Metra Reader Module RFID ISO Technical Manual Metra Reader Module RFID ISO Technical Manual Table of contents Metra Reader Module RFID ISO Technical Manual ................................................................................. 3 Final product labelling ......................................................................................................................... 4 Product description ............................................................................................................................. 4 Direct integration ................................................................................................................................ 4 Integration via 10 pole flat cable ........................................................................................................ 5 Electrical integration ........................................................................................................................... 5 Pin-out ................................................................................................................................................. 6 Technical data ..................................................................................................................................... 6 Appendix 1 .......................................................................................................................................... 7 Dimensions ...................................................................................................................................... 7 Appendix 2 .......................................................................................................................................... 7 Block Scheme................................................................................................................................... 7 Page 2 Metra Reader Module RFID ISO Technical Manual Metra Reader Module RFID ISO Technical Manual Manufacturer:
Metra ineniring d.o.o. IOC Trzin pruha 19 SI-1236 Trzin, Slovenia Metra MEW System Metra Reader Module RFID ISO 939 2ABT80005P939 2015 Trade Mark:
Model/Type ref.:
Part Number:
FCC ID:
Year of Construction:
phone:
fax:
web:
+386 1 56 10 740
+386 1 56 10 744 www.metra.si NOTE Metra ineniring d.o.o. integrates this product (Metra Reader Module RFID ISO) into different final products and is responsible for proper labelling of the final product, therefore final products label must include a statement Contains FCC ID: 2ABT8003P939. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Metra ineniring d.o.o. is responsible for products compliance. This product is in conformity with the essential requirements and other relevant requirements of the following EU Directives:
Radio and Telecommunications Terminal Equipment (R&TTE) Directive 2014/53/EU RoHS Recast (RoHS2) Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronics equipment. Low Voltage Directive (LVD) 2014/35/EU that ensures that electrical equipment within certain voltage limits provides a high level of protection for European citizens. Model/Type ref.: Metra Reader Module RFID ISO Part Number: 939 FCC ID: 2ABT80005P939 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and receiver. Metra Reader Module RFID ISO Technical Manual [rev.0-031116]
2016 Metra ineniring d.o.o. All Rights reserved. No part of this manual may be reproduced in any form or by any means without prior written permission of Metra ineniring d.o.o. The contents of this manual are subject to change without notice. All efforts have been made to ensure the accuracy of the contents of this manual, however, should any errors be detected, Metra ineniring would greatly appreciate being informed of them. Metra ineniring d.o.o. can assume no responsibility for any errors in this manual. Page 3 Metra Reader Module RFID ISO Technical Manual FCC Label is printed on the PCB because this is an OEM product for Metra ineniring d.o.o and not for the final customer. Metra ineniring d.o.o. integrates this product (Metra Reader Module RFID ISO) into different final products and is responsible for proper labelling of the final product, therefore final products label must include also a statement Contains FCC ID: 2ABT8003P939. Final product labelling Product description Metra Reader Module RFID ISO is designed to be build-in different Metra products. Reads ISO 15693, ISO 1443A and ISO 14443 B and compatible RFID media. It has two build-in blue LEDs for user signalization. Direct integration Example shows Metra Reader Module RFID ISO soldered directly onto the devices main PCB. Instead of using 10-
pole flat cable the connector PINs are soldered directly (as if the cable length is equal 0). It was tested as such during compliance tests. Page 4 Metra Reader Module RFID ISO Technical Manual Integration via 10 pole flat cable Example shows Metra Reader Module RFID ISO connected via 10 pole flat cable to host processor board. The cable length is limited to 20 cm. It was tested as such during compliance tests. Electrical integration Electrical integration to host processor:
Connections on Metra Reader Module Connections on Host CPU side Example LPC1225 Page 5 Pin-out Metra Reader Module RFID ISO Technical Manual Pin number Signal 1 2 3 4 5 6 7 8 9 10 GND SSEL MISO SCLK MOSI RESET LBLUE
+3V3
+5V GND Technical data Description Ground SPI: Slave Select SPI: Master IN; Slave OUT SPI: Slave Clock SPI: Master OUT, Slave IN Reset LED Blue
+ 3.3V Power Supply Input (Test Only)
+ 5V Power Supply Input Ground Operating voltage 5V DC over 10-pole flat cable Current consumption 0.07A average / 0.2A max. Operating temperature range
-10 to +50 C Visual signalization 2x blue LEDs. Built-in RFID reader Reads ISO 15693, ISO 1443A and ISO 14443 B compatible RFID media. RFID Antenna Passive PCB antenna tuned to 13.56 MHz. Connectors 1x SPI Dimensions in mm (w/h) 67/20 Page 6 Appendix Dimensions Appendix 2 Block Scheme Metra Reader Module RFID ISO Technical Manual Page 7