all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual rev | Users Manual | 1.20 MiB | July 09 2005 | |||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | Test Setup Photos | |||||||
1 | Test Report | |||||||
1 | Test Report |
1 | Manual rev | Users Manual | 1.20 MiB | July 09 2005 |
770_ENv3_US_UG_9240895.fm Page 1 Tuesday, September 6, 2005 3:57 PM Nokia 770 Internet Tablet User Guide 9240895 Issue 3 770_ENv3_US_UG_9240895.fm Page 2 Tuesday, September 6, 2005 3:57 PM LEGAL INFORMATION Part No. 9240895, Issue No. 3 Copyright 2005 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation. Bluetooth is a registered trademark of Bluetooth SIG, Inc. This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>. The information contained in this user guide was written for the Nokia 770 product. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice. UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED AS IS. EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. EXPORT CONTROLS This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited. FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a device in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your device if such interference cannot be eliminated. If you require assistance, contact your local service facility. Any changes or modifications not expressly approved by Nokia could void the users authority to operate this equipment. 2 770_ENv3_US_UG_9240895.fm Page 3 Tuesday, September 6, 2005 3:57 PM Contents For your safety......................... 5 1. Overview ............................ 7 Nokia support on the Web......... 7 2. Get started......................... 8 Remove the protective cover..... 8 Insert the battery.......................... 8 Charge the battery ....................... 9 Insert the memory card............... 9 Switch the device on or off ..... 11 3. Your device ...................... 11 Front and top side ...................... 11 Base and right side..................... 12 Touch screen ................................ 13 Task navigator .......................... 13 Application title area ............. 14 Status indicator area.............. 14 Minimize and close buttons .. 15 Application area ...................... 15 Toolbar........................................ 16 Calibrate the touch screen ... 16 Home view .................................... 16 Device control.............................. 17 Stylus .......................................... 17 Hardware keys.......................... 17 Text input methods .................... 18 On-screen keyboard................ 19 Handwriting recognition....... 20 Volume control............................ 20 Device lock.................................... 20 Touch screen and key guard.. 21 Memory management ............... 21 Help................................................. 22 Search for information.............. 22 4. Access the Internet ......... 23 Create a new WLAN connection....................... 23 C o n t e n t s Edit an existing WLAN connection....................... 24 Create a new cellular connection..................... 25 Bluetooth wireless technology................................. 25 Pair a phone with your device................................ 25 Set up a cellular connection.. 26 Connectivity settings................. 28 Disable connections................ 29 5. Web browser .................... 29 Browse the Web.......................... 29 Manage bookmarks.................... 30 6. E-mail............................... 31 Basic e-mail settings ................. 31 Retrieve and read e-mail.......... 32 Create and send e-mail............. 33 E-mail scheduling....................... 33 Inbox folder .................................. 33 Outbox folder............................... 34 Sent folder .................................... 34 Drafts folder ................................. 34 Own folders .................................. 34 7. Media players and viewers.............................. 35 Audio player ................................. 35 Internet radio............................... 35 Video player.................................. 36 Images............................................ 36 News reader ................................. 36 PDF reader..................................... 36 8. Control panel ................... 37 3 770_ENv3_US_UG_9240895.fm Page 4 Tuesday, September 6, 2005 3:57 PM 9. Tools, utilities, and games............................... 38 File manager ................................ 38 Connection manager................. 38 Calculator ..................................... 38 Clock .............................................. 38 Notes.............................................. 39 Sketch............................................ 39 Games............................................ 39 10. Memory cards and PC connectivity..................... 39 Memory cards.............................. 39 PC connectivity ........................... 40 11. Battery information ........ 41 Charging and discharging........ 41 Nokia battery authentication guidelines ..................................... 42 Care and maintenance........... 43 Additional safety information.. 44 Open source software notice ... 45 Limited warranty.................... 46 4 770_ENv3_US_UG_9240895.fm Page 5 Tuesday, September 6, 2005 3:57 PM For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless device use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the device off near medical equipment. SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft. SWITCH OFF WHEN REFUELLING Do not use the device at a refueling point. Do not use near fuel or chemicals. SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the device where blasting is in progress. USE SENSIBLY Use only in the normal position as explained in the product documentation. QUALIFIED SERVICE Only qualified personnel may repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. 5 770_ENv3_US_UG_9240895.fm Page 6 Tuesday, September 6, 2005 3:57 PM F o r y o u r s a f e t y WATER-RESISTANCE Your device is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. About your device To access the Internet through a WLAN connection, the access point that your device uses to send and receive data must be compliant with the IEEE 802.11b or 802.11g standard. There may be restrictions on using WLAN in some locations. Check with your local authorities or service provider. Features using WLAN, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life When using the features in this device, obey all laws and respect privacy and legitimate rights of others. Warning: To use any features in this device, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger. Network services Contact your service provider for additional instructions for the use of network services and information on what charges will apply. Some networks may have limitations that affect how you can use network services. Your service provider may have requested that certain features be disabled or not activated in your device. Your device may also have been specially configured. 6 770_ENv3_US_UG_9240895.fm Page 7 Tuesday, September 6, 2005 3:57 PM O v e r v i e w Shared memory The following features in this device may share memory: bookmarks; image, audio, and video files; notes, sketch, and other files; contacts in e-mail address book; e-mail messages; and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many images may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. 1. Overview The Nokia 770 Internet Tablet allows you to navigate the Internet and consume media through a wireless local area network (WLAN) connection or a mobile phone that supports Bluetooth wireless technology. The device also provides a variety of other applications, such as e-mail and an audio player. The Nokia 770 Internet Tablet is supplied with a stylus to control its user interface and reduced-size MultiMediaCard (RS-MMC) for media storage. Read this user guide carefully before using your device. Read also the quick start guide that came with the device, and the user guide of your compatible Nokia phone that provide important safety and maintenance information. This product runs on Linux-based Internet Tablet 2005 software edition. Nokia support on the Web Check www.nokiausa.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product. 7 770_ENv3_US_UG_9240895.fm Page 8 Tuesday, September 6, 2005 3:57 PM G e t s t a r t e d 2. Get started Remove the protective cover The device comes with a cover that provides additional protection to the touch screen. To remove the cover from the device, slide it in the direction of the arrow. To reattach the cover, slide the device inside the cover so that the touch screen remains visible, and the base of the device faces the opening in the cover. Insert the battery 1. Press the button on the battery cover, and slide the cover away from the device (1). 2. Align the golden contacts of the battery with the corresponding connectors on the device, and press the opposite end of the battery into the device (2). 3. Slide the battery cover back onto the device until it clicks into place. Always switch the device off, and disconnect the charger before removing the battery. 8 770_ENv3_US_UG_9240895.fm Page 9 Tuesday, September 6, 2005 3:57 PM G e t s t a r t e d Charge the battery Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the Nokia AC-4 and DC-4 chargers. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. 1. Connect the charger to a wall outlet. 2. Connect the power cord to the charger connector at the base of the device. Do not attempt to connect the power cord to the headset jack to the right of the charging port. Once the power cord is connected, the battery indicator bar starts scrolling on the screen. You can use the device while charging. When the battery is fully charged, the bar stops scrolling. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. For more information, see "Battery information," p. 41. Insert the memory card An RS-MMC and an adapter are supplied with the device. The RS-MMC is physically smaller than a full-size MMC. You can only use FAT 16/32 formatted memory cards with this device. Use only compatible RS-MMCs with this device. Other memory cards, such as secure digital (SD) cards, do not fit in the MMC card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted. 9 770_ENv3_US_UG_9240895.fm Page 10 Tuesday, September 6, 2005 3:57 PM G e t s t a r t e d To insert the memory card, do the following:
1. When the screen is facing down, pull the door of the memory card slot with your fingertip (1), and rotate the door up (2). 2. Insert the memory card so that the beveled corner faces the connectors and the golden contact area faces down. 3. Carefully slide the memory card into the slot until it locks into place (3). 4. To close the door, rotate it back over the memory card slot, and push it into the slot until it snaps into place. You cannot use the memory card if the door is not closed properly. To remove the memory card, open the door of the memory slot, and push the card until it pops out from the slot. Close the door. Your device allows hot swap, which means you can insert and remove a memory card while the device is on without disturbing the system. Important: Do not remove the MMC card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. 10 770_ENv3_US_UG_9240895.fm Page 11 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e Switch the device on or off To switch the device on or off, press and hold the power key. If the device requests a lock code, Enter lock code appears on the screen. Enter the lock code (510 digits) with the on-screen keyboard, and tap OK. To clear an incorrect digit, tap
. By default, the device lock is disabled. The default lock code is 12345. To change the code, or activate the automatic device lock, see "Device lock," p. 20. Note: If you lose the device lock code, you must take the device to a Nokia authorized service facility. To unlock the device, the software needs to be reloaded, and as a result all data you have saved in the device may be lost. 3. Your device Front and top side Your device contains the following keys and parts:
Touch screen (1) To use the device, tap the touch screen with the stylus. 11 770_ENv3_US_UG_9240895.fm Page 12 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e Note: A small number of missing, discolored, or bright dots may appear on the screen. This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.
Power key (2)
Zoom key (3)
Full-screen key (4)
Loudspeaker (5) Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
Scroll key (6)
Escape key (7)
Menu key (8)
Home key (9). For more information, see "Hardware keys," p. 17. Base and right side
Charger connector (1) for the Nokia AC-4 or DC-4 charger.
Mini USB port (2) for the Nokia connectivity cable DKE-2 supplied with the device.
Stereo audio-out connector (3) to plug in compatible headphones with a 3.5-mm plug. The audio-out connector is compatible with 16-ohm or higher impedance headphones. 12 770_ENv3_US_UG_9240895.fm Page 13 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e
Slide the stylus out of its holder (4), where it is stored when it is not in use. Be sure to replace the stylus tip first. Important: Use only a stylus approved by Nokia for use with this device. Using any other stylus may invalidate any warranty applying to the device and may damage the touch pad. Avoid scratching the touch pad. Never use an actual pen or pencil or other sharp objects to write on the touch pad. Touch screen The touch screen consists of the task navigator (1), the application title area (2), the status indicator area (3), the minimize and close buttons
(4), the application area (5), and the toolbar (6). Task navigator The task navigator (1) includes icons that you can tap to open different applications, start new tasks, and access bookmarks. To select an option, tap it with the stylus. Alternatively, scroll to the desired option in a menu, and press the center of the scroll key to open it. To close the menu, press the esc key, or tap another area of the screen. 13 770_ENv3_US_UG_9240895.fm Page 14 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e to open a menu that contains Internet functions, The task navigator contains the following parts:
Web browser Tap such as open a new browser window, access bookmarks, or open the bookmark manager. For more information, see Web browser," p. 29. E-mail Tap to open a menu that contains e-mail functions, such as create a new e-mail message, access contact information, and send and receive e-mail. The appearance of the e-mail application menu depends on the status of the e-mail connection. For more information, see "E-mail," p. 31. Other applications Tap applications, such as media players and viewers, utilities, and games. For more information, see the respective sections in this user guide, and the help of the individual applications. Application switcher The task navigator also contains icons related to the applications that are currently open. The icons of the top four applications are shown on the task navigator, and the rest are listed in a separate menu. To restore one of the four applications, tap the icon of the application. If you hold the stylus down on an icon for half of a second, a tool tip is shown. To access the menu of all open applications, tap
, or press and hold the home key. To open an application, tap the name of it. To return to the home view of the device, select Home. to open a menu that contains other Application title area The application title area (2) displays the name of the active application and the name of the currently open file. Tap the title, or press the menu key to open the application menu. Status indicator area The status indicator area (3) can contain the following icons:
indicates that the device is connected to a PC through an USB cable. indicates the current level of display brightness, and allows you to adjust the display settings. 14 770_ENv3_US_UG_9240895.fm Page 15 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e indicates the current volume level, and allows you to adjust the volume and other sound settings. The more bars the icon contains, the higher the volume. When the sounds are muted, the icon is The Internet connection icons show the status and type of the Internet connection, provides access to the connection manager, and allows you to open and close an Internet connection. indicates that a WLAN connection is active, indicates that a packet data connection (for example, GPRS) is active, a data call connection (for example, GSM) is active, there is no Internet connection, or offline mode where no connections are allowed. indicates that the device is in indicates that indicates that indicates whether the device is in a Bluetooth connection with a phone. It also allows you to change the phone, or open the connection manager. indicates that the device is connected to a compatible mobile phone indicates that the indicates that the phone is not and data is transferring between the two devices, device is not connected to the phone, selected, or connections are allowed. indicates that the device is in offline mode where no indicates how much charge is left in the battery. The more bars the
, the current application is hidden and the underlying icon contains, the more charge is left. Minimize and close buttons The minimize and close buttons (4) let you do the following:
If you tap application is shown. If you tap Application area The application area (5) in the home view shows the functions you selected in the Home menu. To add or remove functions from the application area, tap Home, and mark or unmark the desired function. If you open an application from the task navigator, the application is displayed in the application area.
, the current application closes. 15 770_ENv3_US_UG_9240895.fm Page 16 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e Toolbar The toolbar (6) contains the command buttons of the currently active application. Calibrate the touch screen If the touch screen of the device responds inaccurately, you may need to calibrate it. Press the home key and the menu key, select Screen >
Screen calibration, and follow the instructions on the screen. Home view When you switch on the device, the home view is displayed. The home view contains various functions and shortcuts. To show or hide a function, tap the Home title, and the function name. Internet radio Select an Internet radio channel from the playlist. The contents of the playlist comes from your favorites playlist, which you can edit in the audio player application. For more information, see
"Internet radio," p. 35. Clock Display the current time in digital or analog format. The date format depends on the regional settings. To set the time and date, tap the clock twice, and the application opens. News Show the number of unread news articles and list the latest headlines when you subscribe to a news service. To view an article, tap its headline. To refresh the article list from the Web, tap
. To stop the refresh, tap Web shortcut Select Home > Web shortcut details to set the Web page that opens when you tap the shortcut image. Enter the address of the Web page. To select an image, tap Browse. Functionality of this feature may vary depending on the product package you purchased. To set the background image for the home view, select Home > Screen >
Set background image.... Select an image from the list of default background images, or tap Browse. To personalize the look and feel of your device, select Home >
Screen > Personalization. To calibrate the touch screen, select Home > Screen > Screen calibration. For more information, see "News reader," p. 36. 16 770_ENv3_US_UG_9240895.fm Page 17 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e Device control You can control the device in two ways: tap the screen with the stylus or press the scroll key and other keys on the device. Stylus To open an application, tap an icon in the task navigator. Select the desired function from the menu that appears beside the icon. in the top-right corner of the screen. To close an application, tap
Single tap To activate controls and other interactive interface components, tap them once with the stylus (stylus down and up on the same object). A single tap may open a choice list, activate a button in a dialog or a link on a Web page, select a check box, and activate a text input method from a text field.
Focus and activate To focus an item, tap it once with the stylus. To activate or open the item, tap it again. Use and activate operations on files and other items in list and grid views, for example, to copy documents.
Continuous multiple selection To select consecutive items, place the stylus on a non-focused item, and drag the stylus over the items.
Drag and drop To drag an item, hold the stylus down on a focused item, drag the item to its new location, and release the stylus. To drag and drop multiple items, perform a continuous multiple selection, and start the drag from the focused item.
Context-sensitive menus To activate a context-sensitive menu, hold the stylus down on an item for one second. Hardware keys A key press refers to the press and release of a key. The primary action is performed when you press the key down, and before you release the key. Some actions depend on the length of the key press.
Power key A short key press opens the Device mode dialog. A long key press turns the device on or off.
Zoom key A short key press changes the zoom level of the current view, and adjusts the volume in audio applications. 17 770_ENv3_US_UG_9240895.fm Page 18 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e
Full-screen key A short key press switches between full screen and normal screen modes.
Scroll key A short key press moves the focus from one item to another in the respective direction. A long key press in the Web browser scrolls the content of the active page or frame. Press the center of the scroll key to activate the item that has active focus, and to accept confirmation notes.
Escape key A short key press removes the cursor from text fields, cancels menus and dialogs, and rejects confirmation notes. A long key press closes the topmost dialog or application view. In the Web browser this key acts as a back button.
Menu key A short key press opens and closes the application menu.
Home key A short key press opens the home view of the device. A long key press activates the application switcher. Text input methods You can enter letters, numbers, and special characters in two ways. The on-screen keyboard allows you to tap characters. Handwriting recognition allows you to write characters directly onto the screen using the stylus. To begin text input, tap any text field, or press the center of the scroll key when the text field is focused. The text input area appears on the bottom of the view, and displays the on-screen keyboard or handwriting recognition area, depending on the previously used text input method. To switch between text input methods, tap on the text input area, and select Input method and the desired option. Start writing. To define the text input settings, tap Text input settings. Your device can also complete words based on the selected language. The device has a dictionary for each of the supported text input languages. The device also learns new words from user input. To turn word completion on, select Word completion. To turn word completion off, clear the selection. When word completion is on, the device displays word candidates that match the first characters of the word that you enter with the on-screen keyboard.
, and select Control panel >
18 770_ENv3_US_UG_9240895.fm Page 19 Tuesday, September 6, 2005 3:57 PM On-screen keyboard Y o u r d e v i c e
Tabulator key (1) Add a tabulator space, or move the cursor to the next available text input field.
[ABC] (2) Lock down the uppercase characters of the keyboard. In handwriting recognition, switches between the normal and special character recognition modes.
Shift key (3) Enter an uppercase character in the on-screen keyboard mode, when you write in lowercase. When you press this key in the handwriting recognition mode, the last input lowercase character switches to uppercase, and vice versa.
Input menu key (4) Open the text input menu.
On-screen keyboard (5) Input text.
Space bar (6) Insert a space.
Numeric keyboard (7)
Backspace key (8) Delete the character to the left of the cursor.
Enter key (9) Move the cursor to the next row or text input field. It has additional functions based on the current context (for example, in the Web address field of the Web browser, it acts as a go button).
Special character key (10) Open the special characters view, where you can select from commonly used special characters, symbols, and language characters.
Close (11) Close the on-screen keyboard and handwriting recognition input area, and save changes. 19 770_ENv3_US_UG_9240895.fm Page 20 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e Handwriting recognition You can use the stylus as a pen to write text. Write legible, upright characters, and leave a small horizontal gap between each character. Do not use cursive writing. To write common characters and numbers (default mode), write words as you normally write them. To write special characters, tap [Abc1] in the left pane of the input area, and write the characters as you normally write them. To use handwriting gestures, see the figure. Draw gesture 1 for a backspace;
gesture 2 for a space; gesture 3 for a line change; or gesture 4 for a tabulator. To delete characters, draw the backspace gesture from right to left over the chosen character. To insert new characters in and after words, draw them in the intended positions. Volume control To adjust the master volume, tap to access the sound settings. To decrease or increase the volume, drag the volume slider to the desired position. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Device lock To avoid unauthorized use of your device, change the lock code, and set the device to automatically lock after a certain timeout period. To edit the security settings, tap lock. The Security dialog opens. To turn the automatic device lock on, select Use device lock, enter the lock code, and tap OK. To set the timeout period, tap the Autolock period list, and select the desired time.
, and select Control panel > Device 20 770_ENv3_US_UG_9240895.fm Page 21 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e To change the lock code do the following:
1. Tap Change lock code. Enter the current lock code (the default code is 12345), and tap OK. 2. Enter the new code, and tap OK. 3. Enter the new code again, and tap OK. To enhance security, there is a short delay before OK is available between each step. If you tap Cancel in any of these dialogs, the device lock code is not changed. Keep the new code secret and in a safe place separate from your device. To lock the device with a code, briefly press the power key. In the Device mode dialog, select Lock device > OK. If you have not enabled the Use device lock security settings in the control panel, the Enter lock code dialog opens, and you must enter the code to lock the device. To unlock the device, press the power key, enter the lock code, and tap OK. Note: If you lose the device lock code, you must take the device to a Nokia authorized service facility. To unlock the device, the software needs to be reloaded, and as a result all data you have saved in the device may be lost. Touch screen and key guard To lock the touch screen and keys, briefly press the power key, and select Lock touch screen and keys > OK. To unlock the touch screen and keys, press the power key and the center of the scroll key. The touch screen and key lock is automatically enabled when the protective cover is inserted over the screen of the device, and disabled when the cover is removed. Memory management To view current memory consumption, tap Control panel > Memory.
, and select 21 770_ENv3_US_UG_9240895.fm Page 22 Tuesday, September 6, 2005 3:57 PM Y o u r d e v i c e To view the amount of free and used memory, and the memory consumption of different items on your device or memory card, select the Device or Memory card page. To free memory, delete data in the file manager or other applications. To find and delete files of a certain size, use the Search application. The applications display error messages when you try to move, copy, or save files, and when there is not enough memory on the device or the memory card. Help Your Nokia 770 Internet Tablet offers a device help which provides additional information on the features, applications and dialogs of the device. To access help from the task navigator, tap To access help from an application, tap the application title, and select the help command from the menu (usually under the tools menu). To browse help topics, do the following:
Tap to see other help topics if you have recently viewed
, and select Help. or several help topics. to see a list of recently viewed help topics. to search for the text that you have entered in the search field.
Tap
Tap To access help related to the contents of a dialog (context-sensitive help), tap the ? button on the dialog. Search for information To search for files you created or downloaded, do the following:
1. Tap 2. Enter a search word or multiple search words. The more search words
, and select Search. you use, the more accurate the search results. If needed, limit the search to e-mail messages, contacts, or bookmarks;
or select all files on the device. To set additional search options, tap Options. 3. 22 770_ENv3_US_UG_9240895.fm Page 23 Tuesday, September 6, 2005 3:57 PM A c c e s s t h e I n t e r n e t 4. To start the search, tap OK. Results appear in the Search Results window. 5. To stop the search at any time, tap The search function in your device operates with Boolean AND logic. The more search words and options you set, the more accurate the search results. If you get too few results, limit the number of search words and options. The search function is not case-sensitive. on the toolbar. 4. Access the Internet To access the Internet, you must define the settings of the Internet connection and of the Internet access point through which the connection takes place. To access the Internet, tap on the task navigator, and select a bookmark. The Select connection dialog opens, and the device searches for WLAN networks and lists all available connections. Select a connection from the list, and tap Connect. To access and define the Internet connections manually, tap select Control panel > Connectivity settings > Connections. To create a new or edit an existing connection, tap New or Edit. If you tapped New, the welcome page of the Internet setup wizard is displayed. Tap Next to proceed to the Connection setup: Name and type dialog. To delete a connection, tap Delete.
, and Create a new WLAN connection To set up the WLAN connection manually, do the following:
1. In the Connection setup: Name and type dialog, define the following settings:
Connection name Enter a descriptive name for the connection. Connection type Select WLAN. Tap Next. The device asks whether you want to scan for available WLAN networks. Tap Yes to start the scan, or No to skip it. 23 770_ENv3_US_UG_9240895.fm Page 24 Tuesday, September 6, 2005 3:57 PM A c c e s s t h e I n t e r n e t After the scan, all available WLAN networks are shown with information about each WLAN connection:
Security level of WLAN connection:
No security (for example, a public access point in an airport) Medium security (wired equivalent privacy (WEP) authentication) High security (Wi-Fi protected access (WPA) authentication). The security level of the network affects the settings that are shown when you tap Next.
Name of the WLAN network
WLAN signal strength
, if the WLAN network is already defined for an Internet connection setup that you have saved in the device 2. Tap Finish to save the settings. To define advanced settings, tap Advanced. For more information, see the help on Internet settings. Tip: You may need to define advanced settings if, for example, your Internet access requires the use of proxies. Edit an existing WLAN connection The following settings are shown when you edit an existing WLAN connection or when you skip the scan for WLAN networks:
Network name (SSID): Shows an empty field or the name of the previously defined connection. Network mode Select between Infrastructure and Ad hoc modes. The Infrastructure mode is used with the Internet connections. Security method: Select None (no security), WEP (medium security), WPA pre-shared key (high security), or WPA with EAP (high security). Tip: The device supports wired equivalent privacy (WEP) with key lengths of 40, 104 bits (equal to 64, 128 bits depending on the WLAN access point manufacturer). For example, in the access point, select 40 (64) bits and enter 5 characters. In the device, select correspondingly 40 bits and enter the same 5 characters. 24 770_ENv3_US_UG_9240895.fm Page 25 Tuesday, September 6, 2005 3:57 PM A c c e s s t h e I n t e r n e t Create a new cellular connection Before you can open an Internet connection over a cellular network, you must pair a compatible mobile phone with your device. Your device needs an external modem (phone), which is connected to your device with Bluetooth wireless technology. Bluetooth wireless technology To access the Internet through a cellular network, you must connect your compatible Nokia phone to the Nokia 770 Internet Tablet using Bluetooth wireless technology. This device is compliant with Bluetooth Specification 1.2 supporting the following profiles: Dial-Up Networking, File Transfer/Object Exchange, Generic Access, SIM Access, and Serial Port. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. Features that use Bluetooth technology or allow such features to run in the background while using other features, increase the demand on battery power and reduce the battery life. A Bluetooth connection does not require that the compatible phone and the Nokia 770 Internet Tablet be in line of sight, but both devices should be within 10 meters (32 feet) of each other. Connections can be subject to interference from obstructions, such as walls or other electronic devices. Your device operates always in nondiscoverable and nonconnectable mode, and is not visible to other devices through the Bluetooth connection, unless you create such connection. Do not create connections to Bluetooth devices you do not trust. Pair a phone with your device You must always initiate the pairing of devices from your Nokia 770 Internet Tablet. Although you can only use one phone at a time, you can pair several phones with your device. To pair a phone with your device, do the following:
25 770_ENv3_US_UG_9240895.fm Page 26 Tuesday, September 6, 2005 3:57 PM A c c e s s t h e I n t e r n e t 1. Tap in the status indicator area, and select Select phone.... The selection wizard opens, and your device begins to search for compatible Bluetooth devices. If you have already paired a phone with your device, the menu item is called Change phone.... In that case, select Change phone..., and tap New. 2. Select the desired phone from the list of found devices, and tap Next. Your device generates a passcode. 3. Use the generated passcode or replace it with a passcode of your own. Tap Next, and enter the same passcode on your phone. 4. Tap Finish to save the settings. Tip: Set your Nokia 770 Internet Tablet as a trusted device from the Bluetooth menu of your phone. This way you allow your device to access your phone, and you do not have to confirm the connection every time you activate it. For more information, refer to the user guide of your phone. To change the paired phone, do the following:
1. Tap in the status indicator area, and select Change phone.... The Phone dialog opens, and all paired phones are shown in the Selected phone: list. 2. Select the desired phone, and tap OK. To view information about the currently selected phone, tap Details. To delete the currently selected phone from the list, select Details > Delete. Set up a cellular connection Before you can connect to the Internet over a cellular network, you must have the following:
Subscription to the desired data service from your cellular service provider
Proper Internet settings from your cellular service provider Tip: Your device includes a settings database with predefined settings of some cellular operators. Select your operator from the list, and the settings are installed on your device. To access
, and select Control panel > Control panel >
the database, tap Tools > Mobile operator setup wizard.... 26 770_ENv3_US_UG_9240895.fm Page 27 Tuesday, September 6, 2005 3:57 PM A c c e s s t h e I n t e r n e t Note: All cellular operators and settings are not listed, and some settings may also be out of date. To set up or edit a cellular connection manually, do the following:
1. In the Connection setup: Name and type dialog, define the following settings:
Connection name Enter a descriptive name for the connection. Connection type Select the type of network service over which you want to access the Internet. To use a packet data service in a cellular network, such as GPRS (network service), select Packet data. To use a circuit-switched data service in a cellular network, such as high-speed circuit-switched data (HSCSD; network service), select Data call. In the Select cellular network type dialog, select the type of cellular network over which the Internet connection takes place: GSM/UMTS or CDMA. You must select the network manually, if you have not paired any mobile phone with your device. In the connection setup dialog, define the following settings:
2. 3. Tip: It is common in GPRS packet data networks that the access point name is Internet or it is left blank; the dial-up number is usually *99#; and the user name and the password may be left blank. For CDMA packet data network settings, contact your service provider. Access point name Enter the name of the Internet access point. Obtain the name from your Internet service provider. This setting is shown if you selected packet data connection, and your phone uses a GSM cellular network. Dial-up number Enter the modem telephone number of the Internet access point. User name Enter a user name, if required. The user name is usually provided by the Internet service provider. Password Enter a password, if required. The password is usually provided by the Internet service provider. Prompt password at every login: Select this option if you wish to write a new password every time you log onto an Internet server, or if you do not want to save your password in the device. 27 770_ENv3_US_UG_9240895.fm Page 28 Tuesday, September 6, 2005 3:57 PM A c c e s s t h e I n t e r n e t 4. When you are finished, tap Advanced in the Connection setup:
Complete dialog to define advanced settings, if necessary. For more information, see the help of the application. Connectivity settings When you access an application that requires an Internet connection, you are asked to select the connection (Internet access point) you want to use. In the Select connection dialog, select a connection from the list, and tap Connect. Only available connections are shown. The connection that you set as preferred appears at the top of the list. If you have not set the preferred connection, the last used connection (if available) is shown first.
, and select Control panel >
To define the connectivity settings, tap Connectivity settings. In the General page, define the following settings:
Preferred connection To change the preferred connection, select a connection from the list. Use without asking If you select this option, the Internet access point that you selected in Preferred connection is used automatically when you start an application requiring an Internet connection. In this case, you do not need to confirm the connection. On the Idle times page, select the time after which the Internet connection ends automatically if the connection is not used. Use Packet data idle time for packet-switched data connections (such as GPRS), Data call idle time for circuit-switched data calls (such as GSM data), and WLAN idle time for connections created through a wireless local area network (WLAN) access point. Note: Time-based charges may apply to the Internet connections. Check with your service provider, and adjust the idle times accordingly. Note: The network may also have idle timers that may cause the Internet connection to break, regardless of the idle timers of the device. 28 770_ENv3_US_UG_9240895.fm Page 29 Tuesday, September 6, 2005 3:57 PM W e b b r o w s e r To use a connection automatically, select Control panel > Connectivity settings > General. Set the desired connection as Preferred connection, and select Use without asking. Disable connections To disable WLAN and Bluetooth connections, briefly press the power key, select Offline mode, and tap OK. To enable connections, briefly press the power key, select Normal mode, and tap OK. The WLAN and Bluetooth connections are also disabled when you place the protective cover over the device. Note: In the offline mode, you cannot use features that require network or Bluetooth connection. To use the features, you must first set the device back to normal mode. If the device has been locked, enter the lock code. 5. Web browser
, and select Open new browser window or To open the browser, tap a bookmark. Before you can connect to the Internet, you must define the proper Internet connection settings. For detailed instructions, see "Access the Internet," p. 23. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Browse the Web To open a Web page, tap the address field at the bottom of the screen, and enter the address with the on-screen keyboard. You can also paste an
. address that you have cut or copied from another application. Tap If you saved a bookmark of a Web page that you want to visit, tap
, and select the desired bookmark. 29 770_ENv3_US_UG_9240895.fm Page 30 Tuesday, September 6, 2005 3:57 PM W e b b r o w s e r To browse and scroll a Web page, drag a page in the desired direction with the stylus, use the scroll keys, or drag the scroll bars on the right side and bottom of the screen. To view a page in a larger or smaller size, tap the zoom key. To select a predefined zoom level from the application menu, select Web > View >
Zoom, and the desired zoom level. To view the Web page in full-screen size, press the full-screen key. To return to normal view, press the full-screen key again. To view the Web page in optimized size, select View > Optimized view. The Web page is fit to the width of the screen; text and images are zoomed and scaled differently is necessary. To reload the current page, tap To browse recently visited pages, tap
. To stop loading, tap or
. Note: A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache memory, select Web > Tools > Clear cache.... The cache is also cleared automatically whenever you close the Web browser. To change the Web browser settings, select Web > Tools > Settings.... For more information, see the help of the application. Manage bookmarks To manage the bookmarks you saved in the device, tap Bookmarks. The bookmark folders are shown on the left, and the bookmarks in the selected folder on the right.
, and select Note: Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security and content, as you would with any Internet site. You may not be able to edit or manage the contents of the loaded bookmarks. 30 770_ENv3_US_UG_9240895.fm Page 31 Tuesday, September 6, 2005 3:57 PM E - m a i l To open a folder and a bookmark contained in it, tap the folder, and tap the bookmark twice. To add a bookmark to the current Web page, select Bookmark... >
Web page > Add bookmark.... To save a link as a bookmark, hold the stylus down on the link for a second, and select Add link to Bookmarks.... 6. E-mail To open the e-mail application, tap from the menu.
, and select the desired function Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device. Basic e-mail settings To be able to receive and send e-mail, you must define the settings of the e-mail services you want to use. For appropriate settings, contact the service provider that offers the service. To create a new mailbox, do the following:
1. Tap
, and select Go to Inbox. The mailbox setup wizard opens. If you already have saved settings for a remote mailbox, select E-mail > Tools > New mailbox... to create a new mailbox. 2. Define the following settings:
Mailbox name Enter a descriptive name for your mailbox. Mailbox type Select the e-mail protocol that your e-mail service provider recommends. This setting can be selected only once and cannot be changed after you save the mailbox settings or exit the wizard. Tap Next. Name Enter a name. The name is shown in the sender field of the messages that you send. 31 770_ENv3_US_UG_9240895.fm Page 32 Tuesday, September 6, 2005 3:57 PM E - m a i l User name Enter your user name given to you by your service provider. The user name is needed when you log into your mailbox. Password Enter your password. The password is needed when you log into your mailbox. If you leave this field empty, you are prompted for a password when you try to connect to your mailbox on the e-mail server. E-mail address Enter the e-mail address given to you by your service provider. The address must contain the @. Replies to your messages are sent to this address. Tap Next. Incoming server Enter the host name or IP address of the POP3 or IMAP4 server that receives your e-mail. Outgoing server (SMTP) Enter the host name or IP address of the server through which your e-mail is sent. Tap Next. Simple mail transfer protocol (SMTP) servers are used when sending e-mail. To be able to send e-mail, you must define the SMTP host name or IP address, which you obtain from the service provider of the connection you use. Tip: The SMTP host name or IP address may be different from the host name or IP address of the incoming server (POP3 or IMAP4). For example, once you access your Internet service provider e-mail over a cellular network, you may need to utilize the SMTP server of the cellular network. Thus, you may need to configure as many mailboxes as you have Internet access networks, each mailbox having different SMTP host name or IP address. 3. Tap Finish to complete the mailbox setup or Advanced to define optional e-mail settings. For more information on advanced e-mail settings, see the help of the application. Retrieve and read e-mail E-mail sent to you is not automatically received by your device, but by your remote mailbox on the e-mail server. To read your e-mail, you must first connect to the mailbox and retrieve the e-mail messages to your device. 32 770_ENv3_US_UG_9240895.fm Page 33 Tuesday, September 6, 2005 3:57 PM E - m a i l To retrieve e-mail from a remote mailbox, select E-mail > E-mail >
Send and receive. Select to retrieve e-mail from all mailboxes or from a selected mailbox. If you have e-mail in the outbox folder, these messages are sent simultaneously. To open a message, tap twice the header of the message you want to read. Create and send e-mail 1. Tap the e-mail icon in the task navigator. 2. Tap 3. Write the recipients e-mail address. Add a semicolon (;) to separate multiple recipients. If the recipient is in your personal contacts list, tap select all the recipients, tap OK. Select the recipient from the list, and tap Add. After you to create a new message. 4. Fill in the subject, and write the message. To send the message, tap E-mail scheduling When an Internet connection is active, you can send and receive e-mail messages at scheduled intervals. To define e-mail scheduling settings, do the following:
1. Select E-mail > E-mail > Scheduling.... 2. Select the mailbox for which you want to enable scheduling, and
. tap Edit. 3. To define the start time, end time, and interval of sending and receiving, tap the desired field, and tap the arrows to change the time. If you use the 12-hour clock format, tap the am/pm field. In the Days: field, highlight the weekdays you want the connection to be made. 4. Tap OK to save the settings. Inbox folder The Inbox folder contains received messages. The headers of unread messages are shown in bold. 5. To send a new message, tap
. To reply to a message, tap
. To send a reply to the sender of a message and to the recipients in the CC field, tap
. To send all unsent messages and receive all new messages, tap
. To delete a message, tap
. To forward a message, tap To search for a message, select E-mail > Tools > Search. 33 770_ENv3_US_UG_9240895.fm Page 34 Tuesday, September 6, 2005 3:57 PM E - m a i l Outbox folder Messages waiting to be sent are saved temporarily in the Outbox folder. The status of each message is shown next to the message header:
Waiting The message will be sent the next time you connect to your mailbox. On request The message is sent only if you tap the message and Suspended The sending of the message was canceled using the Cancel sending function. Failed The message could not be sent. To send the selected message again, tap selected message, tap
.To cancel the sending of the
. Sent folder After a message is sent, it is moved to the Sent: folder. To specify the settings of the Sent: folder, select E-mail > Folders >
Folder settings.... Define the following options:
Sent folder clean-up on: Select this option to allow automatic deletion of sent messages. Remove messages older than: Select how often the sent messages are deleted. Select time: Select (days, weeks, or months) how the interval for deletion is measured. Drafts folder In the Drafts folder, you can save unfinished messages or messages that you want to send later. Own folders To create a new folder, select E-mail > Tools > Manage folders.... Tap New, and give a name for the new folder. To delete a folder, tap the folder, and select E-mail > Folders > Delete. 34 770_ENv3_US_UG_9240895.fm Page 35 Tuesday, September 6, 2005 3:57 PM 7. Media players and viewers M e d i a p l a y e r s a n d v i e w e r s Audio player You can listen to music and other audio files stored on your device, compatible mobile phone, or memory card, and listen to audio streams from the Internet. You can also create and manage playlists. Tap
, and select Audio player. The audio player supports the following file formats: AAC, AMR, MP2, MP3, and WAV. The player does not necessarily support all the variations of a file format. Internet radio With the Internet radio you can listen to Internet radio channels or any other compatible audio streams. To add a radio channel to the playlist, do the following:
1. In the Web browser, copy the link of the desired radio channel stream to the clipboard of the device. Hold the stylus down on the link for a second, and select Copy link location. In the home view of the device, tap The audio player application opens. on the Internet radio dialog. 2. 3. Select Audio player > Play list > Add stream... 4. Tap the Web address field, and paste the link of the radio channel stream. Tap OK. 5. Select Audio player > Play list > Save. To listen to a radio channel, select the desired channel from the playlist on the Internet radio dialog, and tap
. To stop listening, tap To adjust the volume, tap the volume control pop-up dialog, tap anywhere outside it.
, and drag the slider with the stylus. To close
. 35 770_ENv3_US_UG_9240895.fm Page 36 Tuesday, September 6, 2005 3:57 PM
, and select Images.
, and select Video player. M e d i a p l a y e r s a n d v i e w e r s Video player You can watch video clips stored on your device, compatible mobile phone, or memory card. You can also watch streaming videos from the Internet. Tap The video player supports the following file formats: AVI, H.263, MPEG-1, MPEG-4, RV (RealVideo), and 3GP. The video player does not necessarily support all the variations of a file format. Images You can view images stored on your device, compatible mobile phone, or memory card. Tap The image viewer supports the following file formats: BMP, GIF, ICO, JPEG, PNG, TIFF, and SVG Tiny. The image viewer does not necessarily support all variations of a file format. News reader You can receive and read RSS news feeds from service providers. The service provider may be a news agency, entertainment site, or an individual who writes an online diary or journal. Tap shown on the left. There may also be predefined folders. To subscribe to a news feed, tap on the application toolbar, and enter or paste the address of the news feed to the Add feed dialog. Obtain the address from the feed providers Web site. Search for a link labeled XML or RSS, and copy the address of that link by using the context-sensitive menu. Hold the stylus down on the link for a second, and select Copy link location. Paste the link to the Add feed dialog. The news reader supports the following file formats: Rich Site Summary, RDF Site Summary, Really Simple Syndication (all are also known as RSS), and Atom. PDF reader You can view documents in portable document format (PDF). Tap and select PDF reader. For more information on how to use the media players and viewers in your device, see the help of each application.
, and select News reader. The news folders you have created are
, 36 770_ENv3_US_UG_9240895.fm Page 37 Tuesday, September 6, 2005 3:57 PM 8. Control panel C o n t r o l p a n e l Control panel allows you to perform configuration and customization
, and select Control panel. A list of available functions tasks. Tap and settings is displayed. For more information, see the help of each function and setting. Application installer This feature is intended for software developers only. It enables installing new applications, viewing installed packages, and uninstalling currently selected packages. Backup/Restore Copy information to a memory card, and restore it to your device. Certificate manager View and manage digital certificates on your device. Connectivity settings Define the preferred wireless connection, and set idle times for all connection types. Create and edit Internet access points. Date & time Select the home city, date, time, and daylight savings time. Device Change the name of your device, and view information about your device and end-user licenses. Display Change the brightness of the display, set the automatic touch screen and keypad lock, and define how soon the display brightness goes down to save power, and how soon the screen is turned off. Language and regional settings - Select your region and device language. Memory View the memory status of the device and the inserted memory card. Personalization Customize the look and feel of the device. Screen calibration Calibrate the touch screen. Device lock Turn on the automatic device lock, set the time-out period, and change the device lock code. Sounds Set the master volume, or mute all device sounds. Select the level of system alerts, keypad sounds, and touch screen sounds. Text input settings Teach the device your handwriting style, set default and alternative text input languages, set character recognition speed, and turn word completion on or off. 37 770_ENv3_US_UG_9240895.fm Page 38 Tuesday, September 6, 2005 3:57 PM T o o l s , u t i l i t i e s , a n d g a m e s To open a function or a setting, tap it once with the stylus. To select the control panel view, select Control panel > View > Large icons to display the application icons as a grid, or select Small icons to display the icons as a list. To restore original factory settings, select Control panel > Tools >
Restore original settings.... This function does not affect content you have created, security codes, passwords, the device language, or game scores. To install connection settings from cellular operator database, select Control panel > Tools > Mobile operator setup wizard... 9. Tools, utilities, and games File manager In File manager, you can move, copy, rename, and open files and folders available in the device, compatible mobile phone, or memory cards inserted in them. Tap and the subfolders and files in them on the right.
, and select File manager. The main folders are shown on the left Connection manager With Connection manager, you can monitor and manage connections
, and select Connection manager. established with the device. Tap Calculator Note: This calculator has limited accuracy and is designed for simple calculations. To access the calculator, tap
, and select Utilities > Calculator. Clock You can set the date and time, select an analog or digital clock and access
, and select Utilities > Clock, or tap language and regional settings. Tap the date and time shown on the right of the screen. 38 770_ENv3_US_UG_9240895.fm Page 39 Tuesday, September 6, 2005 3:57 PM M e m o r y c a r d s a n d P C c o n n e c t i v i t y Notes You can create and save text notes, and send them through e-mail. Tap The notes application supports the following file formats: ascii (plain text with no formatting) and .note.html (formatted text). The application does not support the full .html file format.
, and select Utilities > Notes. Sketch You can draw simple images and send them through e-mail. All the sketches are saved in .png format. Tap
, and select Utilities > Sketch. Games Your device has three games: Chess, Mahjong, and Marbles. To start a game, tap game start-up screen, tap Play. For more information on how to use the tools, utilities and games in your device, see the help of each individual application.
, and select Games and the desired game. In the 10. Memory cards and PC connectivity Memory cards This device supports dual voltage (1.8/3 V) and single voltage (3 V) reduced-size MultiMediaCards. Check the compatibility of an RS-MMC with its manufacturer or provider. You can use a memory card as extra storage space. You can back up information to a memory card and restore it if necessary. Remember to make back-up copies or keep a written record of all important information. To install the memory card, see "Insert the memory card," p. 9. To view and manage the contents of the memory card, tap select File manager. To rename a memory card, select File manager > Memory card > Rename....
, and 39 770_ENv3_US_UG_9240895.fm Page 40 Tuesday, September 6, 2005 3:57 PM M e m o r y c a r d s a n d P C c o n n e c t i v i t y To format a memory card, select File manager > Memory card > Format.... All data is permanently deleted from the memory card. Tap Format. To back up data, select File manager > Tools > Back up/Restore..., and tap Backup. In the Backup selection dialog, change the name of the back-up file; tap the name, and enter a new one. In the Data selection dialog, select whether you want to back up all data or only the specified file types. To protect the back-up file with a password, tap Password protect, enter twice the password you want to use, and tap OK. To restore information, select File manager > Tools > Back up/Restore..., and tap Restore. In the Restore selection dialog, select the back-up file on the memory card that you want to restore. Tap OK and Restore. PC connectivity You can connect your device to a compatible PC with the supplied Nokia connectivity cable DKE-2 (USB). Use the USB cable to transfer files to the memory card. When the USB cable is connected, your Nokia 770 Internet Tablet is listed as a mass storage device on your PC, and is displayed on your device. When the USB cable is connected, you cannot access the information on the memory card with your device. However, you can transfer files from your PC to the memory card, and view the contents of the memory card on your PC. Important: Do not remove the USB cable in the middle of an operation when the device is being accessed. Removing the cable in the middle of an operation may damage the memory card as well as the device, and data stored may be corrupted. When you are finished with file transfer, do not just pull the USB cable from the PC, but follow the proper procedures to disconnect your device from the PC. For more information, see the user guide of your PC. 40 770_ENv3_US_UG_9240895.fm Page 41 Tuesday, September 6, 2005 3:57 PM 11. Battery information B a t t e r y i n f o r m a t i o n Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When operating and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger then disconnect and reconnect it to begin charging the battery. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15C and 25C (59F and 77F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. 41 770_ENv3_US_UG_9240895.fm Page 42 Tuesday, September 6, 2005 3:57 PM B a t t e r y i n f o r m a t i o n Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase. Authenticate hologram 1. When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. 2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively. 3. Scratch the side of the label to reveal a 20-digit code, for example,12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. 42 770_ENv3_US_UG_9240895.fm Page 43 Tuesday, September 6, 2005 3:57 PM C a r e a n d m a i n t e n a n c e 4. Confirm that the 20-digit code is valid by following the instructions at www.nokiausa.com/batterycheck. What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokiausa.com/battery. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.
Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. 43 770_ENv3_US_UG_9240895.fm Page 44 Tuesday, September 6, 2005 3:57 PM A d d i t i o n a l s a f e t y i n f o r m a t i o n
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
Do not paint the device. Paint can clog the moving parts and prevent proper operation.
Use chargers indoors.
Always create a backup of data you want to keep (such as contacts and e-mail messages) before sending your device to a service facility. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position or when positioned at least 1.0 centimeter (3/8 inch) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. In order to transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed. Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with a hearing aid should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. 44 770_ENv3_US_UG_9240895.fm Page 45 Tuesday, September 6, 2005 3:57 PM O p e n s o u r c e s o f t w a r e n o t i c e Open source software notice This product includes certain open source software originating from third parties, which is subject to different and/or additional copyright licenses, disclaimers, acknowledgements, and notices. The source code of such open source software and the exact terms of said licenses, disclaimers, acknowledgements, and notices are reproduced and are available at www.nokia.com/support/770. This product includes certain software originating from third parties that is subject to 1. the GNU Library/Lesser General Public License (LGPL), and 2. the GNU General Public License (GPL). The LGPL, GPL and said certain other licenses are available at www.nokia.com/support/770. You may obtain a complete corresponding machine-
readable copy of the source code of such software under the LGPL and the GPL at www.nokia.com/support/770. Alternatively, Nokia offers to provide such source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping, and handling, upon written request to Nokia at:
Source Code Requests Multimedia Nokia Corporation P.O.Box 407 FIN-00045 Nokia Group This offer is valid for a period of three (3) years from the date of the distribution of this product by Nokia. Please refer to the exact terms of the LGPL and the GPL regarding your rights under said licenses. This software is based in part on the work of the Independent JPEG Group. The Graphics Interchange Format is the Copyright property of CompuServe Incorporated. GIF SM is a Service Mark property of CompuServe Incorporated. This product includes software developed by:
Computing Services at Carnegie Mellon University
(http://www.cmu.edu/computing/) Tommi Komulainen <Tommi.Komulainen@iki.fi>
The Australian National University The OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/)
Gregory M. Christy
Pedro Roque Marques Eric Rosenquist, Strata Software Limited The XFree86 Project, Inc (http://www.xfree86.org/) and its contributors The FreeType Team 45 770_ENv3_US_UG_9240895.fm Page 46 Tuesday, September 6, 2005 3:57 PM L i m i t e d w a r r a n t y Limited warranty For products purchased in the United States of America Nokia Inc. ("Nokia") warrants that this mobile enhancement product or accessory ("Product") is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions:
1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the sale of the Product to the original purchaser ("Consumer") of the Product who purchases it in the United States. It is not assignable or transferable to any subsequent purchaser or user. 2. During the limited warranty period, Nokia will repair, or replace, at Nokia's sole option, defective parts, or parts that will not properly operate for their intended use, with new or refurbished parts if needed because of product malfunction or failure during normal usage. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items including framing and non-operative parts, and expenses related to removing or reinstalling the Product. Nokia does not warrant uninterrupted or error-free operation of the Product. 3. Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:
a) The Product has been subjected to physical abuse, exposure to moisture or dampness, abnormal use, abnormal conditions, improper storage, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, improper installation, shipping damage or other acts which are not the fault of Nokia. b) The product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, or damage caused by software viruses, bugs, worms, Trojan Horses, or cancelbots or by connection to products not recommended for interconnection by Nokia. c) Nokia was not advised in writing by Consumer of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period. d) The Product serial number plate or the accessory data code has been removed, defaced or altered. 46 770_ENv3_US_UG_9240895.fm Page 47 Tuesday, September 6, 2005 3:57 PM L i m i t e d w a r r a n t y 4. If warranty repair is needed, the Consumer should return the Product to the place of purchase for repair or replacement or contact Nokia for instructions for returning the Product. Consumer shall bear the cost of returning the Product to Nokia and shall provide a copy of an itemized receipt showing the date of purchase. Nokia will repair or replace the Product (with the same or similar model) within thirty (30) days after receipt. Nokia may, at its sole option, refund the price paid by Consumer less a reasonable amount for usage. Nokia is not responsible for any loss of data during repair. 5. The Product may contain used components, some of which have been reprocessed. 6. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED. 7. Under no circumstances shall Nokia's liability under this limited warranty exceed the actual cash value of the Product at the time Consumer returns the Product for repair, determined by the price paid by Consumer for the Product less a reasonable amount for usage. 8. Some states do not allow limitation of how long an implied warranty lasts, so the one-year warranty limitation may not apply to you (Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (Consumer). This limited warranty gives Consumer specific legal rights, and Consumer may also have other rights which vary from state to state. 47 770_ENv3_US_UG_9240895.fm Page 48 Tuesday, September 6, 2005 3:57 PM L i m i t e d w a r r a n t y 9. Nokia neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty. This is the entire warranty between Nokia and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, relating to the Product, and no representation, promise or condition not contained herein shall modify these terms. This limited warranty allocates the risk of failure of the Product between Consumer and Nokia. The allocation is recognized by Consumer and is reflected in the purchase price. 10. Any claim or dispute relating in any way to this limited warranty, including allegations of product defect, shall be submitted to final, binding arbitration before the American Arbitration Association pursuant to its Wireless Industry Arbitration Rules. Any action for breach of warranty must be commenced within eighteen (18) months of purchase of the Product. 11. Any claim or dispute relating in any way to this limited warranty, including allegations of product defect, shall be submitted to final, binding arbitration before the American Arbitration Association pursuant to its Wireless Industry Arbitration Rules. Any action for breach of warranty must be commenced within eighteen (18) months of purchase of the Product. 12. Questions concerning this limited warranty may be directected to:
Nokia Inc. Telephone: 1-888-NOKIA-2U (1-888-665-4228) Facsimile: (813) 249-9619 TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542) Website: www.nokiausa.com/support 48
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-08-26 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-08-26
|
||||
1 | Applicant's complete, legal business name |
Microsoft Corporation
|
||||
1 | FCC Registration Number (FRN) |
0005087978
|
||||
1 | Physical Address |
1 Microsoft Way
|
||||
1 |
Redmond, Washington 98052
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@atcb.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
LJP
|
||||
1 | Equipment Product Code |
SU-18
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
H****** S******
|
||||
1 | Title |
Director, EMC, SI and RF Compliance
|
||||
1 | Telephone Number |
1-425********
|
||||
1 | Fax Number |
1-425********
|
||||
1 |
h******@microsoft.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Nokia Corporation
|
||||
1 | Name |
K******** O******
|
||||
1 | Physical Address |
Elektroniikkatie 10
|
||||
1 |
OULU, 90800
|
|||||
1 |
Finland
|
|||||
1 |
k******@nokia.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Internet Tablet w/ WLAN/BT | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is conducted. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The SAR data in this filing is applicable to demonstrate compliance in the host device only as shown in this filing. The highest SAR value for this device as reported to the FCC is: Body; 0.58 Watts/kg. This device contains a Bluetooth transmitter. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
TCC Microsoft Salo
|
||||
1 | Name |
K**** H********
|
||||
1 | Telephone Number |
35871********
|
||||
1 | Fax Number |
45-33********
|
||||
1 |
k******@microsoft.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412 | 2462 | 0.161 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 2402 | 2480 | 0.001 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC