Parts Sample Approval Sheet Temporary Sample Standard Sample Limit sample Project Name:
PA30 PA30 Supplier Name: Kunshan Innowave Communication Technology CO.,Ltd. F04710110J10001 Supplier Part Number: F04710110J10001 Sample Sealed Time: 2022-3-3 2022-3-3 Supplier Approval Official seal Verify Check Writer YiKe Approval ODM/ R&D ID/CMF QA A B C D 1 2 3 4 5 Number of disposals Mark 6 7 change content Adjust the size of the product according to the actual product 1 2 2 snap buckle glue, 15 size changed from 32.3 to 32.5 Adjust the position of the cave number and add the "V1" logo sign Luo Xiulan Luo Xiulan Luo Xiulan 8 date 2019.12.14 2020.01.03 2020.02.22 1 2
2 1
. 0 0 0
. 2 9 10 5 3
. 0 0 3
. 3 12 5 3
. 0 0 4
. 2 11 1 CPK 35.200.12 CPK 2 2 1
. 0 7 2
. 2 1 3 CPK
2 1
. 0 0 0
. 8 5 15 32.500.05 1 6.100.35 2.400.35 7 8 4 5 2-0.800.35 2-0.800.35 0.980.35
2 1
. 0 0 1
. 2 13 2-0.600.35 6 V1 1 2 logotypeV1 14 6.500.35 Cave number123 2 A B This column is hot melted 2 1 3 This 3 sides are polished 4 V 1 1 CPK 1 Technical requirements:
1. Hit the key size, " " is the size of CPK, "( )" is the actual size, " " is the design change;
2. The unmarked size is subject to the electronic file, the unmarked tolerance is in accordance with SJ/T 10628 1995 grade 6, and the tolerance value is divided equally by the upper and lower deviations;
3. After the assembly of each component, it should be smooth and tidy, and there should be no oil, scratches, deformation and other poor appearance 4. The standard after the steel sheet and the bracket are assembled together shall be implemented according to the company's internal standards;
5. The hot melt column is 0.50mm higher than the surface of the bracket;
6. Meet the salt spray test / attached self-force test and other related reliability tests, and the customer has provided the standard according to the customer standard;
If it is not provided according to our internal RX-WI-QAC-014 reliability test standard, All materials are in line with our RX-WI-QAC-008 Product Environmental Substance Management Restricted Substances Management Standard;
7. The packaging is packed in accordance with the packaging requirements provided by Ruixiang Engineering Department. Model Customer part number Bullet foot punching convex hull, In the process of pressing down on the foot, Cannot be stuck on the bracket C IS0087201353 PA30 Design Luo Xiulan Date 2020.02.22 4 3 2 1 WIFI antenna shrapnel Main antenna shrapnel Diversity antenna shrapnel bracket Stainless steel SUS304 3/4H T=0.15 M04710104990001 M04710104190001 M04710104590001 M04710103110001 ABS+PC+A0 grade fireproof material black Stainless steel SUS304 3/4H T=0.15 Stainless steel SUS304 3/4H T=0.15 1 1 1 1 Part No Version Proportion serial number Name Part No Description Dosage unit 1 2 3 4 Name Main, sub and WIFI three-in-one line F04710110J10001 R F Audit Li Wei Chen Zijun Date Date 2020.02.22 2020.02.22 D V04 FIT mm 5 frame A4 third angle INNOWAVE Kunshan Innowave information communication technology co. LTD 6 7 8 1 Electrical performance 1-1 Specification PA30BV2 LTE Resonance occurs at 750-790,1710-1760hmz in the antenna operating frequency band 1-2 Matching circuit of antenn a The matching circuit is designed to match the motherboard and the antenna, so that the mobile phone achieves the best radio frequency performance in the operating frequency band. Element E1 E2 E3 Value 5.6nH 0 NC 2 Return loss test 2-1 Setup for the test Return loss procedure: E5071B network analyzer 50 coaxial cable 170mm long copper pipe test fixture. Test fixture processing: The PCB antenna 50 test point uses a hard cable to lead the SMA-J connector, connects to the copper pipe with a choke ring, and then connects to the other devices in turn. 2-2 Testing the Return loss ratio The following table shows the return loss value of the edge frequency point of the operating band of the PA30 ATT antenna. Fre(MHZ) 751 782 1715 2150 Return loss
-6.84dB
-9.87dB
-13.51dB
-2.53dB 2-3 Passive test result 2-4 Active Test Data (free state) PA30BV2 Band Test Channel FS B410M LTE 20000 20175 20350 TRP 19.55 19.7 19.28 TIS
-93.31 B1210M 23230 15.17
-85.33 2-5 antenna Antenna gain LTE:BAND4:1dbm BAND13:-1dbm Antenna typeMetal antenna