FCC ID: GMLNHA-9

 

Nokia 282 User Guide Draft 1.1 - 24th April 1998

~w and A scroll keys Scrolis through menu :

functions and Phane Book Adjusts earpiece volume during a catl Press and hold for continuous scrolling Retractable antenna

{not visible}

Extend fully during calls LED indicator Flashes (faster rate] to show incoming cal alerting Flashes (slower rate] to indicate that phone 15 in service CLR key Erases Characters or clears display, Backsteps one menu level OK key Confirms and selects choices on display. Fonds a Phone Back entry by name Reybine @) Profiles key Selects a profile igroup of preset sound settings: t0 Sut your environment During a call provides easy access adusiment of earpiece volume MENU key Enters the menu number en the display Answers a all a END key When mn call, &

09, the call Whee nein keys call, exits the cr Phone Bock fearure. Along press actwates Keyg

(press MENU %

deacwvate) Used to enter numbers ard chara 13 PWR (power) key Atong press turns your phone oa or eff

# key Along press $

ine Life Timer Quick guide to functions Answer a cali - Press SEND or any key except END or PWR, or open the cover Clear a digit from the display, when editing -

Press CLR Clear the entire display, when editing - Press and hold CLR. Emergency 9 call - Press and hold 9 for about two seconds (Emergency 9 Dialing must be set to oni) End a call - Press END, or close the cover Keyguard activate - Press and hold END until you see KEVYGUARD ACTIVE, or press MENU **

Keyguard deactivate - Press MENU *

Last 15 dialed numbers - With clear idle display. press SEND then Ww. Press SEND again to dial displayed number. Last number redial - With clear idle display, press SEND SEND Make a call - Enter area code [if required) and phone number, then press SEND. One-touch dial - Press and hold a key, 1 through 8, for about two seconds (One-touch dialing must be set to onl). PINCALL activate - Enter % # PINCALL #, then PIN code. then press OK PINCALL deactivate - Enter >* # PINCALL # then press OK. Profile - To change the profile. press 4) repeatedly to reach the profile you want, then press OK. Refer to

"Selecting the Profile on page 178 in the user guide Quick Find - With a clear idle display press OK. Enter the first letter(s) of the name, then press OK. Quick Save - Enter the area code [if needed) and phone number, then press OK. Enter the name, then press OK twice to store in first empty focation Scroll Phone Book entries - With clear idle display. press W or A (repeatedly) Speed dial - Enter the location number (1-75} then press SEND Stop incoming-call ringing - Give END or PWR a short press while ringing Switch on/off - Give PWR a tong press Volume adjust - During a call, give 4) a short press to increase, or a long press to decrease (or press W oF A) Quick guide to the menu Enter menu - Press MENU Backstep one level --Press CLR Exit menu - Give CLR a long press, or press END. Scroll through menu - Press MENU then Ww or A. Select a submenu or option - Press OK. Shortcuts - Press MENU, then enter menu number Menu summary 1 Phone Book 1) Find Entry Save Entry Edit Entry Phone Book Status VIP Entry 2 Calllog 1 Diaied Calls 2 Received Calls 3 Missed Calls 4 Erase all Recent Calls 5S Call Timers 3 Phone Settings Ringing Options Ringing Volume Ringing Tone Keypad Tones Lights 1-touch Dialing Emergency 9 dialing Language Phone Number 10 Automatic Answer 11 Automatic Redial 12 Active Open 13 Roam Beep 14 Welcome Note OUNOAwWN 2 3 4 Erase from Phone Book 5 6 4 Security Settings 1 Change Lock Code 2 Change Security Code 3 Restore Factory Set-

tings 5 Call Settings 1 Calling Card 2 Calling Options 6 Lock Phone Prevents outgoing cails and access to all phone functions 7 Messages*

1 Read Messages 2 Erase Messages 3 Message Alert Tone In Cait Menu Only available during calls. Give MENU a short press to access the options MUTE and SEND OTMF The Messages menu is available on Nakia 282N only, Access to the Messages feature depends on network and subscription. Note: To exit a menu or Phone Book feature, and get a clear display, press END at arty time except during a call

{unless you want to hang up}

Contents 1 For Your Safety ...----+-

FCC/industry Canada Notice Using this Guide 2 Quick Start .-

Making your first call... 6... +0005 Changing the Profile (sound settings) . Changing earpiece volume Using the cover to answer and end calls Quick Save (saving Phone Book entries) .... Quick Find (finding Phone Book entries) Reverting to the clear idle display 3 Display Indicators 4 Fitting and charging the Battery -. Fitting the Battery Charging the Battery -

Removing the Battery . Important Battery information 5 The Basics ..----++-+-7 Switching the Phone on and off... Welcome note Selecting a network Making a call Ending a call se Answering a call. - . Adjusting the earpiece volume Last number redial Speed dialing 1-touch dialing Emergency 9 dialing -

Keyguard Selecting the Profile Calling card calls PIN calls Voice and text messages

6 The Phone Book ...-.--+-+-077 23 Saving entries .....- ee nee 2.23 Finding entrics .... Levee 227 Using the Notepad memory vee voce 2B Moving anentry....-.-- vee eee ee 29 Erasing anentry ... sone cece 28 Editing anentry .. ccc e verte terse eres 29 Using the VIP feature bees vce 29 7 Menu features ...------srctt? 31 Accessing the menus . pence eee BT Menu summary ...-. ++ ove eens 33 Phone Book (Menu 1) . Crete BS Cali Log (Menu 2) 2... - 22-22 e re Loe ...37 Phone Settings (Menu 3) ....-- Lecce 4) Security Settings (Menu 4) . - ee 2. AD Call Settings (Menu Byes Leena 2.07 Lock Phone (Menu 6) Docc t etree . 58 Messages (Menu 7)... - bebe eee teee 59 8 Data and Touch Tones ..-.---- 63 Data Mode .....-- . Deve eee Lee 63 Sending touch tones .....- sees 1. 64 Using the Flash function .... ice ee 86

@ Network Services ... ----+-7:7 67 Availability of network services -..-. 00+ 67 Calling Line Identification toe cee BF Call Waiting... cee woe 68 Message Waiting (Voicemail) . ween ee BD Digital Message Service (Nokia 282N onty) vee 10 10 Accessories .---- +e rrr 73 11 Reference Information ..----- 78 12 Troubleshooting .-------7:7 83 43 Technical Information ...---- 84 14 Warranty ..---- eee 85 15 Index ..-.-- eee rrr ttt 88 ti) 1. For Your Safety Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal For more detailed safety information, see important Safety information" on page 78. Road Safety Comes First Dont use a hand-held phone while driving;

park the vehicle first Switch Off In Hospitals Follow any regulations or rules. Switch phone off near medical equipment Switch Off On Aircraft Wireless phones can cause interference. Using them on aircratt ts illegal. Switch Off When Refueling Dont use phone at a refueling point. Dont use near fuel or chemicals Switch Off Near Blasting Dant use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules. Interference All wireless phones may get interference which could affect performance Use Sensibly Use only in the normal position (to ear) Dont touch the antenna unnecessarily Qualified Service Only qualified service personnel must install or repair equipment Accessories and Batteries Use only approved accessories and batter-

ies. Do not connect incompatible products For Your Safety EXCERPT FROM USER GUIDE FCC/Industry Canada Notice Your phone may cause TV or radio interference (e.g when using a telephone in close proximity to receiving equipment). The FCC/industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, con-

tact your local service facility. This device complies with part 15 of the FCC rules Operation is subject to the condition that this device does not cause harmful interference. Using this Guide The wireless phone described in this guide is approved for use in AMPS and NAMPS networks A number of features included in this guide are called Network Services. They are special services provided by wireless service providers. Before you can take advantage of any of these Network Services, you must subscribe to the service(s} from your home serv-

ice provider and obtain instructions for their use For Your Safety 2. Quick Start Making your first call 1 Install and charge the battery (refer to Fitting and charging the Battery on page 7) 2 Give PWR a long press to switch on your phone. Wait for the signal indication to appear 3. Enter the area code (if needed) and the phone number, then press SEND 4 To end the call, press END. Note: If you make a mistake when entering the phone number, to clear the last digit give CLR a short press, or to clear the entire number, give CLR a long press. Changing the Profile (sound settings) You can easily change the profile - which is a set of predefined sound and alert settings - to suit your sur-

roundings. (This is simpler and quicker than changing these sound settings using the menu.)

+ Press 4} (Profile) key repeatedly until the profile you want is next to the pointer, then press OK. Note: You cannot change profile when in a call, Changing earpiece volume

* When in cail, to increase volume. give 4)) a short press, or to decrease volume give 4}) a long press

(the easy access method). Alternatively, press the Ww or A keys Using the cover to answer and end calls

* When the phone is alerting, you can answer calls by opening the cover (if the Active Open menu fea-

ture 1s set to On: refer to Active Open (Menu 3 42)" on page 48) Quick Start

* You can end a call by closing the cover. Quick Save (saving Phone Book entries) 1 With a clear idle display, enter the area code (if needed) then the phone number, then press OK. 2 Atthe Hamme: prompt. enter the name then press OK twice, to store in the first empty Phone Book location. Note: Its better to use short names (ie, no more than 10 characters}, as these can be viewed at a glance -

entries with short names and numbers can be displayed on a single screen when scrolling the Phone Book. For further details, refer to The Phone Book on page 23 Quick Find (finding Phone Book entries) 1 With an clear idie display, press OK. 2 Atthe Find Name: prompt. enter the first letter(s) of the name then press OK. Reverting to the clear idle display When in a menu, scrolling Phone Book entries, or with entered digits or characters displayed, you may want to revert to the Clear idle display. To do this

* Give END a (short) press, or CLR a tong press.

(Don't press END to revert to idle when ina call, as the call will be ended.) Status indicators such as Silent, KEYGURRD RACTIVE, or ROAMING may appear on a clear idle display Quick Start 3. Display Indicators AB BEY a

<~ @ Q

1807 MGOSIBS |

nad 4 Shows which type of system your phone will use when it is roaming (see also the table "System se-

lection and display indications on page 57). Your phone is using the Home system {see also the table System selection and display indications on page 57) You have an active call. You can enter letters or view names. You have one or more voice messages waiting You have one or more text messages waiting. Blinks when Messages list (memory) is full. Indicates menu, or Phone Book location number, of number of unread voice messages and bar indicate the cellular signal strength at the location where you are using your phone and bar indicate the battery charge level. When the battery is fully charged. the whole bar is displayed. Points to an item which may be selected (scroll to choose another item) - press OK to select. Indicates overflowing menu items or Phone Book entries (scroll to view the next or previous screen) Display Indicators Signal strength indication A cellular phone sends and receives radio signals. As with all radio equipment, the quality of radio reception depends on the strength of the radio signal in the area where you are operating your phone. The strength of the cellular signalis shown = -

by the vertical bar on the left-hand side of AB the display. The higher the bar, the stronger the signal at your present location, and the more likely you are to get good call quality Ly When HO SERWICE is displayed, the phone is either outside of the cellular service area or restricted from entering service, and calls cannot be made or received If the signal is poor and you are using the phone in a building. you may get better reception near a window IMPORTANT! The phane can make and receive calls only when:

Itis switched on, and It is located in the cellular service area, and the radio signal strength is adequate Display Indicators 4. Fitting and charging the Battery Your phone is powered by a rechargeable Lithium-ion battery. Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. See Impor-

tant Battery information on page 10 NB: A new battery must be charged before use. Fitting the Battery 1 Slide off the battery cover 2 Fit the battery in the recess - the battery contacts must align with the contacts in the phone 3 Locate the battery cover in the guides on the phone, then skde it into position 7 Fitting and charging the Battery Charging the Battery 4 Connect the lead from the charger to the bottom of your phone, or place the phone in the Desktop Charging Stand (optional accessory). 2 Plug the charger into a standard wall outlet. When charging starts, the seg-

ments of the battery indicator will scroll and the phone beeps once.

o

ee aoe ll

ql

) After the segments of the battery indicator stop scrolling and all segments are dis-

played, the battery is fully charged 1 Charging times. specifed below, depend |

o on the charger used. 3 Disconnect the charger from the power outlet and phone You can use the phone during charging, but charging will be reduced for the duration of the cait. Note: Ina call, charging will stop completely if you are using the Travel Charger (ACP-7) If the battery is too hot or cold, the charging may be interrupted until the battery reaches its normal operat-

ing temperature 8 Fitting and charging the Battery Charging times The battery charging times shown in the following table are approximate Travel Charger ACP-7 Rapid Travel Charger ACP-9 Rapid Cig. Lighter Charger LCH-9 Talk and Standby times Battery operation times depend greatly on how you use the phone, a5 well as on the coverage of the net-

work and network parameters set by the wireless service provider. Typical times are shown in the table. Talk Time Standby time 95 minutes 24 hours Battery Low warning You get this message and a AB warning tone when the battery BATTERY charge is low and only a few min- | [ Low utes of talk time remain | !

iy . o The repetition rate of the battery-

low warnings depends on the remaining battery capacity and the battery condition Note: if you have selected the Silent profile, you won't hear any warning tones. (See Selecting the Profile on page 78. }

When the battery charge is too low for the phone to work, the phone displays RECHARGE BATTERY, then beeps, then shuts itself off Charge the battery as described earlier in this section. 9 Fitting and charging the Battery Removing the Battery Note: Switch off the phone's power before removing the battery!

1 Slide off the battery cover 2 Lift the battery out Important Battery information

- Use only batteries and chargers approved by the phone manufacturer (use only Nokia Genuine Accessories). When a charger is not in use, disconnect it from the power source. Do not leave the battery con-

nected to a charger for longer than a week, since overcharging may shorten its life. it left unused, a fully charged battery may lose some if its charge over time. Never use any charger or battery that is damaged of worn Out Use the battery only for its intended purpose Do not short circuit the battery. Accidental short circuiting can occur when a metallic object (e.g coin, clip or pen) causes direct connection of the 10 Fitting and charging the Battery

+ and - terminals of the battery (metal suips on the side of the battery), for example, when you carry @

spare battery in your pocket or purse. Short circuiting the terminals may damage the battery or the connecting object Leaving the battery in hot or cold places. such as ina closed car in summer or winter conditions, reduces the capacity and lifetime of the battery. Always try to keep the battery between 41 F and 95 F (5 T and 35 C). A phone with a hot or cold battery may temporarily not work, even if the bat-

tery is fully charged, or it may temporarily not charge. Li-ion battery performance Is particularly hmited in temperatures below 14 F (-10 T) Temperature extremes affect the ability of your battery to charge: allow it to cool down of warm up first When the battery is not in use, store It uncharged in a cool, dark and dry place

- The battery is a sealed unit with no serviceable parts. Do not attempt to open the case. The battery can be charged and discharged hun-

dreds of times but will eventually wear out When the operating time is shorter than normal, itis time to buy a new battery Do not dispose of a battery in a fire!

Dispose of used batteries in accordance with local regulations. Recycle!

OY Lithium-ion batteries must be

&Y recycled or disposed of properly. They must not be disposed of in Li-ton municipal waste. 11 Fitting and charging the Battery 5. The Basics Switching the Phone on and off

= Give the PWR key a long press {for about one sec-

ond) if the display shows LOCKED, press MENU and enter your 4-digit lock code. NORMAL POSITION: Hold the phone as you would any other telephone, with the antenna pointed up and over your shoulder. TIPS ON EFFICIENT OPERATION. Extend your antenna fully when in calls. As with any other radio transmitting device, avoid unnecessary contact with the antenna when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise nceded. WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger. Welcome note You can program your own welcome note which is displayed when you switch your phone on {Your dealer may have entered the present welcome note;

eg. the dealer's name.) You can change the wel-

come note - refer to Welcome Note (Menu 3 14)" on page 49. If there is no welcome note programmed, then your phone number will be displayed instead. Note: The welcome note is specific to your currently selected phone number. Selecting a network Your phone operates on specific networks and some-

times it must choose which system to use. This can happen. for example, if you are roaming (Le. you leave 12 The Basics the area where you have signed up for service) If you want your phone to work only in certain types of networks (for example, to take advantage of certain billing agreements between systems), you can specify this using "Carrier Selection (Menu 521). See page 54 Making a call 4 Extend the phone's antenna fully 2 Enter the area code (if needed) and the phone number, then press SEND. !f you make a mistake, press CLR to erase digits one by one. Press and hold CLR to clear the whole display A phone symbol appears on ar the display. The call is con- CALL {

nected when the phone [ \ |

i number disappears from the 1 H display and CALL appears. wo For international calls: You can enter a + at the beginning of a number by pressing 2k. Then enter the country code and number, then press SEND. The

+ expands to the international dialing code prefix. To dial a number stored in the Phone Book With a clear display press W or A until the Phone Book entry is displayed, then press SEND To make an emergency call. Refer to page Emer-

gency Calls on page 80. HO RICE appears and the phone beeps if you try to make a call when your phone is outside the cel-

lular service area CALL HOT GLLOMED appears if you try to make a call that is restricted (sec "Allowed Calls (Menu 522)"

on page 57}, of the phone Is locked If you receive a call when you're trying to make a call, the incoming call comes through and the outgoing call is cancelled 13 The Basics Ending a call

+ Press END, or

+ Close the cover, or

+ (fusing the headset, press the headset button. Note: if you give END a jong press, you'll activate Keyquard (see "Keyguard on page 17). Answering a cail

* Press SEND, or any key except END or PWR, or

+ Open the cover (the Active Open menu must be set to On). If Active Open is set to On, and you get a call with Calling Line Identification (see page 67) which causes the name or number to be displayed. the name or number will be retained on the display bnefly before the CALL notification appears. This allows you to see who is calling To answer a waiting call (normally indicated by a beep): Press SEND. (Note that Call Waiting is a net-

work feature. You need to subscribe to it through your service provider ) To stop the ringing without answering the call, you can press END, or if the cover is closed you can press PWR briefly Make sure the antenna is fully extended during the call Note: if Keyguard is active, a call can only be answered by pressing SEND 14 The Basics When there is an incoming call, the phone rings and the vibra | CALL activates (if set), GALL flasheson | [ |

the display and the LED indicator |, a flashes If you have selected the Sitent profile (see Selecting the Profile on page 18), there are no audible alert tones You can answer a call any time. even while using Key-

guard, Phone Book or menu functions If you dont answer a call, the message 1 MISSED CALLorh? MISSEG CALLS appears on the dis-

play and remains until you press any key (except the PWR key) to clear the display. or you can press OK,

~ or A to view the Missed Calls List. The phone automatically stores the caller's number (if available) in the Missed Cais list (see "Missed Calls (Menu 2 3)"

on page 39). When you scroll the list, you first see 4 message telling you the number of new numbers (eg, nh HEM! HUMBER(S), or HO Eb) NUMBERS: wait for most recent number to appear or press . Press

~w or A to scrall the list Calling Line Identification If you are a subscriber to a network which supports Catling Line Identification your phone may display the caller's number or name when the phone rings {if the name and number are stored in the Phone Book). For more details, refer to Availability of network services on page 67 and Calling Line Identification on pace 67 Adjusting the earpiece volume

+ During acall, give ashort ar) press to increase the volume, VOLUME |

or press and hold a) to wanog |

decrease it (the easy access iY |

7 method). Alternatively, press 15 The Basics Ww or A to decrease or increase the volume Last number redial

+ Clear the display. Press SEND [the number will appear) then press SEND again to initate the call Last 15 Dialed Calis

* Clear the display, press SEND, then. Press W of A repeatedly until you see the number you want. Then press SEND to dial it. See Dialed Calls (Menu 2 1)" on page 38 for more information Speed dialing

* Enter the number of the Phone Book location {1-

75) where the phane number is stored, then press SEND If the Phone Book location is empty, the message LOCATION EMPTY appears. 4-touch dialing If 1-Touch Dialing is set to On, you can dial the phone numer stored in any of the Phone Book locations 1-

8 by pressing a single key

+ Press the required number key (1-8) for about two seconds Note: Location 1 is recommended to be used as the Voice Mailbox Number. See *1-Touch Dialing (Menu 3 6) on page 44 Emergency 9 dialing The 9 Key is reserved for an Emergency Number that is programmed into your phone by your dealer Press the 9 key for about 2 seconds Emergency 9 Diating must be set On for this to work!

16 The Basics See "Emergency 9 Dialing (Menu 3 7) on page 45 Note: Official emergency numbers vary by area fe.g.. 917 or another official emergency number). However, only one emergency number is programmed into your phone to be dialed automatically by Emergency 9 Dialing, and this may not be the proper number in all excumstances Note: Emergency 9 Dialing does not operate when Keyguard is activated. However, an emergency call can be made without deactivating Keyguard by entering the whole emergency number programmed into your phone and then pressing SEND. Keyguard

* To activate Keyguard, give END a long press (or press MENU then &)

* To deactivate Keyguard, press MENU then *

Keyguard locks the keypad to help prevent accidental keypresses (e.g. when the phone Is ina pocket or a bag). KEYGUARD ACTIVE remains {or reappears) on the display until any key is pressed or Keyguard is deactivated Answering a Call with Keyguard Active

* Press SEND During the call, the keypad is automatically unlocked and the phone can be used normally. After the call is ended, Keyguard is automatically activated again The phone cannot be switched off when Keyguard is active. However, if the phone is ringing and Keyguard is active, you can give PWR a long press to switch off the phone while it is ringing Note: When Keyguard is activated, calls may be possible to the emergency number programmed into your phone fe.g. 911 of another official emergency number}

However. Emergency 9 Dialing does not operate W7 The Basics Note: Keyguard is not a security feature and will not prevent unauthorized use of your phone. Making an emergency call with keyguard active

+ Enter the emergency number preprogrammed in your phone and press SEND The emergency number is displayed only after you have entered the last digit of the number. Selecting the Profile A profile is a group of preset sound and alert settings. You can quickly select one of five profiles to sult your environment or surroundings Depending on the profile you've selected. the phone then uses specific pre-defined menu settings for Ringing Options, Ringing Volume. Keypad Tones, Message Alert Tone, and Roam Beep, and also sets the microphone sensitivity and earpiece volume to appropriate levels. 1 When the phone is in idle. press 4). The pointer will indicate the profile currently selected 2 Press al) again repeatedly (or use W or A), to move the pointer to the profile which best suits your surroundings (see the following table). Press OK to choose it. 18 The Basics Profile | Where to use Tringing| Vibra Personal | Anywhere you want to use your own | Asset | As set custom settings To view or change] In menu | in menu these settings, use the menu Silent Teuly sient, fof use ina meeting oF None | No other situation where you don't want any ringing, keypad of warning tones. Diserest | Inafarly quet enwronmentwhere | Beep | Ves ringing would cause annoyance Generat | Inmany everyaay stuavons where | Yes} Yes the novse level is quiet to moderate, and where you are not concerned about ringing causing annoyance Loud In noisy environments, suchas ina | Yes Yes tusy street Car ina vehicle his profite 15 selected yes No automatically when the phone is fitted to an Advanced Car Kit) The name of the profile currently (hs selected will be displayed (on the middle line) when the phone ts in | [ L idle. (The profile name may be iy t replaced by a status message Ve such as KEYPAD LOCKED) Note: When in a call, pressing 4) changes the ear-

piece volume, and it s not possible to access the profile options Useful information about the Profile feature

- Settings for all the profiles except Personal are fixed. You can change. or view, the settings for the Personal profile using the menu. (You can't view the settings for the other profiles) If a profile other than Personal is selected, and then you change the menu setting for Ringing Options, Ringing Volume, Keypad Tones. Mes-

sage Alert Tone, or Roam Beep. then the profile wall automatically change to Personal. The set-

tings will then be as previously set for the Per-

19 The Basics sonal profile, except for the one you have changed. The phone will remain set to *Personal until you select a different profile When you select the profile feature, any current menu or Phone Book operation will be exited.

- You can change the earpiece volume when in a cali using the 4), W or A keys. At the end of the call the earpiece volume will revert to the setting for the currently-selected profile, and that profile will remain selected and unaffected If you connect the phone to an Advanced Car Kit, the Car mode is selected automatically, and Car appears in the displayed tist of profiles: When you remove the phone from the Car Kit, the phone will revert to the profile selected before you fitted it to the Car Kit (but, if you changed the profile while it was in the Car Kit, that profile wilt remain selected) If a headset is connected to the phone, then the current profile remains selected, but the micro-

phone and earphone levels are adjusted automati-

cally {and remain selected until the headset is removed). Don't connect a headset when the phone is fitted to the Advanced Car Kit (an error tone will be produced) The Vibra (Ringing Option) will be disabled when the phone is connected to a charger or a car kit Calling card calls If you use the phone's Calling Card storage feature

(see Catling Card (Menu 5 1)" on page 51), you can use the method described below to charge tong dis-

tance charges to a Calling Card. You won't need to enter Calling Card information every tme you want to make a card call Note: No physical credit cards are needed in order to direct the call charges to the credit card: however you must first store and select a Calling Card with Menu 5 1!

20 The Basics To make a calling card call:

1 Enter the phone number of the party to be called 2 Press SEND for 2 seconds. The phone displays CARO CALL (and the card name if entered}, then WAIT FOR TOHE, THEN FRESS OK. 3 When you hear a tone or voice prompt. press OK or SEND. The phone may ask you again to WAIT FOR TONE, THEM FF: OK?

4 If you get another tone or voice prompt. press SEND again The call is then made, and the phone displays CARD CALL and the name of the card (if itis has a name) Itis also possible to make manual card calls by using Touch Tones (DTMF) through your Calling Card Oper-

ator. To do this, see In-Call Menu on page 61, and Sending touch tones" on page 64. You can make calling card calls in conjunction with PIN calls PIN calls PIN Call is a network security feature that requires a PIN Code every time you make a call. You can acti-

vate or deactivate it and specify the numbers in your PIN Code. Please check with your aperator for the availability of PIN Calling in your network Note: If you are using the phone in an area that doesnt require PIN dialing, deactivate PIN Call. Activating PIN call 4 Enter* #7462255 # (spells PINCALL) 2 The phone asks for your four-

digit PIN Code. which is prowded by your network operator. Enter your PIN code and press OK The phone 21 The Basics briefly displays FIN CALL OM. Making PIN Calls 1. Make the call as usual (refer to Making a call on page 13}

The phone displays FIM CALL 2 After you hear a tone, press SEND again The phone displays SENDING FIN ... Ifthe message remains on the display, press SEND again to resend the PIN code. Wait for your call to be connected Note: if you're in a network that doesnt support PIN Calls, but your phone has PIN Call On, the phone stil tries to send a PIN. Press CLR to end the PIN Call attempt Note: When the phone is settoPIH CALL ON, a call to the emergency number programmed into your phone {e.g., 911 or another official emergency number) will be dialed as a normal call without the PIN code request. Deactivating PIN call Foltow the steps in Activating PIN Call, but dont enter your PIN Code at the prompt just press OK. The phone briefly displays FIM CALL OFF Voice and text messages If you subscribe to voicemail, callers will be able to leave you voice messages which you can recall from your voice mailbox If you have purchased the Nokia 282N and subscribe to a text message network service, Callers may send you short text messages that you can tead on your phone's display For more details, refer to Network Services on page 6?

22 The Basics 6. The Phone Book The Phone Book can store up to 75 phone numbers and names. tt also has a notepad where you can store one additional temporary number and name. The maximum number of Phone Book entries depends on how much information you store in each location. Stored phone numbers can be up to 32 digits long. and stored names can be up to 30 characters long. This section includes details on how you can save, find and move Phone Book entries, and on other Phone Book features. You can also use Menu 1 to find, save, edit, and erase stored Phone Book entries. See Phone Book (Menu 1)" on page 33 Saving entries Quick save 1 With a clear idle display, enter the area code [if needed) and the phone number then press OK. 2 1 Name: and EEG > Bp appear, and you can enter | Save Mamet characters from the keypad [ |

(refer to Entering names on |! {

page 24). Enter the name _-

(optional) then press OK. 3 When SAE IN uae ? (eg. 3')is SAE IM displayed. press OK (or, if you CAT TCIM \

want to save in a different Phone Book focation, enter a location number of your choice then press OK) SAVED will be displayed Unless you enter a different location number of your own choice, the phone stores the number in the first empty Phone Book tocation. The location number is shown in the displays upper right corner. 23 The Phone Book Identical names cannot be stored in the Phone Book If you try to store a name that is already stored, the phone displays SAVE IN LOCATION n? (n being the focation currently containing the matching name) To confirm, press OK. Then, the phone asks if you want ta replace the entry. To do this, at REPLACE?

{followed by the name}, press OK. If you dont want to replace the contents, re-enter the information using a slightly different name, then save again Entering names 1 Whe Mates and the BEd indicator appear, you can enter letters by pressing the keypad keys a certain number of times, as indicated in following table if you keep the name short, then both the name and complete number can be displayed on one screen fie, at a glance) when recailing entries. 2 Youcanuse Ww or A to move the cursor and press CLR to correct any mistakes. To clear the whole display, press and hold CLR 24 The Phone Book Key 1 2 3 4 5

| Press presses presses presses presses 1 1 i 1 1 2 A B C Zz A 3 Go E FE 3 B 4 6 H I 4 G 5 J KE L 5 J 6 M ot 6 6 M 7 P a FE s ?

8 T u uy a T 9 is x 2 3 w Moves the cursor to the next space immediately Adds a space between letters. Entering punctuation marks The 0 key can be used to insert punctuation marks

(and 0'}. Press 0 repeatedly until you get to the punc-

tuation mark you want

~? 1, .2 "7 & $ ) 0 The cursor The cursor appears at the end of an entry for your convenience when entering, editing or erasing an entry. Note from the table above that you can either wait for the timer to move the cursor to the next space of you Can press % to force it to the next space 25 The Phone Book Phone Book location 75 This Is a special Phone Book location. {f you store a number in location 75, you can make calls to that number even if the phone is locked. See Lock Phone

(Menu 6) on page 58. (Lacation 75 may not be avail-

able if there is no space remaining in the Phone Book, such as if other locations contain long names and numbers}

Special characters in stored numbers in stored numbers, you can include a 2.5 second pause (p character), a wait (w' character}, or a link to another Phone Book location ('+' character). This aliaws the automatic sending of Touch Tones. For more information on using these special charac-

ters see "Automatically sending touch tones on page 64

* To enter a Pause (p), press 7B 3 Note that a p appears on the display, but this is dif- [

ferent from just keying in the Y F 6 letter p

+ To enter a Wait (w), press >

+ Toenter a link to another location, press #4. A +

sign will appear on the display. A + in the middle of a string links to another location Note: A + at the beginning of a number is used for international calls. See "Making a call on page 73 for more information Linking two Phone Book locations for long touch-tone strings:

1 Enter the Touch Tone string and store it in the Phone Book. Remember its location number 2 Recall the phone number (assuming its already stored) and remember its location number 26 The Phone Book 3 Press *kk. The + character is displayed after the phone number. 4 Enter the location number (one or two digits) of the Touch Tone string (from Step 1). Store the new contents (phone number, +, and Touch Tone location). When the phone displays SAVE IH LOCATION? enter the location number from Step 2 and press OK. For details on sending Touch Tones, see Sending touch tones on page 64. Making a call using the two joined locations:

1 Recalt the first location and press SEND. This dials the phone number, but the dialing stops at the +'

character, 2 When the call is established, press MENU SEND The phone will autornatically send the Touch Tone string in the second location (which is displayed) Finding entries You can recall an entry by searching for a particular name, by specifying a particular location number, or by simply scrolling all the entries. If the entry is shart, then the we name and complete phone UCHH number may be shown on a sin- [ie gle screen !

two or three screens, as indi- ! UATE i cated by the down ( v ) or up (+) [iste overflow indicators - when you 7 OFFICE 1 see these. press W or A to view a the other part of the entry Longer entries may be shown on 97 27 The Phone Book Note: Scrolling upwards is faster

# you have entries shown on (-

Y more than one display - you will jump from the first display of one entry to the first display of the Ce previous entry. With (any part of} the entry displayed, to make a call to the number in the entry press SEND Searching for a particular name 1 With a clear idle display, press OK. 2 Find Mame: and By S appear. Enter the first Jetter(s) 1 Find Hanes of the name, then press OK. | [ |

3 The nearest match, ifany, in fy a the Phone Book will be displayed. To scroll other entries, press W or A

(unless in a call) Finding an entry by location number if you know in which Phone Book focation an entry is stored, you can quickly recall it by location number.

+ Enter a one-digit or two-digit number (1-75) then press W or A (to scroll entries in location number order}

For example, to recall the name and number in location 20, enter 20 then press Ww. Scrolling entries

+ With a clear display, press Ww or A repeatedly. Using the Notepad memory Saving an entry in the Notepad Enter the name and number normally, then when SRUE IM LOCATION? is displayed, press #

28 The Phone Book then press OK Viewing the entry in the Notepad With aciear display. press # then ~ to view the number Moving an entry 1 Recall the name and number. Press OK. 2 AtSAVE IM LOCATION? enter the new location number then press OK. The phone will display MOVE?

3 Press OK to move (the phone displays MOWED and the remaining available Phone Book memory), or press CLR to exit without moving Erasing an entry See Erase From Phone Book (Menu 1 4)" on page 36. Editing an entry See Edit Entry (Menu 1 3)" on page 34. Alternatively, you can scroll to an entry then edit tt 1 Froma clear idle display. press W or A to display the entry you want to edit. Press OK. 2 Atthe Edit Name: prompt, editthe name Use the CLR key to erase characters, use or A to move the cursor, and enter new characters as required. Press OK. 3 Atthe Edit Me. ? prompt, edit the number. and press OK 4 ACSAVE TH LOCATION? (you can enter a different location number if you want, then} press OK. If you did not change the name, or the name you have entered matches one already stored, then REPLACE? will be displayed, press OK to 29 The Phone Book replace the contents with the new (edited) name and number. Using the VIP feature This feature lets you personalize your phone so that it will ring with a distinctive fanfare tone when you receive a Call from (up to three} specific numbers which you tag as VIP, Using the ViP Entry menu (see VIP Entry (Menu 1 6)"

on page 37), you can tag any Phone Book entry (ie, make ita VIP number}, view the tagged Phone Book entries (ie, see which entries are currently VIP numbers), and untag a Phone Book entry (ic, make it a non-VIP number). The fanfare tone ringing volume will be as set in the menu, or it will increase from Level 1 to Level 5 (with vibra) if you have selected the Discreet profile, or if you have set Ringing Options to Beep Only, Vibra Only or Beep+Vibra. If you have selected Silent pro-

fite, there will be no ringing. (For details on profiles, refer to Selecting the Profile on page 18). For the VIP feature to work each number you want to use as a VIP number must be stored in the Phone Book, and the Phone Book entry must be tagged, and the number must be received from the network via CLI (Calling Line Identification - a network feature to which you must subscribe) When you get a call alert froma 9 VIP number, the display willshow JOE SMITH |

the callers name (or number}, i WIF |

WIP, and CALLIN flashing iM CALLING 4 30 The Phone Book 7. Menu features The phone's menus and submenus give you access to many features, and ways to customize your phone to suit your individual preferences. You can use the menus and submenus either with the Menu then OK Methad or the Shortcut Method. A menu list (Menu Summary) is on page 33 and instructions for using the menus fallow. Accessing the menus MENU then OK method Press MENU to enter the menu Press W of A to scroll through menu choices Press OK to choose a menu bh wNnN =

if there are submenus: press W or A to scroll through the submenu choices. Press OK to enter a submenu 5 The current setting is displayed. Press W or A to scroll through the other choices. Press OK to select one, or press END to exit the menus without changing anything Some menus require you to enter your lock code or security code. To backstep a menu level at a time, press CLR. To exit the Menu, press END or give CLR a fong press. Shortcut method The menus and submenus are numbered, So you can access them by their number:

1 Press MENU to enter the menu, then press the number(s) of the menu you want within 4 seconds For example, for Phone Settings press 3, or for Keypad Tones (within Phone Settings) press 34 31 Menu features The current setting (if applicable) is displayed. The menu (or submenu} number is shown in the top right-hand corner of the display 2 Pressw or A to scroll through other settings Press OK to select a setting or press CLR to exit the menus without changing the settings Note: if you use the shortcut method, the display shows a _' (briefly) before the menu or submenu number in the top right-hand corner of the display. Also, if you use the shortcut method to access Menu 3 7, there is a 5-second delay before the menu appears. To bypass this delay, press MENU 3 1 OK OK. Using the menu during a call If you press MENU (short press) during a call, the phone gives you the In-Call Menu (see In-Call Menu on page 61). If you want to access the regular menu. press MENU for a couple of seconds. You can then use the menu features normally 32 Menu features Menu summary 1 Phone Book Find Entry 2 Save Entry 3 Edit Entry 4 Erase from Phone Book 5 5 Phone Book Status MP Entry 2 Calllog 1 Dialed Calls 2 Received Calls 3 Missed Calls 4 Erase ail Recent Cails 5 Call Timers 3 Phone Settings Ringing Options Ringing Volume Ringing Tone Keypad Tones Lights, 1-touch Dialing Emergency 9 dialing Language Phone Number 10 Automatc Answer 11 Automatic Rediat 12 Active Open 13 Roam Beep 14 Welcome Note oornnawn~

In Phone Book (Menu 1) Security Settings 1 Change Lock Code 2 Change Security Code 3 Restore Factory Set-

tings Call Settings 1 Calling Card 2 Calting Options Lock Phone Prevents outgoing calls and access to all phone functions Messages*

1 Read Messages 2 Erase Messages 3 Message Alert Tone Call Menu Only available during calls. Give MENU a short press to access the options MUTE and SEND GTMF.

*The Messages menu is available on Nokia 282N only. Access to the Messages feature depends on network and subscription. To access Menu 17, press MENU then OK. Find Entry (Menu 1 1) 1 Press MENU then OK. 2 You'llsee FIO ENTRY. Press OK again. The phone prampts you to enter a name 3. Enter the first letter(s) of the name then press OK (or w 33 Menu features ot _A to scroll through the stored entries) Alternatively, at the Hane: prompt, just press press Wor A Save Entry (Menu t 2) 1 Press MENU then OK then w to scroll to SAVE EHTRY. Press OK 2 Mametis displayed. Enter the name then press OK 3) Hunker tis displayed. Enter the number then press OK 4 The phone suggests a Cr) location for saving the entry SAVE IK Press OK. or enter another [8 LOCATION |

location number then press 3 OK. The phone displays SAVE and the remaining available memory. Edit Entry (Menu 1 3) 1 Either. Recall the entry from the Phane Book first Or If you want to find the entry using this menu feature, start at Step 2 2 Press MENU then OK then w to scroll to EQIT ENTRY. Press OK. If you've already recalled the entry. go to Step 5 Otherwise go to Step 3 3 > Depending on whether you AB 2 want to find the entry by name Find Name or by location number, press [Fins Loc. |

\w to scrollto Find Nene Y or Find OK 4 Either. If you selected Find Mame then Hane: will be displayed - enter the first letter(s) of the name,

, then press 34 Menu features then press OK. Or. if you selected Firid Loc., then Locatic will be displayed - enter the location number {1-

75) in which the entry is stored (or press W or A to scroll entries), then press OK. Go to Step 6 The entry will be displayed If the compiete entry won't fit 5 on one screen, the down ( ) JAMIE or up { ) overflow indicators WILLIAMS. |

will be displayed (example 1 OFFICE shown}

You can press W or Ato view the other part of the entry If this is the entry you want to edit, press OK, if not, press W or A to scroll to the entry you want to edit, then press OK. Edit Hamme? (see note after Step 8} and the name (if it exists) is displayed. If you want to edit the name, use the CLR key to erase characters, use Ww or A to move the cursor, and enter new characters as required. Press OK Edit Mo. ? (see note after Step 8) and the number ts displayed. If you want to edit the number use the CLR key to erase digits, use W or A to move the cursor, and enter new digits as required. Press OK. ALSAWE IM LOCATIOF a Da

{you can enter a different REPLACE?

focation number if you want, [ |

then) press OK. If you did not it 1 change the name, or the Nees name you have entered matches one already stored, then REPLACE? will be displayed, press OK to replace the contents with the new (edited) 35 Menu features name and number Note: The prompts B3it Mame: andEdit Ho.?

will be omitted if the narne or number occupies more than two lines on the display. Erase From Phone Book (Menu 1 4) Note: Be careful when erasing--it can't be undone!

1 Press MENU then OK then ~ to scroll to ERASE FROM PHONE BOOK. Press OK. 2 Press W to move the pointer to your choice. Press OK to choose it If you choose Erase ALL, the phone asks you to confirm. Press OK when you sce ARE YOL! SUFI to exit without erasing

?, or press CLR Ifyou choose Gre biy ree, the phone displays Er rene. Either enter the first few letters of the name then press ~W. or just press W to scroll through stored entries. When you see the entry you want to erase, press OK, or press CLR if you change your mind and do not want to erase Note: The contents of Phone Book location 7

(normally used to store your voicemail number) cannot be erased using this menu feature. The contents are permanently stored. unless you overwrite them with a new entry. If you want to erase the contents of location 7, save a blank name and number to the location Phone Book Status (Menu 1 5) 1 Press MENU then OK then @. Ss

\ to scrofto PHONE BOCK | Ot op STATUS. Press OK [rene AWATLABLE |

The phone displays the per- \y a centage of memory available _ 36 Menu features CALL LOG: press OK. Dialed Calls (Menu 2 1) The phone automatically stores the last 15 numbers you called of attempted to call. The same phone number isnt stored twice in the list. When you dial a number that already exists in the list, the dialed number is moved to the top The Dialed Calls list remains in the phone's memory when the phone is switched off. If you want to erase i, use Menu 2 4 1 Press MENU W. You'll see CHLL LOG: press OK 2 You'llsee DIALED CALLS cn Press OK again \F DIALED 3 Press W to scroll through the [ CALLS last 15 numbers you have a dialed Each phone number in the list has a number which is shown in the top right corner of the display; .g 2 - L stands for last (dialed) call Press SEND to dial one of the numbers You can also press SEND SEND to dial the last number dialed Received Calls (Menu 2 2) The phone automatically stores the callers numbers of the last 15 calls you received and answered {if the network supports this feature, and the callers num-

bers were received from the network - refer to your service provider for more details). The same phone number isnt stored twice in the list When you dial a number in the Received Calls list it remains in this list, and it is also added to the Dialed Calis ist 38 Menu features The Received Calls list remains in the phones mem-

ory when the phone is switched off. If you want to erase It. use Menu 24 1 Press MENU w. You'lisee CALL LOG: press OK 2 Press w to scroll to 1B ) RECEIVED CALLS. Press RECEIVED OK. [ CALLS |

3 Press w to scroll through the phone numbers of the last 15 received calls

Each phone number in the list has a number which is shown in the top right corner of the display, e.g., 2A - *A stands for answered (received) call Press SEND to dial one of the numbers To store ane of the numbers in the Phone Book, recall the number from the list, then press OK; when SAVE IM LOCATIGN n is displayed, press OK again. Missed Calls (Menu 2 3) The phone automatically stores the callers numbers and names of the last 15 calls you missed (if the net-

work supports this feature, and the callers numbers were received from the network - refer to your service provider for more details). The same phone number isn't stored twice in the list. When you dial a number in the Missed Calls list it is erased from this list, and it is added to the Dialed Calls ist The Missed Calls fist remains in the phone's memory when the phone is switched off. If you want to erase it, use Menu 24 1. Press MENU ~. You'll see CALL LIMG; press OK 39 Menu features 2 Press w to scroll to wo MISSED CALLS. Press OK. [ane |

3 Press w to scroll the phone CALLS numbers of the last 15 missed [7 calls Each phone number in the list has a number which is shown in the top right corner of the display: e.g., 2U' - U stands for unanswered (missed) call. Press SEND to dial one of the numbers; this number will then be erased from the list To stare one of the numbers in the Phone Book, recall the number from the list, then press OK; when SAVE IH LOCATION 'n is displayed. press OK again Erase All Recent Calls (Menu 2 4) Note: This menu erases all numbers in the Dialed Calls, Missed Calls and Receved Calls lists, and cant be undone!

1 Press MENU W. You'll see CALL LONG press OK. 2 Press W to scroll to E! E ALL RECENT CALLS. Press if ERASE ALL OK. [ee RECENT en |

CALLS 3 The phone asks ARE UUt [}o%

SURE?. Press OK to erase, oF press CLR to exit without erasing Call Timers (Menu 2 5) 41 Press MENU W. You'll see CALL LUG: press OK 2 Press*y to scrollto CALL. TIME!

3. Press OK. 3 Press to Scroll through the options. Press OK to choose the one you want, (You'll need your secunty code to clear the timers.) 40 Menu features 1 Press MENU then ~ until you sec FHOWE SETTINGS. Press OK. 2 Press w to scroll to i-

TOUCH OLALING and the current setting. Press OK if you want to change it Fv) 1-TOUCH

[ DIALING |

Gn Y 3 Press Ww to move the pointer. Press OK to chaose On or Off. With 1-Touch Dialing On, you can dial the number stored in any of the locations 7 to 8, by pressing and holding the corresponding number key. If you press and hold 1, the phone dials your voice mailbox number if you have stored it in this location. Note. 1-Touch Dialing does not operate when Keyguard is On, or when 4 call is already established if you press and hold 9, the phone attempts to make a call to the emergency number pre-programmed into your phone if you have Emergency 9 Dialing (Menu 3 7} set to On. Emergency 9 Dialing (Menu 3 7) You may dial the emergency number programmed in your phone by your dealer, by giving the 9 key a long press. only if Menu 3 7 is set to On 1. Press MENU then w until you see FHOWE SETTIHGS. Press OK. 2 Press w to scroll to EMERGENCY 3 OTALING and the current setting. Press OK if you want to change it AB

[ EMERGENCY 9 DIALING \

ony]

6 ew 7 3 Press w to move the pointer Press OK to choose On or Off. Language (Menu 3 8) The menus and messages can be displayed in Eng-

lish, French, Spanish, or Portuguese 45 Menu features 1 Press MENU then until you see FHOHE SETTINGS. Press OK. 2 Press w to scroll to a LAHSURGE and the current LANGUAGE setting. Press OK if you want |

to change it English) 3 Press w to move the pointer to your choice. Press OK to select an option. Phone Number (Menu 3 9) Your phone can have two different telephone num-

bers. This menu lets you choose which telephone number to use. Note: In order to have two different telephone numbers, you must subscribe to them through your cellular operator(s) 1. Press MENU then Ww until you see PHONE BETTINIGS. Press OK. 2 Press to scroll to PHONE @ 9 HUMBER and the current PHONE phone number. Press OK if [ ER | :

you want to change it. 2 3 Press Ww to move the pointer Ce. 2 to the number you want (if porasssizizy}

there are two available) pervs Press OK. r aI Note: If only one phone number is programmed into your phone, you'll only see that number in this menu. The phone can't use both nurnbers at the same time and you cant change the number during a call. if your phone is set to your first number, you can only recewe calls via that number. You may be able to forward calls from your second number to your first number so you dont miss any calls, if this service is 46 Menu features available from your cellular service provider. For more information, please contact your cellular service provider. Automatic Answer (Menu 3 10) Note. This feature applies only if the phone is ina handstree car kit, or a headset is connected. With Automatic Answer set to On, the phone auto-

matically answers after 4 seconds. Note: If using this feature with a headset connected, consider whether you want the phone to always answer Calls automatically. For example, you may not be aware of incoming Calls if you are not wearing the headset. To avoid the possibility of the phone auto-

matically answering calls when you don't want it to, set Automatic Answer to Off 1 Press MENU then ~~ until you see FHONE SETTINGS. Press OK 2 Press to scroll to Cr) AUTOMATIC FNSWER and [ese |

the current setting. Press OK ANSWER if you want to change it. |

3 Press ~ to move the pointer Press OK to choose On or Off On Automatic Redial (Menu 3 11) Sometimes the cellular network is busy and your call cant go through. You get a SYSTEM EI wae message and are asked Co redial. if Automatic Redial is Set to On, the phone automatically tries 3 more times to cannect the call. If the call connects, the phone beeps to notify you 1 Press MENU then W untill you sec FHOHE SETTINGS. Press OK 47 Menu features 2 Press ~ to scroll to 7B it AUTOMATIC REDIAL and AUTOMATIC the current setting. Press OK [ REGIAL | . if you want to change it ! On

, 9) 3 Press Ww to move the pointer. Press OK to choose On or Off. Active Open (Menu 3 12) With Active Open set to On, when an incoming call is alerting, you can answer the call by opening the cover Note: You can end a call by closing the cover, regardless of whether Active Open is set to On or Off. 1 Press MENU then until you see PHONE SETTINGS. Press OK. 2 Press to scroll to (

ACTIVE OPEH and the FF a8 }

PP ACTIVE |

current setting. Press OK if OPEN |

you want to change it on Oo;

3 Press to move the pointer. Press OK to choose On or Off Roam Beep (Menu 3 13) With Roam Beep Set to On, you will hear a beep if the roaming status changes (eg, if the phone roams from the home system to a non-home system). Note: You can adjust this menu feature in the normal way, but it will aiso be adjusted automatically when you select a Profile (refer to Selecting the Profile on page 18) 4 Press MENU then Ww until you see PHOME SETTINGS. Press OK 48 Menu features 2 Press w to scroll to ROAM Oe EEEF and the current setting. | wRroan |

Press OK if you want to [ BEEP | '

changeit. * 1 Onl) 3 Press w to move the pointer. Press OK ta choose On or Off Welcome Note (Menu 3 14) You can create or change the Welcome Note which is displayed each time you switch on the phone. 1 Press MENU then ~w until you sce PHONE SETTINGS. Press OK. 2 Press ~w to scroll to oo WELCOME NOTE. Press OKif | PyeLcone you want to create or change [ NOTE |

it

. ta EEG will be displayed, indicat- (eo om ing that you can enter charac- gy ters from the keypad (for | [ | :

details, refer to Entering { {|

names on page 24). SS 3 Enter the Welcome Note (up to 30 characters}. To correct a mistake (or to erase an existing note). press CLR (which erases the character to the left of the cursor). Press W or A to move the cursor left or right 4 When the note 1s complete, press OK. The message SHUE0 will be displayed If there is already a Welcome Note, and now you dont want one, save a blank screen (your phone number will then be displayed instead when you power on the phone}

Security Settings (Menu 4) This menu lets you change your phone's security and lock codes, which are required for certain functions. 49 Menu features You can also reset the phone's menus to their factory settings Note: You need your, security code to access this menu The default security code is 12345, To access Menu 4, press MENU, then Ww until you see SECURITY SETTINGS. Press OK. The phone asks for your security AB (fe 4]

code. Enter your 5-digit security (curity vl Security code and press OK: io | |

ho ty Change Lock Code (Menu 4 1) The lock code is required when you want to lock your phone. See "Lock Phone (Menu 6) on page 58. Note: The phone's default fock code is 1234. 1 Press MENU then w until you see SECURITY SETT IHS. Press OK. Enter your security code and press OK. 3 You'llsee CHANGE LOCK CODE. Press OK to change it Enter Enter a new 4-digit lock code. [= code: fem]

Press OK. 4 The phone asks you to verify your new lock code. Type in the new lock code again and press OK. The phone briefly displays Lor COGE CHAHGED Change Security Code (Menu 4 2) The security code allows access to the lock code and certain submenus, so it should be kept in a secret and safe place. separate from the phone.

+ Press MENU then w until you see SECURITY SETTINGS. Press OK. 2 Enter your security code and press OK. 50 Menu features 3 Press w to scroll to CHAHGE SECURITY CODE Press OK to change it. Enter a new 5-digit security code Press OK. 2 AB Enter new code:

Y 4 When the phone asks you to verify your new security code, key it in again and press OK S The phone briefly displays SECURITY COGE CHANGED Restore Factory Settings (Menu 4 3) This function resets the phone's menus to their fac-

tory settings Note: The lock code and security code are not changed when you reset the menu settings CURITY 1 Press MENU then Ww until you see 5 SETTINGS. Press OK. 2 Enter your security code and press OK. 3 Press w to scroll to RESTORE FACTORY SETTINGS. Press OK to reset them 4 The phone asks you to Oe 3 confirm. Press OK to reset of ARE YOU press CLR to exit without [ SURE? |

resetting 5 If you press OK, the phone briefly displays SETTINGS RES Call Settings (Menu 5) This menu jets you store calling card information in your phone, and set up calling restrictions To access Menu 5, press MENU. then w until you see CALL SETTINGS Press OK Calling Card (Menu 5 1) With this menu you store calling card information for 51 Menu features up to 2 cards in your phone. Then you can make call-

ing card calls wattiout having to enter the calling card information each time To make a calling card call, see Calling card calls" on page 20 Remember, to use the automated method of making calling card calls, you must have entered all the nec-

essary card details and selected the card (using this menu). If anly the details for one card are entered, there is no need to use the Select feature. But. if you then add the details of another card, the second card will automatically become the card in use. Only one card can be active at a time. You may enter a card name for each card, but this is optional. This name is only used for card identification on the phone display, and has no effect on the send-

ing sequence. Card A and Card B' will be replaced by the names you enter Card information may be found on your calling card. If you need further information about specific dialing sequences, contact your Calling card company. To enter or change calling card information 1 Press MENU then w until you see CALL SETTINGS. Press OK. 2 You'llsce CALLING CARD my and the currently selected : [1 cuina card. Press OK to change it. | | CARD sy Wy None 3 Use w to move the pointer to _ ne]

Hore, Card AorCard &, then press OK. When the phone asks for your security code, key it in and press OK Hf you select Hare, the phone briefly displays Hic CARO SELECTED, and no card is selected Note: ff you've already stored Card information, and then later select None, the active card is 52 Menu features deselected However, stored card information is left intact. if you select Card Aor Card B, and you've never entered information for the card before, skip to Step 5 If you've already entered information for a Card, you then have the option to t, Edit, or Er the card. Use -w to move the pointer to the option you want, and press OK.

| choases this card as the one to use. The phone briefly displays SELECTED Edi t allows you to change already-entered infor-

mation, described in Steps and 6 below Erase erases the stored information. To verify that you want to do this, press OK at the ERASE?

prompt. Press CLR if you dont want to erase the stored information. IF phone prompts you to |

LECT GIALING sect MUEHCE, press OK. DIALING SEQUENCE ||

Press W to scroll through the (7 0 oe 4 dialing sequence options, and press OK to choose one:

Ac Ho. + Frome Ho. + Card No. Use for cards that require you to enter a 1-800 access number first, then require you to enter a phone number after you hear a tone, then a card number after you hear another tone. Re qo. + Card Mo. + Pron Use for cards that require you to enter a 1-800 access number first, then require you to enter your card number after you hear a tone, then the phone number after you hear another tone:

laze + Frome Ho. + Card Ho. 53 Menu features Use for cards that require you to enter an access number (beginning with 10 then 3 digits), followed by the phone number after you hear a tone, then a card number after you hear a tone.

+ Phone Ho, + Card Me. Use for cards that require you to enter 0, then the phone number after you hear a tone, then a card number after you hear a tone. 6 The phone then prompts you for other card information, which may include: SELECT PREFIX, Card Not, and Card name: At each of these prompts. press OK For SELECT PREFIX, use w or A to move the pointer to the prefix that your calling card requires you to enter before the phone number. Then press OK. For Hot, Card Mot, and Card riame:, enter the information then press OK. The phone briefly displays CARD REAOY FOR and uses the card for which you've just entered details Calling Options (Menu 5 2) This menu lets you set your phone so that it can only make the types of calls you specify. of only in certain types of networks Note: When calls are restricted, calls may be possible to the emergency number programmed into your phone (e g., $17 or another official emergency number} including calis by Emergency 9 Dialing Carrier Selection (Menu 5 2 1) Your phone uses a carrier network {also called a cel-

lular system) to make and receive calls. Generally you sign up for sesvice with a particular carrier (your cel-

lular service provider). This is called your Home sys-

tem and usually you want the phone to use it. 54 Menu features But there may be times when you cant or dont use your Home system (for example when you travel}

Then, theres usually more than one network your phone can work in. But which one should it work in?

The point of the Carrier Selection menu is to help your phone make the best choice for you A simple fact to know: All cellular systems are either type A or B. So your Home system is either an A or B" system. To find out your system type, ask your cellular service provider. 1 Press MENU then Ww unt! you see CALL SETTINGS. Press OK. Press Ww until you see CALLIWG OPTIONS. Press OK. 2 Press ~ to scroll to as i CARRIER SELECTIOH and CARRIER the current setting. Press OK [ stEcrios |

if you want to change it t Any I 3 > The phone asks for your secunty code. Key it in and press OK 4 Press Ww to move the pointer to the option you want

{described below). Press OK to select it acd - Your dealer can program a list of preferred networks into your phone. If your dealer has done this, when you choose Preferred your phone looks first for your home sys-

tem, then a network in the preferred list, then a net-

work of the same type (A or B) as your home system, then a network of the opposite type as your home system If your dealer has not programmed this list into your phone, you can sti use the Preferred aption. The phone will look first for your home system, then a net-

work of the same type as your home system Hon-Fr J - Your phone will choose a net-

work that is of a different type than your Home sys-

55 Menu features tem. Aru - The phone first looks for your home system, then a network of the same type as your home sys-

tem, then a network of the opposite type as your home system. Hore Grslig - The phone only looks for service on the Home system. It won't choose any other network, so if you're out of your Home system, you won't have service (HO) SERVICE) The following table shows which system the phone attempts to use, and the phone's display indications, depending on which menu item you've selected. and whether or not your dealer has programed the phone with a Preferred list of systems. 56 Menu features System selection and display indications Does. x i, Menu | phone | Order in Displayed | OfSPlayed

. which phone | ay System ites rae | Searches the system name | indicator selected ere systems icon | ormessage | ia of B) Preterrea]es 1) Home sons [Blanks Blank system home system name 2) Preferred hist. [Fasting [PREFERRED/

in prignity or Pre(erred signal strength system name order 3) Home type | Blank ROAMING 4) Non-hame [Blank |NON-PREF. type No. 1) Heme Sobd Blank/ Home syste home system _[tetier name (A oF B) 2) Home type [Flashing [ROAMING Ron. [Ogesnt [Non-Rome type [Blank |NON-PREF. [Non-nome preferred |matter letter

(Aor B) Any Bcesn't |1) Home Solid Blank/ home AB matter | system system name 2 Home type [Flashing [ROAMING Blank [NON-PREF Home Doesn, [Home system {Solid Blank or home |Blank Only matter system name Allowed Calls (Menu 5 2 2) 1 Press MENU then until you see CALL SETTING:

CRALLIMG OPTIONS. Press OK Press OK. Press W until you see 2 Press ~ to scroll to oe. ALLOWED CALLS and the | PRLLOWED current setting. Press OK if [caus \ t Ou want to change it Allow allt y 9 wo 3) The phone asks for your security code. Key it in and press OK 57 Menu features 4 Press W to move the pointer fa t to the option you want Incoming

(described below}. Press OK (frRllow all to select it , Nat'l only I Fillaw 311 - There are no restrictions on outgoing calls Mat? 1 arly - You can only make calls within your own country; you Cannot make international cails. 111 - You can only make local calls, or calls to toll-free numbers beginning with 1800, 1888, or 1877. You cannot make national calls (prefixed with 1) of international calls (prefixed with 011) Mem. orl - You can only make outgoing calls to numbers stored in Phone Book locations 10-14 Note. You cannot store any numbers in the phone airectory when Mem. only is selected Tncomireg - You can only receive incoming calls;

your phone will not allow outgoing calls Lock Phone (Menu 6) When you lock your phone, you cannot make outgo-

ing calls (except to the number stored in Phone Book location 75 and the emergency number programmed into your phane). Also, you cannot access the phones Phone Baok or menu. You can receive incoming Calls as usual. To make a call ta location 75 when the phone is locked, press W then SEND. To call the emergency number, enter the entire emergency number then press SEND 1 Press MENU then w until you see LOCE PHOHE Press OK 58 Menu features 2 The phone asks you to Enter c Code, 3 Enter the lock code and press OK. The phone displays FHOHE LOCKED LOCKED remains on the display to remind you that the phone is locked. To unlock the phone, press MENU and the phone will prompt you for the lock code. Key it in and press OK. Messages (Menu 7) Note: This menu is available on the Nokia 282N only. The messages feature depends on network and subscription. To access Menu 7, press MENU, then ~ until you see MESSAGES. Press OK. Read Messages (Menu 7 1) The phone automatically stores the last 20 short text messages you have received in the Read Messages list. (You can receive text messages if the network supports this service, and if you subscribe to this service - refer to your service provider for more infor-

mation}. This menu lets you scroll through and read the stored messages. Stored messages remain in the phones memory when the phone is switched off. The same message isnt stored twice in the list you want lo erase a message, use Menu 7 2 1 Press MENU, then w until MB p you see ME! GES. Press READ |

OK. [resseces | i 2 Press to scroll to READ Y e MESSAGES. Press OK. The ~~

display will show MI SE (3) RECEIVED if there are new ones. or it will show the first (read) message in the list if tere are no new ones 59 Menu features 3 Use w or A to scroll to the a 7 message you want to read; NEw: |

eg. HEW: CALL HOME) CALL HOME |

HEW! denotes an unread mes- [yr 0 sage. whereas OLD would denote a previously read message Each message has a number which shows in the top right corner of the display. The newest mes-

sage is 1. After you have read the last message, the phone displays +E MDasK:

Erase Messages (Menu 7 2) This menu lets you erase any of the stored messages. Note: This menu erases messages you select, and cannot be undone!

1 Press MENU, then w until you see MESSAGES Press OK 2 Press ~w to scroll to ERAS!

AISES. Press OK. AB ERASE MESSAGES ME 3 Use Ww or A to scroll to the message you want to erase ERASED Press OK, When ERASE? is [ |

displayed, press OK again lu A The phone will briefly display Sa ERASEG. The list of stored messages is then re-

ordered and the next message is displayed. If the list is empty {when you try to erase messages), HO W3ES is displayed Message Alert Tone (Menu 7 3) This menu lets you set the type of alert tone you hear when you receive a text or voice message Note. You can adjust this menu feature in the normal way, but it will also be adjusted automatically when 60 Menu features you select a Profile (refer to Selecting the Profile on page 78). 1 Press MENU. then w until you see MESSAGES. Press OK. 2 Press ~ to scrall to 1B MESSAGE ALERT TONE and [eas the current setting. Press OK ALERT TONE if you want to change it Short T 3 Press ~ to move the pointer 4B to the option you require Short Short, Long, Vibra Only or Off. | [ses Press OK to choose it i] Vibra Only cane ty Y These options are described below:

wrt causes the phone to beep 3 times when you receive a text or voice message. Leowng causes the phone to beep for 15 minutes when you receive a voice or text message. To stop the beeping, press any key except the PWR or the Ww or A (volume) keys Gitra Orly - causes the phone to vibrate when you receive a voice or text message Off means the phone won't beep (or vibrate}

when you receive messages. In-Cali Menu This is available only when you're in 2 call. To access it, give the MENU key a short press. (A long press of the MENU kcy gives you the regular menu.) The in-call menu works just like a regular menu -

press W or A to move the pointer then press OK to select an option. After you make a choice, the phone automatically exits the in-call menu 61 Menu features Mute - This mutes the phone during a conversation The phone displays MUTED. To unmute the phone, select the Mute option again. The phone displays MUTE OFF ered DTMF - To send DTMF (Touch Tone) strings during a call, first recail the stored string from the Phone Book. Then, access the in-cal! menu with a short press of MENU. Move the pointer to Serd OTMF and press OK. The phone sends the DTMF

(Touch Tone) string. See "Sending touch tones" on page 64 Note: When you're in the In-Call Menu, pressing any key (0-9, *, #, CLR or END) exits the in-Call Menu The phone displays the digit pressed instead. While the phone is alerting you of an incoming call

{and there are no other calls active or held), the In-Cait menu is not available until you answer the call. Similarly, when you press SEND to initiate a call, until the call is connected, there is no In-Cal! Menu. 62 Menu features 8. Data and Touch Tones Data Mode Data Mode can be used when your phone is con-

nected, via a suitable data card and modem, to a lap-

top or personal computer. You may then use your computer to make and receive calls, and to send and receive dala messages such as emails. Follow these steps before using Data Mode 1 Ensure your phone is switched on, and that the battery has enough charge for the duration of your data calls 2 Ensure that you are receiving a strong signal (see signal strength indicator on the display). 3 Ensure that your computer is switched on, and is fitted with a data card 4 Connect the data cable to the data card, and to your phone To select Data Mode

* Connect the data cable to your phone (ATA CARO SOMNECTED displays). When in a call, with the data cable connected, the phone displays DATA CALL In a data call, the keys on the phone dont work except for END; when not in a call, all keys work Also, the microphone and earpiece dont work in a data call Important! When you are in Data Mode, do not switch off the phone. Do not move the phone, or use it in a moving vehicle (data will be lost if you move from one cell to another) 63 Data and Touch Tones To de-select Data Mode

+ Disconnect the data cable (GATA CARO REMOVED displays}

To operate your modem and data card

* Refer to the documentation supplied with these Items Sending touch tones Your phone is a Touch Tone phone. Touch Tones are the sounds your phone makes when you press the keys. Touch Tones can be used for many auto-

mated phone services such as checking your bank balance and using voice mailbox options. Your phone refers to Touch Tones as DTMF (Dual Tone Multi Frequency) Manually sending touch tones Pressing the keys during a call sends Touch Tones To do this:

1. Make a callin the usual way (e.g. to your bank's computer phone number}

2 Manually Enter the digits to be sent as Touch tones

(e.g., your bank account number and password) Automatically sending touch tones For automatic sending of Touch Tones, you can store the Touch Tone string within the same Phone Book lacation as the access phone number. Store a pause

(p) or wait {w) character between the phone number and the Touch Tone string See Special characters in stored numbers on page 26 for details on storing pause and wait charac-

ters 64 Data and Touch Tones The following is an example of a number you could store in your phone This number contains a phone number

(18005551212), a wait character, an access number

(1234), a wait character, and a password ('3434) -

78005551212w1234w3434 When you recall this number from the Phone Book and press SEND, the phone:

Dials 18005551212 (the phone number), then:

Waits for you to press SEND again. When you do, the phone sends the numbers 1234. Waits for you to press SEND again, then sends the numbers 3434 The following example shows storing pause charac-

ters as well as wait characters (Note that a wait Character must still be included, as shown, to sepa-

rate the phone number from the following digits):

18005551212w1234p3434 When you recall this number from the Phone Book and press SEND, the phone Dials 18005551212 (the phone number), then Waits for you to press SEND again. When you do, the phone sends the numbers 1234. It then Pauses for 2.5 seconds, then sends the numbers 3434 Note: if the keypad tones have been set to Off, the Touch Tones will stil be sent, but you will not hear them. Pressing MENU SEND sends a displayed number as a Touch Tone To end the call, press END after the phone sends the Touch Tones and has returned to the normal call mode 65 Data and Touch Tones Using the Flash function Your cellular system may offer a flash function serv-

ice. This system service lets you accept or make a second call when you already have a Call in progress

(c.g. set up a conference call), or send other informa-

tion to the network, such as Credit card numbers. Pressing SEND sends a displayed number to the net-

work as a flash, unless it is preceded by a p or 'w

(in these cases it is sent as a Touch Tone.}

After the phone number has been entered, you can add extra information which is for flash sending to the network Contact your service provider for further details. 66 Data and Touch Tones 9. Network Services Availability of network services The network services available will depend on the model of your phone, the cellular system (AMPS or NAMPS} on which it operates, and the services offered by your cellular service provider. To be able to use any of the network services, you will need to subscribe to the particular service. The serv-

ice may not be available in all cellular service provider networks. Please contact your local cellular service provider for further information Some services which may be available are listed below and described briefly in this section Calling Line Identification Call Waiting Message Waiting

- Voicemail Digital Messaging Service, which includes Short Message Service and Callback Number Service. Calling Line Identification When someone calls you, the CGF phone can display the caller's | OHH \

phone number or name (or a text |

message}, with CALLING flash- ALL IEW Y a ing io

-!!*~S If the presentation of the caller's identity is restricted by the network, or 1s withheld by the caller, CRLL CALLER ID SLOCKED or CALL - TO NOT AVAILABLE may be displayed instead The caller's name will be displayed if itis sent by the network, or if the number sent matches the number and name stored in your Phone Book. 67 Network Services Note: If the last seven digits of an incoming caller's number match the last seven digits of a number stored in the Phone Book, the phone displays the stored number/name even if the area code or other dialing prefix is different The number will be stored in the Received Calls list or the Missed Calls list, depending on whether you answer the call or not Cali Waiting Calt Waiting allows you to be informed of a incoming call while you already have a call in progress When you have a call in progress ar 4 and a third party calls you, the JOHH |

phone can display the caller's [ | i

| i phone number or name (or a text , CALLING message), with CALLIMSG flash- \

ing If the presentation of the caller's identity is restricted by the network, or is withheld by the caller, CALL. CALLER 10 BLOCKED or CALL - ID NOT RAURILABLE may be displayed instead aw) To answer the incoming call:

1 When you get an incoming call alert (eg, if you hear a beep. or see the caller's number or name, with CALLIMG flashing), press SEND 2 The second call will be answered, and the first call will be put on hold (the caller's number, if available, will be stored in the Received Calls list). To then swap between the two calls, press SEND. To end the both calls, press END The caller's name will be displayed #f it is sent by the network, or if the number sent matches the number and name stored in your Phone Book Note. if the last seven digits of an incoming caller's 68 Network Services number match the last seven digits of a number stored in the Phone Book, the phone displays the stored number/name even if the area code or other dialing prefix is different Note: if you have a headset connected, press SEND to answer a second incoming call, or to swap calls. If you press the headset button when a second incoming Call is alerting you will just end the first call if the second call then alerts {as a normal incoming call) you can press the headset button again to answer the call If you dont answer the incoming call, after approxi-

mately 20 seconds the call alert indications will stop and the caller's number (if available} will be added to the Missed Calls fist To clear the incoming call alert indications without answering the call:

+ Press any key except SEND, END or PWR Message Waiting (Voicemail) Message Waiting informs you of unheard voice mait messages in your voice mailbox. The method of noti-

fication varies from one network to another If you receive voicemail the voicemail indicator QO lights, En VOICE MESSAGE orn NEM VOCE

(GES may be displayed, indicating the number (n) of unread messages. ie:

the index number may show the number of unread messages, and a message-received tone may be heard, depend-

ing on the new-message alert option you choose, refer to Message Alert Tone (Menu 7 3)" on page 60. To listen to your Voice Messages you can do any of 69 Network Services the following

* When HED VOICE ME:

MES!

ISE orn MEW VOTE GE'S is displayed, press SEND or OK

+ Give the 1 key a long press to quick dial your voicemail access number {if it is stored in Phone Book location 1; see the following Note}

* Enter your voicemail access number, then press SEND The service may offer voice guidance. You may need to press keys on the phone keypad to access fea-

tures. Note: To be able to quick dial your voice mailbox with the | key:

1 Save your Voice Mailbox Access Number in Phone Book location 1 (see Saving entries on page 23) 2 Set the 1-Touch Dialing menu feature to On; for details, refer to "1-Touch Dialing (Menu 3 6)" on page 44 You only need to do Steps 1 and 2 once (unless, of course, your voice maitbox access number changes) Digital Message Service

(Nokia 282N only) When you cannot answer calls the caller or switch-

board can send you a short message using the Digital Message Service (DMS). The message can be a short text message, a callback number, or a note to Say you have voicemail When you receive a message the text message indicator [&7] lights the note MESSAGE RECEIVED orn ME REIE TWEC or a callback number may be dis-

played 70 Network Services the message alert tone may be heard (to stop the long tone, press any key except PWR or ~w or A) the message is stored automatically in the Mes-

sages list To read a message when MESSAGE RECEIVED orh' NESSAGES RECEIVED is displayed:

+ Press OK, or Ww or A To scroll other stored messages, press W or A. When at the bottom of the list. press A to go up the list To erase a displayed message:

1 Press CLR 2 When ERAS

"is displayed, press OK. To exit the Messages list:

1 Press CLR twice You can also read and erase messages. and set the Message Alert Tone, using the Messages menu - for details, refer to Messages (Menu 7)" on page 59 (this menu item is available on the Nokia 282N only). Ifthe [7] indicator blinks the Messages List is full of read or unread messages. If 20 messages are already stored, when a new message arrives the old-

est is erased automatically. If the same message is received twice, the most recent message is stored, but the old message is crased from the Messages List Short Message Service (SMS) Callers can send you short pre-defined messages, such as CALL HOME. Contact your local service pro-

wider for information:

71 Network Services Callback Number Service Callers can send you their callback numbers. Con-

tact your local service provider for information. Note: if the number received matches a number and name stored in the Phone Book the name will be displayed instead. To call the number received

+ With the number (and message) displayed. press SEND Some networks use this feature to send voicemail notification 72 Network Services 10. Accessories An extensive range of accessories is avaitable for your phone. You Can select the accessories that best suit your specific communication needs For availabilky. please check with your local dealer. A few practical rules for accessory operation Keep the accessories out of small childrens reach When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord. Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Instaltation of complex car equipment must be completed by qualified personnel only. WARNING!

Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types wil invalidate any approval or warranty apply-

ing to the phone, and may be dangerous. The chargers and some of the other accessories available for your phone are described in this section Please refer to your dealer for further information 73 Accessories Also, refer to any accessory options manual that may have been included in your sales package for the entre line of authentic Nokia Genuine accessories. Note: When a Charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life. If left unused, a fully charged battery will discharge itself over time. BLP-2 Standard Li-ion Battery The Standard (900mAh) battery, useful as a spare or as a replacement, can be charged separately in the Desktop Charging Stand, or when fitted in the phone (from any of the charging options). Note. When placing the battery in the Charging Stand or phone, the contacts on the battery must be aligned with the contacts on the Stand or phone. For charging times and other battery information, see Fitting and charging the Battery on page 7 ACP-7 Standard AC Travel Charger The Standard AC Travel Charger is an economical and durable charging option Plug the charger into a wail out-

let. and plug the connector (on the charger lead) into the bot- i tom of your phone. Check the charging status on the phone display. For charging umes and other battery information, see Frting and charging the Battery on page 7 Calls can be made during charging, but charging will stop for the duration of the call and the battery bar scrolling stops. 74 Accessories Note: if the battery is completely discharged, you cannot use the phone until it has enough charge to operate The Travel Charger is available for different voltage levels and can also be used with the CGL-2 Desktop Charging Stand. ACP-9 Rapid AC Travel Charger The extremely light, functionally designed Rapid AC Travel Charger charges your phone bat-

tery quickly Plug the charger into a wall outlet and plug the connector (on the charger lead) into the bottom of your phone. Check the charging status on the phone display. Calls can be made while charging For charging times and other battery information, see Fitting and charging the Battery on page 7 Operating within a voltage range of 100V-240V AC, 50Hz-60Hz", the Rapid Travel Charger is practically voltage-independent in normal office and household use. The Rapid Travel Charger can be used with the CGL-2 Desktop Charging Stand

(Voltage range and operating frequency depend on model and country.) LCH-9 Rapid Cigarette Lighter Charger The multivoltage Rapid Cigarette Lighter Charger allows you to charge your phone quickly, from your vehicle battery, when you x travel. This small oe chargers functional design fits well with most car lighters and interiors 75 Accessories Charging Times are the same as for the Rapid Travel Charger ACP-9). For charging times and other other battery information, see "Fitting and charging the Bat-

tery on page 7. Calls can be made while charging A green light indicates that the Rapid Cigarette Lighter Charger is ready to charge. Check the charg-

ing Status on the phone display. The input voltage is 12 of 24 V OC, negative grounding The Rapid Cigarette Lighter Charger can be used with other accessories available for your phone. Avoid prolonged charging with the Rapid Cigarette Lighter Charger when the car engine is not running This may cause the battery of your car to drain. Note: in some cars the cigarette lighter socket is not Provided with power when the ignition is switched off. Verify that the green LED light is lit. CGL-2 Desktop Charging Stand The Desktop Charging Stand allows you to mount and charge both your phone and a Spare battery. Plug the charger into a wall outlet and plug the connec-

tor (on the charger lead) into the back of the Desktop Charging Stand. Place your phone and/or a spare battery in the stand to begin charging. When both the phone and a spare battery are fitted, the phone battery is charged first, then the spare battery Note: When placing the battery in the Charging Stand for phone), the contacts on the battery must be aligned with the contacts on the Stand (or phone}

The charging status of the phone battery is shown on the phone display The charging status of the spare battery 1S shawn on the LED indicator on the stand - it 76 Accessories will be red when charging, and green when charged The Desktop Charging Stand can be used with the Standard Travel Charger ACP-7U or the Rapid Travel Charger ACP-9U. BCP-5 Belt Holster The Belt Holster allows you to carry your phone, securely and conveniently. Just slide the phone in until it clicks into place. To remove the phone, push it away from the holster. 77 Accessories 11. Reference Information Important Safety Information Traffic Safety Oo not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing Always secure the phone in its haider; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. The use of an alert device to operate a vehicle's lights or horn on public roads is not permitted Remember. road safety always comes first!

Operating Environment Remember to follow any special requiations in force in any area and always switch off your phone whenever it is forbid-

den to use it Or when it may Cause interference or danger. When connecting (he phone or any accessory to another device. read its user's quide for detailed safety instructions. Do not connect incompatible products. As with othes mobile radio transmitting equipment. users are advised that for the satisfactory operation of the equipment and for the safety of personnel. it is recommended that the equipment should only be used in the normal operating posi-

tion (held to your ear with the antenna pointing over your shoulder}. Electronic Devices Most madern electronic equipment is shielded from radio fre-

quency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless. phone. Pacemakers Pacemaker manufacturers recommend that a minimum sep-

aration of 6 inches {20 cm.) be maintained between a hand-

heid wireless phone and a pacemaker to avoid potential Interference with the pacemaker. These recommendations are consistent with the independent research by and recom:

mendations of Wireless Technology Research. Persons with pacemakers:

78 Reference Information

+ Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on;

Should not carry the phone in a breast pocket;

+ Should use (he ear apposite the pacemaker to minimize the potential for interference Ifyou have any reason to suspect that interference is tak-

ing place. off your phone immediately. Hearing Aids Same digitat wireless phones may interfere with some hearing aids. In (he event of such interference, you may want to con-

sult your Service pravider Other Medical Devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inade-

quately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or heatth care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signats may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air bag systems) Check with the manufacturer ar its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle Posted Facilities Switch your phone off in any facility where posted notices so require. Potentially Explosive Atmospheres Switch off your phone when in any area with a potentially explosive atmosphere and obey alt signs and instructions. Sparks in such areas could cause an explosion or fire result-

ing in bodily injury or even death 79 Reference Information Users are advised to switch off the phone while at a refueling point (service station}. Users are reminded of the need to observe restactians on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress Areas with a potentially explosive atmosphere are often but not always Clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane): areas where the air contains chemicals or particles, such as grain, dust of metal powders; and any other area where you would normally be advised to turn off your vehicle engine Vehicles Only qualified personnel should service the phone. or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids. gases or explosive materials in the same Compartment as the phone, its parts or accessories, For vehicles equipped with an air bag. remember that an air bag inflates with great force. Do not place objects. including both installed or portable wireless equipment. in the area aver the air bag or in the air bag deployment area. ff in-vehicle wireless equipment is impraperly installed and the air bag inflates. serious injury couid result. Switch off your phone before boarding an aircraft. [ne use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, may disrupt the wireless telephone network and may be illegal, Failure to observe these instructions may lead to the suspen-

sion or Geniat of telephone services to the offender, or legal action, or both, Emergency Calls IMPORTANT!

This phone, kke any wireless phone. operates using radio sig-

nals. wireless and landline networks as well as user- pro-

grammed functions which cannot guarantee connection in alt conditions. Therefore, you should never rely solely upon any wireless phone for essental communications (e.g. medical 80 Reference Information emergencies}

Remember, to make or receive any calls, the phone must be switched on and in a service area with adequate signat strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. Making an Emergency Call 1 If the phone is not on, switch it on by giving the PWR key a long press. Give CLR a long press to clear the display Enter the emergency number for your present location (e.g. 911 or other official emergency number). Emergency numbers vary by location. 4 Press SEND If certain features are in use (Keyquard, restricted calls, etc.), you may first need to turn those features off before you can make an emergency call. Consult this dacument and your focal cellular service provider. When making an emergency Call. remember ta give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communi-

cation at the scene of an accident. Do not cut off the call until given permission to do so Radio Frequency (RF) Signals Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON. it receives and also sends out facto frequency (RF) signals. In August. 1996 the Federal Communications Commission

{FCC) adopted RF exposure guidelines with savety levels for handheld wireless phones. Those guidelines are consistent with safety standards previously set by both U.S. and interna-

tional standards bodes ANSIC95.1 (1992), NCRP Report 86 (1986). ICNIRP

(g96)"

Those standards were based on comprehensive and periodic evaluations of the relevant scientific fiterature. For example over 120 scienusts. engineers, and physicians fron universi-

ties, government health agencies and industry reviewed the available body of research ta develop the ANSI Standard

(C95.1}

81 Reference Information The design of your phone complies with the FCC quidelines

(and those standards) American National Standards Institute, National Council on Radiation Protection and Measurements; International Com-

mission on Non-lonizing Radiation Protection Care and Maintenance Your phone is 4 product of superior design and craftsman-

ship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and allow you to enjoy this product for many years. When using your phane, battery. charger, OR any accessory:

Keep it and ailits parts and accessones out of small chil-

dren's reach Keep it dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circus. Do not use or store it in dusty, dirty areas as its moving parts can be damaged. Do not store it in hot areas. High temperatures can shorten the life of electronic devices. damage batteries. and warp or melt certain plastics Do not stare it in cold areas. When the phone warms up

{to its normal operating temperature}. moisture can form inside the phone. which may damage the phone's elec-

tronic circuit boards. Do not attempt to open it. Non-expert handling of the device may damage it Do net drop, knock or shake it. Rough handling can break internal circuit boards Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth slightly dampened in a mild Soap-and-water solution. Do not paint it, Paint can clog the device's moving parts and prevent proper operation. Use only the supplied or an approved replacement antenna. Unauthorized antennas, moddications or attachments could damage the phone and may violate regulations governing radio devices. ifthe phone. battery. charger, or any accessory is not working properly. take it to your nearest qualified service facility The personnel there wall assist you, and if neces~

sary. arrange far service. 82 Reference Information 12. Troubleshooting If the power does not come on or stay on:

Make sure the battery is properly installed and charged

* Be sure that the contacts on the battery and the charging stand are clean

* Battery charge may be too low for operation Check the display and listen for the low battery warning tones If the power comes on, but the phone does not work:

Ifthe phone displays HO SERWICE, you're out of the service area and you cant make calls. You also get this message if you've chosen Hane Orly in the Carrier Selection menu (Menu 5 2), and you've left your Hame system

* Make sure that the antenna is properly installed and if your phone has an extendable antenna, make sure that the antenna is extended to its full length

* Check if there is an error message on the display after switching the phone on. If so, contact your local deater 83 Troubleshooting 13. Technical Information Weight . 4.27 02 (122g) Transmitting power 500mW nominal Operating voltage: 3.6V de 12V de for car kit Frequency band 824.040 to 848.970MHz (TX) 869.040 to 893.970MHz (RX) Number of channels: 823 (NAMPS 2412}

Phone Book capacity Up to 75 locations (see Note) Up to 32 numeric digits, and 30 letters per focation Note: The maximum number of Phone Book entries depends on how much information you store in each location 84 Technical Information 14. Warranty USA :

NOKIA MOBILE PHONES - 6200 Courtney Campbell Causeway. Suite 900, Tampa. Ft 33607 Tel: 1-888-NOKIA2U (1-888-665-4228) CANADA NOKIA PRODUCTS LTD, - 575 Westney Rd, South. Ajax, Ontario L1S 4N7. Tek: (905) 427-6654 Part No. 9351762 NOKIA and the NOKIA logo are registered trademarks of Nokia Corporation, Finland. The information contained in this User Guide was written for Nokia phone NHA-SNA/NHA-9SA, The right to make changes and improvements to any of the products described in this guide without pnor notice is reserved. Issue No. 1. 1998 Nokia Mobile Phones. All rights reserved These commodities are authorized by the U.S. Government for export only to Canada, Mexico, or the United States. They may not be resold, diverted, transferred, or otherwise dis-

posed of in any other country, either in their original form or after being incorporated through an intermediate process into other end-items, without the written approval of the U.S Department of State NOKIA One-Year Limited Warranty Nokia Mobile Phones. Inc. (NMP!"} warrants that this cellular phone ("Product) is free from defects in material and work-

manship. according to the follawing terms and conditions:

1. The limited warranty for the Product extends for ONE (1) year beginning on the date of purchase of the Product 2. The limited warranty extends only to the original consumer purchaser (Consumer) of the Product and is not assignable or transferable to any Subsequent purchaser/end user, 3 The limited warranty extends only ta Consumers who pur-

chase the Product in the United States 4. During the bmited warranty period, NMPI will repair, of replace, at NMPI's option, any defective parts. or any parts that wil nat property operate for their intended use with new oc factory rebuilt replacement items. No charge will be made to the Consumer for any such parts. NMI will also pay tor 85 Warranty the labor charges incurred by NMP in repairing or replacing the defective parts. The external housing and cosmetic parts shall be free of defects at the time of shipment and, therefore, shail not be covered under these limited warranty terms. 5. Upon request from NMPI, the Consumer must provide information to reasonably prove the date of purchase. 6. The Consumer shall bear the cost of shipping the Product to the Customer Service Department of NMPI. NMPI shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty. 7. The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:

a) The Product has been subject to abnormal use, abnormal conditions, improper storage, exposure to moisture or damp-

ness, unauthorized modifications, unauthorized connections. unauthorized repair, misuse, negtect. abuse. accident. altera-

tion, improper installation, or other acts which are not the faut of NMPI, including damage caused by shipping and blown fuses. b) The Customer Service Department at NMPI was not noti-

fied by Consumer of the alleged defect or malfunction of the Product during the applicable limited warranty period.

) The Product serial number plate or the accessory date code has been removed. defaced. o7 altered d} The defect or damage was caused by the defective func-

tion of the cellular system. or by inadequate signat reception by the external antenna. 8. if problem develsps during the limited warranty period. the Consumer should take the following step-by-step proce-

dure. a} The Consumer shalt return the Product to the place of pur-

chase for repair or replacement processing b) If "a" is not Convenient the Consumer may contact the Customer Service Department at NMPF, at the phone number listed on the bottom of the next page for further instructions.

) The Consumer shail ship the Product prepaid and insured:

Expenses related to removing the Product from an installation are nol covered under this limited warranty. di} The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer shail be responsible for expenses related to remstallation of the Prod-

ut e) 1 the Product 1 returned to the Customer Service Depart:

86 Warranty ment at NMP during the kmited warranty period, but the problem with the Product cannot be fixed under the terms. and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charyes billed to the Consumer. If the estimate is refused, the Product will be returned freiyht collect. if the Product is returned to the Customer Service Department at NMPI after the expiration of the warranty period, NMPi's normal service policies shall apply and the Consumer will be invoiced for all shipping charges. 9. The Product consists of newly assembled equipment that may contain used companents which have been reproc-

essed to allow machine compliance with Product perform-

ance and reliability specifications. 10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OF USE, SHALL BE LIMIfED TO THE DURATION OF THE FOREGOING WRITTEN WARRANTY. OTHERWISE, THE FOREGOING WARRANTY IS THE PURCHASERS SOLE AND EXCLUSIVE REMEDY AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NMPi SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR ALOSS OF ANTICIPATED BENEFITS OR PROFITS, RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE WARRANTY EVEN IF NMPI KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. 11. Some states do not allow limitation of how tong an implied warranty lasts. so the above limitation may not apply to you (the Consumer). Some states do not allow the exclu-

sion of incidental or consequential damages. so the above limaation or exclusions may not apply to you (the Consumer) This limited warranty gives you specific legal rights and you may also have other rights which vary from state to state. 12. NMPI neither assumes nor authorizes any authorized service center or any person or entity to assume for it any other obligation or liability beyond that which is expressly pro-

vided for in this limited warranty 13 Questions concerning this limited warranty may be directed ta the Customer Service Department at Nokia, 6200 Courtney Campbell Causeway. Suite 900. Tampa. FL 33607. fel: 1-888-NOKIA2U (1-888-665-4228) or (B13) 288-3800, Facsimile: (813) 287-6672 14. The timited warranty period for Nokia Product Corp. sup-

vied attachments and accessories are specifically defined vathin their awn warranty cards and packaying 87 Warranty 15. Index Symbols

*' (link) character 26 p (pause) character 26, 63 w (wait) character 26, 63 Numerics 1-touch diakng 16, 44 9 key. See also emergen-

cy 9 dialing 16 A active open 47 allowed calis 56 automatic answer 46 automatc redial 47 B battery 7-11 charge indicator 5 charging 8 charging times 9 disposal 11 fitting 7 removing 10 talk and standby times 9 BATTERY LO 9 c call log 37 CALL MOT ALLOWED 13 call timers 40 call waiting 67 callback number service 70 calling card 51 calls 20 entering informauan about 52 calling line idenufcation index 15, 66 calls answering 14 automatic answer 46 ending 14 international 13 making 13 making an emergency call 80 Calls lists dialed calls 37 erasing 40 missed cails 39 received calls 38 carrier selection 54 chargers 9, 73-74 CLR key 13 clearing Phone Book entries 4 to edit name or number 35 to end PIN Call attempt 22 to exit Menu 317 D data mode 62 dialed calls list 37 digital message service 69 DTMF 21, 61, 63 E emergency 9 dialing 16, 45 emergency calls 16, 79 making 80 with keyguard active 18 F flash function 65 H house indicator in-call menu 60 indicators AB S5 ABC 5 K Keyguard 17 keypad tones 43 L language 45 letters and punctuation 25 lights 43 lock code 49 lock phone 57 LOCKED 12, 58 M menu accessing 31 in-call 60 shortcut methad 31 summary 33 using during a call 32 message waiting 68 messages alert tone 59 erasing 59 menu 58 teading 58 text message indicator 5 voice and text 22 voicemail indicator 5 missed Calls list 39 N network services 66 HO SERVICE 13.55, 82 notepad memory 28 89 Oo overflow indicator 5 Pp phone book 23-29 editing an entry 34 erasing entries from 36 finding entries in 27, 33 giving an entry VIP sta-

tus 29 linking locations 26 location 75 26, 57 location number indica-

tor 5 maximum number of lo-

cations 23 menu 33 moving an entry 29 saving entries in 23, 34 status of 36 phone indicator 5 phone number 46 PIN calls 21 pointer 5 preferred network 55 profile selecting 18 settings 19, 20 usefulinformation about 19, 20 R received calls list 38 RECHARGE BATTERY 9 redial automatic 47 last 15 dialed calls 16 fast number 16 REPLACE? 24, 35 restore factory settings 50 ringing options 41 index tone 42 volume 42 roam beep 48 Ss safety guidelines 1, 77 security code 50 short message service 70 signal strength 6 indicator 5, 6 speed dialin SYSTEM B T touch tones 21, 61, 63 Vv VIP entry menu 36 VIP feature 29 voicemail 68 indicator 5 volume earpiece 15 Ww warranty 84 welcome note 12 menu 48 47 90 index ed EXCERPT FROM USER GUIDE FCC/Industry Canada Notice Your phone may cause TV or radio interference (e g when using a telephone in close Proximity to receiving equipment). The FCC/Industry Canada can require you to Stop using your telephone if such interference cannot be eliminated. If you require assistance, con- 2

\ tact your local service facility. This device complies with part 15 of the FCC rules, Operation is subject to the condition that this device does not cause harmful interference. Using this Guide The wireless phone described in this guide is approved for use in AMPS and NAMPS networks. A number of features inctuded in this guide are called Network Services. They are special services provided by wireless service providers. Before you Can take advantage of any of these Network Services, you must subscribe to the service(s) from your home serv-

ice provider and obtain instructions for their use. For Your Safety