Model No.: ME-700 CONTENT PAGE QuickGuide - English QuickGuide - Japan QuickGuide -
QuickGuide -
FCC Statement 2 9 17 24 31
-1-
QuickGuide - English
-2-
Personal Sound Amplifier
(Receiver:ME-700R) Inside Package Binaural Earphone
(Including: a pair of Large, Medium, Small ear buds ) Wireless Microphone
(Transmitter: ME-700T) USB cable RCA stereo audio adapter Universal Adapter
(Including US, EU, UK, and AU adapter) Carry Case 3.5mm stereo audio cable Specification Personal Sound AmplifierReceiver Color Wireless MicrophoneTransmitter Color White Max Sound Pressure Level 1184 dBSPL@2,900Hz Max Full-on Gain 605dB Size Black Microphone Omnidirectional Operating Voltage 3.1~4.2V Max Line-In Voltage 32.5 mm L* 36 mm *W*14.9 mm H Weight 1.2 V Size 12.2g Operation time 32.5 mm L* 36 mm *W*14.9 mm H Weight Fully recharge 1 hour; Operating 3 hours. Binaural Earphone 12.2g Operating Time Fully recharge1 hour ; Operating 3 hours.
-3-
Functions LED indicator Earphone Jack USB Port Volume up Power Volume down Connect / Disconnect to wireless microphone Microphone Personal Sound Amplifier (Receiver : ME-700R) - White Power Reset Button Wireless Microphone(Transmitter : ME-700T) - Black ME-700 Thank you for choosing ME-700 Please read this manual guide before using ME-700 to avoid the risk of improper using. ME-700 is built in Li-ion rechargeable battery. The battery must be full charged for the first time. In order to extend the battery lifetime effectively, we suggest the product ME-700 should be charged during 5~40 C.
-4-
How To Use A.Plugging the Earphone into Personal Sound Amplifier (ME-700R). Please insert earphone into control box. B.Wearing Earphone Put the ear buds on your ear. Mark L represents left side. Mark R represents right side. C.Powering On Press the On/Off switch button for 3 seconds to turn on the Personal Sound Ampli-
fier (ME-700R) and Wireless microphone
(ME-700T). When the battery is fully charged, LED indicator the LED indicator is Green. ME-700 could not be turned on if the battery LED indicator is too low. D.Mode Switching(Connect/ Disconnect) Press connect/disconnect button on Personal Sound Amplifier (ME-700R), it will connect automatically. It will be disconnect automatically when you press the same button again. When disconnect, the personal sound amplifier can work individually as sound amplifier devise. NoticeWhen connect, the LED indicator is Blue. E.Volume Control Press +or - to adjust the level of volume. Volume up Volume down F.Turning the Power Off Press the On/Off switch button for 3 seconds to power off the ME-700. When power is off, the LED indicator light is off.
-5-
Power Connect / Disconnect to wireless microphone Power How to connect to TV STEP 1:Checking Accessories Please take out 3.5mm stereo audio cable (photo1) and RCA stereo audio adapter(photo2) from box, and connect RCA stereo audio adapter with stereo audio cable from 3.5mm port. 3.5mm stereo audio cable (photo1) STEP 2:RCA stereo audio adapter connects to TV Connect RCA plugs to Audio out (Right->Red, Left->White) on the television. (photo 3) TV volume will be delivered to wireless microphone of ME-700T,and the TV audio still works. RCA stereo audio adapter (photo2) L R White Red photo 3 STEP 3:3.5mm stereo audio cable connects to Wireless Microphone Connect audio cable to the wireless microphone and power on the wireless microphone. (photo 4) Check if the LED indicator of wireless microphone is green. 3.5mm stereo audio cable wireless microphone photo 4 STEP 4:Power on the Personal Sound Amplifier. Turn on the personal sound amplifier (ME-700R) and click the connect/disconnectto connect with the wireless microphone (ME-700T). When the LED indicator turns blue, it connects successful-
ly and can start to work.
-6-
LED Indicator The color of LED indicator illustrate the power status of ME-700 A.Personal Sound Amplifier (ME-700R)(White) Status Color of LED Indicator Disconnection with full charged Green Disconnection with low battery / charging Green with Blinking Orange Power On Connection with full charged Blue Connection with low battery / charging Blue with Blinking Orange Power Off Reset Not charged Charging Full charged Reset/ charging LED Off LED Off Orange Led Off Orange Flash B.Wireless Microphone (ME-700T)(Black) Status Color of LED Indicator Disconnection with full charged Green Disconnection with low battery / charging Green with Blinking Orange Power On Connection with full charged Blue Connection with low battery / charging Blue with Blinking Orange Power Off Reset Not charged Charging Full charged Reset/ charging LED Off LED Off Orange Led Off Orange Flash Trouble Shooting Please check below items see if any possibilities of malfunction. If you can not find a solution from the following Q&A, please contact the local distributor for customer service Questions 1.Can not turn on?
Answers Please check the power status ?
Please make sure to press 3 seconds for turing on?
Please make sure the earphone is inserted in the 2.No Voice?
personal sound amplifier (white). Try to adjust the volume
-7-
Question 3.Can not connect?
4.High-pitched noises in earphone 5.How to use personal sound amplifier?
6.System Reset Trouble Shooting Answer Please check both personal sound amplifier and wireless microphone are powered on. Please press the connect/disconnect button again, and wait for 5 secs. In the connection mode, the LED indicator is blinking blue. The LED indicator is blue when connects successfully. During the regular connection process, the blue indicator will be blinking. After the connection confirmed, the indicator is blue. Insert ear buds tightly into ear canal or change the different size of ear buds. Reduce volume or increase the distance between the earphone and the microphone of control box. Please check the power status of personal sound amplifier (white)?
Please check if it disconnected with wireless microphone. Please check if the LED indicator is Green. Personal Sound Amplifier (White), please press connect button for 10 seconds till it to turn off. Turn on the device, and it will start to run normally. Wireless Microphone (Black), please press reset button for 10 seconds till it to turn off. Turn on the device, and it will start to run normally. If still cannot turn on or turn off the product after undergoing the above actions. Please kindly repeat again, or call Merry service phone number for further assistance. Notice This product is not a hearing aid. If you have any hearing problems, please see doctor for advising. This symbol indicates that integral electrical equipment must not be treated as household waste. It should be taken to the relevant collection depot for the recycling of electrical and electronics equipment. Eco-friendly Warning If you feel uncomfortable or tinnitus, please stopping using this product and having hearing check. Please keep ME-700 away from children and pets. In case children or pets swallow it. If swallows it by accident, please consult a doctor immediately. Do not use ME-700 where it is forbidden to use electronic device. Please keep ME-700 away from fire (high temperature), water(humid environment), or any device generating high voltage of electronics. Please use the AC adapter provided by Merry Electronics to recharge your ME-700. MERRY ELECTRONICS CO., LTD No.22, 23rd Road, Taichung Industrial Park, Taichung, 40850 Taiwan, R.O.C. Hear@merry.com.tw http://www.merryhealthcare.com/
Merry Service Phone Number:+886289132381
-8-
Manufacturer MERRY ELECTRONICS (SHENZHEN) CO., LTD. Merry Ind. Park Hua Rong Rd., DaLang, BaoAn, ShenZhen, 518109 China QuickGuide - JP
-9-
(:ME-700R)
(:ME-700T) USB AV AC 3.5mm
(:ME-700R) 1184 dBSPL@2,900Hz 605db 32.5 mm* 36 mm **14.9 mm 12.2g 1 3
(:ME-700T)
() 1.2 V 32.5 mm * 36 mm **14.9 mm 12.2g 1 3
-10-
() USB
*
()
*
()
*
ME-700 5-40C
-11-
A.
*
B. RL C. D. 52
*
E. F. 3
-12-
(1) 3.5mm(1)AV (2)
(3) 3.5mm(1) AV (2)
(2)
(3) L R 3
(3)()
(4) 3.5mm 4
()
(4)() 5 2
*
-13-
(1) USB/
(2) LED
/
(3) /
LED LED A. (:ME-700R)
*
*
B. (:ME-700T)
*
*
-14-
1. 3 10 2. 3.2 2 LED 10 4. 5. LED 10 6. 3 10
-15-
13 ME-700 MERRY ELECTRONICS CO., LTD No.22, 23rd Road, Taichung Industrial Park, Taichung, 40850 Taiwan, R.O.C. Hear@merry.com.tw http://www.merryhealthcare.com/
Merry Service Phone Number:+886289132381 Manufacturer MERRY ELECTRONICS (SHENZHEN) CO., LTD. Merry Ind. Park Hua Rong Rd., DaLang, BaoAn, ShenZhen, 518109 China
-16-
( ME-700R) USB
( ME-700T) Reset ME-700 5~40C
-19-
QuickGuide -
-17-
(ME-700R)
(ME-700T) USB AV
:ME-700R 1184 dBSPL@2,900Hz 605dB 32.5 mm 36 mm 14.9 mm 12.2 1 3()
:ME-700T Line-In 1.2 V 3.1V~4.2V 32.5 mm 36 mm 14.9 mm 12.2 1 3()
-18-
A. B. R L C.
( ME-700R)
( ME-700T)3 D.(/)
( ME-700R) E. F. 3
-20-
()
()AV()AV 3.5mm
() AV()
() AVAudio out()()()() ME-700 L R
()( ME-700T)
()
()( ME-700R)
-21-
A.( ME-700R)
()
()
/
/
/
/
(Reset)
(Reset) ()
() B.( ME-700T)
/
/
/
/
(Reset)
(Reset) ()
() 1.?
?
3?
2.?
()
-22-
3.?
() () 5 4. 5. 6.(Reset)
()?
?()
(ME-700R)(Connect)10
(ME-700T)Reset10
:
NCC 408502322 hear@merry.com.tw www.merryhealthcare.com
+886 289132381 MERRY ELECTRONICS (SHENZHEN) CO., LTD. Merry Ind. Park Hua Rong Rd., DaLang, BaoAn, ShenZhen, 518109 China
-23-
QuickGuide -
-24-
(ME-700R)
(ME-700T) USB AV
( ME-700R) 1184 dBSPL@2,900Hz 605dB 32.5 mm 36 mm 14.9 mm 12.2 13
()
( ME-700T) Line-In 3.1V~4.2V 1.2 V 32.5 mm 36 mm 14.9 mm 12.2 13
()
-25-
USB
(ME-700R) Reset
(ME-700T) ME-700 5~40
-26-
A. B. R L C.
(ME-700R)
(ME-700T)3 D.(/)
(ME-700R) E. F. 3
-27-
()
()AV() AV3.5mm
()
() AV() AVAudio out()()()() ME-700 L R
() (ME-700T)
() (ME-700R)
-28-
A. ( ME-700R)
()
()
/
/
/
/
(Reset)
(Reset)() B. (ME-700T)
()
()
/
/
/
/
(Reset)
(Reset)() 1.?
?
3?
2.?
()
-29-
3.?
4. 5.
?
6.(Reset)
()() 5
()?
?()
(ME-700R)
(Connect)10
(ME-700R)Reset
()10
:
408502322 hear@merry.com.tw www.merryhealthcare.com
+886 289132381 MERRY ELECTRONICS (SHENZHEN) CO., LTD. Merry Ind. Park Hua Rong Rd., DaLang, BaoAn, ShenZhen, 518109 China
-30-
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAUTION:
To assure continued FCC compliance:
Any changes or modifications not expressly approved by the grantee device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
-31-