FCC ID: LJPNPM-6X PCS Band GSM Cellular Transceiver

 

1 Safety first Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual. Safety first Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Don't use a hand-held phone while driving. INTERFERENCE All wireless phones may get interference, which could affect performance. SWITCH OFF IN HOSPITALS Follow any regulations or rules. Switch the phone off near medical equipment. SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. SWITCH OFF WHEN REFUELING Don't use the phone at a refuelling point. Don't use near fuel or chemicals. SWITCH OFF NEAR BLASTING Don't use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules. USE SENSIBLY Use only in the normal position. Don't touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel may install or repair phone equipment.

[ 1 DRAFT ]

OBSERVE INFRARED PRECAUTIONS Do not point the IR beam at anyones eyes or allow it to interfere with other IR devices. ACCESSORIES AND BATTERIES Use only approved accessories and batteries. Do not connect incompatible products. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user's guide for detailed safety instructions. Do not connect incompatible products. BACKUP COPIES Remember to make backup copies of all important data. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. CALLING Ensure the phone is switched on and in service. Enter the phone number, including the area code, then press the Talk key. To end a call, press the End key. To answer a call, press the Talk key. EMERGENCY CALLS Ensure the phone is switched on and in service. Press the End key as s many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the emergency number, then press the Talk key. Give your location. Do not end the call until told to do so. ABOUT ACCESSORIES Check the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-12 and LCH-12.

[ 2 DRAFT ]

Safety first Warning: Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous. For availability of approved accessories, please check with your dealer. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

[ 3 DRAFT ]

2 An overview of functions MULTIMEDIA MESSAGING SERVICE (MMS) Your phone is able to send and receive multimedia messages made up of text and pictures. You may also be able to receive polyphonic ringing tones. You can also save pictures and ringing tones to personalize your phone. See Multimedia Messages on page70 for more information. This feature uses shared memory. Please see Shared memory on page15 for more information. POLYPHONIC SOUND (MIDI) Polyphonic sounds are used in ringing tones and message alert tones. They consist of several sound components played at the same time, like an actual melody through a speaker. Your phone has sound components from over 40 instruments that can be used for polyphonic sounds and the phone can play four instruments simultaneously. The phone supports Scalable Polyphonic MIDI (SP-MIDI) format. You can receive polyphonic ringing tones via multimedia service,

(see Read and reply to a multimedia message on page74), or download them via the gallery menu, see Gallery (Menu 7) on page113 for more information. GENERAL PACKET RADIO SERVICE (GPRS) GPRS technology allows mobile phones to send and receive data over a mobile network. Applications such as WAP, MMS, text messaging, and JavaTM use GPRS. Your phone supports up to three simultaneous GPRS connections. For more information on GPRS, see GPRS on page137. Also, consult the PC Connectivity Guide. The PC Connectivity Guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia.com.

[ 4 DRAFT ]

An overview of functions Before you can use GPRS technology Contact your network operator or service provider for availability and subscription to the GPRS service. Save the GPRS settings for each of the applications used over GPRS. PRICING FOR GPRS AND APPLICATIONS Your wireless provider may charge for GPRS services. For more information on pricing, contact your wireless provider. SPEAKERPHONE To activate the speakerphone, press Loudsp. To deactivate the speakerphone during a call, press Handset. You can use your phone as a speakerphone during a call. The speakerphone deactivates automatically when you end the call, attempt to make a new call, or when you connect a headset. FLASHLIGHT There is a flashlight in your phone. You can activate it while in standby mode when the keypad is not locked. To activate the flashlight, press and hold the up scroll key. To switch off the flashlight, release the scroll key. To have the flashlight on continuously, quickly press the up scroll key twice. To switch it off again, press the up scroll key once. JAVATM APPLICATIONS Your phone supports JavaTM and includes some Java applications and games that have been specially designed for mobile phones. You may be able to download new applications and games to your phone from a PC with Java installer software or from some Mobile Internet services. See Applications (Menu 10) on page124 for more information.

[ 5 DRAFT ]

This feature uses shared memory. Please see Shared memory on page15 for more information. FM STEREO RADIO Your phone has an integrated FM stereo radio. You can listen to the radio through a headset or the handsfree speaker (with the headset attached). See Radio (Menu 6) on page110 for more information.

[ 6 DRAFT ]

Welcome and quick guide 3 Welcome and quick guide Congratulations on your purchase of the Nokia 5100 mobile phone. Your phone provides many functions which are practical for daily use, such as a Calendar, Radio, Alarm clock, Calculator, and more. A variety of Xpress-onTM color shells are also available. Your phone can also connect to a PC, laptop, or other device using the data cable or built-in IR port. For more information on connectivity, refer to the PC Connectivity Guide. The PC Connectivity Guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia.com. Improved durability The Nokia 5100 phone has been designed for an active lifestyle. It is a phone with enduring quality and reliability. It has an improved protection against water splashes, dust, and bumps. The rubbery surface and ergonomic shape provide a firm and reliable grip and convenience. The top and bottom shells provide improved protection against water splashes and dust. Also the inner module including the bottom connector has resistance to splashes and dust when the shells and key mat are mounted. There are membranes and gaskets to give protection for inner parts. The phone has improved durability to protect against accidental bumps

(e.g. if phone drops from your pocket or desk). The bottom flap gives extra protection for the connectors against knocks and dirt. GET THE MOST OUT OF THIS GUIDE The tips that follow can help you get the most from this guide as you learn to use your phone.

[ 7 DRAFT ]

Learn text conventions This user guide provides text clues to help make instructions clear and easy to follow. These clues are called conventions. Convention What it means bold The word or phrase appears on the phones display bold and blue The text refers to an address on the world wide web italics Indicates emphasis. Pay close attention to any information in italics Follow graphic clues This guide uses certain icons to alert you to important information. Tip: Indicates a shortcut or alternate method of doing something. Note: Explains a feature or points out an important concept. Important:Indicates critical information on using a feature. Caution: Warns when you may lose information. Warning:Helps you avoid personal injury, damage to the phone, or property damage. Access alternate formats This user guide is available in alternate formats, contact Nokia at www.nokiaaccessibility.com or call 1-888-665-4228 for more information. Look for updates From time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com. Also, an interactive tutorial may be available at www.nokiahowto.com.

[ 8 DRAFT ]

Welcome and quick guide UNDERSTAND WIRELESS NETWORK SERVICES The wireless phone described in this guide is approved for use on the GSM 900, GSM 1800, and GSM 1900 networks. A number of features included in this guide are called Network Services. These are special services you arrange through your wireless service provider. Before you can take advantage of any of these Network Services, you must subscribe to them through your service provider and obtain instructions for their use from your service provider. Some networks may not support all language-dependent characters and/

or services. REGISTER YOUR PHONE Make sure to register your phone at www.warranty.nokiausa.com or 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should need to call the center or have your phone repaired. E-NEWSLETTERS When you register your phone, you can sign up for Nokia's e-newsletter, Nokia Connections, if you would like. You will receive tips and tricks on using your phone, accessory information, and special offers.

[ 9 DRAFT ]

UNDERSTAND YOUR PHONE IR Port Power key Earpiece

Volume keys

Left select key Talk key Number keys Display screen Right select key End key 4-way scroll keys Charger jack Pop-PortTM connector Microphone

[ 10 DRAFT ]

Welcome and quick guide Use the antenna Your phone has a built-in antenna. As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimizes the antenna performance and the talk time of your phone. Use the battery CHARGE THE BATTERY 1 Plug the charger transformer in to a standard AC outlet. 2 Insert the charger output jack into the round connector at the bottom end of the phone. After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely flat, it may take a few minutes before the charging indicator appears on the display or any calls can be made. Tip: You can use the phone while the charger is connected.

[ 11 DRAFT ]

IMPORTANT BATTERY INFORMATION Important:Your phone is powered by a rechargeable battery. Use only batteries approved by Nokia and recharge your battery only with the chargers approved by Nokia. Never use any charger or battery which is damaged. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery. PROLONG THE BATTERY Use the following guidelines to obtain the best performance from your battery:

With your phone turned off, charge your new battery for three hours before its first use. Use the battery until it is fully discharged. Repeat this procedure twice for a total of three charging cycles. Note that a new battery's full performance is achieved only after two or three complete charge and discharge cycles. Battery operation time may be less than the estimated times during the first charges. This condition is normal. You can use your phone while the battery is charging. However, if the battery is completely empty, it may need to recharge a few minutes before you can make or receive calls or the battery indicator appears. After the first charge, you can make and receive calls during the charging cycle, but the calls interrupt the charge. When the phone call ends, the charge will resume. The bars on the screen stop scrolling and remain constant when the phone is fully charged. If you leave the phone connected to the charger, the battery receives an additional charge. If you switch the phone on when charging is complete, the message Battery full momentarily appears in the display. Note: The battery will accept a "trickle charge" for an additional two hours.

[ 12 DRAFT ]

Welcome and quick guide 2 1 REMOVE THE LOWER SHELL 1 With the back of the phone facing you, push the lower shell release indentions. 2 Slide the bottom of the shell to remove. REMOVE THE BATTERY 3 After youve removed the lower shell, grasp the removal flap and gently pull; the battery lifts from its compartment. Install the SIM card Warning: Keep all miniature SIM cards out of the reach of small children. The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting or removing the card. Before installing the SIM card, always make sure that the phone is switched off and that youve removed the shell and battery. 1 Slide the SIM card holder toward the bottom end of the phone until it unlocks. 2 Swing the SIM card holder open. 1

[ 13 DRAFT ]

3 Insert the SIM card into the holder,

(beveled corner last) and the gold contacts facing toward the top end of the phone. 3 4 Close the SIM card holder. 4 5 5 Slide the SIM card holder toward the top end of the phone until it locks into place. REPLACE THE BATTERY The SIM card must be installed before installing the battery. 1 Position the battery so the gold contacts match up with those on the phone. The battery label should be facing away from the phone. 2 Insert the battery, contact end first into the battery slot. 3 Snap the other end of the battery into place and snap the back of the phone closed.

[ 14 DRAFT ]

Welcome and quick guide REPLACE THE LOWER SHELL 1 Place the phone into the lower shell. 2 Slide the shell forward until it clicks into place. Shared memory The following features in your phone use shared memory: Phone book, text and multimedia messages, images and ringing tones in gallery, calendar and to-do notes, and Java TM games and applications. Using any of these features leaves less memory for other features. This is especially true with heavy use of any of the features. For example, saving many images may take all of the shared memory and your phone may display that the memory is full. In this case, delete some of the information or entries reserving the shared memory. The following functions use shared memory that is dependent on the data quantity per item and shared memory available at a time in the Nokia 5100. Phone book (up to 300 entries) SMS messages (up to 150 text messages or 50 picture/concatenated messages) Calendar notes (up to 250 entries) To-do list (up to 30 entries) Fixed ring tones (11 preset, not removable) The following features share a memory pool of 725kB:

MMS messages (max size of 30kB per MMS message) Ring tones in Gallery (20 preset, all removable) Images (10 preset, all removable) JavaTM applications (3 preset, max download size 64kB per application)

[ 15 DRAFT ]

The following functions use static memory:

WAP cache (up to 20 entries) WAP bookmarks (up to 30 entries) WAP security cache and certificates (up to 20 entries) GET HELP Information label Find your phones label If you need help, Nokia Customer Care is available for assistance. Before calling, however, please read Frequently Asked Questions on page162. We also recommend that you write down the following information and have it available if you call. The information can be found on back of the phone, beneath the battery. We also ask that you write down your zip code. The International Mobile Equipment Identifier (IMEI)

[ 16 DRAFT ]

Welcome and quick guide Contact Nokia Please have your phone or accessory with you when contacting either of the numbers below. Nokia Customer Care Center, USA Nokia, Inc. 7725 Woodland Center Boulevard Suite #150 Tampa, Florida 33614 Tel: 1-888-NOKIA2U (1-888-665-4228) Fax: 1-813-249-9619 TTY: 1-800-24NOKIA (hearing impaired only)

(1-800-246-6542) Customer Interaction Center, Canada Nokia Products Ltd. 601 Westney Road South Ajax, Ontario L1S 4N7 Tel: 1-888-22NOKIA

(1-888-226-6542) Fax: 1-905-427-1070

[ 17 DRAFT ]

GET STARTED WITH THE QUICK GUIDE Enter phone number, press the talk key Make a call Press Answer or the talk key Answer a call Answer a call with a Press the talk key or Options and select Answer call call waiting End a call Ignore a call Redial last number Adjust call volume Use the in-call menu Use 1-touch dialing Save a name and number Press the end key Press Silence when your phone rings Press the talk key twice Press up or down on the side volume key While in a call, press Options Press and hold any key 2 through 9 Enter a number, press Options, and select Save, then enter a name and press OK Press Names, select Find. Enter name and press Find or List Press and hold the 1 key OR dial your voice mailbox number Press Menu 01-1-1. After a pause, write the message. Press Options, scroll to Send, press Select, enter the recipients number, press OK Press Menu 01-1-2. After a pause, enter the recipients e-mail address. Press OK, enter a subject, and press OK. Write your e-mail message, press Options, scroll to Send e-mail and press Select. Enter the e-mail server number if necessary and press OK. Your e-mail is sent. Press Show, then press Select Press Options, select Reply, write the reply, press Options, select Send, and press OK Press Options, scroll to Reply, and press Select. Compose your message and press Options. Scroll to Sending options and press Select. Scroll to Sending profile and press Select. Highlight your email profile and press Select. Press Options, Accept, enter the e-mail address, press OK. Recall a name from the phone book. Press Details, then press Options, scroll to Send bus. card, scroll to Via text message and press Select. Enter the recipients number or press Find to retrieve a number from the Phone book. Press OK . The business card is sent.

[ 18 DRAFT ]

Recall a name/number Check voice mail Write and send a text message Write and send an E-mail message Read a new message Reply to a message Reply to an E-mail message Send a business card MENU SHORTCUTS To access a menu or item, press Menu, then enter the numbers associated with the desired menu or item. For example, press Menu 2-2-1 to view any Missed calls. 1 MESSAGES Text messages. 01-1 Multimedia messages. 01-2 Chat. 01-3 Voice messages. 01-4 Info messages. 01-5 Message settings . 01-6 Service commands . 01-7 2 CALL LOG Missed calls. 2-1 Received calls . 2-2 Dialed numbers. 2-3 Delete recent call lists . 2-4 Call timers. 2-5 Call costs . 2-6 GPRS Data counter. 2-7 GPRS Connection timer . 2-8 3 PROFILES Normal . 3-1 Silent. 3-2 Meeting. 3-3 Outdoor. 3-4 Pager . 3-5 4 SETTINGS Time and date settings. 4-1 Call settings . 4-2 Phone settings . 4-3 Display settings . 4-4 Tone settings. 4-5 Accessory settings . 4-6 Security settings. 4-7 Welcome and quick guide Restore factory settings . 4-8 5 ALARM CLOCK 6 RADIO 7 GALLERY 8 ORGANIZER Calendar. 8-1 To-do list . 8-2 9 GAMES Select game. 9-1 Game downloads. 9-2 Memory . 9-3 Settings . 9-4 10 APPLICATIONS Select application . 10-1 App. downloads. 10-2 Memory . 10-3 11 EXTRAS Calculator . 11-1 Countdown timer . 11-2 Stopwatch . 11-3 Calorie counter . 11-4 Thermometer . 11-5 Sound meter . 11-6 12 CONNECTIVITY Infrared . 12-1 GPRS. 12-2 13 SERVICES Home . 13-1 Bookmarks . 13-2 Service inbox . 13-3 Settings . 13-4 Go to address. 13-5 Clear the cache . 13-6

[ 19 DRAFT ]

Voice mail and voice privacy Call waiting, call forwarding, and caller ID Contact your service provider To use the network services available in your phone, youll need to sign up with a wireless provider. In many cases, the wireless provider will make available descriptions of their services and instructions for using features such as:

Messaging News and information services Wireless providers may differ in their support of features. Before you sign up, make sure a wireless provider supports the features that you need. Receive accessibility information Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information, visit the Nokia World Wide Web site www.nokiaaccessibility.com. Selected Internet services

[ 20 DRAFT ]

Welcome and quick guide SWITCH YOUR PHONE ON OR OFF Warning:Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. 1 To turn your phone on or off, press and hold the power key on top of the phone for at least 3 seconds. If the phone displays Insert SIM card even though the SIM card is properly inserted, or SIM card not supported, contact your wireless provider. 2 Enter the PIN code if necessary and press OK. 3 Enter the security code if necessary and press OK. Note: If the language that appears in your display is not correct, see Set the display language on page100 for information on changing your phones display language.

[ 21 DRAFT ]

CHECK THE START SCREEN The Start screen is home base and indicates your phone is in idle mode.

[ 22 DRAFT ]

Whats on the Start screen Welcome and quick guide Signal strength Menu Battery level Names HOME Your wireless providers name may appear here Signal strength A higher bar indicates a stronger network signal Battery level A higher bar indicates more power in the battery Understand indicators and icons Icon Indicates... You have one or more text or picture messages. See Reply to a message or e-mail on page69 You have one or more multimedia messages. See Read and reply to a multimedia message on page74 You have one or more voice messages. See Voice messages on page76 Your phones keypad is locked, see Lock the keypad

(Keyguard) on page43 Your phone is set to the Silent profile. Profiles (Menu 3) on page91 The alarm clock is set to On. See Alarm clock (Menu 5) on page108

[ 23 DRAFT ]

Icon

, or Indicates... The countdown timer is running. See Use the countdown timer on page129 The stopwatch timing is running in the background, see Use the stopwatch on page130 A GPRS dial-up connection is established, see GPRS dial-up connections on page138 You have an incoming or outgoing call during a GPRS dial-up connection. GPRS is suspended IR connection indicator, see Infrared on page136 and for line 2 Forward all voice calls. All calls are forwarded to another number. If you have two phone lines, the indicator for line 1 is If you have two phone lines, indicates that you are on the 2nd phone line. See Phone settings on page100 Integrated handsfree is active, see Speakerphone on page5 Calls are limited to a closed user group; see Closed user groups on page48 The timed profile is selected, see Profiles (Menu 3) on page91 A headset, handsfree or loopset accessory is connected to the phone

[ 24 DRAFT ]

USE THE SELECTION AND SCROLL KEYS Welcome and quick guide Left select Right select Below each corner of the display are the selection keys. Press the left selection key when Menu appears above it to show the first of numerous menus. Page through the rest of the menus using the up and down scroll keys. Press the right selection key when Names appears above it to enter the Phone book. Tip: Press an up or down scroll key from the Start screen to view any entries in your Phone book. Use four-way scrolling In features, such as the calendar monthly view, text messages, and special characters, you can move the cursor up and down as well as left and right. To move the cursor:

Left, press the left scroll key Up, press the up scroll key Down, press the down scroll key Right, press the right scroll key BROWSE PHONE MENUS Your phone's features are grouped according to function and are accessed through your phone's main menus. Each main menu contains submenus and lists from which you can select or view items, and customize your phone's features. You can access these menus and submenus by using the scroll method or by using a shortcut. Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.

[ 25 DRAFT ]

Use the scroll method 1 At the Start screen, press Menu, then scroll through the main menus using the up and down scroll keys. As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the menu number is a scroll bar with a tab. The tab moves up or down as you scroll through the menus, providing a visual representation of your current position in the menu structure. 2 When you arrive at a menu, press Select (the left selection key) to enter that menus submenus. Press Exit (the right selection key) to return to the previous menu Press the end key to return to the Start screen from any menu or submenu. Use a shortcut You can go directly to almost any menu or submenu, as well as activate most features by using a shortcut. Press Menu, then within 3 seconds, press the key or keys associated with the menu function youd like to view or activate. For example, to select the Meeting profile, press Menu 3-3-1 from the Start screen (Menu - 3Profiles - 3Meeting - 1Select). After a brief pause, the Meeting profile is activated. A complete list of shortcuts begins on the following page. Check in-phone help Many features have brief descriptions (help text) which can be viewed on the display. To view these descriptions, scroll to a feature and wait for about 10 seconds. Press More to view all of the description (if necessary), or press Back to exit.

[ 26 DRAFT ]

Welcome and quick guide ACTIVATE OR DEACTIVATE HELP TEXT 1 At the Start screen, press Menu 4-3-7 (Settings > Phone settings >

Help text activation). 2 After a brief pause, On and Off appear in the display. 3 Scroll to On or Off and press Select. A confirmation message appears in the display indicating your selection.

[ 27 DRAFT ]

Menu shortcuts 1 MESSAGES To access a menu or item, press Menu, then enter the numbers associated with the desired menu or item. For example, press Menu 2-2-1

(Call log - Missed calls) to view any Missed calls. TEXT MESSAGES . 01-1 Create message. 01-1-1 Create e-mail . 01-1-2 Inbox . 01-1-3 Sent items . 01-1-4 Archive . 01-1-5 Templates . 01-1-6 My folders . 01-1-7 Delete messages . 01-1-8 MULTIMEDIA MSGS . 01-2 Create message. 01-2-1 Inbox . 01-2-2 Outbox. 01-2-3 Sent items . 01-2-4 Saved items . 01-2-5 Delete messages . 01-2-6 CHAT . 01-3 VOICE MESSAGES . 01-4 Listen to voice messages . 01-4-1 Voice mailbox number . 01-4-2 INFO MESSAGES . 01-5 Info service . 01-5-1 Topics. 01-5-2 Language. 01-5-3 Info topics saved on SIM card . 01-5-4 Read (if received only). 01-5-5 MESSAGE SETTINGS . 01-6 Text messages . 01-6-1 Multimedia msgs. . 01-6-2 Other settings . 01-6-3 SERVICE COMMANDS . 01-7 2 CALL LOG MISSED CALLS . 2-1 RECEIVED CALLS . 2-2 DIALED NUMBERS . 2-3 DELETE RECENT CALL LISTS. 2-4 All . 2-4-1 Missed . 2-4-2 Received . 2-4-3 Dialed . 2-4-4 CALL TIMERS . 2-5 Duration of last call. 2-5-1 Duration of dialed calls . 2-5-2 Duration of received calls . 2-5-3 Duration of all calls . 2-5-4 Clear timers . 2-5-5 CALL COSTS . 2-6 Last call units. 2-6-1 Units of all calls. 2-6-2 Call cost settings . 2-6-3 GPRS DATA COUNTER . 2-7 Data sent in last session . 2-7-1 Data received in last session. 2-7-2 All sent data . 2-7-3 All received data . 2-7-4 Clear counters . 2-7-5 GPRS CONNECTION TIMER . 2-8 Duration of last session . 2-8-1 Duration of all sessions. 2-8-2 Clear timers . 2-8-3

[ 28 DRAFT ]

Welcome and quick guide Auto-update of date & time . 4-1-3 CALL SETTINGS . 4-2 Automatic volume control

. 4-2-1 Call forwarding . 4-2-2 Anykey answer . 4-2-4 Automatic redial . 4-2-4 Speed dialing . 4-2-5 Call waiting . 4-2-6 Summary after call . 4-2-7 Send my caller identity . 4-2-8 Line for outgoing calls1 . 4-2-9 PHONE SETTINGS . 4-3 Language. 4-3-1 Automatic keyguard . 4-3-2 Cell info display. 4-3-3 Welcome note . 4-3-4 System selection . 4-3-5 Confirm SIM service actions. 4-3-6 Help text activation . 4-3-7 Start-up tone . 4-3-8 DISPLAY SETTINGS. 4-4 Wallpaper . 4-4-1 Color schemes . 4-4-2 Screen saver timeout . 4-4-3 Operator logo . 4-4-4 Display brightness. 4-4-5 TONE SETTINGS . 4-5 Ringing options. 4-5-1 Ringing tone . 4-5-2 Ringing volume . 4-5-3 Vibrating alert. 4-5-4 Message alert tone . 4-5-5 Keypad tones . 4-5-6 Warning tones. 4-5-7 3 PROFILES NORMAL 3-1 Select . 3-1-1 Customize . 3-1-2 Ringing options. 3-1-2-1 Ringing tone . 3-1-2-2 Ringing volume. 3-1-2-3 Vibrating alert . 3-1-2-4 Message alert tone . 3-1-2-5 Keypad tones. 3-1-2-6 Warning tones . 3-1-2-7 Alert for. 3-1-2-8 Timed. 3-1-3 SILENT . 3-2 Select . 3-2-1 Customize . 3-2-2 Ringing options. 3-2-2-1 Ringing tone . 3-2-2-2 Ringing volume. 3-2-2-3 Vibrating alert . 3-2-2-4 Message alert tone . 3-2-2-5 Keypad tones. 3-2-2-6 Warning tones . 3-2-2-7 Alert for. 3-2-2-8 Profile name . 3-2-2-9 Timed. 3-2-3 Submenus for Meeting, Outdoor, and Pager are the same as Silent MEETING . 3-3 OUTDOOR . 3-4 PAGER . 3-5 4 SETTINGS TIME AND DATE SETTINGS . 4-1 Clock . 4-1-1 Date. 4-1-2 1 For availability, contact your wireless provider.

[ 29 DRAFT ]

Alert for. 4-5-8 ACCESSORY SETTINGS . 4-6 Headset . 4-6-1 Default profile . 4-6-1-1 Automatic answer. 4-6-1-2 Loopset . 4-6-2 Use loopset . 4-6-2-1 Automatic answer. 4-6-2-2 Automatic answer. 4-6-2-3 SECURITY SETTINGS . 4-7 PIN code request. 4-7-1 Call restrictions. 4-7-2 Fixed dialing . 4-7-3 Closed user group. 4-7-4 Security level. 4-7-5 Access codes . 4-7-6 RESTORE FACTORY SETTINGS . 4-8 5 ALARM CLOCK 6 RADIO OPTIONS . 6-1 7 GALLERY 8 ORGANIZER CALENDAR . 8-1 TO-DO LIST . 8-2 9 GAMES SELECT GAME . 9-1 GAME SERVICES . 9-2 MEMORY . 9-3 SETTINGS . 9-4 Game sounds . 9-4-1 Game lights . 9-4-2 Shakes . 9-4-3 10 APPLICATIONS SELECT APPLICATION . 10-1 APP. DOWNLOADS. 10-2 MEMORY . 10-3 11 EXTRAS CALCULATOR . 11-1 COUNTDOWN TIMER . 11-2 STOPWATCH . 11-3 CALORIE COUNTER . 11-4 THERMOMETER . 11-5 SOUND METER. 11-6 12 CONNECTIVITY INFRARED . 12-1 GPRS . 12-2 GPRS modem settings . 12-2-1 GPRS connection. 12-2-2 13 SERVICES HOME . 13-1 BOOKMARKS . 13-2 SERVICE INBOX . 13-3 SETTINGS . 13-4 Active service settings. 13-4-1 Edit active service settings . 13-4-2 Appearance settings . 13-4-3 Cookie settings . 13-4-4 Authority certificates . 13-4-5 Service inbox settings. 13-4-6 GO TO ADDRESS . 13-5 CLEAR THE CACHE . 13-6

[ 30 DRAFT ]

Basic operations 4 Basic operations SET THE CLOCK Before many functions such as call timers and other features will operate properly, you need to set the clock. 1 At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted. 2 Scroll to Set the time and press Select. 3 Enter the time (in hh:mm format) and press OK. 4 Scroll to am or pm and press Select. The time is set. MAKE AND ANSWER CALLS Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Use the keypad 1 Enter the phone number (including the area code), and press the talk key. To delete a character to the left of the cursor, press Clear. 2 Press the end key to end the call or to cancel the call attempt. Use the phone book 1 At the Start screen, press the up or down scroll key and scroll to the entry you wish to view. 2 Press the talk key to make the call or press Details to view details of

[ 31 DRAFT ]

the entry. Tip: To quickly search the list of entries in your Phone book, press any key in which the letters match the first letter of the name for which youre searching. Answer or reject an incoming call Press the Talk key to answer the call Press the end key to reject the call; the call is diverted to your voicemail If you press Silence, only the ringing tone is muted. You can then either answer or reject the incoming call. Tip: If the HDB-4 or HDS-3 headset is connected, you can answer or end a call by pressing the key on the headset. Answer a call with the keypad locked To answer a call with keyguard on, simply press the talk key. During the call, all features function as normal. When you end or reject the call, the keypad automatically re-locks. Note: When Keyguard is on, calls may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press the talk key. The number is displayed only after you have keyed in its last digit. Redial the last number 1 At the Start screen, press the talk key to display the last 20 numbers you have dialed. 2 Press the talk key to redial the last number, or scroll to the number

(or name) you wish to redial and press the talk key.

[ 32 DRAFT ]

Adjust the earpiece volume To increase the volume of a call, press the volume up key on the left side of the phone. To decrease the volume of a call, press the volume down key on the left side of the phone. When adjusting the volume, a bar chart appears in the display indicating the volume level. Basic operations Volume key CALL AND SETUP YOUR VOICEMAIL 1 Once youve saved the voice mailbox number, press and hold the 1 key. 2 When you connect and the pre-recorded greeting begins, follow the automated instructions to setup your voicemail. Listen to your voice messages Once youve setup voicemail, you can dial the number one of 3 ways:

Dial the number using the keypad Press and hold the 1 key Press Listen if theres a notification message in the display When you connect and the pre-recorded greeting begins, follow the automated instructions to listen to your voice messages. Make a conference call Conference calling is a network service that allows up to six persons to take part in a conference call. 1 Make a call to the first participant. 2 To call a new participant, press Options, scroll to New call, and press Select. 3 Enter the phone number of the new participant (or press Find to

[ 33 DRAFT ]

retrieve a number from your Phone book) and press Call. The first call is put on hold. 4 When the new call picks up, press Options, scroll to Conference, and press Select to connect the calls. 5 To add a new participant to the call, repeat steps 2 through 4. HAVE A PRIVATE CONVERSATION WITH ONE OF THE PARTICIPANTS:

6 Press Options, select Private and select the desired participant. Rejoin the conference call as described in step 4. 7 To end the conference call, press the end key. OPTIONS DURING A CALL Many of the options that you can use during a call, are network services. Press Options during a call to display those listed in the following table. Scroll to an option and press Select to activate the option or enter its submenu Option Mute Unmute End call End all calls Phone book Menu Hold Unhold New call Conference Function Mute your voice; you can hear the other party but they cant hear you Return to normal from mute status End the call End all calls within a conference call Open the Phone book menu Display the main menus Place the current call on hold Remove the current call from hold status Place a new call; the first call is put on hold Call another party and invite them into the call

[ 34 DRAFT ]

Basic operations Option Private Answer Reject Loudspeaker Handset Touch tones Function Have a private conversation with one participant in a conference call Answer another incoming call Reject a call; the calling party receives a busy signal Enable the handsfree feature in your phone Disable handsfree and return to normal use (earpiece) Send touch tones generated by your phones keypad Swap Switch between the active call and the call on hold Press Swap to switch between the active call and the call on hold, Transfer to connect a call on hold, and the end key to disconnect yourself from all calls. SET UP YOUR PHONE Use the Optional headset The HDB-4 may be purchased with your phone or separately as an accessory. Connect the headset 1 Plug the headset jack into the Pop-PortTM connector at the bottom end of your phone.

[ 35 DRAFT ]

2 Position the headset on your ear as it appears in the illustration to the right. With the headset connected, you can make, answer, and end calls as usual. Use the keypad to enter numbers Press the talk key to place a call Press the end key to end a call Adjust display brightness 1 Press Menu 4-4-5 (Settings - Display settings - Display brightness). After a brief pause, a bar chart appears in the display indicating the current brightness level. 2 Press the left or right scroll keys to adjust the brightness to your preference. Change the Xpress-on TM shells Important: Before changing the shells, always switch off the power and disconnect the phone from the charger or any other device. Always store the phone with the shells attached. Note: To avoid fingerprints, try to keep your fingers away from your phones screen once the upper shell has been removed. REMOVE THE LOWER SHELL 1 Push the lower shell release indentions at the top of the phone. 2 Slide the lower shell away from the phone to remove.

[ 36 DRAFT ]

Basic operations REMOVE THE BATTERY 3 After youve removed the lower shell, grasp the removal flap and gently pull; the battery lifts from its compartment REMOVE THE UPPER SHELL 4 Press the metal release bumps on the sides of the phone while gently sliding the upper shell away from the rest of the phone. INSTALL THE KEY MAT AND NEW SHELLS 5 Remove the key mat from the old lower shell and place it into the new lower shell as shown. 6 Slide the upper shell over the top of the phone until it clicks into place. 7 Repace the battery. Position the battery so the gold contacts match up with those on the phone. The battery label should be facing away from the phone. 8 Insert the battery, contact end first into the battery slot. 9 Snap the other end of the battery into place and snap the back of the

[ 37 DRAFT ]

phone closed. 10 Place the phone into the lower shell. 11 Slide the shell forward until it clicks into place.

[ 38 DRAFT ]

5 Text entry Text entry You can use two methods for entering text and numbers. The standard mode is the only way to enter names into such things as the Phone book, calendar notes, and renaming caller groups Predictive text input is a quick and easy method for writing messages STANDARD MODE Enter text (Abc) Press a key once to insert the first letter on the key, twice for the second letter, and so on. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry. Press the 0 key to enter a space thereby accepting a completed word Press the 1 key to enter a period (.) Press the star key to display special characters. See more about special characters on the following pages Enter numbers (123) To switch to 123 mode from Abc mode, press and hold the pound key at any message entry screen until the icon in the upper left corner of the display switches from Abc to 123 (or vice versa). CLEAR THE SCREEN Press Clear to backspace the cursor and delete a character Press and hold Clear to backspace continuously and delete

[ 39 DRAFT ]

Enter punctuation and special characters While at any text entry screen, press the star key to display special characters (press and hold the star key if predictive text is on). The following special characters are available

l

Use four-way scrolling Navigate special characters using the scroll keys much as you would a joystick. Once a character is highlighted, press Insert to insert the character into your message. Up Left Right Down PREDICTIVE TEXT INPUT Predictive text input allows you to quickly write messages using your keypad and the phones built-in dictionary. You can use predictive text to write messages, create a calendar notes, make to-do lists, and more. Activate/deactivate predictive text At a text entry screen, press and hold Options. T9 prediction off or T9 prediction on appears (depending on the prior mode). OR 1 If predictive text is off, press Options, scroll to Predictive text, and press Select. 2 Scroll to the language of your choice and press Select. Predictive text is turned on. The predictive text icon () appears in

[ 40 DRAFT ]

Text entry the upper left corner of the display. Note: The Language setting in predictive text affects the time and date formats of the Clock, Alarm clock, and Calendar. Write with predictive text For example, to write Nokia with the English dictionary selected, press each of the following keys only once: (with predictive text on). The illustration below simulates your display each time a key is pressed. 6 6 5 4 2 PREDICTIVE TEXT TIPS Press the 0 key to enter a space and begin writing the next word If a displayed word is not correct, press the star key to see other matches If ? appears after a word, press Spell to add the word to the dictionary Press the 1 key to insert a period into your message Press and hold Options to turn predictive text on and off Press and hold the star key to display special characters. See Enter punctuation and special characters and Use four-way scrolling on the previous page for the easiest way to enter special characters

[ 41 DRAFT ]

Note: Press the pound key to switch predictive text on and off or to cycle through the various modes available. As you press the pound key, the following icons (not descriptions) appear in the display:

Uppercase text Predictive text is Off Lowercase text Predictive text is Off Sentence case text Predictive text is On Lowercase text Predictive text is On Add new words to the dictionary If you encounter a word that predictive text doesnt recognize, a question mark (?) follows the word and Spell appears in the lower left of the display. The word is added to the dictionary as well as the message youre writing. NOTES ABOUT ADDING WORDS New words that you accept by pressing Select, the 0 key, or deleting Press Spell, enter your new word using the keypad, and press Save. the space between two words are saved to the dictionary. Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary. When the dictionary is full, the most recent addition replaces the first.

[ 42 DRAFT ]

Manage phone security 6 Manage phone security Lock the keypad (Keyguard) Remember to lock your phones keypad to prevent accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates. Important: When Keyguard is on, calls may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press the talk key. The number appears in the display after youve keyed in the last digit. To lock the keypad, press Menu then the star key. Unlock the keypad At the Start screen, press Unlock then the star key. SECURITY LEVELS The security level determines your access to features when a non-owner SIM card is used. A non-owner SIM card is one (other than the original) that is inserted after you power off the phone. There are 3 security levels:

Security levels Off Memory Phone Owner and Non-owner cards are treated the same Non-owner cards can access SIM memory. Any changes to the memory setting requires the security code. The owner card has access to all features, but the security code is required to change a memory setting The security code is required upon power-up Set your security level 1 At the Start screen, press Menu 4-7-5 (Settings - Security settings -

Security level).

[ 43 DRAFT ]

2 After a brief pause, youre prompted to enter the security code. The default code is 12345. Enter the security code and press OK. 3 Scroll to Off, Memory, or Phone and press Select. A message appears in the display confirming your selection FIXED DIALING Once you setup and activate a fixed dialing list, your phone can make calls only to those numbers that youve defined in the fixed dialing list. Fixed dialing is a network feature and must be supported by your wireless provider. Note: When fixed dialing is set on, calls may be possible to certain emergency numbers in some networks (such as 911 or other official emergency numbers). Set up and activate a fixed dialing list 1 At the Start screen, press Menu 4-7-3 (Settings - Security Settings -

Fixed dialing). After a brief pause, the options in the following table appear in the display. Fixed dialing options On Off Activate fixed dialing (see note above) Deactivate fixed dialing Number list View the numbers in your fixed dialing list Note: If you activate fixed dialing and the number list is empty, all outgoing calls, except for emergency numbers such as 911, require entry of the PIN2 code. 2 Scroll to Number list and press Select. Fixed dialing not active and then Fixed dialing list empty appear in the display. 3 Youre prompted to enter the PIN2 code. Enter the PIN2 code and press OK.

[ 44 DRAFT ]

Manage phone security 4 Enter the fixed dialing number, or press Find to retrieve a number from your Phone book and press OK. 5 Enter a name for the number and press OK. A confirmation note appears in the display and youre returned to the fixed dialing number list. 6 Press Back, scroll to On, and press Select to activate fixed dialing. View or edit the fixed dialing list 1 At the Start screen, press Menu 4-7-3 (Settings - Security Settings -

Fixed dialing). 2 Scroll to Number list and press Select. 3 Youre prompted to enter the PIN2 code. Enter the PIN2 code and press OK. 4 Any numbers which youve assigned to fixed dialing appear in the display. 5 Scroll to a number and press Options. 6 The options in the following table appear in the display. Fixed dialing number options View number View the number for an entry Add Edit Delete Add a number to your fixed dialing list Edit the highlighted entry Delete the highlighted entry Delete all Delete all entries in your fixed dialing list Use the scroll keys to highlight an option Press Select to activate or enter an options submenu

[ 45 DRAFT ]

Notes about fixed dialing If a SIM card with fixed dialing that is activated is inserted into a phone that doesnt support fixed dialing, the SIM card is rejected If you try to add a name (without a number) to the fixed dialing list, youll receive an error message If you try to browse the fixed dialing list, but havent stored any numbers, Fixed dialing list empty appears in the display You cannot access SIM memory manually (view or copy numbers on the SIM card) while fixed dialing is active ACCESS CODES Use access codes to change your security code, PIN code, and PIN2 code. Note: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number. The security code The security code controls access to features such as the security level and is supplied with the phone. The preset code is 12345. Note: If you enter the wrong security code five times in succession, you wont be able to enter a code for five minutes, even if you power off the phone between incorrect entries. CHANGE YOUR SECURITY CODE Once you change the security code from its preset of 12345, keep the new code secret, and in a safe place separate from your phone. 1 Press Menu 4-7-6-1 (Settings - Security settings - Access codes -

Change security code). After a brief pause, youre prompted to enter the current security code

(default is 12345). 2 Enter the current security code and press OK. Youre prompted to enter the new security code. 3 Enter the new security code (up to 10 characters) and press OK.

[ 46 DRAFT ]

Manage phone security Youre asked to re-enter the new security code for verification. 4 Enter the new security code again and press OK. A message appears in the display confirming your security code has been changed. The PIN code The PIN code protects the SIM card from unauthorized access. The PIN code can be 4- 8 digits in length. After three successive incorrect entries the PIN code is blocked and youll be asked to enter the personal unblocking key (PUK) code. Note: The PIN code must be obtained from your wireless provider. The PIN code is typically provided with your SIM card. PIN CODE REQUEST Enable your phone to request the PIN code upon power-up. This provides extra security in case your phone is lost or stolen. 1 Press Menu 4-7-1 (Settings - Security settings - PIN code request). 2 After a brief pause, youre prompted to enter the current PIN code. Enter the PIN code and press OK. 3 Scroll to On and press OK. A message appears in the display confirming your selection. CHANGE YOUR PIN CODE Before you can change your PIN code, youll need to enable PIN code request. See PIN code request immediately preceding this section. 1 Press Menu 4-7-6-2 (Settings - Security settings - Access codes -

Change PIN code). 2 After a brief pause, youre prompted to enter the current PIN code. Enter the PIN code and press OK. 3 Youre prompted to enter the new PIN code. Enter the new PIN code and press OK. 4 Youre prompted to re-enter the new PIN code for verification. Enter the new PIN code again and press OK.

[ 47 DRAFT ]

A message appears in the display confirming your PIN code has been changed. The PIN2 Code The PIN2 code is required for features such as Fixed dialing. If you enter an incorrect PIN2 code three times in succession, the PIN2 code is blocked and youll have to enter the PUK2 code. Note: The original PIN2 code must be obtained from your wireless provider. CHANGE YOUR PIN2 CODE 1 Press Menu 4-7-6-3 (Settings - Security settings - Access codes -

Change PIN2 code). Youre prompted to enter the current PIN2 code. 2 Enter the current PIN2 code and press OK. Youre prompted to enter the new PIN2 code. 3 Enter the new PIN2 code and press OK. Youre asked to verify the new PIN2 code by entering it again. 4 Enter the new PIN2 code again and press OK. A message appears in the display confirming youve changed the PIN2 code. Personal unblocking key (PUK) codes PUK and PUK2 codes are used to restore blocked PIN and PIN2 codes. Both PUK and PUK2 codes are eight characters in length and cannot be changed. PUK and PUK2 codes must be obtained from your wireless provider. Important: If you enter an incorrect PUK or PUK2 code 10 times in succession, the message SIM rejected appears in the display and the SIM card can no longer be used. You must contact your wireless provider for a new SIM card. Closed user groups A closed user group is a network service that specifies the group of people whom you can call and who can call you. For more information contact your network operator or service provider.

[ 48 DRAFT ]

The Phone book 7 The Phone book Your Phone book can save up to 300 names, with multiple numbers and text notes for each name. The amount of numbers and text entries that you can save may vary, depending on their length and the total number of entries in the Phone book. Note: This feature uses shared memory. Please see Shared memory on page15 for more information. VIEW THE PHONE BOOK MENU 1 At the Start screen, press the right selection key under Names. The menu items in the left column of the following table appear in the display. 2 Scroll to an item. Press Select to activate the feature or enter its submenu. Menu item Function Find Find a name or select from a list Add entry Add a name to your Phone book Edit name Edit an existing name Delete Copy Delete a name and its associated numbers Copy entries from Phone memory to SIM and vice versa Add number Add a number to an existing name Settings Set memory in use (Phone or SIM), change your Phone book view, and check the memory status of your Phone and SIM card

[ 49 DRAFT ]

Menu item Function 1-touch dialing Service numbers Display the list of 1-touch dialing numbers saved to memory Display a list of numbers related to your wireless provider Own numbers View the numbers (line 1, line 2, data) in use by your SIM card Caller groups View and edit the properties (such as the ring tone) for any of the caller groups SAVE NAMES AND NUMBERS You can save names and numbers to phone memory or to SIM memory. Quickly save a name and number 1 At the Start screen, enter the phone number you wish to save. 2 Press Options, ensure Save is highlighted, and press Select. 3 Enter a name for the number and press OK. A confirmation message appears in the display indicating your entry has been saved. Quickly save (only) a number You can save a phone number as a stand-alone entry in your phonebook. 1 At the Start screen, enter the number you wish to save. 2 Press and hold Options. A message appears in the display confirming your number is saved. Save an entry using the Phone book menu 1 At the Start screen, press Names, scroll to Add entry and press Select. 2 Enter a name using the keypad and press OK. 3 Enter a number and press OK.

[ 50 DRAFT ]

The Phone book 4 Press Done to return to the Start screen. Save addresses and notes To save an email address, youll need to add it to an existing entry (name). 1 Find the entry (name) in your Phone book to which youd like to add an address or note. 2 With the entry highlighted, press Details. 3 Press Options, scroll to Add detail and press Select. 4 Scroll to the address or note of your choice and press Select. 5 Enter the text for the note or address and press OK. Select your Phone book view and memory 1 Press Names, scroll to Settings, and press Select. 2 Scroll to any of the options in the following table. Press Select to enter the options submenu. Option Function Memory in use Select the memory you wish to use. Options are Phone, SIM card, or Phone and SIM combined. With Phone and SIM selected, names and numbers are saved to phone memory but entries saved to both memories appear in the display Select the Name list, Name and number, or Name only view Phone book view Memory status View the amount of phone or SIM memory used as well as the amount of phone or SIM memory available

[ 51 DRAFT ]

Save multiple numbers and text items per name You can save different types of phone numbers and short text items per name to the Phone book. The first number you save for any entry is automatically set as the default, or primary number. 1 At the Start screen, press the up or down scroll key and scroll to the entry to which you wish to add a number or text item. 2 Press Details, and then press Options. 3 Scroll to Add number or Add detail and press Select. 4 Scroll to one of the following types and press Select:

General Mobile Home Work Fax E-mail address Web address Street address Note To change the type, select Change type in the options list. 5 Enter the number or text for the type youve selected and press OK. CHANGE THE DEFAULT (PRIMARY) NUMBER 1 At the Start screen, press the up or down scroll key to scroll to the entry you wish to change and press Details. 2 Scroll to the number you wish to set as default and press Options. 3 Scroll to As primary no. and press Select. Search for a name in the Phone book 1 At the Start screen, press the up or down scroll key to display the contents of your Phone book. 2 Press the key which corresponds to the first letter of the name for which you are performing a search. 3 Press the up or down scroll key to scroll up and down through names in the list. Press the left or right scroll key to move the cursor left or right in the

[ 52 DRAFT ]

The Phone book search window at the bottom of the display, if necessary. 4 Press Details to view the details of the selected name. Edit a name, number or text item 1 Search for the entry as described in the previous section and press Details. 2 Scroll to the name, number or text item you wish to edit and press Options. 3 Scroll to Edit name, Edit number, or Edit detail and press Select. 4 Edit the name, number, or detail to your preference and press OK. Delete names and numbers 1 At the Start screen, press Names, scroll to Delete, and press Select. 2 To delete individual names and numbers, scroll to One by one and press Select. 3 Scroll to the entry you wish to delete, press Delete, and press OK to confirm the deletion. 4 To delete the entire contents of your Phone book, scroll to Delete all, then scroll to the phone book you wish to delete ( Phone or SIM card). 5 Press Delete, then press OK to confirm. Youre asked to enter the security code. 6 Enter the security code and press OK.

[ 53 DRAFT ]

COPY PHONE BOOK ENTRIES 1 At the Start screen, press Names, scroll to Copy, and press Select. 2 Scroll to From phone to SIM card or From SIM card to phone and press Select. The following options appear in the display:

One by one All

*Primary nos. Copies only primary numbers. This appears only if you Select and copy entries one by one Copies all entries from the SIM card or Phone select From phone to SIM. 3 Scroll to the copy method of your choice and press Select. a) b) If you selected One by one, go to step 4. If you selected All or Primary nos., go to step 6. 4 Scroll to the entry you wish to copy and press Copy. 5 Scroll to Keep original or Move original and press Select. The entry is copied and youre returned to the list of Phone book entries. 6 If you selected All or Primary nos. in step 3, scroll to Keep original or Move original and press Select. 7 Press OK to confirm your choice. All entries are copied to the selected destination. Press Back to return to the list of Phone book entries, or press the end key to exit and return to the Start screen. Caution: Select Keep original if youre unsure of which copy method to use. This ensures original entries are merely copied to the new location. Move original deletes files after copying. Send and receive business cards You can send and receive an entry in your Phone book via IR or text message, if supported by your wireless provider. RECEIVE A BUSINESS CARD VIA IR 1 Press Menu 12-1 (Connectivity - Infrared) to ensure IR is activated. When you receive the business card, your phone beeps and a message

[ 54 DRAFT ]

The Phone book appears in the display. 2 Select Save to save the business card in the phones memory, or press Exit (or OK) to discard the business card. SEND A BUSINESS CARD You can send a business card via IR or as an text message to a compatible phone or other handheld device. 1 Highlight an entry from the Phone book that you wish to send and press Details. 2 Press Options, scroll to Send bus. card and press Select. To send the business card via IR, make sure the receiving device is set up to receive data via its IR port and select Via infrared. To send the business card as a message, select Via text message. 3 If you selected Via infrared (and the entry has multiple sub-entries) scroll to Primary no. or All details and press Select. Your business card is sent. 4 If you selected Via text message (and the entry has multiple sub-

entries), scroll to Primary no. or All details and press Select. 5 Enter the number for your recipient or press Find to retrieve a number from your Phone book. 6 Press OK and the business card is sent. 1-TOUCH DIALING You can associate any entry in your Phone book with keys 2 through 9 and then dial those entries by pressing and holding the assigned key. Assign a key to 1-touch dialing 1 At the Start screen, press Names, scroll to 1-touch dialing and press Select. 2 Scroll to any empty slot and press Assign.

[ 55 DRAFT ]

3 Enter the number (including the area code) and press OK, or press Find to retrieve a number from your Phone book. 4 Enter a name for the number and press OK. If 1-touch dialing is off, the phone displays a prompt asking if youd like to turn 1-touch dialing on. Press Yes to activate 1-touch dialing. 5 The entry appears in the slot youve assigned. Make a call with 1-touch dialing Press and hold the key to which an entry has been assigned. Your phone dials the entry assigned to the key. CHANGE 1-TOUCH DIALING NUMBERS 1 At the Start screen, press Names, scroll to 1-touch dialing and press Select. 2 Scroll to the 1-touch dialing entry you wish to change and press Options. 3 Scroll to Change and press Select. 4 Enter the new number, or press Find to retrieve a number from your Phone book, and press OK. 5 Enter a name for the entry and press OK. DELETE 1-TOUCH DIALING NUMBERS 1 At the Start screen, press Names, scroll to 1-touch dialing and press Select. 2 Scroll to the 1-touch dialing location you wish to delete and press Options. 3 Scroll to delete and press Select. Youre asked to confirm the deletion. 4 Press OK to delete the key assignment. VIEW INFO, SERVICE, AND OWN NUMBERS Your wireless provider may have saved your phones operating number, as well as various information and service numbers to your SIM card.

[ 56 DRAFT ]

The Phone book Note: This feature may not be supported by your SIM card. If so, contact your wireless provider for more information. 1 Press Names at the Start screen, scroll to one of the number types in the following table, and press Select. Used this number to... Contact your wireless provider to obtain information Number type Info numbers Service numbers Contact your wireless provider to obtain service Own numbers Display the operating number, or numbers which have been assigned to your phone by your wireless provider 2 To view details of any of the number types in the previous table, press Details when the number type appears in the display. Caller groups You can add Phone book entries to any of 5 caller groups, and then assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic. A caller group can be as small as one person or as large as your entire Phone book. Caller groups can be renamed to suit your preference. CALLER GROUP OPTIONS 1 At the Start screen, press Names, scroll to Caller groups, and press Select. The following Caller groups are available. Family VIP Friends Business Other 2 Use the up and down scroll keys to highlight a group. Press Select to display the following caller group options:

Rename the group to your preference Rename group Group ringing tone Set the ringing tone for the group Group logo Group members Turn the graphic for the caller group on or off Add or remove members from the caller group

[ 57 DRAFT ]

Setup a caller group 1 At the Start screen, press the up or down scroll key to display a list of entries in your Phone book. Tip: Perform a quick find when Phone book entries are displayed by entering the first letter of a name. appears at the bottom of the display to indicate youre performing a search. 2 Scroll to a name youd like to add to a caller group and press Details. 3 Press Options, scroll to Caller groups, and press Select. 4 Scroll to the caller group to which youd like to add the name and press Select. A confirmation message appears in the display.

[ 58 DRAFT ]

Menu functions 8 Menu functions Messages (Menu 1) If youve subscribed to a message service, you can send and receive messages to compatible phones that are also subscribed to a message service. You can also send and receive picture messages, multimedia messages, and e-mail if supported by your network. Composed messages can be up to 450 characters in length. Linked messages Your phone can send and receive long messages (up to 450 characters) in sequences. While receiving linked messages, you can start reading the first part before the phone has received the entire message. While viewing the message, you may see *some text missing* on the display. This is normal, and the message content will be updated as soon as the missing sequence arrives. If the memory is full, you may have to delete a message from your inbox or outbox before your phone can update the missing text. Before you can send and receive messages Youll need the following to send and receive messages:

A messaging service through your wireless provider A message center number, which must be saved to your phone (if your wireless provider hasnt done so already)

[ 59 DRAFT ]

Message icons Icons that precede the title of a message indicate the following:

The message has not been read The message has been read A message (which youve composed) has not been sent i The message is a delivery report The message is a MMS (multimedia message) Choose your message type You can choose the type of message sent by your phone. Types include Text and Fax. Note: The default message type is Text. Note: This feature must be supported by your wireless provider. 1 At the Start screen, press Menu 01-6 (Messages - Message settings). 2 After a brief pause, Text messages appears highlighted. Press Select. 3 Sending profile is highlighted. Press Select. 4 Default profile is highlighted. Press Select. 5 Scroll to Messages sent as and press Select. 6 Scroll to the message type of your choice and press Select. A message appears in the display confirming your selection. Save your message center number Messages sent by your phone are routed through your wireless providers message center. Normally, this number is saved to your phone by your wireless provider. To save the number manually, do the following:

1 At the Start screen, press Menu 01-6 (Messages - Message settings). 2 Text messages is highlighted. Press Select.

[ 60 DRAFT ]

Menu functions 3 Sending profile is highlighted. Press Select. 4 Default profile is highlighted. Press Select. 5 If the box in the display is empty, enter the number given by your wireless provider and press OK. 6 If the box is in the display is full, edit the number only if you are sure the number is incorrect, or youd like to change the number, and press OK. A message appears in the display confirming your number is saved. TIPS FOR COMPOSING A MESSAGE Predictive text input Predictive text allows you to write messages using a built-in dictionary. Its much faster than using the traditional multi-tap method. For each letter of the word that youre spelling, you only need to press the corresponding key on your keypad once. You can use predictive text to write a message, create a calendar note, make a to-do list, and more. Activate/deactivate predictive text At any text entry screen, press and hold Options. Predictive text is turned on (or off), depending on its previous mode. OR 1 At a text entry screen, press Options, scroll to Predictive text, and press Select. 2 Scroll to the language of your choice and press Select. Predictive text is turned on. The predictive text icon () appears in the upper left corner of the display. Note: The Language setting affects the time and date formats of the Clock, Alarm clock, and Calendar.

[ 61 DRAFT ]

Use predictive text For example, to write Nokia, with the English dictionary selected, press each of the following keys once: (with predictive text on):

6 5 4 2 6 The illustration above simulates your display each time a key is pressed. Press the 0 key to enter a space and begin writing the next word. If a displayed word is not correct, press the star key to see other matches. To return to the previous word in the list of matches, press Previous. If ? appears after a word, press Spell to add the word to the dictionary. Press the 1 key to insert a period into your message. Press and hold the star key to display special characters. Press the star key again to cycle through all available characters. See Use special characters in the following section for more information on special characters. Note: Press the pound key to switch predictive text on or off and to use predictive text in various modes. As you press the pound key, the following icons (not the descriptions) appear in the upper left of the display:

Uppercase text Predictive text is Off Lowercase text Predictive text is Off Sentence case text Predictive text is On Lowercase text Predictive text is On

[ 62 DRAFT ]

Menu functions Add new words to the dictionary If you encounter a word that predictive text doesnt recognize, a question mark (?) follows the word and Spell appears in the lower left of the display. The word is added to the dictionary as well as the message youre writing. NOTES ABOUT ADDING WORDS New words that you accept by pressing Select, the 0 key, or deleting Press Spell, enter your new word using the keypad, and press Save. the space between two words are saved to the dictionary. Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary. When the dictionary is full, the most recent addition replaces the first. Use special characters While entering text, press and hold the star key to display the following special characters. Press the star key again to cycle through all available characters:

[ 63 DRAFT ]

Use four-way scrolling In features, such as the calendar monthly view, text messages, and special characters, you can move the cursor up and down as well as left and right. Left, press the left scroll key Up, press the up scroll key Down, press the down scroll key Right, press the right scroll key WRITE AND SEND A TEXT MESSAGE Note: This feature uses shared memory. Please see Shared memory on page15 for more information. 1 At the Start screen, press Menu 01-1-1 (Messages - Text messages

> Create message). Tip: To go quickly to the Create message display, press the left scroll key at the Start screen. 2 After a brief pause, the message entry screen appears in the display. 3 Compose a message using the keypad and press Options. 4 Scroll to Send and press Select. 5 Enter the recipients phone number, or press Find to retrieve a number from your Phone book, and press OK. Your message is sent. Read messages When you receive a message, your phone beeps and Message received appears in the display as well as the unopened letter icon (

1 Press Show to read the message, or Exit to move it to your inbox.

). Note: When you have unopened messages in your inbox, is shown in the upper left corner of the Start screen as a reminder. 2 Use the up and down scroll keys to view the whole message if necessary.

[ 64 DRAFT ]

Menu functions Tip: Keep scrolling to view other information, such as the sender number and time the message was sent. 3 Press Back to move the message to the Inbox, or press Options for other choices, such as Reply or Forward. Read linked messages Your phone can receive one long message (up to 459 characters) in sequences. You can start reading the first part before the phone has received the entire message. While viewing the message, you may see *some text missing* on the display. This is normal, and the message content will be updated as soon as the missing sequence arrives. If the memory is full, you may have to delete a message from your inbox or outbox before your phone can update the missing text. Reply to a message 1 While viewing a message, press Options, scroll to Reply, and press Select. 2 Compose your reply using the keypad, then press Options, scroll to Send, and press Select. 3 The number of the original sender appears in the display. Press OK and your reply is sent. Forward a message 1 While viewing a message, press Options. 2 Scroll to Forward and press Select. 3 Enter the recipients phone number, or press Find to retrieve a number from your Phone book. 4 Press OK. The message is forwarded.

[ 65 DRAFT ]

PICTURE MESSAGES Note: This feature uses shared memory. Please see Shared memory on page15 for more information. Your phone comes with 10 pre-loaded pictures. You can, however, over-

write any of the 10 pictures that come with your phone. Pictures can be attached to a message and sent via text message to compatible phones. Picture messages behave the same as text messages, but pictures take up more space than text. Pictures are stored in the Templates folder under Messages - Templates. Note: You cannot send a picture message via e-mail. Download pictures Your phone can download pictures, or receive them from compatible phones via text messaging to use in messages. You can also create pictures and send them to your phone or other compatible phones using Nokia PC Suite. Note: This function can be used only if it is supported by your wireless provider. Only phones that offer picture message features can receive and display picture messages. Contact your wireless provider for details. When you receive a picture message When you receive a picture message, your phone beeps and Message received appears in the display as well the message icon (

1 Press Show to view the picture message, or press Exit to move it to

). your inbox. 2 If you have more than one picture message, scroll to the message of your choice and press Select to view the message. Note: When you have unopened picture messages in your inbox, as a reminder. is shown in the upper left corner of the Start screen 3 Use the scroll keys to view the whole picture if necessary.

[ 66 DRAFT ]

Menu functions Tip: Keep scrolling to view other information, such as the sender number and time the message was sent. 4 Once youre finished, press Back to move the picture message to the Inbox, or press Options for other choices, such as Reply or Forward. TO SAVE THE PICTURE If youd like to save the picture to your Templates folder for later use:

1 Press Options, scroll to Save picture, and press Select. You can then enter a title for the picture and press OK. Note: If your templates folder is full of pictures, just scroll to the picture youd like to replace and press Select. Compose and send a picture message One picture message is equivalent in size to 3 text messages. When you insert a picture into a message, youll have enough remaining space for about 121 characters in the message. If you try and insert a picture into a message that is almost full of text, a beep sounds and youre prompted to delete some text before proceeding. 1 At the Start screen, press Menu 01-1-1 (Messages - Text messages

- Create message). After a brief pause, the message edit screen appears in the display. 2 Write a message using the keypad (or enter nothing if you choose to just send a picture), and press Options. Tip: Insert pictures before adding text. You can then check remaining space for text in the upper right corner of the display. 3 Scroll to Insert picture and press Select. A list of pictures appears in the display. 4 Scroll to a picture and press View. 5 Press Insert to insert the picture into your message, otherwise:

a) Press Back, scroll to another picture, and press View again. b) Press Insert to insert the picture into your message.

[ 67 DRAFT ]

6 To send the picture message, press Options, scroll to Send, and press Select. 7 Enter the phone number for your recipient (or press Find to retrieve a number from your Phone book) and press OK. The message is sent. PREVIEW, CHANGE, OR DELETE A PICTURE MESSAGE 1 After a picture has been inserted into your message, press Options at the message edit screen. 2 Scroll to one of the following options and press Select. a) Preview - Previews the inserted message before sending. Press Back to return to the list of options. b) Change picture - Takes you back to the picture list. Scroll to highlight a new picture, press View and then press Insert to replace the previous picture in your message. c) Delete picture - Press OK to delete the picture from your message, or press Back to return to the list of options. E-MAIL You can send e-mail up to 160 characters in length to anyone with an e-mail address. First, youll need to setup an e-mail profile and modify a few other settings. It takes just a few minutes, and you only need to do this once. Important:The e-mail address is included in the total character count for an e-mail message, which is 160 characters. Note: You cannot insert pictures into e-mail. Note: Wireless providers may customize the text message settings interface. For more details about text message services, please contact your wireless provider.

[ 68 DRAFT ]

Menu functions Write and send e-mail Note: See Tips for composing a message on page61 for ways to write messages faster. 1 At the Start screen, press Menu 01-1-2 (Messages - Text messages

- Create e-mail). After a brief pause, youre prompted to enter the e-mail address. 2 Enter the e-mail address, or press Find to retrieve an e-mail address from your Phone book, and press OK. 3 Enter a subject for the e-mail and press OK. 4 Compose your e-mail using the keypad and press Options. Tip: Be sure and leave enough space in the total character count

(160) for the e-mail address. 5 Scroll to Send e-mail, if necessary, and press Select. Your e-mail is sent. Reply to a message or e-mail When you have received a text message or e-mail, new messages and ___ Message(s) received appears in the display.

, the number of Note: The blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages. See Delete messages on page82 for more information. Press Show to view the message now, or Exit to view it later. READING THE MESSAGE LATER:

1 Press Menu, and select Messages, Text messages and Inbox. 2 If more than one message is received, select the message you want to read and press Select. An unread text message is indicated by and an unviewed picture message by in front of the message,

[ 69 DRAFT ]

MULTIMEDIA MESSAGES Note: This feature uses shared memory. Please see Shared memory on page15 for more information. A multimedia message (MMS) can contain text, images, and sounds. Your phone has a multimedia message viewer for playing messages and a multimedia inbox for storing saved messages. Once you save the multimedia message, you can use the image as a screen saver or the sound as a ringing tone. Note: This function can be used only if it is supported by your wireless provider. Only compatible devices can receive and display multimedia messages. A multimedia message can contain text, images and sounds. Your phone supports multimedia messages of up to 45 kB. If the maximum size is exceeded, the phone may not be able to receive the message. Depending upon your network, you may receive a message that includes an Internet address where you can go to view the multimedia message. Pictures included in multimedia messages are scaled down to fit the size of your display. Note: The default setting of the multimedia message service is on, and your wireless provider may charge for messages received. Multimedia messaging supports the following formats:

Picture: JPEG, GIF, PNG, OTA-BMP and WBMP. Sound: MIDI Note: If a received message contains unsupported elements, they may be replaced with the text Object format not supported

[ 70 DRAFT ]

Menu functions Define MMS settings Before you can use the multimedia message feature, you need to first define the way you want to receive the messages. ALLOW MULTIMEDIA RECEPTION You can choose to receive all messages or to receive messages only when you are in the service providers home network. 1 At the Start screen, press Menu 01-6-2-2 (Messages - Message settings - Multimedia msgs. - Allow multimedia reception). After a brief pause, a list of options appears in the display. Yes to allow all incoming messages In home system to allow incoming messages only if you are in the service providers home system. 2 After selecting one of the reception options, scroll to Incoming multimedia messages, then press Select. 3 Scroll to Retrieve, then press Select. BLOCK MULTIMEDIA RECEPTION 1 At the Start screen, press Menu 01-6-2-2 (Messages - Message settings - Multimedia msgs. - Allow multimedia reception). After a brief pause, a list of options appears in the display. 2 Scroll to No and press Select. ALLOW OR NOT ALLOW ADVERTISEMENTS 1 At the Start screen, press Menu 01-6-2-5 (Messages - Message settings - Multimedia msgs. - Allow advertisements). After a brief pause, Yes and No appear in the display. 2 Scroll to the setting of your choice and press Select.

[ 71 DRAFT ]

Other MMS settings Other multimedia settings include saving your messages to the Sent items folder and editing your connection settings. 1 At the Start screen, press Menu 01-6-2 (Messages - Message settings - Multimedia msgs.). After a brief pause, a list of options appears in the display. 2 Scroll to an option. Press Select to activate the option or to enter its submenu. Message Setting Save sent messages Allow multimedia reception Incoming multimedia messages Connection settings Function Saves sent multimedia messages to the Sent items folder Chooses Yes, No, or In home network for your multimedia service. In home network cant receive multimedia messages outside the home network. Select Retrieve to receive multimedia messages, or Reject if you dont wish to receive multimedia messages. Define WAP settings for retrieving multimedia messages. Activate the set where you want to save the connection settings and then edit the settings. Allows you to enable or disable reception of automatic multimedia advertisements Allow advertisements Edit multimedia connection settings 1 At the Start screen, press Menu 01-6-2-4 (Messages - Message settings - Multimedia msgs. - Connection settings). 2 Scroll to Edit active multimedia settings and press Select.

[ 72 DRAFT ]

3 The connection settings in the following table appear in the display. Scroll to a setting. Press Select to enter the settings submenu. Menu functions Connection setting Function Settings name Rename the setting to your preference Homepage Enter the homepage where your browser retrieves multimedia messages Session mode Select session modes Temporary or Permanent Data bearer Select the data bearer GPRS access point Define the access point IP address Enter or change the IP address Authentication type Select from Normal or Secure User name Edit or enter your user name Password Edit or enter a password ABOUT CONNECTION SETTINGS You may be able to receive multimedia connection settings as a text message from your wireless provider. For more information, contact your wireless provider. SELECT A FONT SIZE FOR YOUR MESSAGES 1 Press Menu 01-6-3-1 (Messages - Message settings - Other settings

- Font size). After a brief pause a list of choices appear in the display. 2 Scroll to Small font or Large font and press Select. A message appears in the display confirming your selection.

[ 73 DRAFT ]

Write and send a multimedia message For availability and subscription to the multimedia messaging service, contact your wireless provider. 1 At the Start screen, press Menu 01-2-1 (Messages - Multimedia messages - Write message). After a brief pause, the message entry screen appears in the display. 2 Enter the text of your message and press Options. 3 Scroll to Insert image or Insert sound clip and press Select. 4 Choose your image or sound clip from the list and press Select. 5 Scroll to Send to number or Send to e-mail and press Select. Note: If youve attached a picture or sound clip to the message, you cannot send the message via e-mail. 6 Enter the number of the recipient, or the e-mail address and press Select. The message is sent. Read and reply to a multimedia message When a multimedia message is being received, the display. Once the message has been fully downloaded, Multimedia message received appears in the display. 1 To view the message, press Show. To view the message later, press appears (blinking) in and Exit (and then No when asked to discard). 2 While viewing the message, press Options. Some or all of the following options may appear in the display. Scroll to an option and press Select to activate the option or enter its submenu. Option Delete message Reply Function Delete a saved message Reply to the message. Press Options and then Send. The senders phone number or e-mail is used as the default Forward to no. Forward the message to another number

[ 74 DRAFT ]

Menu functions Option Forward to e-mail Edit Details Play Save tone Zoom in Save image Function Forward the message to an e-mail address Edit the message. You can only edit messages that youve written View the message subject, size, and class Listen to a sound clip in the message, if one is included Save a ringing tone, if included, to the gallery Enlarge the picture Save any picture that is attached to your picture gallery Note: If blinks and Multimedia memory full, view waiting msg. appears in the display, memory for multimedia messages is full. You need to delete some of your old messages. See Delete messages on page82 for more information. Chat You can have a conversation with another person using this faster text messaging application. You cant save messages, but you can view them while chatting. Chat messages costs about the same as text messages. START A CHAT SESSION 1 At the Start screen, press Menu 01-3 (Messages - Chat). After a brief pause, youre prompted to enter the recipients phone number. 2 Enter the recipients number or press Find to retrieve a number from the phone book, and press OK. 3 Enter your Chat name (up to 5 characters) and press OK. Another way to start a chat: When you have received a message, press Show to read it. To start a chat, press Options and select Chat. 4 Enter your chat message using the keypad. For faster ways to write a message, see Write with predictive text on page41.

[ 75 DRAFT ]

5 When youre ready to send the message, press Options, scroll to Send, and press Select. 6 When you receive a reply, the message from the other person is shown above your original message. 7 To reply to the message, press OK and repeat the steps 4 and 5. 8 To end the chat session, press OK and select Quit. To view the latest messages of the current chat session, press Options and select Chat history. The message that you have sent is indicated by "<" and your nickname. The messages from your chat partner are indicated by ">" and that senders nickname. Press Back to return to the message you are writing. To edit your nickname, press Options, scroll to Chat name and press Select. VOICE MESSAGES If you subscribe to voicemail, your wireless provider will furnish you with a voice mailbox number. You need to save this number to your phone to use voicemail. When you receive a voice message, your phone lets you know by beeping, displaying a message, or both. If you receive more than one message, your phone shows the number of messages received. Save your voice mailbox number Your wireless provider may have already saved your voice mailbox number to your phone. If so, the number will appear in the display in step 2. Press OK to leave the number unchanged. 1 At the Start screen, press Menu 01-4-2 (Messages - Voice messages -

Voice mailbox number). 2 After a brief pause, the Voice mailbox number screen appears in the display. 3 If the box is empty, enter the voice mailbox area code and number. 4 Press OK. Your phone confirms the number has been saved.

[ 76 DRAFT ]

Menu functions Tip: Save yourself the trouble of entering the mailbox codes each time you dial voicemail. See Automate voicemail later in this section for more information. Call and setup your voicemail 1 Once youve saved the voice mailbox number, press and hold the 1 key. 2 When you connect to voicemail and the pre-recorded greeting begins, follow the services automated instructions to setup your voicemail. Listen to your voice messages Once youve setup voicemail, you can dial the number in one of 4 ways:

Dial the number using the keypad Press and hold the 1 key Press Listen if theres a notification message in the display Press Menu 01-4-1 (Messages - Voice messages - Listen to voice messages). After a brief pause, your phone dials the voicemail number. Once you connect and the pre-recorded greeting begins, follow the automated instructions to listen to your voice messages. AUTOMATE VOICEMAIL You can insert special characters called dialing codes into phone numbers such as voicemail and then save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string. Note: Each voicemail service can vary. The examples and steps that follow are for clarification. Check with your wireless provider if you have specific questions about your voicemail service. Write down some information 1 Write down your voice mailbox number.

[ 77 DRAFT ]

2 Call and check your voicemail as you normally would. 3 Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voicemail service may vary. However, it should look something like this:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press pound key. Important: Be precise, youll need this information in Setup voicemail with dialing codes later in this section. LEARN HOW TO INSERT DIALING CODES Press the star key repeatedly to cycle through dialing codes. Once the desired code appears in the display, pause briefly and the code is inserted into the dialing string. For example, press the star key four times to display the w (wait character). Pause briefly and the wait character is inserted into the dialing string. Available dialing codes are as follows:

Dialing codes Bypasses a set of instructions

Precedes an international telephone number

p Pauses for 2.5 seconds before sending any numbers that follow w Wait. Your phone waits for you to press the talk key before it sends any numbers or codes that follow. Setup voicemail with dialing codes 1 At the Start screen, press Names, scroll to 1-touch dialing, and press Select. 2 Scroll to an empty 1-touch dialing slot and press Assign. 3 Enter your voice mailbox number, including the area code. 4 Refer to the table entitled dialing codes, and enter any codes as necessary using the information that you wrote down earlier.

[ 78 DRAFT ]

Menu functions For example, if you pause for 5 seconds after connecting to voicemail, enter p twice after the voice mailbox number, such as 2145551212pp. 5 Enter any remaining pauses, PIN codes, and other information that allows you to listen to your messages, then press OK. 6 Enter a name (such as Voicemail) and press OK. A message appears in the display confirming your 1-touch dialing location has been saved. Now, to dial and listen to your voicemail, just press and hold the assigned 1-touch dialing key at the Start screen. No other keypresses should be necessary to connect and listen to your messages. MESSAGE OPTIONS Some or all of the options in the following table are available for text messages, picture messages, multimedia messages, and e-mail. 1 While viewing a text, picture, multimedia message, or e-mail press Options. 2 Scroll to highlight an option. Press Select to activate the option or enter its submenu. Option Delete Reply Function Delete the message youre viewing Reply to the message; youve the option to include the Original text in the reply, a template, or empty screen Use detail Extract numbers, e-mail addresses and website addresses from the current message Forward Forward the message to another recipient Edit Move Edit the message Move the message to a folder you specify

[ 79 DRAFT ]

Option Rename Copy to Calendar Function Rename the message before its saved to a folder Copy text from the beginning of the message to your phones calendar as a reminder note for the current day. Message details View the senders name and phone number, the message center used, reception date and time. ORGANIZE MESSAGES WITH FOLDERS Save messages to folders You can save messages to an existing folder or to a folder that youve created. 1 Press Menu 01-1-1 (Messages - Text message - Create message). After a brief pause, the message entry screen appears in the display. 2 Write your message and press Options. 3 Scroll to Save message and press Select. 4 Scroll to the Archive, Templates, or My folders (if youve created a folder of your own) and press Select. The message is saved. View saved messages 1 At the Start screen, press Menu 01-1 (Messages - Text messages). 2 After a brief pause, scroll to the folder containing the message you wish to view and press Select. 3 Once the folder opens, scroll to the message you wish to view and press Select. Inbox folder Messages are automatically stored in the inbox after theyve been read or if you press Back when Message received appears on the Start screen.

[ 80 DRAFT ]

Menu functions Archive folder Store messages that have been read in the Archive folder. Templates folder Pictures and pre-written templates are stored in the Templates folder. Pre-loaded templates can be edited/customized. My folders Keep your messages organized by creating custom folders and saving some of your messages there. ADD A FOLDER OF YOUR OWN 1 At the Start screen, press Menu 01-1-7 (Messages - Text messages

- My folders). After a brief pause, the folder opens. 2 Press Options. Scroll to Add folder and press Select. 3 Enter a name for the new folder and press OK. The folder is added. REMOVE A FOLDER Only folders created in My folders can be deleted. The Inbox, Outbox, Archive, and Template folders are protected. When you delete a folder, all messages in the folder are also deleted. 1 At the Start screen, press Menu 01-1-7 (Messages - Text messages

- My folders). After a brief pause, the folder opens. 2 Any folders that youve created appear in the display. Scroll to the folder you wish to remove and press Options. 3 Scroll to Delete folder and press Select. Youre asked to confirm the deletion. 4 Press OK to delete or Back to exit. Move a message to a folder 1 While viewing the message, press Options. 2 Scroll to Move and press Select. 3 Scroll to the destination folder and press Select.

[ 81 DRAFT ]

DELETE MESSAGES Read some of the unread messages and then delete them If your message memory is full and you have more messages waiting at the network, blinks in on Start screen. You can do the following to create more space:

Delete messages from some of your folders Delete a single message To delete a single message, you need to open it first. 1 Press Menu 01-1 (Messages - Text messages). After a brief pause, a list of options appears in the display. 2 Scroll to the folder containing the message you wish to delete and press Select. A list of messages, if you have any, appears in the display. 3 Scroll to the message you wish to delete and press Select. The message opens. 4 Press Options, scroll to Delete, and press Select. 5 Youre asked to confirm the erasure. Press OK to delete the message or Back to exit. Delete all messages in a folder 1 At the Start screen, press Menu 01-1-8 (Messages - Text messages

- Delete messages). After a brief pause, a list of your folders appears in the display. 2 Scroll to the folder containing the messages you wish to delete and press Select. Youre asked to confirm your erasure. Important: If you select All messages, it deletes any messages which have been read in all of the folders. 3 Press OK to empty the folder.

[ 82 DRAFT ]

Menu functions Change text, e-mail and picture message settings 1 At the Start screen, press Menu 01-6-1-1 (Messages - Message Settings - Text messages - Sending profile). 2 If more than one message profile set is supported by your SIM card, scroll to the set you wish to change and press Select. Message Setting Message center number Default recipient number Use GPRS Reply via same center Messages sent as Message validity E-mail server number Delivery reports Rename sending profile Function Save the phone number of the message center, which is necessary for sending text messages; obtain this number is from your wireless provider For text messages, the default number used to send messages Set GPRS as the preferred method of sending text messages Allow the recipient of your message to send you a reply message via your message center (network service). Select the message type Text, E-mail, Page, or Fax Define how long the network attempts to send your messages before it gives up For e-mail messages, the default number used to send e-mail Request the network to send delivery reports on your messages Change the name of the selected sending profile;

the sending profile sets display only if your SIM card supports more than one set

[ 83 DRAFT ]

OVERWRITE SETTINGS FOR TEXT, E-MAIL, AND PICTURE MESSAGES When the message memory is full, your phone cant send or receive any new messages. However, you can set your phone to automatically replace old messages in the Inbox and Outbox folders when new ones arrive. 1 Press Menu, 01-6-1 (Messages - Message settings - Text messages). After a brief pause, a list of options appear in the display. 2 Scroll to Overwriting in sent items or Overwriting in inbox and press Select. 3 Scroll to Allowed and press Select to replace the old messages with new ones in the Sent items or Inbox folder, respectively. Change multimedia message settings 1 At the Start screen, press Menu 01-6-2 (Messages - Message settings - Multimedia msgs.). After a brief pause, a list of options appears in the display. 2 Scroll to an option. Press Select to activate the option or to enter its submenu. Message setting Save sent messages Allow multimedia reception Incoming multimedia messages Allow advertisement Function Saves sent multimedia messages to the Sent items folder Chooses Yes, No, or In home network for your multimedia service. In home network cant receive multimedia messages outside the home network Select Retrieve to receive multimedia messages, or Reject if you dont wish to receive multimedia messages Allows you to enable or disable reception of automatic multimedia advertisements

[ 84 DRAFT ]

Menu functions RECEIVE MULTIMEDIA CONNECTION SETTINGS AS A TEXT MESSAGE You may be able to receive multimedia connection settings as a text message from your wireless provider. For more information, contact your wireless provider. SELECT A FONT SIZE 1 Press Menu 01-6-3-1 (Messages - Message settings - Other settings

- Font size). After a brief pause, a list of choices appear in the display. 2 Scroll to Small font or Large font and press Select. A message appears in the display confirming your selection. Use the info message service With the info message network service, you can receive short text messages on various topics, such as weather and traffic conditions, from your wireless provider. 1 At the Start screen, press Menu 01-5 (Messages - Info messages). After a brief pause, the list of options in the following table appears in the display. 2 Scroll to an option. Press Select to activate the option or to enter its submenu. Message setting Info service Topics Language Info topics saved on SIM card Function Select On or Off to activate or deactivate the service Options for selecting, adding, editing, and deleting info topics Select the language in which info messages are received. The language you select does not affect the language you select under the Phone settings menu Select one or more info topics to save to your SIM card

[ 85 DRAFT ]

Note: For more information on topics, contact your wireless provider. Use service commands Use the Service commands editor to enter and send service requests (also known as USSD commands) to your wireless provider. Contact your wireless provider for information about specific service commands. 1 At the Start screen, press Menu 01-7 (Messages -

Service commands). 2 Enter a service request, such as an activation command for a specific network service, and press Send.

[ 86 DRAFT ]

Menu functions Call log (Menu 2) Call log stores information about the last 10 missed, 10 received, or 20 dialed calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest. For Call log to work properly:

Your wireless provider must support caller ID, and it must be enabled Your calls cant be blocked Your phone must be on and within the service area CALL LOG OPTIONS Whether you are viewing missed, received, or dialed calls, each of the menu options will be the same. Please refer to the following table regarding menu options for these features. Missed, received, and dialed call options Call time Display the date and time of the call Send message Send a message to the number View number Display the number Edit number Edit the number and associate a name with the number Save Enter a name for the number and save it to your Phone book Add to name Add the number to an existing entry in your Phone book, if the number is not associated with a name Delete Call Clear the number from memory Call the number

[ 87 DRAFT ]

VIEW MISSED CALLS Missed calls are calls that were never answered. You can check for missed calls in two ways:

Note: The Missed calls feature does not function while your phone is off or outside of the service area. 1 If # missed call appears in the display, press List. The phone number appears in the display. 2 Press Options to display the options listed in the table on page87. 3 Scroll to an option, press Select to activate the option or to enter its submenu. OR 1 At the Start screen, press Menu 2-1 (Call log - Missed calls). After a brief pause, a list of missed calls appears in the display

(if any exist). 2 Scroll to a name or number and press Options to display the options listed in the table on page87. 3 Scroll to an option, press Select to activate the option or to enter its submenu. VIEW RECEIVED CALLS Received calls are calls that have been answered. 1 At the Start screen, press Menu 2-2 (Call log - Received calls). After a brief pause, a list of received calls appears in the display

(if any exist). 2 Scroll to a name or number and press Options to display the options listed in the table on page87. 3 Scroll to an option, press Select to activate the option or enter its submenu.

[ 88 DRAFT ]

Menu functions VIEW DIALED NUMBERS You can view dialed numbers in one of two ways:

1 At the Start screen, press the talk key. Your most recently dialed numbers appear in the display. OR 2 At the Start screen, press Menu 2-3 (Call log - Dialed numbers). After a brief pause, your most recently dialed numbers appear in the display. 3 Scroll to a name or number and press Options to display the options listed in the table on page87. 4 Scroll to an option, press Select to activate the option or enter its submenu. Call times You can receive up to five calls from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately. See Set the clock on page31 for instructions on setting your clock. 1 While viewing a missed or received call, press Options, scroll to Call time, and press Select. 2 The time that the last call occurred appears in the display. 3 Press the down scroll key to view other call times from this number. Press Back to return to the options list. CLEAR CALL LISTS To clear any missed, dialed, or received calls from your phones memory:

1 At the Start screen, press Menu 2-4 (Call log - Delete recent call lists). After a brief pause, All, Missed, Received and Dialed appear in the display. 2 Scroll to the call type youd like to clear and press Select.

[ 89 DRAFT ]

VIEW CALL DURATION 1 Duration of last call. At the Start screen, press Menu 2-5-1

(Call log - Call timers - Duration of last call). The duration of your last call appears in the display. 2 Duration of dialed calls. At the Start screen, press Menu 2-5-2

(Call log - Call timers - Duration of dialed calls). The duration of all dialed calls appears in the display. 3 Duration of received calls. At the Start screen, press Menu 2-5-3

(Call log - Call timers - Duration of received calls). The duration of all received calls appears in the display. 4 Duration of all calls. At the Start screen, press Menu 2-5-4

(Call log - Call timers - Duration of all calls). The duration of all calls (missed, dialed, and received) appears in the display.

[ 90 DRAFT ]

Menu functions Profiles (Menu 3) Profiles define how your phone reacts when you receive a call or a message, how your keypad sounds when you press a key, and more. Ringing options, keypad tones, and other settings for each of the 5 available profiles can be left at their default setting, or customized to suit your needs. Select and customize the most suitable profile for your situation, such as when you are in a meeting or outdoors. The following profiles are available:

Normal Silent Meeting Outdoor Pager Note: Profiles are also available for accessories such as a headset and car kit. See Accessory settings on page106 for more information about accessory profiles. SELECT A PROFILE 1 At the Start screen, press Menu 3 (Profiles). After a brief pause, the list of profiles appears in the display. 2 Scroll through the available profiles and press Select once the profile of your choice is highlighted. 3 Scroll to Select and press Select. CUSTOMIZE A PROFILE You can customize any of the profiles a variety of ways. 1 At the Start screen, press Menu 3 (Profiles). After a brief pause, the list of profiles appears in the display. 2 Scroll to the profile you wish to customize and press Select. 3 Scroll to Customize and press Select.

[ 91 DRAFT ]

4 Use the scroll keys to display each of the options in the following table. Once you arrive at the option youd like to customize, press Select. Note: You cannot rename the Normal profile. Custom profile options Ringing options Select the ringing tone style Ringing tone Select the ringing tone for incoming calls Ringing volume Set the volume of your ringing tone Vibrating alert Turn the vibrating alert on or off Light alert Set the phone to flash the flashlight during an incoming call. If you switched the flashlight on before receiving the call, the flashlight will not flash. Message alert tone Select the tone for received messages Keypad tones Set the volume of your keypad tones (or turn them off) Warning tones Turn warning and confirmation tones on or off Alert for Define which caller groups the selected profile will accept or decline. See Caller groups on page57 for more information. Profile name Rename the profile (up to 16 characters) SET A TIMED PROFILE Timed profiles can be used to prevent missed calls. For example, suppose you attend an event that requires your phone be set to Silent before the event starts, but you forget to return it to Normal until long after the

[ 92 DRAFT ]

Menu functions event. During this time, youve missed several calls because the ringing tone was silent. A timed profile can prevent this by automatically returning your phone to the default profile at a time you specify. Note: Timed profiles can be set up to 24 hours in advance. 1 At the Start screen, press Menu 3 (Profiles). After a brief pause, the list of profiles appears in the display. 2 Scroll to the profile you wish to activate and set for timed expiration, then press Select. 3 Scroll to Timed and press Select. 4 Enter the time for the profile to expire and press OK. The profile youve set for expiration is now active and appears in the Start screen along with a small clock icon

[ 93 DRAFT ]

Settings (Menu 4) Set the clock 1 At the Start screen, press Menu 4-1-1

(Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock

(or Hide clock) highlighted. 2 Scroll to Set the time and press Select. 3 Enter the time (in hh:mm format) and press OK. 4 Scroll to am or pm and press Select. The time is set. Show/hide the clock You have the option of displaying (or not displaying) the clock on the Start screen. 1 At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted. 2 Press Select. If your clock was previously hidden, (not shown on the display), it will now appear in the upper right corner of the Start screen. If your clock was previously shown in the display, it will now be hidden from view. Change the time format You can set the time format for am/pm or 24 hour format (military time). 1 At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock).

[ 94 DRAFT ]

Menu functions After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted. 2 Scroll to Time format and press Select. 3 Scroll to 24-hour or am/pm and press Select. A message appears in the display confirming your selection. Set the date 1 At the Start screen, press Menu 4-1-2 (Settings - Time and date settings - Date). After a brief pause, a list of options appears in the display. 2 Scroll to Set the date and press Select. 3 Enter the date and press OK. The date is set. Set or change the date format 1 At the Start screen, press Menu 4-1-2 (Settings - Time and date settings - Date). 2 Scroll to Date format and press Select. 3 Scroll to the format of your choice and press Select. 4 Scroll to the date separator of your choice (period, slash, hyphen, or space) and press Select. A message appears in the display confirming your selection. CALL SETTINGS Call forwarding Call forwarding tells your network to redirect incoming calls to another number. Note: Call forwarding is network-dependent and may not work the same in all networks. Contact your wireless provider for availability.

[ 95 DRAFT ]

ACTIVATE CALL FORWARDING Note: This is a network dependent feature. All options listed in the following table may not appear in the display. Contact your wireless provider for more information. 1 At the Start screen, press Menu 4-2-2 (Settings - Call settings -

Call forwarding). 2 After a brief pause, the forwarding options listed in the following table appear in the display. Forward all voice calls Forward if busy Forward if not answered Forward all calls to the number you specify Forward incoming calls when youre in a call Forward incoming calls to another number if youre unable to answer. You can also set a delay before forwarding takes place Forward incoming calls when your phone is off Forward if out of reach Forward when not able to take calls Forward all fax calls Forward all data calls Forward all data calls to a data mailbox Cancel all call forwarding Forward calls that arent picked up. You can also set a delay before forwarding takes place Forward all fax calls to a fax mailbox Cancel any call forwarding options you may have set 3 Scroll to the option of your choice and press Select. 4 Scroll to Activate and press Select. 5 Scroll to the destination to which your calls will be forwarded

(such as To other no.) and press Select. 6 Enter the number to which your calls, data, or other information will be forwarded and press OK.

[ 96 DRAFT ]

Menu functions Your phone calls the network to activate the feature youve requested. The network sends a confirmation note when the feature has been activated successfully. CANCEL CALL FORWARDING At the Start screen, press Menu 4-2-2-8 (Settings - Call settings -

Call forwarding - Cancel all call forwarding). Note: Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details. Automatic volume control Automatic volume control automatically adjusts your phones earpiece volume according to the noise level in your environment. If the environmental noise level changes, automatic volume control adjusts the earpieces volume level accordingly. Note: Setting automatic volume control during an active call affects only the current call. Automatic volume control is available only in handportable mode. ACTIVATE AUTOMATIC VOLUME CONTROL VIA THE MENU 1 At the Start screen press Menu 4-2-1 (Settings - Call settings -

Automatic volume control). 2 Scroll to Off or On and press Select. The default setting is Off. ACTIVATE AUTOMATIC VOLUME CONTROL DURING A CALL 1 During a call, press Options. 2 Scroll to Auto volume on and press Select. If you increase the volume during an active call by pressing the volume key

, the phones volume level increases regardless of whether or not automatic volume control is activated. When you end the call, the volume returns to the level set before automatic volume control was activated. To deactivate, scroll to Auto volume off and press Select.

[ 97 DRAFT ]

Anykey answer Anykey answer allows you to answer an incoming call by briefly pressing any key except the power key,the left scroll key, the right scroll key, and the end key. 1 At the Start screen, press Menu 4-2-3 (Settings - Call settings -

Anykey answer). After a brief pause, On and Off appear in the display. 2 Scroll to your choice and press Select. Automatic redial Occasionally, your network may experience heavy traffic, resulting in a fast busy signal when you dial. With automatic redial activated, your phone redials the number up to 10 times, and notifies you once the network becomes available. ACTIVATE OR DEACTIVATE AUTOMATIC REDIAL 1 At the Start screen, press Menu 4-2-4 (Settings - Call settings -

Automatic redial). After a brief pause, On and Off appear in the display. 2 Scroll to your choice and press Select. 1-touch dialing You can assign any entry in your Phone book to keys 2 through 9, and then dial those entries by pressing and holding the assigned key. ASSIGN A KEY TO 1-TOUCH DIALING 1 At the Start screen, press Names, scroll to 1-touch dialing and press Select. 2 Scroll to any empty slot and press Assign. 3 Enter the number (including the area code) and press OK, or press Find to retrieve a number from your Phone book. 4 Enter a name for the number and press OK. MAKE A CALL WITH 1-TOUCH DIALING Press and hold the key to which an entry has been assigned.

[ 98 DRAFT ]

OR Press the key to which an entry has been assigned and then press the talk key. Menu functions Call waiting If supported by your wireless provider, call waiting notifies you of an incoming call even while youre in a call. You can then accept, reject, or ignore the incoming call. ACTIVATE CALL WAITING 1 Press Menu, scroll to Settings, and press Select. 2 Scroll to Call settings and press Select. 3 Scroll to Call waiting and press Select. 4 Scroll to Activate and press Select. USE CALL WAITING During a call, press the talk key to answer the waiting call. The first call is put on hold. Press the end key to end the active call. Activate/deactivate summary after call Your phone can display the time spent on a call when you hang up. TURN ON SUMMARY AFTER CALL 1 At the Start screen, press Menu 4-2-6 (Settings - Call settings -

Summary after call). After a brief pause, On and Off appear in the display. 2 Scroll to On and press Select. TURN OFF SUMMARY AFTER CALL 1 At the Start screen, press Menu 4-2-6 (Settings - Call settings -

Summary after call). After a brief pause, On and Off appear in the display. 2 Scroll to Off and press Select.

[ 99 DRAFT ]

Send my caller identity with next call You can prevent your number from being displayed on the receiving partys caller ID. This feature is network dependent and works on a call-by-call basis. Contact your wireless provider for more information. 1 At the Start screen, press Menu 4-2-8 (Settings - Call settings -

Send my caller identity). After a brief pause, Default, Yes, and No appear in the display. 2 Scroll to the selection of your choice and press Select. A message appears in the display confirming your selection. Select a line for outgoing calls Note: This is a network dependent feature. Check with your wireless provider for availability and a description of the feature. 1 At the Start screen, press Menu 4-2-9 (Settings - Call settings - Line for outgoing calls). After a brief pause, Line 1 and Line 2 appear in the display. Important: If you select Line 2 and have not subscribed to this network service, you will not be able to place calls. However, calls on both lines can be answered regardless of the selected line. 2 Scroll to Line 1 or Line 2 and press Select. A message appears in the display confirming your selection. Tip: If supported by your SIM card, you can prevent the line selection by using the Lock option. PHONE SETTINGS Set the display language 1 At the Start screen, press Menu 4-3-1 (Settings - Phone settings - Language). After a brief pause, Automatic, English, Portugus, Espaol, and Franais appear in the display.

[ 100 DRAFT ]

Menu functions 2 Scroll to the language of your choice and press Select. Note: The Language setting affects the time and date formats of the Clock, Alarm clock, and Calendar. ACTIVATE OR DEACTIVATE AUTOMATIC KEYGUARD Important: When keyguard is on, it may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press the talk key. The number is displayed only after you have keyed in its last digit. You can set the keypad of your phone to lock automatically after a preset time delay (from 10 seconds to 60 minutes). When the preset delay expires, the keypad locks automatically. 1 At the Start screen, press Menu 4-3-2 (Settings - Phone settings -

Automatic keyguard). After a brief pause, On and Off appear in the display. 2 Scroll to On (or Off to deactivate) and press Select. 3 If you selected On, Set delay appears in the display. 4 Enter the delay (in minutes and seconds) and press OK. Cell info display Note: Cell info display is network-dependent and may not work the same in all networks. Contact your wireless provider for availability. When this function is selected, your phone will indicate when it is used in a system cell based on Micro- Cellular Network technology. MCN technology increases the capacity of wireless networks in urban areas. The setting will remain in effect even if the SIM card is changed or the phone is switched off. 1 Press Menu 4-3-3 (Settings - Phone settings - Cell info display). After a brief pause, On and Off appear in the display. 2 Scroll to On (or Off) and press Select. A message appears in the display confirming your selection.

[ 101 DRAFT ]

Note: If the GPRS connection is set to Always online, info messages may not be received. In that case, set the GPRS connection to When needed, see GPRS on page137 for more information. Welcome note You can write a welcome note which shows up briefly on your display whenever you power up your phone. Note: Predictive text input is unavailable for entering Welcome note text. 1 At the Start screen, press Menu 4-3-4 (Settings - Phone settings -

Welcome note). After a brief pause, the message edit screen appears in the display awaiting text input. 2 Enter a note (up to 44 characters). Press the star key to display and select from available special characters. For more information on special characters, Enter punctuation and special characters on page40. 3 When youre finished, press Options, scroll to Save, and press Select. Scroll to Delete and press Select if you want to delete the previous text and begin writing another note. System selection You may be able to manually search for another network which has a roaming agreement with your home wireless provider. 1 At the Start screen, press Menu 4-3-5 (Settings - Phone settings -

System selection). After a brief pause, Automatic and Manual appear in the display.

[ 102 DRAFT ]

Menu functions 2 Scroll to Automatic or Manual and press Select. Option Automatic Manual Function Your phone defaults to those settings which have been preset by your wireless provider Your phone searches for a network which has a roaming agreement with your wireless provider Note: If No system access appears in the display, youll need to switch to Automatic mode, or insert another SIM card into the phone. Confirm SIM service actions This option allows you to request notification when your service provider makes changes to SIM-related services (such as activating GPRS service). 1 Press Menu 4-3-6 (Settings - Phone settings - Confirm SIM service actions). After a brief pause, Yes and No appear in the display. 2 Scroll to the selection of your choice and press Select. A message appears in the display confirming your selection. Help text Your phone displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 10 seconds. Use the scroll keys to page through the full help text, if necessary. ACTIVATE/DEACTIVATE HELP TEXT The default setting for Help text is On. However, you can turn help text on or off by doing the following from the Start screen. 1 Press Menu 4-3-7 (Settings - Phone settings - Help text activation). After a brief pause, On and Off appear in the display. 2 Scroll to your choice and press Select. A message appears in the display confirming your selection.

[ 103 DRAFT ]

START-UP TONE You can set your phone to play (or not to play) a start-up tone when the phone is switched on. 1 At the Start screen, press Menu 4-3-8 (Settings - Phone settings -

Start-up tone). After a brief pause, On and Off appear in the display. 2 Scroll to your choice and press Select. A message appears in the display confirming your selection. DISPLAY SETTINGS Wallpaper You can set your phone to display a background picture (wallpaper) on the Start screen. Some pictures are pre-saved in the Gallery menu. You can also receive pictures via multimedia message, download them from WAP pages or transfer them with PC Suite from your PC and then save them in the Gallery. Your phone supports JPEG, GIF, BMP, PNG, and WBMP formats. SELECT WALLPAPER 1 Press Menu 4-4-1 (Settings - Display settings - Wallpaper). After a brief pause, On, Off, and Change image appear in the display. 2 Scroll to Change image and press Select to browse the gallery for another image. 3 Use the up and down scroll keys to browse the image gallery. When you arrive at the image of your choice, press Options, scroll to Set as wallpaper, and press Select. 4 If Replace current wallpaper? appears in the display, press OK. A message appears in the display confirming your selection. ACTIVATE/DEACTIVATE WALLPAPER 1 Press Menu 4-4-1 (Settings - Display settings - Wallpaper). After a brief pause, On, Off, and Change image appear in the display. 2 Scroll to On or Off and press Select.

[ 104 DRAFT ]

Menu functions Color schemes You can change the color of some display components in your phone, such as indicators and signal bars. 1 At the Start screen, press Menu 4-4-2 (Settings - Display settings -

Color Schemes). After a brief pause, a list of color schemes appear in the display. 2 Scroll to the color scheme of your choice and press Select. A message appears in the display confirming your selection. Screen saver The screen saver is activated when no function of the phone is used after a preset period of time. Press any key to deactivate the screen saver. The screen saver is also deactivated when the phone is out of the network coverage area. 1 At the Start screen, press Menu 4-4-3 (Settings - Display settings -

Screen saver timeout). After a brief pause, 2 minutes, 5 minutes, and Other appear in the display. 2 Scroll to 2 minutes or 5 minutes and press Select. 3 If you want to set a custom time (up to 60 minutes), scroll to Other and press Select. Enter the custom time and press OK. A message appears in the display confirming your selection. SCREEN SAVER TIMEOUT You can set your phone to display a screen saver after a preset time or after a custom time (up to 60 minutes) of your choosing. Display brightness You can change the brightness of your phones display. 1 Press Menu 4-4-5 (Settings - Display settings - Display brightness). After a brief pause, a bar chart appears in the display indicating the current brightness level. 2 Use the left and right scroll keys or the side volume keys to adjust the contrast level to your preference.

[ 105 DRAFT ]

3 Press OK to accept your settings. TONE SETTINGS You can adjust the ringing volume, keypad tones, and more for the currently active profile. The same options are described in detail under Customize a profile on page91. Accessory settings The Accessory settings menu is shown only if the phone is or has been connected to one of the compatible accessories such as the headset, car kit, or mobile inductive loopset. 1 At the Start screen, press Menu 4-6 (Settings - Accessory settings). The following options may be available:

2 Scroll to Headset, Handsfree or Loopset and press Select. IF YOU SELECTED HEADSET The following options are available. Scroll to the option of your choice and press Select to enter the options submenu and modify its settings. Default profile - Choose the profile you wish to be automatically activated when a headset is connected Automatic answer - Calls are answered automatically after 1 ring when a headset is connected. Scroll to On or Off and press Select IF YOU SELECTED HANDSFREE The following options are available. Scroll to the option of your choice and press Select to enter the options submenu and modify its settings. Default profile - Choose the profile you wish to be automatically activated when your phone is connected to a car kit. Automatic answer - Calls are answered automatically after 1 ring when a car kit is connected. Scroll to On or Off and press Select. Lights - Choose to keep the phone lights always on, or to shut off automatically after several seconds. Scroll to On or Automatic and press Select.

[ 106 DRAFT ]

Menu functions IF YOU SELECTED LOOPSET The following options are available. Scroll to the option of your choice and press Select to enter the options submenu and modify its settings. Use loopset - Enable use of the LPS-4 mobile inductive loopset. Scroll to Yes or No and press Select. Default profile - Choose the profile you wish to be automatically activated when a loopset is connected. Automatic answer - Calls are answered automatically after 1 ring when a loopset is connected. Scroll to On or Off and press Select. Security settings For information on PIN code request, Call restrictions, Fixed dialing, and other security features, see Manage phone security on page43. Restore factory settings You can reset some of the menu settings to their original values. 1 At the Start screen, press Menu 4-8 (Settings - Restore factory settings). After a brief pause, youre prompted to enter the security code. 2 Enter the security code (the default is 12345) and press OK. A message appears in the display confirming your original settings have been restored. Note: Any data that you have entered, such as names and numbers in your Phone book will not be deleted.

[ 107 DRAFT ]

Alarm clock (Menu 5) The alarm clock is based on your phones internal clock. It sounds an alert any time you specify and even works if the phone is off. SET AN ALARM IF AN ALARM HAS NOT BEEN SET 1 At the Start screen, press Menu 5 (Alarm clock). After a brief pause, youre prompted to enter a time for the alarm. 2 Enter the time for the alarm in hh:mm format and press OK. 3 Scroll to am or pm and press Select. Alarm on appears briefly in the display and appears on the Start screen. IF AN ALARM HAS PREVIOUSLY BEEN SET 1 At the Start screen, press Menu 5 (Alarm clock). After a brief pause, On and Off appear in the display. 2 Scroll to On and press Select. Youre prompted to set the alarm time. 3 Enter the time for the alarm in hh:mm format and press OK. 4 Scroll to am or pm and press Select. Alarm on appears briefly in the display and appears on the Start screen. When the alarm sounds Your phone beeps, vibrates, and the display lights up. Stop and Snooze appear in the bottom of the display. WITH THE PHONE ON Press Stop to shut the alarm off. OR Press Snooze. The alarm stops for 10 minutes and Snoozing appears in the display.

[ 108 DRAFT ]

Note: If you dont press a key, the alarms stops (snoozes) for 5 minutes, and then sounds again. Menu functions WITH THE PHONE OFF 1 The alarm sounds. If you press Stop the following appears in the display:

Switch the phone on?

Note: The phone will only power up if you select Yes when Switch the phone on? appears in the display. 2 Press Yes to power up the phone. Press No to keep it switched off. Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. TURN OFF AN ALARM THAT HAS BEEN SET 1 At the Start screen, press Menu 5 (Alarm clock). After a brief pause, On and Off appear in the display. 2 Scroll to Off and press Select. Alarm off appears briefly in the display.

[ 109 DRAFT ]

Radio (Menu 6) Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. To listen to the FM radio on your phone connect the HDS-3 stereo headset or HDB-4 boom headset to the connector on the bottom of the phone. The leads of the headset function as the antenna, so let it hang freely. Note: The quality of the radio broadcast depends on the radio stations coverage in that particular area. TURN THE RADIO ON AND OFF At the Start screen, press Menu 6 (Radio). To quickly turn off the radio, press and hold e. USE THE RADIO Note: When you place or receive a call, the radio automatically mutes. Once the call is ended, the radio automatically switches back on. With the radio on, press Options to choose from the options listed in the following table. Press the up or down scroll key to scroll to an option. Press Select to activate the option or enter its submenu. Option Turn off Save channel Function Turn off the radio Save the current station to one of 20 locations

[ 110 DRAFT ]

Menu functions Option Automatic tuning Manual tuning Press the up or down scroll key to search in Function Briefly press either scroll key to start the channel search up or down. Press OK when a channel is found. increments of 0.1 Mhz Delete a saved channel Set frequency Manually enter the frequency of a known radio station Delete channel Loudspeaker Mono output/

Stereo output Listen to the radio through the speakerphone Listen to the radio in monaural mode. If already in manual mode, Stereo output appears in the display Tip: To quickly set the radio frequency, press the star key with the radio on. Tip: To manually tune the radio, press the pound key with the radio on. Note: When an application using a GPRS connection is sending or receiving data, it may interfere with the radio.

[ 111 DRAFT ]

SAVE A RADIO CHANNEL You can save a preset station to any one of 20 locations in memory, and then tune to that station by simply pressing the up or down scroll key with the radio on. 1 With the radio on, press and hold the up or down scroll key to start the channel search. Searching stops when a channel is found. 2 To save the channel, press Options, scroll to Save channel, and press Select. 3 Enter a name for the channel and press OK. 4 Next, scroll to an (empty) location to save the channel and press Select. Tip: To quickly save an FM station to a memory location from 1 to 9, press and hold the corresponding number key while the radio is playing. Then, enter the name of the channel and press OK.

[ 112 DRAFT ]

Menu functions Gallery (Menu 7) You can save pictures and ringing tones to folders in the gallery, or create folders of your own and save them there. You can download images and tones via MMS, WAP, or Nokia PC Suite. Note: This feature uses shared memory. Please see Shared memory on page15 for more information. Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. OPEN THE GALLERY At the Start screen, press Menu 7 (Gallery). After a brief pause, the submenus in the following table appear in the display. Option View folders Delete folder Rename folder Add folder aGallery downloads Function Explore the folders in the gallery menu. See View folders in the following section for more info Delete a folder youve created Rename a folder youve created Add a folder of your own Use the image and tone downloads in your phone;

see the following for more information a. The phone tries to connect to the Internet using your WAP browser and the currently active set of gallery downloads. If the connection fails, you may need to activate another set or change the current settings. See Set up for brows-

ing on page141 for more information.

[ 113 DRAFT ]

VIEW FOLDERS 1 At the Start screen, press Menu 7-1(Gallery - View folders), and then press Select. A list of folders appear in the display. 2 Scroll to a folder, such as Images or Tones and press Open. 3 Scroll through the list of images or tones, and press Options. Press Select to activate the option or to enter its submenu. Option Open/Play Delete Move Rename Set as wallpaper/Set as ring tone Details Sort Function Open the selected file; in the Tones folder, this option is named Play Delete the selected file Move the file to another folder Rename the selected file Set the graphic as wallpaper. In the Tones folder, this option is Set as ringing tone; the tone is applied to profile in use View details of the file, such as the name, time and date the file was created Sort the files according to date, type, name, or size

[ 114 DRAFT ]

Menu functions Organizer (Menu 8) Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Your phone has many useful features for organizing your everyday life, including a calendar and a to-do list. CALENDAR The calendar keeps track of reminders, calls you need to make, meetings, and birthdays. It can even sound an alarm for any of these events. Note: This feature uses shared memory. Please see Shared memory on page15 for more information. OPEN THE CALENDAR At the Start screen, press Menu 8-1 (Organizer -

Calendar). After a brief pause, the Monthly view appears in the display with the current date highlighted by a black box. Tip: To quickly open the Calendar, press the right scroll key at the Start screen. Monthly view

[ 115 DRAFT ]

USE FOUR-WAY SCROLLING You can move the cursor in some calendar views using the left, up, down, and right scroll keys much the same as a joystick. To move the cursor:

Left, press the left scroll key Up, press the up scroll key Down, press the down scroll key Right, press the right scroll key MONTHLY VIEW Monthly view provides an overview of the selected month and weeks. It also allows you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder. GO TO A DATE 1 Press Menu 8-1 (Organizer - Calendar). After a brief pause, the monthly view appears in the display. 2 Press Options, scroll to Go to date, and press Select. 3 Enter the date (for example 12/15/2002) and press OK. The monthly view appears in the display with the jump date highlighted. Make a note for a specific date You can choose from five types of notes; Meeting, Call, Birthday, Memo, and Reminder. Your phone asks for further information depending on which note you choose. You also have the option to set an alarm for any note that you select. Note: This feature uses shared memory. Please see Shared memory on page15 for more information. 1 Go to the date for which you want to set a reminder. See Go to a date in the previous section if you need more information. 2 From the monthly view (with the go to date highlighted),

[ 116 DRAFT ]

Menu functions press Options. 3 Scroll to Make a note, and press Select. 4 Scroll to one of the following note types and press Select Meeting Call Birthday Memo Reminder 5 Enter your note, press Options, scroll to Save, and then press Select. For a Meeting note, youre prompted to enter a subject, location, and then a start/end time. Youre then given the option to set an alarm. For a Call note, youre prompted to enter a phone number, a name, and the time. Youre then given the option to set an alarm. For a Birthday note, youre prompted to enter the persons name, and year of birth. Youre then given the option to set an alarm. For a Memo note, youre prompted to enter a subject and then an end date. Youre then given the option to set an alarm. For a Reminder note, youre prompted to enter the subject you wish to be reminded about, youre then given the option to set an alarm. View calendar notes - the Day view After youve created some calendar notes, you can view them as follows:

1 At the Start screen, press Menu 8-1 (Organizer - Calendar). After a brief pause, the monthly view appears in the display with the current date highlighted. Any dates that contain calendar notes will be in bold font. 2 Use four-way scrolling to go to the date containing the note. 3 Press Options, scroll to View day, and press Select. Any notes you have for the day will appear in a list format. 4 To view the body of a highlighted note, press Options, scroll to View and press Select.

[ 117 DRAFT ]

Options while viewing a list of notes 1 Press Options while viewing a days notes to display those options listed in the following table. 2 Scroll to an option. Press Select to activate the option or to enter its submenu. Calendar note options View the full note View Make a note Make another note for the selected date

*Delete

*Edit

*Move Delete the note Edit the note Move the note to another date on your calendar Enable the note to recur on a regular basis (daily, weekly, bi-weekly, monthly, and yearly) Jump to another date on your calendar Send the note to another device via Infrared or as a text message or in vCal format Copy the note. You can then paste the note to another date Set the date and time, date and time format, the day each week starts, and whether you want your notes to auto-delete after a specified time Takes you to the to-do list for todays date

*Repeat Go to date

*Send note

*Copy

*Settings Go to to-do list

*Indicates an option that is available only while viewing the body of a note (not the header). SEND A CALENDAR NOTE TO ANOTHER DEVICE Send a note via Infrared or text message Note: If sending via IR (infrared), ensure the other device is set to receive data via IR. For more information on enabling the receiving devices IR, refer to the user guide for the receiving device.

[ 118 DRAFT ]

Menu functions 1 At the Start screen, press Menu 8-1 (Organizer - Calendar). After a brief pause, the monthly view appears in the display. 2 Jump, or scroll to the date containing the note you wish to send. Tip: Any days containing notes will be in bold font. 3 Press Options, scroll to View day, and press Select. 4 Scroll to the note you wish to send and press Options. 5 Scroll to Send note and press Select. 6 Scroll to Via Infrared, As note, or As text message, and press Select. 7 If you selected Via Infrared, align the infrared ports of both devices and press Select. The note is sent. 8 If you selected As note, enter the number for the recipient

(or press Find to retrieve a number from your Phone book), and press OK. The note is sent. If you selected As text message, the note appears in the display. 9 Press Options, scroll to Send, and press Select. 10 Enter the number for the recipient (or press Find to retrieve a number from your Phone book), and press OK. The note is sent. RECEIVE CALENDAR NOTES FROM ANOTHER DEVICE When you receive a Calendar note, your phone displays Calendar note received. You can then save the note in your Calendar and set an alarm for any date and time. VIEW RECEIVED CALENDAR NOTES 1 When your phone displays Calendar note received, press Show. 2 The text of your note appears in the display. Use the scroll keys to view the entire message, if necessary. SAVE RECEIVED CALENDAR NOTES 1 After viewing the Calendar note, press Options. 2 Scroll to Save and press Select.

[ 119 DRAFT ]

DISCARD VIEWED CALENDAR NOTES 1 After viewing the Calendar note, press Options. 2 Scroll to Discard and press Select. MAKE A TO-DO LIST Note: This feature uses shared memory. Please see Shared memory on page15 for more information. You can keep track of your tasks with the to-do list feature. You may be able to save up to 30 notes, depending on their length. Note: To-do notes are not related to specific dates. Add a to-do note 1 At the Start screen, press Menu 8-2 (Organizer - To-do list). 2 After a brief pause, press Options. If this is your first time to use the to-do list, Add is highlighted. You can also go to the Calendar. 3 Press Select, enter your to-do note and press Options. 4 Scroll to Save and press Select. 5 Scroll to High, Medium, or Low priority and press Select. The to-do note is saved.

[ 120 DRAFT ]

Options while viewing notes Press Options while viewing the header or body of a particular note and the following options appear in the display. Menu functions Body view Option Header view Option View Add View the body of a note Edit Add another note Set deadline Mark note as done Delete the note Edit the content of a note Set a deadline for the note Mark a note or task as complete; no more reminders will follow Delete the note Change the priority to high, medium, or low Send the note as a text message Leave the to-do list and go to the calendar Save the to-do note to a date on your calendar Delete Sort by deadline Send Go to calendar Save to calendar N/A Sort the notes according to their deadline Send the note as a text message Leave the to-do list and go to the calendar Save the to-do note to a date on your calendar N/A Delete Edit priority Send Go to calendar Save to calendar

[ 121 DRAFT ]

Games (Menu 9) Note: Your phone must be switched on to use this function. Donot switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. 1 At the Start screen, press Menu 9 (Games). After a brief pause, the list of game submenus in the following table appear in the display. 2 Scroll to a submenu. Press Select to enter the submenu and choose other settings. Note: Some menus listed in the following table are network dependent. Contact your wireless provider for more information. Submenu Select game Game downloads Memory Settings Function Select a game or enter a games option list. See Game options on page123 for more info on game options Connect to game downloads on the Internet using your WAP browser Check the available memory for games and game related applications Turn game sounds, lights, and shakes on or off

[ 122 DRAFT ]

Menu functions LAUNCH A GAME 1 Press Menu 9-1 (Games - Select game). After a brief pause, a list of games appears in the display. 2 Scroll to a game and press the talk key. If the selection is a single game it will launch. Otherwise, a list of games within the selected game set appears in the display. To launch a single game, scroll to the desired game and press the talk key. Tip: If a game uses the whole display area, selection keys such as Options or Back will not appear in the display. Press the left or right scroll key to show the options keys Select or Back (returns to the game). Game options While viewing the games list, press Options to display those listed in the following table. Scroll to an option and press Select to activate the option or enter its submenu. Option Open Delete Web access Check version Details Function Play the game Delete the game Options for restricting network access Display the version of the highlighted game Display details of the game

[ 123 DRAFT ]

Applications (Menu 10) The phone must be switched on to use this function. Do not switch on the phone when the use of a wireless phone is prohibited or when it may cause interference or danger. With the Applications menu you can manage the Java TM applications installed on your phone, or those that may be offered by your wireless provider. Note: This feature uses shared memory. Please see Shared memory on page15 for more information. LAUNCH AN APPLICATION 1 At the Start screen, press Menu 10-1 (Applications - Select application). After a brief pause, one or more applications appear in the display. 2 Scroll to an application or an application set and press Options, or press the talk key. 3 If the selection is a single application it will be launched. Otherwise, a list of applications in the selected application set is displayed. To launch a single application within the set, scroll to the desired application and press Options, then press Select or the talk key.

[ 124 DRAFT ]

APPLICATION OPTIONS Menu functions Option Open Delete Web access Function Opens the selected application or application set Delete the application or application set from your phone. Provides options for restricting network access Ask first (ask for net access) Allowed (allow net access) Not allowed (to not allow net access) Check version Check if a new version of the application is available Web page Details for download Provides further information or data for the application from an Internet page; this feature is network dependent and only appears if an Internet address has been provided with the application Shows additional information about the application DOWNLOAD APPLICATIONS You can download new JavaTM applications in different ways. Use Application downloads 1 At the Start screen, press Menu 10-2 (Applications - App. downloads). After a brief pause, the list of available WAP bookmarks appears in the display. Note: This feature is network dependent. Contact your wireless provider for more information. Scroll to More bookmarks (if necessary) and press Select to access the list of WAP bookmarks in your Services menu. 2 Scroll to the appropriate bookmark that contains the application you wish to download, and press Select to connect to the WAP page. See

[ 125 DRAFT ]

Navigate the wireless Internet on page142 for information on browsing WAP pages. Use the Game downloads menu At the Start screen, press Menu 9-2 (Games - Game downloads). After a brief pause, your phone connects to the WAP pages using the currently active set of WAP settings. Note: If the connection fails, you may enter the Services menu and activate another set of service settings. See Use browser options on page142 for more info on browser settings. Use PC Suite Use the Java TM Application installer from PC Suite to download the applications in your phone. Note: Nokia does not warrant for applications from non-Nokia sites. If you choose to download Java applications from non-

Nokia sites, take precautions for security or content. Note: When you download a game or an application, it may be saved in the Games menu instead of the Applications menu. Memory status for applications You can view the size of memory available for game and application installations. At the Start screen, press Menu 10-3 (Applications - Memory). After a brief pause, the amount of free memory appears in the display.

[ 126 DRAFT ]

Menu functions Extras (Menu 11) Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. USE THE CALCULATOR The calculator in your phone adds, subtracts, multiplies, divides, counts the square and the square root and converts currency values. Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Note: Calculator has a limited accuracy and rounding errors may occur, especially in long divisions. 1 Press Menu 11-1 (Extras - Calculator). After a brief pause, the calculator screen appears in the display. 2 Enter the first number in the calculation Press the pound key for a decimal point if necessary. 3 Press the star (*) key to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the currently displayed character. Note: To perform a square or square root calculation, press Options, scroll to Square or Square root and press Select. 4 Enter the second number in your calculation. 5 Press Options. Equals is highlighted. Press Select. The sum of your calculation appears in the display.

[ 127 DRAFT ]

USE THE CURRENCY CONVERTER You can convert foreign currency to domestic, or vice versa directly from the Start screen. 1 At the Start screen, enter a currency amount to convert. 2 Press Options, scroll to one of the following and press Select:

To home Converts foreign currency to domestic currency To foreign Converts domestic currency to foreign currency If you havent done so already, youre prompted to enter the exchange rate. 3 Enter the exchange rate and press OK. Press the pound key to insert a decimal. The converted amount appears in the display. Edit the exchange rate 1 At the Start screen, press Menu 11-1 (Extras > Calculator). After a brief pause, the calculator screen appears in the display. 2 Press Options (Exchange rate is highlighted), then press Select and scroll to highlight or display one of the following options:

Foreign units in home units Enter the number of home units it takes to make one unit of foreign currency Home units in foreign units Enter the number of foreign units it takes to make one unit of your home currency 3 Press Select to edit your choice. 4 Enter the exchange rate and press OK. The exchange rate is saved.

[ 128 DRAFT ]

USE THE COUNTDOWN TIMER The countdown timer is like an egg-timer or the timer on your microwave oven. You can enter a specified time (up to 99 hours and 59 minutes), and when the time runs out, your phone sounds an alarm. Menu functions Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Note: The countdown timer only works when the phone is on. Once you turn off your phone, the timer is no longer active. Set the countdown timer 1 At the Start screen, press Menu 11-2 (Extras - Countdown timer). 2 After a brief pause, youre prompted to enter the time. Enter 2 digits for hours, 2 digits for minutes, then press OK. 3 Enter a note for the timer, then press OK. The timer begins running. CHANGE THE TIME After youve set the timer, you can change the time. 1 At the Start screen, press Menu 11-2 (Extras - Countdown timer). After a brief pause, Change time and Stop timer appear in the display. 2 Scroll to Change time and press Select. 3 Enter the new time and press OK. 4 Leave the note as it was, or enter a new note and press OK. The timer begins running. WHEN THE ALARM SOUNDS When the time runs out, your phone sounds an alarm, displays the timer note, and flashes its lights. After 30 seconds the timer alert expires automatically. Press any key during the alarm to stop the timer.

[ 129 DRAFT ]

STOP THE TIMER BEFORE THE ALARM SOUNDS 1 At the Start screen, press Menu 11-2 (Extras - Countdown timer). After a brief pause, Change time and Stop timer appear in the display. 2 Scroll to Stop timer and press Select. Timer stopped appears in the display. USE THE STOPWATCH Your phone has a stopwatch that can be used to track time at sporting events or other occasions. The stopwatch displays time in hours, minutes, seconds and fractions of a second. 00:00:00:0 Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Note about stopwatch operation Using the stopwatch consumes the battery and the phone's operating time will be reduced. Be careful not to let it run in the background when performing other operations with your phone. If you press the end key and return to the Start screen, the clock continues to run in the background and the icon appears in the upper left corner of the screen. To return to the Stopwatch screen, take the following steps:

1 Press Menu 11-3 (Extras - Stopwatch). After a brief pause, a list of options appear in the display. To stop the clock, press Stop. 2 Scroll to Continue and press Select. Measure time 1 Press Menu 11-3 (Extras - Stopwatch). After a brief pause, a list of options appear in the display. 2 Scroll to Split timing and press Select.

[ 130 DRAFT ]

Menu functions 3 Press Start to begin split timing. The running time appears on the screen. Measure split time You can use the split time function for such things as a long distance race when you need to pace yourself. 1 Press Menu 11-3 (Extras - Stopwatch). After a brief pause, a list of options appear in the display. 2 Scroll to Split timing, then press Select. 3 Press Start. 4 Take an intermediate time by pressing Split. The timer continues to run. The split time appears below the running time. If you split the time more than once, the new measured time appears at the beginning of the list. You can scroll to see previous measured times. Measure lap time You can use the lap time function when you want to track how long it takes to complete each cycle or lap. 1 Press Menu 11-3 (Extras - Stopwatch). After a brief pause, a list of options appear in the display. 2 Scroll to Lap timing and press Select. 3 Press Start. The running time appears on the screen. 4 Take a lap time by pressing Lap. The clock stops, then starts immediately from zero. The lap time appears below the running time. If you take more than 1 lap time, the new measured time appears at the beginning of the list. You can scroll to see previous measured times. When you press Stop, the total time appears at the top. SAVE THE LAP TIME 1 While the clock is running, press Stop, then press Options. 2 Scroll to Save and press Select.

[ 131 DRAFT ]

3 Enter a name for the measurement and press OK. If you dont enter a name, the total time is used as the default title for the lap time. STOP THE LAP TIMER Press Stop to end the lap timer. Choose other stopwatch options You can choose the following options when using the Stopwatch. Choice Continue Show last time Function Shows up when the Stopwatch is working in the background. Allows you to view the last measured time. View times Allows you to browse the saved times. Delete times Allows you to delete any saved times. You can delete the saved times one by one or all at once. Note about stopwatch operation Using the stopwatch consumes the battery and the phone's operating time will be reduced. Be careful not to let it run in the background when performing other operations with your phone. If you press the end key and return to the Start screen, the clock continues to run in the background and the icon appears in the upper left corner of the screen. To return to the Stopwatch screen, take the following steps:

1 Press Menu 11-3 (Extras - Stopwatch). After a brief pause, a list of options appear in the display. 2 Scroll to Continue and press Select. To stop the clock, press Stop.

[ 132 DRAFT ]

CALORIE COUNTER Menu functions The calorie counter estimates the amount of energy used in various physical activities. The energy used depends on age, weight and gender. You can save up to 10 activities in your phone. Saving personal data 1 Press Menu 11-4 (Extras - Calorie counter). 2 Scroll to Settings and press Select. 3 Type in your weight and age, then select your gender. 4 Press OK after each entry to save the data. You can select the weight, calorie and velocity format by scrolling down the Settings menu and selecting the formats one by one. Selecting an activity 1 Press Menu 11-4-1 (Extras - Calorie counter - Activities). 2 Press Add new. 3 Select an activity from the list. If available, you can also add an intensity level. 4 Add the duration of activity in hh:mm format and press OK. The summary data with the energy cost is displayed. 5 Press OK to save the activity. Editing and deleting activities You can now add a new activity, edit an existing one, count the total calorie amount or delete an activity. To edit activities, press Options in the Activities main view. Tip: After youve made the Total calories calculation you can make a calendar entry of the calorie consumption by selecting Options

- Save to calendar and entering the date. To delete all activities at once, select Extras-Calorie counter-Delete

[ 133 DRAFT ]

all and press OK. THERMOMETER The thermometer measures the approximate temperature in both Fahrenheit and Celsius. You can set the temperature to display on the Start screen. Set the temperature format 1 Press Menu 11-5 (Extras - Thermometer). 2 Scroll to Temp. format and press Select. 3 Scroll to Celsius or Fahrenheit and press Select. Show or hide the thermometer 1 Press Menu 11-5 (Extras - Thermometer). 2 Scroll to Show thermom. (if thermometer hidden) or Hide thermometer (if thermometer shown) and press Select. Note: To receive the best result, place the phone on a flat surface in a windless environment preferably for 5 minutes. If your phone is being charged or the radio is on, the thermometer shows no temperature. SOUND METER The sound meter measures the level of sound in your phones immediate vicinity, giving an approximation of the actual dB (decibel) level. The vertical bar scrolls up and down, showing the changing noise level. The number in the upper box shows the peak value in decibels. The number in the lower box shows the current sound level in decibels. Note: It is not possible to measure the estimated noise level of a call in progress. Also, you can not use the sound meter when the FM radio is on.

[ 134 DRAFT ]

Menu functions From the Start screen press Menu 11-6 (Settings - Sound meter). Press Options for the following choices:

Hold peak displays both values, but the peak value is updated only Reset peak resets the peak value. when the current noise level is greater than the peak value. Dynamic peak displays both values, but the peak value is valid for only 5 seconds. Noise tuning simulates the sensitivity of your phones hearing mechanism for different frequencies. You can choose between low noise (sounds < 85 dB) and loud noise (sounds > 85 dB).

[ 135 DRAFT ]

Connectivity (Menu 12) Note:Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. You can make a serial connection between your phone and a PC using the DKU-5 data cable, which is available for purchase as an accessory . Once you establish this connection, you can access phone information from your PC, or use your phone as a wireless modem. It may also be possible to make this same serial connection between your phone and an Infrared-equipped laptop or IR-

equipped desktop PC using your phones infrared port. INFRARED You can set up the phone to receive data through its infrared (IR) port. To use an IR connection, transmission and reception must be to or from an infrared compatible phone or device. You can send or receive data such as business cards and calendar notes to or from a compatible phone or data device (such as a computer) via the IR port of your phone. Important:Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 Laser product.

[ 136 DRAFT ]

Menu functions 3 ft. maximum distance SEND AND RECEIVE DATA VIA IR Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices. The preferable distance between the two devices in an infrared connection is from 3 inches to 3 feet. Activate IR in your phone by pressing Menu 12-1

(Connectivity - Infrared) at the Start screen. The user of the other device should activate IR as well. If data transfer is not started within two minutes after the activation of the IR port, the connection is cancelled and has to be started again. IR CONNECTION INDICATOR When is shown continuously, the IR connection is activated and your phone is ready to send or receive data via its IR port. When blinks, your phone is trying to connect to the other device or a connection has been lost. GPRS General Packet Radio Service (GPRS) is a technology used to send and receive data via short bursts or packets over the wireless network. With GPRS, you can stay connected to the Internet and allow for faster downloads without completing a dial-up connection. Applications using GPRS include the WAP browser, text messaging and dial-up connections for making digital data calls.

[ 137 DRAFT ]

GPRS dial-up connections When you use your Nokia phone as a wireless modem, you have the option of enabling GPRS connectivity from your PC or laptop computer. Note: Before you can use GPRS for dial-up connections you must first subscribe to the GPRS network service. Contact your service provider for details on pricing and availability. Some service providers may have already set up information for your GPRS dial-up connection. For more information, see the PC/PDA connectivity guide. This document can be downloaded from the Nokia website at http://www.nokia.com. Using data communication applications For information on using a data communication application, refer to the documentation provided with the application. If you use IR connection:

Activate the IR connection in your phone by pressing Menu 12-1

(Connectivity - Infrared). Also, make sure that the connection is active in your PC. If you use the DKU-5 data cable:

1 Connect the cable to the USB port on the back of your computer and to the connector on your phone. 2 Start using the data communications application on the computer. Note:Making or answering phone calls during a computer connection is not recommended as it might disrupt the operation. For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.

[ 138 DRAFT ]

NOKIA PC SUITE Menu functions Once your phone is connected to your PC, you can use PC Suite to:

Make a backup copy of the data in your phone (Content Copier) Edit Phone book names and numbers, profiles, and settings via your PC's keyboard (Phone Editor) Create ringing tones and transfer them to your phone (PC Composer) Create caller group icons or pictures for use with picture messaging

(PC Graphics) Image converter Sound converter Applications installer Synchronize the Phone book and reminders with PIM applications such as Microsoft Outlook, Outlook Express, and Lotus Organizer (PC Sync) Please refer to the Nokia PC Suite Connectivity Guide for installation and setup instructions. DOWNLOAD PC SUITE SOFTWARE PC Suite software and documentation for the Nokia 5100 can be downloaded from the U.S. Mobile Phone products section of www.nokia.com.

[ 139 DRAFT ]

Services (Menu 13) Your phone has a built-in browser you can use to connect to selected services on the Internet. You can view weather reports, check news or flight times, view financial information, and much more. Note: This feature is network dependent. Contact your wireless provider for more information. NOTES ON WIRELESS INTERNET ACCESS This section gives a brief overview of wireless Internet technology. Technology background WAP A technology called Wireless Application Protocol (WAP) is to mobile devices what the World Wide Web (WWW) is to personal computers. The mobile community began developing WAP several years ago to provide access to the Internet for mobile users. Today, most WAP sites are made up of text and hyperlinks. Some pages even contain low-resolution graphics, or require data input. Your service provider and others are free to design WAP sites as they choose, so the sites are as variable as Web pages on the Internet. Internet content on your personal computer is called a web page. Internet content on your mobile phone is called a page, or WAP card. The wireless providers role Because wireless Internet content is designed to be viewed from your phone, your wireless provider now becomes your wireless Internet service provider as well.

[ 140 DRAFT ]

Menu functions Its likely that your wireless provider has created a home page and set up your browser to go to this page when you log on to the Internet. Once at your service providers home page, you may find links to a number of other sites. SET UP FOR BROWSING It shouldnt be necessary to manually configure the browser on your phone. Normally this is done by your wireless provider once youve subscribed to the feature. Contact your wireless provider if you have problems using the browser. SIGN ON TO THE WIRELESS INTERNET Use the Services menu to connect to the Internet. Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Press Menu 13-1 (Services - Home). After a brief pause, youre phone attempts to connect to your wireless providers home page. OR At the Start screen, press and hold the 0 key. Your phone connects to the Internet and to your service providers home page. If you see the message Check service settings, the phone may not be set up for browsing. Contact your wireless provider to make sure that your phone is configured properly.

[ 141 DRAFT ]

USE BROWSER OPTIONS The Services menu gives you the options shown in the following table. Some wireless providers may have customized the options on the Services menu. Contact your wireless provider for more information if any of the options shown in the following table are not available. Choice Home What it does Starts the browser and takes you to your service providers home page. Bookmarks Shows a list of all saved bookmarks. Bookmarks help Service inbox Settings Go to address Clear the cache you find a WAP site quickly. Allows you to receive notifications from your service provider about new e-mail messages, changes in stock prices, and so on Provides options for changing connection settings, appearance settings, and authority certificate. Accepts an address you enter. Empties the browsers temporary memory. Its advisable to empty the cache at the end of each session. NAVIGATE THE WIRELESS INTERNET Since your phones screen is much smaller than a computer screen, Internet content is displayed differently than you may be accustomed to seeing. This section contains guidelines for using phone keys to navigate a WAP site. Examples of how to read a WAP site follow the guidelines. General guidelines for using the phone keys Use the up or down scroll keys to browse the WAP site. To select a highlighted item, press the talk key. To enter letters and numbers, press the keys 0 through 9. To enter special characters, press the star key.

[ 142 DRAFT ]

Examples of wireless Internet sites The following illustrations show most of the elements you may find on a wireless Internet site. These are examples only. Menu functions 1) 2) 3) 4) 5) 7) 6) 1) Header line: shows the current Internet site. 2) Active link: appears as a highlighted word. 3) Inactive link: appears as an underlined word. Scroll through the list of links using the up and down scroll keys. 4) Selection list: Brackets [ ]

appear when you have the option to enter information. 5) Options: Press Options to go to the sites menu and/or browser page. 6) Back: Press Back to return to the previous page. 7) Data entry field: Brackets

[ ] that enclose dots indicate when you need to enter information. In this example, you can enter your zip code to receive the local weather forecast.

[ 143 DRAFT ]

USE BOOKMARKS You can save addresses for your favorite sites as bookmarks. A bookmark helps you find a site again, just as a slip of paper helps you find a page in a book. You can add up to 30 bookmarks to your browser. Set a bookmark while browsing 1 Press Menu 13-2 (Services - Bookmarks). After a brief pause, a list of bookmarks (if any) appear in the display. 2 Press Options, scroll to New bookmark (if necessary), and press Select. 3 Enter an address for the bookmark and press OK. 4 Enter a title for the bookmark and press OK. A message appears in the display confirming your bookmark is saved. Disconnect from the Internet To close your connection, simply press the end key twice. Security issues BE SURE TO CLEAR THE CACHE MEMORY The information or services you access with the WAP browser are temporarily saved in the cache memory of the phone. A cache is a buffer memory, which is used to store data temporarily. If you tried to access or have accessed confidential information requiring passwords (for example, your bank account), empty the cache of your phone after each use. CLEAR THE CACHE 1 Press Menu 13 (Services). After a brief pause, a list of options appear in the display. 2 Scroll to Clear the cache and press Select. CLEAR THE CACHE WHILE BROWSING Press Options, scroll to Clear the cache and press Select.

[ 144 DRAFT ]

Menu functions About authority certificates To use some WAP services, such as banking services, you need an authority certificate. Using the certificate can help you to improve the security of connections between your phone and a WAP server. You can download the certificate from a WAP page if the WAP service supports the use of authority certificates. After the download, you can view the certificate, then save or delete it. If you save the certificate, it is added to the list of certificates in the phone. Your phone alerts you if the identity of the WAP server or WAP gateway cannot be verified or is not authentic. VIEW THE LIST OF AUTHORITY CERTIFICATES 1 Press Menu 13-4 (Services - Settings). After a brief pause, a list of settings appears in the display. 2 Scroll to Authority certificates and press Select. GPRS ICONS The following icons appear on the screen to show you the status of your GPRS connection. Note: In order to use GPRS, you must first subscribe to the network service. Contact your service provider for details on availability and pricing. Shows up in the upper left corner of the screen. Indicates an active GPRS connection, for example, when you are using the WAP browser. Indicates that circuit switched (CS) or voice calls are not possible when using GPRS. Indicates that the GPRS connection has been interrupted by a voice call.

[ 145 DRAFT ]

Set up an automatic connection Some service providers may have customized the options on the Services menu. Contact your service provider for more information if the options shown here are not available. Important: GPRS may not be available in all wireless networks. The establishment and continuation of a GPRS and Internet connection depends on network availability, service provider support, and signal strength. You can choose one of the following options for your GPRS connection. 1 At the Start screen, press Menu 12-2-2 (Connectivity - GPRS - GPRS connection). After a brief pause, the following options appear in the display. 2 Scroll to an option and press Select to activate the option or to enter its submenu. Always online: the phone is automatically registered to a GPRS network when you turn your phone on. When you use the WAP browser, the connection between your phone and the network is created and data transfer is possible. When you exit the WAP browser, the GPRS connection ends but the registration to the GPRS network remains. When needed: the GPRS connection is established when you use the WAP browser and is closed when you exit the WAP browser. Receive a call while online If you are using the WAP browser over GPRS, you can still receive a voice call. Your data call is put on hold and you can choose to answer the call. To answer the incoming call, press the talk key. To reject the incoming call, press the end key. Note: After you end your voice call, the GPRS connection automatically resumes.

[ 146 DRAFT ]

Menu functions Make a call while online When you are browsing a WAP card and want to make a call, you can select Use number. Your phone then searches the information on the WAP card for a string of numbers. You can then choose from the number or numbers displayed to place the call. An alternate way is to press the end key to disconnect from the Internet, then place your call by searching the phone book for a name and number or by keying in the phone number. Make an emergency call while online If you are using GPRS to connect to the Internet, you can end your data connection and then make an emergency call. 1 To close your Internet connection, simply press the end key. 2 Enter the emergency number for your present location (for example, 911 or any other official emergency numberemergency numbers vary by location). 3 Press the talk key.

[ 147 DRAFT ]

9 Accessories Standard 720 mAh Li-Ion Battery (BL-4C) Provides up to 5 hours of talk time. Provides up to 3 hours talk time with the speaker. Provides up to 10 days of standby time. Radio and headset up to 20 hours. Radio and speaker up to 8 hours. Note: Operation times are estimates and may vary depending on network conditions, charging and phone use. Mobile Charger (LCH-12) Quickly charges the phones battery from your vehicle.

[ 148 DRAFT ]

Accessories Rapid Travel Charger (ACP-12) This lightweight AC charger can be used with all battery options. To use the charger, plug it into a standard 120V AC wall outlet, and connect the lead from the charger to the base of your phone. Calls can be made during charging, even with a fully discharged battery. The charger can also be used together with the optional Desktop Stand (DCV-14). Boom Headset (HDB-4) New over-the-ear design concept boom headset is small, lightweight, and provides excellent audio quality. Stereo Headset (HDS-3) Distinctive Nokia design enabling the use of stereo FM radio available on some Nokia phones. Provides excellent audio quality and handsfree functionality with an integral send/end button.

[ 149 DRAFT ]

Loopset (LPS-4) With the Nokia Loopset, people who use a T-coil equipped hearing aid have the freedom to talk on a digital mobile phone. The loopset goes around your neck - so it can be worn comfortably and discreetly. Data Cable (DKU-5) For e-mail, faxes, Internet and data transmissions. Easy and convenient connection with no modem or PC card needed. Xpress-onTM Color Shells Express yourself with Xpress-onTM color shells that match your own unique style. Nokia 5100 color shells available in yellow, black, and red.

[ 150 DRAFT ]

Accessories HDA-10 TTY Adapter For use with a TTY device. HS-1C Camera Headset

[ 151 DRAFT ]

10 Referenceinformation This section provides information about your phones batteries, accessories, chargers, safety guidelines and technical information. Be aware that the information in this section is subject to change as batteries, chargers, and accessories change. BATTERIES AND CHARGERS This phone is intended for use when supplied with power from the ACP-12U and LCH-12 chargers. Other usage could invalidate any approval given to this apparatus and might be dangerous. Warning:When you purchase batteries, chargers, and accessories for your phone, use only batteries, chargers, and accessories that have received approval from the phones manufacturer. The use of any other type of phone-related hardware will invalidate any approval or warranty applying to the phone, and could also be dangerous. For availability of approved batteries, chargers, and accessories, check with your dealer. When the battery is fully charged, the indicator will tell you that the battery is fully charged. When you are not using a charger, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging could shorten its lifespan. If left unused, a fully charged battery will discharge itself over time. Temperature extremes can affect the ability of your battery to charge. Therefore, allow it to cool down or warm up before trying to charge it. When the battery is running out of power and your phone only has a few minutes of talk time remaining, a warning tone sounds and the Battery low message appears briefly. When no more talk time is left, a warning tone is sounded and the phone switches off.

[ 152 DRAFT ]

Referenceinformation Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object, like a coin, a clip, or a pen causes a direct connection of the + and - terminals of the battery, which are metal strips on the end of the battery. An example of short-circuiting could occur if you carry a spare battery in your pocket or purse, where the battery could come into contact with such objects as a coin. Short-circuiting could damage either the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in either summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59 F and 77 F (15 C and 25 C). A phone with a hot or cold battery might not work temporarily, even if the battery is fully charged. The performance of Li-Ion batteries is particularly limited in temperatures below 32 F (0 C). The following list provides guidelines that you can follow:

When the operating time (talk time and standby time) is noticeably shorter than normal, buy a new battery. Use the battery only for its intended purpose. Never use any charger or battery that is damaged and/or worn out. Batteries must be recycled or disposed of properly. Do not dispose of batteries by putting them in fire!

When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

[ 153 DRAFT ]

IMPORTANT SAFETY INFORMATION Traffic safety Do not use a wireless telephone while driving a vehicle. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. Remember road safety always comes first!

Operating environment Remember to follow any special regulations and always switch off your phone wherever forbidden, or when it may cause interference or danger. When connecting the phone or accessory to another device, read its users guide for safety instructions. Dont connect incompatible products. As with other mobile radio transmitting equipment, users are advised to operate this equipment only in the normal operating position (held to your ear with the antenna pointing over your shoulder). Pacemakers Pacemaker manufacturers recommend a distance of 20 cm (6 inches) be maintained between a hand-held wireless phone and a pacemaker to avoid interference with the pacemaker. These recommendations are consistent with independent research and recommendations of Wireless Technology Research. PERSONS WITH A PACEMAKER:

Should always keep the phone more than 20 cm (6 inches) from their pacemaker when the phone is switched on. Should not carry the phone in a breast pocket. Should use the ear opposite the pacemaker to minimize the potential for interference. Should switch off the phone immediately if there is any reason to suspect that interference is taking place.

[ 154 DRAFT ]

Referenceinformation Hearing aids Some digital wireless phones may interfere with hearing aids. In the event of such interference, consult your wireless provider. Other medical devices Operation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if it is adequately shielded from external RF energy, or if you have any questions. Switch off your phone in health care facilities when regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to RF energy. Electronic devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals emanating from your wireless phone. Posted facilities Switch your phone off in any facility where posted notices so require. Potentially explosive atmospheres Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch off the phone when at a refuelling point

(service station). Users are reminded of the need to observe restrictions regarding the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants, or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer/

storage facilities, vehicles using liquefied petroleum gas (such as propane

[ 155 DRAFT ]

or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would be advised to turn off your vehicle engine. Vehicles Only qualified personnel should install or service the phone in a vehicle. Faulty installation or service may be dangerous and invalidate the warranty. RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (for example, electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Ensure all wireless phone equipment in your vehicle is mounted and operating properly. Dont carry or store flammable liquids, gases or explosive materials in the same compartment as the phone or its accessories. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Dont place any objects in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Aircraft Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both.

[ 156 DRAFT ]

Referenceinformation Emergency calls Important: This phone, like any wireless phone, operates using radio signals and cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless phone for essential communications (such as medical emergencies). Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local wireless providers for more information. MAKING AN EMERGENCY CALL:

1 If the phone is not on, switch it on. Important: Some networks may require that a valid SIM card be properly inserted in the phone. 2 Press and hold the end key to return to the Start screen. 3 Enter the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location. 4 Press the talk key. If certain features are in use (Keyguard, fixed dialing, and so on), you may first need to turn those features off before you can make an emergency call. Consult this guide and your local wireless provider for more information. When making an emergency call, remember to provide all information as accurately and clearly as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident -

dont cut off the call until given permission to do so.

[ 157 DRAFT ]

Certification Information THIS MODEL PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.40W/kg, and when worn on the body, as described in this user guide, is .88W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.

[ 158 DRAFT ]

Referenceinformation The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID LJPNPM-6X. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and that positions the handset a minimum of 5/8 inch (1.5 cm) from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 5/8 inch (1.5 cm) from your body when the phone is switched on. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at http://www.nokia.com.

[ 159 DRAFT ]

11 Care and maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and to enjoy this product for many years. When using your phone, battery, charger, or any accessory:

Keep all parts and accessories out of small childrens reach. Keep all parts and accessories dry. Precipitation, humidity, and liquids contain minerals that will corrode electronic circuits. Dont use or store parts or accessories in dusty, dirty areas. Moving parts can be damaged. Dont store parts or accessories in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Dont store parts or accessories in cold areas. When the phone warms up (to its normal temperature), moisture can form inside the phone, which may damage electronic circuit boards. Dont attempt to open. Non-expert handling could cause damage. Dont drop, knock or shake. Rough handling can break internal circuit boards. Dont use harsh chemicals, cleaning solvents, or strong detergents to clean parts or accessories. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution. Dont paint. Paint can clog moving parts and prevent proper operation. Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the phone and may violate regulations governing radio devices. If the phone, battery, charger, or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.

[ 160 DRAFT ]

TROUBLESHOOTING The following table lists some common problems and their solutions. Care and maintenance Problem Possible cause Possible solution The charger and phone arent properly connected The charger is not properly plugged into the wall The battery isnt charged The signal strength is poor My phone isnt charging My phone isnt making/

receiving calls You dont have voicemail service You havent setup your voicemail service with your wireless provider You havent saved your voicemail number to your phone Youve forgotten your password or are entering it incorrectly The voicemail number youve saved to your phone is incorrect Fixed dialing is activated on your SIM card and the receiving phone doesnt support fixed dialing I cant listen to my voice messages When I insert my SIM card into another phone, its rejected Securely connect the charger to the phone Ensure the charger is plugged in correctly Charge the battery If you are indoors, move toward a window Call your wireless provider Call your wireless provider See Save your voice mailbox number on page76 Call your wireless provider Call your wireless provider Deactivate fixed dialing on the SIM

[ 161 DRAFT ]

12 Frequently Asked Questions This section lists answers to the most frequently asked questions. Some of the answers contain menu shortcuts. For a list of shortcuts, see Menu shortcuts on page19. Q. What is my security code?

A. The default security code is 12345. However, Nokia recommends that you change this code immediately. Certain features can be used only after the correct security code has been successfully entered. Q. How do I lock and unlock the keypad?

A. Lock the keypad by pressing Menu, then the star key. To unlock the keypad, press Unlock, then the star key. Q. How do I make the phone ring louder?

A. Press Menu 3 (Profiles), and scroll through the list of profiles until you find the one for which you want to set the ringing volume. Then press Select. Scroll to Customize and press Select. Scroll to Ringing volume and press Select. Scroll to the volume level of your preference and press Select. Q. How do I change the ringing tone?

A. Press Menu 3 (Profiles) and scroll through the list of profiles until you find the one for which you want to set the ringing tone. Then press Select. Scroll to Customize and press Select. Scroll to Ringing tone, and then press Select. Scroll through the options. After you hear the tone you want to use, press Select.

[ 162 DRAFT ]

Frequently Asked Questions Q. How do I store my voice mailbox number?

A. Press Menu 01-4-2 (Messages - Voice messages - Voice mailbox number). Enter your voice mailbox phone number, and press OK. Q. How do I call my voice mailbox number (retrieve voice messages)?

A. When your phone alerts you to new voice messages, press Listen and follow the instructions on the phone. If youd rather listen to your messages later, press Exit. To listen to your voice messages at a later time, perform one of the following actions:

Press and hold the 1 key. Press Menu 01-4-1 (Messages > Voice messages > Listen to voice messages). Follow the recorded voice prompts to listen to your messages. Q. How do I redial the last-dialed number?

A. Press the talk key twice. Q. How do I assign a key to 1-touch dialing?

A. Press Names and scroll to 1-touch dialing. Press Select. Scroll to the first (empty) slot and press Assign. Enter or retrieve the name/number you want to assign to the key and press OK. Repeat these steps as many times as necessary. Q. How do I check the Phone book memory status?

A. Press Names, scroll to Settings, and press Select. Scroll to Memory status and press Select. Scroll to Phone or SIM card and press Select. The memory status for your selection appears in the display.

[ 163 DRAFT ]

Q. How do I find my phones Model number and IMEI number?

A. The model number and IMEI numbers are located on a label under the phones battery. Turn your phone off, remove the lower shell and then remove the battery from the phone. Q. How do I clear my call timers?

Important:Clearing call timers cannot be undone. A. Press Menu 2-5-5 (Call log - Call timers - Clear timers). When the security code prompt appears, enter your security code and press OK.

[ 164 DRAFT ]

Glossary 13 Glossary Business card A business card is the same as an entry in the phone book. It may contain a name, phone number, and text entry. It can also be sent to other devices. Call forwarding A network services feature you use to forward incoming calls to another number. A list used to track numbers for incoming, outgoing, or missed calls. A log that registers information about calls you make and receive. Timers used to track the amount of time you spend on calls. A network services feature that enables your phone to beep while you are in the middle of a call. The beep lets you know that someone else is calling you. The identification number that is assigned to the phone. This number is located under the battery. Call lists Call log Call timers Call waiting International Mobile Equipment Identifier (IMEI) In-call options Features available for use while you are in a call. Keyguard Locks the keypad to prevent accidental key presses. Keypad tones The tone you hear when you press a key. Menu A list of choices you can make to change settings on your phone or use various phone features.

[ 165 DRAFT ]

Predictive text A method of entering information in your phone that uses a dictionary to predict, or guess, what you are writing. Profile A group of settings you can use to customize the way your phone works. Quick save A fast method for saving a number. Ringing tone The sound your phone makes when you receive a call. Ringing tones can be ringing sounds or short tunes. Scroll bar A bar that appears on the right side of the screen when you scroll through the main menus. Start screen Your phones idle screen. Voice mail Warning tones A network services feature that enables people who call and miss you to leave a voice message on your phone. Sounds your phone makes during error conditions, during confirmations, when the battery is low, and when you need to recharge the battery.

[ 166 DRAFT ]

14 Technical information Technical information Feature Weight Wireless networks Size (volume) Frequency Range (Tx) Frequency Range (Rx) Tx Output Power Battery Voltage Number of channels Memory locations Specification 2.92 oz. (82.78 grams) with BL-4C 700 mAh Li-Ion Battery GSM 900, 1800, and 1900 networks 104g/ 89cc / 108.5x49.5x22mm GSM 900: 880 - 915 Mhz GSM 1800: 1710 - 1785 Mhz GSM 1900: 1850 - 1910 Mhz GSM 900: 925 - 960 Mhz GSM 1800: 1805 -1865 Mhz GSM 1900: 1930 - 1990 Mhz 2W (max) 3.6 v DC 299 Up to 300 in phone memory

[ 167 DRAFT ]

15 Nokia One-Year Limited Warranty Nokia Inc. (Nokia) warrants that this cellular phone (Product) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions:

1 The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. This one year period is extended by each whole day that the Product is out of your possession for repair under this warranty. 2 The limited warranty extends only to the original purchaser (Consumer) of the Product and is not assignable or transferable to any subsequent purchaser/end- user. 3 The limited warranty extends only to Consumers who purchase the Product in the United States of America. 4 During the limited warranty period, Nokia will repair, or replace, at Nokias sole option, any defective parts, or any parts that will not properly operate for their intended use with new or refurbished replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. No charge will be made to the Consumer for any such parts. Nokia will also pay for the labor charges incurred by Nokia in repairing or replacing the defective parts. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts. Nokias limit of liability under the limited warranty shall be the actual cash value of the Product at the time the Consumer returns the Product for repair, determined by the price paid by the Consumer for the Product less a reasonable amount for usage. Nokia shall not be liable for any other losses or damages. These remedies are the Consumers exclusive remedies for breach of warranty.

[ 168 DRAFT ]

Nokia One-Year Limited Warranty 5 Upon request from Nokia, the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt. 6 The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty. 7 The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:

a) The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of Nokia, including damage caused by shipping. The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, damage caused by computer or Internet viruses, bugs, worms, Trojan Horses, cancelbots or damage caused by the connection to other products not recommended for interconnection by Nokia. b) d) c) Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period. The Product serial number plate or the accessory data code has been removed, defaced or altered. The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna, or viruses or other software problems introduced into the Product. e)

[ 169 DRAFT ]

8 Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:

a) b) c) d) The Consumer shall return the Product to the place of purchase for repair or replacement processing. If a is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to:

Nokia Inc., Attn.: Repair Department 795 West Nasa Blvd. Melbourne, FL 32901 The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty. The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product. e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the Product. If Nokia cannot perform repairs covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, Nokia at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage. In some states the Consumer may have the right to a loaner if the repair of the Product takes more than ten (10) days. Please contact the Customer Service Center at Nokia at the telephone number listed at the end of this warranty if you need a loaner and the repair of the Product has taken or is estimated to take more than ten (10) days.

[ 170 DRAFT ]

Nokia One-Year Limited Warranty f) If the Product is returned during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect. If the Product is returned after the expiration of the limited warranty period, Nokias normal service policies shall apply and the Consumer will be responsible for all shipping charges. 9 YOU (THE CONSUMER) UNDERSTAND THAT THE PRODUCT MAY CONSIST OF REFURBISHED EQUIPMENT THAT CONTAINS USED COMPONENTS, SOME OF WHICH HAVE BEEN REPROCESSED. The used components comply with Product performance and reliability specifications. 10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE CONSUMERS SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.

[ 171 DRAFT ]

11 Some states do not allow limitation of how long an implied warranty lasts, so the one year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This limited warranty gives the Consumer specific legal rights and the Consumer may also have other rights which vary from state to state. 12 Nokia neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty including the provider or seller of any extended warranty or service agreement. 13 This is the entire warranty between the Nokia and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, relating to the Product, and no representation, promise or condition not contained herein shall modify these terms. 14 This limited warranty allocates the risk of failure of the Product between the Consumer and Nokia. The allocation is recognized by the Consumer and is reflected in the purchase price. 15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following purchase of the Product. 16 Questions concerning this limited warranty may be directed to:

Nokia Inc. Attn.: Customer Service 7725 Woodland Center Blvd., Suite. 150 Tampa, FL 33614 Telephone: 1-888-NOKIA-2U (1-888-665-4228) Facsimile: (813) 287-6612 TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6452) 17 The limited warranty period for Nokia supplied attachments and accessories is specifically defined within their own warranty cards and packaging.

[ 172 DRAFT ]

Appendix A Appendix A Message from the CTIA (Cellular Telecommunications & Internet Association) to all users of mobile phones. 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081

[ 173 ]

Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing. But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle--whether on the phone or not. The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same. But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need. When it comes to the use of wireless phones, safety is your most important call. Wireless Phone "Safety Tips"

Below are safety tips to follow while driving and using a wireless phone which should be easy to remember. 1 Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. 2 When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you. 3 Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. 4 Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend

[ 174 ]

Appendix A the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road. 5 Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a "to do" list while driving a car, you are not watching where you are going. Its common sense. Dont get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles. 6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue. 7 Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road. 8 Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!

9 Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a "Good Samaritan" in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. 10 Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely. The wireless industry reminds you to use your phone safely when driving.

[ 175 ]

For more information, please call 1-888-901-SAFE. For updates: http://www.wow-com.com/consumer/issues/driving/

articles.cfm?ID=85 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone:

(202) 785-0081

[ 176 ]

Appendix B Appendix B Message from the FDA (U.S. Food and Drug Administration) to all users of mobile phones. July 18, 2001...... For updates: http://www.fda.gov/cdrh/phones

[ 177 ]

Consumer Update on Wireless Phones U.S. Food and Drug Administration 1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy

(RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. 2. What is FDA's role concerning the safety of wireless phones?

Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:

Support needed research into possible biological effects of RF of the type emitted by wireless phones;

Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health. Environmental Protection Agency Federal Communications Commission FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:

National Institute for Occupational Safety and Health Occupational Safety and Health Administration National Telecommunications and Information Administration The National Institutes of Health participates in some interagency working group activities, as well. FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the

[ 178 ]

Appendix B RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document. 3. What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell mobile or PCS phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the users head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called cordless phones; which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits. 4. What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we dont know with certainty what the results of such studies mean for human health. Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-

term exposures, since the average period of phone use in these studies was around three years. 5.What research is needed to decide whether RF exposure from wireless phones poses a health risk?

A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-

day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.

[ 179 ]

6. What is FDA doing to find out more about the possible health effects of wireless phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world. 7. How can I find out how much radiofrequency energy exposure I can get by using my wireless phone?

All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC established these guidelines in consultation with FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the bodys ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects. Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phones RF exposure level in the online listing. 8. What has FDA done to measure the radiofrequency energy coming from wireless phones?

The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole

[ 180 ]

Appendix B body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines. 9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?

If there is a risk from these products--and at this point we do not know that there is-

-it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. 10. What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. 11. What about wireless phone interference with medical equipment?

Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation

(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a accompanied hearing aid at the same time. This standard was approved by the IEEE in 2000.

[ 181 ]

FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem. 12. Where can I find additional information?

For additional information, please refer to the following resources:

FDA web page on wireless phones http://www.fda.gov/cdrh/phones/index.html Federal Communications Commission (FCC) RF Safety Program http://www.fcc.gov/oet/rfsafety International Commission on Non-Ionizing Radiation Protection http://www.icnirp.de World Health Organization (WHO) International EMF Project http://www.who.int/emf National Radiological Protection Board (UK) http://www.nrpb.org.uk/

July 18, 2001 For updates: http://www.fda.gov/cdrh/phones

[ 182 ]