FCC ID: ZQO-CY920C Network Media Module

CY920 Getting Started Guide 2014 Microchip Technology Inc. DS50002260B Note the following details of the code protection feature on Microchip devices:

Microchip products meet the specification contained in their particular Microchip Data Sheet. Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchips Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. Microchip is willing to work with the customer who is concerned about the integrity of their code. Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as unbreakable. Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchips code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyers risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV

== ISO/TS 16949 ==

Trademarks The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, flexPWR, JukeBlox, KEELOQ, KEELOQ logo, Kleer, LANCheck, MediaLB, MOST, MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. The Embedded Control Solutions Company and mTouch are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit Serial Programming, ICSP, Inter-Chip Connectivity, KleerNet, KleerNet logo, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, RightTouch logo, REAL ICE, SQI, Serial Quad I/O, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. GestIC is a registered trademarks of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. 2014, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. ISBN:

Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Companys quality system processes and procedures are for its PIC MCUs and dsPIC DSCs, KEELOQ code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchips quality system for the design and manufacture of development systems is ISO 9001:2000 certified. DS50002260B-page 2 2014 Microchip Technology Inc. CY920 GETTING STARTED GUIDE Table of Contents Preface ........................................................................................................................... 5 Chapter 1. Introduction 1.1 CY920 Module Block Diagram ..................................................................... 12 1.2 CY920 Module Top and Bottom View .......................................................... 13 1.3 Evaluation Board Functionality and Features ............................................... 15 Chapter 2. Evaluating CY920 Board 2.1 Connecting CY920 Module, CE2 Board, and Interconnect Card ................. 17 Chapter 3. Network Configuration 3.1 Configuring CY920 in Ethernet Mode ........................................................... 21 3.2 Configuring CY920 in Wi-Fi Mode ............................................................. 23 Chapter 4. Audio Streaming 4.1 AirPlay Streaming ......................................................................................... 27 4.2 DLNA Streaming .......................................................................................... 28 Worldwide Sales and Service .................................................................................... 30 2014 Microchip Technology Inc. Preliminary DS50002260B-page 3 CY920 Getting Started Guide NOTES:

DS50002260B-page 4 Preliminary 2014 Microchip Technology Inc. CY920 GETTING STARTED GUIDE Preface NOTICE TO CUSTOMERS All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available. Documents are identified with a DS number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is DSXXXXXXXXA, where XXXXXXXX is the document number and A is the revision level of the document. INTRODUCTION This chapter contains general information that will be useful to know before using the CY920 Network Media module. Items discussed in this chapter include:

Document Layout Conventions Used in this Guide Recommended Reading The Microchip Web Site Development Systems Customer Change Notification Service Customer Support Document Revision History DOCUMENT LAYOUT This guide describes information on evaluating the CY920 Network Media module using the Evaluation board (CE2). The document is organized as follows:

Chapter 1. Introduction provides a brief description of the CY920 module fea-

tures. It also covers functionality and features of the CE2 board. Chapter 2. Evaluating CY920 Board describes information on how to evaluate the CY920 module using the CE2 Board. Chapter 3. Network Configuration describes configuring the CY920 module using Ethernet or Wi-Fi mode. Chapter 4. Audio Streaming describes the CY920 module supported various sources of audio streaming informations. 2014 Microchip Technology Inc. Preliminary DS50002260B-page 5 CY920 Getting Started Guide CONVENTIONS USED IN THIS GUIDE This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS Description Represents Examples Italic characters Initial caps Quotes Underlined, italic text with right angle bracket Bold characters Referenced books Emphasized text A window A dialog A menu selection A field name in a window or dialog A menu path A dialog button A tab Text in angle brackets < > A key on the keyboard Plain Courier New Sample source code Filenames File paths Keywords Command-line options Bit values Constants A variable argument Italic Courier New Square brackets [ ]

Optional arguments Curly brackets and pipe character: { | }

Ellipses... Notes Choice of mutually exclusive arguments; an OR selection Replaces repeated text Represents code supplied by user A Note presents information that we want to re-emphasize, either to help you avoid a common pitfall or to make you aware of operating differences between some device family members. A Note can be in a box, or when used in a table or figure, it is located at the bottom of the table or figure. MPLAB IDE Users Guide

...is the only compiler... the Output window the Settings dialog select Enable Programmer Save project before build File > Save Click OK Click the Power tab Press <Enter>, <F1>

#define START autoexec.bat c:\mcc18\h _asm, _endasm, static

-Opa+, -Opa-

0, 1 0xFF, A file.o, where file can be any valid filename mcc18 [options] file

[options]

errorlevel {0|1}

var_name [, var_name...]

void main (void)

{ ...

}

Note: This is a standard note box. CAUTION This is a caution note. Note 1: This is a note used in a table. DS50002260B-page 6 Preliminary 2014 Microchip Technology Inc. Preface RECOMMENDED READING The following Microchip documents are available and recommended as supplemental reference resources. JukeBlox Technology 4.X SDK User's Guide (DS70005181) DM920 Multi-Core Network Media Processor System-on-Chip (SoC) with Integrated Wi-Fi Data Sheet (DS60001278) CY920 Network Media Module Data Sheet (DS60001270) THE MICROCHIP WEB SITE Microchip provides online support via our web site at: http://www.microchip.com. This web site makes files and information easily available to customers. Accessible by most Internet browsers, the web site contains the following information:

Product Support Data sheets and errata, application notes and sample programs, design resources, users guides and hardware support documents, latest software releases and archived software General Technical Support Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listings Business of Microchip Product selector and ordering guides, latest Microchip press releases, listings of seminars and events; and listings of Microchip sales offices, distributors and factory representatives 2014 Microchip Technology Inc. Preliminary DS50002260B-page 7 CY920 Getting Started Guide DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE Microchips customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest. To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions. Advanced RISC Machine (ARM) Development Studio 5 (DS-5) is used to develop software on JukeBlox 4.X. ARM Development Studio 5 (DS-5) can be downloaded from ARM web site. Latest version of the product DS-5 V5.13 (Windows) is available; link to download DS-5 is as follows:

http://www.arm.com/products/tools/software-tools/ds-5/ds-5-downloads.php License required for compiling CY920 SDK code is DS-5 Pro. When purchasing the license, it is suggested that customers should check if the license supports DS - 5 as well. CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels:

Distributor or Representative Local Sales Office Field Application Engineer (FAE) Technical Support Customers should contact their distributor, representative or field application engineer

(FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at: http://support.microchip.com. DS50002260B-page 8 Preliminary 2014 Microchip Technology Inc. Preface DOCUMENT REVISION HISTORY Revision A (April 2014) This is the initial release of the document. Revision B (October 2014) This revision includes the following updates:

Figures: Figure 1-4, Figure 2-2, Figure 3-1 and Figure 3-2 Examples: Example 4-1, Example 3-2 Tables: Table 3-1 Section 1.3 Evaluation Board Functionality and Features Section 3.2.2 Secured Wi-Fi Mode Setup 2014 Microchip Technology Inc. Preliminary DS50002260B-page 9 CY920 Getting Started Guide NOTES:

DS50002260B-page 10 Preliminary 2014 Microchip Technology Inc. CY920 GETTING STARTED GUIDE Chapter 1. Introduction Thank you for purchasing the CY920 Network Media module. The CY920 module is built on a single DM920 System-on-Chip (SoC). The feature-rich CY920 module comes along with connectivity features, such as USB 2.0, Wi-Fi 802.11a/b/g/n, Bluetooth v2.1 + EDR and 10/100 T Mbps Ethernet. This document is intended to help users to evaluate the CY920 Network Media module using the Evaluation board (CE2). It also provides procedure to perform AirPlay and DLNA streaming. It is assumed that the user of this document has prior knowledge of Airplay and DLNA. This chapter covers the following topics:

CY920 Module Block Diagram CY920 Module Top and Bottom View Evaluation Board Functionality and Features 2014 Microchip Technology Inc. Preliminary DS50002260B-page 11 CY920 Getting Started Guide 1.1 CY920 MODULE BLOCK DIAGRAM Figure 1-1 illustrates the features of the CY920 module. The CY920 module has various hardware configurations, known as Stock Keeping Units (SKUs). The hardware features of the CY920 module can vary depending on the SKUs used. For more information on SKUs used in the CY920 module, refer to the Ordering Guide section in the CY920 Network Media Module Data Sheet (DS60001270). FIGURE 1-1:

CY920 NETWORK MEDIA MODULE BLOCK DIAGRAM 2.5V 3.3V 1.25V 1.8V 3.3V RTC Reset In RJ-45

+

Transformer USB Type-A/Lightning Optional External Serial Flash Apple Coprocessor HDMI Tx Audio A/D, D/A Host Controller CY920 Network Media Module DM920 SoC DDR2 Controller UART 0 GPIO 802.11 a/b/g/n 10/100 Mbps Ethernet PHY Serial Flash 16 MByte HD Data I2S, S/PDIF Debug Port RST Ethernet Controller USB 2.0 OTG SPI 1 I2C HD Ports AV Ports UART 1 JTAG SPI 0 GPIO DDR2 SDRAM 64 MByte 26.000 MHz Bluetooth Baseband and RF 2.4/5 GHz FEM Antenna Switch WiFi/BT Antenna Socket Wi-Fi Antenna Socket 40.000 MHz DS50002260B-page 12 Preliminary 2014 Microchip Technology Inc. Introduction 1.2 CY920 MODULE TOP AND BOTTOM VIEW This section provides the top and bottom view of the CY920 module with RF shield. Figure 1-2 shows the top view of the CY920 module with RF shield. FIGURE 1-2:

CY920 MODULE (TOP VIEW) 2014 Microchip Technology Inc. Preliminary DS50002260B-page 13 CY920 Getting Started Guide Figure 1-3 shows the bottom view of the CY920 module with RF shield. It also features the following key components:

1. Basic Connector 2. Extended Connector (optional) The extended connector is not available for certain SKUs of the CY920 module. FIGURE 1-3:

CY920 MODULE (BOTTOM VIEW) 2 1 DS50002260B-page 14 Preliminary 2014 Microchip Technology Inc. 1.3 EVALUATION BOARD FUNCTIONALITY AND FEATURES Introduction The Evaluation board (CE2) is a development base board with all the input and output interfaces to the CY920 module.The CE2 board has the following key features, as indicated by the corresponding numbers in Figure 1-4. 1. Antenna Upgrade Kit for connecting the external RF antennas to the CE2 board. The Antenna Upgrade Kit includes two antennas and extended connecting cables to the module. 2. X2 connector, mounted on the CE2 board for inserting the CY920 interconnect card. 3. USB to serial adapter or RS232 cable connection to the CE2 board 4. Ethernet cable connection to the CE2 board 5. Ultra Small Surface Mount Coaxial (U.FL) connectors, used for connecting the external RF antennas 6. Speaker or headphone connection to the CE2 board 7. I/O Expander card connection at the X13 location (tuner module connector) on the CE2 board. 8. ACP 2.0C connection to the CE2 board FIGURE 1-4:

EVALUATION BOARD WITH VARIOUS CONNECTIONS 1 3 7 6 2 8 4 5 1 2014 Microchip Technology Inc. Preliminary DS50002260B-page 15 CY920 Getting Started Guide NOTES:

DS50002260B-page 16 Preliminary 2014 Microchip Technology Inc. CY920 GETTING STARTED GUIDE Chapter 2. Evaluating CY920 Board This chapter describes evaluating the CY920 module using the CE2 board. The CY920 module is not a stand-alone module and it must be hosted on an interconnect card before connecting it to the CE2 board. The following sections provide prerequisites for connecting the CE2 board and various inputs and outputs interfaces:

EVM CE2 board with two antennas Interconnect card Authentication co-processor ACP 2.0C (compatible with the CE2 board) Power adapter (supplied along with the CE2 board (9V/2.0A)) USB to serial converter for UART connection between computer and CE2 board Speaker or headphone Wi-Fi Access Point (AP) 2.1 CONNECTING CY920 MODULE, CE2 BOARD, AND INTERCONNECT CARD To connect the CY920 module, CE2 board and interconnect card, follow these steps:

1. Connect the CY920 module to the interconnect card as shown in Figure 2-1. FIGURE 2-1:

CY920 MODULE AND INTERCONNECT CARD ASSEMBLY 2014 Microchip Technology Inc. Preliminary DS50002260B-page 17 CY920 Getting Started Guide 2. Connect the CY920 module and the interconnect card assembly to the connector X2 (200 pin SODIMM connector) on the CE2 board, see Figure 1-4. Ensure that the edge of the interconnect card must be aligned to the X2 connector and it is inserted at an angle shown in Figure 2-2. Push the interconnect card down to lock it on both the sides of the X2 connector. FIGURE 2-2:

INTERCONNECT CARD CONNECTED TO CE2 BOARD 3. To view shell logs, connect the USB to the serial adapter or connect the RS232 cable to the CE2 board, see Figure 1-4. 4. Use a serial terminal tool, Tera Term, for monitoring the RS232 serial data, see Figure 2-3. FIGURE 2-3:

TERA TERM WINDOW TO SELECT COM PORT DS50002260B-page 18 Preliminary 2014 Microchip Technology Inc. Evaluating CY920 Board 5. Configure the user console on a computer using the Serial port setup, see Figure 2-4. FIGURE 2-4:

SERIAL PORT SETUP 6. Power on the CE2 board using the power adapter, see Figure 2-5. FIGURE 2-5:

POWER JACK CONNECTOR 7. On powering, the Bootloader software is executed. If a valid application is found, the booting sequence will be completed and the device starts in normal mode. 8. When the application is running, continue to press <Enter> until the sds://

shell command is displayed on the window, see Figure 2-6. 2014 Microchip Technology Inc. Preliminary DS50002260B-page 19 CY920 Getting Started Guide FIGURE 2-6:

WINDOW DISPLAYING SHELL PROMPT DS50002260B-page 20 Preliminary 2014 Microchip Technology Inc. CY920 GETTING STARTED GUIDE Chapter 3. Network Configuration The CY920 module can be configured using Ethernet or Wi-Fi mode. To check whether a particular SKU can support Ethernet or Wi-Fi mode, refer to the Ordering Guide sec-

tion in the CY920 Network Media Module Data Sheet (DS60001270). 3.1 CONFIGURING CY920 IN ETHERNET MODE Some of the CY920 module SKUs have provision for Ethernet mode. To connect the CY920 module to Ethernet mode, the set up needs an AP with Dynamic Host Control Protocol (DHCP) support. You must connect the CE2 board to the AP using an Ethernet cable. Figure 1-4 shows the Ethernet cable is connected to the CE2 board. To set up the CY920 module in Ethernet mode, perform the following steps:

1. Set up the CE2 board, see 2.1 Connecting CY920 Module, CE2 Board, and Interconnect Card. 2. Power on the CY920 module and wait till the sds:// shell command to display, or press <Enter> until the shell command prompt appears. 3. Configure the CnE value CurrentMode to wired, which is available on the following path cne/Application/NetIF, see Example 3-1. SHELL COMMAND EXAMPLE 3-1:

cd cne/Application/NetIF ls v set CurrentMode wired ls -v 4. Reboot the CY920 module and wait for the sds:// shell command to display on the window. 5. Run the netcfg command to confirm whether the CY920 module is connected to the network or not. 6. The acquired IP address of the Digital Media Player (DMP) device will be displayed on the window, see Figure 3-1. 2014 Microchip Technology Inc. Preliminary DS50002260B-page 21 CY920 Getting Started Guide FIGURE 3-1:

DISPLAYING ACQUIRED IP ADDRESS 7. If IP address of the DMP device is not acquired, IP address will not be displayed on the window, see Figure 3-2. FIGURE 3-2:

DISPLAY WHEN IP ADDRESS NOT ACQUIRED DS50002260B-page 22 Preliminary 2014 Microchip Technology Inc. 3.2 CONFIGURING CY920 IN Wi-Fi MODE Network Configuration The CY920 module can be configured in two Wi-Fi modes: an unsecured (open) mode or a secured mode. The CY920 module has two U.FL connectors for connecting the external RF antennas mounted on the CE2 board. Figure 1-4 shows the U.FL connec-

tors used for connecting the antennas. 3.2.1 To configure the CY920 module in an unsecured Wi-Fi mode, follow these steps:

1. Set up the CE2 board, see 2.1 Connecting CY920 Module, CE2 Board, and Unsecured Wi-Fi Mode Setup Interconnect Card. 2. Power on the CY920 module and wait for the sds:// shell command to appear on the window, or press <Enter> until the shell command prompt appears. 3. Run the following command in the shell prompt: cd cne/Networking/DrvCfg/

WlanCfg/Profilel. 4. Set the user SSID as set SSID <APSSID>. Where, APSSID is the SSID of the AP. 5. Set the security to none set Security NONE. 6. Reboot the CY920 module and run the netcfg command to verify whether the CY920 module is acquired an IP address or not. Secured Wi-Fi Mode Setup 3.2.2 The CY920 module can be configured on the different, secured Wi-Fi security modes, refer to Chapter 3. Wireless Network Configuration in JukeBlox Technology 4.X SDK Users Guide (DS70005181). This section only describes the WPAPSK Wi-Fi security setup method. To configure the CY920 module in the WPAPSK Wi-Fi security mode, follow these steps:

1. Set up the CE2 board, see 2.1 Connecting CY920 Module, CE2 Board, and Interconnect Card. 2. Power on the CY920 module and wait for the sds:// shell command to appear on the window, or press <Enter> until the sds:// shell command is displayed. 3. Configure the CnE value CurrentMode to wireless or autosense, which is available on the following path cne/Application/NetIF, see Example 3-3. 4. Run the following command in the shell prompt: cd cne/Networking/DrvCfg/

WlanCfg/Profile1. Where, Profile1 is the active profile. 5. Set security and cipher, according to the Home AP, using the security configuration map provided in Table 3-1. TABLE 3-1:

SECURITY CONFIGURATION MAP Security setting at AP Disabled WEP Security None WEP DMP Cipher WEP Key Key index WEP Key WPA2PSK and AES Any other settings WPA2PSK or WPAWPA2PSK WPAWPA2PSK CCMP or AES TKIPCCMP Key index number 2014 Microchip Technology Inc. Preliminary DS50002260B-page 23 CY920 Getting Started Guide 6. The security CnE parameter is located at the following location: cne/Network-

ing/DrvCfg/WlanCfg/Profile1. The CnE parameter for cipher and pass-

pharse are located at cne/Networking/DrvCfg/WlanCfg/Profile1/WPAPSK. 7. Example 3-2 provides examples to set the credentials for a AP configured with WPA2PSK and AES. EXAMPLE 3-2:

CREDENTIALS FOR AP CONFIGURATION WITH WPA2PSK AND AES set cne/Networking/DrvCfg/WlanCfg/Profile1/Security WPAWPA2PSK set cne/Networking/DrvCfg/WlanCfg/Profile1/WPAPSK/Cipher AES 8. Set the passphrase: set Passphrase <APPassphrase>. Where, APPass-

phrase is the Passphrase used by the AP. The WPAPSK Wi-Fi configuration details will be displayed on the window, see Figure 3-3. FIGURE 3-3:

WPAPSK METHOD 9. Reboot the CY920 module and wait for the sds:// shell command to display. Ensure that the Ethernet cable is not connected. 10. Once the shell prompt is displayed, run the netcfg command to verify whether the CY920 module is acquired an IP address or not. Note: The system might require several seconds to acquire an IP address, and it depends on the characteristics of the network. DS50002260B-page 24 Preliminary 2014 Microchip Technology Inc. Network Configuration Optional: Users can list all the preceding commands in the Wireless_Set-

ting.txt file and copy all the commands to a serial terminal tool, Tera Term, to configure the CY920 module in the WPAPSK Wi-Fi security mode, see Example 3-3, Wireless_Setting.txt FILE EXAMPLE 3-3:

cd cne cd Application/NetIF set mode wireless cd /cne/Networking/DrvCfg/WlanCfg/Profile1 set SSID BCO-T1 set Security WPAWPA2PSK cd WPAPSK set Cipher AES set Passphrase WelCome!23 sys reboot 2014 Microchip Technology Inc. Preliminary DS50002260B-page 25 CY920 Getting Started Guide NOTES:

DS50002260B-page 26 Preliminary 2014 Microchip Technology Inc. CY920 GETTING STARTED GUIDE Chapter 4. Audio Streaming The CY920 module supports various sources of audio streaming; however, this chapter only covers AirPlay and DLNA streaming details. 4.1 AIRPLAY STREAMING Perform the following steps for the Airplay streaming:

1. Set up the CE2 board, see 2.1 Connecting CY920 Module, CE2 Board, and Interconnect Card. 2. Configure the CY920 module network using Ethernet or Wi-Fi mode, see Chap-

ter 3. Network Configuration. 3. Use an iOS device or a computer that has the latest iTunes installed. Configure the iOS device or computer to the same network as that of the CY920 module. 4. Connect the speaker to audio out pin of the CE2 board as shown in Figure 1-4. Ensure that the ACP 2.0C is connected to the CE2 board. 5. Open the iTunes from the iOS device or computer. If the CY920 module and the iOS device or computer is on the same network, the Airplay symbol will be lit up as shown in Figure 4-1. FIGURE 4-1:

DMP AND iTUNES IN THE SAME NETWORK 6. Select the CY920 module by pressing the Airplay symbol, see Figure 4-2. FIGURE 4-2:

SELECTING THE AIRPLAY ENABLED DMP 7. After the CY920 module is selected, authentication with iTunes and the device happens automatically. 8. On successful authentication, press Play button on iTunes for audio streaming. 2014 Microchip Technology Inc. Preliminary DS50002260B-page 27 CY920 Getting Started Guide 4.2 DLNA STREAMING Perform the following steps for the DLNA streaming:

1. Set up the CE2 board, see 2.1 Connecting CY920 Module, CE2 Board, and Interconnect Card. 2. Configure the CY920 module network using Ethernet or Wi-Fi mode, see Chap-

ter 3. Network Configuration. 3. Connect the computer and the CY920 module to the same network. 4. Connect the speaker to an audio out pin of the CE2 board, see Figure 1-4. 5. To enable the audio decoders, configure the CnE values cne\cneGroup to 1 as shown in Example 4-1. ENABLING AUDIO DECODER VALUES EXAMPLE 4-1:

cd cne\cneGroup set IsflacEnabled 1 set IsaacEnabled 1 set IsoggEnabled 1 set Ismp3Enabled 1 set IsaiffEnabled 1 set IswmaEnabled 1 set IsUPnPEnabled 1 set IsalacEnabled 1 set Ismp4Enabled 1 set IsDSDEnabled 1 6. Reboot the CY920 module. 7. Run Microsoft Windows Media Player 12 (WMP 12) on the computer and perform the WMP 12 Play To setup procedure provided in the Microsoft web site: http://windows.microsoft.com/en-IN/windows7/using-the-play-to-feature-to-

stream-media. DS50002260B-page 28 Preliminary 2014 Microchip Technology Inc. NOTES:

2014 Microchip Technology Inc. Preliminary DS50002260B-page 29 Worldwide Sales and Service AMERICAS Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support:

http://www.microchip.com/

support Web Address:

www.microchip.com Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Austin, TX Tel: 512-257-3370 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Tel: 248-848-4000 Houston, TX Tel: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 New York, NY Tel: 631-435-6000 San Jose, CA Tel: 408-735-9110 Canada - Toronto Tel: 905-673-0699 Fax: 905-673-6509 ASIA/PACIFIC Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2943-5100 Fax: 852-2401-3431 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 China - Hangzhou Tel: 86-571-8792-8115 Fax: 86-571-8792-8116 China - Hong Kong SAR Tel: 852-2943-5100 Fax: 852-2401-3431 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 China - Shenzhen Tel: 86-755-8864-2200 Fax: 86-755-8203-1760 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 ASIA/PACIFIC India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 India - Pune Tel: 91-20-3019-1500 Japan - Osaka Tel: 81-6-6152-7160 Fax: 81-6-6152-9310 Japan - Tokyo Tel: 81-3-6880- 3770 Fax: 81-3-6880-3771 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 Taiwan - Kaohsiung Tel: 886-7-213-7830 Taiwan - Taipei Tel: 886-2-2508-8600 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 EUROPE Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany - Dusseldorf Tel: 49-2129-3766400 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Germany - Pforzheim Tel: 49-7231-424750 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Italy - Venice Tel: 39-049-7625286 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Poland - Warsaw Tel: 48-22-3325737 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Stockholm Tel: 46-8-5090-4654 UK - Wokingham Tel: 44-118-921-5800 Fax: 44-118-921-5820 03/25/14 DS50002260B-page 30 2014 Microchip Technology Inc.

CY920 Regulatory Compliance Information CY920 Regulatory Compliance Information Revision 0.2 May 2015 Revision 0.0 (10/2014) Preliminary CY920 Regulatory Compliance Information This document covers the Regulatory Compliance information which will be part of the datasheet and related documents shared with customers. 1 Preliminary Revision 0.0 (10/2014) CY920 Regulatory Compliance Information 1.1 Antenna Considerations:

Table 1-1 provides the list of antennas along with the manufacturer and part number details. TABLE 1-1:

ANTENNA LIST Sl No Manufacturer Part Number 1 2 3 4 5 6 7 8 9 WALSIN PI_RFDPA870920IMLB301_V01 WALSIN PI_RFDPA870920IMLB301_V01 WALSIN PI_RFDPA870930IMLB301_V01 WALSIN PI_RFDPA870930IMLB301_V01 WALSIN RFDPA870930IMAB301 WALSIN WALSIN WALSIN RFDPA870945IMAB301 RFDPA870900SBAB801* +

RFCBA100630SA6B301 RFDPA870900SBAB801* +

RFCBA100645SA6B301 WALSIN RFDPA870933IMLB301 10 WALSIN RFDPA870933IMLB301 Antenna Type Dipole Antenna Dipole Antenna Dipole Antenna Dipole Antenna Dipole Antenna Dipole Antenna Dipole Antenna Dipole Antenna Dipole Antenna Dipole Antenna Peak Gain(2) 1.84 dBi/ 2.4 GHz 3.26 dBi/LB, 2.13dBi/ MB-Ext, 1.55 dBi/ UB 5GHz 1.10 dBi/ 2.4 GHz 1.88 dBi/LB, 2.41 dBi/ MB-Ext, 2.77 dBi/ UB 5GHz 1.2 dBi/ 2.4 GHz 1.16 dBi/ 2.4 GHz 0.7 dBi/ 2.4GHz 0.1 dBi/2.4GHz 1.32 dBi/ 2.4 GHz 1.53 dBi/LB, 1.92dBi/ MB-Ext, 2.64 dBi/ UB 5GHz Note 1: * The antenna connector is reverse SMA type. Note 2: LB = Lower Band; MB-Ext = Middle Band Extended; UB =

Upper band [5GHz bands]

Table 1-2 provides the antennas to be used for the various SKUs as per Table 1-1. TABLE 1-2: ANTENNAS FOR VARIOUS SKUs Configuration Code Antenna List (Sl No.) CY920-A CY920-B CY920-C 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Note 1: The antenna list for CY920-B SKU will be provided in the future revisions of this document. 2 Preliminary Revision 0.0 (10/2014) CY920 Regulatory Compliance Information 1.2 CY920 Usage Guidelines under Modular Approval The CY920 module has received Limited Module Approval (LMA) from FCC and IC as the module does not have complete built-in power regulator circuit. For leveraging the modular approval, Microchip recommends that customers must follow the supply voltage requirements provided in the datsheet and follow the power supply design guidelines described in Appendix B of the datasheet Appendix B: Power Supply Requirement for Leveraging Modular Approval. The product manufacturer must ensure that the power supply recommendations are followed, and the RF behavior adheres the FCC or TCB certification requirements when the module is installed in the final Host product. The product manufacturer should work with their test house for confirming the RF behavior with FCC or TCB. 3 Preliminary Revision 0.0 (10/2014) CY920 Regulatory Compliance Information APPENDIX A: CERTIFICATION NOTICES Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Caution:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Labeling Requirements This device complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions: the device may not cause harmful interference, and the device must accept any interference received, including interferences that may cause undesired operations. RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Information for the OEMs or Integrators The following statement must be included in all versions of this document supplied to OEMs or integrators, but should not be distributed to the end user. This device is intended for OEM or integrators only. Please see the full Grant of Equipment document for other restrictions. This device must be operated and used with a locally approved Access . Information to be Supplied to the End User by the OEM or Integrator The following regulatory and safety notices must be published in all documentation supplied to the end user of the product or system, incorporating an adapter in compliance with local regulations. The host system must be labelled with: Contains FCC ID:ZQO-CY920X and IC: 2581A-CY920X, FCC ID displayed on the label. The letter shown in Ordering Guide Part Number column should be substituted for X. For example, for the CY920-C module, the label text should be

"Contains FCC ID:ZQO-CY920C"and "IC:

2581A-CY920C. The label text should be updated according to the table shown in the Ordering Guide section of the datasheet. 1 Preliminary Revision 0.0 (10/2014) CY920 Regulatory Compliance Information Japan This device operation in the 5.15 GHz to 5.35 GHz frequency range is restricted to indoor use. Final product shall be labelled "For Indoor use only."

Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: the device may not cause interference, and the device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter "IC: 2581A-CY920X has been approved by Industry Canada to operate with the antenna types listed in Table with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. RF Exposure Information The radiated output power of the wireless device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner that the potential for human contact during normal operation is minimized. This device has been evaluated and shown compliant with the IC radio frequency exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). This device has been certified for use in Canada. Status of the listing in the Industry Canada's Radio Equipment List (REL) can be found at the following locations:

http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?la ng=eng Additional Canadian information on RF exposure can be found at the following location:

http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.ht ml Caution:

Applicable to LE-LAN device only: This device is restricted to indoor use when operating in the 5.15 GHz to 5.25 GHz frequency band. Industry Canada requires this product to be used indoors for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. Canada, avis d'Industry Canada (IC) Cet appareil numrique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d'interfrence et (2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. Cet metteur radio "IC: 2581A-CY920X a t approuv par Industrie Canada pour fonctionner avec les types d'antennes numrs dans le tableau 7-2 avec le gain maximal admissible et impdance d'antenne requise pour chaque type d'antenne indiqu. Types d'antennes n'est pas inclus dans cette liste, ayant un gain suprieur au gain maximal indiqu pour ce type, sont strictement interdits pour une utilisation avec cet appareil. Informations concernant l'exposition aux frquences radio (RF) La puissance de sortie mise par l'appareil de sans fil Dell est infrieure la limite d'exposition aux frquences radio d'Industry Canada (IC). Utilisez l'appareil de sans fil Dell de faon minimiser les contacts humains lors du fonctionnement normal. Ce priphrique a galement t valu et dmontr conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition des appareils mobiles (les antennes se situent moins de 20 cm du corps d'une personne). Ce priphrique est homologu pour l'utilisation au Canada. Pour consulter l'entre correspondant l'appareil dans la liste d'quipement radio (REL - Radio Equipment List) d'Industry Canada rendez-vous sur:

http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?la ng=eng Pour des informations supplmentaires concernant l'exposition aux RF au Canada rendez-vous sur:

http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.ht ml Caution:

Prudence (ce n'est applicable qu'aux dispositif LE-LAN):

Ce dispositif est limit une utilisation en intrieur cause de son fonctionnement dans la gamme 5.15 GHz 5.25 GHz. Industrie Canada exige que ce produit est utilis l'intrieur pour la gamme de frquence de 5,15 5,25 GHz pour rduire les risques d'interfrence nuisible la co-canal systmes mobiles par satellite. 2 Preliminary Revision 0.0 (10/2014) CY920 Regulatory Compliance Information Taiwan NCC Statement:

The low-power radio-frequency devices must not be altered by changing the frequency, enhancing emission power, adding external antenna, and modification of original design characteristic as well as function. The operation of the low-power radio-frequency devices is subject to the conditions that no harmful interference is caused. The user must stop operating the device immediately should harmful interference is caused and shall not resume until the condition causing the harmful interference has been corrected. Moreover, the interference must be accepted that may be caused by the operation of an authorised communications, or ISM equipment. End Product Labeling:

This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following:

"Contains CCXXxxYYyyyZzW Device operation, if available in 5.25 5.35GHz frequency range, is restricted to indoor use only, Outdoor operations in the 5250~5350MHz is prohibited. 3 Preliminary Revision 0.0 (10/2014)

Report No.: 1540389R-RFUSP30V00

(9) EUT Photo (M/N: CY920-C)(Main Source)

(10) EUT Photo (M/N: CY920-C)(Main Source) (DDR / ESMT ; FLASH / MXIC) FLASH DDR Page : 5 of 42 Report No.: 1540389R-RFUSP30V00

(11) EUT Photo (M/N: CY920-C)(Main Source) Antenna Connector / IPEX

(12) EUT Photo (M/N: CY920-C)(Main Source) Page : 6 of 42 Report No.: 1540389R-RFUSP30V00

(13) EUT Photo (M/N: CY920-C)(Main Source)

(14) EUT Photo (M/N: CY920-C)(Main Source) Page : 7 of 42 Report No.: 1540389R-RFUSP30V00

(15) EUT Photo (M/N: CY920-C)(Main Source)

(16) EUT Photo (M/N: CY920-C) (2nd Source) Page : 8 of 42 Report No.: 1540389R-RFUSP30V00

(17) EUT Photo (M/N: CY920-C) (2nd Source) (DDR / EtronTech ; FLASH / Winbond) FLASH DDR

(18) EUT Photo (M/N: CY920-C) (2nd Source) Antenna Connector/ ELECTRIC CONNECTOR Page : 9 of 42 Report No.: 1540389R-RFUSP30V00

(19) EUT Photo (M/N: CY920-C) (2nd Source)

(20) EUT Photo (M/N: CY920-C) (2nd Source) Page : 10 of 42 Report No.: 1540389R-RFUSP30V00

(21) EUT Photo (M/N: CY920-A)(Main Source)

(22) EUT Photo (M/N: CY920-A)(Main Source) (DDR / ESMT ; FLASH / MXIC) FLASH DDR Page : 11 of 42 Report No.: 1540389R-RFUSP30V00

(23) EUT Photo (M/N: CY920-A)(Main Source) Antenna Connector / IPEX

(24) EUT Photo (M/N: CY920-A)(Main Source) Page : 12 of 42 Report No.: 1540389R-RFUSP30V00

(25) EUT Photo (M/N: CY920-A)(Main Source)

(26) EUT Photo (M/N: CY920-A) (2nd Source) Page : 13 of 42 Report No.: 1540389R-RFUSP30V00

(27) EUT Photo (M/N: CY920-A) (2nd Source)(DDR / EtronTech ; FLASH / Winbond) FLASH DDR

(28) EUT Photo (M/N: CY920-A) (2nd Source) Antenna Connector/ ELECTRIC CONNECTOR Page : 14 of 42 Report No.: 1540389R-RFUSP30V00

(29) EUT Photo (M/N: CY920-A) (2nd Source)

(30) EUT Photo (M/N: CY920-A) (2nd Source) Page : 15 of 42 Report No.: 1540389R-RFUSP30V00

(31) EUT Photo (M/N: CY920-A) (2nd Source)

(32) EUT Photo (M/N: CY920-A) (2nd Source) Page : 16 of 42 Report No.: 1540389R-RFUSP30V00

(33) EUT Photo -WALSIN / PI_RFDPA870920IMLB301_V01 Without Core

(34) EUT Photo - WALSIN / RFDPA870920IMLB304 (ferrite core8.0*4mm) Page : 17 of 42 Report No.: 1540389R-RFUSP30V00

(35) EUT Photo - WALSIN / RFDPA870920IMLB305 (ferrite core4.0*10)

(36) EUT Photo - WALSIN / PI_RFDPA870930IMLB301_V01 Without Core Page : 18 of 42 Report No.: 1540389R-RFUSP30V00

(37) EUT Photo - WALSIN / RFDPA870930IMLB303 (ferrite core8.0*4mm)

(38) EUT Photo - WALSIN / RFDPA870930IMLB304 (ferrite core4.0*10) Page : 19 of 42 Report No.: 1540389R-RFUSP30V00

(39) EUT Photo - WALSIN / RFDPA870933IMLB301 Without Core

(40) EUT Photo - WALSIN / RFDPA870933IMLB302 (ferrite core8.0*4mm) Page : 20 of 42 Report No.: 1540389R-RFUSP30V00

(41) EUT Photo - WALSIN / RFDPA870933IMLB303 (ferrite core4.0*10)

(42) EUT Photo - WALSIN / RFDPA870930IMAB301 Page : 21 of 42 Report No.: 1540389R-RFUSP30V00

(43) EUT Photo - WALSIN / RFDPA870945IMAB301

(44) EUT Photo - WALSIN / RFDPA870900SBAB801 + RFCBA100630SA6B301 Page : 22 of 42 Report No.: 1540389R-RFUSP30V00

(45) EUT Photo - WALSIN / RFDPA870900SBAB801 + RFCBA100645SA6B301

(46) EUT Photo - WALSIN / RFDPA870920IMLB305 Page : 23 of 42 Report No.: 1540389R-RFUSP30V00

(47) EUT Photo - WALSIN / RFDPA870920IMLB305

(48) EUT Photo - WALSIN / RFCBA100620SF6B301 Page : 24 of 42 Report No.: 1540389R-RFUSP30V00

(49) EUT Photo - WALSIN / RFCBA100620SF6B301

(50) EUT Photo - WALSIN / RFDPA870900SMLB801 Page : 25 of 42 Report No.: 1540389R-RFUSP30V00

(51) EUT Photo - WALSIN / RFCBA100620SF6B305

(52) EUT Photo - WALSIN / RFCBA100620SF6B305 Page : 26 of 42 Report No.: 1540389R-RFUSP30V00

(53) EUT Photo - WALSIN / RFDPA870900SMLB801

(54) EUT Photo - WALSIN / RFCBA100633SF6B301 Page : 27 of 42 Report No.: 1540389R-RFUSP30V00

(55) EUT Photo - WALSIN / RFCBA100633SF6B301

(56) EUT Photo - WALSIN / RFDPA870900SMLB801 Page : 28 of 42 Report No.: 1540389R-RFUSP30V00

(57) EUT Photo - WALSIN / RFCBA100633SF6B302

(58) EUT Photo - WALSIN / RFCBA100633SF6B302 Page : 29 of 42 Report No.: 1540389R-RFUSP30V00

(59) EUT Photo - WALSIN / RFDPA870900SMLB801

(60) EUT Photo - WALSIN / RFCBA100625SF6B301 Page : 30 of 42 Report No.: 1540389R-RFUSP30V00

(61) EUT Photo - WALSIN / RFCBA100625SF6B301

(62) EUT Photo - WALSIN / RFDPA870900SMLB801 Page : 31 of 42 Report No.: 1540389R-RFUSP30V00

(63) EUT Photo - WALSIN / RFCBA100625SF6B302

(64) EUT Photo - WALSIN / RFCBA100625SF6B302 Page : 32 of 42 Report No.: 1540389R-RFUSP30V00

(65) EUT Photo - WALSIN / RFDPA870900SMLB801

(66) EUT Photo - WALSIN / RFCBA100625SF6B301 Page : 33 of 42 Report No.: 1540389R-RFUSP30V00

(67) EUT Photo - WALSIN / RFCBA100625SF6B301

(68) EUT Photo - WALSIN / RFDPA870900SMLB803 Page : 34 of 42 Report No.: 1540389R-RFUSP30V00

(69) EUT Photo - WALSIN / RFCBA100625SF6B302

(70) EUT Photo - WALSIN / RFCBA100625SF6B302 Page : 35 of 42 Report No.: 1540389R-RFUSP30V00

(71) EUT Photo - WALSIN / RFDPA870900SMLB803

(72) EUT Photo - WALSIN / RFDPA870920IMLB307 Page : 36 of 42 Report No.: 1540389R-RFUSP30V00

(73) EUT Photo - WALSIN / RFDPA870920IMLB307

(74) EUT Photo - WALSIN / RFDPA870920IMLB306 Page : 37 of 42 Report No.: 1540389R-RFUSP30V00

(75) EUT Photo - WALSIN / RFDPA870920IMLB306

(76) EUT Photo - WALSIN / RFDPA870925IMLB301 Page : 38 of 42 Report No.: 1540389R-RFUSP30V00

(77) EUT Photo - WALSIN / RFDPA870925IMLB301

(78) EUT Photo - WALSIN / RFDPA870925IMLB302 Page : 39 of 42 Report No.: 1540389R-RFUSP30V00

(79) EUT Photo - WALSIN / RFDPA870925IMLB302

(80) EUT Photo - WALSIN / RFDPA870925IMLB303 Page : 40 of 42 Report No.: 1540389R-RFUSP30V00

(81) EUT Photo - WALSIN / RFDPA870925IMLB303

(82) EUT Photo - WALSIN / RFDPA870925IMLB304 Page : 41 of 42 Report No.: 1540389R-RFUSP30V00

(83) EUT Photo - WALSIN / RFDPA870925IMLB304 Page : 42 of 42 Report No.: 1540389R-RFUSP30V00 Attachment 3 : EUT Detailed Photographs (Shield can height and absorber etc.)

(5) EUT Photo EMI Absorber location

(optional) EMI Absorber location

(optional)

(6) EUT Photo Page : 3 of 5

(7) EUT Photo

(8) EUT Photo Report No.: 1540389R-RFUSP30V00 Page : 4 of 5 Report No.: 1540389R-RFUSP30V00

(9) EUT Photo Page : 5 of 5

Report No.: 1540389R-RFUSP30V00 Attachment 2 : EUT Detailed Photographs

(1) EUT Photo (M/N: CY920-C)(Main Source)

(2) EUT Photo (M/N: CY920-C)(Main Source) (64pin connector / Xinya) 64pin Connector Page : 1 of 42 Report No.: 1540389R-RFUSP30V00

(3) EUT Photo (M/N: CY920-C) (2nd Source)

(4) EUT Photo (M/N: CY920-C) (2nd Source) (64pin connector / Xisheng) 64pin connector Page : 2 of 42 Report No.: 1540389R-RFUSP30V00

(5) EUT Photo (M/N: CY920-A)(Main Source)

(6) EUT Photo (M/N: CY920-A)(Main Source) (64pin connector / Xinya) 64pin Connector Page : 3 of 42 Report No.: 1540389R-RFUSP30V00

(7) EUT Photo (M/N: CY920-A) (2nd Source)

(8) EUT Photo (M/N: CY920-A) (2nd Source) (64pin connector / Xisheng) 64pin connector Page : 4 of 42 Report No.: 1540389R-RFUSP30V00 Attachment 3 : EUT Detailed Photographs (Shield can height and absorber etc.)

(1) EUT PhotoWithout absorber

(2) EUT PhotoWithout absorber Page : 1 of 5 Report No.: 1540389R-RFUSP30V00

(3) EUT Photo- With absorber

(4) EUT Photo- With absorber Page : 2 of 5