FCC ID: 2AB4KMETYH18B Portable Stereo Compact Disc Player with AM/FM Stereo Radio and Bluetooth

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE

WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN to alert lightning the user The flash with arrowhead symbol, within an equilateral triangle is intended the presence of uninsulated dangerous voltage within the product is enclosure that may be of sifficient magnitude to constitute a risk of electric shock to persons. to CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (ON BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. is the user The exclamation point within an intended triangle equilateral to alert the presence of to important operating and maintenance

(servicing) instructions in the literature accompanying the appliance. Caution marking is located at the bottom of the appliance. The rating plate is located at the bottom enclosure of the apparatus IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers Follow all instructions. instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for a long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. E-1 15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 19. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction. 20. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 21. Damage Requiring Service - Unplug this product from the wall outlet and refer If the product has been exposed to rain or water, servicing to qualified service personnel under the following conditions:

a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. 22. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 23. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. 24. Minimum distances of 5 cm around the apparatus for sufficient ventilation. 25. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. 26. No naked flame sources, such as lighted candles, should be placed on the apparatus. 27. The use of apparatus in moderate climates. 28. Attention should be drawn to the environmental aspects of battery disposal. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT. FULLY INSERT THE PLUG TO MAIN POWER SOCKET. SAVE THESE INSTRUCTIONS E-2

E-3 E-4 8 7 6 5 19 18 17 16 15 20

/AUX IN BBS 14 1 2 3 4 9 10 11 12 13 21 22 23 E-5 E-6 PLEASE READ THIS IMPORTANT INFORMATION:

CD mechanisms used in devices like this are designed to fully read all commercial CDs. They will also read self-compiled CD-RWs but it may take up to 10 seconds for playback to start. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or the compatibility of the CD compilation software. Manufacturer is not responsible for the playback quality of CD-R/RW discs. Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction. E-7 E-8 AUX IN OPERATION

E-9 E-10 E-11 E-12 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Spectra Merchandising International, Inc. is under license. Other trademarks and trade names are those of their respective owners.

E-13 0419 Printed in China

(CD-560C) E-14

LABEL 2AB4KMETYH18B C 2AB4KMETYH18B C 4010206 Manufactured: June 2019 S/N:20190610001 Manufactured: June 2019 S/N:20190614312 25mm 18mm

MET INDUSTRIAL LTD Federal Authorization Communications and Evaluation Commission Division Confidentiality Request regard FCC ID: 2AB4KMETYH18B ing applicatio n fo cetification of Pursuant treatment to Sections of information accompanying this application as outlined below:

0.457 and 0.459 of the Commission s Rules, we hereby request confidential Exhibit Type Block Diagram, Description

, File Name Schematics, Operational Block Diagram Operation schematic Description diagram The above materials the public. unjustified benefits contain to its competitors. trade secrets and proprietary information to not customarily The public disclosure of these materials may be hmfulto the applicant released and provide Sincerely

, TONY LAM MET INDUSTRIAL LTD Rev 11/20/07

Date: 2021-6-1 LTD MET INDUSTRIAL To: Federal Communications Mills Road 7435 Oakland Columbia, MD Commission FCC ID: 2AB4KMETYH18B To Whom It May Concern:

LTD This letter is to ascetain that MET INDUSTRIAL EUT: Portable Stereo Compact Disc Player with AM/FM Stereo Radio and Bluetooth MODEL No.: MET-188 by five characters(where Character Standard CD-5608, CD-560C CD-560D and CD-560 followed in the ASCII printable variances in cosmetics O buyes). characters the 5 characters denote any Table to represent CD-560A, Has been the units used for conducting FCC compliance testing, the SDoC part will be tested by EMTEK (SHENZHEN) CO., LTD. If you have any question or concerns, pls. contact us. Sincerely, Client s signature

s neI title Client Contact Street, Lai

: TONY LAM I address:

Chi Kok, Kowloon, information MET INDUSTRIAL Hong Kong LTD I Room 605, 6/F., No. 9 Wing Hong

Declaration on model difference We the undersigned numbers are identical differences hereby cnfirmthat any of our production and electrical, in circuitry are the model name and the color of appearance for trading mechanical the following model cnstruction;

the only purpose. and physical units bearing FCC ID: 2AB4KMETYH18 name Trade name Production Model no. Portable Disc PlayewithAM/FM SteeoCompact MET, JENSEN MET-18BT, CD-560A, and CD-560 followed CD-560C, CD-5600 by five characters CD-5608, Stereo Radio and Bluetooth

(wheethe 5 characte Sdenote any pintable characters in the ASCStandard Character vaiancesin cosmetics ableto represent Obuyers). Confirmed by MET INDUSTRIAL LTD TONY LAM MET INDUSTRIAL Date: 2021-61 LTD

LTD hETINDUSTRIAL Communications Federal Authorization 1435 Oakland Columbia, MD 21046 and Evaluation Mills Road Commission Division Date: 2021-6-1 SUBJECT:

To Whom It May Concern:

FCC Application for FCC ID: 2AB4KMETYH18B hereby We, the undersigned, our behalf, and all acts carried same effect as acts of our own. to apply to the Federal authorize Communications Lisa Wang at EMTEK (SHENZHEN) CO.LTD.on Any on our equipment. Commission CO.LTD.on our behalf shall have the out by EMTEK (SHENZHEN) that we are in full compliance This is to advise applicant, Anti-Drug of federal are not subject Act of 1988, 21 USC853a, pursuant benefits to a denial of federal to that section. with the Anti-Drug Abuse Act. We, the 5301 of the benefits pursuant to Section and no payto the application is subject to a denial Regards, TONY LAM MET INDUSTRIAL LTD