|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2024-12-17
|
|
1 2 3
|
Applicant's complete, legal business name |
Micro-Star Int'l Co.,Ltd.
|
|
1 2 3
|
FCC Registration Number (FRN) |
0007127640
|
|
1 2 3
|
Physical Address |
No.69, Lide St., Zhonghe Dist.
|
|
1 2 3
|
New Taipei City 235, N/A 235
|
|
1 2 3
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
h******@acbcert.com
|
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
I4L
|
|
1 2 3
|
Equipment Product Code |
MWH540S
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
F**** H********
|
|
1 2 3
|
Title |
section manager
|
|
1 2 3
|
Telephone Number |
+886-******** Extension:
|
|
1 2 3
|
Fax Number |
+886-********
|
|
1 2 3
|
E-mail |
f******@msi.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3
|
Firm Name |
Shenzhen UnionTrust Quality and Technology Co.,Ltd
|
|
1 2 3
|
Name |
B**** L********
|
|
1 2 3
|
Physical Address |
16/F, Block A, Building 6th, Baoneng Science
|
|
1 2 3
|
16/F, Block A, Building 6th, Baoneng Science and
|
|
1 2 3
|
Shenzhen, 518109
|
|
1 2 3
|
Shenzhen, 200233
|
|
1 2 3
|
China
|
|
1 2 3
|
Telephone Number |
86-75********
|
|
1 2 3
|
02161********
|
|
1 2 3
|
Fax Number |
86-75********
|
|
1 2 3
|
E-mail |
b******@uttlab.com
|
|
|
app
s
|
Non Technical Contact
|
|
1 2 3
|
Firm Name |
Shenzhen UnionTrust Quality and Technology Co.,Ltd
|
|
1 2 3
|
Name |
B******** L********
|
|
1 2 3
|
Physical Address |
16/F, Block A, Building 6th, Baoneng Science
|
|
1 2 3
|
Shenzhen, 518109
|
|
1 2 3
|
China
|
|
1 2 3
|
Telephone Number |
86-75********
|
|
1 2 3
|
Fax Number |
86-75********
|
|
1 2 3
|
E-mail |
b******@uttlab.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | No |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 | DTS - Digital Transmission System |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIFI/BT module |
| 1 2 3 | WiFi/BT Module |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: 2AJVQ-MWH540S Grant Date: 04/30/2024 |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Output power is maximum peak conducted.
This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| 1 2 3 | Output power is maximum average conducted. This device supports IEEE 802.11 a/n/ac/ax 20, 40 and 80 MHz channel bandwidths. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This device supports 2T2R MIMO.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| 1 2 3 | Output power is maximum peak conducted.
This device supports WIFI 802.11 b/g/n/ax20 and 40 MHz channel bandwidth.
This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.
This device supports 2T2R MIMO.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
American Certification Body, Inc. t/a ACB, Inc.
|
|
1 2 3
|
Name |
S**** H********
|
|
1 2 3
|
Telephone Number |
703-8********
|
|
1 2 3
|
Fax Number |
703-8********
|
|
1 2 3
|
E-mail |
s******@acbcert.com
|
|