OMNIS Liquid Adapter Product directions 8.0108.8001EN / 2015-XX-XX Metrohm AG CH-9100 Herisau Switzerland Phone +41 71 353 85 85 Fax +41 71 353 89 01 info@metrohm.com www.metrohm.com OMNIS Liquid Adapter Product directions 8.0108.8001EN / 2015-XX-XX zst Technische Dokumentation Metrohm AG CH-9100 Herisau techdoc@metrohm.com This documentation is protected by copyright. All rights reserved. This document has been prepared with great care. However, errors can never be entirely ruled out. Please send comments regarding possible errors to the address above. Documentation in additional languages can be found on http://documents.metrohm.com. Table of contents Table of contents 1 Overview 1.1 1 Brief description .................................................................... 1 1.2 Overview ................................................................................ 1 2 Safety 2.1 2 General safety instructions .................................................. 2 3 Additional information 3 4 Technical specifications 4 Instrument ............................................................................. 4 Ambient conditions .............................................................. 4 5 Declaration of conformity 5 Safety specifications ............................................................. 5 Electromagnetic compatibility (EMC) .................................. 5 Radio ...................................................................................... 5 4.1 4.2 5.1 5.2 5.3 OMNIS Liquid Adapter III 1 Overview 1 Overview 1.1 Brief description The OMNIS Liquid Adapter (6.01600.010) is a quick-change coupling for chemical bottles with the following sealing mechanisms:
Bottle cap, single-use (mounted on purchased chemical bottles) Bottle cap, multi-use (6.01600.100) It takes only a single hand movement to move the OMNIS Liquid Adapter from one bottle to the next. Cable connections and tubing connections remain in place. The bottle cap, single-use is equipped with an RFID tag on which the data of the chemicals in the bottle is stored. The OMNIS Liquid Adapter has an RFID reader that reads out this data and transfers it to the software. 1.2 Overview Figure 1 Liquid Adapter - Parts 2 4 Status display Aspiration tube part of 6.01600.xxx 1 3 5 Cable RFID reader Tubing adapter part of 6.01600.xxx OMNIS Liquid Adapter 1 2.1 General safety instructions 2 Safety TODO Work on this Safety chapter is not yet finished 2.1 General safety instructions To use the OMNIS Liquid Adapter safely, you must be aware of the funda-
mentals of safe working practices in laboratories. You must be familiar with the safety apparatus in your laboratory and know how to use it. Observe the following safety instructions for safe operation of the OMNIS Liquid Adapter. CAUTION Problems with leak-tightness The leak-tightness of the OMNIS Liquid Adapter can no lon-
ger be guaranteed if the sealing lip or the sealing surface of the aspiration tube is soiled or damaged. The sealing lip and the sealing surface of the aspiration tube must always be kept clean and intact. Check the status of the aspiration tube every time a bot-
tle is replaced. CAUTION Damage to the electronics The OMNIS Liquid Adapter is not resistant to splash water. Water can seep into the interior during cleaning and cause damage to the electronics. Do not clean the OMNIS Liquid Adapter under running water. Do not use a wash bottle to clean the OMNIS Liquid Adapter. 2 OMNIS Liquid Adapter 3 Additional information 3 Additional information TODO The definitive Internet address of the Metrohm Information portal has not yet been established. Additional information concerning the OMNIS Liquid Adapter can be found:
in the Help section of the software in the Metrohm Information portal on the Internet Path Information portal OMNIS Liquid Adapter 3 4.1 Instrument 4 Technical specifications 4.1 Instrument High-frequency part Frequency Technology Distance Connector 13.56 MHz ISO/IEC 14443 A, MIFARE, inductive Up to 50 mm Plug connection Round plug, size 00, 4-pin, locked Power supply Supply voltage Power con-
sumption 10 V - 27 V DC voltage Approx. 4 Wp Status display Multi-colored, can be configured via software 4.2 Ambient conditions Nominal function range Temperature Humidity Storage and trans-
port
+5 - +45C Max. 85%
Temperature
-40 - +70C 4 OMNIS Liquid Adapter 5 Declaration of conformity 5 Declaration of conformity 5.1 Safety specifications This instrument fulfills the following electrical safety requirements:
CE marking in accordance with the EU directives:
2014/35/EC (Low Voltage Directive, LVD) 2014/30/EC (EMC Directive, EMC) 2014/53/EC (Radio Systems (RED)) Design and testing Safety instructions According to EN/IEC 61010-1, protection class III, EN/IEC 60950-1, EN/
IEC 60529, degree of protection IP20. This document contains safety instructions which have to be followed by the user in order to ensure safe operation of the instrument. 5.2 Electromagnetic compatibility (EMC) Requirements EN/IEC 61326-1 Emission Immunity Radio 5.3 Radio EN/IEC 61000-6-3 EN 55011 / CISPR 11 EN/IEC 61000-6-2 EN/IEC 61000-4-2 EN/IEC 61000-4-3 EN/IEC 61000-4-4 ETSI EN 301 489-1 ETSI EN 301 489-3 ETSI EN 302 291-1, product class I ETSI EN 302 291-2 OMNIS Liquid Adapter 5 Index A Additional information ............... 3 I Immunity .................................... 5 S Safety instructions ...................... 2 B Brief description ......................... 1 E Emission ..................................... 5 P Parts overview ............................ 1 Product family standard .............. 5 6 OMNIS Liquid Adapter