OWNER'S MANUAL PLEASE READ BEFORE USING THIS UNIT
TThis equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 1
2
3 Control Location (Top Views) HANDLE CD DOOR PROGRAM BUTTON SKIP BACKWARD BUTTON STOP/BLUETOOTH PAIR BUTTON FM ROD ANTENNA PLAY/PAUSE BUTTON REPEAT BUTTON TRACK DISPLAY (CD ONLY) PROG POWER PAIR T P R
BLUETOOTH INDICATOR
INDICATOR
INDICATOR
INDICATOR
INDICATOR
BUTTON VOLUME KNOB TUNING AM FM CD FUNCTION STANDBY VOLUME TUNING KNOB FUNCTION SWITCH
(AM/FM/CD/BLUETOOTH) Control Location (RearView) FM ANT. AUX IN AC IN~
AUX IN JACK BATTERIES COMPARTMENT AC SOCKET 4 Power Connection Connecting AC Power Connect the small end of AC cord to the socket at the back of the main unit and insert the plug of AC cord into standard AC wall outlet. Caution:
The unit is designed to operate from mains supply of AC 120V~60Hz. If the plug of AC cord does not fit properly, try to turn it over and try again. Do not force it. When the unit is intended for being unused for along period of the time. Please press thebutton toturn off the unit and unplug the power cord from the AC wall outlet.AC FM ANT. AUX IN AC IN~
6 Battery Operation Before installing batteries (not included), ensure that the unit is disconnected from the mains supply. Remove the battery compartment cover on the bottom of the unit by sliding the battery cover with the opening direction indicated on the battery cover. Install 6 pieces of 1.5V (UM2) batteries (not included) by following the polarity markings and then replace the cover. For battery operation, unplug the AC cord from the AC wall outlet first and then remove the AC cord from the socket at the back of the main unit. 5 Caution:
There is a danger of explosion if batteries are replaced incorrectly. Replace batteries with the same type and same brand only. When the unit is intended for being unused for a long period of the time, press the Main Operation
button to turn OFFthe unit and remove all batteri esfrom the main unit Switching On for the first time Plug into AC power or install batteries by following instructions on the previous Power onnection section. The STANDBY indicator willl lit. Press the STANDBY button to turn on C the unit. The STANDBY indicator will be lighted off. To turn the unit off, press the STANDBY button again to turn the unit off. Switching between different sources (AM/FM/CD/BLUETOOTH) After turning on the unit, press and toggle FUNCTION switch to select different sound sources. Adjusting sound volume level After turning on the unit, turn the VOLUME knob to adjust the level of sound volume. Adjusting the rod antenna The aerial should be extended to ensure good reception in both FM radio modes. It may be necessary to adjust the position of the unit and /or aerial position to achieve the best signal reception. 6 CD Operation The unit is designed to play normal music CD disc bearing the correct identification logo. If the disc does not confirm tothe standard, it may not be played back properly. Caution:
Playback of CD-R / CD-RW may depend on recording conditions. Do not attach a seal or label to either side (the recordable side or the labeled side) of a CD-R/ RW disc. It may cause malfunction. Do not load a blank CD-R/ RW disc. It will take over 1 minute to read the disc. The disc may be damaged if you try to open the CD Door while reading the disc. CD-ROM, CD-I, CDV, VCD, DVD or computer CDs are not possible to be read. Loading disc 1. Press and toggle the FUNCTION button to switch to CD mode. 2. Press down the OPEN/CLOSE AREA on the CD door on the top of the unit to unlock and open the CD door. 3. Hold the CD disc by its edge with CD graphical side facing up and put it onto the CD compartment after the CD door is opened. Make sure that the disc label is facing up. 4. Close the CD door and make sure the VOLUME knob is not in minimum position. CD playback After loading the disc, the disc will begin spinning and the total number of the tracks on the disc will be shown on the display and the first track/file on the CD will be played back automatically. Remark:
If there is no disc in the unit, NO will be indicated on the display. If the CD cannot be read, NO will be indicated on the display. Play/Pause Control To pause playback temporarily by pressing the PLAY/PAUSE button. Music playback will be paused and the current elapsed track number will be shown on the display and the play icon will be blinking. Press the PLAY/PAUSE button again to resume playback. Stop playback To stop playback, press the STOP button on the unit. The total number of tracks of the disc will be displayed. Skip track During playback, press the forward or backward SKIP buttons to skip to the next or previous tracks. High-speed music search During playback, press and hold the forward or backward SKIP buttons to skip/search through the current track at high speed in forward or backward directions. When the SKIP buttons are released, normal playback speed will be resumed immediately. 7 CD Operation-Continued Repeat playback modes (Repeat 1 / Repeat all) Repeat the Current Track During playback, press the REPEAT button once to repeat the current CD track. Repeat All Tracks During playback, press the REPEAT button twice to repeat the entire album. Return to normal playback Press the REPEAT button until NO repeat indicator is displayed. The normal playback will be resumed. and blinking. Programmed CD playback This unit can be programmed to play up to 20 tracks in CD mode. Load the music CD disc onto the CD compartment (without pressing the PLAY/PAUSE button) 1. Press PROGRAM button once in the stop mode. P01 will be shown on the display 2. Press the SKIP buttons to select the desired track to be programmed. 3. Press PROGRAM button again to save the selected track/files. 4. Repeat steps 2-3 to program up to 20 tracks. 5. Press the PLAY/PAUSE button to play the programmed tracks after programming is 6. To clear program and resume normal playback, press the STOP button twice during playback, or open the CD door, or change to next mode to clear the programmed tracks. completed. The PROG indicator will lit. Remark:
The unit can store up to 20 tracks in the programmable memories. During the programmed playback, user can still select the repeat 1 / repeat all functions. 8 Bluetooth Operation 1. If the unit has never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link the SRCD1063BT with your Bluetooth device.
Press the POWER button to turn on the unit.
Press and toggle the FUNCTION button to select Bluetooth mode. The unit will search the paired device with the BLUETOOTH Indicator lit.
Press and hold the STOP/PAIR Button for 4~5 seconds. Then the BLUETOOTH Indicator is flashing, the unit will goes into Pairing/Discoverable mode.
Turn on the Bluetooth function of your Bluetooth device and enable the search or scan function to find the unit.
Select "SRCD1063BT " from required, enter the pass code 0000 to pair (link) the unit with your device.
After successfully pairing (linking) the Bluetooth enabled device the BLUETOOTH the device list when it appears on your device screen. If Indicator steadily and a short beep will heard. Note: If you cant pair the unit with your Bluetooth enabled device, you can try to turn Off &
On the power of your unit to solve the problem. Radio Operation The unit is designed to receive FM Stereo / FM and AM radio bands. 1. Switch and toggle the FUNCTION button on the top of the unit to switch to AM or FM mode. 2. Adjust the TUNING knob on the top of unit to tune the frequency of desired radio station. 3. To turn off the unit power, press the button to switch off the unit. Remark:
The unit has built-in AM ferrite bar antenna, which can provide adequate reception in most areas. If the AM reception is weak, try to adjust the location of the unit or relocate the unit to improve the reception. If the FM reception is weak, try to adjust the length and the angle of the FM antenna to improve the signal reception. 9 AUX IN Operation Setting up (AUX IN) connection AUX-IN jack will allow you to connect external music player or external sound source to the main unit. 1. Plug into a 3.5mm audio cable (not included) into your external music player and connect the other end (3.5mm jack) into the AUX IN jack on the top of the unit. 2. Make sure your external music player is turned on and start music playback on the music player 3. Adjust VOLUME knob to control the sound level of music playback from the speakers on the unit. Specifications Power Output. 1. watt RMS x2channels AC Power
. BatterySize . Radio Frequency. AC120V~60Hz UM- or -Size batteries x 6PCS FM: 87.5 108MHz , AM: 520- 1710 kHz 10