3-PIECES CD SHELF SYSTEM
with Digital PLL AM/FM Stereo Radio and
Bluetooth® Wireless Technology
OWNER'S MANUAL
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
MODEL: MM435M
Size: 148.5(W) x 210(H)mm (A5)
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
The users manual or instruction manual for an
intentional or unintentional radiator shall caution
the user that changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment. In cases where the manual
is provided only in a form other than paper, such
as on a computer disk or over the Internet, the
information required by this section may be
included in the manual in that alternative form,
provided the user can reasonably be expected to
have the capability to access information in that
form.
5
LOCATION OF CONTROLS
1
2
25
26
3 4 5 6 7 8 9 10 11 12 13
24
14 15 16 17 18 19
20 21 22 23
6
1. CD DOOR
14.
VOLUME Control Knob
2. CD Door OPEN (Close) Area
15.
AL SET (Alarm Set) Button
.3
POWER Button
4. FUNCTION Button
5. REPEAT Button
16.
SLEEP Button
17.
DIMMER Button
18.
AL ON/OFF (Alarm On/Off) Button
6. PROG (Program) Button
19.
DBBS (Dynamic Bass Boost System) Control Knob
7.
(cid:28) (Previous/Skip Backward) Button
20.
TIME
(Set) Button
8. LCD Display
(cid:29) (Next/Skip Forward) Button
9.
n
10.
■ (Stop) Button
11.
(cid:23)(cid:30) (Play/Pause) Button
12.
SNOOZE Button
13.
MUTE Button
21.
MEM- Button
22.
MEM+ Button
23.
MEMORY Button
24.
POWER Indicator
25.
Remote Receiver
26.
AUX-IN Port
1 2 3 4
1. FM Wire Antenna
3.
SPEAKER OUT L (Left) Jack
2.
SPEAKER OUT R (Right) Jack
4. AC Power Cord
7
Battery Door
1
2
6
1. (cid:30)(Play/Pause) Button
2. (cid:29)(Next/Skip Forward) Button
3. (cid:28)(Previous/Skip Backward) Button
5. REPEAT Button
4. ■ (Stop) Button
6. Battery Holder
5
3
4
8
CONNECTION:
Connect the small plug from the Left and Right Speaker Boxes to the SPEAKER OUT
L & R Jacks on the rear of main unit as the illustrated below:
Right Speaker Box
Left Speaker Box
POWER SOURCE:
Main Unit:
Unwind the AC power cord and extend it to its full length. Insert the AC plug of the
cord into any convenient AC 120V~; 60Hz household outlet as the illustrated below:
9
Notes:
(cid:122) This unit is equipped with a polarized AC plug which has one blade wider than
the other. This is a safety feature to reduce the likelihood of electric shock. This
polarized AC plug will only fit in a polarized AC outlet. If you find that you cannot
insert this plug into your outlet, you may have an obsolete non-polarized outlet.
Please do not try to defeat this safety feature by using a non-polarized adaptor or
by filling the wider blade to make it fit into your outlet. If this plug does not fit into
your outlet, you should contact a qualified licensed electrician to replace your
obsolete outlet.
(cid:122) If the AC power fails, this electronic clock is designed to continue operating
internally (without showing the time on the LCD Display) with two (2) AAA size
batteries (not included).
Install the batteries as follows:
(cid:132) Open the battery door on the bottom of the unit by press the tab and then
lifting it as illustrated below:
(cid:132) Insert two (2) AAA size batteries (not included) according to the polarity
diagram inside the battery compartment. (Alkaline batteries are
recommended.)
(cid:132) Replace the battery door.
10
REMOTE CONTROL:
First time use:
Remove and discard the insulation film as the illustrated follows:
l
I
n
s
u
a
t
i
o
n
F
i
l
m
P
u
s
h
h
e
r
e
CR2025
Slide out
Replacing the button cell when it is drained:
(cid:122) Push and slide out the battery holder as the illustrated below.
(cid:122) Replace the button cell with new CR2025 button cell as the polarity markings on
the rear of the Remote Control.
(cid:122) Close the battery holder.
BATTERY PRECAUTIONS:
Follow these Battery Precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the
battery compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or
4.
old batteries with fresh ones.
If the batteries in the device are consumed or the device is not to be used for a
long period of time, remove the batteries to prevent damage or injury from
11
possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat
and rupture. (Follow battery manufacturer’s instructions.)
6. Do not dispose of battery in fire. Battery may explodes or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.
8.
⚠
This product contains a coin/button cell battery. If the coin/button cell
battery is swallowed, it can cause severe internal burn in just 2 hours and can lead
to death.
Keep new and used batteries away from children. If the battery compartment does
not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
EFFECTIVE DISTANCE OF REMOTE CONTROL
<±45°
25 Feet
(cid:122) When there is an obstacle blocking between the sensor, the remote may not
work.
(cid:122) When direct sunlight, or any other strong light shines on the remote control, the
remote operation may be unstable.
12
OPERATION
GENERAL OPERATION:
1. Connect the unit to AC power as previously instructed. The unit will enter to
2.
3.
standby mode automatically and the LCD Display will illuminate.
Press the POWER Button on the main unit or remote control to turn on the unit
from standby mode. The POWER Indicator will illuminate.
Press the FUNCTION Button on the main unit or remote control repeatedly to
switch to desired playback mode. The correspondent indicator will appear on
the display with your selection (see list below):
Playback Mode:
CD
BT (Bluetooth)
AUX
FM
AM
“Cd” will appear on the display
“bt” will appear on the display
"AUX" will appear on the display
“FM” will appear on the display
"AM" will appear on the display
Indicators:
4. During playback,
to the speakers
(cid:122) Turn the VOLUME Control Knob on the unit to adjust volume level as desired.
(cid:122) Turn t he DBBS (Dynamic Bass Boost System) to enhance the bass of the sound
5.
Press the DIMMER Button on the main unit or remote control repeatedly to set the
brightness level of display.
6. When finished listening, press the POWER Button on the unit or remote control to
turn back to standby mode.
CLOCK:
To set or reset the time:
In Standby mode, press and holding the TIME SET Button on main unit or
remote control, time on display will blinking. Then:
(cid:122) Press the or Button on the main unit or remote control to set hour.
(Make sure the PM Indicator appearing on the display if the time is PM)
(cid:122) Press the TIME SET Button on the main unit or remote control again on the
(cid:122)
(cid:122)
unit to set minute.
Press the or Button on the main unit or remote control to set minute.
When finished settings, release the TIME SET Button on the main unit or
remote control to save the settings and exit, time on display will stop
blinking.
13
)
Snooze:
(cid:122) When the alarm sounds, tap the SNOOZE BUTTON to temporarily turn off
the alarm and activate the snooze function, the alarm will stop and sound
again 9 minutes later. If you tap the SNOOZE BUTTON again, the alarm
will temporarily turn off again and sound again in 9 minutes and so on.
CD:
CD Playback:
1. Open the CD door by press the CD OPEN (Close) area.
2. Place a CD disc on the center spindle, with the printed label side up.
3. Close the CD Door by press the CD OPEN (Close) area.
4. Power on the unit and enter to CD mode as previously instructed. “Cd” indicator
will appear on the display.
5. Wait a few seconds until the total number of tracks appears on the display. Then
press the (cid:23)(cid:30) Play/Pause Button on the unit or Remote Control to start playback.
6. During playback:
(cid:122) Press the (cid:23)(cid:30) Play/Pause Button on the unit or Remote Control to pause,
press again to resume normal playback.
(cid:122) Press the(cid:29) (Next/Skip F orward) or (cid:28) (Previous/Skip Backward) Buttons on
the unit or Remote Control repeatedly to skip tracks.
(cid:122) Press and holding the(cid:29) (Next/Skip Froward) or (cid:28) (Previous/Skip Backward)
Buttons on the unit or Remote Control repeatedly to fast searching
the specified section.
(cid:122) To stop, press the ■ (Stop) Button on the unit or Remote Control.
Repeat / Random Playback :
1. During playback, press the REPEAT Button on the unit or Remote Control once.
” indicator will appear on the display. The current track will playback
“
repeatedly.
2. During playback, press the REPEAT Button twice. “
” indicator will
appear on the display. All the tracks on the current disc will be playback
repeatedly.
3. During playback, press the REPEAT Button three times. “ ” indicator will
appear on the display. All the tracks on the current disc will be playback
randomly.
To cancel the Repeat/Random function, press the REPEAT Button repeatedly
until all the repeat indicators disappear on the display.
4.
Programmed Playback:
Up to 20 tracks can be programmed playback as follows:
15
2.
1.
In CD stop playing mode, press the PROG (Program) Button on main unit or remote
control. “P01” will appear on the display and PROG indicator will blink.
Select the first specific track to be programmed by pressing the (cid:29) (Next/Skip
Forward) or (cid:28) (Previous/Skip Backward) Buttons on the unit or Remote Control
repeatedly.
Press the PROG Button again to store the selected track into the memory.
3.
4. Repeat steps 2 and 3 until all the specific tracks stored into the memory.
5.
Press the (cid:23)(cid:30) Play/Pause Button on the unit or Remote Control to start program
playback.
To stop press the ■(Stop) Button on the unit or Remote Control once. “PROG”
indicator will remain on the display. Then press (cid:30)(cid:23) Button to start program
again.
To stop and cancel the program, press the ■ (Stop) Button on the unit or Remote
Control twice. “PROG” indicator on the display will disappear.
playback
6.
7.
BT (BLUETOOTH) :
BT (Bluetooth) pairing
First time use or re-pairing the unit to a new BT Device, pair as follows:
1.
2.
Power on the unit and enter to BT mode as previously instructed. “bt” indicator
will appear on the display and blink.
Power on the external BT Device and enter to BT searching mode. Start pairing
following the on screen instructions from the external BT Device. After paired, the
“bt” indicator on the display will stop blinking.
If pairing is complete you may now play music with your external BT Device.
3.
4. During playback:
(cid:122) Press the (cid:23)(cid:30) Play/Pause Button on the unit or Remote Control to pause,
press again to resume normal playback.
(cid:122) Press the (cid:29)(cid:3)(cid:3)(Next/Skip Forward) or (cid:28) (Previous/Skip Backward) Buttons
on the unit or Remote Control repeatedly to skip tracks.
Notes:
(cid:122) When the external BT Device searched the unit, model number “MM435M” will
appear on the display of external BT Device.
(cid:122) If while pairing you are asked for a code, please try "0000" or "1234".
Normal operation after pairing:
1.
2.
4.
Turn on the BT function of the external BT Device.
Power on the unit and enter to BT mode as previously instructed. “bt” indicator
will appear on the display and blink.
3. Wait a few seconds until the unit is automatically paired to the external BT
Device. (“bt” indicator on the display will stop blinking).
After pairing is complete you may now play music with your external BT Device.
16
AUX IN:
included).
1. Connect the external Audio Device with a 3.5mm AUX cable. (Cable not
2.
3.
4.
Insert one end of the AUX cable to the Phone; Line Out or AUX Out Jack on the
external Audio player.
Power on the unit from Standby mode by press the POWER Button on the unit
to select AUX In mode. Insert the other end of the AUX cable into the AUX In
Port on the front of unit. “AUX” indicator will appear on the display.
Play the music on the connected Player as usual. (Make sure the volume level of
the connected Audio Player is turned to high level.)
AM/FM RADIO:
1.
Power on the unit and enter to Radio mode as previously instructed. “AM” or “FM”
indicator and the radio frequency will appear on the display.
2.
Press the
or Button to select the radio station as desired.
AUTO SCAN RADIO:
Press and hold
Play/Pause Button for 2 seconds
The unit will auto scan available station in AM or FM band and store in the
preset memory.
To navigate through the stored presets, press the MEM+ or MEM- Buttons.
SETTING AM/FM RADIO PRESETS:
Find the AM/FM radio station you would like to save.
Press the MEMORY Button on the main unit or MEMORY Button on the remote
control.
Press or
"P01, P02, etc..."
Press the MEMORY Button on the main unit or press MEMORY Button on remote
control again to save the station.
buttons to select the preferred Preset Number,The display will show
5. Repeat steps 1-4 until you have finished saving your presets.
6.
To navigate through the stored presets, press the MEM+ or MEM- Buttons.
Notes:
(cid:122) If stereo FM radio station is receiving in FM band. The FM stereo indicator "
"
will appear on the display automatically.
(cid:122) This unit can store up to 30 FM radio stations and 20 AM radio stations presets
Antennas:
AM – This unit has a build in ferrite rod antenna, which provides adequate reception in most
areas. If reception is weak, turn the unit to improve reception.
FM – The FM Wire Antenna is for FM reception only. If reception is weak, unwound and relocation
the wire antenna.
1.
2.
3.
1.
2.
3.
4.
17
TROUBLESHOOTING
Check the following before requesting service:
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
No power
AC Power cord had not connected
Plug the AC Cord to any wall
No sound or sound weak
Sound distortion
outlet having AC 120V~; 60Hz
Volume of the unit was set to minimum
Increase the volume level by
position
turning the VOLUME Control
Knob
clockwise
Volume level of paired/connected
Rise the volume level of the
device is in low level
paired/connected device
Volume level too high
Reduce the volume level by
turning the VOLUME Control
Knob
counterclockwise
Volume level of the connected/paired
Reduce the volume level of the
device too high
connected/paired device
Unit not in BT mode
Press the FUNCTION Button
back to standby mode
repeatedly until “bt” appear on
the display
paired to the unit
the unit as page 15
The external BT device too far from
Place the external BT device
the unit
close to the unit
Unit not in CD mode
Press the FUNCTION Button
Alarm not functioning
Unit is not in standby mode
Press POWER button to turn
BT not functioning
The external BT device had NOT
Pair the external BT Device to
CD not play
CD disc incorrect install
Place the CD disc on the center
Disc is dirty or scratched
Radio not function
Unit not in radio mode
Press the FUNCTION Button
repeatedly until “Cd” appear on
the display
spindle with label side face up
Try other discs or clean the
discs
repeatedly until “AM” or “FM”
indicator appear on the display
Radio reception not good
The direction or location no good for
Turn the unit to a new direction
radio reception
or replace the unit to a new
location
18
3V; 2 x “AAA” size batteries (Not
SPECIFICATTIONS
Power Source:
Clock Back Up:
BT Version:
AC 120V~; 60Hz; 18W
DC
included)
5.0
BT Operation Distance:
<=32 Feet in open area
Radio Frequency:
AM: 520-1710kHz
FM: 87.5-108MHz
CD; CD-R; CD-RW
Disc Compatible:
Impedance of Speakers: 2 x 3W; 4ohm
Audio power:
2 x 2W (Total 4W, RMS)
ACCESSORIES
1 x User’s Manual
1 x Remote Control (Uses 1 x CR2025 Button Cell, Included)
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE
WITHOUT NOTICE
19
LIMITED WARRANTY
Craig Electronics warrants this product to be free from manufacturing defects in material
and workmanship under normal use for a period of 180 days from date of purchase. If
service is required, please return the product to the store where it was purchased for
exchange; or, pack the unit in the original packing material with all accessories if
applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $12 (to
cover shipping and handling costs) payable to Craig Electronics Inc. For consumers in
Canada, please make sure that the cashier check or money order is redeemable through
a U.S. bank. Ship your product freight pre-paid. Your unit will be repaired, replaced or if
the unit cannot be repaired or replaced, a refund will be forwarded to you within four
weeks of receipt of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
This product has been manufactured by and is sold under the responsibility of Craig
Electronics Inc, and Craig Electronics Inc is the warrantor in relation to this product.
MAGNAVOX and SMART. VERY SMART are registered trademarks of Koninklijke Philips
N.V. and are used under license from Koninklijke Philips N.V.
To Obtain Service on your Product
email: magnavox@craigelectronics.com
Printed in China
MM435M_WC_E0GZ1_B0US