LTE Tracker Bolt 4GV User Manual Revision: 1.00 Document Title Version Finale Date Status Document Control ID Bolt 4GV User manual 1.00 2018-11-06 Released TRACKER Bolt 4GV 1 Contents 1 Introduction .................................................................................................................................... 3 2 Product Overview .......................................................................................................................... 3 2.1 Appearance .......................................................................................................................... 3 2.2 Buttons/USB Interface Description ..................................................................................... 3 2.3 LED Description ................................................................................................................. 4 3 Getting Started ............................................................................................................................... 4 3.1 Parts List ............................................................................................................................. 4 3.2 Battery Charging ................................................................................................................. 5 3.3 Bolt 4GV Charger ................................................................................................................ 5 3.4 Power on/Power off ............................................................................................................. 6 4 Frequency ....................................................................................................................................... 6 4.1 WIFI..................................................................................................................................... 6 4.1 433 ..................................................................................................................................... 6 4.1 users are using the 433 method............................................................................................ 6 5 Trouble shooting and Safety info ................................................................................................... 7 5.1 Trouble shooting ................................................................................................................. 7 5.2 Safety info ........................................................................................................................... 7 2 1 Introduction Bolt 4GV is a powerful GPS locator which is designed for vehicle and assets tracking. It works on LTE CATM1 with superior receiving sensitivity. Its location can be real time or schedule tracked by back-end server or specified terminals. Based on the embedded wireless tracking protocol, Bolt 4GV can communicate with the back-end server through LTE network, and transfer reports of emergency, Geo-fencing, device status and scheduled GPS position etc Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol. 2 Product Overview 2.1 Appearance Figure 1-1 2.2 Buttons/USB Interface Description Button /12PIN Interface Description KEY/interface Power Key Description No Power Key, the Bolt 4GV can only be powered on by charger plug in. USB interface Reset Key Connected to a charger can power on Bolt 4GV Back-end server developer or administrator can use the debug cable to configure Bolt 4GV (by engineer not by end user). Click the key will turn off internal VBAT when OS is abnormal, and then plug in a charger to restart Bolt 4GV. 3 2.3 LED Description There are four LED lights in Prime Bolt 4GV device, the description as following. Figure 1-2 Light LTE LED Power LED Event Power on Power on and normal Fully charged In charging The charger plug in to power on the device State Slow flash (blue) Dark Slow flash (green) Slow flash (red) Solid (White) 3 Getting Started 3.1 Parts List Name Picture Remark 4 Bolt 4GV Locater The LTE/GPS locator. Bolt 4GV charger It used to be charging for the Bolt 4GV. 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. During the charging process, the Power LED light will slow flash. When the battery is fully charged, the Power LED light will be Ever-dark. You can charge the battery using charging dock which connects Bolt 4GV device with the Adapter. Charging will last about 5 hours. Note: If the Bolt 4GV device is firstly used, please make sure the battery is fully charged, which will make the life of battery much longer. 3.3 Bolt 4GV Charger Bolt 4GV is charging with an AC Adapter. The charger is used for device charging , which can be used for charging at the any time
( by end user).. Figure 2-1 5 3.4 Power on/Power off Power on:
The Bolt 4GV can only be powered on by a charger plug in.. Figure 2-2 Power off:
Press the Reset key , the device will turn off immediately. Once turned on, the charger can be unplugged. The follow-up is to rely on the battery to maintain work. 4 Frequency LTE: CATM1 GPS: 1575.42MHz WIFI: 2.4GHz SRD: 433.5MHz 4.1 WIFI The WIFI function of device only used for WIFI MAC address searching and report. 4.2 433 433 function is used to assist positioning system 4.3 users are using the 433 method:
Insert a 4G SIM into the product, send an order to open (close) 433 to the phone card inside the product through another mobile phone, then open 433, and detect 433 signals by an instrument that can detect 433 frequency. Open command 433:AT+GTRFD=AIR11,1,2,433.00,,,,,,,,,001D$
Close command 433:AT+GTRFD=AIR11,0,2,433.00,,,,,,,,,001D$
6 5 Trouble shooting and Safety info 5.1 Trouble shooting Trouble Messages cant be reported to the backend server by Mobile network. Unable to power off Bolt 4GV. Battery can not be charged Bolt 4GV cant fix GPS successfully. Possible Reason APN is wrong. Some APN can not visit the internet directly. The IP address or port of the backend server is wrong. The function of power key was disabled by AT+GTFKS. The battery has not been used for too long time and has been locked. The GPS signal is weak. Solution Ask the network operator for the right APN. Make sure the IP address for the backend server is an identified address in the internet. Enable the function of power key by AT+GTFKS. Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help. Please move Bolt 4GV to a place with open sky. It is better to let the top surface face to the sky. (The same surface with indication LED) 5.2 Safety info The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use Bolt 4GV on the airplane or near medical equipment. FCC Caution. 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. 7 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withmini mum distance 20cm between the radiator & your body. ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le rayonnement de la classe b repecte ISED fixaient un environnement non contrls.Installation et mise en uvre de ce matriel devrait avec changeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec dautres. 8