all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 3.62 MiB | ||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Operational Description | |||||||
1 | Schematics | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 3.62 MiB |
TM 2.4GHZ CORDLESS TELEPHONE WITH CALL WAITING CALLER ID INSTALLATION AND OPERATING GUIDE IMPORTANT: To receive Caller ID information on incoming telephone calls, you must subscribe to the Caller ID service provided by your local telephone company; there is a fee for this service and it may not be available in all areas. Warranty NTP-6323 TABLE OF CONTENTS MGA 1 Year Limited Warranty This limited warranty sets forth all MGA responsibilities regarding your product. There are no other expressed or implied warranties from MGA Warranty Service Provided If you purchased the telephone new from a retail vendor, MGA warrants the telephone against defects in material and workmanship for a period of one(1) year from the original date of purchase. This warranty is in lieu of all other expressed warranties. This warranty begins when you purchase the telephone and continues for one (1) year unless you sell or rent the telephone, in which event the warranty stops. MGA disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose, as of the date of one year from your original purchase of the telephone. MGA assumes no responsibility for any special, incidental, or consequential damages. This warranty gives you specific legal rights and you may have other rights, which vary from state to state. Some states do not allow the exclusion or limitation of special, incidental or consequential damages or limitations on how long a warranty lasts, so the above exclusion and limitation may not apply to you. Warranty service not provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, the affixing of any attachment not provided by MGA with the telephone and or loss of parts. This warranty is voided in the event any unauthorized person opens, alters or repairs the telephone. All MGA products being returned for repair must be suitably packaged. Telephone companies use different types of equipment and offer various types of services to customers. MGA does not warrant that this telephone is compatible with the type of equipment of any particular telephone company or the services provided by it. What to do for warranty service During the first thirty (30) days, a defective product is eligible for over the counter exchange at the retailer from whom it was purchased. After thirty (30) days the defective product should be returned to the authorized service center. Important Safety Instructions ....................2 FCC Regulations....................................3-4 Battery Cautionary Instructions
............5 NTP-6323 Parts Checklist
......................6 Location of Controls and Features.......7-10 Handset ..............................................7-8 Base ..................................................9-10 Choosing a Location .................................11
..... ..... Telephone Setup.................................12-14 Connecting the Base ...........................12 Tone/Pulse Switch ...............................13 1 Handset Volume ..................................13 Battery Installation...................................14 Battery Duration ...................................14 When the Battery Needs Charging ......14 When to Purchase a New Battery Pack ........................................14 Basic Displays.........................................15 Basic Operation ..................................16-17 Making Calls .........................................16 Receiving Calls.....................................16 Redialing..............................................17 Additional Options ..............................17 Settings.................................................18-24 Handset Settings...............................18-19 Changing the Language.........................19 Muting the First Ring On or Off..............20 Setting the Time and Date......................20 Setting the Ringer Level.........................21 Adjusting the Contrast............................21 Setting the Area Code...........................22 Changing the Flash Time......................22 Changing the Pause Time.....................23 Programming One-Touch Voice Mail Dialing..................................23 Deleting Message Waiting Indication...............................................24 Speed Dialing..............................25-29 Storing Phone Numbers..................25 Letter Table....................................26 Viewing the Phone Book................ 26 Making Calls From the Phone Book..............................................27 Editing a Stored Number.................27 Deleting a Stored Number...............28 Deleting All Stored numbers............28 Preferred Calls...............................29 Blocked Calls.................................29 Caller ID ............................................30-34 When You Receive a Call .....................30 Viewing the Caller ID List ....................30 Caller ID Displays ................................31 Caller ID with Call Waiting Service .......32 Storing Caller ID Records ....................32 Deleting Caller ID Records ..................33 Returning Caller ID Calls .....................34 Message Waiting ...................................35 Using One-Touch Voice Mail Dialing ....35 Other Features ......................................36 Using the Handset Finder (PAGE) ......36 Channel Changing ...............................36 Care and Maintenance............................37 Troub leshooting.......................................38 Glossary ...................................................39 Warranty...................................................40 40 1 IMPORTANT SAFETY INSTRUCTIONS GLOSSARY This symbol is to alert you to important operating or servicing instructions that may appear in the user's manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electrical shock. When using this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Use only with class 2 power source DC 9V 300mA. 4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use this product near water; for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 6. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 7. Slots and openings in the cabinet back or bottom are provided for ventilation. To protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in an enclosed environment unless proper ventilation is provided. 8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by animals or persons walking on it. 9. Do not overload wall outlets and extension cords as this can result in risk of fire or electrical shock. 10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electrical shock. Never spill liquid of any kind on the product. 11. To reduce the risk of electrical shock, do not disassemble this product. Instead take it to a qualified service person when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electrical shock when the appliance is subsequently used. 12. Unplug all cords and refer servicing to qualified service personnel under the following conditions:
A. When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust only those controls covered in the operating instructions. Improper adjustment of other controls may result in damage and require work by a qualified technician to restore the product to normal operation. 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use a telephone to report a gas leak in the vicinity of the leak. IF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING ADDITIONAL PRECAUTIONS SHOULD BE OBSERVED:
1. Use only the type and size of batteries specified in the user's manual. 2. Do not dispose of batteries in a fire; the cells may explode. Check with local codes for possible special disposal locations. 3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets and keys. The battery or conductor may overheat and cause burns. 5. Do not attempt to recharge the batteries with or identified for use with this product. The batteries may leak corrosive electrolyte or explode. 6. Do not attempt to rejuvenate the batteries provided with or identified for use with this product by heating them. Sudden release of the battery electrolyte may cause burns or irritation to eyes or skin. 7. When replacing batteries, all batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the discharged batteries. 8. When inserting the batteries into this product, the proper polarity or direction must be observed. Reverse insertion of batteries can cause charging, which may result in leakage or explosion. 9. Remove the batteries from this product if the product will not be used for a long period of time (several months or more) since during this time the batteries could leak, damage the product. 10. Discard "dead" batteries as soon as possible since they are more likely to leak in a product. 11. Do not store this product, or the batteries provided with or for identified use with this product, in high temperature areas. 12. If your product uses a rechargeable battery, charge the battery(ies) only in accordance with the instructions and limitation specified in the User Manual. SAVE THESE INSTRUCTIONS Useful Features and Terms PBX ( Private Branch Exchange) -- A small, central, privately owned, switching telephone system where a digit (like 9 ) must be dialed first in order to access an outside line. Calendar/Clock---- Visual display of date, day and time. Caller ID--Enables users to view name and number of callers. Contact your local telephone company to subscribe to Caller ID Service. Caller ID Log--- Stores up to 80 Caller ID entries. Call Timer--- Allows timing of phone conversations. Data/FAX Port--- Allows connection of a PC orFAX machine directly into the phone versus a wall outlet. Dial from Display ---One-button dialing from the Caller ID log. Display---The Liquid Crystal Display (LCD) shows clock and calendar, number dialed, low battery indicator, Caller ID information and call timer. Flash---A signal sent by the phone to the local telephone company supporting services such as call waiting. Message Waiting Indicator --- A visual indicator that there are new messages in your voice mail box. Requires FSK signaling by phone company. Contact your local telephone company to subscribe to Voice Mail Service. New Calls Indicator ---- A visual indicator that new calls have been received. Redial --- Performs single button dialing of last number dialed. Ringer Lever Control --- Permits adjustment of the ringer volume level. Speed Dialing ---- Allows programming of frequently dialed numbers so that they can be dialed with the two touch speed dial button (64 entries). Tone/Pulse Option--- Enables you to switch from pulse (rotary) to tone dialing. Volume Level Control ---- Permits volume adjustment of the handset and headset during a conversation. FSK type Signaling --- A signal used to turn on and off the message waiting indicator, can be sent by the telephone company with a ringing signal or without. 2 39 TROUBLESHOOTING FCC REGULATIONS No dial tone/phone will not dial out. Check that the AC power adapter is plugged into a working AC power outlet. Check all telephone cord connections or try another wall jack. Do a basic reset of the phone: Disconnect the phone from the wall and remove the battery. Leave for 30 minutes and then re-install as instructed by the manual. All the display segments stay on when the handset is in the base. Verify that the battery is properly installed. Remove the battery and clean the battery contacts using a pencil eraser. Can't hear the ring signal. Check the ringer volume controls; at the lowest level the ring may not be heard. While on a call, you hear another call on the line or experience radio frequency interference. Switch channels to a clear channel. Check the wiring for bad connections. Do not use this phone within 20 feet of a working microwave. The microwave produces frequencies in this range which may cause interference. This interference is normal for all 2.4GHz phones and should not be considered a product defect. The caller's name and/or phone number does not appear on the display. Make sure you have subscribed to Caller ID service (from local telephone company). Caller ID service may not work when the phone is connected to a Private Branch Exchange (PBX). The caller has requested that their phone number be suppressed from Caller ID service, or caller ID service is not available in their area. "Private" or
"OUT OF AREA" will appear on the display. You answered the call before Caller ID data was displayed, which usually occurs after the first ring. New Call/Message Waiting Indicator doesn't work properly. Make sure you have subscribed to voice mail compatible with "FSK" type signaling (check with your local phone company). Verify that both the "On" and
"Off" signals are activated. If your voice mail product from the local phone company does not support "FSK" signaling, you may use this feature as a New Call Indicator only. Can't receive or make phone calls. Make sure the phone is set to the correct type of service, either Tone or Pulse. Warning: Modifying or tampering with the telephone's internal components can cause a malfunction and might invalidate the telephone's warranty and void your FCC authorization to operate it. If the trouble is harming the telephone lines, the telephone company might ask you to disconnect the telephone until you have resolved the problem. As it complies with Part 68 of the FCC rules and the technical requirements for connection to telephone networks published by ACTA, your unit has been registered with the FCC. The FCC requires us to provide you with the following information:
1. Connection and use with the nationwide telephone network:
The FCC requires that you connect to a nationwide telephone network through a modular telephone outlet which is TIA/EIA-IS-968 compliant. It is USOC jack type RJ11C. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. Check with your local telephone com-
pany. 2. Notification to the telephone company:
FCC rules require that upon request you provide the following information to the phone company. A. The line (telephone number) to which you will connect the telephone equipment, and B. The Registration Number and Ringer Equivalence Number (REN). These numbers are found on the back or bottom of your telephone equipment. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have those entire devices ring when your telephone number is called. In most, but not all areas, the sum all RENs should be 5 or less. To determine the number of devices permitted in your area, contact your local telephone company. 3. Repair instructions:
If it is determined that your telephone equipment is malfunctioning, the FCC requires that it not be used and be unplugged from the modular outlet until the problem has been corr-
ected. Repairs to this telephone equipment can be made only by the manufacturer or its authorized agents, or by others who may be authorized by the FCC. Unauthorized repairs void registration and warranty. 4. Rights of the telephone company:
If your product is causing harm to the telephone network, the telephone company may temporarily discontinue your service. If possible, they will notify you in advance. But if advance notice isn't practical; you will be notified as soon as possible. You will be given the opportunity to correct the problem, and you will be informed of your right to file a co-
mplaint with the FCC. Your telephone company may make changes in its facilities, equi-
pment, operations or procedures that could affect the proper functioning of your teleph-
one equipment. If such changes are planned, you will be notified in advance. 5. This product is compatible with inductively coupled hearing aids. Note: This applies only if this product is equipped with a corded or cordless handset. 6. Programming/testing emergency numbers:
When programming emergency numbers and/or making test calls to emergency numbers A. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up. B. Perform such activities in the off-peak hours, such as early morning or late evening. 38 3 FCC REGULATIONS CARE AND MAINTENANCE INTERFERENCE INFORMATION: PART 15 OF FCC RULES Some telephone equipment generates and uses radio frequency energy which if not properly installed, may cause interference to radio and television reception. This unit has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in subpart J of Part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such inter-
ference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, when it's in use, the user is encouraged to try to correct the interference by one or more of the following measures:
A. Where it can be done safely, reorient the radio or TV receiving antenna. B. To the extent possible, relocate the television, radio, or other receiver with respect to the telephone equipment. C. If your telephone product runs on AC power, plug your product into an AC outlet that's not on the same circuit as the one used by the radio or television. Your NTP-6323telephone has been designed to give years of trouble-free service. It is a sensitive electronic instrument. To assure its longevity, please read the following maintenance instructions. 1. Keep the NTP-6323 away from heat as high temperatures can shorten the life of the electrical components and distort or melt its plastic parts. 2. The NTP-6323 should be kept free of dust and moisture. If it gets wet, wipe it dry immediately. Liquids can contain minerals that can corrode electronic circuits. 3. Handle your NTP-6323 gently and carefully. Dropping it can cause serious damage to circuitry, or the plastic case, which may result in malfunction. 4. Do not use any type of chemical or any abrasive powder to clean the cabinet. Use only mild detergents on a soft, damp cloth to clean the NTP-6323 telephone. 5. The NTP-6323 has built-in surge protection circuits that meet or exceed FCC requirements. However, an incident such as a lightning strike at or near the telephone lines, could cause serious damage. 6. If the NTP-6323 is installed in an area with frequent or severe electrical storms, it is suggested that the telephone be disconnected during these storms or that additional surge suppression equipment be added to the installation. 7. In the case of trouble with the telephone, do not attempt to repair the telephone yourself. It is the responsibility of users requiring service to report the need for service to our Service Department. They will make the necessary arrangements for repair or replacement. 4 37 OTHER FEATURES BATTERY CAUTIONARY INSTRUCTIONS Using the Handset Finder (PAGE) 1. Press on the base and the phone will beep. PAGE PAGE PM
NEW TOTAL If the handset is within range, it will beep until a key is pressed. 2. Press any key on the handset, or place the handset in the base to stop the page/find feature. Channel Changing If you are experiencing interference during a telephone call, press the key. The NTP-6323 will scan up to 40 channels and select the clearest one to provide the best possible reception. Del / Scan BATTERIES: CAUTION To reduce the risk of fire or injury to persons, read and follow these instructions:
For the cordless handset, use only a 3.6V600mAh Nickel Metal Hydride (Ni-MH) cordless telephone battery pack (included). Do not dispose of the batteries in a fire. The cells may explode. Check with local codes for possible special disposal instructions. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns. Do not attempt to rejuvenate the batteries identified for use with this product by heating them. Sudden release of the battery electrolyte may occur causing burns or irritation to eyes or skin. When inserting batteries into this product, the proper polarity or direction must be observed. Reverse insertion of batteries can cause charging, and that may result in leakage or explosion. Remove the batteries from this product if the product will not be used for a long period of time (several months or more) since during this time the battery could leak in the product. Do not store this product, or the batteries identified for use with this product, in high temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage. 36 5 NTP-6323 PARTS CHECKLIST MESSAGE WAITING 1. Handset 2. Base If you subscribe to voice mail from the telephone company and if there are voice messages that have been left in your voice mailbox, the display will show "MSG WAITING."
MSG AM NEW TOTAL Note: This function requires voice mail subscription from the local telephone company. Furthermore, the local phone company must provide a type of voice mail signaling called "FSK " (Frequency Shift Key). Not all telephone companies have the visual message waiting feature available. Please contact your local telephone company to check if this is available in your area. Tip: If you wish to delete the "Message Waiting" message, delete them as described in the handset settings section "Deleting the Message Waiting Indication" (see page 24). Using the One-Touch Voice Mail Dialing When the setting is programmed in the options menu (see "Programming One-
Touch Voice Mail Dialing" on page 23) you can dial out a programmed number at the touch of a button. This feature is specifically designed to easily check voice mail when you have that service through your telephone company. 1. Press Talk to access the telephone line. 2. Press . 3. The phone will begin dialing the number. Func 3. A C po w e r adapter 4.7-foot line cord for desk use 6. Shor t line cord f o r 5.Short line cord for wall installation w all installation 6.Ni-MH battery pack 6 35 CALLER ID LOCATION OF CONTROLS AND FEATURES Returning Caller ID Calls You can return calls by using the Caller ID callback feature. 1. Use the to scroll to the call record you wish to call back. PM
NEW TOTAL 10.Up and Down button 2. If the number displayed is not correct (needing 7, 10, or 11 digits), use the key to toggle the number to display the correct number of digits to be dialed. Func 1.Talk button PM
NEW TOTAL Press Func PM
NEW TOTAL Press Func 3. Press Talk to dial out the displayed number. PM
NEW TOTAL 4. Press to cancel dialing. Dir 5. To end the call, press Talk, or place the handset back in the base. 3.Scan/Del button 4.Func 5.Keypad 8.Temporary Tone Key 7.Dir button 6.Flash button 2.Redial/Pause button 11. button 9.volume control switch 34 7 LOCATION OF CONTROLS AND FEATURES CALLER ID 1. 2. 3. 4. 5. 6. 7. 8. Talk The Talk key is used to access the telephone line or end a call. RE/PA Redial Key When the phone is idle or off-hook, press to redial the last number dialed. Is also used to insert a measured pause into a number stored in the phone book. RE/PA RE/PA Del / Scan Del / Scan Scan/Del key The key, When viewing or editing menus and logs, the key is used to erase digits on the display, and single or multiple entries from the phone book and Caller ID directories. The key, when pressed while the phone is off-hook, will scan up to 40 channels and select the clearest one to provide the best possible reception. Del / Scan Del / Scan Func Func key The key is used to access the handset settings. The key can be programmed to do two-touch dialing of a single number, such as your voice mail service number. Press and hold at Standby Mode, enter the main menu. The key can also be used to change the 7/10/11 digit dialing mode during caller ID callback. Func Func Func Dial Pad Numeric keys are used in the conventional manner for dialing. Flash Key The key is used to access telephone company services, such as call waiting. Flash Flash Directory Key Use to program and retrieve the numbers in the speed dial Phone Book. Dir Dir Temporary Tone Key If the base is set to pulse dialing, pressing causes subsequent digits to be dialed out using tone until the line is put back on hook.
9. When you receive a Caller ID message, voice mail message, or when the phone is ringing, the New Call light will flash accordingly. 10. Volume Control Switch The Volume Control switch is used to adjust the handset volume level between Hi, Mid and Low. 11. button The button lets you scroll through menus and logs. button 12. If the name or number is more than 11 characters, press the or button to view the rest of the display. Deleting Caller ID Records When viewing the Caller ID, information you can delete a single call record or all the call records. To Delete a Single Record 1. Use to scroll to the call record you wish to delete. 2. Press . Del / Scan PM
NEW TOTAL PM
NEW TOTAL 3. To delete the record press . The display will show next records. Del / Scan 4. Press to exit the Caller ID log. Dir To Delete All Records 1. Press or . 2. Press and hold . Del / Scan PM
NEW TOTAL PM
NEW TOTAL 3. To delete all the Caller ID records press . The display will show "ALL ERASED" and then return to the idle display. Del / Scan 8 33 CALLER ID LOCATION OF CONTROLS AND FEATURES Caller ID with Call Waiting Service In order to use the "Call Waiting Caller ID" service you must subscribe to a telephone company that offers Caller ID service combined with "call waiting"
service. When a new call comes in while you are talking, you will hear a notification beep from the handset and the volume is momentarily muted. The new caller's name and phone number, if available, appears on the display. PM
NEW TOTAL Base Use to page a handset(s). Charge Contacts Flash 1. When you receive a "call waiting" call and you want to connect the call, press
. The active call will be placed on hold and the new call will be active. 2. Press to alternate between calls. 3. Press to end the call or place the handset back on the base. Flash Flash Storing Caller ID Records 1. Use to scroll to the call record you wish to store into the phone book. PM
NEW TOTAL 2. Press and hold . RE/PA 3. If you wish to edit the newly stored number, edit it in the phone book (page 29, Editing a Stored Number ). Dir 4. Press to return to the idle display. Note: When numbers are stored into the phone book, a 1 is inserted in front of the number. If you must dial a 10-digit number for local calls, you must edit the number to exclude that digit to dial out correctly. Charge LED In Use LED
- Used to initiate a handset page . Page In Use / Charge LED -
Lights when the handset is on the cradle being charged. Lights when the handset is in use. Flashes when the phone is ringing. Charging Contacts - Used to recharge battery and reset the security code in the handset. 32 9 LOCATION OF CONTROLS AND FEATURES CALLER ID Base Bottom View Caller ID Displays Display shows name and number, time and date of the call. Tel Jack Tone/Pulse Switch Tel jack Used for connecting a telephone or fax machine. Tone/Pulse Switch Used to set the dialing method for tone or pulse dialing. PM
NEW TOTAL PM
NEW TOTAL AM
TOTAL Display shows number-only service.
"PRIVATE" will be shown when a call is received from a blocked number. For privacy reasons, some states allow callers the option to prevent their telephone data from being displayed on the other party's Caller ID display. Display shows when the Caller ID information was received incorrectly or only part of the data was received. AM NEW TOTAL Note: When an error is received, none of the data from this call is saved in memory. MSG Display shows when a voice mail message has been received and is stored by message waiting service provided by the phone company. AM NEW TOTAL L1 L2 AM NEW TOTAL L1 L2 This is displayed when or is pressed and there is no Caller ID data stored. 10 31 CALLER ID CHOOSING A LOCATION Caller ID allows the caller's name and phone number to be shown on the display before you answer the call. In order to use this feature you must first subscribe to Caller ID service with your telephone company. When You Receive a Call 1. When the telephone rings, the caller's name and phone number appears on the display. 2. The new Caller ID record includes the name and number of the caller and the time and date the record is received. The New Call light will flash to indicate that you have a new Caller ID call stored in memory. Note: When the Caller ID information is received, it is stored in memory so that this information can be recalled for later use. Up to 80 Caller ID calls can be stored.
NEW TOTAL PM Viewing the Caller ID List This phone automatically stores the last 80 calls received. If a call is received from the same number more than once since the records were last viewed, no new entry is made, but the repeat call icon ( "RPT" ) is displayed. 1. With the handset idle press or . 2. Any unviewed (new) calls will be displayed first. The most recent call will be displayed. The information on the call will be displayed with the name, number, date, and time that the call was received. PM
NEW TOTAL 3. To scroll to the next call, press or . The will go through the calls from the last call received to the first. The will allow you to view the calls from the first call received to the last. 4. If the name or number is more than 11 characters, press the or button to view the rest of the display
(as indicated by the arrows in the top line of the display). Do the following:
Choose the best location Connect the phone Choose the dialing mode Away from heat sources, such as radiators, air ducts, and sunlight Near a central location and on a level surface Away from a microwave oven Away from VCRs and TV sets and other electronic equipment Away from noise sources such as a window by a street with heavy traffic Away from a personal computer Away from excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock Where you place the phone affects the reception quality of the handset:
Away from another cordless telephone Place the base near an AC electrical outlet and near telephone line jack. Place the base away from metal walls and metal file cabinets CAUTION: The cordless telephone operates at a frequency that may cause Interference to nearby TVs and VCRs; the base phone should not be placed near, or on top of a TV or VCR. If interference is experienced, Moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. While the 2.4GHz frequency is inherently clearer, we suggest that you do not use this phone within 20 feet of a working microwave. The microwave produces frequencies in this range which may cause interference. This interference is normal for all 2.4GHz phones and should not be considered a product defect. 5. Press to return to the idle display. Dir Note:
30 11 TELEPHONE SETUP Connecting the Base SPEED DIALING Preferred Calls You can assign stored numbers as preferred calls. When an incoming call is matched to a stored number designated as preferred, the phone will generate a special ring sound after caller ID information is received. To mark a phone book entry as preferred, add a "#" mark at the beginning of the name during programming or editing. AM
TOTAL Blocked Calls If you do not want to have the phone ring when a specific number calls, you can store that number in the phone book and assigned it as blocked. When an incoming call is matched to a stored number designated as blocked, the phone will not ring after caller ID information is received. To mark a phone book entry as blocked add a " " mark at the beginning of the name during programming or editing.
AM
TOTAL 1. Connect the telephone line cord to the "Tel jack And to a telephone outlet. 2. Connect the AC Power adapter to the 9V DC jack and to an AC outlet. Note: Use only the supplied AC power adapter. Do not use any other AC power adapter. Connect the AC power adapter to a continuous power supply. Place the phone close to the AC outlet so that you can plug in the AC power adapter easily. Tip:
If your telephone outlet is not modular, contact your telephone company for assistance. 12 29 SPEED DIALING TELEPHONE SETUP Deleting a Stored Number 1. Press . Dir T/P Switch 2. Locate the number you wish to delete using . PM
NEW TOTAL 3. Press . The display will show Del / Scan PM
NEW TOTAL 4. Press to delete the phone book memory. Del / Scan PM
TOTAL 5. When you are finished press . Dir 1. Choose the correct dialing mode. 2. Select the dialing mode Tone or Pulse by setting the switch on the bottom of the base unit. Note: Changes to the switch position during a call do not take effect until the call has ended. T/P Switch Tip:
If you are unsure of the proper dialing mode,Make a trial call with the dial mode setting to TONE If the call connects,leave the switch as is (TONE mode),otherwise, set to PULSE.. NOTE: Pulse dialing works for direct dialing and redialing only, not for memory dialing. Deleting All Stored number Dir 1. Press the button (If the phone book is not full, the LCD screen will display "PHONE BOOK"). Press the to locate the phone book list. 2. Press and hold down the , The display will show. Del / Scan Handset Volume Adjust the receiver volume of the handset using the volume control switch on the right side of the handset. AM
TOTAL 3. Press again, the LCD Screen will display
"ALL ERASED" and then return to the idle display. Del / Scan Volume Control Switch 28 13 BATTERY INSTALLATION SPEED DIALING To install the cordless Ni-MH handset battery pack:
1. Slide the battery pack up into the compartment at the bottom of the handset. Make sure that the end of the battery with the contacts is inserted first. 2. Snap the battery compartment cover into place. 3. Place the handset on the charging cradle. 4. Once you have installed the battery pack and placed the handset on the cradle, you will hear a tone Indicating the handset has connected with the charging contacts and will successfully charge. 5. IMPORTANT : Charge the battery pack for at least 12 hours before using the handset the first time. 6. The IN USE/CHARGE LED on the charging cradle will light when the handset is properly making contact with the charge terminals. Battery Duration A fully charged battery lasts for approximately:
4 hours when you use the handset continuously (talk time). 5 days when the handset is not in use (standby). When the Battery Needs Charging The phone will beep. The display will show the Low Battery icon. BATT AM NEW TOTAL When to Purchase a New Battery Pack If the battery lasts only a few minutes even after a full charge, the usable life of the battery has expired and needs to be replaced. Making Calls From the Phone Book 1. To make a call from the phone book, press . Dir 2. Use to locate the exact number you wish to dial. 3. Press Talk . The display will show the directory name, and begin dialing the number.
4. When you are finished with your call, press Talk, or place the handset back on the base. Editing a Stored Number 1. Press . Dir 2. Locate the number you wish to edit using or keys . 3. Press . The entry will display with a flashing prompt over the first character. Flash
4. Move the cursor to the section you wish to edit using the , , , and keys. Characters or numbers will be inserted in front of the cursor. 5. To erase a character or digit, press the key. Del / Scan 6. When the entry is edited as you desire, press and hold to store the edited entry. RE/PA 14 27 SPEED DIALING BASIC DISPLAYS Letter Table 9th Press 1 1st 2nd 3rd 4th 5th 6th 7th 8th Key Press Press Press Press Press Press Press Press
Space 1 Space & '
2 A B C c b a 3 D E e f d F g 4 G H i h I 5 J K L j k l 6 M N o n m O 7 P Q q p S R 8 T U v u t V 9 W X Y Z w x 0 0 0 0 0 0 0
. 2 3 4 5 6 r 8 y 0 1 B A D E G H J K N M 7 S T U z 9 0 0 Handset ldle (after time is set ) New CID Received Line Ringing Message Waiting Viewing the Phone Book 1. Press to enter the phone book. Dir Off- hook Call Timer 2. Use to locate the exact number you wish to view. PM
NEW TOTAL AM
TOTAL 3. If the name or number is more than 11 characters, press the or button to view the rest of the display
(as indicated by the arrows in the top line of the display). AM
TOTAL 4. Press to exit the phone book, or let the phone book time out. Dir 26 15 BASIC OPERATION SPEED DIALING Making Calls 1. Pick up the handset and press Talk . PM The NTP-6323 will store up to 64 speed dial numbers in alphabetical order. No duplicate numbers can be stored. Storing Phone Numbers 1. With the handset in the idle state, press . Dir 2. Wait until you hear a dial tone and then dial the number you wish to dial. The call timer will begin. Tip: It is also possible to pre-dial the number, by dialing the number prior to pressing the Talk key. The number displayed will be dialed once Talk is pressed. 3. When you are finished talking, press the Talk key or place the unit back into the base to end the call. Receiving Calls When you hear the phone ring:
1. The display will show "RING". If you have Caller ID, the display will show the Caller ID information after the first ring. 2. Press to create a new phone book entry. Flash PM
NEW TOTAL AM NEW TOTAL 3. Enter the name you wish to store using the dial pad to enter the letters (up to 16 letters). See the following letter table for how to program the letters using the number pad. To move the cursor to the right, such as to enter a new letter, press . Example: For JOHN SMITH dial this sequence:
5 J 666 0 44 H 66 N 1 space S 7777 6 M 444 I 8 T 44 H 4. Press , and dial the number you wish to store (up to 16 digits). Press to insert a dialing pause into the number. RE/PA 2. With the handset off the base, press Talk . The call timer will start. 3. When you are finished, press Talk or place the handset back on the base. 5. Press and hold when finished to store the number into memory. RE/PA AM NEW TOTAL Note: If you mis-type entering the phone number, you can move through the number and edit it by pressing or . To delete a character or number inside the cursor, press the key. Del / Scan 16 25 SETTINGS BASIC OPERATION Deleting Message Waiting Indication Redialing 1. Press Talk. 1. Press and hold the key to enter the menu. Func 2. Press to go to the message waiting programming option. 0 PM
TOTAL Flash 3. Press to reset the message waiting indication. 4. Press and hold to delete the indication. A long beep will sound to confirm. RE/PA 5. Continue with programming or press to return to the idle screen. Dir PM 2. Wait until you hear the dial tone and then press to redial the number last dialed . RE/PA Additional Options To: Do This:
Adjust the volume in the earpiece Switch to temporary tone dialing Receive a call waiting call Adjust the volume control switch on the right side of the handset to the desired volume level. Press the key after the phone is in use. The phone will remain in tone dialing mode for the duration of the call. Press to go to the new caller. Press again to go back to the original caller.
Flash Flash NOTE:To receive Caller ID information on incoming telephone calls, you must subscribe to the Caller ID service provided by your local telephone company. 24 17 SETTINGS SETTINGS Handset Settings You can change the setting on the handset in the options menu. Access the options menu by pressing and holding the key. Func There are 10 settings in the options menu which can be changed. You can scroll through the option menu in the listed order by pressing the key. Settings can be reached directly by pressing that number on the keypad. Dir key key Flash/Edit key Flash To edit a setting, press the key, use the key to toggle between the setting options, and then press and hold to save changes. You can continue programming options by using the dial pad keys or the key to go to a new setting. Press to exit the options menu. RE/PA Dir Key Function 1 abc 2 def 3 ghi 4 jkl 5 mno 6 pqrs 7 Language: Change the language that appears on the display. Choose between English, French, and Spanish. First Ring On/Off: Turn the first ring of the phone off so that it does not ring until caller ID information has been displayed. Particularly useful when using the priority and blocked call features or the private and unavailable ring settings. Time Set: Change the time and date. Ring Hi/Low/Off: Change the volume of the ringer on the handset or turn the ringer off. Contrast: Adjust the brightness of the display for optimum viewing. Area code: At any time during options programming of a home area code where 7-digit dialing is used for ease of callback and other features
(do not program if you use 10-digit dialing to call numbers in your area). Flash Time: Allows you to adjust the flash time to accommodate the phone service in your area. Changing the Pause Time 1. Press and hold the key to enter the menu. Func 2. Press to go to the pause time programming option. tuv 8 3. Press to change the setting. "3" will begin flashing. Flash
4. Use the key to select the desired dialing delay. 5. When the setting you desire is displayed, press and hold to save the setting. A long beep will sound to confirm the setting has been saved. RE/PA 6. Continue with programming or press to return to the idle screen. Dir Programming One-Touch Voice Mail Dialing 1. Press and hold the key to enter the menu. Func 2. Press to go to the auto answer programming option. wxyz 9
3. Press to enter your voice mail speed dial number. Flash 4. Use the dial pad to enter the phone number used to access your voice mail messages (up to 16 digits). Press to insert a dialing pause. RE/PA 5. When the phone number you desire is displayed, press to confirm the number has been saved. to save the setting. A long beep will sound and hold RE/PA 18 23 6. Continue with programming or press to return to the idle screen. Dir SETTINGS SETTINGS Setting the Area code 1. Press and hold the key to enter the menu. Func 2. Press to go to the AREA CODE programming option. mno 6 3. Press to change the setting. "--- will begin flashing. Flash
4. Use the dial pad to enter the three digit area code there your phone numbers begins with. 5. When the setting you desire is displayed, press and hold to save the setting. A long beep will sound to confirm the setting has been saved. RE/PA 6. Continue with programming or press to return to the idle screen. Dir Tip: Do not use the AREA CODE programming if you are required to dial 10 digits (xxx xxx xxxx)to dial a local number. _ _ Changing the Flash Time 1. Press and hold the key to enter the menu. Func 2. Press to go to the flash time programming option. pqrs 7 3. Press to change the setting. "600" will begin flashing. Flash
4. Use the key to select the desired dialing delay. 5. When the setting you desire is displayed, press and hold to save the setting. A long beep will sound to confirm the setting has been saved. RE/PA 6. Continue with programming or press to return to the idle screen. Dir Note: The standard and default flash time setting is 600ms. This is the setting you should use to access standard telephone services such as call waiting. This setting is adjustable to allow for PBX and other special uses. Key Function tuv 8 wxyz 9 0 Pause Time: Allows you to adjust the number of seconds that a pause lasts such as during programmed pauses in your speed dial numbers or after your PBX number is dialed. Voice Mail: The programmed one-touch number designed to enable easy access to voice mail service provided by your telephone company. MSG Waiting Delete: Clears any current message waiting indication. Note: At any time during options programming you can quit and the settings that you have changed will be saved. Press to quit the options menu or let the options programming time out by not pressing any keys for 20 seconds. Dir Changing the Language 1. Press and hold the key to enter the menu. Func 2. Press to go to the language programming option. 1 PM
TOTAL 3. Press /Edit to change the setting. "ENGLISH" will begin flashing. Flash 4. Use the key to toggle between ENGLISH, ESPANOL, and FRANCAIS. 5. When the setting you desire is displayed, press and hold /Save to save the setting. A long beep will sound to confirm the setting has been saved. RE/PA 6. Continue with programming or press to return to the idle screen. Dir 22 19 SETTINGS SETTINGS muting the First Ring On or Off Setting the Ringer Level 1. Press and hold the key to enter the menu. Func 2. Press to go to the silent programming option. abc 2 PM
TOTAL 3. Press to change the setting. "On" will begin flashing. Flash 4. Use the key to toggle between On and Off. 5. When the setting you desire is displayed, press and hold to save the setting. A long beep will sound to confirm the setting has been saved. RE/PA 6. Continue with programming or press to return to the idle screen. Dir Setting the Time and Date 1. Press and hold the key to enter the menu. Func 2. Press to go to the time set programming option. def 3 AM
TOTAL 3. Press to change the setting. The hour will begin flashing. Flash 4. Press the key to enter the month, date, hour and minute. To move cursor, press the key or the key. 5. When the setting you desire is displayed, press and hold to save the setting. A long beep will sound and you are returned to the options menu. RE/PA 6. Continue with programming or press to return to the idle screen. Dir 1. Press and hold the key to enter the menu. Func 2. Press to change the setting. "HI" will begin 4 flashing. PM
TOTAL 3. Use the key to toggle between HI, LOW, and OFF. 4. When the setting you desire is displayed, press and hold to save the setting. A long beep will sound to confirm the setting has been saved. RE/PA 5. Continue with programming or press to return to the idle screen. Dir Adjusting the Contrast 1. Press and hold the key to enter the menu. Func 2. Press to go to the contrast programming option. jkl 5 PM
TOTAL 3. Press to change the setting. "6" will begin flashing. Flash 4. Use the key to toggle between the eight levels of contrast. 5. When the setting you desire is displayed, press and hold to save the setting. A long beep will sound to confirm the setting has been saved. RE/PA 6. Continue with programming or press to return to the idle screen. Dir 20 21
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-04-26 | 2472 ~ 2475.9 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-04-26
|
||||
1 | Applicant's complete, legal business name |
MGA Entertainment (HK) Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0018148171
|
||||
1 | Physical Address |
Suite 301, 3/F, Chinachem Golden Plaza
|
||||
1 |
Kowloon, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
j******@baclcorp.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
LU9
|
||||
1 | Equipment Product Code |
305132
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J******** C******
|
||||
1 | Title |
QA Director
|
||||
1 | Telephone Number |
852-2******** Extension:
|
||||
1 | Fax Number |
852-2********
|
||||
1 |
j******@mgae.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Telephone | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bay Area Compliance Laboratory
|
||||
1 | Name |
J**** C****
|
||||
1 | Telephone Number |
408-7********
|
||||
1 | Fax Number |
408-7********
|
||||
1 |
b******@baclcorp.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 68 | 2403.05 | 2406.95 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 2472 | 2475.9 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC