LTE Tracker AT Plus 4G User Manual Revision: 1.00 Document Title Version Finale Date Status Document Control ID AT Plus 4G User manual 1.00 2018-11-06 Released TRACKER AT Plus 4G 1 Contents 1 Introduction .................................................................................................................................... 3 2 Product Overview .......................................................................................................................... 3 2.1 Appearance .......................................................................................................................... 3 2.2 Buttons/USB Interface Description ..................................................................................... 3 2.3 LED Description ................................................................................................................. 4 3 Getting Started ............................................................................................................................... 5 3.1 Parts List ............................................................................................................................. 5 3.2 Battery Charging ................................................................................................................. 5 3.3 AT Plus 4G Charger ............................................................................................................ 5 3.4 Power on/Power off ............................................................................................................. 6 4 Frequency ....................................................................................................................................... 6 5 Trouble shooting and Safety info ................................................................................................... 7 5.1 Trouble shooting ................................................................................................................. 7 5.2 Safety info ........................................................................................................................... 7 2 1 Introduction AT Plus 4G is a powerful GPS locator which is designed for vehicle, human, pets and assets tracking. It works on LTE CATM1 B2/B4/B12 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, AT Plus 4G can communicate with the backend server through LTE network, and transfer reports of emergency, Geo-fencing, device status and scheduled GPS position etc Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol. 2 Product Overview 2.1 Appearance Figure 1-1 2.2 Buttons/USB Interface Description Button /12PIN Interface Description KEY/interface Power Key Description Power on AT Plus 4G Power off AT Plus 4G (If power key is enabled) SOS mode Function Key USB interface Reset Key Connected to a charger can power on AT Plus 4G Backend server developer or administrator can use the debug cable to configure AT Plus 4G (by engineer not by end user). Click the key will turn off internal VBAT when OS is abnormal, and then press Power Key to restart AT Plus 4G. 3 2.3 LED Description There are four LED lights in AT Plus 4G device, the description as following. Figure 1-2 State Fast flash Dark Solid Dark Solid Slow flash Solid Solid Slow flash Solid Power LED Light GPS LED Event GPS signal valid GPS turned off, GPS signal invalid Power key was pressed and prepare to power on Power on and normal Fully charged In charging Power key was pressed and prepare to power off Power key was pressed and prepare to power on WIFI LED WIFI on Power key was pressed and prepare to power on 4 3 Getting Started 3.1 Parts List Name AT Plus 4G Locater Picture Remark The LTE/GPS locator. AT Plus 4G charger It used to be charging for the AT Plus 4G. 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. During the charging process, the Power LED light will slow flash. When the battery is fully charged, the Power LED light will be Ever-dark. You can charge the battery using charging dock which connects AT Plus 4G device with the Adapter. Charging will last about 5 hours. Note: If the AT Plus 4G device is firstly used, please make sure the battery is fully charged, which will make the life of battery much longer. 3.3 AT Plus 4G Charger AT Plus 4G is charging with an AC Adapter. The charger is used for device charging , which can be used for charging at the any time
( by end user).. 5 3.4 Power on/Power off Figure 2-1 Figure 2-2 Power on:
Press the Power key at least 3 seconds and release it to power on AT Plus 4G device. Note that, the Power LED light will light for a moment and then turn off. Power off:
Press the power key about 3 seconds; Power LED light will light for a moment and then turn off, which indicates that AT Plus 4G device has been powered off. Note: the user can not power off AT Plus 4G if the power key is disabled by protocol. 4 Frequency LTE: Band2Band4Band12 GPS:1575.42MHz WIFI:2.4GHz 6 5 Trouble shooting and Safety info 5.1 Trouble shooting Trouble Messages cant be reported to the backend server by Mobile network. Unable to power off AT Plus 4G. Battery can not be charged AT Plus 4G cant fix GPS successfully. Possible Reason APN is wrong. Some APN can not visit the internet directly. The IP address or port of the backend server is wrong. The function of power key was disabled by AT+GTFKS. The battery has not been used for too long time and has been locked. The GPS signal is weak. Solution Ask the network operator for the right APN. Make sure the IP address for the backend server is an identified address in the internet. Enable the function of power key by AT+GTFKS. Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help. Please move AT Plus 4G to a place with open sky. It is better to let the top surface face to the sky. (The same surface with indication LED) 5.2 Safety info The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use AT Plus 4G on the airplane or near medical equipment. 7 FCC Caution. FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RF Exposure Information (SAR) :
The SAR limit of is 1.6W/Kg averaged over one gram of tissue. Product Type: Tracker ,
(FCC ID: ZKQ-
The device was test for typical body-worn and Face up operations, to maintain compliance with RF exposure requirements, please keep a 5mm separation distance between the user face and device.
) has also been tested against this SAR limit. ATP4GA, IC:8414B-ATP4GA
, la limite de das de ic est 1.6w/kg en moyenne par gramme de tissu.produit, modle numro:AT Plus 4G (IC: 8414B-ATP4GA) a galement t test typique des oprations ports avec le dos de la partie du corps combin continuait d'ic, pour maintenir la conformit aux exigences d'exposition aux rf, utilisation des accessoires de maintenir une distance de sparation entre l'utilisateur corps de 5 mmet l'arrire de l'appareil. 8