FCC ID: 2ADHK77V90 EV77V90A

EV77V90A Regulatory Compliance Information Revision 0.4 Oct 2023 Preliminary 1 Revision 0.4 (10/2023) This document contains the Regulatory Compliance information which will be part of the EV77V90A (ATAB8510B) datasheet and related documents shared with customers. Preliminary 2 Revision 0.4 (10/2023) 1.0 Usage Instructions This equipment (EV77V90A/ATAB8510B) is an evaluation board that is not directly marketed or sold to the general public through retail; it is only sold through authorized distributors or through Microchip. Using this equipment requires a significant engineering expertise towards understanding of the tools and relevant technology, which can be expected only from a person who is prof essionally trained in the technology. The user must comply with all the instructions provided by the Grantee, which indicate installation and/or operating conditions necessary f or compliance. 2.0 Antenna Considerations The approved antenna consists of a magnetic loop PCB-trace that is permanently attached to the board. 3.0 Regulatory Approval This equipment has received regulatory approval f or the f ollowing countries:

United States/FCC ID: 2ADHK77V90 Canada/ISED:

IC ID: 20266-77V90 o o HVIN: EV77V90A European Union/CE 3.1.0 United States This equipment has been approved f or use in the United States under Federal Communications Commission (FCC) CFR47 Telecommunications, Part 15 Subpart C Intentional Radiators. 3.1.1 Labeling and User Information The FCC ID label has been permanently affixed to equipment on the top silkscreen layer of the board and is visible, as well as, legible to the user. Due to the size of the equipment, the f ollowing compliance statements are included in the user manual:

This device complies with part 15 of the FCC Rules. Operation is subject to the f ollowing two conditions:

(1) This device may not cause harmf ul interf erence, and

(2) this device must accept any interf erence received, including interf erence that may cause undesired operation. NOTE: This equipment has been tested and f ound to comply with the lim its f or a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf ul interf erence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmf ul interf erence to radio communications. However, there is no guarantee that interf erence will not occur in a particular installation. If this equipment does cause harmf ul interf erence to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to try to correct the interf erence by one or more of the f ollowing measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dif f erent f rom that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician f or help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Preliminary 3 Revision 0.4 (10/2023) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body. FCC NOTICE: This kit is designed to allow:

(1) Product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a f inished product and

(2) Sof tware developers to write software applications f or use with the end product. This kit is not a f inished product and when assembled may not be resold or otherwise marketed unless all required FCC equipment authorizations are first obtained. Operation is subject to the condition that this product not cause harmf ul interf erence to licensed radio stations and that this product accept harmf ul interf erence. Unless the assembled kit is d esigned to operate under part 15, part 18 or part 95 of this chapter, the operator of the kit must operate under the authority of an FCC license holder or must secure an experimental authorization under part 5 of this chapter. The kit is labeled with the f ollowing legend: For evaluation only; not FCC approved f or resale;

3.1.2 Approved Antenna Types To maintain compliance in the United States, only the antenna type that has been tested shall be used. Testing of this equipment was perf ormed with the antenna type listed in the Antenna Considerations section above. 3.1.3 Helpful Websites Federal Communications Commission (FCC):

https://www.f cc.gov/

FCC Of f ice of Engineering and Technology (OET) Laboratory Division Knowledge Database

(KDB):

https://apps.f cc.gov/oetcf /kdb/index.cf m. 3.2.0 Canada This equipment has been approved f or use in Canada under Innovation, Science and Economic Development Canada (ISED, formerly Industry Canada) Radio Standards Specif ication (RSS) RSS-

210. 3.2.1 Labeling and User Information The ISED ID label has been permanently affixed to the equipment on the top silkscreen layer of the board and is visible, as well as, legible to the user. Due to the size of the equipment, the f ollowing compliance statement is included in the user manual:

This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the f ollowing two conditions:

(1) this device may not cause interf erence, Preliminary 4 Revision 0.4 (10/2023)

(2) this device must accept any interf erence, including interf erence that may cause undesired operation of the device. This equipment complies with ISED radiation exposure limits set f orth f or an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body. Lmetteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le f onctionnement. Cet quipement est conforme aux limites d'exposition aux rayonnements de la ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et un corps humain. 3.2.2 Approved Antenna Types To maintain compliance in Canada, only the antenna type that has been tested shall be used. Testing of this equipment was performed with the antenna type listed in the Antenna Considerations section above. 3.2.3 Helpful Websites Industry Canada:

http://www.ic.gc.ca/

3.3.0 European Union This equipment has been assessed f or use in European Union (EU) countries under the Radio Equipment Directive (RED) 2014/53/EU, European Telecommunications Standards Institute (ETSI) EN 300 220-2, and EN 62368-1. 3.3.1 Labeling Information The CE mark has been permanently affixed to equipment on the bottom silkscreen layer of the board and is visible, as well as, legible to the user. 3.3.2 Approved Antenna Types To maintain compliance in the EU, only the antenna type that has been tested shall be used. Testing of this equipment was performed with the antenna type listed in the Antenna Considerations section above. 3.3.3 Simplified EU Declaration of Conformity Hereby, Microchip Technology Inc. declares that the radio equipment type EV77V90A is in compliance with Directive 2014/53/EU. The f ull text of the EU declaration of conf ormity f or this product is available at www.microchip.com/design-centers/wireless-connectivity/. Preliminary 5 Revision 0.4 (10/2023) 3.3.4 Helpful Websites A document that can be used as a starting point in understanding the use of Short-Range Devices

(SRD) in the EU is the European Radio Communications Committee (ERC) Recommendation 70-03 E, which can be downloaded f rom the European Communications Committee (ECC) at:

https://docdb.cept.org/. Additional helpf ul websites are:

Radio Equipment Directive (2014/53/EU):

https://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/red_en European Conf erence of Postal and Telecommunications Administrations (CEPT):

http://www.cept.org European Telecommunications Standards Institute (ETSI):

http://www.etsi.org The Radio Equipment Directive Compliance Association (REDCA):

http://www.redca.eu/

Preliminary 6 Revision 0.4 (10/2023)

EV77V90A Label and Label Location Revision 0.1 Feb 2023 Prelimina ry 1 Revi sion 0.1 (2/2023) This document contains the Label and Label Location information for the EV77V90A (ATAB8510B). Prelimina ry 2 Revi sion 0.1 (2/2023) Label is affixed to the top silkscreen layer of the board and is located as shown in the following:

. o N n o i t a c i f i t r e C C I

C C F Prelimina ry 3 Revi sion 0.1 (2/2023)

Authority to Act as Agent Date: 2023-06-29 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern:

I appoint TUV Rheinland of North American Inc., 1279 Quarry Lane, Suite A, Pleasanton, CA 94566, USA to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with ____Microchip Technology Inc._/ 2355 West Chandler Blvd. Chandler, Arizona, USA 85224-6199____. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date:

29 June 2023 Agreement is valid for 12 months from the above date. By:

(Signature) HRUSHIKESH VASUKI

(Print name) Appointed Vice President WSG

(Title)

+1 480-437-0762

(Telephone) _ __ On behalf of:

Microchip Technology Inc._____

(Company Name) Microchip Technology Incorporated 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Main Office 480-792-7200 Fax 480-899-9210

Antenna Declaration Federal Communications Commission /

Innovation, Science and Economic Development Canada RE:

Antenna Declaration EV77V90A (Model: ATAB8510B-V2.0) FCC ID: 2ADHK77V90, IC: 20266-77V90 It's hereby declared that the model, ATAB8510B-V2.0, is only testing radiated and is accounted for as a result of the measurement such as field strength measurements on a part 15.249 or 15.231 device. So the gain does not necessarily need to be verified. However, enough information regarding the construction of the antenna shall be provided . The model ATAB8510B-V2.0 is only radiated measurements are used to show compliance with limits for fundamental and spurious emissions. Antenna Brand name: Microchip Antenna Model name: ATAB8510B-V2.0 loop antenna Antenna Type: a PCB with a printed magnetic loop antenna Antenna Frequency Range: 433.92 MHz Sincerely yours, Applicant Signature Printed Name: HRUSHIKESH VASUKI Title: Vice President, Business Unit General Manager, WSG Address: 2355 West Chandler Blvd. Chandler, Arizona 85224-6199, United States Tel.: 480-792-0762 Email: rishi.vasuki@microchip.com

Certification Designating Applicant as FCC US Agent To: Federal Communications Commission Date: 06-29-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement Part 2.911(d)(7) filing FCC ID: 2ADHK77V90 Microchip Technology Inc. (the applicant) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledge the applicants consent and the designated agent for service of processs obligation to accept service of process. The applicant acknowledge the applicants acceptance to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledge the responsibility to inform the FCC whenever the agent information changes. Designated U.S. Agent from Applicant Company Company Name: Microchip Technology Inc. Contact Person: HRUSHIKESH VASUKI Address: 2355 West Chandler Blvd. Chandler, Arizona, USA 85224-6199 Tel.: +1-480-437-0762 Email: rishi.vasuki@microchip.com FCC FRN: 0001596279 Sincerely yours, Signature Printed Name: HRUSHIKESH VASUKI Title: Appointed Vice President WSG Microchip Technology Incorporated 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Main Office 480-792-7200 Fax 480-899-9210

Date: 2023-06-29 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2ADHK77V90 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent n/a Permanent Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photo Internal Photos ***

Operation Description/Theory of Operation Schematics Test Setup***

Tune-Up Procedure Users Manual***

Part List/ Antenna Construction Microchip Technology Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public.

(*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

(Signature) _HRUSHIKESH VASUKI / Appointed Vice President WSG_

(Print name/Title) Tel: +1-480-792-0762 Email: rishi.vasuki@microchip.com Microchip Technology Incorporated 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Main Office 480-792-7200 Fax 480-899-9210

5-Sep-23 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ADHK77V90 Models: ATAB8510B-V2.0 (ATA8510) ATA5831-XPRO (ATA5831, ATA5833, ATA5781, ATA5782, ATA5785, ATA8510, ATA8515, ATA8210, ATA8215, ATA8710) Declaration on Similarity We herewith confirm that for the models listed above the RF Transmitter Module is Electrically Identical. The differences are in the model numbers, memory size and available peripheral. The main model ATAB8510B-V2.0 (ATA8510) has TX functionality, RX functionality, and flash memory. In the other models, some of the functions are disabled. All models have flash memory, the use of flash memory must be defined during the programming of the product, when delivered to the customer, flash memory is default disabled. TX RX Flash Comment ATA8510 X X X main model ATA8510 = ATA5831, just a different number for another market segment. ATA58xx is for the automotive market and ATA5831 X X X ATA85xx for the industrial market. ATA5833 X X same as ATA5831. The difference is just the missing memory Does not have the flash memory. All TX and RX features are the ATA8515 = ATA5833, just a different number for another market segment. ATA58xx is for the automotive market and ATA8515 X X ATA85xx for the industrial market. ATA8710 X X ATA8710 RX function disabled. TX function is equal to ATA5831 ___________________ HRUSHIKESH VASUKI

(Signature)

(Printed) Microchip Technology Incorporated 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Main Office 480-792-7200 Fax 480-899-9210

Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 06-29-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2ADHK77V90

[Microchip Technology Inc.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely yours, Applicant Signature Printed Name: HRUSHIKESH VASUKI Title: Appointed Vice President WSG Address: 2355 West Chandler Blvd. Chandler, Arizona, USA 85224-6199 Tel.: 1 480-437-0762 Email: rishi.vasuki@microchip.com Microchip Technology Incorporated 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Main Office 480-792-7200 Fax 480-899-9210

Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 06-29-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2ADHK77V90

[Microchip Technology Inc.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: HRUSHIKESH VASUKI Title: Appointed Vice President WSG Address: 2355 West Chandler Blvd. Chandler, Arizona, USA 85224-6199 Tel.: +1-480-437-0762 Email: rishi.vasuki@microchip.com Microchip Technology Incorporated 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Main Office 480-792-7200 Fax 480-899-9210