70 Please read this User Manual carefully before using the product, and keep it properly. Accessories Product descriptions Top vent hole Reminder:
Please do not block the vent hole while installing and/or using the product. Screen Bracket Wall mounting structure Double-sided adhesive tape Front The product could be installed with various ways:
Installation 87 Back vent hole Reminder:
Please do not block the vent hole while installing and/or using the product. Wall mounting hole Button Battery cover Battery insulating board Back Note:
Open the battery cover and remove the battery insulation sheet when using the product for the rst time. Using the product together with bracket: Align the bracket with the wall mounting hole on the back of the product and press the bracket into the mounting hole. Push it upward. After the bracket is securely connected, put the product onto a table, bookshelf or other appropriate at surface. Mounting the product onto walls: Paste the double-sided adhesive tape onto the surface of wall mounting structure, remove the release paper and attach the other side to the wall surface. Notices 1. 2. 3. 4. 5. Do not immerse the vent holes of the product in water. Do not forcibly remove the product after it has been attached to wall to avoid damaging product or wall surface. This product is not to be used in environments below 0. Please keep away from environments with high temperatures, high humidity, and other severe conditions. The battery that comes packaged with this product is for trial use only and is not guaranteed to have the same lifespan as a standard new battery. This product is meant to be used as an everyday instrument, not as a measuring tool. Reminder :All illustrations in the operation manual to present the product, accessories, user interfaces, etc. are schematic for reference only. Since our products are constantly updated and upgraded, actual products may slightly dier from the schematic illustrations. Actual products shall govern accordingly. Cleaning Please avoid any water from seeping into the product while cleaning it. Use a piece of soft cloth soaked with neutral detergent to wipe away dirt on the product surface. Technical parameters Product name: Bluetooth Hygrothermograph(LCD version) Model: MHO-C702 FCC ID: 2AWMOMHOC702 Battery: CR2032 button cell (two installed) Rated voltage: DC3.0V Material: ABS Product dimensions: 887012mm Product weight: 59g (including batteries) Temperature measuring range: 0C-60C Temperature display resolution: 0.1C Humidity measuring range: 0%-99%RH Humidity display resolution: 1%RH 420 LCD Indicators Buttons and functions Temperature Connection indicator Low battery indicator Humidity Time Comfort level indicator descriptions Max. Min. C/F Max. Min. Comfort level indicator
+/Max. Set
-/Min. View Max./Min. Press + or - button while in normal display mode. The LCD will then show the corresponding maximum or minimum temperature and humidity over the past 24 hours. Reminder: If no operation is performed within ve seconds, the product will automatically quit View mode and enter normal display mode. Temperature
<19C 19CTemperature27C Temperature
>27C Set time and temperature units Temperature Humidity Humidity<20%
20%Humidity85%
Humidity>85%
Press and hold the Set button , the number indicating the hour will start ashing and the product will enter setting mode. While in setting mode, corresponding numbers will ash. Press + or - button to change the settings. After setting are completed, press the Set button to turn to the next setting. Reminder: If no operation is performed within 10 seconds after the numbers start ashing, the product will automatically quit setting mode and enter normal display mode.
Low battery reminder When this icon appears on the screen, it indicates that the battery is low and must be replaced. Low battery indicator Connect to Meawow Connect to Meawow App This product is connected to Meawow App and can be interconnected with other products on the App. Search for Meawow in the App Store or scan the QR code to download and install the Meawow App. Add devices Open Meawow App, click the Add Sub-device button on the
+ page at the upper right corner or Smart Gateway page . Select Temperature and Humidity Sensor on the page of Select Device Type. Short press the setting button 3 times on the back of the hygrothermograph, and conrm the left icon on the screen of temperature and humidity meter is ashing, which means the device starts the network distribution mode. After the device is successfully added, it can be found in the My Home list. Smart Linkage After the device is successfully added, click the Smart Linkage module on the main interface of the App device to set the smart and linkage functions, such as:
Set the temperature and humidity comfort zone. When the ambient conditions are out of the comfort zone, the phone will send notices and reminders. Set it as Turn on the air conditioner when the ambient temperature is higher than 32C.
* Some smart linkage functions need to be used with other devices. For more information, please consult the ocial customer service. Tips: Due to the upgrade and update of App, the actual operation may be slightly dierent from the above description. Please follow the guidance in the current App. Maintenance Battery replacement Open the battery cover along the direction marked in the gure. While keeping the positive electrodes of the two CR2032 button batteries facing upward, install them into the battery compartment by aligning them with the buckle and then close the battery cover. PN00W201120 105g _Meawow v0.4 2021/10/14 2021/9/2 v0.1 2021/9/17 V0.2 FCC id,. 2021/9/27 v0.3 fcc 2021/10/14 v0.4 app qrcode;
Operation Manual of Bluetooth Hygrothermograph LCD version FCC Caution. 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
* RF warning for Portable device:
ThedevicehasbeenevaluatedtomeetgeneralRFexposure requirement.Thedevicecanbeusedinportable exposure conditionwithoutrestriction. Operation manual version: V1.0 Manufacturer: MeasmartTechnologyINC Address: 17800CASTLETONSTSTE665CITYOFINDUSTRY, California,91748UnitedStates For any after-sales service, please email Meawow via service@meawow.com or visit our ocial website:
www.meawow.com. For more information, please follow the facebook page of Meawow. We, MeasmartTechnologyINC hereby declare that this equipment is in full compliance with the applicable US and European's DirectivesEuropean Norms, and its amendments.