Meshreen MS5168 ZigBee Module MS5168-Mxx series USER MANUAL FCC ID :2AC2E-68M03 Meshreen DSMS5168/info@meshreen.com 1 2. 3. 4. 5. 6. 7. 8. Content 1. Introduction.........................................................................................................................................................3 1.1 Variants.................................................................................................................................................3 Specification........................................................................................................................................................4 2.1 Pinconfigurations.................................................................................................................................5 PinAssignment......................................................................................................................................6 2.2 2.3
.PinDescription.....................................................................................................................................7 2.4 PowerSupplies......................................................................................................................................7 ElectricalCharacteristics......................................................................................................................................8 3.1 MaximumRatings.................................................................................................................................8 3.2 OperationConditions............................................................................................................................8 OutlineDrawing...................................................................................................................................................9 4.1 ModulePCBFootprint.........................................................................................................................12 OptimalPCBplacementoftheMS5168M00/M05Module.............................................................................13 ReflowProfile....................................................................................................................................................14 OrderingInformation........................................................................................................................................15 VersionControl..................................................................................................................................................15 Figure1Pin Configuration (top view)...................................................................................................................5 Figure2MS5168M00OutlineDrawing.......................................................................................................................9 Figure3MS5168M04OutlineDrawing.......................................................................................................................9 Figure4MS5168M03outlinedrawing......................................................................................................................10 Figure5MS5168M04/M05OutlineDrawing.............................................................................................................11 Figure6PCBfootprint.................................................................................................................................................12 Figure7OptimalPCBplacement................................................................................................................................13 Figure8ModuleReflowprofilereference..................................................................................................................14 Table1Meshreenmodulevariants...............................................................................................................................3 Table2Modulespecification........................................................................................................................................4 Table3 PinAssignment..............................................................................................................................................6 Table4MaximumRatings.............................................................................................................................................8 Table5OperationConditions.......................................................................................................................................8 Meshreen DSMS5168/info@meshreen.com 2 1. Introduction TheMS5168001Myyfamilyisarangeofultralowpower,highperformancesurfacemountmodulestargetedat IEEE802.15.4,JenNetIP,ZigBeeLightLink,ZigBeeSmartEnergyandRF4CEnetworkingapplications,enablingusers torealizeproductswithminimumtimetomarketandatthelowestcost.Theyremovetheneedforexpensiveand lengthydevelopmentofcustomRFboarddesignsandtestsuites.ThemodulesuseNXPsMS5168wireless microcontrollertoprovideacomprehensivesolutionwithlargememory,highCPUandradioperformanceandall RFcomponentsincluded.Allthatisrequiredtodevelopandmanufacturewirelesscontrolorsensingproductsisto connectapowersupplyandperipheralssuchasswitches,actuatorsandsensors,considerablysimplifyingproduct development. 1.1 Variants Variant Description MS5168M00 MS5168M03 MS5168M04 MS5168M05 JN5168 IEEE802.15.4/ZigBee Standard Power Module with embedded PCB antenna JN5168 IEEE802.15.4/ZigBee Standard Power Module with -FL connector JN5168 IEEE802.15.4/ZigBee High Power Module with -FL connector JN5168 IEEE802.15.4/ZigBee High Power Module with embedded PCB antenna Table1Meshreenmodulevariants Meshreen DSMS5168/info@meshreen.com 3 2. Specification Therearedifferencesbetweenmodules,theparametersaredefinedhere. TypicalRFCharacteristics VDD=3.3V@+25C TypicalDCCharacteristics Deepsleepcurrent SleepCurrent RadioTransmitcurrent Radioreceivecurrent Centrefrequencyaccuracy Receivesensitivity MaximumTransmitpower Maximuminputsignal RSSIrange(dBm) RFPortimpedance SMA/uFlconnector RxSpuriousEmissions TxSpuriousEmissions VSWR(max) MasterSPIport SlaveSPIport TwoUARTs TwowireserialI/F(compatiblewith SMbus&I2C) 5xPWM(4xtimer,1xtimer/counter) TwoprogrammableSleepTimers Digital IO lines (multiplexed with UARTs,timersandSPIselects) AnaloguetoDigital channel Four converter Programmableanaloguecomparators Internal temperature and sensor batterymonitor Peripherals M00/03 100nA 0.70uA 15.3mA 17mA
+/25ppm 95dBm
+2.5dBm 10dBm 95~10dBm 50ohm 61dBm 40dBm 2:1 3selects 20 M04/05 100nA 0.70A 150mA 22mA
+/25ppm 100dBm
+19dBm
+5dBm 105~20 50ohm 69dBm 49dBm 2:1 3selects 18 Notes Withactivesleeptimer CPU+Protocol+radiotransmitting CPUindoze+radioreceiving Additional+/15ppmallowancefor temperatureandageing Notes Nominalfor1%PER,asper 802.15.4section6.5.3.3(Note1) For1%PER,measuredassensitivity 2.42.5GHz Measuredconductedinto50ohms Measuredconductedinto50ohms 2.42.5GHz Notes 250kHz16MHz 250kHz8MHz 16550compatible Upto400kHz 16MHzclock 32kHzclock 10bit,upto100ks/s Ultralowpowermodeforsleep Table2Modulespecification Meshreen DSMS5168/info@meshreen.com 4 2.1 Pinconfigurations Figure1Pin Configuration (top view) Note that the same basic pin configuration applies for all module designs. However, DIO3(pin9) and DIO2(pin8) are not available on the high power modules. Meshreen DSMS5168/info@meshreen.com 5 Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2.2 PinAssignment Primary Alternate Functions Pin Functions ADC1 DO0 DO1 DIO18 DIO19 DIO0 DIO1 DIO2*
DIO3*
DIO4 SPICLK SPIMISO SPIMOSI SPISEL0 SPISEL1 ADC3 SPISEL2 ADC4 PC0 PWM2 PWM3 RFRX TIM0CK_GT CTS0 RFTX JTAG_TCK TIM0CAP TIM0OUT DIO5 RTS0 JTAG_TMS PWM1 DIO6 TXD0 JTAG_TDO PWM2 DIO7 RXD0 JTAG_TDI PWM3 DIO8 TIM0CK_GTPC1 PWM4 DIO9 TIM0CAP 32KXTALIN RXD1 32KIN DIO10 TIM0OUT 32KXTALOUT VDD GND DIO11 DIO12 PWM1 PWM2 CTS0 TXD1 JTAG_TCK PC0 PC1 ADO or SPISMOSI ADE or SPIMISO 21 DIO13 PWM3 RTS0 JTAG_TMS 22 23 24 25 26 RESETN DIO14 SIF_CLK TXD0 TXD1 JTAG_TDO SPISEL1 or SPISSEL DIO15 SIF_D RXD0 RXD1 JTAG_TDI SPISEL2 DIO16 COMP1P SIF_CLK SPISMOSI DIO17 COMP1M PWM4 I2C DATA SPISIMO ADC2 27 Table3 PinAssignment Signal Type 3.3V CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS 3.3V 0V CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS 3.3V Description Analogue to Digital Input SPI Master Clock Output or PWM2 Output SPI Master In Slave Out Input SPI Master Out Slave In Output or PWM3 Output SPI Select From Module SS0 Output DIO0, SPI Slave Select Output 1 or ADC input 3 DIO1, SPI Slave Select Output 2, ADC input 4 or Pulse Counter 0 input DIO2, Radio Receive Control Output or Timer0 Clock/Gate Input DIO3, Radio Transmit Control Output or Timer0 Capture DIO4, UART 0 Clear To Send Input, JTAG CLK Input, Timer0 PWM output, or Pulse Counter 0 Input DIO5, UART 0 Request To Send Output, JTAG Mode Select Input, PWM1 Output or Pulse Counter 1 Input DIO6, UART 0 Transmit Data Output, JTAG Data Output or PWM2 Output DIO7, UART 0 Receive Data Input, JTAG Data Input or PWM 3 Output DIO8, Timer0 Clock/Gate Input, Pulse Counter1 Input or PWM 4 Output DIO9, Timer0 Capture Input, 32K External Crystal Input, UART 1 Receive Data Input or 32K External Clock Input DIO10, Timer0 PWM Output or 32K External Crystal O t Supply Voltage t Digital Ground DIO11, PWM1 Output or Timer1 Data Output DIO12, PWM2 Output, UART0 Clear To Send Input, JTAG CLK Input, Antenna Diversity Odd Output or SPI Slave Master Out Slave In Input DIO13, PWM3 Output, UART0 Request To Send Output, JTAG Mode Select Input, Antenna Diversity Even output or SPI Slave Master In Slave Out Output Reset input DIO14, Serial Interface Clock, UART 0 Transmit Data Output, UART1 Transmit Data Output, JTAG Data Output, SPI Master Select Output 1 or SPI Slave Select Input DIO15, Serial Interface Data or Intelligent Peripheral Data Out DIO16, Comparator Positive Input, Serial Interface clock or SPI Slave Master Output Slave In Input DIO17, Comparator Negative Input, Serial Interface Data or SPI Slave Master In Slave Out Output Analogue to Digital Input
*ThesetwopinsarenotconnectedforJN5168001M04&JN5168001M05modules. Meshreen DSMS5168/info@meshreen.com 6 2.3
.PinDescription All pins behave as described in the DS- MS5168 Wireless Microcontroller Datasheet, with the exception of the following:
2.4 PowerSupplies A single power supply pin, VDD is provided. Meshreen DSMS5168/info@meshreen.com 7 3. ElectricalCharacteristics In most cases, the Electrical Characteristics are the same for both module and chip. They are described in detail in the chip datasheet. Where there are differences, they are detailed below 3.1 MaximumRatings Exceeding these conditions will result in damage to the device. Parameter DevicesupplyvoltageVDD AllPins Storagetemperature Table4MaximumRatings Min 0.3V 0.3V 40C Max 3.6V VDD+0.3V 150C 3.2 OperationConditions Supply VDD Ambient temperature range Table5OperationConditions Min 2.0V
-40C Max 3.6V 85C Meshreen DSMS5168/info@meshreen.com 8 4. OutlineDrawing Thickness:2.8mm FourcornerofPCBarePCBVCuttolerance Figure3MS5168M04OutlineDrawing Meshreen DSMS5168/info@meshreen.com 9 Thickness:2.8mm FourcornerofPCBarePCBVCuttolerance Figure4MS5168M03outlinedrawing Meshreen DSMS5168/info@meshreen.com 10 Thickness:2.8mm FourcornerofPCBarePCBVCuttolerance Figure5MS5168M04/M05OutlineDrawing Meshreen DSMS5168/info@meshreen.com 11 4.1 ModulePCBFootprint Note1:Allmoduleshavethesamefootprint Note2:AllDimensionsaremm Figure6PCBfootprint Meshreen DSMS5168/info@meshreen.com 12 5. OptimalPCBplacementoftheMS5168M00/M05Module TheJN5168M00/M05modulefeaturesanoptimized,lowcost,integrated,invertedF,printedPCBantenna.The antennahasaverticallypolarizednearomnidirectionalradiationpatternandupto1.6dBiofpeakgain.ThePCB designhasbeenelongatedinordertoincreasethegroundplaneareawhichincreasestheantennaefficiency.This allowsstandaloneoperationwithoutanyadditionalgroundplanehowevercaremustbetakenwhenmountingthis moduleontoanotherPCB.Theareaaroundtheantennamustbekeptclearofconductorsorothermetalobjects foranabsoluteminimumof20mm.ThisistrueforalllayersofthePCBandnotjustthetoplayer.Anyconductive objectsclosetotheantennacouldseverelydisrupttheantennapatternresultingindeepnullsandhighdirectivity insomedirections. Thediagramsbelowshowvariouspossiblescenarios.Thetop3scenariosarecorrect;groundplanemaybeplaced beneathMS5168M00/M05moduleaslongasitdoesnotprotrudebeyondtheedgeofthetoplayergroundplane onthemodulePCB. Thebottom3scenariosareincorrect;thelefthandsideexamplebecausethereisgroundplaneunderneaththe antenna,themiddleexamplebecausethereisinsufficientclearancearoundtheantenna(itisbesttohaveno conductorsanywhereneartheantenna),finallytherighthandexamplehasabatterysmetalcasinginthe recommendedkeepoutarea. Figure7OptimalPCBplacement Note:TheantennaradiationpatternissameasJN5168001M00 Meshreen DSMS5168/info@meshreen.com 13 6. ReflowProfile Forreflowsoldering,itisrecommendedtofollowthereflowprofileinfigure6asaguide,aswellasthepaste manufacturersguidelinesonpeakflowtemperature,soaktimes,timeaboveliquidandramprates. Figure8ModuleReflowprofilereference Meshreen DSMS5168/info@meshreen.com 14 7. OrderingInformation MS5168Mxx 8. VersionControl 9. Warning 2013.11.05 2014.03.21 2014.05.12 2014.07.02 1stIssue Version Notes Date 1.0 1.3 1.4 1.5 ModuleType:
00:StandardPower,CeramicAntenna 03:StandardPower,Flconnector 04:HighPower,Flconnector 05:HighPower,PCBAntenna MainChipVariant:
5168:MS5168001 UpdatePINI/Onames AddPicture,updatethickness Modifymoduleoutline,DeleteLabeldefinition Informationtouser. Notice:
Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Meshreen DSMS5168/info@meshreen.com 15 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. RFRadiationExposureStatement 1. This Transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Meshreen DSMS5168/info@meshreen.com 16 OEMNotice For a host using a certified modular with a standard fixed label, if (1) the modules FCC ID is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module: Contains Transmitter Module FCC ID: 2AC2E-68M03 or Contains FCC ID: 2AC2E-68M03 must be used. The host OEM user manual must also contain clear instructions on how end users can find and/or access the module and the FCC ID. MeshreenLtd., Tel:+88633594766 Fax:+88633594733 Email:info@meshreen.com http://meshreen.com Meshreen DSMS5168/info@meshreen.com 17