FCC ID: ZKQ-PMAX Tracker

CDMA/GPS Tracker Prime One X User Manual Revision: 1.00 Document Title Version Finale Date Status Document Control ID Prime One X User manual 1.00 2016-03-22 Released TRACKER Prime One X 1 Contents 1 Introduction......................................................................................................................................3 2 Product Overview............................................................................................................................ 3 2.1 Appearance............................................................................................................................3 2.2 Buttons/12PIN Interface Description................................................................................... 3 2.3 LED Description................................................................................................................... 4 3 Getting Started................................................................................................................................. 5 3.1 Parts List................................................................................................................................5 3.2 Battery Charging...................................................................................................................6 3.3 Prime One X Data Cable.......................................................................................................6 3.4 Power on/Power off.............................................................................................................. 6 3.5 Insert SIM Card.....................................................................................................................7 3.6 How GPS position Fix.......................................................................................................... 7 4 Trouble shooting and Safety info.....................................................................................................8 4.1 Trouble shooting................................................................................................................... 8 4.2 Safety info.............................................................................................................................8 2 1 Introduction Prime One X is a powerful GPS locator which is designed for vehicle, human, pets and assets tracking , including emergency call function meanwhile(e.g. a wearable product). With superior receiving sensitivity, fast CDMA frequencies 850/1900. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime One X can communicate with the backend server through CDMA network, and transfer reports of emergency, Geo-fencing, device status and scheduled GPS position etc Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol. 2 Product Overview 2.1 Appearance Figure 2-1 2.2 Buttons/12PIN Interface Description Button /12PIN Interface Description KEY/interface Power Button Description Power on Prime One X Power off Prime One X (If power key is enabled) 3 Function Button 12PIN interface(USB port) Reset Button Geo-Fence mode Long press the key to enable/disable Geo-Fence ID0 Geo-Fence in current position mode Long press the key to enable/disable Geo-Fence ID0. If enable Geo-Fence ID0, using the current position as the centre of Geo-Fence 0. SOS mode (default) Long press the key to active SOS alarm Connect a 5V DC adapter can power on Prime One X and charge the internal battery Connect a 3.7V Li-ion or Li-Polymer battery can power on Prime One X Backend server developer or administrator can use the data cable to configure Prime One X (by RD or engineer not by end user). Click the key will turn off internal VBAT when OS is abnormal, and then press Power Key to restart Prime One X. 2.3 LED Description There are four LED lights in Prime One X device, the description as following. Figure 2-2 Light GPS LED CDMA LED(3G) WIFI LED Power LED Event GPS fixed GPS has been turned off Power on and normal Power off WIFI on WIFI off Power on and normal Fully charged In charging 4 State Fast flash Dark Slow flash Dark Slow flash Dark Dark Solid Slow flash Figure 2-3 3 Getting Started 3.1 Parts List Name Prime One X Locater Picture Remark The CDMA/GPS locator. AC-DC Power Adapter Prime One X Data and charger Cable It is used to charge the internal battery of Prime One X. the data cable which can be used for It firmware upgrading and configuration. It also includes the charger interface on the Prime One X (by RD or engineer not by end user).. 5 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. Please connect AC-DC power adapter with Prime One X device. Insert the AC-DC power adapter into the power socket. During the charging process, the Power LED light will solid. When the battery is fully charged, the Power LED light will be Ever-light. You can also charge the battery using charging cable which connects Prime One X device with the Adapter. Charging will last about 5 hours. Note: If the Prine One X device is firstly used, please make sure the battery is fully charged, which will make the life of battery much longer. 3.3 Prime One X Data Cable Prime One X Data Cable is a cable with a 12PIN connector. The data cable is used for data download, which will be used for firmware update or configuration and can be used for charging at the same time

(by RD or engineer not by end user). Figure 3-1 3.4 Power on/Power off Figure 3-2 Power on:

Press the Power Button at least 3 seconds and release it to power on Prime One X device. Note that, the Power LED light will fast flash. 6 Power off:

Press the power button about 3 seconds; Power LED light will fast flash and then turn off, which indicates that Prime One X device has been powered off. Note: the user can not power off Prime One X if the power key is disabled by protocol. 3.5 Insert SIM Card 3.6 How GPS position Fix Figure 3-3 Figure 3-4 7 4 Trouble shooting and Safety info 4.1 Trouble shooting Trouble Messages cant be reported to the backend server by Mobile network. Unable to power off Prime One X. Battery can not be charged Prime One X cant fix GPS successfully. Possible Reason APN is wrong. Some APN can not visit the internet directly. The IP address or port of the backend server is wrong. The function of power key was disabled by AT+GTFKS. The battery has not been used for too long time and has been locked. The GPS signal is weak. Solution Ask the network operator for the right APN. Make sure the IP address for the backend server is an identified address in the internet. Enable the function of power key by AT+GTFKS. Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help. Please move Prime One X to a place with open sky. It is better to let the top surface face to the sky. (The same surface with indication LED) 4.2 Safety info The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use Prime One X on the airplane or near medical equipment. FCC Caution. 15.19 Labelling requirements. 8 This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information:

This mobile phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the handset kept 0.5cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0.5cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0.5cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. 9 10

Test Report Page Annex B.ii. Photograph: EUT Internal Photo 16050010-FCC-R 34 of 41 Cover Off - Top View 1 Cover Off - Top View 2 Cover Off - Top View 3 Battery - Front View Battery - Rear View Mainbard with Shielding - Front View Test Report Page 16050010-FCC-R 35 of 41 Mainbard with Shielding - Rear View Mainboard without shielding - Front View Mainbard without Shielding - Rear View CDMA - Antenna View

Test Report Page 16050010-FCC-R 32 of 41 Annex B. EUT And Test Setup Photographs Annex B.i. Photograph: EUT External Photo Whole Package - Top View Adapter - Front View EUT - Front View EUT - Rear View Test Report Page 16050010-FCC-R 33 of 41 EUT - Top View EUT - Bottom View EUT - Left View EUT - Right View

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: TCB@siemic.com Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (current) Revision History From To 1.0 1.0 2.0 1.0 3.0 2.0 3.0 4.0 5.0 4.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2Rev 5.0 Micron Electronics LLC. To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Micron Electronics LLC.hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s):

Product description:Tracker Model name:Prime mPERs X FCC ID: ZKQ-PMAX Sincerely, Clients signature :

Clients name & title : Ping Cheng/ Director Contact information / address:1001 Yamato Road, Suite 400, Boca Raton, FL 33431, USA SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2Rev 5.0

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: TCB@siemic.com Confidentiality Request Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text Added IC confidentiality letter form Corrections to STC form. Added reference box (obsolete)

(obsolete) to KDB (current) Revision History To From 1.0 1.0 2.0 1.0 2.0 3.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 3.0 4.0 4.0 5.0 March-26-2015 Nov 19 2015 SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 5.0 2016-03-14 Micron Electronics LLC. To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: ZKQ-PMAX Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:

- Block Diagram

-

Schematics

- Operational Description

- Tune up Procedure

-

BOM The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature :

Clients name & title : Ping Cheng/ Director Contact information / address:1001 Yamato Road, Suite 400, Boca Raton, FL 33431, USA SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 5.0