Metra WBC-WBI RFID ISO Module - Technical Manual Metra WBC-WBI RFID ISO Module - Technical Manual [rev.2-010318]
2017 Metra ineniring d.o.o. All Rights reserved. No part of this manual may be reproduced in any form or by any means without prior written permission of Metra ineniring d.o.o. The contents of this manual are subject to change without notice. All efforts have been made to ensure the accuracy of the contents of this manual, however, should any errors be detected, Metra ineniring would greatly appreciate being informed of them. Metra ineniring d.o.o. can assume no responsibility for any errors in this manual. Table of contents Metra WBC-WBI RFID ISO Module - Technical Manual ......................................................................... 3 Product Marking Label ..................................................................................................................... 4 Final product labelling Example Metra Wristband Issuer ............................................................. 5 Product description .......................................................................................................................... 7 Connectors Pin-out ........................................................................................................................... 7 PCB LED Indications and Inputs ........................................................................................................ 8 Blok Scheme ..................................................................................................................................... 9 Technical data ................................................................................................................................ 10 Page 2 Metra WBC-WBI RFID ISO Module - Technical Manual Metra WBC-WBI RFID ISO Module - Technical Manual Manufacturer:
phone:
fax:
web:
+386 1 56 10 740
+386 1 56 10 744 www.metra.si Metra ineniring d.o.o. IOC Trzin pruha 19 SI-1236 Trzin, Slovenia Metra MEW System Metra WBC-WBI RFID ISO Module 1429 2ABT8000P1429 2017 Trade Mark:
Model/Type ref.:
Part Number:
FCC ID:
Year of Construction:
NOTE This product is for Metra internal use only!
For integration into Metra products. 6th March 2017 Metra ineniring d.o.o. All Rights reserved. The contents of this document are subject to change without notice. This product is in conformity with the essential requirements and other relevant requirements of the following EU Directives:
Radio and Telecommunications Terminal Equipment (R&TTE) Directive 2014/53/EU RoHS Recast (RoHS2) Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronics equipment. Low Voltage Directive (LVD) 2014/35/EU that ensures that electrical equipment within certain voltage limits provides a high level of protection for European citizens. Environmental Information for EU customers WEEE Directive Statement:
This symbol indicates the product is in conformity with the protection requirements of European Council Directive 2012/19/EU. It requires that products marked with this symbol must not be disposed of with unsorted municipal waste. This product must be disposed of separately from household waste via designated collection facilities appointed by local authorities. Please contact your local authorities or waste disposal service for more detailed information. Model/Type ref.: Metra WBC-WBI RFID ISO Module Part Number: 1429 FCC ID: 2ABT80006P1429 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the Page 3 Metra WBC-WBI RFID ISO Module - Technical Manual instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and receiver. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Product Marking Label Photo 1 Product marking label position Product Marking Label is attached to the front left side of the module housing as shown on the photo above. Metra WBC-WBI RFID ISO Module is Metra internal OEM product to be integrated to the Metra final products and is not intended for free market. Metra ineniring d.o.o. integrates Metra WBC-WBI RFID ISO Module is responsible for proper labelling of the final product. The final products include a statement Contains FCC ID: 2ABT80006P1429. into different final products and label must Page 4 Metra WBC-WBI RFID ISO Module - Technical Manual Final product labelling Example Metra Wristband Issuer Photo below shows Metra final product called Metra Wristband Issuer. It integrates Metra WBC-WBI RFID ISO Module as an OEM module. Photo 2 Final product Metra Wristband Issuer Page 5 Metra WBC-WBI RFID ISO Module - Technical Manual Photo 3 Module integration into final product Photo 4 Final product marking label The same labelling principle should be applied for all other Metra final products integrating Metra WBC-WBI RFID ISO Module. Page 6 Metra WBC-WBI RFID ISO Module - Technical Manual Product description Metra WBC-WBI RFID ISO Module is an Cortex-M3 microcontroller based OEM RFID transceiver module intended for internal Metra use only. Its purpose is to use it as electronics controlled module for different products manipulating (moving through machine) Metra RFID Wristbands. For that purpose it contains specific electronic parts that enables construction of the RFID electromechanical devices. It is not intended for sale as standalone product and is integrated into Metra final products such as Metra Wristband Issuer. Metra WBC-WBI RFID ISO Module main features are:
Cortex-M3 (NXP LPC1769) microcontroller chip. Two L6470H fully integrated microstepping motor driver chips. RFID reader (NXP CLRC663) connected to Passive RFID Antenna tunned to 13,56 MHz (PAN Antenna). It Reads ISO 15693, ISO 1443A, ISO 14443B compatible RFID media. Internal LED and audio signalization. Hall proximity sensors on external PCB used for positioning control. External PCB LED signalisation. MEW communication interface. Power supply unit. DCDC converters from 24VDC to 12VDC/3V3DC/5VDC. Door sensor input. Connectors Pin-out Pin numbering for MM Connectors Page 7 CON4 and CON5: WBCS (WBC LED & Hall Sensors) Metra WBC-WBI RFID ISO Module - Technical Manual Pin number 1 2 3 4 5 6 7 8 9 10 CON6: WBIS (WBI Hall Sensors) Pin number 1 2 3 4 5 6 Signal LEDWR N.C. LEDWB
+24V HALL1 HALL2 HALL3 HALL4
+5V GND Signal SENS2 GND SENS3 SENS1 SENS4
+5V Description RED LED signal output (3V3 logic output) Not Connected BLUE LED signal output (3V3 logic output)
+ 24V Power Supply Output Hall Sensor 1 input (logic 3V3 tolerates 5V) Hall Sensor 2 input (logic 3V3 tolerates 5V) Hall Sensor 3 input (logic 3V3 tolerates 5V) Hall Sensor 4 input (logic 3V3 tolerates 5V)
+ 5V Power Supply Output Ground Description Hall Sensor 2 input (logic 3V3 tolerates 5V) Ground Hall Sensor 3 input (logic 3V3 tolerates 5V) Hall Sensor 1 input (logic 3V3 tolerates 5V) Hall Sensor 4 input (logic 3V3 tolerates 5V)
+ 5V Power Supply Output PCB LED Indications and Inputs Page 8 Blok Scheme Metra WBC-WBI RFID ISO Module - Technical Manual Page 9 Technical data Metra WBC-WBI RFID ISO Module - Technical Manual PCB dimensions Operating voltage/Current cons. 24 VDC 0.2A average / 1.5A max Operating temperature range
-10 to +50 C External LED signalization Blue LEDs and Red LEDs on external connector Audio signalization Buzzer On board LED signalisation RFID detected, Motor Stall, PWR 24V, MEW active, Door Input Built-in RFID reader Reads ISO 15693, ISO 1443A, ISO 14443 B compatible RFID media. RFID Antenna Passive antenna tuned to 13.56MHz. Motor Drivers Two Stepper Motors max 1.5A/phase External Inputs 4 Hall sensors, Door sensor Communication 1xMEW (LIN) Connectors 24VDC, MEW, Motors, RFID Antenna, LED&Hall Sensors PCB dimensions in mm (w/h/d) 110/66/12 Page 10