MEMS EVOLUTION2 SENSOR PRODUCT NOTICE Product name MEMS EVOLUTION2 SENSOR CAI 875103 PRODUCT DESCRIPTION The MEMS EVOLUTION2 SENSOR is a battery powered air pressure and air temperature sensor designed to operate inside tubeless earthmover tires. The sensor is secured to the inside of the tire using a special mounting patch. The sensor measures the pressure and temperature inside the tire and sends this information, via a radio transmitter, at approximately 1 minute intervals to a MEMS EVOLUTION2 TRANSCEIVER unit which is usually located in the drivers cabin. PRODUCT CERTIFICATION Model: RV1.15 FCC ID: FI5-RV1-15E IC: 5056A-RV115 This device complies with part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Michelin may void the user's authority to operate the equipment. French translation required for IC in final manual. PRODUCT SEPECIFICATION Performance Characteristics Normal transmission period: 60 seconds + 10 seconds Fast transmission period: 16 seconds Tire compatibility: 49'' to 63'' earthmover tubeless tires TX frequency: 433.92MHz ISM band Physical Characteristics Dimensions: L = 9.9cm, W = 5.3cm, D = 5cm Weight: 102g Operating / Storage Conditions Operating temperature range: -40C to +125C Operating Pressure range: 100 kPa to 1400 kPa Storage temperature: 0 to +50C Electrical Performance Service life in storage: 2 years (0 to +50C) Service life in use: nominally 2 years Environment Non RoHS compliant INSTALLATION Patch Installation For a Standard Tire it is necessary to glue a patch to the inside of the tire, onto which the sensor will be affixed. Patch Detailed installation instructions for gluing the patch are provided with the patches themselves. A Sensor Ready Tire (SRT) has a belt patch incorporated into it as part of the manufacturing process and therefore does not require the above procedure. Belt patch Sensor Installation Record the sensor number (shown on each of four white labels affixed to the sensor) along with the brand number of the tire into which you are about to install the sensor
. For a Standard Tire slide the SENSOR onto the dovetail of the patch. Insert the supplied metal split-pin to lock the SENSOR in place. IMPORTANT It is highly recommended to maintain in a notebook a list of the sensor numbers and the brand numbers of the tires into which each sensor has been installed. This information is critical to the operation of MEMS. For a Sensor Ready Tire (SRT) insert the Velcro Strap supplied with the sensor. Place the sensor in between the ends of the strap and wrap the ends around the sensor, so that the hooks and loops of the Velcro Strap stick together. IMPORTANT It is highly recommended to maintain in a notebook a list of the sensor numbers and the brand numbers of the tires into which each sensor has been installed. This information is critical to the operation of MEMS. Disposal When the sensor reaches the end of its service life, please dispose of it in accordance with the appropriate regulations in force for your country. Contact Details For more information or assistance, please contact your Michelin MEMS representative. Features, specifications are subject to change without notification. Document version 0.1 MFP MICHELIN 2011 All rights reserved. Exclusive property of Manufacture Franaisedes Pneumatiques Michelin. Any reproduction or utilization prohibited without the consent of Michelin.