Micro Talk Systems Corp. J Chip System J Chip TAG Operation Manual Model No. MTJP-T01 Thank you very much for your purchasing J Chip Tag of J Chip System. Please read this Operation Manual and Warranty Certificate carefully before using to use this product correctly. Especially please read <Remarks for safety> very carefully without fail before using to use this product safely. Please also confirm <Date of purchasing and name of distributor> and then obtain the Certificate from the distributor. Serial No. is important from standpoint of ensuring safety. Please ensure Serial No. of the products together with the product itself when you purchase the equipment. INDEX Remarks for safety...........................................................34 To fix the tag....................................................................5 Specifications...................................................................5 FCC ID..............................................................................6 Please keep the following remarks for safety without fail To prevent the users and others from injury, damage and loss, we explain the following remarks to be obeyed without fail. We classify the following indications and explain the level of damage and loss to be occurred due to misuse based on ignorance of indications. WARNING This indicates the possibility of producing serious damage if you ignore this indication and misuse the equipment. REMARKS This indicates the possibility of producing serious damage or loss if you ignore this indication and misuse the equipment. We classify the following picture indications to be obeyed for explanation: (The following picture indications are examples.) This picture indication shows <Remark> to which we like you to pay your special attention. This picture indication shows <Prohibition> which we like you to prohibit. This picture indication shows <Instruction> which we like you to perform without fail. WARNING Please refrain from dismantling or/and altering the product. Please refrain from putting the product into Tag slot of Tag Charger with wet hand(s). It might cause damage of case and cause trouble. It might cause an electric shock. No dismantling. No wet hand(s). REMARKS Please refrain from using the product up to the time when built-in battery runs out completely. Life span of battery might be reduced remarkably in case you use the product up to the time when built-in battery becomes empty. Please refrain from dropping the product from high place. It might cause a trouble, as it is precision equipment. Please fix the product to the correct place, as this product and Reader Antenna have a right electro-
magnetic direction. Please refrain from putting the product in water or fixing it in place which receives water. It might cause trouble. Please keep the following remarks for safety without fail When you fix the product, Please keep the following remarks. Please pay your attention to right electro-magnetic direction between this product and Reader Antenna for fixing the product. Please refrain from putting this product place which is subjected vibration or shocks. It might cause trouble, as vibration and shock might damage the internal parts of the product. Please fix the product to the place which is durable for the weight of the product. When you use the equipment, Please check with present position of built-in battery before using to ensure that it is usable. When you maintain the equipment, Please wipe the J Chip Tag by soft and dry cloth. In case it is very dirty, please dip the cloth into thinned kitchen detergent and wring it out well then clean it carefully. In case you use a chemical duster, please note the remarks of the product. To fix the Tag
(Please pay your special attention to the right electro-magnetic direction.) You can fix the Tag to chest of each athlete. You can fix the Tag to the back of Bib number by plastic tape which is wider than the width of the Tag. When you fix the Tag, please pay your special attention to the right electro-magnetic direction between the Tag and Reader Antenna. Direction of Tag to be fixed. Please fix the Tag directed to the right position as follows:
You can fix the Tag to the place where is up to about 1.5m---1.8m high above from Trigger Antenna. When you fix the Tag, please check with Receiver before using to ensure that it can be firmly measured Specifications Transmitting Frequency Weight Outer dimension ID Indication method Right direction to electro-magnetic zone 300Mhz Band 3
(to be fixed by ID) About 9.5g W 44D28H7.7 Seal as drawing of out side view above is attached to each Tag mentioning 1 character for the user, 6 Serial numbers indicated by 16 notation. FCC ID FCC ID: ZFQMTJP-T01-04 FCC ID: ZFQMTJP-T01-09 FCC ID: ZFQMTJP-T01-14 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT.