FCC ID: I4L-8ZA4 Wireless Keyboard

105 X 140 mm 315 X 280 mm

/Model Name : 8ZA4 1 2 1 2 3 4 K32 WIRELESS COMBO KEYBOARD & MOUSE

/Model Name : D32 3

/Model Name : 8ZA4 / 8ZB4 / D32 1. USB Type-C Charging Port 2. Power On/Off 3. Type-C Charging Cable 1. Side Button 1 2. Side Button 2 3. Scroll Wheel 4. DPI Switch

/Model Name : 8ZB4 1. () BSMI Statement 1. Replacement of a battery with an incorrect type that can defeat a safeguard (for example, 2. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a in the case of some lithium battery types);

battery, that can result in an explosion;

3. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;

4. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. 2. 3. 4. CEHereby, MSI declares that the radio equipment type 8ZA4 / 8ZB4 / D32 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.msi.com MSI-EUROPE Eindhoven 5706 5692 ER Son 2.4GHz Dongle I4L-D32 Mouse FCC I4L-8ZB4 G52-XXXXXXXX 3715A-8ZA4 3715A-D32 XXXXXXXXXXXXXX XXXXXXXXXXXXXX NCC IC 3715A-8ZB4 XXXXXXXXXXXXXX Preset Switchable DPI: 800 / 1200 / 1600 Max DPI: 1600 Keyboard FCC I4L-8ZA4 NCC IC FCC Compliance Statement ISED Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, two conditions: (1) this device may not cause harmful interference, and (2) this device must Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to accept any interference received, including interference that may cause undesired operation. the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the This equipment has been tested and found to comply with the limits for a Class B digital device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1)Lappareil ne doit pas produire de brouillage; (2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure Statement The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. Declaration of the Presence Condition of the Restricted Substances Marking 8ZA4 Equipment name Type designation (Type) Restricted substances and its chemical symbols Unit Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent chromium

(Cr+6

) Polybrominated biphenyls

(PBB) Polybrominated diphenyl ethers

(PBDE) 1.0.1 wt %0.01 wt %

Note 1Exceeding 0.1 wt % and exceeding 0.01 wt % indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The indicates that the restricted substance corresponds to the exemption. 8ZB4 Equipment name Type designation (Type) Restricted substances and its chemical symbols Unit Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent chromium

(Cr+6

) Polybrominated biphenyls

(PBB) Polybrominated diphenyl ethers

(PBDE) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 1.0.1 wt %0.01 wt %

Note 1Exceeding 0.1 wt % and exceeding 0.01 wt % indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The indicates that the restricted substance corresponds to the exemption. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Any changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the device. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure NCC compliance with FCC regulations. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement. Specifications Keyboard: Input/DC 5V/0.5A Mouse: Input/DC 5V/0.5A Transceiver: Input/DC 5V/30mA Frequency range :2.40385-2.47985GHz Keyboard output power <-3 dbm Mouse output power <-25 dbm Transceiver output power <-0.5 dbm

p Label Location, ES Mh.229 230 231 232 233 1234 235 236 237. 238 239 py; 241 242 243 204 95801 2 3 4 5 6 7 8 95991 2 3 4 5 6 7.8 S600m 2 3 41 5\ 6 7 8 96101 2 345 67 8 9

AntennaSpecication Specications Summary ITEM ModelName CenterFrequency SPEC. IBM2.4GHz 2402MHz 2441MHz 2480MHz 2.72 dBi 2.75dBi 2.75 dBi MAX. GAIN Polarization AzimuthBeamPattern Impedance AntennaLength 2.75 dBi Horizontal Omni-directional 50 3.3cm AntennaPhoto&Length(mm) 1.Mainantenna:2402MHz 1.1Horizontal Frequency(MHZ):

2402 AntennaPolarity:

Horizontal Maximum Value(dBi): 2. 72 Average Gain(dBi) :

-2.48 Minimum Gain(dBi):

-55.18 1.2Vertical Frequency(MHZ):

2402 AntennaPolarity:

Vertical MaximumValue(dBi):

-4.51 AverageGain(dBi):

-8.98 MinimumGain(dBi):

-62.3 2.Mainantenna:2441MHz 2.1Horizontal Frequency(MHZ):

2441 AntennaPolarity:

Horizontal Maximum Value(dBi): 2.75 Average Gain(dBi) :

-2.54 Minimum Gain(dBi):

-66.98 2.2Vertical Frequency(MHZ):

2441 AntennaPolarity:

Vertical MaximumValue(dBi):

-4.29 AverageGain(dBi):

-8.81 MinimumGain(dBi):

-51.4 2.Mainantenna:2480MHz 2.1Horizontal Frequency(MHZ):

2480 AntennaPolarity:

Horizontal Maximum Value(dBi): 2.75 Average Gain(dBi) :

-3.34 Minimum Gain(dBi):

-53.4 2.2Vertical Frequency(MHZ):

2480 AntennaPolarity:

Vertical MaximumValue(dBi):

-4.95 AverageGain(dBi):

-9.06 MinimumGain(dBi):

-60.00

RF_160, Issue 02 Micro-Star Int'l Co.,Ltd. Declaration of Authorization We Name:

Address:

City/Province:

Country:

Declare that:

Micro-Star Int'l Co.,Ltd. No.69, Lide St., Zhonghe Dist., New Taipei City 235, . Taiwan Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description: Wireless Keyboard Type designation: 8ZA4 Trademark: msi FCC ID : I4L-8ZA4 on our behalf. Date: 2022-07-22 City: New Taipei City 235 Name: Frank Hsiao Function: section manager Signature: . o Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

FCC, Request for non-disclosure RF_501, Issue 8 Date: 21-Nov-2018 Page 1 of 1 Company Name: Micro-Star Int'l Co.,Ltd. Address:

City:

Country:

No.69, Lide St., Zhonghe Dist., New Taipei City 235, Taiwan To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: I4L-8ZA4 Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):

Internal Photos Users Manual Test Set-up Photos External Photos Justification:

Date: 2022-07-22 Name and signature of applicant: Frank Hsiao o Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period