FCC ID: 2AVVV-MW06 Meter wireless access point with WiFi

User Manual MW06 Version 1.0 1 ProductOverview 2 Introduction Key Features Supports IEEE802.11ac/a/b/g/n wireless standards Four 2.4 GHz Metal PIFA Antennas Four 5 GHz Metal PIFA Antennas One Metal PIFA Antenna for scanning radio Support Wave 2 MU-MIMO function Support Tx Beamforming to enlarge the transmitting distance. Support Scanning Radio, 2.4Ghz/5Ghz selectable IEEE802.11 PoE af Input design with Gigabit port supports. Flexible application by the built-in 2nd LAN port. More customized items on Band Steering for intelligent Management. Secured Guest Network option available The AP is 802.11 ac wave2/a/b/g/n Access Point with speeds up to 800 Mbps on 2.4GHz and 1,733Mbps on 5GHz band. It can be configured as an Access Point, or WDS (AP, Station). The AP is an affordable solution which is built in high-powered radios and long-range settings to replace the ordinary Access Points that do not have the range and reach to connect toa growing number of wireless users. With Wave2 features, the Access Point could reduce the handling period on client devices and network with more client devices at the same time. Meanwhile, the beamforming will gather energy to a specific direction and increase the transmitting distance. 3 Physical Interface (MW06) 2.4GHz:3.29dBi; 5GHz:5.84dBi 4 Physical & Environment Power Source DC Input: 12 VDC/2A PoE: compatible with 802.3af/at 54Vdc/0.6A Internal High Gain Antenna

~3.29dBi 2.4GHz antennas

(Peak Gain)

~5.84dBi 5GHz antennas 1 x 10/100/1000Mbps Ethernet Port with 802.3af/at PoE Interface 1 x DC power connector 1 x reset button Dimensions (W x D x H) 200x200x40 mm Mounting Ceiling, T-Rail and Wall mount Environment Operating temperature: 0C~40C Operating humidity: 0%~90% typical Technical Specifications Storage temperature: -30C~80C 5 Applications Wireless LAN (WLAN) products are easy to install and highly efficient. The following list describes some of the many applications made possible through the power and flexibility of WLANs:

Difficult-to-Wire Environments: There are many situations where wires cannot be installed, deployed easily, or cannot be hidden from view. Older buildings, sites with multiple buildings, and/or areas that make the installation of a Ethernet-based LAN impossible, impractical or expensive are sites where WLAN can be a network solution. Temporary Workgroups: Create temporary workgroups/networks in more open areas within a building; auditoriums, amphitheaters classrooms, ballrooms, arenas, exhibition centers, or temporary offices where one wants either a permanent or temporary Wireless LAN established. The Ability to Access Real-Time Information: Doctors/Nurses, Point-of-Sale Employees, and/or Warehouse Workers can access real-time information while dealing with patients, serving customers, and/or processing information. Frequently Changing Environments: Set up networks in environments that change frequently (i.e.: Show Rooms, Exhibits, etc.). Small Office and Home Office (SOHO) Networks: SOHO users require a cost-effective, easy, and quick installation of a small network. Training/Educational Facilities: Training sites at corporations or students at universities use wireless connectivity to exchange information between peers and easily access information for learning purposes. 6 FCC statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Meter Inc. 548 Market St., PMB 22716, San Francisco, CA 94104-5401 TEL1-703-901-2861 FAXN/A 7

User Manual MW07 Version 1.0 1 ProductOverview 2 Introduction Key Features Supports IEEE802.11ac/a/b/g/n wireless standards Four 2.4 GHz Metal PIFA Antennas Four 5 GHz Metal PIFA Antennas One Metal PIFA Antenna for scanning radio Support Wave 2 MU-MIMO function Support Tx Beamforming to enlarge the transmitting distance. Support Scanning Radio, 2.4Ghz/5Ghz selectable IEEE802.11 PoE af Input design with Gigabit port supports. Flexible application by the built-in 2nd LAN port. More customized items on Band Steering for intelligent Management. Secured Guest Network option available The AP is 802.11 ac wave2/a/b/g/n Access Point with speeds up to 800 Mbps on 2.4GHz and 1,733Mbps on 5GHz band. It can be configured as an Access Point, or WDS (AP, Station). The AP is an affordable solution which is built in high-powered radios and long-range settings to replace the ordinary Access Points that do not have the range and reach to connect toa growing number of wireless users. With Wave2 features, the Access Point could reduce the handling period on client devices and network with more client devices at the same time. Meanwhile, the beamforming will gather energy to a specific direction and increase the transmitting distance. IN DOOR USE ONLY 3 Physical Interface (MW07) 2.4GHz:3.29dBi; 5GHz:5.84dBi 4 Physical & Environment Power Source DC Input: 12 VDC/2A PoE: compatible with 802.3af/at 54Vdc/0.6A Internal High Gain Antenna

~3.29dBi 2.4GHz antennas

(Peak Gain)

~5.84dBi 5GHz antennas 1 x 10/100/1000Mbps Ethernet Port with 802.3af/at PoE Interface 1 x DC power connector 1 x reset button Dimensions (W x D x H) 200x200x40 mm Mounting Ceiling, T-Rail and Wall mount Environment Operating temperature: 0C~40C Operating humidity: 0%~90% typical Technical Specifications Storage temperature: -30C~80C 5 Applications Wireless LAN (WLAN) products are easy to install and highly efficient. The following list describes some of the many applications made possible through the power and flexibility of WLANs:

Difficult-to-Wire Environments: There are many situations where wires cannot be installed, deployed easily, or cannot be hidden from view. Older buildings, sites with multiple buildings, and/or areas that make the installation of a Ethernet-based LAN impossible, impractical or expensive are sites where WLAN can be a network solution. Temporary Workgroups: Create temporary workgroups/networks in more open areas within a building; auditoriums, amphitheaters classrooms, ballrooms, arenas, exhibition centers, or temporary offices where one wants either a permanent or temporary Wireless LAN established. The Ability to Access Real-Time Information: Doctors/Nurses, Point-of-Sale Employees, and/or Warehouse Workers can access real-time information while dealing with patients, serving customers, and/or processing information. Frequently Changing Environments: Set up networks in environments that change frequently (i.e.: Show Rooms, Exhibits, etc.). Small Office and Home Office (SOHO) Networks: SOHO users require a cost-effective, easy, and quick installation of a small network. Training/Educational Facilities: Training sites at corporations or students at universities use wireless connectivity to exchange information between peers and easily access information for learning purposes. 6 FCC statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Meter Inc. 548 Market St., PMB 22716, San Francisco, CA 94104-5401 TEL1-703-901-2861 FAXN/A 7

mM Model : MWO6:

er DC INPUT: 12V===. PoE INPUT: 54) 6A Meter, Inc. |

FOC ID: 2AVWV.aAnos LAND AQUAA

: 4 IC ID: 27998-Mwo6 SIN: MiW'0600001T02220 Gan ices-c09(e)/ ne-0036) | NIM MAC: 3C9066F89DD1 Made in Taiwan FE CE EK @%

This device complies with Part 15 of the FCG Rules. Operation is subject to the following two Concitons + (1) This device may not cause harmful ierference and (2) this device must accept any interference received, including interference that may cause undesired operation. caviersonse)/N6-0056) [NINN mT Taiwan eee ue SIN: MW0400021T022104 . VATE TT MAC(LAN1): 848094B00F5B

ww meter i=:

Seen ee AO FCC ID: 2AVVV-MW06 SN: Mw0700001T022100 IC ID: 27998-MW06 CAN ICES-003(B) / NMB-003(8) enum, FE CE LK ED @ B is. dowon corms wih Pat 1 oh FC alg Opaaion i suet te felowirg to

"his coves may not cause rma Mmesforonce and (2) fis Gove st Scapryinledrenee recs, acing orererca Pst may case sare epson

Meter Inc 548 Market St., PMB 22716, San Francisco, CA 94104 To: Federal Communications Commission Date: 2023/6/27 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii)

(KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Meter Inc (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Meter Inc (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Type of Equipment subject to FCC Certification:

FCC ID: 2AVVV-MW06 If you have any questions, please feel free to contact me Date:

City:

Name:

Signature:

June 27, 2023 San Francisco Jeff Leopando / Product Operations Manager ___________________________ Signatory

(signature of the applicant)

Meter Inc 548 Market St., PMB 22716, San Francisco, CA 94104 To: Federal Communications Commission Date: 2023/06/27 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Certification designating a U.S. Agent for Service of Process Section 2.911(d)(7)

(KDB 986446 D01 Covered Equipment) Meter Inc (the applicant) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information:

FRN: 0029316551 Contact Person: Jeff Leopando Company Name: Meter Inc Company Address: 548 Market St., PMB 22716, San Francisco, CA 94104 Email: certifications@meter.com Sincerely yours, Applicant Company (Grantee) : Meter Inc Jeff Leopando Title: Product Operations Manager Mail addresscertifications@meter.com TEL4155733933 FAX6504347408

Meter Inc 548 Market St., PMB 22716, San Francisco, CA 94104 8/10/2023 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AVVV-MW06 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:

- e.g. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature: _____________________ Name/Title: Jeff Leopando / Product Operations Manager Company Name: Meter Inc TEL: 4155733933 Email: certifications@meter.com

Meter Inc 548 Market St., PMB 22716, San Francisco, CA 94104-5401 UNII Device Declaration Letter Date : 7/20/2023 To whom it may concern :

We have declared below featured for FCC equipment authorization, Device FCC ID : 2AVVV-MW06

(1) DFS Device -- Master , Client with Radar detection capability , Client without radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) 5150-5250 5250-5350 5470-5725 5725-5850 Active Scanning

(the device can transmit a probe

(beacon)) Yes , Yes , Yes , Yes , No No No No passive scanning

(where the device is can listen only with no probes) Yes , Yes , Yes , Yes , No No No No Ad Hoc Mode capability Access point capability Yes , Yes , Yes , Yes , No No No No Yes , Yes , Yes , Yes , No No No No

(3) Country code selection ability -

Yes , No If no, pls explain how it was implemented : This function is disabled via firmware setting.

(4) Meet 15.202 requirement -

Yes , No , pls check below :

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-

DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on it was implement , and how software was controlled) Signature :

Name / Title : Jeff Leopando / Product Operations Manager Contact information. Telephone Number: 4155733933 Fax Number: 6504347408 Email: certifications@meter.com

Meter Inc 548 Market St., PMB 22716, San Francisco, CA 94104 Date: June 27, 2023 Dear Sir or Madam, Due to the business consideration, we hereby declare that our product of Meter wireless access point Model: MW06 and as following is difference Serial model: MW07 are identical with main model and the difference is :

# MW07 with 2GB DDR RAM, others are all identical to MW06 Model SCAN Radio SD RAM NOR NAND DFS MW06 TX/RX 1GB 256MB 2GB B2/B3 MW07 TX/RX 2GB 256MB 2GB B2/B3 Any questions regarding this declaration, please dont hesitate to contact us. Sincerely, Signature___________________________________ Name/Title: Jeff Leopando / Product Operations Manager Company Name: Meter Inc TEL: 4155733933 Email: certifications@meter.com

Meter Inc Declaration of Authorization We Name:

Address:

City:

State:

Country:

Meter Inc 548 Market St., PMB 22716 San Francisco California United States Declare that Name Representative of agent: William Chung / Senior Director Agent Company name:

Address:

City:

Country:

Eurofins E&E Wireless Taiwan Co., Ltd. No. 140-1, Changan Street, Bade District, Taoyuan Taiwan Is authorized to apply for Certification of the following product(s) Product Name: Meter wireless access point FCC ID : 2AVVV-MW06 Trademark: meter on our behalf This is valid until December 31, 2023, or until FCC certification are completed, whichever comes sooner. Date: June 26, 2023 City:

San Francisco Name:

Jeff Leopando/Product Operations Manager Signature:

Meter Inc 548 Market St., PMB 22716, San Francisco, CA 94104 Class II Permissive Change Letter Date: 2023/7/7 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern:

The purpose of this letter is to request Class II Permissive Change for:

FCC ID: 2AVVV-MW06 Original Grant Date: 02/09/2022 Pursuant to CFR 2.1043, Meter Inc hereby requests a Class II Permissive Change. The changes filed to this application are:

Add series model MW07 with 2GB DDR RAM. Enable U-NII-2A, U-NII-2C bands and DFS master function by software. Thank you for your attention in this matter. Best Regards, ____________________ Signatory Jeff Leopando Title: Product Operations Manager Mail addresscertifications@meter.com TEL4155733933 FAX6504347408

Meter Inc 548 Market St., PMB 22716, San Francisco, CA 94104 January 27, 2022 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Block Diagram Schematics

- Operational Description Subject: Permanent Confidentiality Request for FCC ID: 2AVVV-MW06 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature:

Clients name & title: Sunil Varanasi / CTO Contact information / address: 548 Market St., PMB 22716, San Francisco, CA 94104 Telephone Number: (415) 573 3933 Fax Number: 6504347408 Email: certifications@meter.com

Meter Inc 548 Market St., PMB 22716, San Francisco, CA 94104 UNII Device Declaration Letter Date : 1/27/2022 To whom it may concern :

We have declared below featured for FCC equipment authorization, Device FCC ID : 2AVVV-MW06

(1) DFS Device -- Master , Client with Radar detection capability , Client without radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) 5150-5250 5725-5850 Active Scanning

(the device can transmit a probe

(beacon)) Yes , Yes , No No passive scanning

(where the device is can listen only with no probes) Yes , No Yes , No Ad Hoc Mode capability Access point capability Yes , No Yes , No Yes , Yes , No No

(3) Country code selection ability - Yes , No If no, pls explain how it was implemented :

(4) Meet 15.202 requirement - Yes , No , pls check below :

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-

DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on it was implement , and how software was controlled) Signature :

Name / Title : Sunil Varanasi / CTO Contact information. Telephone Number: (415) 573 3933 Fax Number: 6504347408 Email: certifications@meter.com

Meter Inc Declaration of Authorization Meter Inc 548 Market St., PMB 22716 San Francisco California United States A Test Lab Techno Corp. No. 140-1, Changan Street, Bade District, Taoyuan Taiwan We Name:

Address:

City:

State:

Country:

Declare that Agent Company name:

Address:

City:

Country:

Is authorized to apply for Certification of the following product(s) Product Name: Meter wireless access point Model: MW06 FCC ID: 2AVVV-MW06 Trademark: meter on our behalf This is valid until December 31, 2022, or until FCC certification are completed, whichever comes sooner. Date: January 27, 2022 City:

Name:

San Francisco Sunil Varanasi / CTO Signature:

Meter Inc 548 Market St., PMB 22716, San Francisco, CA 94104 WIFI Channel 12 & 13 Declaration Letter To whom it may concern :

We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 & 13 operating capability for FCC ID : 2AVVV-MW06 Please check Product hardware does not have the capability to operate on channel 12 & 13 Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Pls explain detail here. _________________ Others Pls explain detail here. DATE : January 27, 2022 Signature FCC grantee contact person information. Name/Title: Sunil Varanasi / CTO Company Name: Meter Inc Tel: (415) 573 3933 Fax: 6504347408 Email: certifications@meter.com Address: 548 Market St., PMB 22716, San Francisco, CA 94104