Micro Blast R/C Racer AQEG fa #227279?
Micro Blast R/C Racer (MBR) is a fully functional pocket-sized A/C racers that can be raced indoors, on open ground or on a track, and allow another players with different frequency. REMOTE CONTROL START PLAYING AND CONTROL 1. Switch the power to OFF. * Install the batteries into Remote Control and External Unscrew with a Phillios head screwdriver & remove the Charger as in the section of Battery Installation. battery cover on the Remote Control. Insert 2 AA (1.5V) Alkaline batteries in the proper direction, as indicated inside the battery compartment. Switch the Remote Contro! power to "ON". Replace the battery cover & tighten screw securely. Press FORWARD button to drive the racer moving _ Switch the nower to "ON". forwards. Charge the racer as in the section of Racer Charging. Hold the controller in a comfortable position in your hands.
- Press BACKWORD button to dive the racer moving EXTERNAL CHARGER backwards. 1. Unscrew with a Phillips head screwdriver & remove the Press LEFT button to tum left while the racer is moving. battery cover on the handset. Press RIGHT button to tum right while the racer is moving. 2. Insert 2 AAA (1.5V) Alkaline batteries in the proper direction, When the racer is run out of battery power, charge the as indicated inside the battery compartment. racer as In the section of Racer Charging. 3. Replace the battery cover & tighten screw securely. RACER CHARGING SAFE BATTERY PRECAUTIONS Place the Racer onto the Extemal Charger charging Do not dispose the batteries in fire; batteries may leak or connector. explode. * Press CHANGE button once for cnarging around 43
* Different types of batteries or new and used batteries are seconds. not to be mixed. | * The charging Indicator on the charger will tum on only
* Only batteries of the same or equivalent type as when the racer is charging. recommended are to be used. - OO Take out the Racer from the charging connector and place The supply terminals are not to De short-circuited. it on the ground for playing. Non-rechargeable batteries are not to be recharged. 8 playing Rechargeable batteries are only to be charged under adult supervision. , Rechargeable batteries are to be removed from the toy IMPORTANT:
e MONMIMICATIONC NOT ALITHORIZEN RY THE before being charged. When not in use for an extended time, remove batteries to prevent possible leakage. Batteries are to be inserted with the correct polarity. Exhausted battaries are to be removed from thie toy:
MANUFACTURER MAY VOID USERS AUTHORITY TO OPERATE THIS DEVICE. EMISSIONS OR INTERFERENCE OF SURROUNDING ELECTRONIC EQUIPMENT MAY AFFECLOPERATING...__-
Batteries should be replaced by adult. CAUTION:
* Do not use rechargeable batteries for the Remote rg Control and the Extemal Charger. Cee) . Not suitable for children unders years. iF THERE IS NO FUNCTION BETWEEN THE NOTES:
REMOTE CONTROL AND THE RACER: This equipment has been tested and found to comply with
* Make sure you have tumed ON the Remote Control. limits for a Class B digital device, pursuant to Part 15 of the
* Check that the batteries are inserted property. FCC Rules. These fimits are designed to provide reasonable ee a ted bnttn tae uth mau alvalinea hatterac protectinn aoains? harmful intarferanca in a residential eee eee eee Move the remote control above the racer to find the best communication between the Remote control and the Racer. (The control range will be around 6 to 8 feet.) 1E THE EYTERANAIL CHARGER HAS NO installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, these is no nuarantaa that intarferance wil not occur in a particular GNARGING FUNCTION:
installation. HT Ins equipment does Cause narmmul imererence
* Check that the batteries are inserted property. to radio or television reception, which can be determined by
* Replace the old batteries with new alkaline batteries. turning the equipment off and on, the user is encouraged to Check that the racer is placed properly. try to correct the interference by one or more of the following Check that the racer has contacted with the charging measures:
contact plates. * Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
| | * Connect the equipment into an outlet on a circuit different Please keep th is instruction sheet since It contains from that to which the receiver is connected. eee | * Consult the dealer or an experienced radio/TV technician for help TM & 2002 MGA Entertainment All Riahte Recerved. we NAA _ ff 16730 Schoenbom St., North Hills, CA 91343 USA
(800) 222-4685 POU ET Nt i bt