FCC ID: P3ODEF3 Motorcycle Alarm

EN User Manual Manuel Utilisateur FR Part Number 61912035000 USER MANUAL EN Dear Customer, the DEFCOM 3.2B alarm allows it to be installed on your vehicle quickly and in compliance with current regulations. The DEFCOM 3.2B device has possibility to be paired with a CARD B9.5 as ad ditionally accessory but it is mainly used with a smartphone APP whose functions are described in the manual available online and downloadable from the App menu. For a correct management of the product through the App we suggest to apply here the white self-adhesive label that seals the alarm control unit package. Keep these indications in a safe place, they will be useful for product updates and optional acces sories. OVERRIDE EMERGENCY CODE We suggest to write in this space the customized Password used to pair the smartphone in order to use it if you have to pair another smartphone to the same product. Password:

The usage of the mobile APP for arming/disarming the product temporarily excludes the functioning of the CARD B9.5 if it has been bought separately and has been memorized in a second time. SAFETY WARNINGS The graphic symbols placed on the equipment indicate that the specific information in this manual must be observed. The symbols are used to safe guard the health of users against the danger that the materials inside the product may cause. WARNING! DANGER OF EXPLOSION IF BATTERY IS REPLACED WITH A DIFFERENT OR UNSUITABLE TYPE. USED BATTERIES MUST BE DISPOSED OF IN ACCORDANCE WITH THE DESIGNATED DISPOSAL INSTRUCTIONS. Do not swallow the battery: danger of chemical burns. This product contains a coin/button cell battery. Swallowing coin/button cell batteries can cause severe internal burns and lead to death within 2 hours. Keep new and used batteries out of the reach of children. Stop the use of the product and keep it out of the reach of children if the battery compartment does not close completely. Seek immediate medical attention if battery ingestion is suspected. 2 KTM | DEFCOM 3.2B User Manual 1. FIRST ACTIVATION AFTER VEHICLE CONNECTION 1. To activate the device, after battery connection, turn ON and OFF the vehicle instru ment panel. 2. The alarm unit emits 2 BEEP + 2 BOOP and LED start flashing quickly, within 1 minute activate the instrument panel, the alarm unit emits 2 BEEP + 2 BOOP again and activa tion will be completed; if the instrument panel activation dont occur within 1 minute the activation will be automatically and the alarm unit emits 2 BEEP + 2 BOOP to advise about it. NOTE: Whenever the vehicle battery will be connect (for example after disconnecting it for winter period or maintenance) to activate the device, repeat steps 1 and 2 above. 2. CARD B9.5 ACTIVATION ( OPTIONAL) The CARD B9.5 is not supplied in the package but is an option. To activate it please follow the specific procedure for add a card as in chapter 17. After a new Card B9.5 has been paired, to activate it, press its button for five times. 3. AUTOMATIC ARMING After turned OFF the vehicle instrument panel the alarm unit will be ready to arming, the com plete arming will happen 20 second after moved the Smartphone APP or the CARD B9.5 (op tional) out of the detection range, ar ming is signaled by a 2 BEEP sounds, 2 flashes of direction indicators and a quick flashing of the LED to indicate start of immunity time during that is pos sible check all the protection without triggering an alarm sounding (see chapter 6. IMMUNITY TIME). After immunity time all the alarm protections will be ready to produce an alarm trigger and the LED will flash slowly. 4. ARMING BY THE CARD B9.5 BUTTON (OPTIONAL) Press briefly the CARD B9.5 button close to the vehicle. Releasing button the alarm unit will arming and it will be signaled by 2 BEEP sounds, 2 flashes of direction indicators and a quick flashing of the LED to indicate start of immunity time during that is possible check all the pro tection without triggering an alarm sounding (see chapter 6. IMMUNITY TIME). After immu nity time all the alarm protections will be ready to produce an alarm trigger and the LED will flash slowly. 5. ARMING WITHOUT ACTIVATING THE INTERNAL MOVEMENT SENSOR The disarming of the sensor can be obtained by using the specific function in the APP menu or by press hold the CARD B9.5 button (if paired) for 6 seconds close to the vehicle. Once ac tivated by app or by releasing button on the CARD B9.5 the alarm unit will arming and it will be signaled by 2 BEEP+1BEEP sounds, 2+1 flashes of direction indi cators and a quick flashing of the LED to indicate start of immunity time during that is possi ble check all the protection without triggering an alarm sounding (see chapter 6. IMMUNITY TIME). After immunity time all the alarm protections will be ready to produce an alarm trigger and the LED will flash slowly. 6. IMMUNITY TIME During the first 26 seconds after the alarm arming, the LED flashing quickly to indicate that it is possible to test the protection functions of the system. Every alarm triggers doesnt produce an alarm sounding but just a BEEP sounds by the siren and the reset of initial immunity time that restarts again. When immunity time is over, the LED flashes normally and every alarm triggers will produce an alarm sounding. 3 KTM | DEFCOM 3.2B User Manual 7. ACTIVE PHASE This is when the alarm system is armed and after the initial immunity phase is over. Any alarm triggers will produce an alarm cycle that lasts 26 seconds: the direction indicators flash, the siren emits a distinctive modulated sound, and it will be impossible to start the en gine. 8. PROTECTION BY THE ALARM SYSTEM The alarm central unit protects the motorcycle against being started and an alarm cycle will be triggered every time:

The ignition key is turned ON An attempt is made to remove or move any part of the motorcycle which is protected by specific switches (for example if the seat or the storage compartment is opened...) The motorcycle is moved The alarm systems supply cables are disconnected or cut or if the motorcycles battery is disconnected. 9. DISARMING Coming back to the vehicle with Smartphone APP or with CARD B9.5 ( optional) the alarm unit recognize the Id Tag and turns off the LED to indicate that is ready to be disarmed turning ON the vehicle instrument panel. Turning ON the vehicle instrument panel the disarming is signaled by a 1 BEEP sound and 1 flash of the direction indicators. If the siren also emits a BOOP sound, this means that the alarm system was triggered. To find out how the alarm was triggered, consult the 10. ALARM MEMORY table. If visual and acoustic signals are given during arming or disarming that are different to those described above, consult the chapter 11. NOTIFICATION to find out what they mean. 10. ALARM MEMORY If various alarms have been triggered during your absence the ALARM MEMORY will signal them on the LED emitting a sequences of flashing with 3 seconds pauses between the sequen ces and will repeat the series of sequences every 6 seconds. The ALARM MEMORY is reset when the alarm system is armed with Smartphone APP or the CARD B9.5 (optional) again or when the vehicle instrument panel is ON but the alarms memo ry stay available for 1 minute also after instrument panel activation. ALARM MEMORY LED SIGNALS Internal movement sensor Contacts Ignition key sensing Tampering with cables or battery 1 Flash 2 Flashes 3 Flashes 4 Flashes 4 KTM | DEFCOM 3.2B User Manual 11. NOTIFICATIONS The DEFCOM 3.2B alarm provides different signals (led, siren and flashing of the vehicle in dicators) according to the different commands received and different conditions which it is, following are reported the main signals. CENTRAL UNIT STATUS LED DIRECTION INDICATORS SIREN Arming by CARD B9.5 Slow flashing 2 Flashes 2 BEEP Arming without movement sensor by CARD B9.5 Arming with active contact Slow flashing Flashes 2 + 1 2 BEEP + 1 BEEP Slow flashing 2 Flashes 2 BEEP + 1 BOOP Initial immunity phase Fast flashing Prealarm phase with ignition key ON or movement sensor activation Switches off 5 BEEP Alarm cycle (25 sec) Switches off Flashing Sounds Disarming by CARD B9.5 or Override Code Switches off 1 Flash 1 BEEP Disarming when alarms have been memorised Switches off briefly every 6 sec. Disarming when the motorcycles battery is flat Switches off CARD B9.5 low battery warning after disarming 10 flashes after ignition key ON SERVICE MODE activated Flashing very fast with ignition key ON 1 BEEP + 1 BOOP 4 BEEP 12. BUZZER ARMING/DISARMING DISABLE To deactivate the Arming/Disarming Buzzer, it is necessary to contact an installation center equipped with the PRG007 Programmer or use the smartphone App. 13. SERVICE MODE If needs excluding the alarm system for a time period, its possible enable the SERVICE MODE modality using Smarphone APP or the CARD B9.5 (optional). To enable the SERVICE MODE the function can be selected by the Smartphone APP Menu or by turn ON the motorcycles key and immediately after press hold the CARD B9.5 button (

optional) at least 6 seconds, the feature enabling is indicated by the LED flashing very fast when the motorcycles key is ON. To disable the SERVICE MODE the function can be selected by the Smartphone APP Menu or by turn ON the motorcycles key and immediately after press hold the CARD B9.5 button

(optional) at least 6 seconds, the feature disabling is indicated by the LED goes OFF. 5 KTM | DEFCOM 3.2B User Manual 14. SYSTEM TO PREVENT VEHICLE BATTERY DISCHARGE This product has one timed operation to protect the vehicle battery (STOP MODE) and an addi tional system to fast shut off if the battery voltage level goes down than 10,5V. 15. STOP MODE The alarm system automatically switches off in order to limit the consumption of current in the motorcycles battery, automatically excluding the alarm functions but maintaining the immo bilization of the engine: in this condition current consumption is nil. STOP MODE is activated 5 days after the system was armed last time if no alarms were trigge red in this time or if the motorcycles battery is almost flat (battery voltage level under 10,5V). To exit from STOP MODE, please select the specific function on mobile APP or turn the igni tion key ON: the siren will emit a series of BEEP sounds; Press the CARD B9.5 button (optional) within 20 seconds to disarm the alarm system. If the CARD B9.5 is not paried or its button is not pressed within 20 seconds, an alarm cycle for ignition key sen sing will be triggered. 16. OVERRIDE EMERGENCY CODE (PIN CODE) If the Smartphone or the CARD B9.5 (optional) is lost, stolen or damaged, it is possible to disarm the alarm system with a 5 digit emergency code called the OVERRIDE CODE and this code is found on the label applied on the alarm central unit body and is isnt changeable. Remove the label from the alarm unit body and keep it with you to be used if you needs it; keep the OVERRIDE CODE in a safe place and not with the motorcycle. The procedure is operational only after the initial immunity phase is over, and if the alarm fun ctions are operational, alarm cycles will be triggered while the override code is inserted. Perform the following procedure. With armed alarm system activate the instrument panel and immediately deactivate it; the LED will turn ON, turn off and then start to flash after 2 seconds. OVERRIDE EMERGENCY CODE ALARM IN ACTIVE PHASE

(AFTER 26 SEC.)

( WITHIN 2 SEC. ) WITHIN 10 SEC. WITHIN 10 SEC. WITHIN 10 SEC. WITHIN 10 SEC. x1

. C E S 2 x3 I K C U Q 3 S E H S A L F M R I F N O C x2 I K C U Q 3 S E H S A L F M R I F N O C x1 I K C U Q 3 S E H S A L F M R I F N O C x2 DISARM OK WARNING: If 3 attempts to insert the wrong code are detected, the central unit will be blocked for 10 minutes in order to prevent attempts to search for the code. 6 KTM | DEFCOM 3.2B User Manual 17. PAIRING OR ADD NEW CARDS B9.5 The control unit is not supplied with paired with 2 B9.5 CARDs from Factory. To add other B9.5 CARDs or exclude it from the control unit memory it is necessary to contact an installation cen ter equipped with the PRG007 Programmer or use the Smartphone App. 18. SPECIFICATIONS Power supply .......................................................................................................12Vcc (10V15V) Consumption .........................................................................................................................2,1 mA Consumption in STOP MODE ........................................................................................ 0,02 mA Operating temperature .......................................................................................... 25C + 85C Sound level of siren ................................................................................................(1 mt.) 114 dB Selfsupply autonomy ...................................................................................................5 minutes Sensitivity of internal movement sensor .....................................................1,5 per second Frequency of Mycro remote control .....................................................................433.92 MHz Frequency of CARD B9.5 .................................................................................................2.45 GHz EMERGENCY OVERRIDE CODE to reset immobilizer and alarm functions Note: for USA and Canada the receiver at 433.9 MHz is powered OFF and it is inhibited. 19. CAPACTITY OF CONTROLS Starter motor relay ......................................................................................................................10A Direction indicator relay ....................................................................................................5A + 5A Horn control .....................................................................................Negative electronic 300mA 20. TIMING Initial immunity phase ...............................................................................................26 seconds Duration of alarm cycle ...............................................................................................26 seconds Interval between alarm cycles .....................................................................................5 seconds Passive arming delay ...................................................................................................20 seconds STOP MODE delay ...................................................................................................................5 days Intermittence of direction indicators ................................................0,4 sec. Off/0,4 sec. On 21. ALARM CYCLES Contact alarm inputs ........................................................................................................10 cycles Tilt sensor .............................................................................................................................10 cycles Ignition sensing .................................................................................................................10 cycles Cable tampering ..................................................................................................................9 cycles 22. FCC STATEMENT AND IC NOTICE FCC USA STATEMENT OF AGENCY COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any change or modification to the product not expressly approved by Meta System could void the users authority to operate the device. 7 KTM | DEFCOM 3.2B User Manual FCC CLASS B COMPLIANCE STATEMENT The user is cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio or television technician for help. To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. IC CANADA IC CANADA NOTICE This device contains licenceexempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licenceexempt RSS(s). Operation is subject to the following conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. 3. A separation distance of at least 20 cm must be maintained between the antenna of this device and all persons to comply with the safety requirements for mobile RF exposure conditions in accordance with RSS102 Issue 4. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. FREQUENCY BAND USED: 24002483,5 MHz MAXIMUM OUTPUT POWER: < 20 dBm for Bluetooth 8 KTM | DEFCOM 3.2B User Manual MANUEL DUTILISATION FR Cher client, Lalarme DEFCOM 3.2B permet dtre installe sur votre vhicule rapidement et en conformit avec les rglementations en vigueur. Le dispositif DEFCOM 3.2B a la possibilit dtre coupl avec une CARD B9.5 comme accessoire supplmentaire mais il est principalement utilis avec une APP pour smartphone dont les fonctions sont dcrites dans le manuel disponible en ligne et tlchar geable partir du menu de lApp. Pour une gestion correcte du produit travers lapplication, nous suggrons dappliquer ici ltiquette blanche autocollante qui scelle lemballage de la centrale dalarme. Conservez ces indications dans un endroit sr, elles seront utiles pour les mises jour du produit et les accessoires optionnels. CODE DURGENCE OVERRIDE Nous conseillons dcrire dans cet espace le mot de passe personnalis dassociation au smartphone utiliser si lon souhaite associer un smartphone sup plmentaire au produit. Mot de passe personnalis:

Lutilisation de lAPP mobile pour armer/dsarmer le produit exclut temporai rement le fonctionnement de la CARD B9.5 si elle a t achete sparment et a t mmorise une seconde fois. CONSIGNES DE SCURIT Les symboles graphiques apposs sur le dispositif indiquent quil faut sui vre les informations spcifiques figurant dans ce manuel. Ils indiquent le danger que les matriaux utiliss lintrieur du produit sont susceptibles de provoquer et ils sont utiliss dans le but de protger la sant de tous les utilisateurs. ATTENTION ! RISQUE DEXPLOSION SI LA PILE EST REMPLACE PAR UN TYPE INCORRECT DE PILE. LIMINER LES PILES USES EN SUIVANT LES INSTRUCTIONS SPCIFIQUES DDIES LLIMINATION. Ne pas avaler la pile, risque de brlure chimique. Ce produit contient une pile bouton en forme de pice de monnaie. Si elle est avale, la pile bouton en forme de pice de monnaie risque de causer de graves brlures internes en 2 heures seulement et de provoquer la mort. Garder les piles neuves et uses hors de porte des enfants. Si le logement des piles ne ferme pas solidement, suspendre lutilisation du produit et le ranger hors de porte des enfants. En cas dingestion prsume de piles, sadresser immdiatement un mdecin. 9 Manuel Utilisateur KTM | DEFCOM 3.2B 1. PREMIRE ACTIVATION APRS LE BRANCHEMENT AU VHICULE 1. Pour activer le dispositif, aprs avoir rebranch la batterie du vhicule, activer et dsactiver le combin de bord. 2. Lunit antivol met 2 BEEP + 2 BOOP et le voyant commence clignoter rapidement. Ensuite, dans la minute qui suit, activer nouveau le combin de bord, lunit antivol met nouveau 2 BEEP + 2 BOOP et lactivation est termine. Si le combin de bord nest pas activ dans la minute qui suit, lexpiration de ce laps de temps, lactivation aura lieu automatiquement et elle sera signale par 2 BEEP + 2 BOOP.. REMARQUE: chaque branchement de la batterie du vhicule (par exemple aprs lavoir dbran-

che pour lhiver ou pour des oprations dentretien), pour ractiver le dispositif, il faut rpter les points 1 et 2 illustrs ci-dessus. 2. ACTIVATION DE LA CARD B9.5 La CARTE B9.5 nest pas fournie dans lemballage mais est une option. Pour lactiver, veuillez suivre la procdure spcifique dajout dune carte dcrite au chapitre 17. Aprs avoir appari une nouvelle carte B9.5, pour lactiver, appuyez cinq fois sur son bouton. 3. ENCLENCHEMENT AUTOMATIQUE Aprs avoir teint le tableau de bord du vhicule, lunit dalarme sera prte sarmer, larme ment complet se produira 20 secondes aprs avoir dplac le Smartphone APP ou la CARD B9.5 (en option) hors de la zone de dtection, larmement est signal par 2 BIP, 2 clignotements des indicateurs de direction et un clignotement rapide de la LED pour indiquer le dbut du tem ps dimmunit pendant lequel il est possible de vrifier toutes les protections sans dclencher une alarme (voir le chapitre 6. TEMPS DIMMUNIT). Aprs le temps dimmunit, toutes les protections dalarme seront prtes produire un dclenchement dalarme et la LED clignotera lentement. 4. ENCLENCHEMENT LAIDE DU BOUTON DE LA CARD B9.5 (OPTIONEL) Appuyer brivement sur la touche de la CARD B9.5 proximit du vhicule. Au relchement du bouton, lantivol senclenchera en mettant 2 BEEP, les clignotants effectueront 2 clignotements et le voyant clignotera rapidement pour indiquer le dbut de la priode dimmunit initiale au cours de laquelle il est possible de vrifier lefficacit des protections sans provoquer une alarme (voir chapitre 6. IMMUNIT INITIALE ). la fin de la priode dimmunit, toutes les fonctions de lunit seront actives et le voyant clignotera. 5. ENCLENCHEMENT SANS CAPTEUR DE DPLACEMENT Le dclenchement du dtecteur peut tre obtenu en utilisant la fonction spcifique dans le menu APP ou en appuyant sur le bouton de la CARD B9.5 (si jumel) pendant 6 secondes pro ximit du vhicule. Une fois active par lapplication ou en relchant le bouton de la CARD B9.5, la centrale dalarme sarme et est signale par 2 BEEP+1BEEP, 2+1 clignotements des indicateurs de direction et un clignotement rapide de la LED pour indiquer le dbut du temps dimmunit pendant lequel il est possible de vrifier toutes les protections sans dclencher dalarme (voir chapitre 6. TEMPS DIMMUNIT). Aprs le temps dimmunit, toutes les protections dalarme seront prtes produire un dclenchement dalarme et la LED clignotera lentement. 6. IMMUNIT INITIALE Lors des 26 premires secondes partir de lenclenchement de lunit, le voyant clignote rapide ment pour signaler quil est possible de tester les protections de lalarme. Les excitations ventuelles dalarme ne provoquent pas dalarmes, mais seulement des BEEP de la sirne et la priode dimmunit initiale repartira de zro. la fin de la priode dimmunit, toutes les fonctions de lunit seront actives et le voyant clignotera. 10 Manuel Utilisateur KTM | DEFCOM 3.2B 7. PHASE ACTIVE Cestdire lunit enclenche, une fois la priode dimmunit initiale termine. Les excitations ventuelles dalarme provoquent un cycle dalarme dune dure de 26 secondes:

les clignotants clignotent, la sirne met un sono modul caractristique et il sera impossible de faire dmarrer le moteur. 8. PROTECTIONS DALARME Lunit dalarme protgera la moto contre toute tentative de dmarrage et un cycle dalarme sera lanc chaque fois que :

la cl de contact de la moto sera tourne sur la position ON ;

on essaiera denlever ou de dplacer une pice de la moto protge par des contacts spcifiques (par exemple, ouverture de la sella, compartiment de rangement, etc.) ;

la moto sera dplace ;

les cbles dalimentation de lunit dalarme sont dbranchs/coups ou si la batterie de la moto est dbranche. 9. DSENCLENCHEMENT En revenant au vhicule avec lapplication Smartphone ou avec la carte B9.5 (en option), lu nit dalarme reconnat le badge didentification et teint la LED pour indiquer quelle est prte tre dsarme en allumant le tableau de bord du vhicule. En allumant le tableau de bord du vhicule, le dsarmement est signal par un BIP sonore et un clignotement des indicateurs de direction. Si la sirne met galement un BOOP, cela signifie que le systme dalarme a t dclench. Pour savoir comment lalarme a t dclenche, consultez le tableau 10. MMOIRE DALARME. Si, lors de larmement ou du dsarmement, des signaux visuels et sonores diffrents de ceux dcrits cidessus sont mis, consultez le chapitre 11. NOTIFICATION pour en connatre la si gnification. 10. MMOIRE DALARME Si plusieurs alarmes ont t dclenches pendant votre absence, la MEMOIRE DALARME les signalera sur la LED en mettant une squence de clignotements avec des pauses de 3 secondes entre les squences et rptera la srie de squences toutes les 6 secondes. La MEMOIRE DALARME est rinitialise lorsque le systme dalarme est arm nouveau avec lAPP Smartphone ou la CARD B9.5 (en option) ou lorsque le tableau de bord du vhicule est allum, mais la mmoire des alarmes reste disponible pendant 1 minute mme aprs lactiva tion du tableau de bord. CAUSE DE LA MMOIRE DALARME INDICATIONS DU VOYANT Capteur de dplacement interne 1 clignotement Contacts Capteur cl de contact 2 clignotements 3 clignotements Coupure des cbles ou dbranchement de la batterie 4 clignotements 11 Manuel Utilisateur KTM | DEFCOM 3.2B 11. SIGNALISATIONS Lalarme DEFCOM 3.2B fournit diffrentes signalisations (voyant, sirne et clignotements des clignotants du vhicule) en fonction des diffrentes commandes reues et des diffrents tats dans lesquels elle se trouve. Nous indiquons cidessous les principales signalisations. TAT DE LUNIT VOYANT CLIGNOTANTS SIRNE Enclenchement par la CARD B9.5 Enclenchement sans capteur de dplacement par la CARD B9.5 Unit enclenche avec un contact activ Clignotement lent 2 clignotements 2 BEEP Clignotement lent Clignotements 2 + 1 2 BEEP + 1 BEEP Clignotement lent 2 clignotements 2 BEEP + 1 BOOP Immunit initiale Clignotement rapide Pralarme en cas de combin ON ou dactivation du CAPTEUR DE DPLACEMENT Cycle dalarme (25 s) Dsenclenchement par la CARD B9.5 ou par le CODE OVERRIDE teint teint teint Unit dsenclenche avec MMOIRE DALARME Brves extinctions tous les 6 secondes Avertissement batterie du vhicule dcharge au dsen clenchement Avertissement pile de la CARD B9.5 dcharge au dsenclen chement SERVICE MODE activ teint 10 clignotements lactiva tion du combin de bord Clignote rapidement avec le combin de bord activ 5 BEEP Clignotants Signal sonore 1 clignotement 1 BEEP 1 BEEP + 1 BOOP 4 BEEP 12. DSACTIVATION DU BUZZER ARMING/DISARMING Pour dsactiver le Buzzer pendant lArming/Disarming, il faut sadresser un centre dinstalla tion quip dun Programmateur PRG007 ou utiliser lAppli pour smartphone. 13. SERVICE MODE Sil est ncessaire dexclure le systme dalarme pour une priode de temps, il est possible dac tiver la modalit SERVICE MODE en utilisant le Smartphone APP ou la CARD B9.5 (en option). Pour activer le MODE SERVICE, la fonction peut tre slectionne par le menu du Smartphone APP ou en allumant la cl de la moto et immdiatement aprs avoir appuy sur le bouton de la CARD B9.5 (en option) pendant au moins 6 secondes, lactivation de la fonction est indique par le clignotement trs rapide de la LED lorsque la cl de la moto est allume. Pour dsacti ver le MODE SERVICE, la fonction peut tre slectionne par le Menu APP du Smartphone ou en allumant la cl de la moto et immdiatement aprs avoir appuy sur le bouton CARD B9.5 (optionnel) pendant au moins 6 secondes, la dsactivation de la fonction est indique par lextinction de la LED. 12 Manuel Utilisateur KTM | DEFCOM 3.2B 14. SYSTME DE PROTECTION DE LA BATTERIE DU VHICULE Le produit a un mode de fonctionnement temporis prvu pour protger la batterie du vhicu le (STOP MODE) et un systme supplmentaire dextinction rapide si la tension de la batterie descend sous les 10,5 V. 15. STOP MODE Le systme dalarme steint automatiquement afin de limiter la consommation de courant dans la batterie de la moto, en excluant automatiquement les fonctions dalarme mais en main tenant limmobilisation du moteur : dans cette condition, la consommation de courant est nul le. Le MODE STOP est activ 5 jours aprs le dernier armement du systme si aucune alarme na t dclenche pendant cette priode ou si la batterie de la moto est presque dcharge

(niveau de tension de la batterie infrieur 10,5 V). Pour sortir du MODE STOP, slectionner la fonction spcifique sur lAPP mobile ou mettre le contact : la sirne met une srie de BIP ;

appuyer sur le bouton CARD B9.5 (optionnel) dans les 20 secondes pour dsarmer le systme dalarme. Si la CARD B9.5 nest pas appose ou si son bouton nest pas press dans les 20 secon-

des, un cycle dalarme pour la dtection de la cl de contact sera dclench. 16. CODE DURGENCE OVERRIDE (PIN CODE) En cas de perte, de vol ou dendommagement du Smartphone ou de la CARD B9.5 (en option), il est possible de dsarmer le systme dalarme laide dun code durgence 5 chiffres appel CODE OVERRIDE. Ce code se trouve sur ltiquette appose sur le corps de la centrale dalar me et nest pas modifiable. Retirez ltiquette du corps de la centrale dalarme et gardezla avec vous pour lutiliser si vous en avez besoin ; gardez le CODE OVERRIDE dans un endroit sr et pas avec la moto. La procdure nest oprationnelle quaprs la phase dimmunit initiale, et si les fonctions dalarme sont oprationnelles, les cycles dalarme seront dclenchs pendant que le code de neutralisation est insr. Effectuez la procdure suivante. Lorsque le systme dalarme est arm, activez le tableau de bord et dsactivezle immdiatement ; la LED sallume, steint et commence clignoter aprs 2 secondes. CODE D'URGENCE OVERRIDE ALARME ACTIVE

(APRS 26 SEC.)

( DANS LES 2 SEC. ) DANS LES 10 SEC. DANS LES 10 SEC. DANS LES 10 SEC. DANS LES 10 SEC. x1

. C E S 2 x3 E M R I F N O C H S A L F 3 R A P I S E D P A R x2 E M R I F N O C H S A L F 3 R A P I S E D P A R x1 E M R I F N O C H S A L F 3 R A P I S E D P A R x2 DSACTIV OK ATTENTION : aprs 3 saisies errones du code, lunit se bloque pendant 10 minutes afin dempcher toute tentative de recherche du code en question. 13 Manuel Utilisateur KTM | DEFCOM 3.2B 17. CARD B9.5 SUPPLMENTAIRES Lunit de contrle nest pas fournie dusine avec 2 cartes B9.5. Pour ajouter dautres cartes B9.5 ou les exclure de la mmoire de lunit de contrle, il est ncessaire de contacter un centre dinstallation quip du Programmateur PRG007 ou dutiliser lapplication smartphone. 18. CARACTRISTIQUES TECHNIQUES Alimentation .........................................................................................................12Vcc (10V15V) Absorption ...............................................................................................................................2,1 mA Absorption en STOP MODE .............................................................................................. 0,02 mA Temprature de fonctionnement ......................................................................... 25C + 85C Niveau sonore de la sirne ....................................................................................(1 m.) 114 dB Autonomie dautoalimentation .........................................................................................5 min. Sensibilit capteur de dplacement interne ............................................1,5 par seconde Frquence radiocommandes Mycro ......................................................................433.92 MHz Frquence CARD B9.5 .......................................................................................................2.45 GHz CODICE OVERRIDE durgence pour le rarmement du bloc moteur et la dsactiva tion des fonctions dalarme Note : pour les USA et le Canada, le rcepteur 433,9 MHz est mis hors tension et il est inhib. 19. PORTE DES COMMANDES Relais du dmarreur ...................................................................................................................10A Clignotants .............................................................................................................................5A + 5A Commande du relais du klaxon ..........................................Ngative lectronique 300 mA 20. TEMPORISATIONS Priode dimmunit initiale .....................................................................................26 secondes Dure du cycle dalarme ...........................................................................................26 secondes Intervalle entre les cycles dalarme ..........................................................................5 secondes Retard dautoenclenchement ...............................................................................20 secondes Retard de STOP MODE ...........................................................................................................5 jours Intermittence clignotants en alarme ..........................................0,4 s teints/0,4 s allums 21. CYCLES DALARME Entres alarme contacts .................................................................................................10 cycles Capteur de dplacement ................................................................................................10 cycles Capteur cl de contact ....................................................................................................10 cycles Coupure des cbles .............................................................................................................9 cycles 22. FCC STATEMENT AND IC NOTICE FCC USA STATEMENT OF AGENCY COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any change or modification to the product not expressly approved by Meta System could void the users authority to operate the device. 14 Manuel Utilisateur KTM | DEFCOM 3.2B FCC CLASS B COMPLIANCE STATEMENT The user is cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio or television technician for help. To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. IC CANADA IC CANADA NOTICE Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 3. Une distance de sparation dau moins 20 cm doit tre maintenue entre lantenne de cet appareil et toutes les personnes afin de respecter les exigences de scurit relatives lexposition aux RF dans des conditions dutilisation mobile, conformment la norme RSS102 Version 5. FREQUENCY BAND USED: 24002483,5 MHz MAXIMUM OUTPUT POWER: < 20 dBm for Bluetooth 15 Manuel Utilisateur KTM | DEFCOM 3.2B SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Meta System S.p.A. declares that MotorBike Alarm types DEFCOM 3.2B, ID-TAG type B9.5 and Remote control type Mykro are in compliance with Radio Equipment Directive 2014/53/EU. Frequency Bands in which the radio equipment operates:

433.05 MHz 434.79 MHz <10mW e.i.r.p. 2402.0 MHz 2480.0 MHz <10mW e.i.r.p. The full text of the EU Declaration of Conformity is available at the following internet address: https://docs.metasystem.it/

Certificate Holders Address:

Meta System S.p.A. - Via Galimberti 5, 42124 Reggio Emilia (Italy) www.metasystemcorporation.com KTM Sportmotorcycle AG Stallhofnerstrae 3 A-5230 Mattighofen www.ktm.at

. d e v r e s e r s t h g i r l l A

. A p S m e t s y S a t e M t h g i r y p o C

DEFCOM 3.2B_ METS SELF POWERED M MOTORBIKEALARM Mga FCC ID:P30DEF3 10:4429A-DEF3 6024720 C UK UK HVIN : A3011326 www. a it <

Max 6,5A XX (Ex) (Ex) on 06 3119 Ve? 22 9eFer es? 5030650800

Automotive Electronic Design E-MOBILITY | TELEMATICS | SECURITY ET SYSTEM:

Authority to Act as Agent Date: gennaio 22, 2024 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

PRSLAB/Riccardo Pfeiffer is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: 31 January 2025 By: Maldini Giorgio

(Print name) Title: Manager of Founded Projects On behalf of: _ Meta SystemS.p.A.

(Company Name) Telephone: +393498407266 1. Must be signed by applicant contact given for applicant on the FCC sile, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. AN Te Meta System S.p.A. - Share Capital 27.157.643,00 iv, - VAT Number and Fiscal Code 00271730350 - R.E.A. Number 120639 MET A Via T. Galimberti, - 42124 Reggio Emitia [Ilaly] - Tel. +39 0522 364111 - Fax +39 0522 364150 SYSTEM Subject to management and co-ordination of Shenzhen Deren Electronic CO., LTD company. infofametasysiem.it - www.metasystenit

cP ) MEWA Automotive Electronic Design E-MOBILITY | TELEMA SYSTEM:

RITY Request_for Confidentialii Date: marzo 14, 2022 Subject: Confidentiality Request for: __ P3ODEF3 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term X] Permanent Block Diagrams Short Term External Photos Short Term Permanent *! Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent ** Users Manual Meta System S.p.A. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. |

Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___0___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: /Founded Projects __Mr. Maldini Giorgio _

(Signatijre/Title?)

'_ The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D0O1 found at:

https://apps.fec. gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section IL, 3) regarding specific information that must accompany these requests.

? - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Meta System S.p.A. - Share Ca is iv. - VAT Number and Fiscal Code 00271730350 - R.E.A. Number 120639 Via T. Galimberti, 5 - 42124 Reggio Emilia (Italy) - Tel. +39 0522 364111 - Fax +39 0522 364150 S Subject to management and co-ordination of Shenzhen Deren Electronic CO., LTD company. 3 info(@metasystem.it - www.metasystem.it

Automotive Electronic Design E-MOBILITY | TELEMATICS | SECURITY SYSTEM:

Certification Application Attestation Statements Date: gennaio 24, 2024 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) Meta System certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment! prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Statement for 47 CFR section 2.911(d)(5)Gi) Meta System (the applicant) certifies that, as of the date of the filing of this application, the applicant (1 - is /- is not identified on the Covered List as an entity producing covered equipment. Thank you, By: l Lu _____ Maldini Giorgio

: , (Signature) (Print name) Title: . Manager Founded Projects__ Company: _ MetaSystem__ Telephone: _ _+393498407266_ 1- The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coverediist . Mela System S.p.A. - Share Capilat 27,157.443,00 iv. - VAF Number and Fiscal Code 00271730350 - R.E.A, Number 120639 Via T. Galimberti, 6 - 42124 Reggio Emilia (Italy) - Tet. +39 0522 364114 - Fax +39 0522 364150 Subject to management and co-ordination of Shenzhen Deren Electronic CO., LTD company. infofdmetasystem.it - www.metasysten.#

Meta System S.p.A. Via Tancredi Galimberti 5 Reggio Emilia, 42124 Italy Date: 18/01/2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: PO3DEF3 FRN: 0006537807 US Agent Attestation Statement / Part 2.911(d)(7) Meta System S.p.A. certifies, that as of 21/12/2023 we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: PO3DEF3 Meta System S.p.A., accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Meta System S.p.A. for FCC ID: PO3DEF3 Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: Meta System S.p.A. Designated Agent: FCC US Agent, LLC Company Representative:

Designated Agent Representative:

Mr. Ciccone Alessandro Signature:

Tim Payne Signature: