damaged chargers or USB cables to charge the device. Do not use any other chargers than those recommended. Do not use the device where wireless devices are not allowed. Adapter shall be installed near the equipment and shall be easily accessible. Use only power supplies which are provided by the manufacturer and in the original packing of this product. If you have any questions, please dont hesitate to contact us. For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible. Frequency bands and power European Union The devices operate in the following frequency bands within the EU:

Wi.G with -MHz Wi G with MHz-MHz Band Wi G with MHz-MHz Band Wi G with MHz-MHz Band WiFi G with MHz-MHz Band LTE Band : Tx: ~MHz/ Rx: ~MHz LTE Band : Tx: ~MHz/ Rx: ~MHz LTE Band : Tx: ~MHz/ Rx: ~MHz Explanation of the symbols on the product label Symbol Explanation DC voltage RECYCLING This product bears the selective sorting symbol for Waste from Electrical and Electronic Equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. Regulatory Certication for Mercku G CPE X Country Certication Number Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom Canada United States IC ID: 23877-X6 FCC ID: 2APR4-X6

Mercku Inc. 3600 Steeles Avenue East, Suite C108B,Markham, Ontario,L3R 9Z7,Canada Date: 2023.5.29 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2APR4-X6 US Agent Attestation Statement / Part 2.911(d)(7)

[Mercku Inc.] certifies, that as of [5/29/2023], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: [2APR4-X6].

[Mercku Inc.], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Mercku Inc.] for FCC ID: [2APR4-X6]. Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: Mercku Inc. Designated Agent: FCC US Agent, LLC Company Representative: Shi Ge Designated Agent Representative: Tim Payne Signature:

Signature:

Mercku Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023.5.29 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2APR4-X6 Mercku Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Shi Ge Rev 1/26/2023 Mercku Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023.5.29 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2APR4-X6 Mercku Inc. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Shi Ge Rev 1/26/2023

Mercku Inc. U-NII-DTS Declaration Letter To whom it may concern :

We have declared below featured for FCC equipment authorization, Device FCC ID: 2APR4-X6

(1) DFS Device --

Master

, Client with Radar detection capability , Client without radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) 5180-5240 5745-5825 5190-5230 5270-5310 5755-5795 5210-5210 5290-5290 5775-5775 Active Scanning

(the device can transmit a probe

(beacon)) Yes , Yes , Yes , Yes , Yes , Yes , Yes , Yes , No No No No No No No No passive scanning

(where the device is can listen only with no probes) Yes , Yes , Yes , Yes , Yes , Yes , Yes , Yes , No No No No No No No No Ad Hoc Mode or WIFI Direct capability Access point capability Yes , Yes , Yes , Yes , Yes , Yes , Yes , Yes , No No No No No No No No Yes , Yes , Yes , Yes , Yes , Yes , Yes , Yes , No No No No No No No No

(3) If yes, pls explain how it was implemented : (pls also help to provide detail of options for each country selection) Country code selection ability -

Yes , No

(4) pls check below :

Meet 15.202 requirement -

Yes , No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. For client devices that have software configuration control to operate in different modes (active scanning in

(5) some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply ,

(If apply , pls help to provide explanation on it was implement , and how software was controlled) Clients Signature:

Shi Ge Date: 2023.6.2

Mercku Inc. SDoC Attestation Letter To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2APR4-X6 Product Description: Mercku 5G CPE X6 Type Designation: X1NA0 Trademark:

To Whom It May Concern:

Has been the units used for conducting FCC compliance testing, the SDoC part will be tested by EMTEK (SHENZHEN) CO., LTD. If you have any question or concerns, pls. contact us. Clients Signature:

Shi Ge Date: 2023.5.29