Tracker
AT NG
User Manual
Revision: 1.00
Document Title
AT NG User manual
Version
Finale Date
Status
1.00
2021-05-31
Released
Document Control ID
TRACKER AT NG
1
Contents
1 Introduction...................................................................................................................................... 3
2 Product Overview.............................................................................................................................3
2.1 Appearance............................................................................................................................ 3
2.2 LED Description................................................................................................................... 4
3 Getting Started..................................................................................................................................5
3.1 Parts List................................................................................................................................5
3.2 How GPS position Fix.......................................................................................................... 5
3.3 Insert SIM Card.....................................................................................................................6
3.4 Device Power on................................................................................................................... 6
4 Trouble shooting and Safety info..................................................................................................... 7
4.1 Trouble shooting................................................................................................................... 7
4.2 Safety info............................................................................................................................. 7
2
1 Introduction
AT NG use lithium battery. it is a powerful GPS locator which is designed for vehicle, and
assets tracking . With superior receiving sensitivity, Its location can be real time or schedule
tracked by backend server or specified terminals. Based on the embedded wireless tracking
protocol, AT NG can communicate with the backend server through LTE Cat-M network, and
transfer reports of emergency, Geo-fencing, device status and scheduled GPS position etc…
Service provider is easy to setup their tracking platform based on the functional wireless tracking
protocol.
The WIFI function will be activated and report the MAC addresses once the device is in
alerting state.
2 Product Overview
2.1 Appearance
Figure 2-1
3
2.2 LED Description
There is one tricolour LED lights in AT NG device, the description as following.
Figure 2-2
Light
Event
LED show blue
GPS fixed
LED show red
low power
State
Solid
Solid
4
3 Getting Started
3.1 Parts List
Name
Picture
Remark
AT NG
The LTE/GPS locator.
3.2 How GPS position Fix
Your device has an unobstructed view of the sky,lying face up,so it can obtain the initial
GPS Fix
Figure 3-1
5
3.3 Insert SIM Card
3.5 Device Power on
Long press the power button for 4 seconds, and the device will start when the red and
blue light lights up
Figure 3-4
Figure 3-5
6
4 Trouble shooting and Safety info
4.1 Trouble shooting
Trouble
Possible Reason
Solution
Messages can’t be
reported to the
backend server by
Mobile network.
APN is wrong. Some
APN can not visit the
internet directly.
Ask the network operator for the right
APN.
Unable to power
off AT NG.
Battery can not be
charged
AT NG can’t fix
GPS successfully.
The IP address or port of
the backend server is
wrong.
Make sure the IP address for the
backend server is an identified address
in the internet.
The function of power key
was disabled by
AT+GTFKS.
Enable the function of power key by
AT+GTFKS.
The battery has not been
used for too long time and
has been locked.
Using a external power source with
3.65V DC power supply to active the
battery or apply for after sale help.
The GPS signal is weak.
Please move AT NG to a place with
open sky.
It is better to let the top surface face to
the sky. (The same surface with
indication LED)
4.2 Safety info
The following items are suggestion for safety use, please pay more attention.
Please do not disassemble the device by yourself.
Please do not put the device on the overheating or too humid place, avoid exposure
to direct sunlight. Too high temperature will damage the device or even cause the
battery explosion.
Please do not use AT NG on the airplane or near medical equipment.
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
7
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated withmini
mum distance 20cm between the radiator & your body.
IC Caution:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference,
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
8