all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 953.12 KiB | September 07 2015 | |||
1 |
|
Internal Photos | Internal Photos | 146.59 KiB | September 07 2015 | |||
1 |
|
External Photos | External Photos | 83.91 KiB | September 07 2015 | |||
1 |
|
Label Artwork and Location | ID Label/Location Info | 131.10 KiB | September 07 2015 | |||
1 | RF Exposure Info | September 07 2015 | ||||||
1 |
|
Block Diagram | Block Diagram | 52.23 KiB | September 07 2015 | |||
1 |
|
Circuit Diagram | Schematics | 43.85 KiB | September 07 2015 | |||
1 |
|
Letter of Agency | Cover Letter(s) | 27.51 KiB | September 07 2015 | |||
1 | Test Setup Photos | September 07 2015 | ||||||
1 |
|
Technical Description | Operational Description | 1.33 MiB | September 07 2015 | |||
1 | Test Report | September 07 2015 |
1 | User Manual | Users Manual | 953.12 KiB | September 07 2015 |
ENG AGES 5+ YEARS FR GE : 5 ANS ET +
ES
#SelfieSnaps Stick 539650E4C, 539667E4C CONTENTS A. 1 Bratz #SelfieSnaps Stick with Lip attachment. B. 1 Cloe Doll w/Outfit C. 1 Jade Doll w/Outfit E. 1 Pair of Earrings F. 1 Smart Phone (for doll) G. 1 Smart Phone Case (for Doll) H. Remote Control D. 1 Pair of Shoes ADULT SUPERVISION RECOMMENDED IMPORTANT NOTE:
Large, bulky or elaborate phone cases may need to be removed before fitting your phone into the selfie clamp. Once phone is installed, make sure phone fits snugly and safely into clamp before shooting photos. MD Perche #SelfieSnapsTM/MC 539650E4C, 539667E4C CONTENU A. 1 perche #SelfieSnapsTM/MC Bratz/MD avec accessoire en forme de lvres C. 1 poupe JadeTM/MC avec tenue B. 1 poupe CloeTM/MC avec tenue D. 1 paire de chaussures E. 1 paire de boucles doreilles F. 1 smartphone/tlphone intelligent (pour la poupe) G. 1 tui de smartphone/tlphone intelligent (pour la poupe) H. tlcommande UN ADULTE DOIT EFFECTUER LA SURVEILLANCE. REMARQUE IMPORTANTE :
Il faudra peut-tre enlever les tuis de tlphone plus gros, volumineux ou labors avant dinsrer ton tlphone dans la pince autophoto. Une fois le tlphone install, vrifie si le tlphone est bien insr dans la pince avant de prendre des photos. Palo #SelfieSnaps
-
Edad recomendada: +5 aos SE RECOMIENDA LA SUPERVISIN DE UN ADULTO. 539650E4C, 539667E4C CONTENIDO A. 1 Palo Bratz #SelfieSnaps con accesorio forma de Labio B. 1 Mueca Cloe con traje C. 1 Mueca Jade con un traje D. 1 Par de zapatos E. 1 Par de Pendientes F. 1 Smart Phone (Para la mueca) H. Mando a distancia G. 1 Funda de Smart Phone (Para la mueca) NOTA IMPORTANTE:
Las fundas grandes o voluminosos deben ser retiradas del telfono antes de colocar este, en el soporte de selfie. Una vez est instalado el telfono , asegrese de que queda perfectamente sujeto por las abrazaderas antes de hacer fotos. A. B. E. H. E. C. D. Fig. 5 THUMB SCREW 4. Loosen thumb screw and adjust phone to desired angle, then re-tighten screw. (Fig. 5) D. F. G. F. G. Fig. 6 CLOE 539650 JADE 539667 Illustrations are for reference only. Styles may vary from actual contents. WIRELESS REMOTE DEVICE BATTERY INSTALLATION Should the wireless remote device battery need replacing an adult must install a new button cell battery. Heres how:
1. Turn the device OFF. 2. Using a Phillips screwdriver (not included). Remove the screw on the battery compartment cover on the back of the device and slide the cover open. (Fig.1) 3. Remove the old button cell battery and dispose of it properly. 4. Install one (1) CR2032 button cell battery (included) making sure the (+) and (-) side faces upward as shown. (Fig. 2) 5. Slide the cover back on the battery compartment until it clicks into place and replace the screw. BATTERY COMPARTMENT COVER ON/OFF SWITCH E
-
D
-
I
-
L
-
S BATTERY Fig. 1 Fig. 2 BACK BACK Fig. 3 LITHIUM BATTERY, 3V FRONT iOS BUTTON ANDROID BUTTON PAIRING THE WIRELESS REMOTE DEVICE AND YOUR PHONE Before using your wireless remote device it must be paired with your iOS or Android phone. Heres how:
1. After installing the battery, move the ON/OFF switch on the device to ON.
(Fig. 1). The LED indicator light will flash. 2. Activate the wireless remote function on your phone by going to SETTINGS, tapping on Bluetooth, then tapping on AB shutter 3 in your device list. The device will automatically pair with your phone in a few seconds. 3. The camera app built into your phone will now allow you to take photos by pressing on the larger button for iOS phones or the smaller button for Android Phones. IMPORTANT NOTE:
If the built-in camera APP does not function with the wireless device, download the free Camera 360APP from the Google Play Store. Keyword search: Camera 360. COMPATIBILITY INBUILT CAMERA APP CAMERA 360 APP CAMERA CAMERA The wireless remote device is compatible with iOS 6.o or newer and Android 4.3 or newer:
COMPATIBILITY LIST *
iPhone 4/4s/5/5s/5c iPad 3/2 iPad mini iPad with Retina Display iPod Touch 4th generation or newer Samsung Galaxy S2 / S3 /S4+
Note 1, Note 2, Note 3+
Tab 2, Note 8,10.1+
Moto X /Nexus 4,5,7+
Xiaomi 1A, 2A, 3+
Sony Xperia S/4.3 HTC Newest and X+
Other android phones ANDROID CAMERA CAMERA 360 iOS 360 iOS 360 iOS NO USE 360 iOS
* Device names are trademarks of their respective owners. INSTALLING PHONE INTO SELFIE CLAMP Fig. 4 1. Pull top of phone clamp upward and hold clamp open. (Fig. 4) 2. Fit cell phone into area as shown with screen facing outward. (Fig. 4) 3. Release phone clamp and make sure cell phone is firmly in place before proceeding. (Re-fit phone if necessary.) 5. Hold Stick with one hand near camera clamp one hand at end of stick then twist in opposite directions to unlock telescoping portion of stick. 6. Expand telescoping portion of Stick as desired then twist ends of stick in opposite directions to lock into place. (Stick expands from 9 to 22 . ) 7. Line up your selfie shot and press button on the bluetooth to take a photo. IMPORTANT NOTES Please be aware of any local or venue restrictions which may be in effect before using the Selfie Stick. Always turn the wireless remote device OFF after playing to conserve battery life. DO NOT allow water or liquid of any kind to come in contact with the wireless remote device. DO NOT wash dolls hair with water and/or soap. DO NOT dry dolls hair with a hair dryer or subject hair to very high heat in any manner as it will irreparably damage the hair. SAFE BATTERY USAGE Use alkaline batteries for best performance and longer life. Use only the type battery recommended for the unit. Batteries should be replaced only by an adult. Insert batteries with the correct polarity ( + and ). Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries. Do not short-circuit batteries. When not used for an extended time, remove batteries to prevent possible leakage and damage to the unit. Do not mix rechargeable and non-rechargeable batteries. Rechargeable batteries are to be removed from the toy before charging. Rechargeable batteries are to be recharged only under adult supervision. Do not recharge non-rechargeable batteries. Exhausted batteries are to be removed from the toy. Do not dispose of batteries in fire as they may leak or explode. FCC COMPLIANCE NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.0359
[Hereby, MGA Entertainment (H.K.) Ltd. declares that this Bratz #SelfieSnaps Stick is in compliance with essential requirements and other provisions of Directive 1999/5/EC]
CAN ICES-3(B)/NMB-3(B) This device complies with Industry Canada Licence-exempt RSS-210. Operation is subject to the following two conditions: (1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Lets care for the environment!
The wheelie bin symbol indicates that the product must not be disposed of with other household waste. Please use designated collection points or recycling facilities when disposing of the item. Do not treat old batteries as household waste. Take them to a designated recycling facility. A. B. D. H. E. Fig. 5 VIS DE SERRAGE 4. Desserre la vis de serrage et rgle le tlphone langle dsir, puis resserre la vis (fig. 5). E. C. D. F. CLOETM/MC 539650 G. F. JADE/MC 539667 G. Fig. 6 Les illustrations servent de rfrence seulement. Les styles peuvent diffrer du contenu rel. INSERTION DES PILES DANS LA TLCOMMANDE SANS FIL Si la pile de la tlcommande sans fil a besoin dtre remplace, un adulte doit procder linstallation de la pile type bouton neuve. Voici comment procder :
1. teignez lappareil. 2. laide dun tournevis cruciforme (non inclus), retirez la vis du couvercle du compartiment piles au dos de lappareil et glissez le couvercle pour louvrir (fig. 1). 3. Retirez la pile type bouton use et mettez-la au rebut de manire approprie. 4. Insrez une (1) pile type bouton CR2032 en vous assurant que les bornes
(+) et (-) soient orientes vers le haut, tel que montr (fig. 2). 5. Replacez le couvercle sur le compartiment piles en le glissant jusqu ce quil senclenche et remettez la vis. COUVERCLE DU COMPARTIMENT PILES INTERRUPTEUR ON/OFF R E S S I L G PILE Fig. 1 Fig. 2 DOS DOS Fig. 3 PILE AU LITHIUM, 3 V DEVANT BOUTON iOS BOUTON ANDROID POUR JUMELER LA TLCOMMANDE SANS FIL TON TLPHONE Avant dutiliser la tlcommande sans fil, elle doit tre jumele ton tlphone iOS ou Android. Voici comment procder :
1. Aprs avoir insr la pile, glisse linterrupteur ON/OFF de lappareil sur ON (fig. 1). Le voyant DEL clignotera. 2. Active la fonction de la tlcommande sans fil sur ton tlphone en slectionnant SETTINGS , puis en tapant sur Bluetooth et ensuite sur AB shutter 3 dans ta liste dappareils. Lappareil se jumellera automatiquement ton tlphone en quelques secondes. 3. Lappli appareil photo intgre ton tlphone te permettra maintenant de prendre des photos en appuyant sur le plus gros bouton pour les tlphones iOS ou sur le plus petit bouton pour les tlphones Android. REMARQUE IMPORTANTE Si lappli appareil photo intgre ne fonctionne pas avec lappareil sans fil, tlcharge lappli Camera 360 de la boutique Google Play. Mot-cl de recherche : Camera 360 . COMPATIBILIT APPLI CAMERA CAMERA CAMERA 360 La tlcommande sans fil est compatible avec les appareils iOS 6.0 ou les versions plus rcentes et Android 4.3 ou les versions plus rcentes :
LISTE DE COMPATIBILIT*
APPLI APPAREIL iPhone 4/4s/5/5s/5c PHOTO INTGRE iPad 3/2 iPad mini iPad avec affichage Retina iPod Touch de 4e gnration ou plus rcent Samsung Galaxy S2 / S3 /S4+
Note 1, Note 2, Note 3+
Tab 2, Note 8,10.1+
Moto X /Nexus 4,5,7+
Xiaomi 1A, 2A, 3+
Sony Xperia S/4.3 HTC Newest et X+
Autres tlphones Android
*Noms des appareils et marques de commerce de leurs titulaires respectifs. POUR INSRER LE TLPHONE DANS LA PINCE DE PERCHE PAS DUTILISATION ANDROID CAMERA CAMERA 360 iOS 360 iOS 360 iOS 360 iOS AUTOPHOTO Fig. 4 1. Soulve la partie suprieure de la pince tlphone et maintiens la pince ouverte (fig. 4). 2. Insre le portable/cellulaire dans cette zone, tel que montr en orientant lcran vers lextrieur (fig. 4). 3. Relche la pince tlphone et assure-toi que le portable/cellulaire est bien en place avant de poursuivre. (Rinstalle le tlphone au besoin). 5. Tiens la perche dune main prs de la pince de lappareil photo en plaant une main lextrmit de la perche, puis tourne en sens opposs pour dverrouiller la partie tlescopique de la perche. 6. Dploie la partie tlescopique de la perche tel que dsir, puis tourne les extrmits de la perche en sens opposs pour la verrouiller. (La perche se dploie de 22,86 cm 57,15 cm (9 po 22,5 po)). 7. Cadre ton autophoto et appuie sur le bouton du Bluetooth pour prendre une photo. REMARQUES IMPORTANTES Tu dois tenir compte des restrictions locales pouvant tre en vigueur avant dutiliser la perche autophoto. teins toujours la tlcommande sans fil aprs le jeu pour conserver la puissance des piles. Nexpose PAS la tlcommande sans fil de leau ou une humidit quelconque. NE lave PAS les cheveux de la poupe avec de leau et/ou du savon. NE sche PAS les cheveux de la poupe avec un sche-cheveux et NE les expose PAS une forte chaleur, car cela les abmerait irrmdiablement. USAGE SANS DANGER DES PILES Utilisez des piles alcalines pour une meilleure performance et une meilleure durabilit. Utilisez seulement le type de piles recommand pour lappareil. Les piles doivent tre remplaces seulement par un adulte. Les piles doivent tre insres en respectant la polarit (+ et -). Ne combinez pas des piles neuves et usages. Ne combinez pas des piles alcalines, standard (sches) ou rechargeables (nickel-cadmium). Ne court-circuitez pas les piles. Si le jouet nest pas utilis pendant de longues priodes, retirez les piles pour prvenir toute fuite et tout endommagement possibles du jouet. Ne combinez pas des piles rechargeables et non rechargeables. Les piles rechargeables doivent tre retires du jouet avant la charge. Les piles rechargeables doivent seulement tre charges sous la surveillance dun adulte. Ne rechargez pas des piles non rechargeables. Les piles dcharges doivent tre retires du jouet. Ne jetez pas les piles au feu ; elles pourraient couler ou exploser. CONFORMIT LA FCC REMARQUE : Cet appareil a t test et est jug conforme aux limites des appareils numriques de classe B, conformment la partie 15 des rgles de la FCC. Ces limites sont conues pour fournir une protection raisonnable contre le brouillage prjudiciable dans une installation rsidentielle. Cet appareil produit, utilise et peut mettre une nergie de radiofrquence et, sil nest pas install et utilis conformment aux directives, peut causer un brouillage prjudiciable aux radiocommunications. Toutefois, il ny a aucune garantie que le brouillage ne surviendra pas dans une installation particulire. Si cet appareil cause un brouillage prjudiciable la rception de la radio ou de la tlvision ; ce qui peut tre dtermin en teignant lappareil et en le rallumant, lutilisateur devra essayer de corriger le brouillage par lune ou lautre des mesures suivantes :
Rorienter ou resituer lantenne de rception. Accrotre la distance entre le matriel et le rcepteur. Brancher lappareil dans une prise sur un circuit autre que celui auquel le rcepteur est branch. Consulter le dtaillant ou un technicien de radio/tlvision expriment pour obtenir de laide. Cet appareil est conforme la partie 15 des rgles de la FCC. Le fonctionnement est sujet aux deux conditions suivantes :
(1) cet appareil ne doit pas causer de brouillage prjudiciable et (2) cet appareil doit accepter tout brouillage reu, incluant les brouillages qui peuvent causer un mauvais fonctionnement. Attention : les changements ou modifications de cet appareil non autoriss par le tiers responsable de la conformit pourraient annuler lautorit de lutilisateur faire fonctionner cet appareil. 0359
[Par la prsente, MGA Entertainment (H.K.) Ltd. dclare que cette perche Bratz/MD #SelfieSnapsTM/MC est conforme aux exigences essentielles et aux autres stipulations de la directive 1999/5/EC]
CAN ICES-3(B)/NMB-3(B) Cet appareil est conforme lexemption de licence RSS-210 dIndustrie Canada. Le fonc tionnement est sujet aux deux conditions suivantes :
(1) cet appareil ne doit pas causer de brouillage prjudiciable et (2) cet appareil doit accepter tout brouillage reu, incluant les brouillages qui peuvent causer un mauvais fonctionnement. Protgeons notre environnement !
Le symbole de poubelle indique que le produit ne doit pas tre jet avec les dchets domestiques. Utilisez les lieux de collecte ou les tablissements de recyclage dsigns pour mettre cet article au rebut. Ne traitez pas les piles usages comme un dchet domestique. Apportez-les un tablissement de recyclage dsign. A. H. B. E. C. E. Fig. 5 TORNILLO DE MARIPOSA 4. Afloje el tornillo de mariposa, ajuste el telfono en el ngulo deseado y vuelva a apretar el tornillo . (Fig. 5) D. F. CLOE 539650 D. G. JADE 539667 G. F. Las ilustraciones son nicamente de referencia. Los modelos pueden varias del contenido actual. INSTALACIN DE UN DISPOSITIVO A CONTROL REMOTO Ser necesario la ayuda de un adulto para instalar la nueva pila (de botn) en el dispositivo. Aqu tiene cmo hacerlo:
1. apague el dispositivo. 2. Use un destornillador Phillips (no incluido). Quite el tornillo de la tapa colocada en la parte posterior del dispositivo y desplaza la tapa. (Fig.1) 3. Quite la pila de botn antigua y coloque la nueva, correctamente. 4. Instale una (1) pila de botn CR2032 (incluida) y asegrese de que el (+) y
(-) estn correctamente colocados.(Fig. 2) 5. Deslice la tapa y colquela en el compartimento de la pila hasta que encaje en su lugar y vuelva a colocar el tornillo. TAPA DEL COMPARTIMENTO DE LA PILA Botn on/off E
-
D
-
I
-
L
-
S PILA Fig. 1 Fig. 2 DETRS DETRS Fig. 3 PILA DE LITIO, 3V DELANTE BOTN iOS BOTON ANDROID SINCRONIZACIN DEL DISPOSITIVO CONTROL REMOTO INALMBRICO Y TU TELFONO Antes de usar el dispositivo de control remoto inalmbrico debe estar sincronizado a su mvil iOS o Android. aqu tiene cmo hacerlo:
1. despus de instalar la pila, mueva el interruptor ON/OFF a la posicin ON. (Fig.1). El indicador de luz LED se encender. 2. Activar la funcin del dispositivo en su telfono yendo a HERRAMIENTAS, y seleccionando "Bluetooth", a continuacin seleccione la opcin " obturador AB 3" en su lista de dispositivos. Se conectar automticamente a su telfono en solo unos segundos. 3. La aplicacin de la cmara aparecer en el telfono, para poder hacer las fotos presione el botn grande en el mvil iOS o el pequeo en Android. NOTA IMPORTANTE:
Si la aplicacin de la cmara no funciona con el dispositivo de control remoto, debe descargarse gratis, la aplicacin "Camera 360" en Google Play Store. Palabra clave para buscar: "Camera 360"
COMPATIBILIDAD APP CMARA 360 APP CMARA APP CMARA INTEGRADA CMARA El dispositivo de control remoto es compatible con iOs 6.0 o posteriores y Android 4.3 o posteriores:
LISTA DE COMPATIBILIDAD*
iPhone 4/4s/5/5s/5c iPad 3/2 iPad mini iPad con pantalla de retina iPod Touch de 4 generacin o posterior Samsung Galaxy S2 / S3 /S4+
Note 1, Note 2, Note 3+
Tab 2, Note 8,10.1+
Moto X /Nexus 4,5,7+
Xiaomi 1A, 2A, 3+
Sony Xperia S/4.3 HTC Posterior y X+
Otros Mviles android
*Los nombres de dispositivos son marcas comerciales de sus respectivos propietarios NO UTILIZA ANDROID CMARA CMARA 360 iOS 360 iOS 360 iOS 360 iOS INSTALACIN DEL TELFONO EN EL SOPORTE Fig. 6 5. Sujete el palo con una mano colocada en la parte ms prxima al telfono y la otra al final del palo, despus grelo en sentido opuesto para bloquear el palo y que no se mueva. 6. Expandir el palo y mover para desbloquear (se expande desde 9" a 22 1/2") 7. Levante el palo de selfie y presione el botn de bluetooth para hacer fotos. NOTA IMPORTANTE Por favor, debe ser consciente de las restricciones del lugar en el que se encuentre, ya que estas deben entrar en vigor antes de utilizar el palo de selfie . Apague siempre el dispositivo despus de usarlo para conservar la vida de la pila. NO permita que el dispositivo entre en contacto con agua o cualquier otro lquido. NO lavar el pelo de las muecas con agua y/o jabn. NO secar el pelo de las muecas con secador o exponerlo a altas temperaturas, ya que podr causar daos irreparables al cabello. CMO UTILIZAR LAS PILAS DE MANERA SEGURA Utilice pilas alcalinas para un mejor rendimiento y una mayor duracin de las mismas. Utilice para la unidad, nicamente las pilas del tipo recomendado. Las pilas deben ser reemplazadas slo por un adulto. Introduzca las pilas con la polaridad correcta ( + y -) . No mezcle pilas viejas y nuevas. No combine pilas alcalinas estndar ( carbn-cinc ) y recargables
(nquel - cadmio). No provoque cortocircuitos. Cuando no se utilice durante un tiempo prolongado, extraiga las pilas para evitar posibles fugas y daos a la unidad. No mezcle pilas recargables y no recargables. Las pilas recargables deben retirarse del juguete antes de ser cargadas. Las pilas recargables deben recargarse slo bajo la supervisin de un adulto. No recargue las pilas no recargables. Las pilas agotadas deben retirarse del juguete. No arroje las pilas al fuego, ya que pueden tener fugas o explotar. CUMPLIMIENTO FCC NOTA: Este equipo ha sido probado y cumple con los lmites para un dispositivo digital de Clase B, de acuerdo con la Parte 15 de las normas de la FCC. Estos lmites estn diseados para proporcionar una proteccin razonable contra interferencias en una instalacin domstica. Este equipo genera, utiliza y puede radiar energa de frecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencias en las comunicaciones de radio. Sin embargo, no hay garanta de que no se produzcan interferencias en una instalacin particular. Si este equipo causa interferencias en la recepcin de radio o televisin, que pueden estar determinadas por el encendido o apagado del equipo, se recomienda al usuario que intente corregir la interferencia mediante una o ms de las siguientes medidas:
Reorientar o reubicar la antena receptora. Aumente la separacin entre el equipo y el receptor. Conectar el equipo a una toma de un circuito distinto de aquel al que est conectado el receptor. Consulte al distribuidor o a un tcnico de radio / televisin para obtener ayuda. Este dispositivo cumple con la Parte 15 de las Reglas de la FCC. La operacin est sujeta a las dos condiciones siguientes :
(1) Este dispositivo no puede causar interferencias perjudiciales y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo interferencias que puedan causar un funcionamiento no deseado. ADVERTENCIA: Los cambios o modificaciones en esta unidad no aprobados expresamente por la parte responsable del cumplimiento podra anular la autoridad del usuario para accionar el equipo 0359
[Por la presente, MGA Entertainment (H.K.) Ltd, declara que este Bratz palo #SelfieSnaps cumple con los requisitos esenciales y otras disposiciones de la Directiva 1999/5/EC]
CAN ICES-3(B)/NMB-3(B) Fig. 4 1. Tire de la parte superior de la abrazadera del telfono hacia arriba y djela abierta. (Fig.4) 2. Coloque su telfono en el espacio determinado para ello, con la pantalla hacia usted. (Fig.4) 3. Asegrese de que el telfono queda bien sujeto y las pestaas estn colocadas como al principio (recolquelas en el caso de que fuera necesario) Cuidemos el medio ambiente!
El smbolo del cubo de basura con ruedas indica que el producto no debe desecharse con los residuos domsticos. Por favor, use los puntos de recogida o instalaciones de reciclaje cuando se deshaga del artculo. NO trate las pilas viejas como basura domstica. Llvelas a un centro de reciclaje. DE ALTER: 5+ JAHRE NL
#SelfieSnapsTM Selfie-Stab
#SelfieSnaps Stick
-
LEEFTIJD 5+ JAAR 539650E4C, 539667E4C BEAUFSICHTIGUNG DURCH EINEN ERWACHSENEN ERFORDERLICH. 539650E4C, 539667E4C TOEZICHT DOOR EEN VOLWASSENE WORDT AANBEVOLEN. INHALT A. 1 Bratz Selfie-Stab mit Lippenaufsatz B. 1 Bratz CloeTM Puppe mit Mode C. 1 Bratz JadeTM Puppe mit Mode F. 1 Smartphone (fr die Puppe) H. Fernbedienung D. 1 Paar Schuhe E. 1 Paar Ohrringe G. 1 Smartphone-Hlle (fr die Puppe) WICHTIGER HINWEIS:
Groe, dicke oder aufwendige Handyschutzhllen mssen mglicherweise entfernt werden, bevor du das Telefon in der Halterung befestigst. Sobald das Telefon angebracht wurde, berprfen, ob es sicher in der Halterung sitzt, bevor Fotos damit gemacht werden. INHOUD A. 1 Bratz #SelfieSnaps-stick met lippentoevoeging B. 1 Cloe-pop met outfit E. 1 paar oorbellen G. 1 smartphonehouder (voor pop) F. 1 smartphone (voor pop) C. 1 Jade-pop met outfit H. Afstandsbediening D. 1 paar schoenen A. H. B. E. C. E. 4. Die Flgelschraube ffnen und das Telefon in den gewnschten Neigungswinkel bringen. Dann die Schraube wieder festziehen. (Siehe Abb. 5) Abb. 5 FLGELSCHRAUBE A. B. E. Abb. 6 H. E. C. D. D. CLOE 539650 F. D. G. JADE 539667 F. G. Die Abbildungen dienen nur der Veranschaulichung und knnen von dem tatschlichen Inhalt abweichen. EINLEGEN DER BATTERIE IN DIE KABELLOSE FERNBEDIENUNG Sollte die Batterie in der kabellosen Fernbedienung ausgetauscht werden mssen, sollte ein Erwachsener eine neue Knopfzelle einlegen. Und so funktioniert es:
1. Das Gert ausschalten (auf OFF). 2. Mit einem Kreuzschlitzschraubenzieher (nicht enthalten) die Schraube auf der Rckseite der Fernbedienung entfernen und die Batteriefachabdeckung aufschieben. (Siehe Abb. 1) 3. Die alte Knopfzelle herausnehmen und sachgerecht entsorgen. 4. Eine (1) neue Knopfzelle CR2032, nicht enthalten, in der angegebenen Polrichtung (+/-) einlegen. (Siehe Abb. 2) 5. Die Batteriefachabdeckung wieder ber das Batteriefach schieben, bis sie in Position einrastet und dann die Schraube festziehen. BATTERIEFACHAB-
DECKUNG EIN/AUS-
SCHALTER N E B E H C S I BATTERIE Abb. 1 Abb. 2 RCKSEITE iOS-KNOPF ANDROID-
KNOPF VORDERSEITE Abb. 3 LITHIUM-
KNOPFZELLE, 3 V RCKSEITE SYNCHRONISIEREN DER KABELLOSEN FERNBEDIENUNG MIT DEINEM SMARTPHONE Bevor du deine Fernbedienung benutzen kannst, muss sie mit deinem iPhone oder Android-Smartphone synchronisiert werden. Und so funktioniert es:
1. Nachdem die Batterie eingelegt wurde, den EIN/AUS-Schalter der Fernbedienung auf ON (EIN) schieben. (Siehe Abb. 1) Die LED-Betriebsanzeige beginnt zu blinken. 2. Aktiviere die kabellose Fernbedienungsfunktion an deinem Smartphone, indem du auf EINSTELLUNGEN gehst und auf Bluetooth tippst und dann auf AB shutter 3 unter Gertenamen. Die Fernbedienung synchronisiert sich in wenigen Sekunden mit deinem Smartphone. 3. Die integrierte Kamera-App deines Smartphones ermglicht es dir jetzt, Fotos zu machen, indem du bei einem iPhone auf den greren Knopf der Fernbedienung und bei Android-Gerten auf den kleineren Knopf drckst. WICHTIGER HINWEIS:
Sollte die integrierte Kamera-App nicht mit der kabellosen Fernbedienung funktionieren, ldst du die Camera 360 App aus dem Google Play Store herunter. Suchbegriff: Camera 360. KOMPATIBILITT
-APP 360 iOS KAMERA KAMERA KAMERA 360 App INTEGRIERTE KAMERA Die kabellose Fernbedienung ist mit iOS 6.0 oder neuer und Android 4.3 oder neuer kompatibel. KOMPATIBILITTSLISTE iPhone 4/4s/5/5s/5c iPad 3/2 iPad mini iPad mit Retina Display iPod Touch 4. Generation oder neuer Samsung Galaxy S2 / S3 /S4+
Note 1, Note 2, Note 3+
Tab 2, Note 8,10.1+
Moto X /Nexus 4,5,7+
Xiaomi 1A, 2A, 3+
Sony Xperia S/4.3 HTC Neuestes und X+
Andere Android Smartphones ANBRINGEN DES SMARTPHONES IN DER SELFIE-HALTERUNG 360 iOS
* Die Gertenamen sind Warenzeichen ihrer jeweiligen Inhaber. KEINE NUTZUNG ANDROID KAMERA KAMERA 360 iOS 360 iOS Abb. 4 1. Den oberen Teil der Smartphone-Halterung nach oben ziehen und die Halterung offen halten. (Siehe Abb. 4) 2. Das Telefon in dem eingezeichneten Bereich so anbringen, dass der Bildschirm nach auen zeigt. (Siehe Abb. 4) 3. Die Smartphone-Halterung loslassen und berprfen, dass das Telefon sicher in Position sitzt, bevor du weitermachst. (Gegebenenfalls das Telefon neu ausrichten.) 5. Den Stab mit einer Hand in der Nhe der Kamera-Halterung festhalten, mit der anderen Hand am Ende des Stabs. Dann den Stab in entgegengesetzte Richtungen drehen, um den Teleskopteil des Stabs zu lsen. 6. Den Teleskopteil wie gewnscht ausziehen. Dann die Enden des Stabs in entgegengesetzte Richtungen drehen, um ihn festzustellen. (Der Stab lsst sich von ca. 22 cm bis 57 cm ausziehen.) 7. Arrangiere dein Selfie-Motiv und drcke auf die Fernbedienung, um das Foto zu schieen. WICHTIGE HINWEISE Vor Benutzung des Selfie-Stabs bitte Informationen zu gesetzlichen oder rtlichen Nutzungsbeschrnkungen einholen. Die kabellose Fernbedienung nach dem Spielen immer ausschalten
(OFF), um die Batterie zu schonen. KEIN Wasser oder Feuchtigkeit jeglicher Art mit der Fernbedienung in Berhrung kommen lassen. Das Haar der Puppen NICHT mit Wasser und/oder Seife waschen. Das Haar der Puppen NICHT mit einem Fhn trocknen oder Hitze jeglicher Art aussetzen, da dies das Haar unwiderruflich schdigt. SICHERHEITSHINWEISE ZU BATTERIEN Fr optimalen Betrieb und lngere Lebensdauer werden Alkali-Batterien empfohlen. Nur den fr das Produkt empfohlenen oder einen gleichwertigen Batterietyp verwenden. Batterien sollten von einem Erwachsenen ausgetauscht werden. Die Batterien in der angegebenen Polrichtung (+/-) einlegen. Keine alten und neuen Batterien zusammen einlegen. Immer alle Batterien zur gleichen Zeit auswechseln. Keine Alkali-, Standard- (Zink-Kohle-) Batterien oder Akkus (Nickel-
Cadmium-Zellen) miteinander kombinieren. Die Anschlussklemmen nicht kurzschlieen. Um ein Auslaufen der Batterien und Schden am Produkt zu vermeiden, sollten die Batterien aus dem Produkt herausgenommen werden, wenn es voraussichtlich lngere Zeit nicht benutzt wird. Keine Batterien zusammen mit Akkus einlegen. Akkus mssen vor dem Aufladen aus dem Produkt entnommen werden. Das Aufladen der Akkus muss unter Aufsicht eines Erwachsenen durchgefhrt werden. Nicht versuchen, normale Batterien aufzuladen. Alte und verbrauchte Batterien umgehend aus dem Produkt entfernen. Alte und verbrauchte Batterien ordnungsgem entsorgen und nicht vergraben, verbrennen oder ber den Hausmll entsorgen. FCC-KONFORMITT BITTE BEACHTEN: Dieses Gert ist getestet worden und erfllt die Grenzwerte fr digitale Gerte der Klasse B, entsprechend Teil 15 der FCC-Vorschriften. Diese Grenzwerte wurden festgelegt, um einen vernnftigen Schutz gegen gefhrliche Strungen bei huslichen Installationen zu bieten. Dieses Gert erzeugt, benutzt und strahlt Hochfrequenzsignale aus und kann, wenn es nicht entsprechend der Anleitung installiert oder benutzt wird, Strungen im Funkverkehr verursachen. Es besteht jedoch keine Garantie, dass es nicht zu Strungen bei bestimmten Gertekonstellationen kommen kann. Sollte dieses Gert Strungen beim Radio- oder Fernsehempfang verursachen, was Sie berprfen knnen, indem Sie das Gert aus- und wieder einschalten, wird der Verbraucher gebeten, zu versuchen, die Strung durch eine der folgenden Manahmen zu beheben:
Die Empfangsantenne neu ausrichten oder an einem anderen Ort aufstellen. Den Abstand zwischen dem Gert und dem Empfnger vergrern. Das Gert an einer Steckdose eines Stromkreislaufs anschlieen, an dem der Empfnger nicht angeschlossen ist. Lassen Sie sich vom Hndler oder einem erfahrenen Radio/Fernsehtechniker beraten. Dieses Gert entspricht Teil 15 der FCC-Vorschriften. Der Betrieb unterliegt folgenden zwei Bedingungen:
(1) Dieses Gert darf keine gefhrlichen Strungen verursachen und
(2) das Gert muss auch solche Strungen akzeptieren, die eine Beeintrchtigung des Betriebs zur Folge haben. Achtung: Um sicherzustellen, dass das Gert weiterhin die Vorschriften erfllt, drfen keine Vernderungen oder Modifikationen daran vorgenommen werden, die nicht ausdrcklich von der fr die Kompatibilitt verantwortlichen Partei genehmigt wurden, da sonst die Betriebserlaubnis fr den Benutzer erlschen kann. 0359
[Hierbei erklrt MGA Entertainment H.K. Ltd., dass der Bratz
#SelfieSnapsTM Selfie-Stab den grundlegenden Voraussetzungen und anderen relevanten Bestimmungen der Direktive 1999/E/EC entspricht. CAN ICES-3 (B)/NMB-3(B) Umweltschutz ist Ehrensache!
Dieses Produkt ist mit dem Symbol fr die selektive Entsorgung von elektrischer Ausrstung versehen (WEEE). Das heit, dass dieses Produkt der EU Direktive 2002/96/EC entsprechend entsorgt werden muss, um die entstehenden Umweltschden zu minimieren. Weitere Informationen erhalten Sie bei Ihrer lokalen oder regionalen Behrde. Aus diesem selektiven Entsorgungsprozess ausgeschlossene elektronische Produkte stellen wegen der Prsenz gefhrlicher Substanzen eine Gefahr fr die Umwelt und die Gesundheit dar. D. F. CLOE 539650 G. F. G. JADE 539667 De illustraties zijn uitsluitend ter referentie. Het getoonde kan afwijken van de daadwerkelijke inhoud. BATTERIJEN PLAATSEN IN DE DRAADLOZE AFSTANDSBEDIENING Als de batterij van de draadloze afstandsbediening leeg is, moet een volwassene een nieuwe knoopcelbatterij plaatsen. Ga als volgt te werk:
1. Zet het apparaat UIT. 2. Gebruik een kruiskopschroevendraaier (niet inbegrepen). Verwijder de schroef in het klepje van het batterijdeksel aan de achterkant van het apparaat en schuif het klepje open. (Afb. 1.) 3. Verwijder de oude knoopcelbatterij en gooi deze volgens de geldende regels weg. 4. Plaats n (1) CR2032 knoopcelbatterij en zorg ervoor dat (+) en (-) in de juiste richting wijzen, zoals wordt vermeld. (Afb. 2.) 5. Schuif het klepje weer terug op het batterijvak tot het op zijn plek klikt en bevestig de schroef. KLEPJE BATTERIJVAK AAN/UIT-
SCHAKELAAR T N A K R E T H C A BATTERIJ Afb. 1 Afb. 2 ACHTERKANT iOS-KNOP ANDROID-
KNOP Afb. 3 LITHIUM-
BATTERIJ 3V VOORKANT ACHTERKANT DE DRAADLOZE AFSTANDSBEDIENING EN JE TELEFOON KOPPELEN Voordat je de draadloze afstandsbediening kunt gebruiken, moet je deze koppelen met je iOS- of Android-telefoon. Ga als volgt te werk:
1. Schuif na plaatsing van de batterij de AAN/UIT-schakelaar op het apparaat naar AAN. (Afb. 1). De LED-indicator begint te knipperen. 2. Activeer de draadloze afstandsfunctie op je telefoon door naar INSTELLINGEN te gaan, op 'Bluetooth' te tikken en vervolgens op 'AB schutter 3' in je apparaatlijst. Het apparaat wordt automatisch binnen een paar seconden gekoppeld met je telefoon. 3. Met de in je telefoon ingebouwde camera-app kun je nu foto's maken door op de grotere knop voor iOS-telefoons of op de kleinere knop voor Android-telefoons te drukken. BELANGRIJKE OPMERKING:
Als de ingebouwde camera-app niet werkt met het draadloze apparaat, kun je de gratis 'Camera 360'-app downloaden uit de Google Play Store. Trefwoord om te zoeken: 'Camera 360'. COMPATIBILITEIT CAMERA 360 APP CAMERA CAMERA INGEBOUWDE CAMERA-APP De draadloze afstandsbediening is compatibel met iOS 6.0 of hoger en Android 4.3 of hoger :
COMPATIBILITEITSLIJST*
iPhone 4/4s/5/5s/5c iPad 3/2 iPad mini iPad met Retina Display iPod Touch 4e generatie of nieuwer Samsung Galaxy S2 / S3 /S4+
Note 1, Note 2, Note 3+
Tab 2, Note 8,10.1+
Moto X /Nexus 4,5,7+
Xiaomi 1A, 2A, 3+
Sony Xperia S/4.3 HTC Newest en X+
Andere Android-telefoons
* Apparaatnamen zijn handelsmerken van de betreffende eigenaren. WORDT NIET GEBRUIKT ANDROID CAMERA CAMERA 360 iOS 360 iOS 360 iOS 360 iOS DE TELEFOON IN DE SELFIE-KLEM PLAATSEN Afb. 4 1. Til de bovenkant van de telefoonklem omhoog en hou de klem open. (Afb. 4.) 2. Plaats je mobiel op de beschikbare plek zoals weergegeven met het scherm naar buiten gericht. (Afb. 4.) 3. Laat de telefoonklem los en zorg ervoor dat je mobiel goed op zijn plek zit voordat je verdergaat. (Plaats de telefoon opnieuw indien nodig.) BELANGRIJKE OPMERKING:
het is mogelijk dat je grote, massieve en uitgebreide telefoonhoezen eerst moet verwijderen voordat je telefoon in de selfieklem past. Zodra de telefoon is geplaatst, controleer je of hij goed en veilig vast zit in de klem voordat je foto's maakt. Afb. 5 VLEUGELSCHROEF 4. Draai de vleugelschroef los en pas de telefoon aan naar de gewenste hoek. Draai de schroef dan weer aan. (Afb. 5.) Afb. 6 5. Hou de stick met n hand bij de cameraklem aan het einde van de stick vast en draai dan in tegengestelde richting om de stick uit te kunnen schuiven. 6. Verleng de stick naar wens en draai de uiteinden van de stick weer in tegengestelde richting om vast te maken. (De stick kan worden uitgeschoven van 22 cm tot 57 cm. ) 7. Poseer voor je selfie en druk op de knop op de bluetooth-
afstandbediening om een foto te maken. BELANGRIJKE OPMERKINGEN Pas op voor eventuele lokale of locatiebeperkingen die van kracht zijn voordat je de selfiestick gebruikt. Zet de draadloze afstandsbediening altijd UIT na gebruik om batterijvermogen te besparen. Zorg dat er GEEN water of vloeistoffen van welke aard dan ook in contact komen met de draadloze afstandsbediening. Was het haar van de pop NIET met water en/of zeep. Droog het haar van de pop NIET met een haardroger en stel het haar niet bloot aan extreme hitte. Het raakt dan onherstelbaar beschadigd. VEILIG GEBRUIK VAN BATTERIJEN Gebruik alkalinebatterijen voor betere prestaties en een langere levensduur. Gebruik uitsluitend batterijen van het aanbevolen type. Batterijen dienen te worden vervangen door een volwassene. Let op de polariteit bij het plaatsen van batterijen (+ en -). Gebruik geen nieuwe en oude batterijen samen. Gebruik geen gewone (koolstof-zink), alkaline of oplaadbare (nikkel-
cadmium) batterijen samen. Pas op voor kortsluiting, maak geen contact tussen beide polen. Verwijder batterijen als het speelgoed langere tijd niet wordt gebruikt. Dit voorkomt lekken en beschadigingen. Gebruik geen oplaadbare en niet-oplaadbare batterijen samen. Verwijder oplaadbare batterijen uit het speelgoed voordat ze worden opgeladen. Oplaadbare batterijen mogen enkel worden opgeladen onder toezicht van een volwassene. Laad niet-oplaadbare batterijen niet weer op. Verwijder lege batterijen uit het speelgoed. Gooi batterijen niet in het vuur, batterijen kunnen lekken of exploderen. FCC-VERKLARING OPMERKING: dit product is getest en voldoet aan de voorschriften voor een digitaal apparaat van klasse B, overeenkomstig Deel 15 van de FCC-
regels. Deze voorschriften zijn opgesteld om een redelijke bescherming te bieden tegen schadelijke storing bij gebruik binnenshuis. Dit product genereert en gebruikt radiofrequentie-energie, of kan deze uitstralen. Als het product niet volgens de instructies wordt genstalleerd en gebruikt, kan het schadelijke storingen voor radiocommunicaties veroorzaken. Er kan echter geen garantie worden gegeven dat bepaalde installaties storingsvrij zullen functioneren. Als het product wel storing veroorzaakt in radio- of televisieontvangst (wat u kunt vaststellen door het apparaat uit en aan te zetten) raden wij de gebruiker aan de storing proberen op te heffen door een of meer van de onderstaande maatregelen:
Richt de ontvangstantenne op een andere manier of plaats deze ergens anders. Vergroot de afstand tussen het product en de radio of televisie. Sluit het apparaat aan op een stopcontact van een andere groep dan de groep waarop de radio of televisie is aangesloten. Vraag advies aan de verkoper of aan een ervaren radio-/televisietechnicus. Dit apparaat is in overeenstemming met Deel 15 van de FCC-regels. Voor het gebruik moet worden voldaan aan twee voorwaarden:
(1) dit product mag geen schadelijke interferentie veroorzaken, en (2) dit product moet elke ontvangen interferentie aanvaarden, met inbegrip van interferentie die de werking negatief zou kunnen benvloeden. Waarschuwing: wijzigingen die niet zijn goedgekeurd door degene die verantwoordelijk is voor de naleving van alle eisen kunnen ertoe leiden dat de gebruiker het recht verspeelt om dit product te mogen gebruiken. 0359
[Wij, MGA Entertainment (H.K.) Ltd, verklaren dat deze Bratz
#SelfieSnaps Stick voldoet aan essentile vereisten en andere provisies van Directive 1999/5/EC.]
CAN ICES-3(B)/NMB-3(B) Zorg voor het milieu!
Het kliko-pictogram betekent dat dit product niet bij het gewone huis-, tuin- en keukenafval mag worden gezet. Geef het product af bij een chemokar of breng het naar een KCA-inzamelpunt. Gooi lege batterijen niet weg samen met het gewone huis-, tuin- en keukenafval. Breng ze naar een chemokar of een inzamelpunt voor klein chemisch afval. Please keep this manual as it contains important information. The preferred method of contact for Customer Service is through our e-mail contact form at www.mgae.com www.bratz.com 2015 MGA Entertainment, Inc. BRATZILLAZ, BRATZ and BRATZ BOYZ are trademarks of MGA in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of MGA. 16300 Roscoe Blvd., Van Nuys, CA 91406 U.S.A.
(800) 222-4685 MGA Entertainment UK Ltd. 50 Presley Way, Crownhill, Milton Keynes, MK8 0ES Bucks, UK
+ 0800 521 558 Printed in China Authorized Representative of the Manufacturer:
MGA Entertainment UK Ltd. Bewaar deze handleiding goed, er staat belangrijke informatie in. Als u contact wilt opnemen met onze klantenservice, adviseren wij u hiervoor dat u kunt vinden op www.mgae.com het e-mailformulier te gebruiken www.bratz.com 2015 MGA Entertainment, Inc. BRATZILLAZ, BRATZ and BRATZ BOYZ is een handelsmerk van MGA in de Verenigde Staten en andere landen. Alle logos, namen, personages, kenmerken, afbeeldingen, slogans en het verpakkingsbeeldmateriaal zijn eigendom van MGA. MGA Entertainment Netherlands BV/ Belgium BVBA Sloterweg 303A-I, 1171 VC Badhoevedorp, NL 31 (0) 20 354 80 34 Gedrukt in China Gemachtigd vertegenwoordiger van de producent:
MGA Entertainment UK Ltd. Gardez ce manuel, car il renferme des renseignements importants. La mthode de contact prfre pour le service la clientle est notre formulaire de contact par e-mail/courriel www.mgae.com www.bratz.com 2015 MGA Entertainment, Inc. BRATZILLAZTM/MC, BRATZ/MD et BRATZ BOYZ/MD sont des marques de commerce de MGA aux tats-Unis et dans d'autres pays. Les logos, noms, personnages, ressemblances, images, slogans et modles d'emballages appartiennent MGA. 16300 Roscoe Blvd. , Van Nuys, CA 91406 U.S.A.
(800) 222-4685 Distribu en France par :
Splash Toys 18 Rue de la Cte Frileuse 27640 BREUILPONT France www.splash-toys.com Imprim en Chine Mandataire du fabricant : MGA Entertainment UK Ltd. Diese Anleitung fr mgliche Rckfragen bitte aufbewahren. Sie enthlt wichtige Informationen. Bei Fragen wenden Sie sich bitte ber unsere Internetseite www.MGAE.com an unseren Kundendienst!
www.bratz.com 2015 MGA Entertainment, Inc. BRATZILLAZ, BRATZ and BRATZ BOYZ ist in den USA und anderen Lndern ein Warenzeichen von MGA. Alle Logos, Namen, Charaktere, hnlichkeiten, Bilder, Claims und das Erscheinungsbild der Verpackung sind in Besitz von MGA. Vertrieben durch:
Zapf Creation AG Mnchrdener Str. 13 D-96472 Rdental, Germany
+49 (0) 9563 7251-0 Gedruckt in China Bevollmchtigter Vertreter des Herstellers:
MGA Entertainment UK Ltd. Conserve este manual ya que contiene informacin importante. El mtodo preferido para contactar nuestro servicio al consumidor es a travs de nuestra pgina www.mgae.com www.bratz.com 2015 MGA Entertainment, Inc. BRATZILLAZ, BRATZ and BRATZ BOYZ es una marca registrada de MGA en los EE.UU y otros pases. Todos los logos, nombres, personajes, aspectos distintivos, imgenes, eslganes y embalajes son propiedad exclusiva de MGA. Distribuidor para Espaa: Bandai Espaa S.A. Avda. del Vidrio, 18-20 19200 Azuqueca de Henares
(Guadalajara) Espaa C.I.F.: A-19159573 Impreso en China Representante autorizado del fabricante:
MGA Entertainment UK Ltd. MD 0615-1-E4C
1 | Internal Photos | Internal Photos | 146.59 KiB | September 07 2015 |
INTERTEK TESTING SERVICE Equipment Photographs Model : 539629 (FCC), 539629C3 (IC)
(Internal) Report No.: 15050265HKG-001 FCC ID: LU9539629 IC: 4504A-539629 INTERTEK TESTING SERVICE Report No.: 15050265HKG-001 Equipment Photographs Model : 638541 (FCC) 638541E4C(TX) (IC)
(Internal) FCC ID: LU9539629 IC: 4504A-539629
1 | External Photos | External Photos | 83.91 KiB | September 07 2015 |
INTERTEK TESTING SERVICE Equipment Photographs Model : 539629 (FCC), 539629C3 (IC) Report No.: 15050265HKG-001
(External) FCC ID: LU9539629 IC: 4504A-539629
1 | Letter of Agency | Cover Letter(s) | 27.51 KiB | September 07 2015 |
Letter of Agency an officer of MGA Entertainment (HK) Ltd. do hereby authorize Intertek Testing Services (Mr. Terry Chan / Koo Wai Ip / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice."
| further certify that no party (as defined in 1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. BE -te US) 25 ore\ June of 2015
=i) Signature Kevin Woo Printed Name Quality Director mii) Remark: The person who signs this au ization letter must be the grantee contact of record the Grantee Code data base. Dee 2013
~ub
1 | Technical Description | Operational Description | 1.33 MiB | September 07 2015 |
Technical Description The brief circuit description is listed as below:
1) U1 acts as a 2.4GHz IC (BK3231). 2) X1 acts as a Crystal for U1. Antenna Type: Internal antenna Antenna Gain: 0dBi Nominal rated field strength: 85.2 dBV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB BK3231 Datasheet Sep-2014 BK3231 Bluetooth HID SoC Datasheet Preliminary Specification Beken Corporation 3A,1278KeyuanRd,Zhangjiang High-Tech Park Pudong New Distrinct,Shanghai,201203, China Tel: (86)21 51086811 Fax: (86)21 60871277 This document contains information that may be proprietary to, and/or secrets of, Beken Corporation. The contents of this document should not be disclosed outside the companies without specific written permission. Disclaimer: Descriptions of specific implementations are for illustrative purpose only, actual hardware implementation may differ. 2013 Beken Corporation Proprietary and Confidential Page 1 of 1 BK3231 Datasheet Sep-2014 Table of Contens 1 General Description ............................................................................................................................ 3 2 Features................................................................................................................................................ 3 3 Pin Information ................................................................................................................................... 3 4 Memory Orgnization .......................................................................................................................... 8 5 Interrupt and Clock Unit ................................................................................................................... 8 6 MFC ................................................................................................................................................... 11 7 GPIO .................................................................................................................................................. 12 ADC .................................................................................................................................................... 14 8 UART ................................................................................................................................................. 16 9 I2C-SMBus ........................................................................................................................................ 18 10 11 SPI ...................................................................................................................................................... 20 12 PWM Timer ....................................................................................................................................... 22 13 Watch dog .......................................................................................................................................... 23 14 Electrical Specifications .................................................................................................................... 24 15 Package Information ........................................................................................................................ 25 15.1 QFN 7X7 56PIN: ........................................................................................................................ 25 15.2 QFN4X4 32PIN: ......................................................................................................................... 26 16 Application Schematic ...................................................................................................................... 27 16.1 QFN7X7 56PIN: ......................................................................................................................... 27 16.2 QFN4X4 32PIN: ......................................................................................................................... 27 17 Order Information ............................................................................................................................ 28 2013 Beken Corporation Proprietary and Confidential Page 2 of 2 BK3231 Datasheet Sep-2014 1 General Description The BK3231 chip is a highly integrated single-chip Bluetooth3.0HID device. It integrates the high-performance transceiver, rich features baseband processor, and Bluetooth HID profile. The FLASH program memory makes it suitable for customized application, and it is also possible for other Bluetooth aplication such as SPP controller. 2 Features
Operation voltage from 2.0V to 3.6 V
Bluetooth 3.0compliant
-86dBm sensitivity for 1 Mbps mode and 2 dBm transmit power
HID v1.0, and other light profile by request
16 MHz crystal reference clock
56-pin QFN 7mmx7mm package for keyboard
I2C, SPI and UART interface
10-bit Battery monitor ADC
Three timers with PWM mode Figure 1 Block Diagram 3 Pin Information The next diagram shows QFN56 format for the full functions usage.It can be used as keyboard TX part and total 35 GPIO available. Other package type such as QFN40 or even QFN32 is also available by request with less GPIO. 2013 Beken Corporation Proprietary and Confidential Page 3 of 3 BK3231 Datasheet Sep-2014 Figure 2BK3231QFN56Pin Assignment Figure 3BK3231QFN32Pin Assignment 2013 Beken Corporation Proprietary and Confidential Page 4 of 4 BK3231 Datasheet Sep-2014 Table 1BK3231 QFN56 Pin Description PIN Name Pin Function Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 P44 NC PPROG MBISTEN P47 P04 P11 XTALN XTALP VCCXTAL VCCRF RFP VDDPA NC VCCIF P00 P01 P40 P30 P31 P32 P33 P34 P35 P45 P46 CLK32K TCK VCCDIG VDDSPI Digital I/O NC Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Analog output Analog input Power supply Power supply RF port Power output(LDO output) NC Power supply Digital I/O Digital I/O Digital I/O Digital I/O or analog input Digital I/O or analog input Digital I/O or analog input Digital I/O or analog input Digital I/O or analog input Digital I/O or analog input Digital I/O Digital I/O Analog input Digital I/O Power supply Analog output VDDDSP Analog output P27 P41 P02 P10 P14 Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O General I/O Not connected FLASH programming selection Test enable General I/O General I/O, or MOSI for SPI General I/O, or input for external active low interrupt Oscillator output Oscillator input 3 V supply 3 V supply RF input and output 1.5 V supply to PA Not connected 3 V supply General I/O General I/O General I/O General I/Oor input of ADC0 General I/Oor input of ADC1 General I/Oor input of ADC2 General I/Oor input of ADC3 General I/Oor input of ADC4 General I/Oor input of ADC5 General I/O General I/O Clock 32 kHz input JTAG pin 3 V supply Power output, connected with decoupling CAP Power output, connected with decoupling CAP General I/Oor enable for PWM1 General I/O General I/O General I/Oor input for external interrupt 0, active low General I/O 2013 Beken Corporation Proprietary and Confidential Page 5 of 5 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 BK3231 Datasheet Sep-2014 P36 P37 P03 PRSTN TMS TDI RST TDO P12 P13 P05 P06 P07 P20 P21 P22 P23 P24 P25 P26 Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O General I/O, or input of ADC6 General I/O, or input of ADC7 General I/O Active low whole chip reset JTAG pin JTAG pin JTAG reset JTAG pin General I/O General I/O General I/O, or MISO for SPI General I/O, or SCK for SPI General I/O, or chip select for SPI General I/O, or input for UART General I/O, or output for UART General I/O General I/Oor clock for SMBUS (I2C) General I/Oor data I/O for SMBUS (I2C) General I/O General I/O, or enable for PWM0 Table 2BK3231 QFN32 Pin Description PIN Name Pin Function Description MBISTEN P04 P11 Digital I/O Digital I/O Digital I/O XTALN XTALP VCCRF RFP VDDPA VCCIF P00 P01 P30 P31 P32 P33 CLK32K VCCDIG VDDSPI Analog output Analog input Power supply RF port Power output(LDO output) Power supply Digital I/O Digital I/O Digital I/O or analog input Digital I/O or analog input Digital I/O or analog input Digital I/O or analog input Analog input Power supply Analog output Test enable General I/O, or MOSI for SPI General I/O, or input for external active low interrupt Oscillator output Oscillator input 3 V supply RF input and output 1.5 V supply to PA 3 V supply General I/O General I/O General I/Oor input of ADC0 General I/Oor input of ADC1 General I/Oor input of ADC2 General I/Oor input of ADC3 Clock 32 kHz input 3 V supply Power output, connected with decoupling CAP 2013 Beken Corporation Proprietary and Confidential Page 6 of 6 BK3231 Datasheet Sep-2014 VDDDSP Analog output P27 P10 PRSTN NC VSS P05 P06 P07 P20 P21 P26 VSS PPROG Digital I/O Digital I/O Digital I/O NC Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Power output, connected with decoupling CAP General I/Oor enable for PWM1 General I/Oor input for external interrupt 0, active low Active low whole chip reset Not connected Connected to GND General I/O, or MISO for SPI General I/O, or SCK for SPI General I/O, or chip select for SPI General I/O, or input for UART General I/O, or output for UART General I/O, or enable for PWM0 Connected to GND FLASH programming selection 19 20 21 22 23 24 25 26 27 28 29 30 31 32 2013 Beken Corporation Proprietary and Confidential Page 7 of 7 BK3231 Datasheet Sep-2014 Table 1 The Memory Orgnization Start Address End Address Total (Bytes) Flash 0x00000000 0x0003FFFF 256K SRAM 0x00400000 0x00403FFF 16K 4 Memory Orgnization Program Memory Data Memory AHB Peripheral APB Peripheral Bluetooth Transceiver 0x00900000
(MFC) 0x00800000 ICU 0x00920000 UART 0x00930000 IIC 0x00940000 SPI 0x00950000 GPIO 0x00960000 WDT 0x00970000 TIME 0x00980000 ADC 0x009a0000 By setting PPROG-pin to 1, the internal FLASH program memory can be written with four GPIO as a SPI slave. To access the FLASH memory with internal program, please refer to MFC section for detail. 5 Interrupt and Clock Unit There are three main clock sources: 32.768 kHz XTAL, 16 MHz XTAL and 48 MHz DPLL. The MCU clock can be selected from one of them, while the peripherals use only one constantly. 2013 Beken Corporation Proprietary and Confidential Page 8 of 8 BK3231 Datasheet Sep-2014 Table 2 Clock Register Mapping - 0x00920000 Register Address Name Description 0x0[1:0]
hfsrc 0x1[7:1]
0x1[8]
core_clk_divid core_clk_pwd 0x3[8:0]
UART clk's Setting 0x4[8:0]
I2C clk's Setting 0x5[8:0]
PWM clk's Setting 0x6[8:0]
WDT clk's Setting 0x8[8:0]
SPI clk's Setting 0x9[8:0]
ADC clk's Setting 0: 32.768 kHz 1: 16 MHz XTAL clock 2: 48MHz DPLL 3: 0 MHz MCU clock divided ratio: 0~127 1: Power down MCU clock 0: Active MCU clock Same definition as MCU clock setting by REG1[8:0]
The UART main clock is 16 MHz Same definition as MCU clock setting by REG1[8:0]
The I2C main clock is 16 MHz Same definition as MCU clock setting by REG1[8:0]
The PWM main clock is 32.768 kHz Same definition as MCU clock setting by REG1[8:0]
The PWM main clock is 32.768 kHz Same definition as MCU clock setting by REG1[8:0]
The SPI main clock is 16 MHz Same definition as MCU clock setting by REG1[8:0]
The ADC main clock is 16 MHz The ARM968E-S supports two interrupt level. The FIRQ has higher priority than nIRQ. In the BK3231, all peripheral interrupts are nIRQ except the Bluetoothtransceiver. All interrupt can be enabled, disabled, and cleared. There is two low power modes: MCU stop and deep sleep, and any interrupt can be configured to be a wake up source to let MCU exit low power mode. Table 3 Interrupt Register Mapping - 0x00920000 Register Address Name Description int_enable[9:0]
Interrupt enable control bit [1]
0xa[9:0]
0xa[10]
0xa[11]
irq_enable fiq_enable Enable ARM nIRQ Enable ARM FIRQ External interrupt 0 configuration bit[2]: Enable contro bit bit[1:0]
3posedge trigger 0xa[14:12]
ext_int0_cfg[2:0]
2013 Beken Corporation Proprietary and Confidential Page 9 of 9 BK3231 Datasheet Sep-2014 2negedge trigger 1high level trigger 0low level trigger External interrupt 1 configuration bit[2]: Enable contro bit bit[1:0]
3posedge trigger 2negedge trigger 1high level trigger 0low level trigger Wakeup enable control bit [1]
Interrupt clear control bit [1]
Interrupt status control bit [1]
Enable GPIO[31:0] as wake up source from deep sleep mode Enable GPIO[39:32] as wake up source from deep sleep mode Write16'h3231 to enable the IC enter deep sleep mode Enable the GPIO interrupt [2]
Enable GPIO be wake up source from MCU stop mode Clear the GPIO interrupt GPIO interrupt status 0xa[17:15]
ext_int1_cfg[3:0]
int_wakena[9:0]
int_clear[9:0]
int_status[9:0]
gpio_deep_waken[31:0]
gpio_deep_waken[39:3 2]
gpio_int_enable gpio_int_wakena 0x11[31:16]
gpio_deep_sleep 0x13[2]
0x13[3]
Note 1:
The 10 interrupt source is defined as follows. gpio_int_clear gpio_int_status 0xa[27:18]
0xb[9:0]
0xc[9:0]
0x10[31:0]
0x11[7:0]
0x13[0]
0x13[1]
bit[0]
bit[1]
bit[2]
bit[3]
bit[4]
bit[5]
bit[6]
bit[7]
bit[8]
bit[9]
External Interrupt 0 External Interrupt 1 PWM timer 0 PWM timer 1 PWM timer 2 I2C Interrupt UART Interrupt Bluetooth transceiver interrupt SPIInterrupt ADCInterrupt Note 2:
This single bit is combined logic of 40 GPIOs. To clear the single bit status, user should firstly clear the individual bit of the status of each GPIO interrupt in GPIO module 2013 Beken Corporation Proprietary and Confidential Page 10 of 10 BK3231 Datasheet Sep-2014 6 MFC To avoid unintentional FLASH operation, serial strict steps must be executed before write or erase the FLASH. For example, if you want to write the FLASH, the next steps should be executed. 1. Set the right register to point to the space you want to operate firstly 2. Then write the configuration data and address 3. Write the right byte to Remove the protect condition 4. Write the right key number sequentially 5. Set the control bit to start the operation 6. Wait until the start bit change to zero 7. Set the control bit to protect the flash space for avoiding wrong operation The read and erase process is similar to the write process In the period of FLASH operation, The ARM will enter into IDLE state until the current operation finished. You should erase the corresponding FLASH address firstly before program any data into it. Table 4 Interrupt Register Mapping - 0x00800000 Addrees Name Description 0x00[15:0] KEYWORD 0x01[0]
START 0x01[1]
ERROR Write 0x58A9 and then 0xA958 to enable FLASH operation; After once operation finished, it will be disabled automatically write 1 to start operate flash; it will be cleared by hardware after the operation finished Error happened when =1; write 0 to clear it. Dont write 1 to this bit. 0x01[4:2] CONTROL 000: read 001: write 010: sector erase 011: block erease 111: chip erase others : error happen; START will be cleared now 0x01[6:5] SPACE control 00:main space 01:NVR space 10:RDN space 11:main space 0x02[15:0] ADDR Opearation address 2013 Beken Corporation Proprietary and Confidential Page 11 of 11 0x03[31:0] DATA 0x04[7:0] DATA 0x05[7:0] DATA 0x06 DATA 0x07 DATA BK3231 Datasheet Sep-2014 Data write into flash or the data read from flash FLASH W/E protect register 0(must =0xa5) FLASH W/E protect register 2(must =0xc3) FLASH W/E protect register 3 Write any data into this address will disable W/E, and cant enable except RESET happened. Default enable after power on. FLASH W/E protect register 4 Wite any data into this address will disable ARM directly write fucntion, and can enable except RESET happened. Default enable after power on. 7 GPIO There are eight groups total forty general purpose input and output ports. All the four port can be used for general I/O with selectable direction for each bit, or these lines can be used for specialized functions. When the port is configured as general I/O, the detail function of them can be set by register as follows. Table 5 GPIO0 Register Mapping - 0x00960000 GPIO0 Input Bits GPIO0 Output Bits Input Enable, High Active GPIO_Input GPIO_Output GPIO_Input_Ena GPIO_Output_Ena Output Enable, Low Active GPIO_Pull_Mode GPIO_Pull_Ena GPIO_Fun_Ena Input_Monitor 0x0[0]
0x0[1]
0x0[2]
0x0[3]
0x0[4]
0x0[5]
0x0[6]
0x0[7]
GPIO1 to GPIO39 has the same definition but with address from 0x1 to 0x27. Any GPIO can be interrupt source, and each GPIO has its own control bit as follows. 1: PullUp, 0: PullDown GPIO0 Pull Up/Down Enable GPIO0 2nd Function Enable View GPIO0's Inputs Value Table 6 GPIO Interrupt Control Register Mapping - 0x00960000 0x30 0x31 0x32 INT_EN[31:0]
GPIO[31:0] interrupt enable control bit (1) INT_EN[39:32]
GPIO[39:32] interrupt enable control bit (1) INT_LEV[31:0]
GPIO[31:0] interrupt trigger level 1: High; 0: Low 2013 Beken Corporation Proprietary and Confidential Page 12 of 12 BK3231 Datasheet Sep-2014 INT_LEV[39:32]
GPIO[39:32] interrupt trigger level 1: High; 0: Low INT_STA[31:0]
GPIO[31:0] interrupt status INT_STA[39:32]
0x35 Most GPIO have special function mapping, and the GPIO will be used as the special functional pin when the contro bit (bit 6 GPIO_Fun_Ena) is enabled. GPIO[39:32] interrupt status Table 7 GPIO Functinal Mapping PPMODE=1 GPIO Mode 2nd function Mode spi_prog_clk spi_miso spi_cs GPIO08 spi_mosi 0x33 0x34 GPIO Pin Name GPIO00 GPIO01 GPIO02 GPIO03 GPIO04 GPIO05 GPIO06 GPIO07 GPIO09 GPIO10 GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 GPIO16 GPIO17 GPIO18 GPIO19 GPIO20 GPIO21 GPIO22 GPIO23 GPIO24 GPIO25 GPIO26 GPIO27 GPIO28 General I/O General I/O General I/O General I/O General I/O General I/O bb_tx_bit Out General I/O bb_rx_bit Out General I/O General I/O General I/O SPI MOSI General I/O General I/O SPI MISO General I/O SPI SCK SPI CS General I/O External Interupt 0 External Interrupt 1 UART CTS(Out) UART RTS(In) General I/O UART_RX General I/O General I/O UART_TX General I/O I2C SCLK General I/O General I/O I2C SDA General I/O PWM0 Output General I/O PWM1 Output General I/O General I/O ADC0 General I/O ADC1 ADC2 General I/O General I/O ADC3 ADC4 General I/O General I/O GPIO bit number GPIO00 GPIO01 GPIO02 GPIO03 GPIO04 GPIO05 GPIO06 GPIO07 GPIO10 GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 GPIO16 GPIO17 GPIO20 GPIO21 GPIO22 GPIO23 GPIO24 GPIO25 GPIO26 GPIO27 GPIO30 GPIO31 GPIO32 GPIO33 GPIO34 2013 Beken Corporation Proprietary and Confidential Page 13 of 13 BK3231 Datasheet Sep-2014 GPIO29 GPIO30 GPIO31 GPIO32 GPIO33 GPIO34 GPIO35 GPIO36 GPIO37 GPIO38 GPIO39 ADC5 ADC6 ADC7 General I/O General I/O General I/O General I/O General I/O General I/O General I/O General I/O General I/O General I/O General I/O GPIO35 GPIO36 GPIO37 GPIO40 GPIO41 GPIO42 GPIO43 GPIO44 GPIO45 GPIO46 GPIO47 8 ADC A 10bits SAR ADC is integrated in the BK3231. Total 8 channels can be selected used for ADC transfer. The ADC supports continue mode and single transfer mode, and the sample rate can be 1kHz to 32kHz. In single transfer mode, it will generate interrupt every time after transform. The ADC havefour work mode, they are sleep mode, single mode, software mode and continue mode.
Sleep mode(mode==00): ADC is power down now
Single mode(mode==01): The system will enter sleep mode when transfer is done and waiting MCU to read the result. You should write mode=1 again for another transfer.
Controlled by software(mode==10): In this mode,interrupt will be triggered after transfer and wait MCU to read. The interrupt will be cleared after MCU read, and then the transfer will start again.
Continue mode(mode==11):The ADC will work at the sample rate set by register. The sample rate can be calculated by the next formula:
F_sample = input ADC clock/(2^(ADC_CLK_RATE+2) / 36(or 18))
The highest sample rate is 32k The local interrupt flag of ADC need not be cleared by software;it will be set after tranform and be cleared after the result has been read out. But the ADC INTstored ICU should be cleared after the ADC INT service finished. Therange of input voltage is from 0v to 1.5V. If the input voltage more than 1.5V, a resistor can be added to decrease the input voltage like the next diagram. 2013 Beken Corporation Proprietary and Confidential Page 14 of 14 BK3231 Datasheet Sep-2014 Note: There are eight GPIO can be ADC input. When used as this:
Voltage=data[9:0]/448; The saturate voltage is 1.5 volt. Table 8 ADC Register Mapping 0x009A0000 Address Name Description 0x0[1:0]
ADC_MODE 0x0[2]
ADC_EN 0x0[5:3]
ADC_CHNL 0x0[6]
FIFO_EMPTY 0x0[7]
ADC_BUSY 0x0[9:8]
ADC_SAMPLE_RATE 0x0[10]
ADC_CLK_WAIT ADC operation mode 00: Sleep mode 01: Single mode10: Software mode 11: Continuous mode Enable ADC Channel selection ADC FIFO empty flag The ADC conversion resultis stored at a FIFO with 4 depths ADC busy flag Sample rate setting 2b00: adc_clk/36 2b01: adc_clk/18 2b10: reserved 2b11: Reserved For ADC mode 1 and mode 2, it will wait 4 (0) or 8(1) ADC_CLK cycle to start coversion after actie ADC clock 0x0[18:16] ADC_CLK_RATE ADC clock divided ratio 000: 4 001: 8 010:16 011: 32 100: 64 101: 128 110: 256 111: 512 ADC_DATA 0x1[9:0]
NOTE: For detecting the voltage higher than 1.5V, an additional resistor need be added to attenuate the voltage. ADC conversion result 2013 Beken Corporation Proprietary and Confidential Page 15 of 15 BK3231 Datasheet Sep-2014 There is a 100k resistor R2 in the chip, you can use it to attenuate the voltage with an outer resistor R1. The usage method is decribed below. REGpart XVRregister 0x0910000 description enable or disable the attenuation resistor in the SAR ADC 1:enable0:disable thechannelnumberwheretheresistoris enabled Reg07[12:10]
XVRregister Reg07[13]
0~7 note 100k Table 9 ADC attenuation Register 9 UART The UART interface has 128 bytes FIFO for both TX and RX. It will generate interrupt request when there is risk or event of FIFO underflow or overflow. For the RX, it will generate interrupt if found parity bit check error or stop bit check error. When the UART RX line goes from idle state (HIGH) to active state (LOW) for a set UART clock cycle, it will generate wake up interrupt to activate MCU clock. Table 10 UART Register Mapping 0x00930000 0x0[0]
UART_TX_ENABLE UART TX enable (1) or disable (0) 0x0[1]
UART_RX_ENABLE UART RX enable (1) or disable (0) 0x0[2]
UART_IRDA 0UART frame structure 1IRDA frame structure UART data bit width 005 bit 016 bit 107 bit 118 bit 0x0[5]
UART_PAR_EN Has(1) or not(0)the parity check bit 0x0[4:3] UART_LEN[1:0]
0x0[6]
UART_PAR_MODE Odd(0) or even(1) parity check STOP bit length 01 bit 0x0[7]
UART_STOP_LEN 12 bits 2013 Beken Corporation Proprietary and Confidential Page 16 of 16 BK3231 Datasheet Sep-2014 0x0[20:8] UART_CLK_DIV[12:0]
UART_TX_FIFO_EN Clear TX FIFO (1) 0x0[21]
0x0[22]
UART_RX_FIFO_EN 0x1[7:0]
TX_FIFO_THRESHOLD
[7:0]
0x1[15:8]
0x2[7:0]
0x2[15:8]
RX_FIFO_THRESHOL D[7:0]
TX_FIFO_COUNT[FIFO _WD-1:0]
RX_FIFO_COUNT[FIFO _WD-1:0]
UART band rate setting Baud rate=UART_CLK/(UART_CLK_DIV+1) UART_CLK_DIV should be greater than 4 Clear RX FIFO (1) When the bytes in TX FIFO is less than this threshold, it will give need write interrupt When the bytes in RX FIFO is greater than this threshold, it will give need read interrupt Number of bytes in the TX FIFO Number of bytes in the RX FIFO 0x3[7:0] UART_DOUT 0x3[15:8] UART_DIN UART TX data UART RX data 0x4[0]
0x4[1]
0x4[2]
0x4[3]
0x4[4]
0x4[5]
0x4[6]
0x5[0]
0x5[1]
UART_TX_FIFO_NEED _WRITE_MASK UART_RX_FIFO_NEED _READ_MASK UART_RX_OV_MASK UART_RX_PAR_ERR_ MASK UART_RX_STOP_ERR _MASK Enable TX FIFO need write interrupt Enable RX FIFO need read interrupt Enable RX overflow interrupt Enable RX parity check error interrupt Enable RX stop bit check error interrupt TX_STOP_END_MASK Enable TX finished interrupt UART_RXD_WAKE_PU LSE_MASK UART_TX_FIFO_NEED _WRITE_WAKEUP UART_RX_FIFO_NEED _READ_WAKEUP 0x5[2]
UART_RX_OV 0x5[3]
UART_RX_PAR_ERR Enable RX wake up pulse detected interrupt TX FIFO need write interrupt; Will be cleared after interrupt condition disappeared RX FIFO need read interrupt; Will be cleard after interrupt condition disappeared RX overflow bit error interrupt status Write 1 to clear RX parity bit error interrupt status Write 1 to clear 2013 Beken Corporation Proprietary and Confidential Page 17 of 17 BK3231 Datasheet Sep-2014 0x5[4]
UART_RX_STOP_ERR 0x5[5]
0x5[6]
TX_STOP_END_INT UART_RXD_WAKE_PU LSE 0x6[6:0]
FLOW_CTL_LOW_CNT
[6:0]
0x6[14:8]
FLOW_CTL_HIGH_CN T[6:0]
RX stop bit error interrupt status Write 1 to clear UART TX finished interrupt status Write 1 to clear UART wake up pulse interrupt status Write 1 to clear UART CTS and RTS flow control rx_fifo low counter threshhold:
when rx_fifo_counter < flow_ctl_low_cnt:
CTS is set;meaning that UART is ready to receive. UART CTS and RTS flow control rx_fifo high counter threshhold:
when rx_fifo_counter > flow_ctl_high_cnt:
CTS is clear;meaning that UART is not ready to receive. UART CTS and RTS flow control enable UARTRX waken up pad time threshold and low pulse RX threshold UARTTX waiting time after sending wake up signal 0x6[16]
0x7[9:0]
0x7[19:1 0]
0x7[20]
0x7[21]
FLOW_CTL_EN UART_RXD_WAKE_CN T UART_TXD_WAIT_CN T UART_RXD_WAKE_EN UARTRX waken up pad enable (1) UART_TXD_WAKE_EN UART low pulse tx enable (1) 10 I2C-SMBus The I2C I/O interface is a two-wire, bi-directional serial bus. The I2C is compliant with the System Management Bus Specification, version 1.1, and compatible with the I C serial bus. Reads and writes to the interface by the system controller are byte oriented with the I2C interface autonomously controlling the serial transfer of the data. Data can be transferred at up to 1/10th of the system clock as a master or slave (this can be faster than allowed by the I2C specification, depending on the system clock used). A method of extending the clock-low duration is available to accommodate devices with different speed capabilities on the same bus. The I2C interface may operate as a master and/or slave, and may function on a bus with multiple masters. The I2C provides control of SDA (serial data), SCL (serial clock) generation and synchronization, arbitration logic, and START/STOP control and generation. 2013 Beken Corporation Proprietary and Confidential Page 18 of 18 BK3231 Datasheet Sep-2014 It is assumed the reader is familiar with the I2C-Bus Specification -- Version 2.0 and system Management Bus Specification -- Version 1.1. The bi-directional SCL (serial clock) and SDA (serial data) lines must be connected to a positive power supply voltage through a pull-up resistor or similar circuit. Every device connected to the bus must have an open-drain or open-collector output for both the SCL and SDA lines, so that both are pulled high (recessive state) when the bus is free. Table 11 I2C Register Mapping 0x00940000 0x0[31]
ENSMB SMBus Enable 0x0[30]
0x0[29]
0x0[28]
INH SMBUS slave mode enable (0) SMBFTE Enable bus idle detection (1) Should be enabled for master mode SMBTOE SCL low time out detection enable (1) 0x0[27:26]
SMBCS 0x0[25:16]
0x0[15:6]
SLV_ADDR FREQ_DIV 0x0[5:3]
SCL_CR 0x0[2:0]
IDLE_CR 0x1[31:16]
Reserved SMBus clock source selection 00: Timer 0 overflow 01: Timer 1 overflow 10Timer 2 overflow 11Internal clock (Divided ratio=FREQ_DIV SMBUS slave address SMBUS main clock divided ratio SCL active low time out threshold, is power(2, SCL_CR) SMBUS idle detection threshold, is power(2, IDLE_CR) 0x1[15]
0x1[14]
0x1[13]
0x1[12]
0x1[11]
0x1[10]
0x1[9]
0x1[8]
BUSY SMBus busy (1) MASTER MASTER mode (1) or slave mode (0) TXMODE SMBus TX status (1) or RX status (0) ACKRQ SMBus ACK (1) or not (0) at receive mode ADDR_MATCH Address match ok (1) or not (0) STA STO ACK SMBus start condition enable (1) Write: SMBus stop condition send enable (1) Read: SMbus stop condition detected (1) Write: SMBus ACK send enable (1) Read: SMBus ACK received (1) 2013 Beken Corporation Proprietary and Confidential Page 19 of 19 0x1[7:6]
INT_MODE BK3231 Datasheet Sep-2014 Interrupt mode For Sender 00,01,10,11: Data in TX FIFO is less than 1/4/8/12 byte For Recevier:
00,01,10,11Data in RX FIFO is greater than 12/8/4/1 TX FIFO Full flag TXFIFO_FULL RXFIFO_EMPTY RX FIFO empty flag ARBLOST Multi-master competition failed (1) SCL_TMOT SCL low time out detected (1) SMBusinterrupt flag Reserved SI Reserved SMB_DAT SMBUS TX data (Write) or RX data (Read) 0x1[5]
0x1[4]
0x1[3]
0x1[2]
0x1[1]
0x1[0]
0x2[31:8]
0x2[7:0]
11 SPI The Enhanced Serial Peripheral Interface (SPI) provides access to a flexible, full-duplex synchronous serial bus. SPI can operate as a master or slave device in both 3-wire or 4-
wire modes, and supports multiple masters and slaves on a single SPI bus. The slave-
select (NSS) signal can be configured as an input to select SPI in slave mode, or to disable Master Mode operation in a multi-master environment, avoiding contention on the SPI bus when more than one master attempts simultaneous data transfers. NSS can also be configured as a chip-select output in master mode, or disabled for 3-wire operation. Additional general purpose port I/O pins can be used to select multiple slave. There are four pins for SPI interface. The master-out, slave-in (MOSI) signal is an output from a master device and an input to slave devices. It is used to serially transfer data from the master to the slave. This signal is an output when SPI is operating as a master and an input when SPI is operating as a slave. Data is transferred most-significant bit first. When configured as a master, MOSI is driven by the MSB of the shift register in both 3- and 4-
wire mode. The master-in, slave-out (MISO) signal is an output from a slave device and an input to the master device. It is used to serially transfer data from the slave to the master. This signal is an input when SPI is operating as a master and an output when SPI is operating as a slave. Data is transferred most-significant bit first. The MISO pin is placed in a high-
impedance state when the SPI module is disabled and when the SPI operates in 4-wire mode as a slave that is not selected. When acting as a slave in 3-wire mode, MISO is always driven by the MSB of the shift register. 2013 Beken Corporation Proprietary and Confidential Page 20 of 20 BK3231 Datasheet Sep-2014 In slave mode, the data on MOSI are sampled at the middle of period of every bit. In master mode, the data on MISO are sampled at the last clock period to acquire the maximal setup time. Table 12 SPI Register Mapping 0x00950000 Address 0x0[23]
0x0[22]
Name SPIEN MSTEN 0x0[21]
CKPHA 0x0[20]
CKPOL 0x0[18]
BIT_WDTH 0x0[17:16]
NSSMD 0x0[15:8]
0x0[7]
0x0[6]
0x0[5]
0x0[4]
0x0[3]
0x0[2]
SPI_CKR RXINT_EN TXINT_EN RXOVR_EN TXOVR_EN RXFIFO_CLR TXFIFO_CLR 0x0[1]
RXINT_MODE Description Enable SPI (1) Master mode (1) or slave mode(0) SPI clock phase 0Sample data at first edge of SCK 1Sample data at second edge of SCK SPI clock polarity SCK is high (1) or low (0) at idle stat 0 Bit width 08bit 116bit Slave mode 003-wires mode 014-wires mode 1x4-wires mode single master SPI clock divided ratio RX interrupt enable TX interrupt enable RX overflow interrupt enable TX overflow interrupt enable Clear RX FIFO Clear TX FIFO RX interrupt setting when number of data in the RX FIFO is greater than 0 (0) or 8 (1) TX interrupt setting when number of data in the TX FIFO is 0 (0) or less than 8 (1) SPI busy flag Slave seleted flag when NSS is 0 RX overflow flag TX overflow flag Master collision detected flag RX interrupt flag TX interrupt flag RX FIFO full flag 0x0[0]
0x1[15]
0x1[14]
0x1[12]
0x1[11]
0x1[10]
0x1[9]
0x1[8]
0x1[3]
0x1[2]
0x1[1]
TXINT_MODE SPIBUSY SLVSEL RXOVR TXOVR MODF RXINT TXINT RXFIFO_FULL RXFIFO_EMPTY RX FIFO empty flag TXFIFO_FULL TX FIFO full flag 2013 Beken Corporation Proprietary and Confidential Page 21 of 21 BK3231 Datasheet Sep-2014 TXFIFO_EMPTY TX FIFO empty flag 0x2[15:0]
SPI_DAT SPI data entry Write to TX FIFO or read from RX FIFO 0x1[0]
12 PWM Timer There are three timers, two of which is 16 bit and can be works as PWM waveform generator, while the other one is 20bit timer. The PWM waveform can be output to GPIO to drive external device such as LED. Table 13 PWM Timer Register Mapping 0x00980000 Address 0x0[15:0]
0x0[31:16]
0x1[15:0]
0x1[31:16]
0x2[0]
0x2[1]
0x2[3:2]
0x2[4]
0x2[5]
0x2[7:6]
0x2[11:8]
0x2[12]
0x2[13]
0x3[19:0]
0x3[20]
0x3[21]
Namae Description PT0_CntMid[15:0]
PWM 0 Active high duration PT0_CounTo[15:0]
PWM 0 or counter period PT1_CntMid[15:0]
PWM 1 Active high duration PT1_CounTo[15:0]
PWM 1 or counter period PT0_Mode PT1_Mode PT0_Enable PT1_Enable PT_Divid[3:0]
PT0_Int_flag PT1_Int_flag PT2_Counto[19:0]
PT2_Enable PT2_Int_flag 0: Timer mode 1: PWM Mode 0: Timer mode 1: PWM Mode Reserved PWM timer 0 enable (1) PWM timer 1 enable(1) Reserved PWM timer pre-divide ratio PWM timer 0 interrupt flag, write 1 to clear PWM timer 1 interrupt flag, write 1 to clear Timer 2 period Timer 2 enable (1) Timer 2 interrupt flag,write 1 to clear 2013 Beken Corporation Proprietary and Confidential Page 22 of 22 BK3231 Datasheet Sep-2014 13 Watch dog The watch dog is used to reset the whole chip when the firmware runs out of order. Table 14 Watch Dog Register Mapping 0x00970000 Address Namae Description 0x0[23:16]
WDKEY[7:0]
0x0[15:0]
WD_PERIOD[15:0]
Watch dog key To clear watch dog counter, please write 0x5A, and then write 0xA5 Watch dog timer period 1: ~0.6 ms Maximum: ~38.8 second 2013 Beken Corporation Proprietary and Confidential Page 23 of 23 BK3231 Datasheet Sep-2014 14 Electrical Specifications Table 2RF Characteristics Name Parameter (Condition) Min Max Typi cal Unit Com ment Operating Condition Voltage Temperature Digital input Pin High level Low level Digital output Pin High level (IOH=-0.25mA) Low level(IOL=0.25mA) Normal condition Deep sleep Sleep mode 1 (MCU stopped) Sleep mode 2 (MCU 32 kHz) Active RX Active TX @ 2 dBm output power Normal RF condition Operating frequency Crystal frequency Air data rate Transmitter Output power Modulation 20 dB bandwidth Out of band emission 2 MHz Out of band emission 3 MHz Current at -40dBm output power Current at -30dBm output power Current at -25dBm output power Current at -10dBm output power Current at -5dBm output power Current at 0dBm output power Current at 2dBm output power Receiver VCC TEMP VIH VIL VOH VOL IVDD IVDD IVDD IVDD IVDD FOP FXTAL RFSK PRF PBW PRF1 PRF2 IVDD IVDD IVDD IVDD IVDD IVDD IVDD Max Input 1 E-3 BER RXSENS IIP3 1 E-3 BER sensitivity IIP3, Pin=-63 dBm; Punwant=-39 dBm; f0=2f1-f2, f2-f1=3 MHz or 4 MHz or 5 MHz Co-channel C/I ACS C/I 1MHz ACS C/I 2MHz ACS C/I 3MHz ACS C/I Image channel ACS C/I 1 MHz adjacnet to image channel C/ICO C/I1ST C/I2ND C/I3RD C/I1STI C/I2NDI 2.0
-20 3.0
+27 3.6
+80 V C VCC-0.3 VSS VCC- 0.3 VSS VCC+0.3 V V VSS+0.3 VCC V VSS+0.3 V 2 10 100 30 22 16 1 0 1 NA NA NA NA NA NA 22
-86
-18 2480 5 11 0
-30
-40
-9
-20 2400
-40
-20
-40 0 uA uA uA mA mA MHz MHz Mbps dBm MHz dBc dBc mA mA mA mA mA mA mA dBm dBm dBm dB dB dB dB dB dB 2013 Beken Corporation Proprietary and Confidential Page 24 of 24 BK3231 Datasheet Sep-2014 15 Package Information 15.1 QFN 7X7 56PIN:
2013 Beken Corporation Proprietary and Confidential Page 25 of 25 15.2 QFN4X4 32PIN:
BK3231 Datasheet Sep-2014 2013 Beken Corporation Proprietary and Confidential Page 26 of 26 BK3231 Datasheet Sep-2014 16 Application Schematic 16.1 QFN7X7 56PIN:
16.2 QFN4X4 32PIN:
X1 16MHz 1 3 1 2 3 4 C2 15pF 2 4 XTALN XTALP C6 15pF H17 3 2 1 3 2 1 1 2 3 4 H11 1 2 3 4 X T _ T R A U X R _ T R A U 6 2 P 7 0 P 6 0 P 5 0 P C16 1uF G O R P P 1 3 1 3 1 3 S2 2 4 S3 S4 2 4 2 4 Enter Volume+
Volume-
MBISTEN P04 P11 XTALN XTALP VCCRF RFP VDDPA MBISTEN P04 P11 XTALN XTALP VCCRF 1 2 3 4 5 6 7 8 RFP VDDPA VSS NC PRSTN P10 P27 VDDDSP VDDSPI VCCDIG 24 23 22 21 20 19 18 17 NC PRSTN P10 P27 1 2 1 3 JP5 S1 2 4 VDDDSP VDDSPI VCCDIG C12 1uF C10 1uF C7 0.3pF L1 4.3nH C22 2.2pF L3 1nH C13 0.8pF L2 1nH C17 NL C8 0.8pF L5 4.7nH C14 1uF BPF Network RF Matching 1 2 X2 32K768 2 3 1 3 0 3 9 2 8 2 7 2 6 2 5 2 S S V 6 2 P 1 2 P 0 2 P 7 0 P 6 0 P 5 0 P G O R P P U1 BK3231_QFN4_32_4X4 F I C C V 0 0 P 1 0 P 0 3 P 1 3 P 2 3 P 3 3 P K 2 3 K L C 9 0 1 1 1 2 1 3 1 4 1 5 1 6 1 F I C C V 0 0 P 1 0 P 0 3 P 1 3 P 2 3 P 3 3 P k 2 3 k l c 3 2 1 3 2 1 3 2 1 3 2 1 H15 H16 TP2 TP3 2013 Beken Corporation Proprietary and Confidential Page 27 of 27 BK3231 Datasheet Sep-2014 17 Order Information Part number Package Packing Minimum Order Quantity BK3231QB BK3231Q32 QFN 4mmx4mm 32-Pin QFN7x7-56Pin Tape Reel Tape Reel 3000 10K 2013 Beken Corporation Proprietary and Confidential Page 28 of 28
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-07-09 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2015-07-09
|
||||
1 | Applicant's complete, legal business name |
MGA Entertainment (HK) Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0018148171
|
||||
1 | Physical Address |
Suite 301, 3/F, Chinachem Golden Plaza, No.77 Mody Road, Tsim Sha Tsui East
|
||||
1 |
Suite 301, 3/F, Chinachem Golden Plaza
|
|||||
1 |
Kowloon
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@intertek.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
LU9
|
||||
1 | Equipment Product Code |
539629
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J******** C******
|
||||
1 | Title |
QA Director
|
||||
1 | Telephone Number |
852-2******** Extension:
|
||||
1 | Fax Number |
852-2********
|
||||
1 |
j******@mgae.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
T**** C********
|
||||
1 | Physical Address |
2/F Garment Centre
|
||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
852 2******** Extension:
|
||||
1 | Fax Number |
852 2********
|
||||
1 |
t******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
T****** C********
|
||||
1 | Physical Address |
2/F Garment Centre
|
||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
852 2******** Extension:
|
||||
1 | Fax Number |
852 2********
|
||||
1 |
t******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bratz Selfie Stick- Cloe/ Jade | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
J****** H******
|
||||
1 | Telephone Number |
85221********
|
||||
1 | Fax Number |
85278********
|
||||
1 |
j******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC