USB NES/SNES classic mini wireless controller hank you for purchasing the MICREAL product. Please read T this [User Manual] carefully before using the product, and retain in for future use. If you have any quesons or suggesons about our products, please contact: support@szmicreal.com. Detatils Description D-Pad 8-way USB Charging Port Two Fire Buons NES Wireless Receiver:
For NES Classic mini USB Wireless Receiver:
For Windows XP/7/8/10, Mac OS, Linux, Raspberry Pi. Low Battery and Charging Reminder When the controller baery capacity is less than 30%, The RED light will blink. It prompt you to charge the controller baery. SELECT START B A Red LED blink Red LED blink when low baery Blue LED light for Charging. You can use the USB cable included in the package to connect to any standard USB power supply to charge the controller, When the controller is charging, the Blue LED will light up, Aer full charged the Blue LED will be o automac. Turbo Function Setting The buons A and B of the wireless controller can be set with Turbo funcon. In the game, if the buons has turbo funcon, you cab keep pressing A or B without releasing the game acon and the turbo funcon will be executed automacally. Turbo seng and cancel methods are as follows:
Press and hold Select+A(B) at the same me for 1 second, A(B) will have connue re funcon. Cancel the Turbo funcon, you just need to press and hold Select+A (B) for 1 second again, the connue re funcon of buon A(B) will be cancelled. Turbo LED SELECT START B A Return to the NES Games Menu By Controller SELECT START Start/Wakeup Buon Select Buon B A R E S E T P O W E R B A RESET SELECT START Link Indicate: Red LED Recharge Indicate: Blue LED NES Classic Mini Adapter USB Receiver Press the START+SELECT at the same me on wireless controller, equivalent to Press RESET buon of the NES Classic Mini game. Fast Installation and Startup Paring Controller With USB Adapter SELECT START Red LED ash B A Press and hold the START+SELECT+UP for 1s SELECT START B A Step1: Press and hold the START+SELECT+UP for 1s unl Red LED ashes quickly. Controller will enter into pairing mode. Aer Red LED does not ash quickly but stays on, which means the pairing between the receiver and controller is successful. Step2: Insert the receiver into the NES game console or PC USB port. 3. If without any operaons in 30s, Controller will enter into the standby mode. Red LED will turn o, You can acvate the Controller via pressing any buon. 4. Controller will enter into sleep mode if there is no operaons aer 10 mins. You can only press the Start buon to wake up the controller. 1. Plug the USB receiver with NES adapter to NES Classic Mini Console, then press the START buon of Controller. 2. Plug the USB receiver to PC or other game console, then press the START buon of Controller. Change the Input Mode Of USB Adapter Package Contents SELECT START B A 1. Plug the USB receiver to PC USB Socket. 2. Press and hold the START+SELECT+A for 1s the USB Receiver will enter Direct Input mode;
3. Press and hold the START+SELECT+B for 1s the USB Receiver will enter XBOX Input mode;
Note: Aer the controllers are connected to the PC or Raspberry Pi gaming plaorm via the USB receiver, if there is a incompability , try to change the working mode of the controllers to Dinput or Xinput (Factory default). Controller Working States 1. Pairing Mode:
Press and hold START+SELECT+UP for 1s unl Red LED ashes quickly, which means the controller enter into pairing mode. and waing for a new USB receiver to pairing. 2. Link Mode:
If Controller and Receiver connect successfully, Red LED will light up. At this moment, you can play games. 3. Standby Mode:
Without no operaons in 30s, Controller will enter into standby mode, and LED will turn o. Press any buon can wake it up. 4. Sleep Mode:
without no operaons aer 10 mins, Controller will enter into sleep mode only START buon can wake it up. 5. Power o:
When the baery in your controller are out, the controller will power o automacally. Model :
Compability:
Charge method:
MRN027WL NES Classic mini, Windows XP/7/8/10, Mac OS, Linux, Raspberry Pi Charge by 5V 500mA Charger, Charge by computer USB 2.0port . Charge me: About 2 hours. Baery: 250mAH Working me 100H Wireless transmission 2.4GHz wireless connecon Wireless eecve: distance > 30 Attention 1. Charging input power rang: DC5V.500mA. 2. The built-in baery is a rechargeable polymer lithium-ion baery. 3. Do not use the product in direct sunlight or in damp condions. 4. Do not disassemble the controller for any reason, so as not to make the baery short-circuit or even burned. 5. The capacity of baery is 250mA, which takes 2 hours for full charge. 6. It can be used connuously for about 100 hours. 7. Place the Controller in a recyclable container when it's no use. FCC.., .. 11, authority to operate the equipment Changes or moo ionsnot expressapproved theparty resporsltle for c001p1ecould vod the u This equ1pmert has been tested and found to comyhthe limits for a aass B d1gtaJ dee,pursuantto Part 15 olthe FCCles.These Imaredesigned towidereasonaect ,onagairst fulerfereoc ei1 a resbal1r6la,on.Ths equipment generates uses and can radiate radlO lrequercy energy and, 11 not installed and used inordancehthe instructions, mcaeharmful interenceto radio can mun,ons Hoer,there IS no guarartee t,rterfereev.,11 net occ ur ,n a particular 1r,;talal101t tt ths equpmert cause harrrtul mtference to radio or telis1oneption,hcan be detemined turningthe equipm ert off and on, theeris encouraged to try to correct the interference by one or more of the follov.ing measu enta reloca te the recingantenna
-Increase the separation benthe equipment and rece
-connect the equipment into an outlet on a c,rcurt dill<entfrom that to,chthe recris connected.
-Consult the dealer or an expenenced radiofTV technician for help Thiscecomples part15 d the FCC rules. Operation s SUbjecl to the Idng condt,ons(1C devemnctcat.se harmful interfererce, and (2) themlEt epta1rterferercereced,ircludilg interference that may cause undesoperation.