|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8 9
|
Effective |
2024-03-21
|
|
1 2 3 4 5 6 7 8 9
|
2024-02-23
|
|
1 2 3 4 5 6 7 8 9
|
Applicant's complete, legal business name |
Microsoft Corporation
|
|
1 2 3 4 5 6 7 8 9
|
FCC Registration Number (FRN) |
0006275291
|
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
One Microsoft Way
|
|
1 2 3 4 5 6 7 8 9
|
Redmond, WA
|
|
1 2 3 4 5 6 7 8 9
|
Redmond, Washington 98052-6399
|
|
1 2 3 4 5 6 7 8 9
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8 9
|
TCB Application Email Address |
L******@ul.com
|
|
1 2 3 4 5 6 7 8 9
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5 6 7 8 9
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8 9
|
Grantee Code |
C3K
|
|
1 2 3 4 5 6 7 8 9
|
Equipment Product Code |
2033
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8 9
|
Name |
H**** S****
|
|
1 2 3 4 5 6 7 8 9
|
Title |
SR. DIR EMC/SI&RF COMPLIANCE
|
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
+1(42********
|
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
+1(42********
|
|
1 2 3 4 5 6 7 8 9
|
E-mail |
H******@microsoft.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
UL Verification Services Inc.
|
|
1 2 3 4 5 6 7 8 9
|
Name |
G****** R********
|
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
47173 Benicia Street
|
|
1 2 3 4 5 6 7 8 9
|
Fremont
|
|
1 2 3 4 5 6 7 8 9
|
United States
|
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
51077********
|
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
510-6********
|
|
1 2 3 4 5 6 7 8 9
|
E-mail |
g******@ul.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 9 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 9 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 9 | No |
| 1 2 3 4 5 6 7 8 9 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/17/2024 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 9 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 9 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 8 9 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 7 8 9 | 6XD - 15E 6 GHz Low Power Indoor Client |
| 1 2 3 4 5 6 7 8 9 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 8 9 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 6 7 8 9 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Computing Device |
| 1 2 3 4 5 6 7 8 9 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 4 5 6 7 8 9 | Modular Equipment Type | Does not apply |
| 1 2 3 4 5 6 7 8 9 | Single Modular Approval |
| 1 2 3 4 5 6 7 8 9 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 4 5 6 7 8 9 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX211D2H Grant Date: 01/29/2024 |
| 1 2 3 4 5 6 7 8 9 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 8 9 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 9 | Grant Comments | C2PC to allow installation into portable host model number 2033.
The highest reported SAR values for body and simultaneous exposure conditions are 1.19 W/Kg and 1.28 W/Kg respectively.
Output power listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antennas tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. his filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
This module is approved in mobile configurations with Intel antenna reference Antenna, Type PIFA at 20cm minimum test separation distance. |
| 1 2 3 4 5 6 7 8 9 | C2PC to allow installation into portable host model number 2033.
The highest reported SAR values for body and simultaneous exposure conditions are 0.79 W/Kg and 1.49 W/Kg respectively.
Modular Approval. Output power listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only.
The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antennas tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application.
This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
This module is approved in mobile configurations with Intel antenna reference Antenna, Type PIFA at 20cm minimum test separation distance. |
| 1 2 3 4 5 6 7 8 9 | C2PC to allow installation into portable host model number 2033 with a lower gain antenna in 6GHz band. RF exposure and contention-based protocol assessments have been performed.
The highest reported SAR values for body and simultaneous exposure conditions are <0.1 W/Kg and 1.49 W/Kg respectively.
Output power listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
This module is approved in mobile configurations with Intel antenna reference Antenna, Type PIFA at 20cm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| 1 2 3 4 5 6 7 8 9 | C2PC to allow installation into portable host model number 2033.
The highest reported SAR values for body and simultaneous exposure conditions are <0.1 W/Kg and 1.28 W/Kg respectively.
Output power listed is conducted. Modular Approval.
The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. |
| 1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. his filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
This module is approved in mobile configurations with Intel antenna reference Antenna, Type PIFA at 20cm minimum test separation distance. |
| 1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. |
| 1 2 3 4 5 6 7 8 9 | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
This module is approved in mobile configurations with Intel antenna reference Antenna, Type PIFA at 20cm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| 1 2 3 4 5 6 7 8 9 | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
This module is approved in mobile configurations with Intel antenna reference Antenna, Type PIFA at 20cm minimum test separation distance. |
| 1 2 3 4 5 6 7 8 9 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 9 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
SPORTON International Inc.
|
|
1 2 3 4 5 6 7 8 9
|
Sporton International Inc. Hsinhua Laboratory
|
|
1 2 3 4 5 6 7 8 9
|
UL Verification Services Inc.
|
|
1 2 3 4 5 6 7 8 9
|
Name |
A****** C****
|
|
1 2 3 4 5 6 7 8 9
|
E**** T******
|
|
1 2 3 4 5 6 7 8 9
|
J****** K****
|
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
886-3******** Extension:
|
|
1 2 3 4 5 6 7 8 9
|
+886-******** Extension:
|
|
1 2 3 4 5 6 7 8 9
|
510 3********
|
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
+886-********
|
|
1 2 3 4 5 6 7 8 9
|
E-mail |
a******@sporton.com.tw
|
|
1 2 3 4 5 6 7 8 9
|
e******@sporton.com.tw
|
|
1 2 3 4 5 6 7 8 9
|
j******@ul.com
|
|