all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Manual | Users Manual | 2.79 MiB | / October 12 2005 | |||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | / October 12 2005 | ||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Internal Photos | / October 12 2005 | ||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Test Setup Photos | / October 12 2005 | ||||||
1 2 3 | Test Report | |||||||
1 2 3 | RF Exposure Info |
1 2 3 | Manual | Users Manual | 2.79 MiB | / October 12 2005 |
R1114_en.book Page 1 Friday, September 16, 2005 9:36 AM Nokia XXX User Guide 9237522 ISSUE 1 EN DRAFT legal-information1.fm Page 2 Thursday, September 22, 2005 11:19 AM DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-67 is in conformity with the provisions of the following Council Directive:
1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/
declaration_of_conformity/
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>. Copyright 2005 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia, Nokia Connecting People, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation. This product includes software licensed from Symbian Software Ltd (c) 1998-
200(5). Symbian and Symbian OS are trademarks of Symbian Ltd. Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Stac , LZS , 1996, Stac, Inc., 1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending. Hi/fn , LZS ,1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending. Part of the software in this product is Copyright ANT Ltd. 1998. All rights reserved. US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2005. Tegic Communications, Inc. All rights reserved. MPEG-4 Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided as is. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. FCC / INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference. ISSUE 1 EN, 9237522 R1114_en.book Page 3 Friday, September 16, 2005 9:36 AM For your safety...........................................6 Your Nokia N71.........................................9 Essential indicators............................................................... 9 Attach the wrist strap........................................................10 Configure settings...............................................................10 Nokia support on the Web................................................10 Help .........................................................................................10 Clock........................................................................................11 Volume and loudspeaker control ....................................12 File manager .........................................................................12 Useful shortcuts...................................................................14 Personalise your device .......................... 15 ProfilesSet tones...............................................................16 Transfer content from another device...........................17 Change the look of your device.......................................17 Active standby mode..........................................................18 Make calls ............................................... 20 Voice calls..............................................................................20 Video calls..............................................................................22 Video sharing .......................................................................23 Answer or reject a call .......................................................26 Log ...........................................................................................28 Contacts (Phonebook).............................31 Save names and numbers.................................................31 Copy contacts.......................................................................32 Add ringing tones for contacts .......................................33 Create contact groups .......................................................33 Camera......................................................36 Take pictures.........................................................................36 Edit images ...........................................................................41 Tips on taking good photographs...................................42 Record videos .......................................................................43 Edit video clips.....................................................................45 Gallery.......................................................50 View images and video clips............................................50 View presentations .............................................................51 Albums ...................................................................................51 Imaging.....................................................64 Image print ...........................................................................64 RealPlayer...........................................................................65 Movie Director .....................................................................67 Messaging.................................................69 Write text ..............................................................................70 Write and send messages .................................................72 3 R1114_en.book Page 4 Friday, September 16, 2005 9:36 AM Inboxreceive messages................................................... 75 My folders ............................................................................ 76 Mailbox.................................................................................. 76 Outboxmessages waiting to be sent.......................... 79 View messages on a SIM card......................................... 79 Messaging settings............................................................. 79 Calendar....................................................85 Create calendar entries ..................................................... 85 Calendar views..................................................................... 86 Remove calendar entries................................................... 86 Calendar settings ................................................................ 87 Web...........................................................88 Access the Web ................................................................... 88 Bookmarks view................................................................... 89 Make a connection............................................................. 89 Browse.................................................................................... 90 Download and purchase items........................................ 92 End a connection ................................................................ 92 Web settings......................................................................... 92 Office........................................................94 Calculator.............................................................................. 94 Converter............................................................................... 94 To-do ...................................................................................... 95 Notes ...................................................................................... 95 Recorder................................................................................. 96 My own.....................................................97 Go toadd shortcuts.......................................................... 97 IMInstant messaging (chat) ........................................ 97 Visual Radio .......................................... 104 Listen to the radio.............................................................105 View visual content..........................................................105 Saved stations....................................................................105 Settings................................................................................106 Connectivity .......................................... 107 Bluetooth connection ......................................................107 PC connections ..................................................................110 Connection manager........................................................111 Remote synchronisation..................................................112 Device manager.................................................................113 Tools....................................................... 115 Settings................................................................................115 Cover display settings......................................................124 Voice commands ...............................................................124 Memory card tool..............................................................125 Application manager........................................................126 Activation keyshandle copyright-protected files .128 4 R1114_en.book Page 5 Friday, September 16, 2005 9:36 AM Troubleshooting .................................... 129 Q&A ...................................................................................... 129 Battery information.............................. 132 Charging and discharging.............................................. 132 Nokia battery authentication guidelines................... 132 Care and maintenance ......................... 134 Additional safety information............. 135 5 R1114_en.book Page 6 Friday, September 16, 2005 9:36 AM For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless phones may be susceptible to interference, which could affect performance. SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the phone off near medical equipment. SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft. SWITCH OFF WHEN REFUELLING Do not use the phone at a refuelling point. Do not use near fuel or chemicals. SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the phone where blasting is in progress. USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. 6 R1114_en.book Page 7 Friday, September 16, 2005 9:36 AM CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service. The keypad is active only in the Fold open mode. Press as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press location. Do not end the call until given permission to do so. Give your About your device The wireless device described in this guide is approved for use on the EGSM 900/1800/1900 and UMTS 2100 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect privacy and legitimate rights of others. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger. Network Services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Network features are designated in this guide by (network services). Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail and content downloading via 7 For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. R1114_en.book Page 8 Friday, September 16, 2005 9:36 AM browser or over MMS, require network support for these technologies. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Enhancements, batteries, and chargers Always switch the device off and disconnect the charger before removing the battery. Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3 and AC-4 charger, and from an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or LCH-12 charger when used with the charger adapter CA-44 delivered with your phone. The battery intended for use with this device is BL-5B. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. 8 R1114_en.book Page 9 Friday, September 16, 2005 9:36 AM Your Nokia NXX Settings Your Nokia NXX normally has MMS, GPRS, streaming, and Internet settings automatically configured in the device, based upon your service provider or network operator information. You may have settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message. Transfer content from another device You can copy content such as contacts and calendar entries from a compatible Nokia phone to your Nokia NXX using Bluetooth connectivity or infrared. The type of content that can be copied depends on the phone model. Copyright protections may prevent some images, music
(including ringing tones), and other content from being copied, modified, transferred or forwarded. You can insert your SIM card in the other device. When Nokia N80 is switched on without a SIM card, the offline profile is automatically activated. To avoid duplicate entries, you can transfer the same type of information (for example, contacts) from the other device to your Nokia XXX only once. Transfer content 1 Press
, and select Tools > Transfer > Copy data on your Nokia XXX. 2 In the information view, select Continue. 3 Select whether you want to use Bluetooth connectivity or infrared to transfer the data. Both devices must support the selected connection type. 4 If you select Bluetooth connectivity:
To have Nokia XX search for devices with Bluetooth connectivity, select Continue. Select your other device from the list. You are asked to enter a code on your Nokia XXX. Enter a code (1-16 digits), and select OK. Enter the same code on the other device, and select OK. The devices are now paired. See Pair devices, p. 78. For some phone models, the Transfer application is sent to the other device as a message. To install Transfer on the other device, open the message, and follow the instructions on the display. If you select infrared, connect the two devices. See Infrared connection, p. 79. X X N a i k o N r u o Y 9 R1114_en.book Page 10 Friday, September 16, 2005 9:36 AM 5 From your Nokia XXX, select the content you want to copy from the other device. Content is copied from the memory and memory card (if inserted) of the other device to the corresponding location in your Nokia XXX and memory card (if inserted). Copying time depends on the amount of data to be transferred. You can cancel copying and continue later. Essential indicators The device is being used in a GSM network. The device is being used in a UMTS network (network service). You have one or more unread messages in the Inbox folder in Messaging. You have received new e-mail in the remote mailbox. There are messages waiting to be sent in the Outbox folder. You have missed calls. Shown if Ringing type is set to Silent and Message alert tone, IM alert tone, and E-mail alert tone are set to Off. The device keypad is locked. A clock alarm is active. The second phone line is being used (network service). All calls to the device are diverted to another number. If you have two phone lines (network service), the indicator for the first line is and for the second
. A headset is connected to the device. The connection to a headset with Bluetooth connectivity has been lost. A loopset is connected to the device. A TTY is connected to the device. A data call is active. A GPRS or EDGE packet data connection is available. A GPRS or EDGE packet data connection is active. A GPRS or EDGE packet data connection is on hold. A UMTS packet data connection is available. A UMTS packet data connection is active. A UMTS packet data connection is on hold. Bluetooth connectivity is on. Data is being transmitted using Bluetooth connectivity. A USB connection is active. X X N a i k o N r u o Y 10 R1114_en.book Page 11 Friday, September 16, 2005 9:36 AM An infrared connection is active. If the indicator is blinking, the device is trying to connect to the other device or the connection has been lost. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Keypad lock (keyguard) To lock the keys, close the sliding keypad, and select Yes when Lock keypad? is displayed. To lock the keys when the slide is closed, press the power key, and select Lock keypad. To unlock, open the sliding keypad, or press and select OK when Unlock keypad? is displayed. When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.
(Unlock), Volume and loudspeaker control To increase or decrease the volume level when you have an active call or are listening to a sound, press
. The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear. or To use the loudspeaker during a call, select Options >
Activate loudsp.. To turn off the loudspeaker, select Options > Activate handset. Clock
, and select Clock. To set a new alarm, select is Press Options > Set alarm. When an alarm is active, shown. To turn off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze. If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. To cancel an alarm, select Clock > Options > Remove alarm. X X N a i k o N r u o Y 11 R1114_en.book Page 12 Friday, September 16, 2005 9:36 AM Clock settings To change the clock settings, select Clock > Options >
Settings. To change the time or date, select Time or Date. To change the clock shown in the standby mode, select Clock type > Analog or Digital. To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Auto time update > On. To change the alarm tone, select Clock alarm tone. World clock To open the world clock view, open Clock, and press
. In the world clock view, you can view the time in different cities. To add cities to the list, select Options > Add city. You can add a maximum of 15 cities to the list. To set your current city, scroll to a city, and select Options > My current city. The city is displayed in the clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone. X X N a i k o N r u o Y 12 Headset Connect a compatible headset to the Pop-PortTM connector of your device. Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Wrist strap Thread the strap as shown, and tighten it. Memory card You can purchase a compatible miniSD memory card and use it as extra storage space to save the memory on your device. You can also back up information from your device to the memory card. R1114_en.book Page 13 Friday, September 16, 2005 9:36 AM Use only compatible miniSD memory cards with this device. Other memory cards, such as Reduced Size MultiMediaCards, do not fit in the memory card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted. Keep all memory cards out of the reach of small children. Insert the memory card 1 To insert the memory card, place your finger in the recess on top of the door of the memory card slot, and open the door. 2 Insert the memory card in the slot. Make sure that the contact area on the card is facing up and towards the slot with the bevelled corner facing the base of the device. 3 Push the card in. You can hear a click when the card locks into place. 4 Close the door. You cannot use the memory card if the door is open. Eject the memory card 1 Before you eject the card, press the power key, and select Remove mem. card. All applications are closed. 2 When Remove memory card and press 'OK' is displayed, open the door of the memory card slot. 3 Press the memory card to release it from the slot. 4 Remove the memory card. If the device is switched on, select OK. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. Memory card tool
, and select Tools > Memory. You can use a Press miniSD memory card as extra storage space and for backing up the information in the device memory. X X N a i k o N r u o Y 13 R1114_en.book Page 14 Friday, September 16, 2005 9:36 AM X X N a i k o N r u o Y To back up information from the device memory to a memory card, select Options > Backup phone mem. To restore information from the memory card to the device memory, select Options > Restore from card. Format a memory card When a memory card is reformatted, all data on the card is permanently lost. Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it. To format a memory card, select Options > Format mem. card. Select Yes to confirm. File manager Many features of the device, such as contacts, messages, images, videos, ringing tones, calendar notes, documents, and downloaded applications, use memory to store data. The free memory available depends on how much data is already saved in the device memory. You can use a memory card as extra storage space. Memory cards are rewritable, so you can delete old information and save new data on a memory card. 14
) opens. Press
) (if available). and To browse files and folders in the device memory or on a
, and select Tools > File memory card (if inserted), press mgr.. The device memory view (
to open the memory card view (
To move or copy files to a folder, press at the same time to mark a file, and select Options > Move to folder or Copy to folder. To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name. View memory consumption To view what types of data you have in the device and how much memory the different data types consume, select Options > Memory details. The amount of available free memory is shown in Free memory. Memory lowfree memory The device notifies you if the device or the memory card memory is low. To free device memory, transfer data to a memory card, if you have one. Mark files to be moved, and select Move to folder > Memory card, and a folder. R1114_en.book Page 15 Friday, September 16, 2005 9:36 AM You can also transfer media files to a compatible PC, for example, using the transfer option in Gallery. See Gallery, p. 29. Tip! You can use Nokia Phone Browser available in Nokia PC Suite to view the different memories in your device and transfer data. To remove data to free memory, use File mgr., or go to the respective application. For example, you can remove the following:
Messages from Inbox, Drafts, and Sent folders in Messaging Retrieved e-mail messages from the device memory Saved Web pages Saved images, videos, or sound files Contact information Calendar notes Downloaded applications. See also Application manager, p. 98. Any other data that you no longer need Useful shortcuts Use shortcuts to quickly get the most from your device. Refer to the relevant sections in this user guide for further details of the functions. Standby mode To switch between applications that are open, press
, and select an application. If memory is and hold low, the device may close some applications. The device saves any unsaved data before closing an application. Leaving applications running in the background increases the demand on battery power and reduces the battery life. To start the camera, press and hold the capture key for more than 1 second. To call your voice mailbox (network service), press and hold
. To open multimedia applications, press or press and hold
. See ICON- Media key, p. 88. To change the profile, press
, and select a profile. To switch between Normal and Silent profiles, press
. If you have two phone lines, this action and hold switches between the two lines. To open the last dialed numbers list, press To use voice commands, press and hold
. To start a connection to Web, press and hold
. See Web, p. 64. For further shortcuts available in the standby mode, see Active standby mode, p. 87. X X N a i k o N r u o Y 15 Tutorial The tutorial gives you information about some of the features of your device. To access the tutorial in the menu,
, and select My own > Tutorial and the section press you want to view. R1114_en.book Page 16 Friday, September 16, 2005 9:36 AM Edit text and lists To mark an item in a list, scroll to it, and press and at the same time. To mark multiple items in a list, press and hold while you press
, then release or
. To end the selection, release To copy and paste text: To select letters and words,
. At the same time, press press and hold to highlight text. To copy the text to clipboard, while
, select Copy. To insert the text into a still holding document, press and hold
, and select Paste. or Help Your device has context-sensitive help. When an application is open, select Options > Help to access help for the current view. When you are reading the instructions, to switch between help and the application that is open in the background, press and hold To open help from the main menu, select Tools > Help. Select the desired application to view its help topics. X X N a i k o N r u o Y 16 R1114_en.book Page 17 Friday, September 16, 2005 9:36 AM Camera Your Nokia Nxx has two cameras, a high resolution camera on the back of the device, and a lower resolution camera above the main display, which is visible when the cover is opened. Both cameras can be used to take still pictures and video. To activate the camera, open the cover, and select Camera. In the viewfinder, you can see the view to be captured. To switch between cameras, select Options > Use front camera or back camera. The images and video clips are automatically saved in the Gallery. The cameras produce .jpeg images. Video clips are recorded in the .3gpp file format with the .3gp file extension (Normal and Sharing video quality modes) or in the .mp4 file format (High video quality mode). See Video settings, p.17. You can send images in a multimedia message as an e-mail attachment, or by using a Bluetooth connection. Tip! You can insert an image into a contact card. See Save names and numbers, p.61 Your Nokia Nxx supports an image capture resolution of up to 1600 x 1200 pixels using the back camera. The image resolution in these materials may appear different. Take pictures If the camera is in video mode, open the image mode by selecting Options > Image mode. To select the front camera to, for example, include yourself in the picture, select Options > Use front camera. To use the main camera again, select Options >
Use back camera. To take a picture, press the image is saved. The image is saved automatically in the Images&Video folder of Gallery. See Gallery, p. 29. To view the Last image, to select Image scenes, or to adjust Flash or White balance settings before taking a picture:
If the viewfinder is active, press
. Do not move the phone before to activate or the camera setup settings. a r e m a C 17 R1114_en.book Page 18 Friday, September 16, 2005 9:36 AM a r e m a C Press or to choose the item to be viewed or adjusted, and press available depend on which camera is selected??. The settings Graphic: Screenshot to indicate the setup (lower) part of the screen being active. To re-activate the viewfinder, press Cancel or
. See Setup settingsAdjust colour and lighting, p. 12, and Scenes, p. 12. Imaging mode camera indicators show the following:
The phone memory (
) and memory card (
indicators (1) show where images are saved.
) The images indicator (2) estimates how many images, depending on the selected image quality, can fit in the remaining memory of your phone or the memory card. The scene indicator (3) shows the active scene. See Scenes,p. 12. Graphic: Screenshot to show position of the indicators (to be numbered). The flash indicator (4) shows if the flash is set to Automatic (AF), , On (
), or Off (
). The night mode indicator
(5) shows that night mode is active. The self-timer indicator
(6) shows that the self-timer is activated. See You in the pictureself-
timer, p. 11. The sequence mode indicator (7) shows that the sequence mode is active. See Take pictures in a sequence, p. 11. or to zoom in and zoom out. The zoom Press indicator, which appears on the side of the viewfinder, shows the zoom level. Saving the captured image may take longer if you change the zoom, lighting, or colour settings. When taking a picture, note the following:
Keep the camera still by using both hands. To take images in different environments, use the 18 proper scene for each environment. See Scenes, p. 12. The quality of a zoomed picture is lower than that of a non-zoomed picture. R1114_en.book Page 19 Friday, September 16, 2005 9:36 AM The camera goes into battery saving mode if you do not make any key presses for a while. To continue taking pictures, press
. After the image is taken:
If you do not want to keep the image, select Options >
Delete. To send the image Via multimedia, Via e-mail, or Via Bluetooth, select Options > Send. For more information, see Messaging, p. 38 and Bluetooth connectivity, p. 76. This option is not available during an active call. To send an image to the other party during an active call, select Options > Send to caller. To edit the picture, select Options > Edit. See Edit images, p. 14. To print the picture, select Options > Print. See Image print, p. 33. Take pictures in a sequence Select Options > Time lapse to set the camera to take six pictures in a sequence. You can set the time lapse to be Fast, Med or Slow. The pictures are automatically saved in Gallery. Graphic: Screenshot to show a grid of pictures in Gallery. You can also use the sequence mode with the Self-timer. See You in the pictureself-timer, p. 11. After taking the pictures, they are shown in a grid on the main display. To view a picture, press to open it. To return to the sequence mode viewfinder, press ????. You in the pictureself-timer Use the self-timer to delay the taking of a picture so that you can include yourself in the picture. To set the self-timer delay, select Options > Self-timer > 10 seconds, 20 seconds or 30 seconds. To activate the self-
timer, select Activate. The self-timer indicator (
) blinks and the phone beeps when the timer is running. The camera takes the picture after the selected delay has elapsed. You can also use the Self-timer in the sequence mode. See Take pictures in a sequence, p. 11. The flash Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture. a r e m a C 19 R1114_en.book Page 20 Friday, September 16, 2005 9:36 AM or to highlight Flash and The camera has an LED flashlight for low light conditions. The following flashlight modes are available: Automatic, On, and Off. To use the flash, press select On. If the flash is set to Off or Automatic during bright conditions, the flash still emits a low light when an image is captured. This allows the subject of the picture to see when the picture is taken. There is no flash effect on the resultant picture. Setup settingsAdjust colour and lighting To enable the camera to reproduce colours and lighting more accurately, or to add effects to your pictures or videos, select Options > Open setup and select from the following:
Video scenes/Image scenesSelect a scene which is appropriate for the environment in which you are taking pictures. See Scenes, p. 12. Flash (images only)Set the flash according to the lighting conditions. See The flash, p. 11. White balanceSelect the appropriate setting which matches the lighting conditions. This allows the camera to reproduce colours more accurately. Colour toneSelect the colour effect you want. The display changes to match any settings made. The settings return to the default settings when you close the camera. If you select a new scene, the settings are replaced by the settings of the selected scene. See Scenes, p. 12. If you need to change the setup settings, however, you can change them after selecting a scene. The settings available will vary depending on whether you have the front or main camera selected. Scenes A scene helps you to obtain the correct colour and lighting settings for the current environment. Select the appropriate scene for taking pictures or recording video clips from the scenes list. The settings of each scene have been set to match a certain style or environment. Select Options > Open setup > Video scenes/Image scenes:
Video scenes Normal (default)Use this scene in any conditions. NightUse this scene in low light conditions. The night mode is indicated with Image scenes Automatic (default)Use this scene in any conditions. a r e m a C 20 R1114_en.book Page 21 Friday, September 16, 2005 9:36 AM Graphic: Screenshot to show landscape scene??
See Gromit. User definedUse this scene to create a personalised scene with your own settings. PortraitUse this scene to take portrait pictures, such as head shots and sitting poses. LandscapeUse this scene when you take pictures of objects that are further away. NightUse this scene in low light conditions. The night mode is indicated with
. SportsUse this scene to take pictures of fast moving objects. Note that when you use this scene, the resolution of the images is reduced from 1600x1200 to 800x600. See Picture quality, p.14. When taking pictures, the default scene is Automatic. If you select the User defined scene however, it is set as the default scene. To make your own scene suitable for a certain environment, select User defined scene. In the user scene you can adjust Based on mode, Flash, White balance, and Colour tone, and Reset user scene options. To copy the settings of another scene, select Based on mode and the desired scene. Adjust still image camera settings There are two kinds of settings for the still image camera:
Image setup settings and main settings. To adjust Image setup settings, see Setup settingsAdjust colour and lighting, p. 12. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:
Image qualityHigh 2M - Print (resolution 1600x1200), Med 0.8M - Email (resolution 800x600) or Low 0.3M -
Multimedia (resolution 640x480). The better the image quality, the more memory the image consumes. Use High 2M - Print for large prints up to 10x8in /25x20cm, Med 0.8M - Email for e-mail and prints up to 6x4in/15x10cm, or Low 0.3M - Multimedia for use in a multimedia message. The quality of a zoomed picture is lower than that of a nonzoomed picture. Add to albumSelect whether you want to save the image to a certain album in the gallery. If you select Yes, a list of available albums opens. Extended zoomSelect On if you want to achieve maximum zoom but are prepared to accept lower image resolution (this may then be lower than you have selected with the Image quality setting. If you want to limit the a r e m a C 21 R1114_en.book Page 22 Friday, September 16, 2005 9:36 AM zoom to where the selected image resolution/quality is maintained, select On. IS THIS CORRECT??
Show captured imageSelect On if you want to see the captured image after it is taken, or Off if you want to continue taking pictures immediately. Capture toneSelect Click or Beep as the tone you hear when you take a picture.. Memory in useSelect where to store your images. Edit images To edit the pictures after taking them, or the ones already saved in Gallery, select Images & Videos > Options >
Edit, and scroll to an image. Select Options > Apply effect to, for example, crop and rotate the image; adjust the brightness, colour, contrast, compression, and resolution; also, to add effects, text, clip art, or a frame to the picture. To crop an image, select Options > Apply effect > Crop. A cross appears on the upper right corner of the image. Select the area to be cropped by moving the scroll key, and select Set. Another cross appears on the lower left corner. Again select the area to be cropped. The selected areas form a rectangle, which forms the cropped image. To reduce redness of the eyes in an image, select Options >
Apply effect > Red eye reduction. Move the cross onto the eye, and press the scroll key. A loop appears on the display. To resize the loop to fit the size of the eye, move the scroll key. Press the scroll key to reduce the redness. To add clip art to an image, select Options > Apply effect > Clip art. Select the item you want to add from the list, and press the scroll key. To move, rotate, and change the size of the item, select Options > Move, Resize, or Rotate. To add text to an image, select Options > Apply effect >
Text. Enter the text, and select OK. To edit the text, select Options > Move, Resize, Rotate, or Colour. Shortcuts in the image editor:
To view an image in full screen, press
. To return to the normal view, press again. To rotate an image clockwise or counterclockwise, press. and
. To zoom in or zoom out, press and
. Tips on taking good photographs Picture quality Use the appropriate picture quality. The camera has four picture quality settings: Fine (1600x1200), Standard a r e m a C 22 R1114_en.book Page 23 Friday, September 16, 2005 9:36 AM
(800x600), Basic (640x480) and MMS (xx??.). Use the Fine setting to make sure that the camera produces the best picture quality available. Note however, that better picture quality requires more storage space. For MMS and e-mail attachments it may be necessary one of the other settings???. To define the quality in the image mode in the camera, select Options > Settings.. Background Use a simple background. For portraits and other pictures with people, avoid having your subject in front of a cluttered, complex background that may distract attention from the subject. Move the camera, or the subject, when these conditions cannot be met. Move the camera closer to the object to take clearer portraits. Depth When taking pictures of landscapes, add depth to your pictures by placing objects in the foreground. Note however, that if the foreground object is too close to the camera, it may be blurred. Lighting conditions Changing the source, amount, and direction of light can change photographs dramatically. Here are some typical lighting conditions:
Light source behind the subject. Avoid placing your subject in front of a strong light source. If the light source is behind the subject or visible in the display, the resulting picture may have weak contrast, may be too dark, and may contain unwanted lighting effects. You can use the flash to add more lighting to shadows. See The flash, p. 11. Sidelit subject. Strong side light gives a dramatic effect but may be too harsh, resulting in too much contrast. Light source in front of the subject. Harsh sunlight may cause the subjects to squint their eyes. The contrast may also be too high. Optimal lighting is found in situations where there is plenty of diffused, soft light available; for example, on a bright, partially cloudy day or on a sunny day in the shadow of trees. Record videos If the camera is in image mode, select video mode by selecting Options > Video mode. To select the front camera to, for example, include yourself in the video, select Options > Use front camera. To use the main camera again, select Options > Use back camera. a r e m a C 23 R1114_en.book Page 24 Friday, September 16, 2005 9:36 AM a r e m a C 1 Press the scroll key to start recording. The record icon is shown. The LED flash is lit, and a tone sounds, indicating to the subject that video is being recorded. There is no flash effect on the resultant video. 2 To pause recording at any time, select Pause. The pause icon blinks on the display. Video recording automatically stops if recording is set to pause and there are no key presses within a minute. 3 Select Continue to resume recording. 4 Select Stop to stop recording. The video clip is automatically saved to the Images&Video folder of Gallery. See Gallery, p. 9. To view the Last video clip, to select Video scenes, or to adjust White balance or Colour tone before recording a video:
If the viewfinder is or active, press to activate the camera setup settings. Graphic: Screenshot to indicate the setup (lower) part of the screen being active. Press or to
. The settings choose the item to be viewed or adjusted, and press available depend on which camera is selected. 24
. To re-activate the viewfinder, press Cancel or See Setup settingsAdjust colour and lighting, p. 12, and Scenes, p. 12. Video recorder indicators show the following - ED:
WHAT ARE THE ACTUAL ISETTA ICONS?. The phone memory (
) and memory card (
indicators (1) show where the video is saved. The current video length indicator (2) shows elapsed time and time remaining. The mode indicator (3) shows the active mode. See Scenes, p. 12. The microphone indicator (4) shows that the microphone is muted. The file format indicator (5) indicates the format of the video clip. The zoom indicator, which appears on the side pane, shows the zoom level. Scroll up or down to zoom in or zoom out After a video clip is recorded:
To immediately play the video clip you just recorded, select Options > Play. R1114_en.book Page 25 Friday, September 16, 2005 9:36 AM If you do not want to keep the video, select Options >
Delete. To return to the viewfinder to record a new video, press the scroll key. To send the video Via multimedia, Via e-mail, or Via Bluetooth, select Options > Send. For more information, see Messaging, p. 38 and Bluetooth connectivity, p. 76. This option is not available during an active call. To send a video clip to the other party during an active call, select Options > Send to caller. To edit the video, select Options > Edit. See also Edit video clips on p.18. Video settings There are two kinds of settings for the video recorder: video setup settings and main settings. To adjust video setup settings, see Setup settingsAdjust colour and lighting, p. 12. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:
Audio recordingSelect On if you want to record both image and sound.
(High),
(Normal), or Video qualitySet the quality of the video clip to High, Normal, or Sharing. The quality is indicated with one of the following icons:
(Sharing). If you select High or Normal, the length of the video recording is restricted by the available space on your memory card, and up to 1 hour per clip. If you want to view the video on a TV or PC, select High video quality, which has CIF resolution (352x288) and file format .mp4. You cannot send video clips saved in the .mp4 format in a multimedia message. If you want to view the clip in mobile phones, select Normal, which has QCIF resolution
(176x144) and file format .3gp. To send the video clip through MMS, or send it through video sharing, select Sharing (QCIF resolution, file format .3gp). See Video sharing (network service), p. 54. The video clip is limited to 300 kB (approximately 20 seconds in duration) so that it can be conveniently sent as a multimedia message to a compatible device. Some networks, however, may only support sending of multimedia messages with a maximum size of 100 kB. Contact your service provider for more information. Add to albumSelect Yes to save the recorded video clip to a particular album in Gallery. Show captured videoSelect Off to record a video clip immediately after another. Your videos are not played after being recorded, and the video recorder is ready for use again. a r e m a C 25 R1114_en.book Page 26 Friday, September 16, 2005 9:36 AM a r e m a C Default video nameSelect Date or Text as the default name for videos you record. Capture toneSelect Click or Beep as the default name for videos you record. Memory in useChoose the default memory store: phone memory or memory card. Edit video clips You can edit video clips in Gallery. See Gallery, p.9. To edit video clips and create custom video clips, scroll to a video clip, and select Options > Edit. You can create custom video clips by combining and trimming video clips, and adding images, sound clips, transitions, and effects. Transitions are visual effects that you can add to the beginning and end of the video or between the video clips. In the video editor you can see two timelines: video clip timeline and sound clip timeline. If you add images, text, or transitions to a video clip, they are shown on the video clip timeline. To move on the timelines, press
. To switch between the timelines, press or or
. 26 Edit video, sound, image, text, and transitions To create custom video clips, mark and select one or more video clips, and select Options > Edit. In the Edit video view, you can insert video clips to make a custom video clip, and edit the clips by trimming and adding effects. You can add images and sound clips and change their duration, and also add text and images to the clip. To modify the video, select from the following options:
Edit video clip:
CutTrims the video clip in the Cut video clip view. Add colour effectInserts a colour effect in the video clip. Use slow motionSlows the speed of the video clip. Mute audio/Unmute audioMutes or unmutes the original video clip sound. MoveMoves the video clip to the selected location on the timeline. RemoveRemoves the video clip from the video. DuplicateMakes a copy of the selected video clip. Edit text (shown only if you have added text)To move, remove or duplicate text; change the colour and style of R1114_en.book Page 27 Friday, September 16, 2005 9:36 AM the text; define how long it stays on the screen; and add effects to the text. Edit image (shown only if you have added an image)To move, remove or duplicate an image; define how long it stays on the screen; and set a background or a colour effect to the image. Edit audio clip:
CutTrims the sound clip in the Cut sound clip view. MoveMoves the sound clip to the selected location on the timeline. RemoveRemoves the sound clip from the video. DuplicateMakes a copy of the selected sound clip. Change durationChanges the length of the sound clip. Edit transitionThere are three types of transitions: at the start of a video, at the end of a video, and transitions between video clips. A start transition can be selected when the first transition of the video is active. Insert:
Video clipInserts the selected video clip. A thumbnail of the video clip is shown in the main view. A thumbnail consists of the first non-black frame of the video clip. The name and length of the selected video clip is also shown. ImageInserts the selected image. A thumbnail of the image is shown in the main view. TextInserts text to the video clip. You can insert a title, subtitle, or credits. Audio clipInserts the selected sound clip. The name and length of the selected sound clip is shown in the main view. New audio clipRecords a new sound clip to the selected location. MovieTo preview the movie in full screen or as a thumbnail, save or send the movie, or cut the movie to a suitable size for sending it in a multimedia message. Tip! To take a snapshot of a video clip, select Options > Take snapshot in the thumbnail Preview view or in the Cut video view. To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. The default is the phone memory. Tip! In the Settings view, you can define Default video name, Default snapshot name, Save quality, and Memory in use. a r e m a C 27 R1114_en.book Page 28 Friday, September 16, 2005 9:36 AM a r e m a C Select Send > Via multimedia, Via e-mail, or Via Bluetooth if you want to send the video. Contact your service provider for details of the maximum multimedia message size that you can send. If your video is too large to be sent in a multimedia message, the symbol appears. Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth. See Send data using Bluetooth connectivity, p. 78. You can also transfer your videos using Bluetooth into your Bluetooth-enabled personal computer, or by using a memory card reader (enhancement). 28 R1114_en.book Page 29 Friday, September 16, 2005 9:36 AM Gallery To store and organise your images, video clips, sound clips, playlists, and streaming links, press
, and select Gallery.
> Images&Video. To open the gallery from the Camera application, select Options > Go to Gallery. In Camera, only the Images & video folder is available. Tip! To switch from Gallery to the camera, select Camera from the Images & video folder. Select Images&Video Tracks
, Sound clips
, Links
, and press
, or All to Presentations files open it.. You can browse and open folders, mark, copy, and move items to folders and albums. Sound clips, video clips, .ram files, and streaming links are opened and played in the RealPlayer application. See RealPlayer, p. 34. You can also create albums; and mark, copy, and add items to albums. See Albums, p. 11. Tip! You can transfer images from your device to a compatible PC with Nokia Phone Browser available in Nokia PC Suite. See the CD-ROM supplied with your phone. to open a file. Videos, music, and sound clips Press open in RealPlayer. See View images and video clips, p. 10. To copy or move files to the memory card or to phone memory, select a file and Options > Organise > Copy to memory card/Move to memory card or Copy to phone mem./Move to phone mem.. Files stored on the memory card are indicated with To reduce the size of files that you have already copied to other locations (such as a PC) and so increase free memory space, in the Images&vidos folder select a file and Options > Free memory. To download files into Gallery in one of the main folders using the browser, select Graphic downls. or Video downlds., Track downlds., or Sound downlds.. The browser opens, and you can select a bookmark from which the site can download. y r e l l a G 29 R1114_en.book Page 30 Friday, September 16, 2005 9:36 AM
(High),
(Normal), and View images and video clips Pictures taken and video clips recorded with the camera are stored in the Images&Video folder in Gallery. The quality of a video clip is indicated with one of the following icons:
(Low) and
(Sharing). Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, or through a Bluetooth connection. To be able to view a received image or video clip in the gallery or in the media player, you must save it in the phone memory or on a memory card. Open the Images&Video folder in Gallery. The images and video clip files are in a loop, and ordered by date. To browse individual files, press groups, press To edit a photo or a video clip, select Options > Edit. An image editor or a video editor opens. To add an image or a video clip to an album in the gallery, select Options > Albums. > Add to album. See Albums, p. 11. To create custom video clips, select a video clip, or several clips, in the gallery, and select Options > Edit.. See Edit video clips, p. 26. To browse files in or or
. To print your images on a printer connected to your phone, or to store them on your MMC for printing, select Options > Print. See Image print, p. 33. To zoom an image, select Options > Zoom in or Zoom out. The zooming ratio is at the top of the display. The zooming ratio is not stored permanently. Slide show Use Slide show to view images and video clips in the full screen mode. Select from the following:
Startto start the slide show. Playto open the RealPlayer application. Pauseto pause the slide show Continueto resume the slide show Endto close the slide show. Press Press To add sound to the slide show, in the Images&Video folder, select Options > Slide show > Music settings and from the following:
MusicSelect On, or Off. TrackSelect a music file from the list. VolumePress
(slower) to adjust the Tempo.
(next) to browse the thumbnails. to decrease the volume, or
(faster) or
(previous) or to increase the volume. y r e l l a G 30 R1114_en.book Page 31 Friday, September 16, 2005 9:36 AM Presentations With presentations, you can view SVG (scaleable vector geometry) files. SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions. To view SVG files, select the Presentations folder, scroll to an image, and select Options > Play. Albums With albums you can conveniently manage your images and video clips. To view the albums list, in the Images&Video folder, select Options > Albums > View albums. The albums are ordered alphabetically. To view the content of an album, press the scroll key. To create a new album, select Options > New album. Enter a name for the album, and select OK. To add a picture or a video clip to an album in the gallery, scroll to a picture or video clip, and select Options >
Albums. > Add to album. A list of albums opens. Select the album to which you want to add the picture or video clip, and press the scroll key. To remove a file from an album, press deleted from the Images&Video folder in Gallery. The file is not y r e l l a G 31 R1114_en.book Page 32 Friday, September 16, 2005 9:36 AM Media applications Music player
, and select Music plyr.. With the music player, Press you can play music files and create and listen to playlists. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Add music When you open the music player for the first time, the player searches the device memory for music files to create a music library. Copyright protections may prevent some images, music
(including ringing tones), and other content from being copied, modified, transferred or forwarded. After you add or remove music files in the device, update your music library. Select Options > Music library >
Options > Update Music library. Tip! You can transfer music files from your device to your memory card (if inserted) with Nokia Audio Manager available in Nokia PC Suite. Play music When you open the music player, the previously played track or playlist is displayed. To view the music library, select qgn_indi_mup_button_mc_inact or Options >
Music library and the desired song list. To start playing the songs in the view, select Options > Play. When a song is playing, to change between play and pause, press qgn_indi_mup_button_play_hl/
qgn_indi_mup_button_pause_hl. To stop a song, press qgn_indi_mup_button_stop_inact. To fast forward or rewind, press and hold qgn_indi_mup_button_prev_inact or qgn_indi_mup_button_next_inact. To start playing the next or previous song, press qgn_indi_mup_button_prev_inact or qgn_indi_mup_button_next_inact. To view the currently played song list, select qgn_indi_mup_button_playlist_inact or Options > Open Now playing. To save the song list as a playlist, select s n o i t a c i l p p a a i d e M 32 R1114_en.book Page 33 Friday, September 16, 2005 9:36 AM Options > Add to track list, and create a new playlist, or select a saved playlist. To adjust the volume, press To select between random play and normal play mode, select Options > Random play. To select whether playing stops at the end of the playlist or restarts from its beginning, select Options > Loop.
???Icons in Music plyr.: Repeat;
Random;
or
. Repeat and random; and Loudspeaker muted.???
Tip! To leave the application open and music playing in the background, press standby mode. To return to the application, press and select Music plyr.. twice to return to the
, To open your Web bookmarks for downloading music, select Options > Track downloads. To return to the standby mode and leave the music playing in the background, select Options > Play in background. Music library To view the music library, select Options > Music library. All tracks lists all music. To view sorted songs, select Albums, Artists, Genres, or Composers. The album, artist, genre, and composer information is collected from the ID3 or M4A tags of the song files, if available. To add songs, albums, artists, genres or composers to a playlist, select the items and Options > Add to track list. You can create a new playlist or add to an existing one. To view playlists, select Track lists. To create a new playlist, select Options > New track list. When viewing a playlist you have created yourself, to add more songs, select Options > Add tracks. To delete a playlist, press deletes the playlist, not the music files. Deleting a playlist only Image print To print images with Image print, select the image you want to print, and the print option in the gallery, camera, image editor, or image viewer. Use Image print to print your images using a data cable, Bluetooth connectivity, or your memory card (if available). You can only print images that are in .jpeg format. The pictures taken with the camera are automatically saved in
.jpeg format. Note: To print to a PictBridge-compliant printer, connect the data cable before you select the print option. s n o i t a c i l p p a a i d e M 33 R1114_en.book Page 34 Friday, September 16, 2005 9:36 AM Printer selection When you use Image print for the first time, a list of available printers is displayed after you select the image. Select a printer. The printer is set as the default printer. If you have connected a PictBridge-compliant printer using the CA-53 cable, the printer is automatically displayed. If the default printer is not available, a list of available printing devices is displayed. To change the default printer, select Options > Settings >
Default printer. Print preview The print preview view opens only when you start printing an image in the gallery. The selected images are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, scroll up or down to display the additional pages. Print settings The available options vary, depending on the capabilities of the printing device you selected. To set a default printer, select Options > Default printer. To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view. RealPlayer
, and select Imaging > RealPlayer. With Press RealPlayer, you can play video clips, sound clips, and playlists, or stream media files over the air. You can activate a streaming link when you browse Web pages, or store it in the device memory or memory card (if inserted). RealPlayer supports files with extensions such as .3gp,
.mp4 or .rm. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. For example, RealPlayer attempts to open all .mp4 files, but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by this device. Play video or sound clips 1 To play a media file stored in device memory, or on the memory card (if inserted), select Options > Open and from the following:
s n o i t a c i l p p a a i d e M 34 R1114_en.book Page 35 Friday, September 16, 2005 9:36 AM Most recent clipsto play one of the last six files played in RealPlayer Saved clipto play a file saved in Gallery. See Gallery, p. 29. 2 Scroll to a file, and press to play the file. Tip! To view a video clip in full screen mode, press
. Press again to change back to normal screen mode. Shortcuts during play:
To fast forward, press and hold To rewind through the media file, press and hold To mute the sound, press and hold is until
. displayed. To turn on the sound, press and hold until you see
. Stream content over the air Many service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point. The access points may be configured when you first start your device. Contact your service provider for more information. Note: In RealPlayer, you can only open an rtsp://
URL address. However, RealPlayer recognizes an http link to a .ram file. To stream content over the air, select a streaming link saved in Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device. Receive RealPlayer settings You may receive RealPlayer settings in a special text message from the network operator or service provider. See Data and settings, p. 43. For more information, contact your network operator or service provider. Change the RealPlayer settings Select Options > Settings and from the following:
Videoto adjust the contrast of the video, and to have RealPlayer automatically repeat video clips after they finish playing. Connectionto select whether to use a proxy server, change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings. Proxy settings:
Use proxyTo use a proxy server, select Yes. s n o i t a c i l p p a a i d e M 35 R1114_en.book Page 36 Friday, September 16, 2005 9:36 AM Proxy serv. addressEnter the IP address of the proxy server. Proxy port numberEnter the port number of the proxy server. Glossary: Proxy servers are intermediate servers between media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips. Network settings:
Default access pointScroll to the access point you want to use to connect to the Internet, and press Online timeSet the time for RealPlayer to disconnect from the network when you pause a media clip playing through a network link. Select User defined, and press Enter the time, and select OK. Lowest UDP portEnter the lowest port number of the servers port range. The minimum value is 1024. Highest UDP portEnter the highest port number of the servers port range. The maximum value is 65535. Select Options > Advanced settings to edit the bandwidth values for different networks. Movie Director
, and select Imaging > Movie. To create muvees, press muvees are short, edited video clips that can contain video, images, music, and text. Quick muvee is created automatically by Movie director after you select the style for the muvee. Movie director uses the default music and text associated with the chosen style. In a Custom muvee you can select your own video and music clips, images and style, and add an opening and closing message. You can send muvees with MMS. Open Movie, and press to move between the views. You can also return to the main and or view by selecting Done. view contains a list of video clips that you can view from the The Play, Send, Rename, and Delete. Create a quick muvee 1 In the Movie director main view, select Quick muvee. 2 Select a style for the muvee from the style list. The created muvee is saved in the Movie director muvee list. The muvee is played automatically after saving. s n o i t a c i l p p a a i d e M 36 R1114_en.book Page 37 Friday, September 16, 2005 9:36 AM Create a custom muvee 1 In the Movie Director main view, select Custom muvee. 2 Select the clips you want to include in your muvee in Video, Image, Style, or Music. After you select video clips and images, to define the order in which the files are played in the muvee, select Options > Advanced options. To select the file you want to move, press which you want to place the marked file, and press
. Then scroll to the file below
. To cut the video clips, select Options > Select contents. See Select content, p. 14. In Message you can add an opening and closing text to a muvee. 3 Select Create muvee and from the following:
Multimedia messageto optimize the length of the muvee for MMS sending Auto-selectto include all the selected pictures and video clips in the muvee Same as musicto set the muvee duration to be the same as the chosen music clip User definedto define the length of the muvee 4 Select Options > Save. To preview the custom muvee before saving it, in the Preview muvee view, select Options > Play. To create a new custom muvee by using the same style settings, select Options > Recreate. Select content To edit the selected video clips, select Options > Advanced options > Options > Select contents. You can select which parts of the video clip you want to include or exclude in the muvee. In the slider, green is for included, red is for excluded, and grey is for neutral parts. To include a part of the video clip in the muvee, scroll to the part, and select Options > Include. To exclude a part, select Options > Exclude. To exclude a shot, select Options > Exclude shot. To let Movie director randomly include or exclude a part or parts of the video clip, scroll to the part, and select Options > Mark as neutral or Mark all as neutral. Settings Select Settings to edit the following options:
Memory in useSelect where to store your muvees. ResolutionSelect the resolution of your muvees. Default muvee nameSet a default name for the muvees. s n o i t a c i l p p a a i d e M 37 R1114_en.book Page 38 Friday, September 16, 2005 9:36 AM Messaging
, and select Messaging. In Messaging, you can Press create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data using Bluetooth connectivity or infrared, receive Web service messages, cell broadcast messages, and send service commands. To create a new message, select New message. Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. Messaging contains the following folders:
InboxReceived messages, except e-mail and cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox. My foldersOrganize your messages into folders. Tip! To avoid rewriting messages that you send often, use texts in the templates folder. MailboxConnect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See E-mail, p. 19. DraftsDraft messages that have not been sent are stored here. SentThe last 20 messages that have been sent, excluding messages sent using Bluetooth connectivity or infrared, are stored here. To change the number of messages to be saved, see Other settings, p. 21. OutboxMessages waiting to be sent are temporarily stored here. Example: Messages are placed in the outbox, for example, when your device is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox. ReportsYou can request the network to send you a delivery report of the text messages and multimedia messages you have sent (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible. Tip! When you have opened any of the default folders, to switch between the folders, press or
. To enter and send service requests (also known as USSD commands), such as activation commands for network g n i g a s s e M 38 R1114_en.book Page 39 Friday, September 16, 2005 9:36 AM services, to your service provider, select Options >
Service command in the main view of Messaging. Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options > Cell broadcast. In the main view, you can see the status of a topic, a topic number, name, and whether it has been flagged (
Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception.
) for follow-up. Write text ABC, abc, and Abc indicate the selected character mode. 123 indicates the number mode. Traditional text input is displayed when you are writing text using traditional text input. Press a number key (
) repeatedly until the If the next letter is located on the same key as the present one, wait until the cursor appears (or press to end the time-out period), and enter the letter. To insert a space, press
. To move the cursor to the next line, press three times. Predictive text input You can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words. is displayed when you write text using predictive text input. 1 To activate predictive text input, press
, and select Predictive text on. This activates predictive text input for all editors in the device. 2 To write the desired word, press the keys
. Press each key only once for one letter. For example, to write "Nokia"
when the English dictionary is selected, press for N, for o, for k, for a. for i, and desired character appears. There are more characters available for a number key than are printed on the key. The word suggestion changes after each keypress. 3 When you finish writing the word correctly, press to confirm it, or press to add a space. g n i g a s s e M 39 R1114_en.book Page 40 Friday, September 16, 2005 9:36 AM repeatedly to view
, and select Predictive text >
If the word is not correct, press the matching words the dictionary has found one by one, or press Matches. If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select Spell, enter the word using traditional text input, and select OK. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word. 4 Start writing the next word. Write compound words Write the first half of a compound word; to confirm it,
. Write the last part of the compound word. To press complete the compound word, press to add a space. Turn predictive text input off To turn predictive text input off for all editors in the device, press
, and select Predictive text > Off. Tip! To turn predictive text input on or off, quickly press twice. Tips on text input To insert a number in the letter mode, press and hold the desired number key. To switch between the letter and number mode, press and hold To switch between the different character modes, press
. To delete a character, press character, press and hold The most common punctuation marks are available under
. To delete more than one
. To open a list of special characters, press and hold
. Tip! To insert several special characters at the same time, press when you select each character. Write and send messages The appearance of a multimedia message may vary, depending on the receiving device. Copyright protections may prevent some images, music
(including ringing tones), and other content from being copied, modified, transferred or forwarded. Before you can create a multimedia message or write an e-mail, you must have the correct connection settings in place. See Receive MMS and e-mail settings, p. 13 and E-mail, p. 19. g n i g a s s e M 40 R1114_en.book Page 41 Friday, September 16, 2005 9:36 AM The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS. 1 Select New message and one of the following:
Text messageto send a text message Multimedia messageto send a multimedia message
(MMS) E-mailto send an e-mail If you have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. 2 In the To field, press to select recipients or groups from contacts, or enter the recipients phone number or e-mail address. To add a semicolon (;) that separates the recipients, press
. You can also copy and paste the number or address from the clipboard. 3 In the Subject field, enter the subject of a multimedia message or e-mail. To change the fields that are visible, select Options > Address fields. g n i g a s s e M 41 4 In the message field, write the message. To insert a template, select Options > Insert or Insert object >
Template. 5 To add a media object to a multimedia message, select Options > Insert object > Image, Sound clip, or Video clip. When sound is added, You cannot send video clips that are saved in the .mp4 format in a multimedia message. To change the format in which recorded videos are saved, see Video settings, p. 25. is shown. 6 To take a new picture or record sound or video for a multimedia message, select Insert new > Image, Sound clip, or Video clip. To insert a new slide to the message, select Slide. To see what the multimedia message looks like, select Options > Preview. 7 To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip, or Note. E-mail attachments are indicated by
. Tip! To send other file types as attachments, open the appropriate application, and select Send > Via e-mail, if available. 8 To send the message, select Options > Send, or press
. Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service R1114_en.book Page 42 Friday, September 16, 2005 9:36 AM provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message. In the navigation bar, you can see the message length indicator counting backwards. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages. E-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox with the Failed status. Tip! You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options > Create presentation. The option is shown only if MMS creation mode is set to Guided or Free. See Multimedia messages, p. 18. Receive MMS and e-mail settings You may receive the settings in a message from your network operator or service provider. See Data and settings, p. 14. For availability of and subscription to data services, contact your network operator or service provider. Follow the instructions given by your service provider. g n i g a s s e M Enter the MMS settings manually 1 Press
, and select Tools > Settings > Connection >
Access points, and define the settings for a multimedia messaging access point. See Connection settings, p. 90. 2 Press
, and select Messaging > Options >
Settings > Multimedia message > Access point in use and the access point you created as the preferred connection. See also Multimedia messages, p. 18. Before you can send, receive, retrieve, reply to, and forward e-mail, you must do the following:
Configure an Internet access point (IAP) correctly. See Connection settings, p. 90. Define your e-mail settings correctly. If you select Mailbox in the Messaging main view and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also E-mail, p. 19. You must have a separate e-mail account. Follow the instructions given by your remote mailbox and Internet service provider (ISP). Inboxreceive messages In the Inbox folder, message, indicates an unread text an unread multimedia message, data 42 R1114_en.book Page 43 Friday, September 16, 2005 9:36 AM
. and 1 new message data received through received through infrared, and Bluetooth connectivity. When you receive a message, are shown in the standby mode. to open the message, select Show. To open a message in Inbox, scroll to it, and press To reply to a received message, select Options > Reply To print a text or a multimedia message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print. Multimedia messages Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device, select Options > Retrieve. When you open a multimedia message (
an image and a message. included, or the video, select the indicator. if video is included. To play the sound or is shown if sound is
), you may see g n i g a s s e M 43
is To see the media objects that have been included in the multimedia message, select Options > Objects. If the message includes a multimedia presentation, displayed. To play the presentation, select the indicator. Data and settings Your device can receive many kinds of messages that contain data (
Configuration messageYou may receive settings from your network operator, service provider, or company information management department in a configuration message. To save the settings, select Options > Save all. Business cardTo save the information to Contacts, select Options > Save business card. Certificates or sound files attached to the business card are not saved. Ringing toneTo save the ringing tone, select Options >
Save. Operator logoTo have the logo shown in the standby mode instead of the network operators own identification, select Options > Save. Calendar entryTo save the invitation, select Options >
Save to Calendar. Web messageTo save the bookmark to the bookmarks list in Web, select Options > Add to bookmarks. If the R1114_en.book Page 44 Friday, September 16, 2005 9:36 AM message contains both access point settings and bookmarks, to save the data, select Options > Save all. E-mail notificationThe note tells you how many new e-mails you have in your remote mailbox. An extended notification may list more detailed information. Web service messages Web service messages (
) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider. Mailbox If you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also E-mail, p. 19. When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes. Open the mailbox When you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?). To connect to your mailbox and retrieve new e-mail headings or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection. See also Connection settings, p. 90. To view previously retrieved e-mail messages offline, select No. When you view e-mail messages offline, your device is not connected to the remote mailbox. Retrieve e-mail messages If you are offline, select Options > Connect to start a connection to the remote mailbox. Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. 1 When you have an open connection to a remote mailbox, select Options > Retrieve e-mail and one of the following:
Newto retrieve all new e-mail messages Selectedto retrieve only the e-mail messages that have been marked Allto retrieve all messages from the mailbox g n i g a s s e M 44 R1114_en.book Page 45 Friday, September 16, 2005 9:36 AM To stop retrieving messages, select Cancel. 2 After you retrieve the e-mail messages, you can continue viewing them online, or select Options >
Disconnect to close the connection and view the e-mail messages offline. E-mail status indicators:
The new e-mail (offline or online mode) has not been retrieved to your device. The new e-mail has been retrieved to your device. The e-mail message has been read, and it has not been retrieved to your device. The e-mail message has been read. The e-mail heading has been read and the 3 To open an e-mail message, press message content has been deleted from the device. If the e-mail message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox.
, and select Options >
To view e-mail attachments, open a message that has the attachment indicator Attachments. If the attachment has a dimmed indicator, it has not been retrieved to the device; select Options >
Retrieve. You can also receive meeting requests in the mailbox. See Meeting requests, p. 68, and Create calendar entries, p. 68. To print an e-mail message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print. Retrieve e-mail messages automatically To retrieve messages automatically, select Options > E-
mail settings > Automatic retrieval > Header retrieval >
Always on or Only in home net., and define when and how often the messages are retrieved. Retrieving e-mail messages automatically may increase your call costs due to the data traffic. Delete e-mail messages To delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone only. The device mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your device. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, and then make a connection from your device to the remote mailbox again to update the status. g n i g a s s e M 45 R1114_en.book Page 46 Friday, September 16, 2005 9:36 AM To delete an e-mail from the device and the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone and server. If you are offline, the e-mail is deleted first from your device. During the next connection to the remote mailbox, it is automatically deleted from the remote mailbox. If you are using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox. To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted
), and select Options >
during the next connection (
Undelete. Disconnect from the mailbox When you are online, to end the data connection to the remote mailbox, select Options > Disconnect. View messages on a SIM card Before you can view SIM messages, you must copy them to a folder in your device. 1 In the Messaging main view, select Options > SIM 2 Select Options > Mark/Unmark > Mark or Mark all to messages. mark messages. 3 Select Options > Copy. A list of folders opens. 4 To start copying, select a folder and OK. To view the messages, open the folder. Messaging settings Fill in all fields marked with Must be defined or with a red asterisk. Follow the instructions given by your service provider. You may also obtain settings from your service provider in a configuration message. Some or all message centers or access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them. Text messages Press Text message and from the following:
Message centersView a list of all text message centers that have been defined. Character encoding To use character conversion to another encoding system when available, select Reduced support. Msg. center in useSelect which message center is used to deliver text messages.
, and select Messaging > Options > Settings >
g n i g a s s e M 46 R1114_en.book Page 47 Friday, September 16, 2005 9:36 AM Receive reportSelect whether the network sends delivery reports on your messages (network service). Message validitySelect how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center. Message sent asChange this option only if you are sure that your message center is able to convert text messages into these other formats. Contact your network operator. Preferred connectionSelect the connection used for sending text messages: GSM network or packet data, if supported by the network. See Connection settings, p. 90. Reply via same ctr.Select whether you want the reply message to be sent using the same text message center number (network service). Multimedia messages Press Multimedia message and from the following:
Image sizeDefine the size of the image in a multimedia message: Original (shown only when the MMS creation mode is set to Guided or Free), Small, or Large.
, and select Messaging > Options > Settings >
MMS creation mode If you select Guided, the device informs you if you try to send a message that may not be supported by the recipient. Select Restricted; the device prevents you from sending messages that may not be supported. Access point in useSelect which access point is used as the preferred connection for the multimedia message center. Multimedia retrievalSelect how you want to receive multimedia messages. To receive multimedia messages automatically in your home network, select Aut. in home network. Outside your home network, you receive a notification that there is multimedia message that you can retrieve in the multimedia message center. When you are outside your home network, sending and receiving multimedia messages may cost you more. If you select Multimedia retrieval > Always automatic, your device automatically makes an active packet data connection to retrieve the message both in and outside your home network. Allow anon. messagesSelect whether you want to reject messages from an anonymous sender. Receive adsDefine whether you want to receive multimedia message advertisements. g n i g a s s e M 47 R1114_en.book Page 48 Friday, September 16, 2005 9:36 AM Receive reportSelect whether you want the status of the sent message to be shown in the log (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible. Deny report sendingSelect whether you want to deny your device sending delivery reports of received multimedia messages. Message validitySelect how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center. E-mail Press E-mail and from the following:
MailboxesSelect a mailbox to change the following settings: Connection settings, User settings, Retrieval settings, and Automatic retrieval. Mailbox in use Select which mailbox you want to use for sending e-mail. To create a new mailbox, select Options > New mailbox in the mailbox main view.
, and select Messaging > Options > Settings >
Connection settings To edit the settings for the e-mail you receive, select Incoming e-mail and from the following:
User nameEnter your user name, given to you by your service provider. PasswordEnter your password. If you leave this field blank, you are prompted for the password when you try to connect to your remote mailbox. Incoming mail serverEnter the IP address or host name of the mail server that receives your e-mail. Access point in useSelect an Internet access point (IAP). See Connection settings, p. 90. Mailbox nameEnter a name for the mailbox. Mailbox typeDefines the e-mail protocol that your remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you use the POP3 protocol, e-mail messages are not updated automatically when you are online. To see the latest e-mail messages, you must disconnect and make a new connection to your mailbox. Security (ports)Select the security option used to secure the connection to the remote mailbox. PortDefine a port for the connection. g n i g a s s e M 48 R1114_en.book Page 49 Friday, September 16, 2005 9:36 AM APOP secure login (for POP3 only)Use with the POP3 protocol to encrypt the sending of passwords to the remote e-mail server while connecting to the mailbox. To edit the settings for the e-mail you send, select Outgoing e-mail and from the following:
My e-mail addressEnter the e-mail address given to you by your service provider. Replies to your messages are sent to this address. Outgoing mail serverEnter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator. Contact your service provider for more information. Access point in useSelect an Internet access point (IAP). See Connection settings, p. 90. The settings for User name, Password, Security (ports), and Port are similar to the ones in Incoming e-mail. User settings My nameEnter your own name. Your name replaces your e-mail address in the recipients device when the recipients device supports this function. Send messageDefine how e-mail is sent from your device. Select Immediately for the device to connect to the mailbox when you select Send message. If you select During next conn., e-mail is sent when the connection to the remote mailbox is available. g n i g a s s e M 49 Send copy to selfSelect whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address. Include signatureSelect whether you want to attach a signature to your e-mail messages. New e-mail alertsSelect whether you want to receive the new e-mail indications, a tone and a note, when new mail is received to the mailbox. Default encodingSelect another encoding according to language. Retrieval settings E-mail to retrieveDefine which parts of the e-mail are retrieved: Headers only, Partially (kB), Messages (for IMAP4 only), or Msgs. & attachs.. Retrieval amountDefine how many new e-mail messages are retrieved to the mailbox. IMAP4 folder path (for IMAP4 only)Define the folder path for folders to be subscribed. Folder subscriptions (for IMAP4 only)Subscribe to other folders in the remote mailbox and retrieve content from those folders. R1114_en.book Page 50 Friday, September 16, 2005 9:36 AM Automatic retrieval E-mail notificationsSelect whether you want to receive notifications when new e-mail is received in your remote mailbox. E-mail notifications and automatic header retrieval cannot be active at the same time. Header retrievalSelect whether you want the device to retrieve new e-mail automatically. You can define when, and how often, the messages are retrieved. Retrieving e-mail messages automatically may increase your call costs due to the data traffic. Web service messages Press Service message. Select whether you want to receive service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically. Cell broadcast Check the available topics and related topic numbers with your service provider. Press Options > Settings > Cell broadcast and from the following:
, and select Messaging > Options > Settings >
, and select Messaging >
, and select Messaging > Options > Settings >
ReceptionSelect whether you want to receive cell broadcast messages. LanguageSelect the languages in which you want to receive messages: All, Selected, or Other. Topic detectionSelect whether the device automatically searches for new topic numbers, and saves the new numbers without a name to the topic list. Other settings Press Other and from the following:
Save sent messagesSelect whether you want to save a copy of the text messages, multimedia messages, or e-
mail that you send to the Sent folder. No. of saved msgs.Define how many sent messages are saved to the Sent folder at a time. The default limit is 20 messages. When the limit is reached, the oldest message is deleted. Memory in useIf a memory card is inserted in the device, select the memory where you want to save your messages: Phone memory or Memory card. g n i g a s s e M 50 R1114_en.book Page 51 Friday, September 16, 2005 9:36 AM Make calls Voice calls keys. or Tip! To increase or decrease the volume during a call, press you cannot adjust the volume with the
. If you have set the volume to Mute, or or To adjust the volume, select Unmute, and then press
. 1 In the standby mode, enter the phone number, including the area code. To remove a number, press For international calls, press character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number. twice for the +
. always ends a call, even if another to call the number. to end the call (or to cancel the call attempt). 2 Press 3 Press Pressing application is active. To end a call if the cover is open, close the cover. To make a call from Contacts, press Contacts. Scroll to the desired name, or enter the first letters of the name to the search field. Matching contacts
. Select the call type Voice call. are listed. To call, press
, and select You must copy the contacts from your SIM to Contacts before you can make a call this way. See Copy contacts, p. 62. To call your voice mailbox (network service), press and hold 96. in the standby mode. See also Call diverting, p. Tip! To change the phone number of your voice
, and select Tools > Voice mail >
mailbox, press Options > Change number. Enter the number
(obtained from your service provider), and select OK. To call a recently dialled number in the standby mode, press to call the number. Make a conference call 1 Make a call to the first participant. 2 To make a call to another participant, select Options >
. Scroll to the number you want, and press New call. The first call is automatically put on hold. 3 When the new call is answered, to join the first participant in the conference call, select Options >
Conference. To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. s l l a c e k a M 51 R1114_en.book Page 52 Friday, September 16, 2005 9:36 AM s l l a c e k a M Your device supports conference calls between a maximum of six participants, including yourself. To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. Once you have finished the private conversation, select Options > Add to conference to return to the conference call. To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select Drop.
, and select Tools >
4 To end the active conference call, press Speed dial a phone number To activate speed dialing, press Settings > Call > Speed dialing > On. To assign a phone number to one of the speed dialing keys
, and select Tools > Speed dial. Scroll
to the key to which you want to assign the phone number, and select Options > Assign. is reserved for the voice mailbox. To call in the standby mode, press the speed dial key and
), press
. 52 Voice dialing Your device supports enhanced voice commands. Enhanced voice commands are not dependent on the speakers voice, so the user does not record voice tags in advance. Instead, the device creates a voice tag for the entries in contacts, and compares the spoken voice tag to it. The voice recognition in the device adapts to the main users voice to recognize the voice commands better. The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesized voice tag, open a contact card, and select Options > Play voice tag. Make a call with a voice tag Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. When you use voice dialing, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag. 1 To start voice dialing, press and hold the voice key. If you are using a compatible headset with the headset key, press and hold the headset key to start voice dialing. R1114_en.book Page 53 Friday, September 16, 2005 9:36 AM 2 A short tone is played, and Speak now is displayed. Say clearly the name or nickname that is saved on the contact card. 3 The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a timeout of 1.5 seconds, the device dials the number. If the recognized contact was not correct, select Next to view a list of other matches, or Quit to cancel voice dialing. If several numbers are saved under the name, the device selects the default number, if it has been set. Otherwise the device selects the first available number of the following: Mobile, Mobile (home), Mobile (business), Telephone, Tel. (home), and Tel. (business). Video calls When you make a video call, you can see a real-time, two-way video between you and the recipient of the call. The live video image, or video image captured by the camera in your device is shown to the video call recipient. To be able to make a video call, you must have a USIM card and be in the coverage of a UMTS network. For availability of and subscription to video call services, contact your network operator or service provider. A video call can only be made between two parties. The video call can be made to a compatible mobile phone or an ISDN client. Video calls cannot be made while there is another voice, video, or data call active. Icons:
You are not receiving video (the recipient is not sending video or the network is not transmitting it). You have denied video sending from your device. To s l l a c e k a M send a still image instead, see Call settings, p. 89. 1 To start a video call, open the cover, enter the phone number in the standby mode, or select Contacts, and select a contact. 2 Select Options > Call >
Video call. 3 Activate the Imaging mode after the call recipient has answered the call. Starting a video call may take a while. Waiting for image is shown. If the call is not successful (for example, video calls are not supported by the network, or the receiving device is not compatible) you are asked if you want to try a normal call or send a message instead. The video call is active when you see two video images, and hear the sound through the loudspeaker. The call recipient may deny video sending (
), in which case you 53 R1114_en.book Page 54 Friday, September 16, 2005 9:36 AM hear the sound and may see a still image or a grey background graphic. Tip! To increase or decrease the volume during a call, scroll left or right. To change between showing video or hearing only sound, select Enable/Disable > Sending video, Sending audio or Sending audio & video. To send live video image of yourself, select Use front camera to switch on the front camera. To show the other party the view visible from the back camera, select Use back camera. Tip! Open or close the cover to switch between the front and back cameras. IS THIS TRUE?
To zoom your own image, select Zoom in or Zoom out. The zoom indicator is shown on the top of the display. To switch the places of the sent video images on the display, select Change image order. Note: Even if you have denied video sending during a video call, the call will still be charged as a video call. Check the pricing with your network operator or service provider. To end the video call, press
. Video sharing (network service) Use Video sharing to send live video or a video clip from your mobile device to another compatible mobile device during a voice call. Simply invite a recipient to view the live video, or a video clip you want to share. Sharing begins automatically when the recipient accepts the invitation, and you activate the correct mode. See Share video, p. 13. Video sharing requirements Because Video sharing requires a 3G Universal Mobile Telecommunications System (UMTS) connection, your ability to use Video sharing depends on 3G network availability. Contact your service provider for questions about network availability and fees associated with using this application. To use Video sharing you must:
Ensure that Video sharing is installed on your Nokia NXX. Ensure that your device is set up for person-to-person connections. See Settings, p.13. Ensure you have an active UMTS connection and are within UMTS network coverage. See Settings, p. 13. If you start the sharing session while you are within UMTS network coverage and a handover to GSM occurs, the sharing session is discontinued, but your voice call continues. s l l a c e k a M 54 R1114_en.book Page 55 Friday, September 16, 2005 9:36 AM Ensure that both the sender and recipient are registered to the UTMS network. If you invite someone to a sharing session and that person has his phone turned off, or the person is not within UMTS network coverage, they do not know that you are sending an invitation. However, you receive an error message that the recipient cannot accept the invitation. Settings Person-to-person connection settings A person-to-person connection is also known as a Session Initiation Protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use Video sharing. Setting up a SIP profile allows you to establish a live person-to-person connection to another compatible phone. The SIP profile must also be established to receive a sharing session. Ask your network operator or service provider for the SIP profile settings, and save them in your device. Your network operator or service provider may send you the settings over the air. If you know a recipients SIP address, you can enter it on your contact card for that person. Open Contacts from your device main menu, and open the contact card (or start a new card for that person). Select Options >Add detail >
Web address. Enter the SIP address in a format sip:username@domainname (you can use an IP address instead of a domain name). UTMS connection settings To set up your UMTS connection, do the following:
Contact your service provider to establish an agreement for you to use the UMTS network. Ensure that your device UMTS access point connection settings are configured properly. For help, see Connection settings, p. 90. s l l a c e k a M Share video To receive a sharing session, the recipient must install Video sharing and configure the required settings on their mobile device. You and the recipient must both be registered to the service before you can start sharing. To receive share invitations, you must be registered to the service, have an active UMTS connection, and be within the UMTS network coverage. Live video 1 When a voice call is active, select Options > Share video > Live. 2 The phone sends the invitation to the SIP address you have added to the contact card of the recipient. 55 R1114_en.book Page 56 Friday, September 16, 2005 9:36 AM s l l a c e k a M If the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation. 3 Sharing begins automatically when the recipient accepts the invitation. The loudspeaker is active. You can also use a headset to continue your voice call while you share live video. 4 Select Pause to pause the sharing session. Select Continue to resume sharing. 5 To end the sharing session, select Stop. To end the voice call, press the End key. Video clip 1 When a voice call is active, select Options > Share video > Clip. A list of video clips opens. 2 Select a video clip you want to share. A preview view opens. To preview the clip, select Options > Play. 3 Select Options > Invite. You may need to convert the video clip into a suitable format to be able to share it. Clip must be converted for sharing. Continue? appears. Select OK. The phone sends the invitation to the SIP address you have added to the contact card of the recipient. In case the recipient has several SIP addresses in the contact card, select the SIP address to which you want 56 to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation. 4 Sharing begins automatically when the recipient accepts the invitation HOW DOES THIS WORK NOW? . 5 Select Pause to pause the sharing session. Select Options > Continue to resume sharing. 6 To end the sharing session, select Stop. To end the voice call, press the End key. Accept an invitation When someone sends you a share invitation, an invitation message is displayed showing the senders name or SIP address. If your device is not set to Silent, it rings when you receive an invitation. If someone sends you a share invitation and you are not within UMTS network coverage, you will not know that you received an invitation. When you receive an invitation, you can select:
Accept to begin the sharing session. If the sender wants to share live video, activate the Imaging mode. Reject to decline the invitation. The sender receives a message that you rejected the invitation. You can also press the End key to decline the sharing session and disconnect the voice call. R1114_en.book Page 57 Friday, September 16, 2005 9:36 AM To end the sharing session, select Stop. If you share a video clip, select Exit. Sharing ended is displayed. Answer or reject a call To answer the call if the cover is open, press cover is closed, open the cover, and the call will be answered automatically. To mute the ringing tone when a call comes in, select Silence. If the cover is closed, press the cover key to select Silence. If the or close the cover to reject it. If the cover is Tip! If a compatible headset is connected to the device, to answer and end a call, press the headset key. If the cover is open, and you do not want to answer a call, press closed, press the cover key once to silence the ringing, and again to reject the call. The caller hears a line busy tone. If you have activated the Call divert settings > If busy function to divert calls, rejecting an incoming call also diverts the call. See Call diverting, p. 96. When you reject an incoming call, you can also send a text message to the caller informing why you cannot answer the call. Select Options > Send text message. You can edit the text before sending it. To set up this option and write a standard text message, see Call settings, p. 89. If you answer a voice call during a video call, the video call is dropped. Call waiting is not available during a video call. Answer or reject a video call When a video call arrives, you can see
. 1 Press to answer the video call. Allow video image to be sent to caller? is shown. If you select Yes, the image being captured by the camera in your phone is shown to the caller. If you select No, or do nothing, video sending is not activated, and you hear a sound. A grey screen is shown in place of the video. To replace this grey screen with a still image, see Call settings, Image in video call, p. 89. 2 To end the video call, press
. Note: Even if you have denied video sending during a video call, the call will still be charged as a video call. Check the pricing with your network operator or service provider. Call waiting (network service) You can answer a call while you have another call in progress if you have activated Call waiting in Tools >
Settings > Call > Call waiting. s l l a c e k a M 57 R1114_en.book Page 58 Friday, September 16, 2005 9:36 AM Tip! To change the device tones for different environments and events, for example, when you want your device to be silent, see Profilesset tones, p. 85. The first call is put To answer the waiting call, press on hold. To switch between the two calls, select Swap. To connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls, select Options >
Transfer . To end the active call, press
. To end both calls, select Options > End all calls. Options during a voice call Many of the options that you can use during a voice call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer, Reject, Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible headset with Bluetooth connectivity is attached), End active call or End all calls, New call, Conference, and Transfer. Select from the following:
ReplaceTo end an active call and replace it by answering the waiting call. Send MMS (in UMTS networks only)To send an image or a video in a multimedia message to the other participant of the call. You can edit the message and change the s l l a c e k a M 58 to send the file to a recipient before sending. Press compatible device (network service). Send DTMFTo send DTMF tone strings, for example, a password. Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press tone. repeatedly. Select OK to send the Tip! You can add DTMF tones to the Phone number or DTMF fields in a contact card. Tip! If you select Activate loudsp., you can close the cover and continue the call. Tip! To switch the microphone of or on when the cover is closed, press the cover key to select to Mute or Unmute. Options during a video call Select Options during a video call for the following options: Enable or Disable WHAT ARE THE AUDIOVIDEO OPTIONS? GROMIT SAYS :(audio in the Fold open mode;
video, audio, or both in the Imaging mode), Activate handset (if a headset with Bluetooth connectivity is attached), Activate loudsp., or Activate handsfree HOW DOES THIS WORK NOW? (Fold open mode only, and if a headset with Bluetooth connectivity is attached), End active call, Change image order, Zoom in/Zoom out
(Imaging mode only), and Help. R1114_en.book Page 59 Friday, September 16, 2005 9:36 AM Log Recent calls To monitor the phone numbers of missed, received, and
, and select My own > Log > Recent dialled calls, press calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area. Tip! When you see a note in the standby mode about missed calls, select Show to access the list of missed calls. To call back, scroll to a name or number, and press
. To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press Call duration To monitor the approximate duration of your incoming and
, and select My own > Log > Call outgoing calls, press duration. To set the display of the call duration while a call is active, select Connect. > Log > Options > Settings > Show call duration. Select Yes or No. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth. To clear call duration timers, select Options > Clear timers. For this you need the lock code, see Security, Phone and SIM, p. 93. Packet data To check the amount of data sent and received during
, and select My own >
packet data connections, press Log > Packet data. For example, you may be charged for your packet data connections by the amount of data sent and received. Monitor all communication events Icons in Log:
Incoming Outgoing Missed communication events s l l a c e k a M 59 R1114_en.book Page 60 Friday, September 16, 2005 9:36 AM
, select My To monitor all voice and video calls, text messages, or data connections registered by the device, press own > Log, and press the scroll key to the right to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information. Tip! To see the duration of a voice call on the main display during an active call, select Options > Settings
> Show call duration > Yes. Tip! To view a list of sent messages, press select Messaging > Sent.
, and Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging centre, or Web pages are shown as packet data connections. To filter the log, select Options > Filter and a filter. To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options>
Clear log. Select Yes to confirm. To remove a single event from the log, press To set the Log duration, select Options > Settings > Log duration. The log events remain in the phone memory for a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted. To view the details of a communication event, in the general log view scroll to an event, and press the scroll key. Tip! In the details view you can copy a phone number to the clipboard, and paste it to a text message, for example. Select Options > Copy Number. Packet data counter and connection timer: To view how much data, measured in kilobytes, is transferred and how long a certain packet data connection lasts, scroll to an incoming or outgoing event indicated by Pack., and select Options > View details. s l l a c e k a M 60 R1114_en.book Page 61 Friday, September 16, 2005 9:36 AM Contacts (Phonebook)
, and select Contacts. In Contacts you can add a Press personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information
(business cards) to contacts. See Data and settings, p. 43. Contact information can only be sent to or received from compatible devices. Save names and numbers 1 Select Options > New contact. 2 Fill in the fields that you want, and select Done. To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit. Tip! To print contact cards on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print. To delete a contact card in Contacts, select a card, and press press delete. To delete several contact cards at the same time, and to to mark the contacts, and press Tip! To add and edit contact cards, use Nokia Contacts Editor available in Nokia PC Suite. To attach a small thumbnail image to a contact card, open the contact card, and select Options > Edit > Options >
Add thumbnail. The thumbnail image is shown when the contact calls. Tip! 1-touch dialing is a quick way to call frequently used numbers. You can assign 1-touch dialing keys to eight phone numbers. See Speed dial a phone number, p. 52. Tip! To send contact information, select the card you want to send. Select Options > Send > Via text message, Via multimedia, Via Bluetooth, or Via infrared. See Messaging, p. 38 and Send data using Bluetooth connectivity, p. 78. To add a contact to a group, select Options > Add to group (shown only if you have created a group). See Create contact groups, p. 11. To view the amount of contacts, groups, and the available memory in Contacts, select Options > Memory details.
) k o o b e n o h P
s t c a t n o C 61 R1114_en.book Page 62 Friday, September 16, 2005 9:36 AM Default numbers and addresses You can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing. 1 In the address book, select a contact, and press 2 Select Options > Defaults. 3 Select a default to which you want to add a number or
. an address, and select Assign. 4 Select a number or an address you want to set as a default. The default number or address is underlined in the contact card. Copy contacts To copy names and numbers from a SIM card to your
, and select Contacts > Options > SIM device, press contacts > SIM directory. Select the names you want to copy and Options > Copy to Contacts. To copy contacts to your SIM card, press Contacts. Select the names you want to copy and Options > Copy to SIM direct., or Options > Copy > To SIM directory. Only the contact card fields supported by your SIM card are copied.
, and select Tip! You can synchronize your contacts to a compatible PC with Nokia PC Suite.
, and select Contacts > Options > SIM SIM directory and other SIM services For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Press contacts > SIM directory to see the names and numbers stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls. To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dialing contacts. This setting is only shown if supported by your SIM card. To restrict calls from your device to selected phone numbers, select Options > Activ. fixed dialing. To add new numbers to the fixed dialing list, select Options >
New SIM contact. You need the PIN2 code for these functions. When you use Fixed dialing, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message center number and the recipients phone number must be included on the fixed dialing list.
) k o o b e n o h P
s t c a t n o C 62 R1114_en.book Page 63 Friday, September 16, 2005 9:36 AM When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device. Add ringing tones for contacts When a contact or group member calls you, the device plays the chosen ringing tone (if the callers telephone number is sent with the call and your device recognizes it). 1 Press to open a contact card or go to the groups list, opens. 3 Select the ringing tone you want to use for the individual contact or the selected group.
???You can also use a video clip as a ringing tone.???
To remove the ringing tone, select Default tone from the list of ringing tones. Create contact groups 1 In Contacts, press 2 Select Options > New group. 3 Write a name for the group or use the default name to open the groups list. Group %N, and select OK. 4 Open the group, and select Options > Add members. and select a contact group. 2 Select Options > Ringing tone. A list of ringing tones from group. 5 Scroll to a contact, and press to mark it. To add multiple members at a time, repeat this action on all the contacts you want to add. 6 Select OK to add the contacts to the group. To rename a group, select Options > Rename, enter the new name, and select OK. Remove members from a group 1 In the groups list, open the group you want to modify. 2 Scroll to the contact, and select Options > Remove 3 Select Yes to remove the contact from the group. Tip! To check to which groups a contact belongs, scroll to the contact, and select Options > Belongs to groups.
) k o o b e n o h P
s t c a t n o C 63 R1114_en.book Page 64 Friday, September 16, 2005 9:36 AM Web Various service providers maintain pages specifically designed for mobile devices. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML). Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services. Press
, and select Web. Shortcut: To start a connection, press and hold in the standby mode. Web access point To access pages, you need Web service settings for the page that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the Web page. See Data and settings, p. 43. For more information, contact your network operator or service provider. Tip! Settings may be available on the Web site of a network operator or service provider. Enter settings manually 1 Press
, select Tools > Settings > Connection >
Access points, and define the settings for an access point. Follow the instructions given to you by your service provider. See Connection settings, p. 90.
, and select Web > Options > Bookmark manager > Add bookmark. Write a name for the bookmark and the address of the page defined for the current access point. 2 Press 3 To set the created access point as the default access point, select Options > Settings > Access point. Bookmarks view The bookmarks view opens when you open Web. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. indicates the starting page defined for the default access point. b e W 64 R1114_en.book Page 65 Friday, September 16, 2005 9:36 AM is displayed during a Connection security If the security indicator connection, the data transmission between the device and the Internet gateway or server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server
(or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server. Select Options > Details > Security to view details about the connection, encryption status, and information about server and user authentication. Security certificates may be required for some services, such as banking services. For more information, contact your service provider. See also Certif. management, p. 94. Browse Important: Use only services that you trust and that offer adequate security and protection against harmful software. To download a page, select a bookmark, or enter the address in the field (
). On a browser page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them. To open links and make selections, press
. Shortcut: Use to jump to the end of a page and to the beginning of a page. To go to the previous page while browsing, select Back. If Back is not available, select Options > Navigation options > History to view a chronological list of the pages you visited during a browsing session. To retrieve the latest content from the server, select Options > Navigation options > Reload. To save a bookmark, select Options > Save as bookmark. Tip! To access the bookmarks view while browsing, press and hold Options > Back to page. To return to the browser view, select To save a page while browsing, select Options > Advanced options > Save page. You can save pages to the device memory or memory card (if inserted), and browse them when offline. To access the pages later, press in the bookmarks view to open the Saved pages view. To enter a new URL address, select Options > Navigation options > Go to web address. b e W 65 R1114_en.book Page 66 Friday, September 16, 2005 9:36 AM
. To open a sublist of commands or actions for the currently open page, select Options > Service options. You can download files that cannot be shown on the browser page, such as ringing tones, images, operator logos, themes, and video clips. To download an item, scroll to the link, and press When you start a download, a list of ongoing, paused, and completed downloads from the current browsing session is displayed. You can also view the list by selecting Options >
Tools > Downloads. In the list, scroll to an item, and select Options to pause, resume, or cancel ongoing downloads, or open, save, or delete completed downloads. Copyright protections may prevent some images, music
(including ringing tones), and other content from being copied, modified, transferred or forwarded. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. Download and purchase items You can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your device, for example, a downloaded photo can be saved in Gallery. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. 1 To download the item, scroll to the link, and press
. 2 Select the appropriate option to purchase the item, for b e W example, Buy. 3 Carefully read all the information provided. To continue the download, select Accept. To cancel the download, select Cancel. End a connection To end the connection and view the browser page offline, select Options > Advanced options > Disconnect, or to end the connection and close the browser, select Options > Exit. Empty the cache The information or services you have accessed are stored in the cache memory of the device. A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have 66 R1114_en.book Page 67 Friday, September 16, 2005 9:36 AM b e W accessed are stored in the cache. To empty the cache, select Options > Advanced options > Clear cache. Web settings Select Options > Settings and from the following:
Access pointChange the default access point. See Connection settings, p. 90. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them. Show images and objectsSelect whether you want to load images while browsing. If you select No, to load images later during browsing, select Options > Show images. Font sizeSelect the text size. Default encodingIf text characters are not shown correctly, you can select another encoding according to language. Automatic bookmarksEnable or disable automatic bookmark collecting. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder. Screen sizeSelect what is shown when you are browsing: Select. keys only or Full screen. 67 HomepageDefine the home page. Search pageDefine a Web page that is downloaded when you select Navigation options > Open search page in the bookmarks view, or when browsing. VolumeIf you want the browser to play sounds embedded on Web pages, select a volume level. RenderingIf you want the page layout shown as accurately as possible when in Small screen mode, select By quality. If you do not want external cascading style sheets to be downloaded, select By speed. CookiesEnable or disable the receiving and sending of cookies. Java/ECMA scriptEnable or disable the use of scripts. Security warningsHide or show security notifications. Confirm touch tonesSelect whether you want to confirm before the device sends touch tones during a voice call. See also Options during a voice call, p. 58. R1114_en.book Page 68 Friday, September 16, 2005 9:36 AM Calendar Use Calendar to remind you of meetings, anniversaries, and to keep track of your tasks and other notes. Create calendar entries Shortcut: In the day, week, or month calendar view, press any key (
). An appointment entry opens, and the characters you enter are added to the Subject field. In the to-do view, a to-do note entry opens. 1 Press
, and select Calendar > Options >
New entry and one of the following:
Appointmentto remind you of an appointment that has a specific date and time Meeting requestto send a meeting request by e-mail (a mailbox must be defined in the device) Memoto write a general entry for a day Anniversaryto remind you of birthdays or special dates (entries are repeated every year) To-doto remind you of a task that needs doing by a specific date 2 Fill in the fields. To set an alarm, select Alarm > On, and enter the Alarm time and Alarm date. To add a description for an appointment or a meeting, select Options > Add description. 3 To save the entry, select Done. When the calendar alarms for a note, select Silence to turn off the calendar alarm tone. The reminder text stays on the screen. To end the calendar alarm, select Stop. To set the alarm to snooze, select Snooze. Tip! You can synchronize your calendar with a compatible PC using Nokia PC Suite. When creating a calendar entry, set the desired Synchronization option. Meeting requests If you receive a meeting request to the mailbox in your device, the request is saved to the calendar when you open the e-mail. r a d n e l a C 68 Manage your calendar entries Deleting past entries in Calendar saves space in your device memory. To delete more than one event at a time, go to the month view, and select Options > Delete entry > Before date or All entries. To mark a task as completed, scroll to it in the to-do view, and select Options > Mark as done. Calendar settings To modify the Calendar alarm tone, Default view, Week starts on, and Week view title, and Default mailbox , select Options > Settings. R1114_en.book Page 69 Friday, September 16, 2005 9:36 AM r a d n e l a C You can view received meeting requests in the mailbox or in the calendar. To respond to a meeting request via e-mail, select Options > Respond Calendar views Tip! Select Options > Settings to change the starting day of the week or the view that is shown when you open the calendar. In the month view, dates that have calendar entries are marked with a small triangle in the right bottom corner. In the week view, memos and anniversaries are placed before 8 a.m. To switch between the month view, week view, day view, and to-do view, press To go to a certain date, select Options > Go to date. To jump to today, press To send a calendar note to a compatible device, select Options > Send. To print calendar entries on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print. 69 R1114_en.book Page 70 Friday, September 16, 2005 9:36 AM My own Visual Radio You can use the Visual RadioTM application as a traditional FM radio with automatic tuning and saved stations, and, if you tune to stations that offer Visual Radio service, you can view visual information on the display related to the radio program. The Visual Radio service uses packet data
(network service). You can listen to the FM radio while using other applications. To use the Visual Radio service, the following conditions are required:
The device must be switched on. The device must have a valid SIM card inserted. The station you listen to and the network operator you use must support this service. An Internet access point must be defined to access the operators visual radio server. The station must have the correct Visual Radio service ID defined and Visual Radio service enabled. See Saved stations, p. 11. If you do not have access to the Visual Radio service, the operators and radio stations in your area may not support Visual Radio. The Visual Radio service may not be available in all areas and countries. The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. You can listen to the radio with the built-in loudspeaker or a compatible headset. When using the loudspeaker, keep the headset plugged in the device. The lead of the headset functions as the antenna of the radio, so let it hang freely. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. You can normally make a call or answer an incoming call while listening to the radio. The radio is turned off when there is an active call. When the call is finished, you may need to turn the radio back on manually. The radio selects the used frequency band based on the country information received from the network. If this information is not available, you may be asked to select n w o y M 70 R1114_en.book Page 71 Friday, September 16, 2005 9:36 AM the region you are located in, or you can select the region in the Visual radio settings. Visual Radio can be used for listening when the device cover is closed. Channel information may be displayed on the cover display To mute or unmute the radio, press the cover key. Listen to the radio Note that the quality of the radio broadcast depends on the coverage of the radio station in that particular area. Connect a compatible headset to the device. The lead of the headset functions as the radio antenna, so let it hang freely. Press To start a station search, select
. Searching stops when a station is found. To change the frequency manually, select Options > Manual tuning.
, and select Radio. or If you have previously saved radio stations, select or to go to the next or previous saved station, or select the memory location of a station by pressing the corresponding number key. ED: REQUEST NEW GRAPHIC To adjust the volume, press
. To listen to the or Add graphic and icons in text to show the on-
screen buttons radio using the loudspeaker, select Options > Activate loudsp.. To view available stations based on location, select Options > Station directory (network service). To save the current tuned station to your station list, select Options > Save station. To open the list of your saved stations, select Options > Stations. See Saved stations, p. 11. To return to the standby mode and leave the FM radio playing in the background, select Options > Play in background. View visual content To check availability and costs, and to subscribe to the service, contact your network operator or service provider. n w o y M 71 R1114_en.book Page 72 Friday, September 16, 2005 9:36 AM To view available visual content for a tuned station, select or Options > Station > Start visual service. If the visual service ID has not been saved for the station, enter it, or select Retrieve to search for it in the station directory
(network service)... When the connection to the visual service is established, the display shows the current visual content designed by the content provider. To adjust display settings for the visual content view, select Options > Display settings > Lighting or Screen saver timeout. Saved stations You can save up to 20 radio stations in Visual Radio. To open your station list, select Options > Stations. To listen to a saved station, select Options > Station >
Listen. To view available visual content for a station with Visual Radio service, select Options > Station > Start visual service. To change station details, select Options > Station > Edit. Settings Select Options > Settings and from the following:
Start-up toneSelect if a tone is played when the application is started. Auto-start serviceSelect Yes to have the Visual Radio service start automatically when you select a saved station that offers visual service. Access pointSelect the access point used for the data connection. You do not need an access point to use the application as an ordinary FM radio. Current regionSelect the region you are currently located in. This setting is displayed only if there was no network coverage when the application was started. n w o y M Go toadd shortcuts
, and select My own > Go to. Default shortcuts opens Inbox, opens Calendar, Press are the following:
and opens Notes. IMinstant messaging
, and select My own > IM. Press Instant messaging (network service) allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can 72 R1114_en.book Page 73 Friday, September 16, 2005 9:36 AM log in to after you register to an IM service. Service providers may differ in their support of features. Select Conversations to start or continue a conversation with an IM user; IM contacts to create, edit, or view the online status of your IM contacts; IM groups to start or continue a group conversation with multiple IM users; or Recorded chats to view a previous instant messaging session that you saved. Check the availability of services, pricing, instructions, and fees with your network operator or service provider. Receive IM settings You must save the settings to access the service that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the IM service. See Data and settings, p. 43. You can also enter the settings manually. See Chat server settings, p. 14. Connect to an IM server 1 To connect to the IM server in use, open IM, and select Options > Login. To change the IM server in use and save new IM servers, see Chat server settings, p. 14. to log 2 Enter your user ID and password, and press in. You obtain the user ID and password for the IM server from your service provider. 3 To log out, select Options > Logout. Modify your IM settings Select Options > Settings > IM settings and from the following:
Use screen name (shown only if IM groups are supported by the server)To enter a nickname, select Yes. IM presenceTo allow others to see if you are online, select Active for all. Allow messages fromTo allow messages from all, select All. Allow invitations fromTo allow invitations only from your IM contacts, select IM contacts only. IM invitations are sent by IM contacts who want you to join their groups. Msg. scrolling speedSelect the speed at which new messages are displayed. Sort IM contactsSelect how your IM contacts are sorted: Alphabetically or By online status. Availability reloadingTo select how to update information about whether your IM contacts are online or offline, select Automatic or Manual. Offline contactsSelect whether IM contacts with an offline status are shown in the IM contacts list. n w o y M 73 R1114_en.book Page 74 Friday, September 16, 2005 9:36 AM Search for IM groups and users To search for groups, in the IM groups view, select Options > Search. You can search by Group name, Topic, and Members (user ID). To search for users, in the IM contacts view, select Options > New IM contact > Search from server. You can search by User's name, User ID, Phone number, and E-mail address. Join IM groups The IM groups view shows a list of the IM groups that you have saved or are currently joined to. To join a saved IM group, press To join an IM group that is not on the list, but for which you know the group ID, select Options > Join new group. To leave the IM group, select Options > Leave IM group. Chat After you join an IM group, you can view the messages that are exchanged there, and send your own messages. To send a message, write the message in the message editor field, and press
. To send a private message to a participant, select Options > Send private msg.. To reply to a private message sent to you, select the message and Options > Reply. To invite IM contacts who are online to join the IM group, select Options > Send invitation. To prevent receiving messages from certain participants, select Options > Blocking options and the desired option. Record chats To record the messages that are exchanged during a conversation or while you are joined in a IM group, select Options > Record chat. To stop recording, select Options > Stop recording. To view the recorded chats, in the main view, select Recorded chats. View and start conversations The Conversations view shows a list of the individual conversation participants that you have an ongoing conversation with. Ongoing conversations are automatically closed when you exit IM. To view a conversation, scroll to a participant, and press
. To continue the conversation, write your message, and press
. n w o y M 74 R1114_en.book Page 75 Friday, September 16, 2005 9:36 AM To return to the conversations list without closing the conversation, select Back. To close the conversation, select Options > End conversation. To start a new conversation, select Options > New conversation. To save a conversation participant to your IM contacts, select Options > Add to IM contacts. To send automatic replies to incoming messages, select Options > Set auto reply on. You can still receive messages. IM contacts In the IM contacts view, you can retrieve chat contact lists from the server, or add a new chat contact to a contact list. When you log in to the server, the previously used chat contact list is retrieved from the server automatically. Chat server settings Select Options > Settings > Server settings. You may receive the settings in a special text message from the network operator or service provider that offers the chat service. You obtain the user ID and password from your service provider when you register to the service. If you do not know your user ID or password, contact your service provider. ServersView a list of all defined IM servers. Default serverChange the IM server to which you want to connect. IM login typeTo log in automatically when you start IM, select On app. start-up. To add a new server to your list of IM servers, select Servers > Options > New server. Enter the following settings:
Server namethe name for the chat server Access point in usethe access point you want to use for the server Web addressthe URL address of the IM server User IDyour user ID Passwordyour login password Games Press on how to play the game, select Options > Help.
, and select My own and a game. For instructions n w o y M 75 R1114_en.book Page 76 Friday, September 16, 2005 9:36 AM Connectivity Bluetooth connectivity You can connect wirelessly to other compatible devices with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC
(for example, to transfer files); connect to a compatible printer to print images with Image print. See Image print, p. 33. Since devices with Bluetooth technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices. This device is compliant with Bluetooth Specification 1.2 supporting the following profiles: Basic Printing Profile, Generic Access Profile, Serial Port Profile, Dial-up Networking Profile, Headset Profile, Handsfree Profile, Generic Object Exchange Profile, Object Push Profile, File Transfer Profile, Basic Imaging Profile, SIM Access profile, and Human Interface Device Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. Glossary: A profile corresponds to a service or a function, and defines how different devices connect. For example, the Handsfree Profile is used between the handsfree device and the phone. For devices to be compatible, they must support the same profiles. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life. When the device is locked, you cannot use Bluetooth connectivity. See Security, p. 93 for more information on locking the device. y t i v i t c e n n o C 76 R1114_en.book Page 77 Friday, September 16, 2005 9:36 AM Settings
, and select Connect. > Bluetooth. When you Press open the application for the first time, you are asked to define a name for your device. After you set Bluetooth connectivity on and change My phone's visibility to Shown to all, your device and this name can be seen by other users with devices using Bluetooth technology. Select from the following:
BluetoothSelect On or Off. To connect wirelessly to another compatible device, first set Bluetooth connectivity On, then establish a connection. My phone's visibilityTo allow your device to be found by other devices with Bluetooth technology, select Shown to all. To hide it from other devices, select Hidden. My phone's nameEdit the name of your device. Remote SIM modeTo enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On. Remote SIM mode To use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device. Before the mode can be activated, the two devices must be paired and the pairing initiated from the other device. y t i v i t c e n n o C 77 When pairing, use a 16-digit passcode, and set the other device as authorized. See Pair devices, p. 11. Activate the remote SIM mode from the other device. When remote SIM mode is on in your Nokia XX, #Remote SIM is displayed in the standby mode. The connection to the wireless network is turned off, as indicated by in the signal strength indicator area, and you cannot use SIM card services or features requiring cellular network coverage. Warning: In the remote SIM mode, you cannot make or receive any calls with your device, except make calls to certain emergency numbers, or use other features that require network coverage. To make calls, you must first leave the remote SIM mode. If the device has been locked, enter the lock code. To leave the remote SIM mode, press the power key, and select Exit rem. SIM mode. Security tips When you are not using Bluetooth connectivity, select Bluetooth > Off or My phone's visibility > Hidden. Do not pair with an unknown device. R1114_en.book Page 78 Friday, September 16, 2005 9:36 AM Send data using Bluetooth connectivity Several Bluetooth connections can be active at a time. For example, if you are connected to a headset, you can also transfer files to another compatible device at the same time. Bluetooth connectivity indicators When is shown in the standby mode, Bluetooth connectivity is on. When is blinking, your device is trying to connect with another device. When is shown continuously, data is being transmitted using Bluetooth connectivity. Tip! To send text using Bluetooth connectivity, open Notes, write the text, and select Options > Send > Via Bluetooth. 1 Open the application where the item you want to send is stored. For example, to send an image to another compatible device, open Gallery. 2 Select the item and Options > Send > Via Bluetooth. Devices with Bluetooth technology within range start to appear on the display. Device icons:
video device, and other device. To interrupt the search, select Stop. computer, audio or phone, 3 Select the device with which you want to connect. 4 If the other device requires pairing before data can be transmitted, a tone sounds, and you are asked to enter a passcode. See Pair devices, p. 11. 5 When the connection has been established, Sending data is shown. The Sent folder in Messaging does not store messages sent using Bluetooth connectivity. Tip! When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, enter the code
*#2820# in the standby mode.
), in the Bluetooth Pair devices To open the paired devices view (
application main view, press
. Before pairing, create your own passcode (116 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once. To pair with a device, select Options > New paired device. Devices with wireless Bluetooth technology within range start to appear on the display. Select the device, and enter the passcode. The same passcode must be entered on the other device as well. After pairing, the device is saved to the paired devices view. y t i v i t c e n n o C 78 R1114_en.book Page 79 Friday, September 16, 2005 9:36 AM Paired devices are indicated by in the device search. To set a device as authorized or unauthorized, scroll to a device, and select from the following options:
Set as authorizedConnections between your device and this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust. devices view. Set as unauthorizedConnection requests from this device must be accepted separately every time. To cancel a pairing, scroll to the device, and select Options > Delete. If you want to cancel all pairings, select Options > Delete all. indicates authorized devices in the paired Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, and the connection is switched off. Receive data using Bluetooth connectivity When you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, placed in the Inbox folder in Messaging. Messages is shown, and the item is received through Bluetooth connectivity are indicated by
. See Inboxreceive messages, p. 42. Switch off Bluetooth connectivity To switch off Bluetooth connectivity, select Bluetooth >
Off. Infrared connection With infrared, you can transfer data such as business cards, calendar notes, and media files with a compatible device. Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product. Send and receive data using infrared 1 Make sure that the infrared ports of the sending and receiving devices are pointing at each other, and that there are no obstructions between the devices. The preferable distance between the two devices is up to 1 meter (3 feet). 2 The user of the receiving device activates the infrared port. y t i v i t c e n n o C 79 R1114_en.book Page 80 Friday, September 16, 2005 9:36 AM To activate the infrared port of your device to receive
, and select Connect. >
data through infrared, press Infrared. 3 The user of the sending device selects the desired infrared function to start the data transfer. To send data through infrared, locate the desired file in an application or the file manager, and select Options > Send > Via infrared. If data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be started again. All items received through infrared are placed in the Inbox folder in Messaging. New infrared messages are indicated by When other device or a connection has been lost. When connection is active, and your device is ready to send and receive data using its infrared port. blinks, your device is trying to connect to the is shown continuously, the infrared
. Data cable
, and select Connect. > Data cable. In Data cable Press mode, select what the USB data cable connection is used for: PC Suite or Data transfer. To have the device ask the purpose of the connection each time the cable is connected, select Ask on connection. PC connections You can use your device with a variety of PC connectivity and data communications applications. With Nokia PC Suite you can, for example, transfer images between your device and a compatible PC. Always create the connection from the PC to synchronize with your device. Your device as a modem You can use your device as a modem to send and receive e-mail, or to connect to the Internet with a compatible PC by using Bluetooth connectivity, infrared, or a USB data cable. Detailed installation instructions can be found in the User Guide for Nokia PC Suite. Tip! When using Nokia PC Suite for the first time, to connect your device to a compatible PC and to use Nokia PC Suite, use the Get Connected wizard available in Nokia PC Suite. y t i v i t c e n n o C 80 R1114_en.book Page 81 Friday, September 16, 2005 9:36 AM Connection manager
, and select Connect. > Conn. mgr.. To view the Press status of data connections or end connections in GSM and UMTS network, select Active data connections. Data connections In the active connections view, you can see the open data connections: data calls (
) and packet data connections
and
). Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth. To end a connection, select Options > Disconnect. To close all open connections, select Options > Disconnect all. To view the details of a connection, select Options >
Details. The details shown depend on the connection type. Synchronization
, and select Connect. > Sync. Sync enables you Press to synchronize your notes, calendar, contacts, or e-mail y t i v i t c e n n o C 81 with various compatible calendar and address book applications on a compatible computer or on the Internet. You can also create or edit synchronization settings. The synchronization application uses SyncML technology for synchronization. For information on SyncML compatibility, contact the supplier of the application with which you want to synchronize your device data. You may receive synchronization settings in a special text message. See Data and settings, p. 43. Synchronize data In the Sync main view, you can see the different synchronization profiles. 1 Select a synchronization profile and Options >
Synchronize. The status of the synchronization is shown on the display. To cancel synchronization before it finishes, select Cancel. 2 You are notified when the synchronization is complete. Select Yes to view the log file showing the synchronization status and how many entries have been added, updated, deleted, or discarded (not synchronized) in your device or on the server. R1114_en.book Page 82 Friday, September 16, 2005 9:36 AM Device manager
, and select Connect. > Dev. mgr.. You may Press receive server profiles and different configuration settings from your network operator, service provider, or company information management department. These configuration settings may include access point settings for data connections and other settings used by different applications in your device. To connect to a server and receive configuration settings for your device, scroll to a profile, and select Options >
Start configuration. To allow or deny receiving of configuration settings from service providers, select Options > Enable config. or Disable config.. Server profile settings Contact your service provider for the correct settings. Server nameEnter a name for the configuration server. Server IDEnter the unique ID to identify the configuration server. Server passwordEnter a password to identify your device to the server. Access pointSelect an access point to be used when connecting to the server. Host addressEnter the URL address of the server. PortEnter the port number of the server. User name and PasswordEnter your user name and password. Allow configurationTo receive configuration settings from the server, select Yes. Auto-accept all reqs.If you want your device to ask for confirmation before accepting a configuration from the server, select No. y t i v i t c e n n o C 82 R1114_en.book Page 83 Friday, September 16, 2005 9:36 AM Office Calculator To add, substract, multiply, divide, and calculate square roots and percentages, press Calculator.
, and select Office >
Note: This calculator has limited accuracy and is designed for simple calculations. Set base currency and exchange rates Select Type > Currency > Options > Currency rates. Before you can make currency conversions, you must select a base currency and add exchange rates. The rate of the base currency is always 1. Note: When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero. Converter Notes To convert measures from one unit to another, press and select Office > Converter. Converter has limited accuracy, and rounding errors may occur. 1 In the Type field, select the measure you want to use. 2 In first Unit field, select the unit from which you want
, to convert. In the next Unit field, select the unit to which you want to convert. 3 In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value.
, and select Office > Notes. You To write notes, press can send notes to compatible devices, and save plain text files (.txt format) that you receive to Notes. To print a note on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print. e c i f f O 83 R1114_en.book Page 84 Friday, September 16, 2005 9:36 AM e c i f f O Recorder To record voice memos, press Recorder. To record a telephone conversation, open Recorder during a voice call. Both parties hear a tone every 5 seconds during recording.
, and select Office >
84 R1114_en.book Page 85 Friday, September 16, 2005 9:36 AM Personalize your device Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information. The open applications, and folders that have applications open, are indicated by a small icon (ICON) in the main menu. To use the standby display for fast access to your most frequently used applications, see Active standby mode, p. 11. To change the standby mode background image or what is shown in the screen saver, see Change the look of your device, p. 10. To customize the ringing tones, see Profilesset tones, p. 9 and Add ringing tones for contacts, p. 63. To change the shortcuts assigned for the different presses of the scroll key and left and right selection keys in the standby mode, see Standby mode, p. 89. To change the clock shown in the standby mode, press
, and select Clock > Options > Settings > Clock type > Analog or Digital. To change the welcome note to an image or animation,
, and select Tools > Settings > Phone >
press General > Welcome note or logo. To change the main menu view, in the main menu, select Options > View > Grid or List. To rearrange the main menu, in the main menu, select Options > Move, Move to folder, or New folder. You can move less used applications into folders, and place applications that you use more often into the main menu. Profilesset tones To set and customize the ringing tones, message alert tones, and other tones for different events, environments, or caller groups, press
, and select Tools > Profiles. e c i v e d r u o y e z i l a n o s r e P 85 R1114_en.book Page 86 Friday, September 16, 2005 9:36 AM to in the standby mode. To change the profile, press Scroll to the profile you want to activate, and select OK.
, and select Tools > Profiles. To modify a profile, press Scroll to the profile, and select Options > Customize. Scroll to the setting you want to change, and press open the choices. Tones stored on the memory card are indicated with
. You can scroll through the tone list and listen to each one before you make your selection. To stop the sound, press any key. When you choose a tone, Tone downloads opens a list of bookmarks. You can select a bookmark and start connection to a Web page to download tones. If you want the callers name to be said when your device rings, select Options > Customize, and set Say callers name to On. The callers name must be saved in Contacts. To create a new profile, select Options > Create new. Offline profile The Offline profile lets you use the device without connecting to the wireless network. When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by strength indicator area. All wireless phone signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later. in the signal Warning: In the offline profile you cannot make (or receive) any calls, except make calls to certain emergency numbers, or use other features that require network coverage. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code. Warning: Your device must be switched on to use Offline profile. Do not switch the device on when wireless device use is prohibited or when it may cause interference or danger. To leave the Offline profile, press the power key, and select another profile. The device re-enables wireless transmissions (providing there is sufficient signal strength). If a Bluetooth connection is activated before entering the Offline profile, it will be deactivated. A Bluetooth connection is automatically reactivated after leaving the Offline profile. See Settings, p. 77. Change the look of your device To change the look of the display, such as the wallpaper
, and select Tools > Themes. The active and icons, press theme is indicated by together elements from other themes or select images from the Gallery to personalize themes further. The
. In Themes you can group e c i v e d r u o y e z i l a n o s r e P 86 R1114_en.book Page 87 Friday, September 16, 2005 9:36 AM themes on the memory card (if inserted) are indicated by
. The themes on the memory card are not available if the memory card is not inserted in the device. If you want to use the themes saved in the memory card without the memory card, save the themes in the device memory first. To open a browser connection and download more themes, select Theme downloads. To activate a theme, scroll to it, and select Options >
Apply. To preview a theme before activating it, select Options > Preview. To edit themes, scroll to a theme, and select Options >
Edit to change the Wallpaper and Power saver settings. To restore the selected theme to its original settings, select Options > Restore orig. theme when you edit a theme. Active standby mode Use your standby display for fast access to your most frequently used applications. By default, the active standby mode is on. Press mode > Active standby, and press standby on or off.
, select Tools > Settings > Phone > Standby to switch the active
. The active standby display is shown with default applications across the top of the screen, and calendar, to-do, and player events listed below. Scroll to an application or event, and press The standard scroll key shortcuts available in the standby mode cannot be used when the active standby mode is on. To change the default applications shortcuts, press select Tools > Settings > Phone > Standby mode > Active standby apps., and press Some shortcuts may be fixed, and you are not able to change them.
. e c i v e d r u o y e z i l a n o s r e P 87 R1114_en.book Page 88 Friday, September 16, 2005 9:36 AM Tools ICON- Media key To open the shortcut assigned to the multimedia key, press
. To open a list of multimedia applications, and hold press
. To open the desired application, use the scroll key. To exit the list without selecting an application, press and hold To change the shortcuts, press
, and scroll down. To change the default shortcut, select Multimedia key. To change the applications that are shown when you press
, select Top, Left, Middle, and Right and the application. Some shortcuts may be fixed, and you are not able to change them. Settings To change settings, press To open a settings group, press want to change, and press
, and select Tools > Settings. Scroll to a setting you Some settings may be preset for the device by your network operator or service provider, and you may not be able to change them. Phone settings General Phone languageChanging the language of the display texts in your device also affects the format used for date and time and the separators used, for example, in calculations. Automatic selects the language according to the information on your SIM card. After you change the display text language, the device restarts. Changing the settings for Phone language or Writing language affects every application in your device, and the change remains effective until you change these settings again. Writing languageChanging the language affects the characters and special characters available when writing text and the predictive text dictionary used. s l o o T 88 R1114_en.book Page 89 Friday, September 16, 2005 9:36 AM Predictive textSet the predictive text input On or Off for all editors in the device. The predictive text dictionary is not available for all languages. Welcome note or logoThe welcome note or logo is displayed briefly each time you switch on the device. Select Default to use the default image, Text to write a welcome note, or Image to select an image from Gallery. Orig. phone settingsYou can reset some of the settings to their original values. To do this, you need the lock code. See Security, Phone and SIM, p. 15. After resetting, the device may take a longer time to power on. Documents and files are unaffected. Standby mode Active standbyUse shortcuts to applications in the standby mode. See Active standby mode, p. 87. Left selection keyAssign a shortcut to the left selection key (
Right selection keyAssign a shortcut to the right selection key (
Active standby apps.Select the application shortcuts you want to appear in the active standby. This setting is only available if Active standby is on. You can also assign keypad shortcuts for the different presses of the scroll key. The scroll key shortcuts are not available if the active standby is on.
) in the standby mode.
) in the standby mode. Operator logoThis setting is only available if you have received and saved an operator logo. Select Off if you do not want the logo to be shown. Display BrightnessAdjust the basic brightness level of the display to lighter or darker. However, in extreme light conditions, the brightness of the display is automatically adjusted. Pwr. saver time-outSelect the time-out period after which the ?screen saver is activated. Light time-outSelect a time-out after which the backlight of the display is switched off. Power saver LEDSelect whether the display is switched off to save battery power 20 minutes after the ?screen saver is activated. When the display is switched off, a LED blinks to indicate that the device is powered on. Call settings Send my caller IDYou can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription
(Set by network) (network service). s l o o T 89 R1114_en.book Page 90 Friday, September 16, 2005 9:36 AM Call waitingIf you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function is activated (Check status). Reject call with SMSSelect Yes to send a text message to a caller informing why you could not answer the call. See Answer or reject a call, p. 57. Message textWrite a text to be sent in a text message when you reject a call. Automatic redialSelect On, and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press Summary after callActivate this setting if you want the device to briefly display the approximate duration of the last call. 1-touch dialingSelect On, and the numbers assigned to the 1-touch dialing keys (
pressing and holding the key. See also Speed dial a phone number, p. 52. Anykey answerSelect On, and you can answer an incoming call by briefly pressing any keypad key, except
) can be dialled by
, and
. Line in useThis setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode. Tip! To switch between the phone lines, press and hold in the standby mode. Line changeTo prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code. Connection settings Data connections and access points Your device supports packet data connections, such as GPRS in the GSM network. When you use your device in GSM and UMTS networks, multiple data connections can be active at the same time, and access points can share a data connection. To establish a data connection, an access point is required. You can define different kinds of access points, such as:
s l o o T 90 R1114_en.book Page 91 Friday, September 16, 2005 9:36 AM MMS access point to send and receive multimedia messages Access point for the Web application to view WML or XHTML pages Internet access point (IAP) to send and receive e-mail and connect to the Internet Check the type of access point you need with your service provider for the service you want to access. For availability and subscription to packet data connection services, contact your network operator or service provider. Access points You may receive access point settings in a message from a service provider. See Data and settings, p. 43. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them. indicates a protected access point. indicates a packet data access point. To create a new access point, select Options > New access point. To edit the settings of an access point, select Options > Edit. Follow the instructions from your service provider. Connection nameEnter a descriptive name for the connection. Data bearerSelect the data connection type. Depending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider. To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card. Packet data Follow the instructions from your service provider. Access point nameYou obtain the access point name from your network operator or service provider. User nameThe user name may be needed to make a data connection, and is usually provided by the service provider. Prompt passwordIf you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes. PasswordA password may be needed to make a data connection, and is usually provided by the service provider. AuthenticationSelect Normal or Secure. HomepageDepending on the access point you are setting up, enter the Web address or the address of the multimedia messaging center. s l o o T 91 R1114_en.book Page 92 Friday, September 16, 2005 9:36 AM Select Options > Advanced settings to change the following settings:
Network typeSelect the Internet protocol type to use:
IPv4 settings or IPv6 settings. The other settings depend on the selected network type. Phone IP address (for IPv4 only)Enter the IP address of your device. DNS addressIn Primary name server:, enter the IP address of the primary DNS server. In Second. name server:, enter the IP address of the secondary DNS server. Contact your Internet service provider to obtain these addresses. Proxy serv. addressDefine the address for the proxy server. Proxy port numberEnter the proxy port number. HomepageDefine a home page. Select Options > Advanced settings and from the following:
IPv4 settings: Phone IP address (the IP address of your device), Subnet mask (the subnet IP address), Default gateway (the gateway), and DNS addressenter the IP addresses of the primary and secondary DNS server. Contact your Internet service provider for these addresses. IPv6 settings > DNS addressSelect Automatic, Well-
known, or User defined. Ad-hoc channel (only for Ad-hoc)To enter a channel number (1-11) manually, select User defined. Proxy serv. addressEnter the address for the proxy server. Proxy port numberEnter the proxy port number. Packet data The packet data settings affect all access points using a packet data connection. Packet data conn.If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or action that needs it. Access pointThe access point name is needed to use your device as a packet data modem to your computer. Configurations You may receive trusted server settings from your network operator or service provider in a configuration message, or s l o o T 92 R1114_en.book Page 93 Friday, September 16, 2005 9:36 AM s l o o T the settings may be stored on your (U)SIM card. You can save these settings to your device, view, or delete them in Configurations. Date and time See Clock settings, p. 12, and language settings in General, p. 9. Security Phone and SIM PIN code requestWhen active, the code is requested each time the device is switched on. Deactivating the personal identification number (PIN) code request may not be allowed by some SIM cards. See Glossary of PIN and lock codes, p. 15. PIN code, PIN2 code, and Lock codeYou can change the lock code, PIN code, and PIN2 code. These codes can only include the numbers from 0 to 9. If you forget any of these codes, contact your service provider. See Glossary of PIN and lock codes, p. 15. 93 Avoid using access codes similar to the emergency numbers to prevent accidental dialing of the emergency number. Autolock periodYou can set an autolock period, a time-out after which the device automatically locks. To turn off the autolock period, select None. To unlock the device, enter the lock code. When the device is locked, calls still may be possible to the official emergency number programmed into your device. A list of Tip! To lock the device manually, press commands opens. Select Lock phone. Lock if SIM changedYou can set the device to ask for the lock code when an unknown SIM card is inserted into your device. The device maintains a list of SIM cards that are recognized as the owners cards. Closed user groupYou can specify a group of people to whom you can call and who can call you (network service). When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your device. Confirm SIM servicesYou can set the device to display confirmation messages when you are using a SIM card service (network service). Glossary of PIN and lock codes R1114_en.book Page 94 Friday, September 16, 2005 9:36 AM If you forget any of these codes, contact your service provider. Personal identification number (PIN) codeThis code protects your SIM card against unauthorized use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it. UPIN codeThis code may be supplied with the USIM card. The USIM card is an enhanced version of the SIM card and is supported by UMTS mobile phones. PIN2 codeThis code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device. Lock code (also known as security code)This code (5 digits) can be used to lock the device to avoid unauthorized use. The factory setting for the lock code is 12345. To avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from your device. If you forget the code, contact your service provider. Personal unblocking key (PUK) code and PUK2 codeThese codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your device. UPUK codeThis code (8 digits) is required to change a blocked UPIN code. If the code is not supplied with the USIM card, contact the operator whose USIM card is in your device. Certif. management Digital certificates do not guarantee safety; they are used to verify the origin of software. In the certificate management main view, you can see a list of authority certificates that are stored in your device. Press to see a list of personal certificates, if available. Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software. Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown s l o o T 94 R1114_en.book Page 95 Friday, September 16, 2005 9:36 AM even if the certificate should be valid, check that the current date and time in your device are correct. View certificate detailscheck authenticity You can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked. You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device. To check certificate details, scroll to a certificate, and select Options > Certificate details. When you open certificate details, the validity of the certificate is checked, and one of the following notes may be displayed:
Certificate not trustedYou have not set any application to use the certificate. See Change the trust settings, p. 16. Expired certificateThe period of validity has ended for the selected certificate. Certificate not valid yetThe period of validity has not yet begun for the selected certificate. Certificate corruptedThe certificate cannot be used. Contact the certificate issuer. Change the trust settings Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example:
Symbian installation: YesThe certificate is able to certify the origin of a new Symbian operating system application. Internet: YesThe certificate is able to certify servers. App. installation: YesThe certificate is able to certify the origin of a new JavaTM application. Select Options > Edit trust setting to change the value. Track protect. object Some copyright-protected music files may include a transaction identifier. Select whether you allow the identifier to be sent with the music file if you send or forward the file. The provider of the music file can use the identifier to track the distribution of the files. Call diverting s l o o T 95 R1114_en.book Page 96 Friday, September 16, 2005 9:36 AM Call diverting allows you to divert your incoming calls to your voice mailbox or another phone number. For details, contact your service provider. Select which calls you want to divert and the desired divert option. To divert voice calls when your number is busy or when you reject incoming calls, select If busy. Set the option on (Activate) or off (Cancel), or check whether the option is activated (Check status). Several divert options can be active at the same time. When all calls are diverted, standby mode. Call barring and call diverting cannot be active at the same time. is shown in the Call barring Call barring (network service) allows you to restrict the calls that you make or receive with the device. To change the settings, you need the barring password from your service provider. Select the desired barring option, and set it on (Activate) or off (Cancel), or check whether the option is active
(Check status). Call barring affects all calls, including data calls. Call barring and call diverting cannot be active at the same time. When calls are barred, calls may be possible to the official emergency number programmed into your device. s l o o T Network Your device can automatically switch between the GSM and UMTS networks. The GSM network is indicated with in the standby mode. The UMTS network is indicated
. with Network mode (shown only if supported by the operator)Select which network to use. If you select Dual mode, the device uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the network operators. Contact your network operator for more details. Operator selectionSelect Automatic to set the device to search for and select one of the available networks, or Manual to manually select the network from a list of networks. If the connection to the manually selected network is lost, the device sounds an error tone and asks you to reselect a network. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your device. 96 R1114_en.book Page 97 Friday, September 16, 2005 9:36 AM s l o o T Glossary: A roaming agreement is an agreement between two or more network service providers to enable the users of one service provider to use the services of other service providers. Cell info displaySelect On to set the device to indicate when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception. Enhancement settings indicates a headset is In the standby mode, that the headset is unavailable, or a connected, and indicates a Bluetooth connection to a headset is lost. that a TTY is connected. loopset is connected and Select Headset, Loopset, TTY, Bluetooth handsfree, or Music stand and from the following:
Default profileSet the profile that you want activated each time you connect a certain enhancement to your device. See Profilesset tones, p. 85. Automatic answerSet if you want the device to answer an incoming call automatically after 5 seconds. If the Ringing type is set to Beep once or Silent, automatic answer is disabled. Automatic answer is not available for TTY. 97 Lights (for music stand only)Set whether lights remain on, or are switched off after the time-out. If you are using a TTY, you must activate it on your device.
, and select Tools > Settings > Enhancement >
Press TTY > Use TTY > Yes. Voice commands You can use voice commands to control your device. For more information about the enhanced voice commands supported by your device, see Voice dialing, p. 52. To activate enhanced voice commands for starting applications and profiles, you must open the Voice com. application and its Profiles folder. Press
, and select Tools > Voice com. > Profiles; the device creates voice tags for the applications and profiles. To use enhanced voice commands, press and hold in the standby mode, and say a voice command. The voice command is the name of the application or profile displayed in the list. To add more applications to the list, select Options > New application. To add a second voice command that can be used to start the application, select Options > Change command, and enter the new voice command as text. Avoid very short names, abbreviations, and acronyms. R1114_en.book Page 98 Friday, September 16, 2005 9:36 AM To listen to the synthesized voice tag, select Options >
Playback. To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays recognized voice tags and commands in the selected device language, select Synthesizer > Off. To reset voice recognition learning, for example, when the main user of the device has changed, select Reset voice adapts.. Application manager
, and select Tools > Manager. You can install two Press types of applications and software to your device:
J2ME applications based on Java technology with the extension .jad or .jar (
). Other applications and software suitable for the
). The installation files Symbian operating system (
have the .sis extension. Only install software specifically designed for your Nokia NXX. Software providers will often refer to the official model number of this product: the Nokia NXX-X. Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity or infrared. You can use Nokia Application Installer in Nokia PC Suite to install an application to your device. If you use Microsoft Windows Explorer to transfer a file, save the file to a memory card (local disk). Install applications and software indicates a .sis application, that the application is not fully installed,and a Java application, that the application is installed on the memory card. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. Before installation, note the following:
To view the application type, version number, and the supplier or manufacturer of the application, select Options > View details. To display the security certificate details of the application, select Options > View certificate. See Certif. management, p. 15. If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full back-up copy of the removed software package. To restore the original application, remove the application, and install the application again from the original installation file or the back-up copy. s l o o T 98 R1114_en.book Page 99 Friday, September 16, 2005 9:36 AM The .jar file is required for installing Java applications. If it is missing, the device may ask you to download it. If there is no access point defined for the application, you are asked to select one. When you are downloading the .jar file, you may need to enter a user name and password to access the server. You obtain these from the supplier or manufacturer of the application. 1 To locate an installation file, press
, and select Tools > Manager. Alternatively, search the device memory or a memory card (if inserted) in File mgr., or open a message in Messaging > Inbox that contains an installation file. 2 In Manager, select Options > Install. In other applications, scroll to the installation file, and press to start the installation. During installation, the device shows information about the progress of the installation. If you are installing an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application. To start an installed application, locate it in the menu, and press To start a network connection and to view extra information about the application, select Options > Go to web address, if available. To see what software packages are installed or removed and when, select Options > View log. To send your installation log to a help desk so that they can see what is installed or removed, select Options > Send log > Via text message or Via e-mail (available only if the correct e-mail settings are in place). Remove applications and software Scroll to a software package, and select Options >
Remove. Select Yes to confirm. If you remove software, you can only reinstall it if you have the original software package or a full backup of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software. Note: If another software package depends on the software package that you removed, the other software package may stop working. Refer to the documentation of the installed software package for details. Settings Select Options > Settings and from the following:
Software installationSelect whether Symbian software can be installed: On, Signed only, or Off. s l o o T 99 R1114_en.book Page 100 Friday, September 16, 2005 9:36 AM Online certif. checkSelect to check the online certificates before installing an application. Default web addressSet the default address used when checking online certificates. Some Java applications may require a phone call, a message to be sent, or a network connection to a specific access point for downloading extra data or components. In the Manager main view, scroll to an application, and select Options > Suite settings to change settings related to that specific application. Activation keys for copyright-protected files Copyright protections may prevent some images, music
(including ringing tones), and other content from being copied, modified, transferred or forwarded. To view the digital rights activation keys stored in your device, press the following:
Valid keysView keys that are connected to one or more media files and keys whose validity period has not started yet.
, and select Tools > Activ. keys and from s l o o T Invalid keysView keys that are not valid; the time period for using the media file is exceeded or there is a protected media file in the device but no connected activation key. Keys not in useView keys that have no media files connected to them in the device. To buy more usage time or extend the usage period for a media file, select an invalid activation key and Options >
Activate content. Activation keys cannot be updated if Web service message reception is disabled. See Web service messages, p. 44. To view detailed information, such as the validity status and ability to send the file, scroll to an activation key, and press
. 100 R1114_en.book Page 101 Friday, September 16, 2005 9:36 AM Troubleshooting Q&A Access codes Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer. If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your network service provider. For information about passwords, contact your access point provider, for example, a commercial Internet service provider (ISP), service provider, or network operator. Application not responding Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold
. Scroll to the application, and press to close the application. Bluetooth connectivity Q: Why cant I find my friends device?
A: Check that both devices have activated Bluetooth connectivity. Check that the distance between the two devices is not over 10 meters (33 feet) and that there are no walls or other obstructions between the devices. Check that the other device is not in hidden mode. Check that both devices are compatible. Q: Why cant I end a Bluetooth connection?
A: If another device is connected to your device, you can either end the connection using the other device or by deactivating Bluetooth connectivity. Select Connect. >
Bluetooth > Off. Browser services Q: What do I do if the following message is displayed: No valid access point defined. Define one in Web settings.?
A: Insert the correct browser settings. Contact your service provider for instructions. Camera Q: Why do images look smudgy?
A: Remove the protective plastic films covering the display and camera. Ensure that the camera lens protection window is clean. Display Q: Why do missing, discolored, or bright dots appear on the screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault. g n i t o o h s e l b u o r T 101 R1114_en.book Page 102 Friday, September 16, 2005 9:36 AM Log Q: Why does the log appear empty?
A: You may have activated a filter, and no communication events fitting that filter have been logged. To see all events, select My own > Log > Options > Filter > All communication. Memory low Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid memory getting low:
Messages from Inbox, Drafts, and Sent folders in Messaging Retrieved e-mail messages from the device memory Saved browser pages Images and photos in Gallery To delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and one of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item). Q: How can I save my data before deleting it?
A: Save your data using one of the following methods:
Use Nokia PC Suite to make a backup copy of all data to a compatible computer. Send images to your e-mail address, then save the images to your computer. Send data using Bluetooth connectivity to a compatible device. Store data on a compatible memory card. Messaging Q: Why cant I select a contact?
A: The contact card does not have a phone number or an e-mail address. Add the missing information to the contact card in Contacts. Multimedia messaging Q: What should I do when the device cannot receive a multimedia message because memory is full?
A: The amount of memory needed is indicated in the error message: Not enough memory to retrieve message. Delete some data first. To view what kind of data you have and how much memory the different data groups consume, select File manager > Options > Memory details. Q: The note Retrieving message is shown briefly. What is happening?
A: The device is trying to retrieve a multimedia message from the multimedia messaging center. Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses. Select Messaging > Options >
Settings > Multimedia message. g n i t o o h s e l b u o r T 102 R1114_en.book Page 103 Friday, September 16, 2005 9:36 AM Q: How can I end the data connection when the device starts a data connection again and again?
A: To stop the device from making a data connection, select Messaging and one of the following:
On receiving msg. > Defer retrievalTo have the multimedia messaging centre save the message to be retrieved later, for example, after you have checked the settings. After this change, the device still needs to send information notes to the network. To retrieve the message now, select Retr. immediately. On receiving msg. > Reject messageTo reject all incoming multimedia messages. After this change, the device needs to send information notes to the network, and the multimedia messaging centre deletes multimedia messages that are waiting to be sent to you. Multimedia reception > OffTo ignore all incoming multimedia messages. After this change, the device does not make any network connections related to multimedia messaging. PC connectivity Q: Why do I have problems in connecting the device to my PC?
A: Make sure that Nokia PC Suite is installed and running on your PC. See the User Guide for Nokia PC Suite on the CD-ROM. For further information on how to use Nokia PC Suite, see the help function on Nokia PC Suite or visit the support pages at www.nokia.com. g n i t o o h s e l b u o r T 103 R1114_en.book Page 104 Friday, September 16, 2005 9:36 AM Battery information Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15C and 25C (59F and 77F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging and inspect the hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for n o i t a m r o f n i y r e t t a B 104 R1114_en.book Page 105 Friday, September 16, 2005 9:36 AM assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase. Authenticate hologram 1 When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. 2 When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively. 3 Scratch the side of the label to reveal a 20-digit code, for example 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. n o i t a m r o f n i y r e t t a B 105 4 Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message, key in the 20-digit code, for example 12345678919876543210, and send to
+44 7786 200276. National and international operator chargers will apply. You should receive a message indicating whether the code can be authenticated. What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery. R1114_en.book Page 106 Friday, September 16, 2005 9:36 AM Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. Do not attempt to open the device other than as instructed in this guide. Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Do not paint the device. Paint can clog the moving parts and prevent proper operation. Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses). Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices. Use chargers indoors. Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. e c n a n e t n i a m d n a e r a C 106 R1114_en.book Page 107 Friday, September 16, 2005 9:36 AM Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 cm (5/8 in) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-
stated distance from your body. In order to transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed. Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with a hearing aid should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 cm (6 in) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should:
always keep the device more than 15.3 cm (6 in) from their pacemaker;
not carry the device in a breast pocket; and hold the device to the ear opposite the pacemaker to minimise the potential for interference. If you suspect interference, switch off your device and move the device away. n o i t a m r o f n i y t e f a s l a n o i t i d d A 107 R1114_en.book Page 108 Friday, September 16, 2005 9:36 AM Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders. Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. n o i t a m r o f n i y t e f a s l a n o i t i d d A 108 R1114_en.book Page 109 Friday, September 16, 2005 9:36 AM To make an emergency call:
1 If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device. 2 Press as many times as needed to clear the display and ready the device for calls. 3 Enter the official emergency number for your present location. Emergency numbers vary by location. key. 4 Press the If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. Warning: In the offline profile you cannot make (or receive) any calls, except make calls to certain emergency numbers, or use other features that require network coverage. Warning: You cannot make emergency calls in the Imaging mode, because the keypad is not active. To make an emergency call, activate the Fold open mode. Certification information (SAR) THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organisations through periodic and thorough evaluation of scientific studies. The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg)*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output of the device. The highest SAR value for this device when tested for use at the ear is 0.41 W/kg. n o i t a m r o f n i y t e f a s l a n o i t i d d A 109 R1114_en.book Page 110 Friday, September 16, 2005 9:36 AM SAR values may vary depending on national reporting and testing requirements and the network band. Use of device accessories and enhancements may result in different SAR values. Additional SAR information may be provided under product information at www.nokia.com.
* The SAR limit for mobile devices used by the public is 2.0 W/
kg averaged over ten grams of body tissue. The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at www.nokia.com. n o i t a m r o f n i y t e f a s l a n o i t i d d A 110 R1114_en.book Page 111 Friday, September 16, 2005 9:36 AM A access points 117 settings 118 activation keys 128 alarms alarm clock 11 calendar 86 applications installing 126 Java 126 B backing up 125 Bluetooth 107 connecting two devices, pairing 109 device address 109 factory set passcode 109 headset 124 pairing 109 passcode, glossary explanation 109 security 108 switching off 110 bookmarks 89 brightness display 116, 124 setting in camera 36, 43 C cache, clearing 92 calendar alarm 85 creating entries 85 synchronising PC Suite 86 call register See log calls camera dialled numbers 28 duration 28 international 20 received 28 settings 116 settings for call divert 122 transferring 27 adjusting brightness 36, 43 adjusting colour and lighting 39 adjusting flash settings 36 adjusting video recorder settings 44 edit videos 45 flash 38 image setup settings 36, 39 saving video clips 43 scenes 39 self-timer 38 sending images 37 sequence mode 38 still image camera settings 40 111 R1114_en.book Page 112 Friday, September 16, 2005 9:36 AM CD-ROM 110 certificates 121 chat See instant messaging clear screen See standby mode clearing memory log information 130 clock 11 alarm 11 settings 11 codes 120 lock code PIN code 121 PIN2 code 121 security code 121 computer connections 110 conference call 20 connection settings 117 contact cards 31 inserting pictures 31 sending 32 storing DTMF tones 28 copying contacts between the SIM card and device memory 32 text 72 copyright protection see activation keys 112 cutting text 72 D data connections details 111 ending 111 indicators 9 date 11 digital rights management, DRM see activation keys DNS, domain name service, glossary explanation 119 E editing videos adding effects 45 adding sound clips 45 adding transitions 45 custom video clips 45 e-mail 73 automatic retrieving 78 offline 79 opening 77 remote mailbox 76 retrieving from mailbox 77 settings 81 viewing attachments 77 F file formats
.jad 126 R1114_en.book Page 113 Friday, September 16, 2005 9:36 AM
.jar 126, 127
.sis 126 RealOne Player 65 file manager 12 fixed dialing 32 FM radio 104 G gallery ordering files in albums 51 H handsfree see loudspeaker headset settings 124 help application 10 I indicators 9 instant messaging 97 blocking 99 connecting to a server 98 groups 101 recording messages 99 sending instant messages 99 user ID, glossary explanation 100 Internet See Web Internet access points (IAP) See access points IP address, glossary explanation 119 J Java See applications L lock code 121 log erasing contents 30 filtering 29 log duration 30 loopset settings 124 loudspeaker 12 M mailbox 76 automatic retrieving 78 media files fast forward 66 file formats 65 mute sound 66 rewind 66 clearing memory 28, 29 viewing memory consumption 13 memory memory card 125 memory card adapter see the Quick Start Guide, reduced-size MultiMediaCard adapter 113 R1114_en.book Page 114 Friday, September 16, 2005 9:36 AM menu, rearranging 15 messaging e-mail 73 multimedia messages 73 text messages 73 movies, muvees custom muvees 67 quick muvees 67 multimedia messages 73 mute sound 66 P packet data connections 111 GPRS, glossary explanation 117 settings 119 pasting text 72 PC connections via Bluetooth or USB cable 110 PC Suite calendar data 86 synchronisation 110 transferring images to a PC 50 transferring media files 13 transferring music files to your memory card 65 viewing phone memory data 13 personalisation 17 phonebook See contact cards PIN code 121 114 profiles 16 R radio 104 reminder See calendar, alarm remote mailbox 76 ringing tones personal ringing tone 33 receiving in a text message 76 RSMMC, reduced-size MMC see the Quick Start Guide S scenes image scenes 39 video scenes 39 security code See lock code sending contact cards, business cards 32 images 37 video clips 47 service commands 69 settings access codes 120 access points 118 Bluetooth connection 107 calendar 86 R1114_en.book Page 115 Friday, September 16, 2005 9:36 AM call barring 123 call diverting 122 certificates 121 configuring 10 cover display 124 data connections 117 date and time 120 display 116 headset 124 IM 98, 102 language 115 lock code 121 loopset 124 original settings 115 personalising the phone 15 PIN code 121 screen saver 116 UPIN code 121 UPUK code 121 shortcuts Web connection 88 SIM card copying names and numbers to phone 32 messages 79 names and numbers 32 sis file 126 SMS centre, short message service centre 80 snooze 11 software transferring a file to your device 126 sound clips 50 sounds muting a ringing tone 26 recording sounds 96 speed dialing 21 standby mode 15 synchronisation 112 T text message service centre adding new 80 text messages 73 themes 17 time 11 transferring content from another phone 17 U UPIN code 121 UPUK code 121 USB cable 110 USIM card see glossary explanation in the Quick Start Guide USSD commands 69 V video call 22 answering 26 rejecting 26 115 R1114_en.book Page 116 Friday, September 16, 2005 9:36 AM video clips 50 video player See RealOne Player Visual Radio 104 viewing content 105 visual service ID 105 voice commands 124 voice dialing 21 voice mailbox 20 changing the phone number 20 diverting calls to voice mailbox 122 voice messages 20 voice tags 124 volume control 12 making calls 21 during a call 20, 23 loudspeaker 12 W Web access points, see access points browser 88 116
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-10-26 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | ||
3 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2005-10-26
|
||||
1 2 3 | Applicant's complete, legal business name |
Microsoft Corporation
|
||||
1 2 3 | FCC Registration Number (FRN) |
0008260473
|
||||
1 2 3 | Physical Address |
1 Microsoft Way
|
||||
1 2 3 |
Redmond, Washington 98052
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
h******@atcb.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
OW3
|
||||
1 2 3 | Equipment Product Code |
RM-67
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
H****** S****
|
||||
1 2 3 | Title |
Director, EMC, SI and RF Compliance
|
||||
1 2 3 | Telephone Number |
425-7********
|
||||
1 2 3 | Fax Number |
425-7********
|
||||
1 2 3 |
h******@microsoft.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
Nokia GmbH
|
||||
1 2 3 | Name |
G****** P********
|
||||
1 2 3 | Physical Address |
Rensingstrasse 15
|
||||
1 2 3 |
Bochum, 44807
|
|||||
1 2 3 |
Germany
|
|||||
1 2 3 |
g******@nokia.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/10/2005 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 | PCE - PCS Licensed Transmitter held to ear | |||||
1 2 3 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | GSM 900/ 1800/ 1900/wcdma2100 PCS Phone with BT | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power Output listed is Conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains a GSM phone. | ||||
1 2 3 | Power Output is EIRP. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 2.2 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Head: 0.42 W/kg; Body-worn 0.36 W/kg. This device contains 900/1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations This device contains a Bluetooth transmitter | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
TCC Microsoft
|
||||
1 2 3 |
TCC Tampere
|
|||||
1 2 3 | Name |
J****** J******
|
||||
1 2 3 | Telephone Number |
358-7********
|
||||
1 2 3 |
35871********
|
|||||
1 2 3 | Fax Number |
358-7********
|
||||
1 2 3 |
358-7********
|
|||||
1 2 3 |
f******@microsoft.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0020000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 24E | BC | 1850.2 | 1909.8 | 1.318 | 0.02 ppm | 300KGXW | |||||||||||||||||||||||||||||||||
2 | 2 | 24E | BC | 1850.2 | 1909.8 | 0.457 | 0.02 ppm | 300KG7W | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC