FCC ID: NS9NBG30 2.4GHz 802.11bg 1W OEM Module

Operating Manual n802.11bg-30 2.4GHz 802.11bg 1W OEM Module Revision 0.50, June 5, 2012 Microhard Systems Inc. Phone: (403) 248-0028 Fax: (403) 248-2762 www.microhardcorp.com Model: n802.11bg-

30 Warranty Microhard Systems Inc. warrants that each product will be free of defects in material and workmanship for a period of one (1) year for its products. The warranty commences on the date the product is shipped by Microhard Systems Inc. Microhard Systems Inc.s sole liability and responsibility under this warranty is to repair or replace any product which is returned to it by the Buyer and which Microhard Systems Inc. determines does not conform to the warranty. Product returned to Microhard Systems Inc. for warranty service will be shipped to Microhard Systems Inc. at Buyers expense and will be returned to Buyer at Microhard Systems Inc.s expense. In no event shall Microhard Systems Inc. be responsible under this warranty for any defect which is caused by negligence, misuse or mistreatment of a product or for any unit which has been altered or modified in any way. The warranty of replacement shall terminate with the warranty of the product. Warranty Disclaims Microhard Systems Inc. makes no warranties of any nature of kind, expressed or implied, with respect to the hardware, software, and/or products and hereby disclaims any and all such warranties, including but not limited to warranty of non-infringement, implied warranties of merchantability for a particular purpose, any interruption or loss of the hardware, software, and/or product, any delay in providing the hardware, software, and/or product or correcting any defect in the hardware, software, and/or product, or any other warranty. The Purchaser represents and warrants that Microhard Systems Inc. has not made any such warranties to the Purchaser or its agents MICROHARD SYSTEMS INC. EXPRESS WARRANTY TO BUYER CONSTITUTES MICROHARD SYSTEMS INC. SOLE LIABILITY AND THE BUYERS SOLE REMEDIES. EXCEPT AS THUS PROVIDED, MICROHARD SYSTEMS INC. DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PROMISE. MICROHARD SYSTEMS INC. PRODUCTS ARE NOT DESIGNED OR INTENDED TO BE USED IN ANY LIFE SUPPORT RELATED DEVICE OR SYSTEM RELATED FUNCTIONS NOR AS PART OF ANY OTHER CRITICAL SYSTEM AND ARE GRANTED NO FUNCTIONAL WARRANTY. Indemnification The Purchaser shall indemnify Microhard Systems Inc. and its respective directors, officers, employees, successors and assigns including any subsidiaries, related corporations, or affiliates, shall be released and discharged from any and all manner of action, causes of action, liability, losses, damages, suits, dues, sums of money, expenses

(including legal fees), general damages, special damages, including without limitation, claims for personal injuries, death or property damage related to the products sold hereunder, costs and demands of every and any kind and nature whatsoever at law. IN NO EVENT WILL MICROHARD SYSTEMS INC. BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL, BUSINESS INTERRUPTION, CATASTROPHIC, PUNITIVE OR OTHER DAMAGES WHICH MAY BE CLAIMED TO ARISE IN CONNECTION WITH THE HARDWARE, REGARDLESS OF THE LEGAL THEORY BEHIND SUCH CLAIMS, WHETHER IN TORT, CONTRACT OR UNDER ANY APPLICABLE STATUTORY OR REGULATORY LAWS, RULES, REGULATIONS, EXECUTIVE OR ADMINISTRATIVE ORDERS OR DECLARATIONS OR OTHERWISE, EVEN IF MICROHARD SYSTEMS INC. HAS BEEN ADVISED OR OTHERWISE HAS KNOWLEDGE OF THE POSSIBILITY OF SUCH DAMAGES AND TAKES NO ACTION TO PREVENT OR MINIMIZE SUCH DAMAGES. IN THE EVENT THAT REGARDLESS OF THE WARRANTY DISCLAIMERS AND HOLD HARMLESS PROVISIONS INCLUDED ABOVE MICROHARD SYSTEMS INC. IS SOMEHOW HELD LIABLE OR RESPONSIBLE FOR ANY DAMAGE OR INJURY, MICROHARD SYSTEMS INC.'S LIABILITY FOR ANYDAMAGES SHALL NOT EXCEED THE PROFIT REALIZED BY MICROHARD SYSTEMS INC. ON THE SALE OR PROVISION OF THE HARDWARE TO THE CUSTOMER. Proprietary Rights The Buyer hereby acknowledges that Microhard Systems Inc. has a proprietary interest and intellectual property rights in the Hardware, Software and/or Products. The Purchaser shall not (i) remove any copyright, trade secret, trademark or other evidence of Microhard Systems Inc.s ownership or proprietary interest or confidentiality other proprietary notices contained on, or in, the Hardware, Software or Products, (ii) reproduce or modify any Hardware, Software or Products or make any copies thereof, (iii) reverse assemble, reverse engineer or decompile any Software or copy thereof in whole or in part, (iv) sell, transfer or otherwise make available to others the Hardware, Software, or Products or documentation thereof or any copy thereof, except in accordance with this Agreement. ii N2420B Operating Manual n802.11bg-30 Regulatory Requirements WARNING:

To satisfy FCC RF exposure requirements for both base and mobile a separation distance of 23 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter. WARNING:

Changes or modifications not expressly approved by Microhard Systems Inc. could void the users authority to operate the equipment. This device has been tested with MMCX and Reverse Polarity SMA connectors with the antennas listed in Appendix A When integrated in OEM products, fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Antennas not listed in the tables must be tested to comply with FCC Section 15.203 (unique antenna connectors) and Section 15.247 (emissions). WARNING:

To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational. For example, if a host was previously authorized as an unintentional radiator under the Declaration of Conformity procedure without a transmitter certified module and a module is added, the host manufacturer is responsible for ensuring that the after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this may depend on the details of how the module is integrated with the host, the grantee (the party responsible for the module grant) shall provide guidance to the host manufacturer for compliance with the Part 15B requirements. WARNING:

MAXIMUM EIRP FCC Regulations allow up to 36 dBm equivalent isotropically radiated power (EIRP). Therefore, the sum of the transmitted power (in dBm), the cabling loss and the antenna gain cannot exceed 36 dBm. WARNING:

EQUIPMENT LABELING The FCC and IC numbers depend on the model of the radio module. Do NOT use the Marketing Name of the product but the Model to distinguish the Certifications Numbers. This device has been modularly approved. The manufacturer, product name, and FCC and Industry Canada identifiers of this product must appear on the outside label of the end-user equipment. SAMPLE LABEL REQUIREMENT for Model: n802.11bg-30:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Contains:

FCCID: NS9NBG30 IC : 3143A-NBG30 N2420B Operating Manual: Contents iii Contents Warranty ....................................................................................................................................................................... ii Warranty Diclaims ........................................................................................................................................................ ii Indemnification ............................................................................................................................................................. ii Proprietary Rights ......................................................................................................................................................... ii N2420B Regulatory Requirements .............................................................................................................................. iii CONTENTS .............................................................................................................................................................. IV 2. GENERAL ........................................................................................................................................................... 1 PRODUCT OVERVIEW ........................................................................................................................................................ 1 OUTPUT POWER LEVEL ..................................................................................................................................................... 2 INSTALLATION ................................................................................................................................................. 4 OVERVIEW ....................................................................................................................................................................... 4 ESTIMATING THE GAIN MARGIN ....................................................................................................................................... 4 ANTENNAS AND CABLING ................................................................................................................................................. 6 3.2.1 ........................................................................................................................ Internal Cabling

............................................................................................................................................................................... 6 3.2.2 ............................................................ Installing External Cables, Antennas and Lightning Arrestors

............................................................................................................................................................................... 7 3.0 3.1 3.2 2.0 2.1 3. iv N2420B Operating Manual 2. General 2.0 Product Overview The N2420B is a high-performance embedded wireless data transceiver. Operating in the 2400 - 2483.5 MHz ISM band, this a spread-spectrum module is capable of providing reliable wireless data transfer between almost any type of equipment. The small-size and superior RF performance of this module make it ideal for many applications. While a pair of N2420B modules can link two terminal devices (point-to-

point operation); multiple modules can be used together to create a network of various topologies, including point-to-multipoint and repeater operation. Multiple independent networks can operate concurrently, so it is possible for unrelated communications to take place in the same or a nearby area without sacrificing privacy or reliability. 1.1 Features Key features of the N2420B include:

transmission within a public, license-exempt band of the radio spectrum1 this means that it can be used without access fees

(such as those incurred by cellular airtime). a serial I/O data port with handshaking and hardware flow control, allowing the N2420B to interface directly to any equipment with an asynchronous serial interface. ease of installation and use the N2420B module uses a subset of standard AT style commands, very similar to those used by traditional telephone line modems. all units in a system are physically identical, and can be configured as a master, repeater or slave using the AT command set. No hardware modifications are required 128 sets of user-selectable pseudo-random hopping patterns, intelligently designed to offer the possibility of separately operating multiple networks while providing security, reliability and high tolerance to interference. encryption key with 65536 user-selectable values to maximize security and privacy of communications. 32-bit of CRC error detection and auto re-transmit to provide accuracy and reliability of data. 1 902-928 MHz, which is license-free within North America; may need to be factory-

configured differently for some countries. N2420B Operating Manual: Chapter2 General 1 TDMA (time division multiple access) support, allowing multi-slave access in point-to-point mode. roaming ability, allowing repeaters and slaves to re-

synchronize with a new master if the synchronization pulse from the original master is lost. While the typical application for the N2420B is to provide a short- to mid-

range wireless communications link between DTEs, it can be adapted to almost any situation where an asynchronous serial interface is used and data intercommunication is required. 2.1 Output Power Level The Output Power Level determines at what power the N2420B transmits. The N2420Bs sensitive receiver can operate with very low power levels, so it is recommended that the lowest power necessary is used; using excessive power contributes to unnecessary RF pollution. Ideally, you should test the communications performance between units starting from a low power level and working upward until the RSSI is sufficiently high and a reliable link is established. The conditions will vary widely between applications, the output power settings can be calculated based on following information. Transmitter antenna gain Cable loss Equivalent Isotropically Radiated Power (EIRP) requirement by FCC Regulations Power Setting = 36 Antenna Gain Cable Loss The power setting must be no more than the above calculation value. Any higher is a violation of FCC rules. See IMPORTANT warning below. Table 1 Output Power Power Setting

(dBm) 22 23 24 25 26 27 28 29 30 Approx. Output Power

(mW) 160 200 250 320 400 500 630 800 1000 2 N2420B Operating Manual: Chapter 2 General N2420B Operating Manual: Chapter2 General 3 3. Installation 3.0 Overview Qualified and experienced personnel must carry out the installation, removal or maintenance of all antenna components. The N2420B complies with FCC part 15 at the modular level for operation in the license-free 2400-2483.5 MHz ISM band. This chapter provides guidelines for installing and deploying equipment which incorporates the N2420B module. 3.1 Estimating the Gain Margin Successful communication between N2420B modules is dependent on three main factors:

System Gain Path Loss System gain is a calculation in dB describing the performance to be expected between a transmitter-receiver pair. The number can be calculated based on knowledge of the equipment being deployed. The following four factors make up a system gain calculation:

1. Transmitter power (user selectable) 2. Transmitter gain (transmitting antenna gain minus cabling loss between Interference the transmitting antenna and the N2420B module) 3. Receiver gain (Receiving antenna gain minus cabling loss between the receiving antenna and the module) 4. Receiver sensitivity (Specified as -108dBm on the N2420B module) In the following illustration, the transmitting antenna has a gain of 6 dB, and the receiving antenna has a gain of 3 dB. The cable loss between the module and the antenna is 2 dB on both the transmitting and receiving side. Cable Loss = 2 dB Cable Loss = 2 dB Antenna Gain = 6 dB Antenna Gain = 3 dB Transmitter 30 dBm Output Power Receiver Sensitivity =

-105 dBm 4 N2420B Operating Manual: Chapter 3 Installation Figure 1 Gain Calculation The power level has been set to 30dBm (1W) on the transmitter, and the receiver sensitivity for the N2420B is -108dBm. System gain would be calculated to be:

30 - 2 + 6 + 3 - 2 + 108 = 143 dB. Base Height (m) Mobile Height

(m) Distance (km) Figure 2 System Deploying When deploying your system, care must be taken to ensure the path loss

(reduction of signal strength from transmitter to receiver in dB) between equipment does not exceed the system gain (140 dB in the above example). It is recommended to design for a gain margin of at least 20 dB to ensure reliable communication. Gain margin is the difference between system gain and path loss. Referring to the same example, suppose the path loss is 100 dB, the gain margin would be 40 dB, which is more than adequate for reliable communication. Path loss is a very complicated calculation which mainly depends on the terrain profile, and the height of the antennas off the ground. The following table provides path loss numbers for varying antenna heights and antenna separation: These numbers are real averages taken from rural environments. They do not apply to urban, non-line-of-sight environments. Table 2 Path Loss Distance

(km) 5 5 8 8 8 16 16 16 16 16 16 Base Height

(m) 15 30 15 15 15 15 15 15 30 30 30 Mobile Height

(m) 2.5 2.5 2.5 5 10 2.5 5 10 10 5 2.5 Path Loss

(dB) 116.5 110.9 124.1 117.7 105 135.3 128.9 116.2 109.6 122.4 128.8 N2420B Operating Manual:Glossary 5 Once the equipment is deployed, you can verify the signal strength by entering into Command Mode and reading Register S123. This register provides the average signal strength in dBm. The minimum strength for communication is roughly -108dBm. For consistent reliable communication, you should try to deploy the equipment such that signal strength exceeds -95dBm. 3.2 Antennas and Cabling This section describes the recommended procedure for installing cabling and antennas for use with the N2420B module. 3.2.1 Internal Cabling The most common method for installing the module is to run a cable from the modules MCX connector to a reverse TNC bulkhead connector on the chassis of the equipment as shown in Figure 3. This cable can be purchased from Microhard Systems. Reverse TNC Connector RG316 Cable with MCX male connector and Reverse TNC bulkhead connector MCX female connector 0 3

-

G B 1 1

. 2 0 8 n Figure 3 Suggested Internal Cabling Cable losses are negligible for the short piece used within the chassis. Additional losses up to 0.5 dB may be present in the MCX and Reverse TNC connections. 6 N2420B Operating Manual: Glossary WARNING:

To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 23 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter. WARNING:

Direct human contact with the antenna is potentially unhealthy when the N2420B is generating RF energy. Always ensure that the N2420B equipment is powered down during installation. WARNING:

Never work on an antenna system when there is lightning in the area. 3.2.2 Installing External Cables, Antennas and Lightning Arrestors Never work on an antenna system when there is lightning in the area. Direct human contact with the antenna is potentially unhealthy when the N2420B is generating RF energy. Always ensure that the N2420B equipment is powered down during installation. At all times a distance of 23 cm must be maintained between the antenna and any person when the device is in operation. Surge Arrestors The most effective protection against lightning is to install two lightning

(surge) arrestors, one at the antenna, the other one at the interface with the equipment. The surge arrestor grounding system should be fully interconnected with the transmission tower and power grounding systems to form a single, fully integrated ground circuit. Typically, both ports on surge arrestors are N-female. External Filter Although the N2420B is capable of filtering out RF noise in most environments, there are circumstances that require external filtering. Paging towers and cellular base stations in close proximity to the N2420B antenna can desensitize the receiver. Microhard Systems external cavity filter eliminates this problem. The filter has two N-female ports and should be connected in line at the interface to the RF equipment. Weatherproofing Type N and RTNC connectors are not weatherproof. All connectors should be taped with rubber splicing tape (weatherproofing tape), and then coated with a sealant. Cabling The following coax cables are recommended:

Table 3 Cable Loss Cable Loss (dB/100ft) LMR 195 LMR 400 LMR 600 10.7 3.9 2.5 Factors to take into consideration when choosing a cable are:

price;

bend radius limitations (the lower performance cables generally can bend more sharply) performance requirements; and, distance between the equipment and the antenna. N2420B Operating Manual:Glossary 7 WARNING:

MAXIMUM EIRP FCC and IC Regulations allow up to 36dBm equivalent isotropically radiated power

(EIRP). Therefore, the sum of the transmitted power (in dBm), the cabling loss and the antenna gain cannot exceed 36 dBm with respect to the isotropic radiator. WARNING:

The N2420B can only be used with any antennas listed in Appendix A. WARNING:

Be careful with dBi vs dBd gains on antenna specifications. Antenna manufactures may not clearly indicate the gain on the antenna if it is dBd or dBi. Note 1dBd = 2.15dBi. When installing the cable, always begin fastening at the top near the antenna connector/surge arrestor. The cable must be supported at the top with a hose clamp or wrap lock, and at 5 ft intervals down the length of the tower. Over-tightening the fasteners will dent the cable and reduce performance. If properly grounded surge arrestors are not installed at both the top and the bottom of the cable, then the cable should be grounded to the tower at these locations using a cable grounding kit. If the tower is non-

conductive, then a separate conductor, physically separate from the cable, should be run down the tower. Antenna Before choosing an antenna, you should have some knowledge of the path loss and the topology of the equipment. If the equipment is in a fixed location and is to communicate with only one other unit also in a fixed location, then a Yagi antenna is suitable. Choose a Yagi with enough gain to ensure adequate gain margin. When deploying the Yagi, point the antenna towards the intended target, ensuring the antenna elements are perpendicular to the ground for vertical polarization. In applications where there are multiple units that you must communicate with or units, which are in motion, you may select an Omni-directional antenna with appropriate gain. See appendix A for a list of approved antennas that can be used with the N2420B radio modem. If you require another type of antenna please contact Microhard Systems Inc. The N2420B CANNOT be used with any antenna that does not appear in Appendix A. Microhard Systems Inc. can provide you with approved antennas to ensure FCC and Industry Canada compliance. FCC Regulations allow up to 36dBm effective radiated power (EIRP). Therefore, the sum of the transmitted power (in dBm), the cabling loss and the antenna gain cannot exceed 36dBm with respect to the isotropic radiator. EIRP is calculated as follows:

EIRP = Tx Power(dBm) - Cable/Connector Loss(dB) + Ant Gain(dBi) Antenna Gains must be in dBi when calculating the 36dBm EIRP limit. 1dBd = 2.15dBi Use the guidelines in the previous section for calculating cable and connector losses. If cabling and connector losses are 2 dB, then the maximum allowable gain of the antenna will be 8 dB. 8 N2420B Operating Manual: Glossary Examples:

FCC and Industry Canada Regulations allow up to 36dBm equivalent isotropically radiated power (EIRP). Therefore, the sum of the transmitted power (in dBm), the cabling loss and the antenna gain cannot exceed 36dBm with respect to the isotropic radiator. Example 1) What is the maximum power the N2420B can be set to comply with FCC and IC given the following equipment given a Rubber Ducky Ant Gain 2dBi and no cable or connectors in the system?

Max EIRP 36dBm Max TX power = EIRP Ant Gain(dBi) + Cable/Connector loss (dB) Ant Gain dBi = 2dBi Max TX power = 36dBm 2dBi + 0dB = 34dBm We can set the modem to the maximum power setting of 30dBm. Example 2) What is the maximum power the N2420B can be set to comply with FCC and IC given the following equipment given a Yagi Ant Gain 12dBd and cable and connector loss of 4.5 dB?

Max EIRP 36dBm Max TX power = EIRP Ant Gain(dBi) + Cable/Connector loss (dB) Ant Gain dBi = Ant Gain dBd + 2.15 dB Yagi Gain (dBi) = 12 + 2.15 = 14.15dBi Max TX power = 36dBm 14.15dB + 4.5dB = 26.35dBm We must round down Hence Max TX power = 26dBm Example 3) What is the maximum power the N2420B can be set to comply with FCC and IC given the following equipment given a Omni Ant Gain 6dBd and cable and connector loss of 2.5 dB?

Max EIRP 36dBm Max TX power = EIRP Ant Gain(dBi) + Cable/Connector loss (dB) Ant Gain dBi = Ant Gain dBd + 2.15 dB Omni Gain (dBi) = 6 + 2.15 = 8.15dBi Max TX power = 36dBm 8.15dB + 2.5dB = 30.35dBm Hence Max TX power = 30dBm N2420B Operating Manual:Glossary 9 A. Approved Antennas Group Rubber Ducky Patch Antennas Yagi Antennas Omni Directional Part Number MHS031100 MHS031110 MHS031120 MHS034200 MHS034210 MHS034100 MHS034110 MHS034120 MHS034150 MHS031260 MHS034000 MHS031340 MHS034020 MHS034030 MHS034040 Description 2dBi, 2.4GHz Rubber Ducky Antenna RPTNC Swivel 2dBi, 2.4GHz Rubber Ducky Antenna Reverse SMA Swivel 2dBi, 2.4GHz Rubber Ducky Antenna Reverse SMA Straight 8 dBi, 2.4GHz Mini Flat Patch Directional Antenna RPTNC Pigtail 14 dBi, 2.4GHz Flat Patch Directional Antenna RPTNC Pigtail 9 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail 12 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail 14 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail 14.5 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail 5 dBi, Omni Directional Antenna RPTNC Pigtail 6 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail 8 dBi, Omni Directional Antenna RPTNC Pigtail 10.5 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail 12 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail 15 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail WARNING:

Changes or modifications not expressly approved by Microhard Systems Inc. could void the users authority to operate the equipment. This device has been tested with MMCX and Reverse Polarity SMA connectors with the antennas listed in Appendix A When integrated in OEM products, fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Antennas not listed in the tables must be tested to comply with FCC Section 15.203 (unique antenna connectors) and Section 15.247 (emissions). Please Contact Microhard Systems Inc. if you need more information. Industry Canada: This device has been designed to operate with the antennas listed below, and having a maximum gain of 15 dBi. Antennas not included in this list or having a gain greater than 15 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. 10 N2420B Operating Manual: Glossary

LABEL FORMAT AND LOCATION n802.11bg-30 IC: 3143A-NBG30 FCC ID: NS9NBG30 Power: 1W 2400 to 2483.5 MHz OEM Module TOP View

Tel: (403) 248-0028 Fax: (403) 248-2762 E-mail: info@microhardcorp.com www.microhardcorp.com Leaders in Wireless Telecom May 12, 2012 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Re:

Applicant: Microhard Systems Inc. Product:

Model:

FCC ID:

2.4GHz 802.11bg 1W OEM Module n802.11bg-30 NS9NBG30 Authority to Act as an Agent to FCC Dear Sir/Madam, I hereby appoint UltraTech Engineering Labs Inc. (UltraTech) to act as my agent in preparation of this application to F.C.C. for authourization of equipment under F.C.C. Rules. This authorization is valid for 180days from the date of this letter. The applicant hereby certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a party for these purposes. Sincerely, Hany Shenouda Director of Engineering Microhard Systems Inc.

Tel: (403) 248-0028 Fax: (403) 248-2762 E-mail: info@microhardcorp.com www.microhardcorp.com Leaders in Wireless Telecom May 12, 2012 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Subject: Request for withholding from public disclosure the schematic diagrams and system block diagrams, parts lists and operational description pursuant to an application for certification. Applicant:

Product:

Model:

FCC ID:

Microhard Systems Inc. 2.4GHz 802.11bg 1W OEM Module n802.11bg-30 NS9NBG30 Dear Sir/Madam, We, Microhard Systems Inc., would like to request that the schematic diagrams, system block diagrams, parts list, and operational description, submitted with the application for certification be withheld from public disclosure as per Section 0.459 of FCC Rules. This request is made under the provisions of Section 0.457(d) of the Commission's Rules, and Section 552(b)(4) of the Freedom of Information Act. These sections authorize as a withholding from public inspection materials which would be privileged as a matter of law if retained by the person submitting them, and materials which would not customarily be released to the public by that person. If you have any queries, please do not hesitate to contact us:

Tel: (403) 248-0028 Fax: (403) 248-2762 Yours truly, Hany Shenouda Director of Engineering Microhard Systems Inc.

June 4, 2012 Ultratech Engineering Labs, Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 Subject:

FCC Certification Authorization Application Under FCC Part 15, Subpart C, Section 15.247 - Digital Modulation Systems (DTS). Applicant: Microhard Systems Inc. Product:

Model No.:

FCC ID:

2.4GHz 802.11bg 1W OEM Module n802.11bg-30 NS9NBG30 Dear Sir/Madam:

As appointed agent for Microhard Systems Inc., we submit the application for certification of the above product. Kindly review all files uploaded to your electronic filing site. NOTE: This application is subject to modular approval; see Applicants cover letter requesting for modular approval. If you have any queries, please do not hesitate to contact us. Yours truly, Dan Huynh Dan Huynh Authorized Agent UltraTech Group of Labs FCC TCB & IC CB Ultratechs Accreditations:

0685 FCC 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R Korea KCC-RRL CA2049 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: vic@ultratech-labs.com

Tel: (403) 248-0028 Fax: (403) 248-2762 E-mail: info@microhardcorp.com www.microhardcorp.com Leaders in Wireless Telecom May 12, 2012 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Re:

Applicant: Microhard Systems Inc. Product:

Model:

FCC ID:

2.4GHz 802.11bg 1W OEM Module n802.11bg-30 NS9NBG30 Class B Verification Dear Sir/Madam, We, the undersigned, hereby attest to the fact that we will apply the Verification Authorization procedure to the Class B Unintentional Radiator portion. Best Regards, Sincerely, Hany Shenouda Director of Engineering Microhard Systems Inc.

Tel: (403) 248-0028 Fax: (403) 248-2762 E-mail: info@microhardcorp.com www.microhardcorp.com Leaders in Wireless Telecom May 12, 2012 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Subject: Request for Modular Approval Applicant:

Microhard Systems Inc. Product:

Model:

FCC ID:

2.4GHz 802.11bg 1W OEM Module n802.11bg-30 NS9NBG30 Dear Sir/Madam, We, Microhard Systems Inc., request modular approval included below is a clarification on the modular compliance. Hany Shenouda Director of Engineering Microhard Systems Inc. Tel: (403) 248-0028 Fax: (403) 248-2762 E-mail: info@microhardcorp.com www.microhardcorp.com Leaders in Wireless Telecom

(a)

(b)

(c)

(d)

(e) 1. Requirements for Modular Transmitters In order to be considered a transmitter module, the device must be complete RF transmitter, i.e., it must have its own reference oscillator (e.g., VCO), antenna, etc. The only connectors to the module, if any, may be power supply and modulation/data inputs Compliance with FCC RF Exposure requirements may, in some instances, limit the output power of a module and/or the final applications in which the approved module may be employed While the applicant for a device into which an authorized module is installed is not required to obtain a new authorization for the module, this does not preclude the possibility that some other form of authorization or testing may be required for the device

(e.g., a WLAN into which the authorized module is installed still be authorized as PC peripheral, subject to the appropriate equipment authorization) In the case of a modular transceiver, the modular approval policy only applies to the transmitter portion of such devices. Pursuant to section 15.101(b), the receiver portion will either be subject to Verification, or it will not be subject to any authorization requirements (unless if is a Scanning Receiver, in which case it is also subject to Certification, pursuant to Section 15.101(a) The holder of the grant of equipment authorization (Grantee) of the module is responsible for the compliance of the module in its final configuration, provided that the OEM, integrator, and /or end user has complied with all of the instructions provided by the Grantee which indicate installation and/or operating conditions necessary for compliance. Requirements for Modular Transmitters The modulator transmitter must have its own RF shielding. This is intended to ensure that the module does not have to reply upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with Part 15 limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in noncompliant operation. Manufacturers Clarification The transmitter is completed with its own reference oscillator, antenna. Only connectors provide are dc supply, data and rf ports are provided with the modular transmitter The radio is intended for use in mobile and fixed applications. A minimum of 23cm separation distance is required from any user to meet FCC RF Exposure requirement Instructions are provided in the user manual for the integrators to comply with FCC Part15, Subpart B, and any other applicable FCC requirements. The receiver is verified. End-users must comply with the following instruction sated in the users manual:

- Labeling requirement for equipment using this modular transmitter.

- RF Exposure compliance with FCC Rules 2.1091 and 1.1307 when the radio is used in a mobile or base system

- Other Instructions provided by the manufacturer for third party integrators as stated in the User manual. Manufacturers Clarification The modular transmitter has its own RF shielding Tel: (403) 248-0028 Fax: (403) 248-2762 E-mail: info@microhardcorp.com www.microhardcorp.com Leaders in Wireless Telecom 2. 3. 4. 5. 6. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over modulation. The modular transmitter must have its own power supply regulation. This is intended to ensure that the module will comply with Part 15 requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). Any antenna used with the module must be approved with the module, either at the time of initial authorization or through a Class II permissive change. The professional installation provision of Section 15.203 may not be applied to modules but can apply to limited modular approvals under paragraph (b) of this section. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (See Section 15.31(I)). The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number.

(A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID:

XYZMODEL1 or Contains FCC ID: XYZMODEL1. Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of The modular transmitter has buffered modulation/data inputs The modular transmitter has its own analog and digital power supply regulation. The radio and its associated antennas are provided with a unique coupling antenna connector MMCX. The modular transmitter was tested in a stand-alone configuration The module transmitter is equipped with a permanently affixed label displaying its FCC identification number. A sample exterior label is shown on Page iii of the user manual submitted with filing. Tel: (403) 248-0028 Fax: (403) 248-2762 E-mail: info@microhardcorp.com www.microhardcorp.com Leaders in Wireless Telecom which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. 7. 8. Please refer to the user manual for instructions provided by the manufacturer for third party integrators. A minimum separation distance of 23 cm is required for both mobile and fixed installation of this module in order to satisfy the FCC RF Exposure requirement as stated on Page iii of the user manual.

FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.7. The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation. RF EXPOSURE REQUIRMENTS [ 15.247(i), 1.1310 & 2.1091]

Page 155 FCC ID: NS912NBG30 FCC 47 CFR 1.1310:

5.7.1. Method of Measurements Refer to Sections 1.1310, 2.1091 In order to demonstrate compliance with MPE requirements (see Section 2.1091), the following information is typically needed:

(1) Calculation that estimates the minimum separation distance (20 cm or more) between an antenna and persons required to satisfy power density limits defined for free space.

(2) Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement

(3) Any caution statements and/or warning labels that are necessary in order to comply with the exposure limits

(4) Any other RF exposure related issues that may affect MPE compliance ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 Page 156 FCC ID: NS912NBG30 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Calculation Method of RF Safety Distance:

S GP r 2 4 EIRP r 4 2 P: power input to the antenna in mW EIRP: Equivalent (effective) isotropic radiated power S: power density mW/cm2 G: numeric gain of antenna relative to isotropic radiator r: distance to centre of radiation in cm Where:

5.7.2. RF Evaluation Evaluation of RF Exposure Compliance Requirements RF Exposure Requirements Compliance with FCC Rules Minimum calculated separation distance between antenna and persons required: *18 cm Manufacturer instruction for separation distance between antenna and persons required: 23 cm. Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement Antenna installation and device operating instructions shall be provided to installers to maintain and ensure compliance with RF exposure requirements. Caution statements and/or warning labels that are necessary in order to comply with the exposure limits Any other RF exposure related issues that may affect MPE compliance Refer to Users Manual for RF Exposure Information. None.

*The minimum separation distance between the antenna and bodies of users are calculated using the following formula:

RF EXPOSURE DISTANCE LIMITS r GP S 4 EIRP S 4 S = 1.0 mW/cm2 EIRP = 36.0 dBm = 1036/10 mW = 3981 mW (Worst Case)

(Minimum Safe Distance, r) =

EIRP S 4 3981

)0.1(

4 18 cm ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012

2.4GHz 802.11bg 1W OEM Module Model: n802.11bg-30 FCC ID: NS9NBG30 Applicant:

Microhard Systems Inc. 150 Country Hills Landing NW Calgary, Alberta Canada T3K 5P3 In Accordance With Federal Communications Commission (FCC) Part 15, Subpart C, Section 15.247 Digital Modulation Systems (DTS) UltraTech's File No.: MCRS-046F15C247 This Test report is Issued under the Authority of Tri M. Luu Vice President of Engineering UltraTech Group of Labs Date: June 4, 2012 Report Prepared by: Dan Huynh Issued Date: June 4, 2012 The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. Tested by: Mr. Hung Trinh Test Dates: April 25 - May 23, 2012 UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com, Email: vic@ultratech-labs.com, Email: tri@ultratech-labs.com FCC 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R Korea KCC-RRL CA2049 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Contents i FCC ID: NS9NBG30 EXHIBIT 1. TABLE OF CONTENTS EXHIBIT 2. EXHIBIT 3. EXHIBIT 4. INTRODUCTION.............................................................................................................................................. 1 1.1. SCOPE ........................................................................................................................................................................ 1 1.2. RELATED SUBMITTAL(S)/GRANT(S) ........................................................................................................................ 1 1.3. NORMATIVE REFERENCES ...................................................................................................................................... 1 PERFORMANCE ASSESSMENT.................................................................................................................... 2 2.1. CLIENT INFORMATION .............................................................................................................................................. 2 EQUIPMENT UNDER TEST (EUT) INFORMATION ................................................................................................... 2 2.2. EUTS TECHNICAL SPECIFICATIONS....................................................................................................................... 3 2.3. 2.4. ASSOCIATED ANTENNA DESCRIPTIONS................................................................................................................ 4 LIST OF EUTS PORTS............................................................................................................................................... 4 2.5. ANCILLARY EQUIPMENT........................................................................................................................................... 4 2.6. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS............................................... 5 3.1. CLIMATE TEST CONDITIONS.................................................................................................................................... 5 3.2. OPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TESTS..................................................................... 5 SUMMARY OF TEST RESULTS..................................................................................................................... 6 LOCATION OF TESTS ................................................................................................................................................ 6 4.1. 4.2. APPLICABILITY & SUMMARY OF EMC EMISSION TEST RESULTS ....................................................................... 6 4.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES................................................ 6 TEST DATA ..................................................................................................................................................... 7 5.1. POWER LINE CONDUCTED EMISSIONS [15.207(a)].............................................................................................. 7 5.2. OCCUPIED BANDWIDTH [ 15.247(a)(2)]................................................................................................................ 10 PEAK CONDUCTED OUTPUT POWER - DTS [ 15.247(b)(3)] ............................................................................... 53 5.3. TRANSMITTER BAND-EDGE & SPURIOUS CONDUCTED EMISSIONS [ 15.247(d)] .......................................... 56 5.4. 5.5. TRANSMITTER SPURIOUS RADIATED EMISSIONS AT 3 METERS [ 15.247(d), 15.209 & 15.205] ................ 127 5.6. POWER SPECTRAL DENSITY [ 15.247(e)].......................................................................................................... 132 5.7. RF EXPOSURE REQUIRMENTS [ 15.247(i), 1.1310 & 2.1091].......................................................................... 155 TEST EQUIPMENT LIST............................................................................................................................. 157 EXHIBIT 5. EXHIBIT 6. EXHIBIT 7. MEASUREMENT UNCERTAINTY............................................................................................................... 158 7.1. LINE CONDUCTED EMISSION MEASUREMENT UNCERTAINTY ....................................................................... 158 7.2. RADIATED EMISSION MEASUREMENT UNCERTAINTY ..................................................................................... 158 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 EXHIBIT 1. INTRODUCTION Page 1 FCC ID: NS9NBG30 SCOPE 1.1. Reference:

FCC Part 15, Subpart C, Section 15.247 Title:

Code of Federal Regulations (CFR), Title 47 Telecommunication, Part 15 Purpose of Test: Equipment Certification for Digital Modulation Systems (DTS) Transmitter. Test Procedures: Both conducted and radiated emissions measurements were conducted in accordance with American National Standards Institute ANSI C63.4 - American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz.

[ x ] Commercial, industrial or business environment

[ x ] Residential environment Environmental Classification:

1.2. None. RELATED SUBMITTAL(S)/GRANT(S) NORMATIVE REFERENCES 1.3. Publication 47 CFR Parts 0-19 Year 2011 2009 2009 2008-09, Edition 6.0 2006 2006 2006 2007 2003 2004 2006 2012 Title Code of Federal Regulations (CFR), Title 47 Telecommunication American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 KHz to 40 GHz American National Standard for Testing Unlicensed Wireless Devices Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-1: Measuring Apparatus Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-2: Conducted disturbances Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under 15.247 ANSI C63.4 ANSI C63.10 CISPR 22 &

EN 55022 CISPR 16-1-1

+A1

+A2 CISPR 16-1-2

+A1

+A2 FCC KDB Publication No. 558074 D01 DTS Meas Guidance v01 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 Page 2 FCC ID: NS9NBG30 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 EXHIBIT 2. PERFORMANCE ASSESSMENT 2.1. CLIENT INFORMATION Name:

Address:

APPLICANT Microhard Systems Inc. 150 Country Hills Landing NW Calgary, Alberta Canada T3K 5P3 Contact Person: Mr. Hany Shenouda Phone #: 403 248-0028 Fax #: 403 248 2762 Email Address: shenouda@microhardcorp.com Name:

Address:

MANUFACTURER Microhard Systems Inc. 150 Country Hills Landing NW Calgary, Alberta Canada T3K 5P3 Contact Person: Mr. Hany Shenouda Phone #: 403 248-0028 Fax #: 403 248-2762 Email Address: shenouda@microhardcorp.com EQUIPMENT UNDER TEST (EUT) INFORMATION 2.2. The following information (with the exception of the Date of Receipt) has been supplied by the applicant. Brand Name:

Product Name:

Model Name or Number:

Serial Number:

Type of Equipment:

Input Power Supply Type:

Primary User Functions of EUT:

Microhard Systems Inc. 2.4GHz 802.11bg 1W OEM Module n802.11bg-30 Test Sample Digital Transmission System (DTS) External Regulated DC Sources 802.11bg OEM card ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 2.3. EUTS TECHNICAL SPECIFICATIONS Page 3 FCC ID: NS9NBG30 Equipment Type:

Intended Operating Environment:

Power Supply Requirement:

RF Output Power Rating:

Operating Frequency Range:

RF Output Impedance:

Duty Cycle:

Modulation Type:

Oscillator Frequencies:

Antenna Connector Type:

TRANSMITTER Mobile Base Station (fixed use) Commercial, industrial or business environment Residential environment 3.3VDC to 3.6VDC 802.11b: 22 dBm to 29 dBm (for DBPSK 1 Mbps and DQPSK 2 Mbps) 22 dBm to 30 dBm (for CCK 11 Mbps) 802.11g: 22 dBm to 30 dBm 2412 2462 MHz 50 Ohm 100%

802.11b and 802.11g 40 MHz MMCX ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 2.4. There are four antenna families:

ASSOCIATED ANTENNA DESCRIPTIONS 1. Rubber Ducky 2. Omni Directional 3. Patch 4. Yagi Refer to antennas list exhibit for detailed specifications. 2.5. Port Number 1 LIST OF EUTS PORTS EUTs Port Description Number of RF IN/OUT Port Identical Ports Connector Type 1 MMCX 2 DC Supply & I/O Port 1 Pin Header Page 4 FCC ID: NS9NBG30 Cable Type

(Shielded/Non-shielded) Shielded coaxial cable with unique coupling connectors No cable, direct connection ANCILLARY EQUIPMENT 2.6. The EUT was tested while connected to the following representative configuration of ancillary equipment necessary to exercise the ports during tests:

Ancillary Equipment # 1 Description:

Brand name:

Model Name or Number:

Connected to EUTs Port:

Ancillary Equipment # 2 Description:

Brand name:

Model Name or Number:

Connected to EUTs Port:

Ancillary Equipment # 3 Description:

Brand name:

Model Name or Number:

Connected to EUTs Port:

Test Jig Microhard Systems Inc. N/A I/O Port Switching AC/DC Power Adaptor GVE GM36-120200-1 Test Jig of the EUT Laptop Dell PPL Test Jig of the EUT ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 EXHIBIT 3. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS Page 5 FCC ID: NS9NBG30 CLIMATE TEST CONDITIONS 3.1. The climate conditions of the test environment are as follows:

21 to 23 oC 45 to 58%

102 kPa 3.3VDC to 3.6VDC Temperature:

Humidity:

Pressure:

Power Input Source:

3.2. Operating Modes:

Special Test Software:

Special Hardware Used:

Transmitter Test Antenna:

OPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TESTS Each of lowest, middle and highest channel frequencies transmits continuously for emissions measurements. Special software and hardware provided by the Applicant to operate the EUT at each channel frequency continuously. For example, the transmitter will be operated at each of the lowest, middle and highest frequencies individually continuously during testing. Test Jig The EUT is tested with the antenna fitted in a manner typical of normal intended use as non-integral antenna equipment as described with the test results. Transmitter Test Signals Frequency Band(s):

Frequency(ies) Tested:

RF Power Output:

(measured maximum output power at antenna terminals) Normal Test Modulation:

Modulating Signal Source:

2412 -2462 MHz 2412 MHz, 2437 MHz and 2462 MHz 29.96 dBm, 0.991 W (conducted) 802.11b and 802.11g Internal ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 EXHIBIT 4. SUMMARY OF TEST RESULTS Page 6 FCC ID: NS9NBG30 LOCATION OF TESTS 4.1. All of the measurements described in this report were performed at Ultratech Group of Labs located in the city of Oakville, Province of Ontario, Canada. AC Power Line Conducted Emissions were performed in UltraTech's shielded room, 24'(L) by 16'(W) by 8'(H). Radiated Emissions were performed at the Ultratech's 3-10 TDK Semi-Anechoic Chamber situated in the Town of Oakville, province of Ontario. This test site been calibrated in accordance with ANSI C63.4, and found to be in compliance with the requirements of Sec. 2.948 of the FCC Rules. The descriptions and site measurement data of the Oakville 3-10 TDK Semi-Anechoic Chamber has been filed with FCC office (FCC File No.: 91038) and Industry Canada office (Industry Canada File No.: 2049A-3). Expiry Date: 2014-04-04. 4.2. APPLICABILITY & SUMMARY OF EMC EMISSION TEST RESULTS FCC Section(s) Test Requirements 15.203 15.207(a) 15.247(a)(2) 15.247(b)(3) 15.247(d) 15.247(d), 15.209 & 15.205 15.247(e) 15.247(i), 1.1307, 1.1310, 2.1091 Antenna requirements AC Power Line Conducted Emissions 6 dB Bandwidth Peak Conducted Output Power - DTS Band-Edge and RF Conducted Spurious Emissions at the Transmitter Antenna Terminal Transmitter Spurious Radiated Emissions Power Spectral Density RF Exposure 4.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES None. Compliance

(Yes/No) Yes Yes Yes Yes Yes Yes Yes Yes ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 Page 7 FCC ID: NS9NBG30 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 EXHIBIT 5. TEST DATA POWER LINE CONDUCTED EMISSIONS [15.207(a)]

5.1. 5.1.1. Limit(s) The equipment shall meet the limits of the following table:

Frequency of emission

(MHz) Conducted Limits (dBV) Quasi-peak Average 66 to 56* ............. 56 ....................... 60 ..... 56 to 46*

0.150.5 ................. 46 0.55 ...................... 5-30 .. 50

*Decreases linearly with the logarithm of the frequency 5.1.2. Method of Measurements ANSI C63.4-2009 5.1.3. Test Arrangement Laptop Test Jig Board AC Adapter 50 Ohm High Pass 20dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.1.4. Test Data Page 8 FCC ID: NS9NBG30 Plot 5.1.4.1. Power Line Conducted Emissions; Line Voltage: 120 VAC; Line Tested: Hot: Tx Mode Hot Hot FCC 15; Class B Conducted, Average FCC 15; Class B Conducted, Quasi-Peak Current Graph dBuV 80 70 60 50 40 30 20 10 0

-10

-20 5/7/2012 1:09:07 PM

(Start = 0.15, Stop = 30.00) MHz 1 10 Current List Frequency Peak QP Delta QP-QP Limit Avg Delta Avg-Avg Limit MHz 0.162 0.324 0.529 1.140 2.285 57.4 51.8 42.0 35.2 42.9 35.6 41.6 37.3 45.2 40.8

-20.2

-25.3

-17.6

-14.4

-9.6

-13.8

-25.7

-20.4

-18.7

-15.2 35.5 25.6 28.4 31.6 36.4 dBuV dBuV dB dBuV dB Trace Name Hot Hot Hot Hot Hot ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 9 FCC ID: NS9NBG30 Plot 5.1.4.2. Power Line Conducted Emissions; Line Voltage: 120 VAC; Line Tested: Neutral Neutral FCC 15; Class B Conducted, Quasi-Peak FCC 15; Class B Conducted, Average Neutral Current Graph dBuV 80 70 60 50 40 30 20 10 0

-10

-20 5/7/2012 12:50:12 PM

(Start = 0.15, Stop = 30.00) MHz 1 10 Current List Frequency Peak QP Delta QP-QP Limit Avg Delta Avg-Avg Limit MHz 0.247 0.287 1.318 2.987 49.6 43.1 44.2 38.7 44.6 41.0 44.1 40.5

-20.0

-23.3

-15.0

-15.5

-23.7

-24.7

-9.6

-10.1 dBuV dBuV dB 29.5 27.3 36.4 35.9 dBuV dB Trace Name Neutral Neutral Neutral Neutral ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.2. 5.2.1. Limit(s) Systems using digital modulation techniques may operate in the 902928 MHz, 24002483.5 MHz, and 5725 5850 MHz bands. The minimum 6 dB bandwidth shall be at least 500 kHz. OCCUPIED BANDWIDTH [ 15.247(a)(2)]

Page 10 FCC ID: NS9NBG30 5.2.2. Method of Measurements KDB Publication No. 558074 D01 Section 5.1.1 EBW Measurement Procedure. 5.2.3. Test Arrangement 5.2.4. Test Data Modulation Data Rate

(Mbps) 6 dB Bandwidth (MHz) Ch 01 2412 MHz Ch 06 2437 MHz Ch 11 2462 MHz 99% Occupied Bandwidth (MHz) Ch 11 Ch 01 Ch 06 2412 MHz 2437 MHz 2462 MHz DBPSK DQPSK CCK BPSK QPSK 16-QAM 64-QAM 1 2 11 9 18 36 54 802.11b 12.32 12.63 12.78 12.12 12.42 12.53 12.12 12.53 12.53 16.62 16.48 16.90 16.62 16.69 16.62 16.69 16.62 15.92 15.85 15.57 18.44 18.04 17.80 18.04 15.57 15.57 15.29 18.28 17.64 17.56 17.72 15.57 15.57 15.29 18.12 17.72 17.72 17.64 802.11g 16.76 16.55 16.62 16.69 See the following plots for detailed measurements. ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.1. 6 dB Bandwidth, 2412 MHz, 802.11b, DBPSK 1 Mbps Page 11 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.2. 6 dB Bandwidth, 2437 MHz, 802.11b, DBPSK 1 Mbps Page 12 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.3. 6 dB Bandwidth, 2462 MHz, 802.11b, DBPSK 1 Mbps Page 13 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 14 FCC ID: NS9NBG30 Plot 5.2.4.4. 6 dB Bandwidth, 2412 MHz, 802.11b, DQPSK 2 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 15 FCC ID: NS9NBG30 Plot 5.2.4.5. 6 dB Bandwidth, 2437 MHz, 802.11b, DQPSK 2 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.6. 6 dB Bandwidth, 2462 MHz, 802.11b, DQPSK 2 Mbps Page 16 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 17 FCC ID: NS9NBG30 Plot 5.2.4.7. 6 dB Bandwidth, 2412 MHz, 802.11b, CCK 11 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 18 FCC ID: NS9NBG30 Plot 5.2.4.8. 6 dB Bandwidth, 2437 MHz, 802.11b, CCK 11 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.9. 6 dB Bandwidth, 2462 MHz, 802.11b, CCK 11 Mbps Page 19 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.10. 6 dB Bandwidth, 2412 MHz, 802.11g, BPSK 9 Mbps Page 20 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 21 FCC ID: NS9NBG30 Plot 5.2.4.11. 6 dB Bandwidth, 2437 MHz, 802.11g, BPSK 9 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.12. 6 dB Bandwidth, 2462 MHz, 802.11g, BPSK 9 Mbps Page 22 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 23 FCC ID: NS9NBG30 Plot 5.2.4.13. 6 dB Bandwidth, 2412 MHz, 802.11g, QPSK 18 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 24 FCC ID: NS9NBG30 Plot 5.2.4.14. 6 dB Bandwidth, 2437 MHz, 802.11g, QPSK 18 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.15. 6 dB Bandwidth, 2462 MHz, 802.11g, QPSK, 18 Mbps Page 25 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 26 FCC ID: NS9NBG30 Plot 5.2.4.16. 6 dB Bandwidth, 2412 MHz, 802.11g, 16-QAM, 36 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 27 FCC ID: NS9NBG30 Plot 5.2.4.17. 6 dB Bandwidth, 2437 MHz, 802.11g, 16-QAM, 36 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.18. 6 dB Bandwidth, 2462 MHz, 802.11g, 16-QAM, 36 Mbps Page 28 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.19. 6 dB Bandwidth, 2412 MHz, 802.11g, 64-QAM, 54 Mbps Page 29 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 30 FCC ID: NS9NBG30 Plot 5.2.4.20. 6 dB Bandwidth, 2437 MHz, 802.11g, 64-QAM, 54 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.21. 6 dB Bandwidth, 2462 MHz, 802.11g, 64-QAM, 54 Mbps Page 31 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.22. 99% Occupied Bandwidth, 2412 MHz, 802.11b, DBPSK 1 Mbps Page 32 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.23. 99% Occupied Bandwidth, 2437 MHz, 802.11b, DBPSK 1 Mbps Page 33 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.24. 99% Occupied Bandwidth, 2462 MHz, 802.11b, DBPSK 1 Mbps Page 34 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 35 FCC ID: NS9NBG30 Plot 5.2.4.25. 99% Occupied Bandwidth, 2412 MHz, 802.11b, DQPSK 2 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 36 FCC ID: NS9NBG30 Plot 5.2.4.26. 99% Occupied Bandwidth, 2437 MHz, 802.11b, DQPSK 2 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.27. 99% Occupied Bandwidth, 2462 MHz, 802.11b, DQPSK 2 Mbps Page 37 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 38 FCC ID: NS9NBG30 Plot 5.2.4.28. 99% Occupied Bandwidth, 2412 MHz, 802.11b, CCK 11 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 39 FCC ID: NS9NBG30 Plot 5.2.4.29. 99% Occupied Bandwidth, 2437 MHz, 802.11b, CCK 11 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.30. 99% Occupied Bandwidth, 2462 MHz, 802.11b, CCK 11 Mbps Page 40 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.31. 99% Occupied Bandwidth, 2412 MHz, 802.11g, BPSK 9 Mbps Page 41 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 42 FCC ID: NS9NBG30 Plot 5.2.4.32. 99% Occupied Bandwidth, 2437 MHz, 802.11g, BPSK 9 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.33. 99% Occupied Bandwidth, 2462 MHz, 802.11g, BPSK 9 Mbps Page 43 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 44 FCC ID: NS9NBG30 Plot 5.2.4.34. 99% Occupied Bandwidth, 2412 MHz, 802.11g, QPSK 18 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 45 FCC ID: NS9NBG30 Plot 5.2.4.35. 99% Occupied Bandwidth, 2437 MHz, 802.11g, QPSK 18 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.36. 99% Occupied Bandwidth, 2462 MHz, 802.11g, QPSK, 18 Mbps Page 46 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 47 FCC ID: NS9NBG30 Plot 5.2.4.37. 99% Occupied Bandwidth, 2412 MHz, 802.11g, 16-QAM, 36 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 48 FCC ID: NS9NBG30 Plot 5.2.4.38. 99% Occupied Bandwidth, 2437 MHz, 802.11g, 16-QAM, 36 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.39. 99% Occupied Bandwidth, 2462 MHz, 802.11g, 16-QAM, 36 Mbps Page 49 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.40. 99% Occupied Bandwidth, 2412 MHz, 802.11g, 64-QAM, 54 Mbps Page 50 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 51 FCC ID: NS9NBG30 Plot 5.2.4.41. 99% Occupied Bandwidth, 2437 MHz, 802.11g, 64-QAM, 54 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.2.4.42. 99% Occupied Bandwidth, 2462 MHz, 802.11g, 64-QAM, 54 Mbps Page 52 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 Page 53 FCC ID: NS9NBG30 PEAK CONDUCTED OUTPUT POWER - DTS [ 15.247(b)(3)]

FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.3. 5.3.1. Limit(s) 15.247(b)(3): For systems using digital modulation in the 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz bands: 1 Watt. As an alternative to a peak power measurement, compliance with the one Watt limit can be based on a measurement of the maximum conducted output power. Maximum Conducted Output Power is defined as the total transmit power delivered to all antennas and antenna elements averaged across all symbols in the signaling alphabet when the transmitter is operating at its maximum power control level. Power must be summed across all antennas and antenna elements. The average must not include any time intervals during which the transmitter is off or is transmitting at a reduced power level. If multiple modes of operation are possible

(e.g., alternative modulation methods), the maximum conducted output power is the highest total transmit power occurring in any mode. 15.247(b)(4): The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. 5.3.2. Method of Measurements & Test Arrangement KDB Publication No. 558074 D01 Section 5.2.1.2 Measurement Procedure PK2. 5.3.3. Test Arrangement ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.3.4. Test Data Operation Mode Frequency

(MHz) Modulation /

Data Rate

(Mbps) Software/

PCDAC Power Setting 802.11b High Power 802.11g High Power 2412 2437 2462 2412 2437 2462 DBPSK / 1 DQPSK / 2 CCK / 11 DBPSK / 1 DQPSK / 2 CCK / 11 DBPSK / 1 DQPSK / 2 CCK / 11 BPSK / 9 QPSK / 18 16-QAM /36 64-QAM /54 BPSK / 9 QPSK / 18 16-QAM /36 64-QAM /54 BPSK / 9 QPSK / 18 16-QAM /36 64-QAM /54 55 54 53 55 54 53 55 54 53 54 54 57 57 54 54 57 57 54 54 57 57 Peak Conducted Power

(dBm) 27.18 27.85 29.82 28.84 28.87 29.76 26.97 26.80 29.60 29.83 29.93 29.93 29.96 29.72 29.83 29.96 29.86 29.27 28.33 29.30 29.81 Page 54 FCC ID: NS9NBG30 Peak EIRP

(dBm) See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 Peak Conducted Power Limit

(dBm) 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 EIRP Limit

(dBm) 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 Notes:

1. The EIRP shall be calculated based on the transmitter antenna gain (GdBi), cable loss (CLdB) and peak output power at antenna terminal (PdBm). Calculated EIRP = PdBm + GdBi - CLdB 2. EIRP shall not exceed 36 dBm limit (Power Setting = 36 dBm - GdBi + CLdB). See Operating Manual for instruction of power setting. ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Operation Mode Frequency

(MHz) Modulation /

Data Rate

(Mbps) Software/

PCDAC Power Setting 802.11b Low Power 802.11g Low Power 2412 2437 2462 2412 2437 2462 DBPSK / 1 DQPSK / 2 CCK / 11 DBPSK / 1 DQPSK / 2 CCK / 11 DBPSK / 1 DQPSK / 2 CCK / 11 BPSK / 9 QPSK / 18 16-QAM /36 64-QAM /54 BPSK / 9 QPSK / 18 16-QAM /36 64-QAM /54 BPSK / 9 QPSK / 18 16-QAM /36 64-QAM /54 35 39 35 35 39 35 35 39 35 38 39 37 37 38 39 37 37 38 39 37 37 Page 55 FCC ID: NS9NBG30 Peak EIRP

(dBm) See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 See Notes 1 & 2 Peak Conducted Power Limit

(dBm) 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 EIRP Limit

(dBm) 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 Peak Conducted Power

(dBm) 22.04 22.34 22.23 22.07 22.23 22.08 20.64 21.70 21.59 22.28 22.27 22.24 22.27 22.14 22.16 22.36 22.36 21.92 21.67 22.03 22.24 Notes:

1. The EIRP shall be calculated based on the transmitter antenna gain (GdBi), cable loss (CLdB) and peak output power at antenna terminal (PdBm). Calculated EIRP = PdBm + GdBi - CLdB 2. EIRP shall not exceed 36 dBm limit (Power Setting = 36 dBm - GdBi + CLdB). See Operating Manual for instruction of power setting. ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 Page 56 FCC ID: NS9NBG30 TRANSMITTER BAND-EDGE & SPURIOUS CONDUCTED EMISSIONS [ 15.247(d)]

FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.4. 5.4.1. Limit(s) 15.247 (d): In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. 5.4.2. Method of Measurements KDB Publication No. 558074 D01, Sections 5.4.2.2.4 Band-Edge Measurements, 5.4.1 Unwanted Emissions into Non-Restricted Bands, 5.4.2 Unwanted Emissions into Restricted Frequency Bands, 5.4.2.2.1.1 Peak Power Procedure, 5.4.2.2.2.2 Measurement Procedure RBAVG2 (Trace Averaging) and 5.4.2.2.3 Applicability of 15.35(b) and 15.35(c). 5.4.3. Test Arrangement Test Jig Board Laptop AC Adapter Attenuator 20 dB /10 dB DC Block High Pass Filter /

Band Reject Filter Filter by-pass Spectrum Analyzer ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.4.4. Test Data Page 57 FCC ID: NS9NBG30 5.4.4.1. Band-Edge RF Conducted Emissions Remark(s): Exploratory tests performed to determined worst-case test configurations, the following test results represent the worst-case. Plot 5.4.4.1.1. Band-Edge RF Conducted Emissions Low End of Frequency Band, 802.11b, 2412 MHz, CCK 11 Mbps ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.1.2. Band-Edge RF Conducted Emissions High End of Frequency Band, 802.11b, 2462 MHz, CCK 11 Mbps Page 58 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.1.3. Band-Edge RF Conducted Emissions Low End of Frequency Band, 802.11g, 2412 MHz, 64-QAM 54 Mbps Page 59 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.1.4. Band-Edge RF Conducted Emissions High End of Frequency Band, 802.11g, 2462 MHz, 64-QAM 54 Mbps Page 60 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.4.4.2. Conducted Spurious Emissions Non Restricted Frequency Bands Remark(s): Exploratory tests performed to determined worst case test configurations, the following test results at Page 61 FCC ID: NS9NBG30 high power setting represents the worst case. Plot 5.4.4.2.1. Conducted Spurious Emissions - Non Restricted Frequency Bands 802.11b, 2412 MHz, CCK 11 Mbps, 10 MHz - 4 GHz Plot 5.4.4.2.2. Conducted Spurious Emissions - Non Restricted Frequency Bands 802.11b, 2412 MHz, CCK 11 Mbps 4 GHz - 25 GHz ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.2.3. Conducted Spurious Emissions Non Restricted Frequency Bands 802.11b, 2437 MHz, CCK 11 Mbps, 10 MHz - 4 GHz Page 62 FCC ID: NS9NBG30 Plot 5.4.4.2.4. Conducted Spurious Emissions Non Restricted Frequency Bands, 802.11b, 2437 MHz, CCK 11 Mbps, 4 GHz - 25 GHz ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.2.5. Conducted Spurious Emissions Non Restricted Frequency Bands 802.11b, 2462 MHz, CCK 11 Mbps, 10 MHz - 4 GHz Page 63 FCC ID: NS9NBG30 Plot 5.4.4.2.6. Conducted Spurious Emissions Non Restricted Frequency Bands 802.11b, 2462 MHz, CCK 11 Mbps, 4 GHz - 25 GHz ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.2.7. Conducted Spurious Emissions - Non Restricted Frequency Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps 10 MHz - 4 GHz Page 64 FCC ID: NS9NBG30 Plot 5.4.4.2.8. Conducted Spurious Emissions - Non Restricted Frequency Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps 4 GHz - 25 GHz ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.2.9. Conducted Spurious Emissions Non Restricted Frequency Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, 10 MHz - 4 GHz Page 65 FCC ID: NS9NBG30 Plot 5.4.4.2.10. Conducted Spurious Emissions Non Restricted Frequency Bands, 802.11g, 2437 MHz, 64-QAM 54 Mbps, 4 GHz - 25 GHz ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.2.11. Conducted Spurious Emissions Non Restricted Frequency Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, 10 MHz - 4 GHz Page 66 FCC ID: NS9NBG30 Plot 5.4.4.2.12. Conducted Spurious Emissions Non Restricted Frequency Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, 4 GHz - 25 GHz ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.4.4.3. Conducted Spurious Emissions Restricted Bands, Lowest Power Setting (22 dBm) for Page 67 FCC ID: NS9NBG30 Highest Gain Antenna (15 dBi) Remark: Offset = Insertion Loss (11.33 dB) + Highest Antenna Gain (15dBi) = 26.3 dB Plot 5.4.4.3.1. Conducted Spurious Emissions Restricted Bands 802.11b, 2412 MHz, CCK 11 Mbps, 9 kHz - 150 kHz, Peak Detector ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.2. Conducted Spurious Emissions Restricted Bands 802.11b, 2412 MHz, CCK 11 Mbps, 150 kHz - 30 MHz, Peak Detector Page 68 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.3. Conducted Spurious Emissions Restricted Bands 802.11b, 2412 MHz, CCK 11 Mbps, 30 MHz - 1 GHz, Peak Detector Page 69 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 70 FCC ID: NS9NBG30 Plot 5.4.4.3.4. Conducted Spurious Emissions Restricted Bands 802.11b, 2412 MHz, CCK 11 Mbps, 1 GHz - 4 GHz, Trace Average with Band (Notch) Reject Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 71 FCC ID: NS9NBG30 Plot 5.4.4.3.5. Conducted Spurious Emissions Restricted Bands 802.11b, 2412 MHz, CCK 11 Mbps, 4 GHz - 25 GHz, Trace Average with High Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.6. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, 9 kHz - 150 kHz, Peak Detector Page 72 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.7. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, 150 kHz - 30 MHz, Peak Detector Page 73 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.8. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, 30 MHz - 1 GHz, Peak Detector Page 74 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 802.11b, 2437 MHz, CCK 11 Mbps, 1 GHz - 4 GHz, Trace Averaging with Band (Notch) Reject Filter Plot 5.4.4.3.9. Conducted Spurious Emissions Restricted Bands Page 75 FCC ID: NS9NBG30 Plot 5.4.4.3.10. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, Peak Power at 3.25 GHz with Band (Notch) Reject Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 76 FCC ID: NS9NBG30 Plot 5.4.4.3.11. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, 4 GHz - 25GHz, Trace Averaging with Band Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.12. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, 9 kHz - 150 kHz, Peak Detector Page 77 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.13. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, 150 kHz - 30 MHz, Peak Detector Page 78 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.14. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, 30 MHz - 1 GHz, Peak Detector Page 79 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 80 FCC ID: NS9NBG30 Plot 5.4.4.3.15. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, 1 GHz - 4 GHz, Trace Averaging with Band (Notch) Reject Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 81 FCC ID: NS9NBG30 Plot 5.4.4.3.16. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, 4 GHz - 25 GHz, Trace Averaging with High Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.17. Conducted Spurious Emissions Restricted Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps, 9 kHz - 150 kHz, Peak Detector Page 82 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.18. Conducted Spurious Emissions Restricted Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps, 150 kHz - 30 MHz, Peak Detector Page 83 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.19. Conducted Spurious Emissions Restricted Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps, 30 MHz - 1 GHz, Peak Detector Page 84 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 85 FCC ID: NS9NBG30 802.11g, 2412 MHz, 64-QAM 54 Mbps, 1 GHz - 4 GHz, Trace Average with Band (Notch) Reject Filter Plot 5.4.4.3.20. Conducted Spurious Emissions Restricted Bands ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 86 FCC ID: NS9NBG30 Plot 5.4.4.3.21. Conducted Spurious Emissions Restricted Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps, 4 GHz - 25 GHz, Trace Average with High Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.22. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, 9 kHz - 150 kHz, Peak Detector Page 87 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.23. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, 150 kHz - 30 MHz, Peak Detector Page 88 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.24. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, 30 MHz - 1 GHz, Peak Detector Page 89 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 802.11g, 2437 MHz, 64-QAM 54 Mbps, 1 GHz - 4 GHz, Trace Averaging with Band (Notch) Reject Filter Plot 5.4.4.3.25. Conducted Spurious Emissions Restricted Bands Page 90 FCC ID: NS9NBG30 Plot 5.4.4.3.26. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, Peak Power at 3.25 GHz with Band (Notch) Reject Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 91 FCC ID: NS9NBG30 Plot 5.4.4.3.27. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, 4 GHz - 25GHz, Trace Averaging with Band Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.28. Conducted Spurious Emissions Restricted Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, 9 kHz - 150 kHz, Peak Detector Page 92 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.29. Conducted Spurious Emissions Restricted Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, 150 kHz - 30 MHz, Peak Detector Page 93 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.3.30. Conducted Spurious Emissions Restricted Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, 30 MHz - 1 GHz, Peak Detector Page 94 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 95 FCC ID: NS9NBG30 802.11g, 2462 MHz, 64-QAM 54 Mbps, 1 GHz - 4 GHz, Trace Averaging with Band (Notch) Reject Filter Plot 5.4.4.3.31. Conducted Spurious Emissions Restricted Bands ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 96 FCC ID: NS9NBG30 Plot 5.4.4.3.32. Conducted Spurious Emissions Restricted Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, 4 GHz - 25 GHz, Trace Averaging with High Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.4.4.4. Conducted Spurious Emissions Restricted Bands, Highest Power Setting (30 dBm) for Page 97 FCC ID: NS9NBG30 Lowest Antenna Gain (2 dBi) Remark: Offset = Insertion Loss (21.25 dB) + Antenna Gain (2 dBi) = 23.3 dB Plot 5.4.4.4.1. Conducted Spurious Emissions Restricted Bands 802.11b, 2412 MHz, CCK 11 Mbps, 9 kHz - 150 kHz, Peak Detector ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.2. Conducted Spurious Emissions Restricted Bands 802.11b, 2412 MHz, CCK 11 Mbps, 150 kHz - 30 MHz, Peak Detector Page 98 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.3. Conducted Spurious Emissions Restricted Bands 802.11b, 2412 MHz, CCK 11 Mbps, 30 MHz - 1 GHz, Peak Detector Page 99 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 100 FCC ID: NS9NBG30 Plot 5.4.4.4.4. Conducted Spurious Emissions Restricted Bands 802.11b, 2412 MHz, CCK 11 Mbps, 1 GHz - 4 GHz, Trace Average with Band (Notch) Reject Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.5. Conducted Spurious Emissions Restricted Bands 802.11b, 2412 MHz, CCK 11 Mbps, 4 GHz - 25 GHz, Trace Average with High Pass Filter Page 101 FCC ID: NS9NBG30 802.11b, 2412 MHz, CCK 11 Mbps, 4 GHz - 25 GHz, Peak Power at 12.06 GHz with High Pass Filter Plot 5.4.4.4.6. Conducted Spurious Emissions Restricted Bands ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.7. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, 9 kHz - 150 kHz, Peak Detector Page 102 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.8. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, 150 kHz - 30 MHz, Peak Detector Page 103 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.9. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, 30 MHz - 1 GHz, Peak Detector Page 104 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.10. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, 1 GHz - 4 GHz, Trace Averaging with Band (Notch) Reject Filter Page 105 FCC ID: NS9NBG30 Plot 5.4.4.4.11. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, Peak Power at 3.25 GHz with Band (Notch) Reject Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.12. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, 4 GHz - 25GHz, Trace Averaging with Band Pass Filter Page 106 FCC ID: NS9NBG30 Plot 5.4.4.4.13. Conducted Spurious Emissions Restricted Bands 802.11b, 2437 MHz, CCK 11 Mbps, Peak Power at 12.19 GHz with Band Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.14. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, 9 kHz - 150 kHz, Peak Detector Page 107 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.15. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, 150 kHz - 30 MHz, Peak Detector Page 108 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.16. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, 30 MHz - 1 GHz, Peak Detector Page 109 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 110 FCC ID: NS9NBG30 Plot 5.4.4.4.17. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, 1 GHz - 4 GHz, Trace Averaging with Band (Notch) Reject Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.18. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, 4 GHz - 25 GHz, Trace Averaging with High Pass Filter Page 111 FCC ID: NS9NBG30 Plot 5.4.4.4.19. Conducted Spurious Emissions Restricted Bands 802.11b, 2462 MHz, CCK 11 Mbps, Peak Power at 12.31 GHz with High Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.20. Conducted Spurious Emissions Restricted Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps, 9 kHz - 150 kHz, Peak Detector Page 112 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.21. Conducted Spurious Emissions Restricted Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps, 150 kHz - 30 MHz, Peak Detector Page 113 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.22. Conducted Spurious Emissions Restricted Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps, 30 MHz - 1 GHz, Peak Detector Page 114 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 115 FCC ID: NS9NBG30 802.11g, 2412 MHz, 64-QAM 54 Mbps, 1 GHz - 4 GHz, Trace Average with Band (Notch) Reject Filter Plot 5.4.4.4.23. Conducted Spurious Emissions Restricted Bands ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.24. Conducted Spurious Emissions Restricted Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps, 4 GHz - 25 GHz, Trace Average with High Pass Filter Page 116 FCC ID: NS9NBG30 Plot 5.4.4.4.25. Conducted Spurious Emissions Restricted Bands 802.11g, 2412 MHz, 64-QAM 54 Mbps, Peak Power at 12.06 GHz with High Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.26. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, 9 kHz - 150 kHz, Peak Detector Page 117 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.27. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, 150 kHz - 30 MHz, Peak Detector Page 118 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.28. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, 30 MHz - 1 GHz, Peak Detector Page 119 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 802.11g, 2437 MHz, 64-QAM 54 Mbps, 1 GHz - 4 GHz, Trace Averaging with Band (Notch) Reject Filter Plot 5.4.4.4.29. Conducted Spurious Emissions Restricted Bands Page 120 FCC ID: NS9NBG30 Plot 5.4.4.4.30. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, Peak Power at 3.25 GHz with Band (Notch) Reject Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.31. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, 4 GHz - 25 GHz, Trace Averaging with High Pass Filter Page 121 FCC ID: NS9NBG30 Plot 5.4.4.4.32. Conducted Spurious Emissions Restricted Bands 802.11g, 2437 MHz, 64-QAM 54 Mbps, Peak Power at 12.18 GHz with Band Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 122 FCC ID: NS9NBG30 Plot 5.4.4.4.33. Conducted Spurious Emissions Restricted Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, 9 kHz - 150 kHz, Peak Detector ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.34. Conducted Spurious Emissions Restricted Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, 150 kHz - 30 MHz, Peak Detector Page 123 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.35. Conducted Spurious Emissions Restricted Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, 30 MHz - 1 GHz, Peak Detector Page 124 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 125 FCC ID: NS9NBG30 802.11g, 2462 MHz, 64-QAM 54 Mbps, 1 GHz - 4 GHz, Trace Averaging with Band (Notch) Reject Filter Plot 5.4.4.4.36. Conducted Spurious Emissions Restricted Bands ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Plot 5.4.4.4.37. Conducted Spurious Emissions Restricted Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, 4 GHz - 25 GHz, Trace Averaging with High Pass Filter Page 126 FCC ID: NS9NBG30 Plot 5.4.4.4.38. Conducted Spurious Emissions Restricted Bands 802.11g, 2462 MHz, 64-QAM 54 Mbps, Peak Power at 12.31 GHz with High Pass Filter ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 Page 127 FCC ID: NS9NBG30 TRANSMITTER SPURIOUS RADIATED EMISSIONS AT 3 METERS [ 15.247(d), 15.209 & 15.205]

FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.5. 5.5.1. Limit 15.247 (d): In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in Section 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section 15.209(a) (see Section 15.205(c)). Section 15.205(a) - Restricted Bands of Operation Section 15.209(a) - Field Strength Limits within Restricted Frequency Bands Frequency (MHz) Field Strength

(microvolts/meter) Measurement Distance

(meters) 0.009 - 0.490 0.490 - 1.705 1.705 - 30.0 30 88 88 216 216 960 Above 960 2,400 / F (kHz) 24,000 / F (kHz) 30 100 150 200 500 300 30 30 3 3 3 3 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.5.2. Method of Measurements KDB Publication No. 558074 D01: Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under 15.247. 5.5.3. Test Arrangement Page 128 FCC ID: NS9NBG30 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.5.4. Test Data Remark(s):

All spurious emissions that are in excess of 20 dB below the specified limit shall be recorded. EUT shall be tested in three orthogonal positions. For compliance with spurious emissions, power reduction is required for 802.11b mode:

(i) DBPSK 1 Mbps, software power setting of 55 (output power: 27.18 dBm at 2412 MHz, 28.84 dBm at 2437 MHz and Page 129 FCC ID: NS9NBG30 26.97 dBm at 2462 MHz) and and 26.80 dBm at 2462 MHz.

(ii) DQPSK 2 Mbps, software power setting of 54 (output power: 27.85 dBm at 2412 MHz, 28.87 dBm at 2437 MHz 15.247 (d) spurious emission limit:

Exploratory tests performed to determined worst-case test configurations, the following test results at high E = (EIRP - 20log(d) + 104.8) 20 =(36 dBm 20log(3) + 104.8) 20 = 111.3 dBV/m power setting represent the worst-case. 5.5.4.1. 802.11 Mode, DBPSK 1 Mbps, High Power Setting 55 Fundamental Frequency:

Power Setting:

Frequency Test Range:

2412 MHz 27.18 dBm (Software power setting at 55) 30 MHz 25 GHz RF RF Antenna Plane

(H/V) Limit 15.209

(dBV/m) Limit 15.247

(dBV/m) Frequency 49.74 49.84 Avg Level

(dBV/m) Peak Level

(dBV/m)

(MHz) 4824 4824 Margin

(dB)

-12.9

-14.3 All other spurious emissions and harmonics are more than 20 dB below the applicable limit.

*Field strength of emissions appearing within restricted frequency bands shall not exceed the limits in 15.209. 41.12 39.75 111.3 111.3 54.0 54.0 V H Pass/

Fail Pass*

Pass*

Fundamental Frequency:

Power Setting:

Frequency Test Range:

2437 MHz 28.84 dBm (Software power setting at 55) 30 MHz 25 GHz RF RF Antenna Plane

(H/V) Limit 15.209

(dBV/m) Limit 15.247

(dBV/m) Frequency Avg Level

(dBV/m) Peak Level

(dBV/m)

(MHz) 4874 4874 7311 7311 Margin

(dB)

-15.56

-15.37

-0.92

-3.09 All other spurious emissions and harmonics are more than 20 dB below the applicable limit.

*Field strength of emissions appearing within restricted frequency bands shall not exceed the limits in 15.209. 38.44 38.63 53.08 50.91 49.04 49.24 59.71 58.30 111.3 111.3 111.3 111.3 54.0 54.0 54.0 54.0 V H V H Pass/

Fail Pass*

Pass*

Pass*

Pass*

ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Fundamental Frequency:

Power Setting:

Frequency Test Range:

2462 MHz 26.97 dBm (Software power setting at 55) 30 MHz 25 GHz Page 130 FCC ID: NS9NBG30 Frequency

(MHz) 4924 4924 7386 7386 RF Peak Level

(dBV/m) RF Avg Level

(dBV/m) Antenna Plane

(H/V) Limit 15.209

(dBV/m) Limit 15.247

(dBV/m) 48.27 49.96 58.94 57.95 38.34 39.79 50.35 49.69 V H V H 54.0 54.0 54.0 54.0 111.3 111.3 111.3 111.3 Margin

(dB)

-15.7

-14.2

-3.7

-4.3 Pass/

Fail Pass*

Pass*

Pass*

Pass*

All other spurious emissions and harmonics are more than 20 dB below the applicable limit.

*Field strength of emissions appearing within restricted frequency bands shall not exceed the limits in 15.209. 5.5.4.2. 802.11g Mode, 64-QAM 54 Mbps, High Power Setting 57 Fundamental Frequency:

Power Setting:

Frequency Test Range:

2412 MHz 29.96 dBm (Software power setting at 57) 30 MHz 25 GHz Frequency

(MHz) 4824 4824 RF Peak Level

(dBV/m) RF Avg Level

(dBV/m) Antenna Plane

(H/V) Limit 15.209

(dBV/m) 55.27 57.04 41.65 44.09 V H 54.0 54.0 Limit 15.247

(dBV/m) 111.3 111.3 Margin

(dB)

-12.4

-9.9 Pass/

Fail Pass*

Pass*

All other spurious emissions and harmonics are more than 20 dB below the applicable limit.

*Field strength of emissions appearing within restricted frequency bands shall not exceed the limits in 15.209. Fundamental Frequency:

Power Setting:

Frequency Test Range:

2437 MHz 29.86 dBm (Software power setting at 57) 30 MHz 25 GHz RF RF Antenna Plane

(H/V) Limit 15.209

(dBV/m) Limit 15.247

(dBV/m) Frequency Avg Level

(dBV/m) Peak Level

(dBV/m)

(MHz) 4874 4874 Margin

(dB)

-9.08

-8.16 All other spurious emissions and harmonics are more than 20 dB below the applicable limit.

*Field strength of emissions appearing within restricted frequency bands shall not exceed the limits in 15.209. 44.92 45.84 59.08 60.14 111.3 111.3 54.0 54.0 V H Pass/

Fail Pass*

Pass*

ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Fundamental Frequency:

Power Setting:

Frequency Test Range:

2462 MHz 29.81 dBm (Software power setting at 57) 30 MHz 25 GHz Page 131 FCC ID: NS9NBG30 RF RF Antenna Plane

(H/V) Limit 15.209

(dBV/m) Limit 15.247

(dBV/m) Frequency Avg Level

(dBV/m) Peak Level

(dBV/m)

(MHz) 4924 4924 Margin

(dB)

-9.5

-10.8 All other spurious emissions and harmonics are more than 20 dB below the applicable limit.

*Field strength of emissions appearing within restricted frequency bands shall not exceed the limits in 15.209. 44.55 43.20 58.46 57.04 111.3 111.3 54.0 54.0 V H Pass/

Fail Pass*

Pass*

ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.6. 5.6.1. Limit(s) For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. POWER SPECTRAL DENSITY [ 15.247(e)]

Page 132 FCC ID: NS9NBG30 5.6.2. Method of Measurements KDB Publication No. 558074 D01 Section 5.3.1 Measurement Procedure PKPSD. 5.6.3. Test Arrangement 5.6.4. Test Data Remark: Measurement method: Section 5.3.1 Measurement Procedure PKPSD Operation Mode Frequency

(MHz) Modulation /

Data Rate

(Mbps) Software/

PCDAC Power Setting 2412 2437 2462 DBPSK / 1 DQPSK / 2 CCK / 11 DBPSK / 1 DQPSK / 2 CCK / 11 DBPSK / 1 DQPSK / 2 CCK / 11 55 54 53 55 54 53 55 54 53 802.11b High Power

*PSD in 3 kHz BW

(dBm) 0.45 1.36 1.22

-0.46 2.52 3.54

-3.61 0.23 0.49 Margin

(dB)

-7.55

-6.64

-6.78

-8.46

-5.48

-4.46

-11.61

-7.77

-7.51 Limit

(dBm) 8 8 8 8 8 8 8 8 8 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 Page 133 FCC ID: NS9NBG30 Limit

(dBm) 8 8 8 8 8 8 8 8 8 8 8 8 Margin

(dB)

-10.14

-10.32

-9.1

-9.15

-9.17

-8.84

-7.83

-7.64

-10.69

-10.71

-9.51

-9.41

*PSD in 3 kHz BW

(dBm)

-2.14

-2.32

-1.10

-1.15

-1.17

-0.84 0.17 0.36

-2.69

-2.71

-1.51

-1.41 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Operation Mode Frequency

(MHz) 802.11g High Power 2412 2437 2462 Modulation /

Data Rate

(Mbps) BPSK / 9 QPSK / 18 16-QAM /36 64-QAM /54 BPSK / 9 QPSK / 18 16-QAM /36 64-QAM /54 BPSK / 9 QPSK / 18 16-QAM /36 64-QAM /54 See the following plots for measurement details. Software/

PCDAC Power Setting 54 54 57 57 54 54 57 57 54 54 57 57 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 134 FCC ID: NS9NBG30 Plot 5.6.4.1. Power Spectral Density 802.11b, 2412 MHz, DBPSK 1 Mbps, Power Setting 55 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 135 FCC ID: NS9NBG30 Plot 5.6.4.2. Power Spectral Density 802.11b, 2437 MHz, DBPSK 1 Mbps, Power Setting 55 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 136 FCC ID: NS9NBG30 Plot 5.6.4.3. Power Spectral Density 802.11b, 2462 MHz, DBPSK 1 Mbps, Power Setting 55 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 137 FCC ID: NS9NBG30 Plot 5.6.4.4. Power Spectral Density 802.11b, 2412 MHz, DQPSK 2 Mbps, Power Setting 54 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 138 FCC ID: NS9NBG30 Plot 5.6.4.5. Power Spectral Density 802.11b, 2437 MHz, DQPSK 2 Mbps, Power Setting 54 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 139 FCC ID: NS9NBG30 Plot 5.6.4.6. Power Spectral Density 802.11b, 2462 MHz, DQPSK 2 Mbps, Power Setting 54 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 140 FCC ID: NS9NBG30 Plot 5.6.4.7. Power Spectral Density 802.11b, 2412 MHz, CCK 11 Mbps, Power Setting 53 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 141 FCC ID: NS9NBG30 Plot 5.6.4.8. Power Spectral Density 802.11b, 2437 MHz, CCK 11 Mbps, Power Setting 53 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 142 FCC ID: NS9NBG30 Plot 5.6.4.9. Power Spectral Density 802.11b, 2462 MHz, CCK 11 Mbps, Power Setting 53 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 143 FCC ID: NS9NBG30 Plot 5.6.4.10. Power Spectral Density 802.11g, 2412 MHz, BPSK 9 Mbps, Power Setting 54 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 144 FCC ID: NS9NBG30 Plot 5.6.4.11. Power Spectral Density 802.11g, 2437 MHz, BPSK 9 Mbps, Power Setting 54 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 145 FCC ID: NS9NBG30 Plot 5.6.4.12. Power Spectral Density 802.11g, 2462 MHz, BPSK 9 Mbps, Power Setting 54 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 146 FCC ID: NS9NBG30 Plot 5.6.4.13. Power Spectral Density 802.11g, 2412 MHz, QPSK 18 Mbps, Power Setting 54 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 147 FCC ID: NS9NBG30 Plot 5.6.4.14. Power Spectral Density 802.11g, 2437 MHz, QPSK 18 Mbps, Power Setting 54 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 148 FCC ID: NS9NBG30 Plot 5.6.4.15. Power Spectral Density 802.11g, 2462 MHz, QPSK 18 Mbps, Power Setting 54 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 149 FCC ID: NS9NBG30 Plot 5.6.4.16. Power Spectral Density 802.11g, 2412 MHz, 16-QAM 36 Mbps, Power Setting 57 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 150 FCC ID: NS9NBG30 Plot 5.6.4.17. Power Spectral Density 802.11g, 2437 MHz, 16-QAM 36 Mbps, Power Setting 57 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 151 FCC ID: NS9NBG30 Plot 5.6.4.18. Power Spectral Density 802.11g, 2462 MHz, 16-QAM 36 Mbps, Power Setting 57 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 152 FCC ID: NS9NBG30 Plot 5.6.4.19. Power Spectral Density 802.11g, 2412 MHz, 64-QAM 54 Mbps, Power Setting 57 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 153 FCC ID: NS9NBG30 Plot 5.6.4.20. Power Spectral Density 802.11g, 2437 MHz, 64-QAM 54 Mbps, Power Setting 57 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Page 154 FCC ID: NS9NBG30 Plot 5.6.4.21. Power Spectral Density 802.11g, 2462 MHz, 64-QAM 54 Mbps, Power Setting 57 Offset: Insertion Loss + BWCF = 21.25 dB + 10*log(3 kHz/ 100 kHz) = 6.1 dB ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 5.7. The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation. RF EXPOSURE REQUIRMENTS [ 15.247(i), 1.1310 & 2.1091]

Page 155 FCC ID: NS9NBG30 FCC 47 CFR 1.1310:

5.7.1. Method of Measurements Refer to Sections 1.1310, 2.1091 In order to demonstrate compliance with MPE requirements (see Section 2.1091), the following information is typically needed:

(1) Calculation that estimates the minimum separation distance (20 cm or more) between an antenna and persons required to satisfy power density limits defined for free space.

(2) Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement

(3) Any caution statements and/or warning labels that are necessary in order to comply with the exposure limits

(4) Any other RF exposure related issues that may affect MPE compliance ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 Page 156 FCC ID: NS9NBG30 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 Calculation Method of RF Safety Distance:

S GP r 2 4 EIRP r 4 2 P: power input to the antenna in mW EIRP: Equivalent (effective) isotropic radiated power S: power density mW/cm2 G: numeric gain of antenna relative to isotropic radiator r: distance to centre of radiation in cm Where:

5.7.2. RF Evaluation Evaluation of RF Exposure Compliance Requirements RF Exposure Requirements Compliance with FCC Rules Minimum calculated separation distance between antenna and persons required: *18 cm Manufacturer instruction for separation distance between antenna and persons required: 23 cm. Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement Antenna installation and device operating instructions shall be provided to installers to maintain and ensure compliance with RF exposure requirements. Caution statements and/or warning labels that are necessary in order to comply with the exposure limits Any other RF exposure related issues that may affect MPE compliance Refer to Users Manual for RF Exposure Information. None.

*The minimum separation distance between the antenna and bodies of users are calculated using the following formula:

RF EXPOSURE DISTANCE LIMITS r GP S 4 EIRP S 4 S = 1.0 mW/cm2 EIRP = 36.0 dBm = 1036/10 mW = 3981 mW (Worst Case)

(Minimum Safe Distance, r) =

EIRP S 4 3981

)0.1(

4 18 cm ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 EXHIBIT 6. Test Instruments Spectrum Analyzer L.I.S.N Manufacturer Hewlett Packard ULT AC LISN TEST EQUIPMENT LIST Model No. HP 8593EM

--

Attenuator Band Pass Filter Spectrum Analyzer Attenuator DC Block High Pass Filter Attenuator Band Reject (Notch) Filters Spectrum Analyzer RF Amplifier RF Amplifier Horn Antenna Biconi-Log Antenna DC Power Supply Pasternack Telemeter Electronics Rohde & Schwarz Narda Hewlett Packard K & L Pasternack Micro-Tronics Rohde & Schwarz Hewlett Packard AH System EMCO EMCO Xantrex Page 157 FCC ID: NS9NBG30 Frequency Range Cal. Due Date 9 kHz 26.5 GHz 10 kHz 30 MHz 30 Jan 2013 21 Feb 2013 DC 2 GHz

-

20Hz40 GHz DC40 GHz 0.04526.5 GHz Cut off at 3900 MHz DC26.5 GHz Stopband: 2400 to 2500 MHz 20 Hz 40 GHz 1 26.5 GHz 20 MHz 18 GHz 1 18 GHz 26 3000 MHz 0 60 V 09 Jan 2013 17 Aug 2013 27 Sep 2012 Cal on use Cal on use Cal. on use Cal on use Cal on use 19 Mar 2013 01 Dec 2012 16 Mar 2013 20 Feb 2013 04 May 2013 Cal on use Serial No. 3412A00103 ULT-01;-02;-

03;-04

-

2110465-007 PE7010-20 MTA-HPF-150 FSEK30 4768-20 11742A 11SH10-

4000/T12000-O/O PE7024-10 BRM50701 100077

-

12460 4

-

105 ESU40 84498 PAM-0118 3155 3142C HPD 60-5SX 100037 3008A00769 225 5955 00034792 56218 ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012 FCC Part 15, Subpart C, Section 15.247 DTS 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 EXHIBIT 7. MEASUREMENT UNCERTAINTY The measurement uncertainties stated were calculated in accordance with the requirements of CISPR 16-4-2 @

IEC:2003 and JCGM 100:2008 (GUM 1995) Guide to the Expression of Uncertainty in Measurement. Page 158 FCC ID: NS9NBG30 LINE CONDUCTED EMISSION MEASUREMENT UNCERTAINTY Line Conducted Emission Measurement Uncertainty

(150 kHz 30 MHz):

Combined standard uncertainty:

uc(y) = mui I=1 Expanded uncertainty U:

U = 2uc(y) 2(y) RADIATED EMISSION MEASUREMENT UNCERTAINTY Radiated Emission Measurement Uncertainty @ 3m, Horizontal

(30-1000 MHz):

Combined standard uncertainty:

uc(y) = mui I=1 Expanded uncertainty U:

U = 2uc(y) 2(y) Radiated Emission Measurement Uncertainty @ 3m, Vertical

(30-1000 MHz):

Combined standard uncertainty:

uc(y) = mui I=1 Expanded uncertainty U:

U = 2uc(y) 2(y) Measured

+ 1.57

+ 3.14 Measured

+ 2.15

+ 4.30 Measured

+ 2.39

+ 4.78 Limit

+ 1.8

+ 3.6 Limit

+ 2.6

+ 5.2 Limit

+ 2.6

+ 5.2 Radiated Emission Measurement Uncertainty @ 3 m, Horizontal &

Vertical (1 18 GHz):

Combined standard uncertainty:

uc(y) = mui I=1 Expanded uncertainty U:

U = 2uc(y) 2(y) Measured Limit

+ 1.87

+ 3.75 Under consideration Under consideration 7.1. uc U 7.2. uc U uc U uc U ULTRATECH GROUP OF LABS 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) File #: MCRS-046F15C247 June 4, 2012

ANNEX 1 - TEST SETUP PHOTOS Power Line Conducted Emissions Microhard Systems Inc. 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 FCC ID: NS9NBG30 A1 - 1 ANNEX 1 - TEST SETUP PHOTOS Power Line Conducted Emissions Microhard Systems Inc. 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 FCC ID: NS9NBG30 A1 - 2 ANNEX 1 - TEST SETUP PHOTOS Radiated Emissions @ 3 m Microhard Systems Inc. 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 FCC ID: NS9NBG30 A1 - 3 ANNEX 1 - TEST SETUP PHOTOS Radiated Emissions @ 3 m Microhard Systems Inc. 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 FCC ID: NS9NBG30 A1 - 4 ANNEX 1 - TEST SETUP PHOTOS Radiated Emissions @ 3 m Microhard Systems Inc. 2.4GHz 802.11bg 1W OEM Module, Model n802.11bg-30 FCC ID: NS9NBG30 A1 - 5