all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Manual | Users Manual | 1.87 MiB | ||||
1 2 3 | External Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Attestation Statements |
1 2 3 | Manual | Users Manual | 1.87 MiB |
Nokia 6131/6133 User Guide DRAFT FCC Draft Issue 1 DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION, declares that this product RM-115 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. Copyright 2006 Nokia. All rights reserved. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia, Visual Radio, Nokia Connecting People, Xpress-on, XpressPrint, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation. US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2006. Tegic Communications, Inc. All rights reserved. 0434 DRAFT Java is a trademark of Sun Microsystems, Inc. This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. This Nokia device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment. DRAFT FCC Draft/Issue 1 Contents DRAFT For your safety.......................... 7 General information.............. 10 Overview of functions........................ 10 Access codes......................................... 10 Configuration settings service ........ 11 Download content .............................. 12 Nokia support....................................... 12 1. Get started ......................... 13 Install SIM card and battery ............ 13 Insert a microSD card ........................ 14 Remove the microSD card ................ 14 Charge the battery.............................. 14 Open and close the phone................ 15 Switch the phone on and off........... 15 Antenna ................................................. 16 Phone strap........................................... 16 2. Your phone......................... 17 Keys and parts...................................... 17 Standby mode ...................................... 18 Keypad lock (keyguard) ..................... 21 Functions without a SIM card......... 21 3. Call functions..................... 22 Make a call ........................................... 22 Answer or reject a call....................... 23 Options during a call.......................... 24 4. Write text........................... 25 Predictive text input .......................... 25 Traditional text input......................... 26 5. Navigate the menus .......... 27 6. Messaging .......................... 28 Text messages (SMS).......................... 28 SIM messages....................................... 29 Multimedia messages (MMS).......... 30 Memory full .......................................... 32 Folders.................................................... 32 Postcards ............................................... 33 Flash messages .................................... 34 Nokia Xpress audio messaging........ 34 E-mail application .............................. 35 Instant messaging............................... 38 Voice messages.................................... 43 Info messages ...................................... 43 Service commands.............................. 43 Delete messages.................................. 44 Message settings................................. 44 7. Contacts.............................. 48 Search for a contact .......................... 48 Save names and phone numbers.... 48 Save details........................................... 48 Copy or move contacts...................... 49 Edit contact details ............................ 49 Synchronize all .................................... 49 Delete contacts.................................... 49 My presence ......................................... 50 Subscribed names ............................... 51 Business cards...................................... 52 Settings.................................................. 52 Groups.................................................... 53 Speed dials............................................ 53 Info, service, and my numbers ........ 53 8. Call log................................ 54 Positioning information .................... 54 9. Settings ............................. 55 Profiles ................................................... 55 Themes ................................................... 55 Tones....................................................... 55 Main display ......................................... 56 Mini display .......................................... 57 Time and date ...................................... 57 4 DRAFT My shortcuts......................................... 58 Connectivity.......................................... 59 Call........................................................... 65 Phone ...................................................... 66 Enhancements...................................... 66 Configuration........................................ 67 Security .................................................. 68 Phone software updates.................... 69 Restore factory settings..................... 70 10. Operator menu ................ 70 11. Gallery.............................. 71 Print images.......................................... 71 Memory card......................................... 71 12. Media ............................... 73 Camera ................................................... 73 Media player ......................................... 74 Music player.......................................... 75 Radio ....................................................... 76 Voice recorder....................................... 78 Equalizer................................................. 78 Stereo widening................................... 79 13. Organizer.......................... 80 Alarm clock............................................ 80 Calendar ................................................. 80 To-do list................................................ 81 Notes....................................................... 82 Calculator .............................................. 82 Countdown timer ................................ 83 Stopwatch ............................................. 83 14. Push to talk ..................... 84 Push to talk channels......................... 84 Switch PTT on and off ........................ 86 Make and receive a PTT call ............. 86 Callback requests................................. 88 Add a one-to-one contact................ 89 PTT settings ........................................... 89 Configuration settings ....................... 90 Web ......................................................... 90 15. Applications ..................... 91 Launch a game..................................... 91 Launch an application........................ 91 Some application options ................. 91 Download an application .................. 92 Presenter ................................................ 92 16. SIM services ..................... 94 17. Web................................... 95 Set up browsing................................... 95 Connect to a service........................... 95 Browse pages........................................ 96 Bookmarks ............................................. 97 Appearance settings ........................... 97 Security settings .................................. 98 Download settings .............................. 99 Service inbox ........................................ 99 Cache memory................................... 100 Browser security ............................... 100 18. PC connectivity............. 102 Nokia PC Suite................................... 102 EGPRS, HSCSD, and CSD................. 102 Data communication applications 102 19. Battery information...... 103 Charging and discharging.............. 103 Nokia battery authentication ....... 104 20. Technical Information .. 106 Care and maintenance ........ 107 Additional safety information.......................... 108 APPENDIX ............................ 112 Index..................................... 121 5 C o n t e n t s DRAFT 6 For your safety F o r y o u r s a f e t y Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the phone off near medical equipment. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. INTERFERENCE All wireless phones may be susceptible to interference, which could affect performance. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. DRAFT SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft. SWITCH OFF WHEN REFUELLING Do not use the phone at a refuelling point. Do not use near fuel or chemicals. SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the phone where blasting is in progress. USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. 7 F o r y o u r s a f e t y WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so. DRAFT About your device The wireless device described in this guide is approved for use on the EGSM 850, 900, 1800 and 1900 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect the privacy and legitimate rights of others. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. Network services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger. 8 F o r y o u r s a f e t y device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as multimedia messaging (MMS), browsing, e-mail application, instant messaging, presence enhanced contacts, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies. Shared memory The following features in this device may share memory: gallery, contacts, text messages, multimedia messages, and instant messages, e-mail, calendar, to-do notes, JavaTM games and applications, and note application. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features. DRAFT Enhancements A few practical rules about accessories and enhancements Keep all accessories and enhancements out of the reach of small children.
When you disconnect the power cord of any accessory or enhancement, grasp
Check regularly that enhancements installed in a vehicle are mounted and and pull the plug, not the cord. are operating properly.
Installation of any complex car enhancements must be made by qualified personnel only. 9 G e n e r a l i n f o r m a t i o n General information phone. See Insert a microSD card, p. 14 and Memory card, p. 71.
Push to talk. See Push to talk, p. 84.
A microSD memory card to extend the memory capacity of the Overview of functions Your phone provides many functions that are practical for daily use, such as a text and multimedia messaging, a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera. Your phone also supports the following functions:
Plug and play online service to get the configuration settings. See Plug and play service,p. 16, and Configuration settings service, p. 11. DRAFT
Active standby. See Active standby, p. 18.
Audio messaging. See Nokia Xpress audio messaging, p. 34.
Instant messaging. See Instant messaging, p. 38.
E-mail application. See E-mail application, p. 35.
Enhanced voice dialing. See Enhanced voice dialing, p. 22 and
Presence-enhanced contacts. See My presence, p. 50.
Java 2 Platform, Micro Edition (J2METM). See Applications, p. 91. Access codes Voice commands, p. 59. Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see Security, p. 68. 10 G e n e r a l i n f o r m a t i o n DRAFT PIN codes The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See Security, p. 68. The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions. The module PIN is required to access the information in the security module. See Security module, p. 100. The signing PIN is required for the digital signature. See Digital signature, p. 101. PUK codes The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your local service provider for the codes. Barring password The barring password (4 digits) is required when using the Call barring service. See Security, p. 68. Configuration settings service To use some of the network services, such as mobile Internet services, MMS, Nokia Xpress audio messaging, or remote Internet server synchronization, your phone needs the correct configuration settings. You may be able to receive the settings directly as a configuration message. After receiving the settings you need to save them on your phone. The service provider may provide a PIN that is needed to save the settings. For more information on availability, contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia Web site, www.nokia.com/support. When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration settings received is displayed. 11 G e n e r a l i n f o r m a t i o n To save the settings, select Show > Save. If the phone requests Enter settings' PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code, contact the service provider that supplies the settings. If no settings are saved yet, these settings are saved and set as default configuration settings. Otherwise, the phone asks Activate saved configuration settings?. To discard the received settings, select Exit or Show > Discard. Download content You may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions. You may also be able to download updates of phone software (network service). See Phone, p. 66, Phone updates. For the availability of different services, pricing, and tariffs, contact your service provider. DRAFT Nokia support Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product. On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia Care contact centers at www.nokia.com/customerservice. For maintenance services, check your nearest Nokia service center at www.nokia.com/repair. Important: Use only services that you trust and that offer adequate security and protection against harmful software. 12 1. Get started G e t s t a r t e d Install SIM card and battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with BL-4C battery. Always use original Nokia batteries. See Nokia battery authentication, p. 104. The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card. DRAFT To remove the back cover of the phone, press sightly (1) and slide the cover (2). Remove the battery as shown (3). Open the SIM card holder (4). and insert the SIM card properly into the holder (5). Close the SIM card holder (6). Replace the battery (7). Slide the back cover into its place (8, 9). 13 G e t s t a r t e d Insert a microSD card Keep all microSD memory cards out of the reach of small children. 1. Remove the back cover of the phone. Insert the card into the microSD card 2. slot with the golden contact surface facing down, and press it until it locks into place. 3. Close the back cover of the phone. Use only compatible microSD cards with this device. Other memory cards, such as Reduced Size MultiMedia cards, do not fit in the microSD card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted. Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device. DRAFT You can remove or replace the microSD card during phone operation without switching the phone off. 1. Make sure that no application is currently accessing the micro SD Important: Do not remove the microSD card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. Remove the microSD card memory card. 2. Remove the back cover of the phone. 3. Press the microSD card slightly in to release the locking. 4. Remove the microSD card from the slot. Charge the battery Check the model number of any charger before use with this device. This device is intended for use when supplied with power from an AC-3 or AC-4 charger. 14 G e t s t a r t e d Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. on the bottom of your phone. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 1. Connect the charger to a wall socket. 2. Connect the lead from the charger to the socket DRAFT If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. The charging time depends on the charger used. Charging a BL-4C battery with the AC-3 charger takes approximately 2 hours and 20 minutes while the phone is in the standby mode. Open and close the phone To open the phone press the fold release button (1). The fold opens automatically (2). To close the phone turn the fold manually in its closed position. To switch off a tone that sounds when you open and close the phone, see Tones, p. 55. Switch the phone on and off Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. To switch the phone on or off, press and hold the power key. See Keys and parts, p. 17. If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****), and select OK. 15 G e t s t a r t e d Set the time, time zone, and date Enter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See Time and date, p. 57. Antenna Your device has an internal antenna. Plug and play service When you switch on your phone for the first time, and the phone is in the standby mode, you are asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Connect to serv. support," p. 68, and Configuration settings service, p. 11. DRAFT Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life. Phone strap Thread the strap through the eyelet of the phone as shown in the picture and tighten it. 16 2. Your phone Keys and parts 1 Earpiece 2 Main display 3 Left and right selection keys 4 Middle selection key 5 Call key 6 Keypad 7 Infrared window 8 Fold release button 9 4-way navigation key 10 End key 11 Loudspeaker 12 Phone strap eyelet 13 Pop-PortTM connector flap 14 Charger connector 15 Camera lens 16 Volume keys (Volume up = PTT key) 17 Mini display 18 Camera key 19 Power key DRAFT Connector flap To connect enhancements, open the Pop-PortTM connector flap. Y o u r p h o n e 17 Y o u r p h o n e Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. or a shortcut to another function. See Left selection key,p. 58. Main display 1 Signal strength of the cellular network 2 Battery charge status 3 Indicators 4 Name of the network or the operator logo 5 Clock 6 Main screen 7 Function of the left selection key is Go to DRAFT 8 Function of the middle selection key is Menu 9 Function of the right selection key is Names or Active standby In the active standby mode there is a list of selected phone features and information on the screen that you can directly access in the standby mode. To switch on the mode, select Menu > Settings > Main display >
Standby mode settings >Active standby > My active standby. In the standby mode, scroll up or down to activate the navigation in the list. To start the feature, select Select; or to display the information, select View. Left and right arrows at the beginning and end of a line indicate that further information is available by scrolling left or right. To end the active standby navigation mode, select Exit. a shortcut to another function. See Right selection key, p. 58. Operator variants may have an operator-specific name to access an operator-specific Web site. 18 Y o u r p h o n e To organize and change the active standby mode, activate the navigation mode, and select Options > Active standby > My active standby > Options and the following options:
Personalise Assign or change phone features in the standby mode. Organise Move the position of features in the standby mode. Enabling active standby Select keys to activate the standby navigation mode. To change the settings, see Standby mode settings, p. 56. To switch off the active standby mode select Options > Active standby > Off; or select Menu > Settings > Main display > Standby mode settings >Active standby > Off. DRAFT
To open the web browser, press and hold 0.
To call your voice mailbox, press and hold 1.
Use the navigation key as a shortcut. See My shortcuts, p. 58.
Press the camera key to start the camera (still photo).
In camera mode press the volume keys to zoom in or out.
Press a volume key to mute the ringing tone of an incoming call Shortcuts in the standby mode
To access the list of dialed numbers, press the call key once. Scroll to the number or name that you want; and to call the number, press the call key.
Press the power key to access the profiles menu on the main display. when the phone is closed. Indicators You have unread messages in the Inbox folder. You have unsent, canceled or failed messages in the Outbox folder. The phone registered a missed call. 19 Y o u r p h o n e
, Your phone is connected to the instant messaging service, and the availability status is online or offline. You received one or several instant messages, and you are connected to the instant messaging service. The phone does not ring for an incoming call or text message. The phone is registered to the GPRS or EGPRS network. The keypad is locked. The alarm clock is set to On. The countdown timer is running. A GPRS or EGPRS connection is established. The stopwatch is running in the background. DRAFT All incoming calls are diverted to another number. A Bluetooth connection is active. The GPRS or EGPRS connection is suspended (on hold), for example, if there is an incoming or outgoing call during an EGPRS dial-up connection. Push to talk connection is active or suspended. See Push to talk, p. 84. The loudspeaker is activated, or the music stand is connected to the phone. If you have two phone lines, the second phone line is selected.
,
,
,
, Calls are limited to a closed user group. The timed profile is selected.
,
, or
, A headset, hands-free, loopset, or music stand enhancement is connected to the phone. 20 Y o u r p h o n e Keypad lock (keyguard) To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad. To unlock the keypad, select Unlock, and press * within 1.5 seconds. If the Security keyguard is set On, enter the security code if requested. To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks. For Security keyguard, see Phone, p. 66. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. DRAFT Functions without a SIM card Several functions of your phone may be used without installing a SIM card (for example the data transfer with a compatible PC or another compatible device). Note that when you use the phone without a SIM card, some functions appear dimmed in the menus and cannot be used. Synchronizing with a remote Internet server is not possible without a SIM card. For an emergency call, some networks may require that a valid SIM card is properly inserted in the device. 21 C a l l f u n c t i o n s 3. Call functions Make a call 1. Enter the phone number, including the area code. close the phone. 2. To call the number, press the call key. 3. To end the call or to cancel the call attempt, press the end key, or For international calls, press * twice for the international prefix (the
+ character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number. To search for a name or phone number that you have saved in Contacts, see Search for a contact, p. 48. Press the call key to call the number. To access the list of dialled numbers, press the call key once in the standby mode. To call the number, select a number or name, and press the call key. DRAFT the call begins. See Speed dialling in Call, p. 65. Speed dialing Assign a phone number to one of the speed-dialing keys, 2 to 9. See Speed dials, p. 53. Call the number in either of the following ways:
Press a speed-dialing key, then the call key.
If Speed dialling is set to On, press and hold a speed-dialing key until Enhanced voice dialing You can make a phone call by saying the name that is saved in the contact list of the phone. A voice command is added automatically to all entries in the contact list of the phone. If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing. 22 C a l l f u n c t i o n s Voice commands are language-dependent. To set the language, see Voice playback language in Phone, p. 66. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1. 2. Say the voice command clearly. If the voice recognition was In the standby mode, press and hold the right selection key or press and hold the volume down key. A short tone is played, and Speak now is displayed. If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing. successful, a list with matches is shown. The phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials the number; or if the result is not the correct one, scroll to another entry, and select to dial the entry. Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in My shortcuts, p. 58. DRAFT Answer or reject a call To answer an incoming call, press the call key, or open the phone. To end the call, press the end key or close the phone. To reject an incoming call if the phone is open, press the end key. To reject an incoming call when the phone is closed, press and hold a volume key. To mute the ringing tone, press a volume key when the phone is closed, or select Silence when the phone is open. Tip: If the Divert if busy function is activated to divert the calls
(for example, to your voice mailbox), rejecting an incoming call also diverts the call. See Call, p. 65. If a compatible headset supplied with the headset key is connected to the phone, to answer and end a call, press the headset key. 23 C a l l f u n c t i o n s Call waiting To answer the waiting call during an active call, press the call key. The first call is put on hold. To end the active call, press the end key. To activate the Call waiting function, see Call, p. 65. Options during a call Many of the options that you can use during a call are network services. For availability, contact your service provider. During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Loudspeaker or Handset. Network services options are Answer or Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the following:
Send DTMF to send tone strings Swap to switch between the active call and the call on hold Transfer to connect a call on hold to an active call and disconnect yourself Conference to make a conference call that allows up to five persons to take part in a conference call Private call to discuss privately in a conference call DRAFT Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. 24 4. Write text W r i t e t e x t Predictive text input To set predictive text input on, select Options > Prediction on. indicates traditional text indicates predictive text input. Predictive text input allows You can enter text (for example, when writing messages) using traditional or predictive text input. When you write text, text input indicators appear at the top of the display. input. you to write text quickly using the phone keypad and a built-in dictionary. You can enter a letter with a single keypress. predictive text input with Word suggestions. The phone predicts and completes the word before you enter all the characters. indicates the character case. To change the character case, press #. appears next to the text input indicator, indicating indicates number mode. To change from the letter to number mode, press and hold #, and select Number mode. To set the writing language while writing text, select Options > Writing language.
,
, or DRAFT 1. Start writing a word using the 2 to 9 keys. Press each key only once for one letter. The entered letters are displayed underlined. To insert a special character, press and hold *, or select Options >
Insert symbol. Scroll to a character, and select Use. To write compounds words, enter the first part of the word; to confirm it, press the navigation key right. Write the next part of the word and confirm the word. To enter a full stop, press 1. 2. When you finish writing the word and it is correct, to confirm it, press 0 to add space. 25 Tip: To quickly set predictive text input on or off when writing text, press # twice, or select and hold Options. W r i t e t e x t If the word is not correct, press * repeatedly, or select Options >
Matches. When the word that you want appears, select the word and press the navigation key. If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Complete the word (traditional text input is used), and select Save. Traditional text input To set traditional text input on, select Options > Prediction off. Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters available depend on the selected writing language. If the next letter you want is located on the same key as the present one, wait until the cursor appears, or briefly press any of the navigation keys and enter the letter. The most common punctuation marks and special characters are available under the 1 key. For more characters, press *. DRAFT 26 5. Navigate the menus N a v i g a t e t h e m e n u s The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. 2. Scroll through the menu, and select an option (for example, Settings). If the selected menu contains further submenus, select the one that you want (for example, Call). If the selected menu contains further submenus, repeat step 3. To change the menu view, select Options > Main menu view > List, Grid, Grid with labels, or Tab. To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done >
Yes. DRAFT 4. 5. Select the setting of your choice. 6. To return to the previous menu level, select Back. To exit the menu, select Exit. 3. 27 M e s s a g i n g 6. Messaging You can read, write, send, and save text, multimedia, e-mail, audio, and flash messages and postcards. All messages are organized into folders. Text messages (SMS) With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service). Before you can send any text or SMS e-mail message, you must save your message center number. See Message settings, p. 44. To check SMS e-mail service availability and to subscribe to the service, contact your service provider. To save an e-mail address in Contacts, see Save details, p. 48. Your device supports the sending of text messages beyond the character limit for a single message. Longer messages will be sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message. The message length indicator at the top of the display shows the total number of characters left and the number of messages needed for sending. For example, 673/2 means that there are 673 characters left and that the message will be sent as a series of two messages. DRAFT Write and send a SMS message 1. Select Menu > Messaging > Create message > Text message. 2. Enter the recipients phone number or e-mail address in the To: field. To retrieve a phone number or e-mail address from Contacts, select Add > Contact. To send the message to multiple recipients, add the desired contacts one by one. To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently 28 used. To retrieve contacts from previously incoming calls, select Add > Open Log. M e s s a g i n g To read the message later, select Menu > Messaging > Inbox. If more than one message is received, select the message you want to read. 3. For a SMS e-mail, enter a subject in the Subject: field. 4. Write your message in the Message: field. See Write text, p. 25. To insert a template into the message, select Options > Use template. To see how the message will look to the recipient, select Options >
Preview. 5. To send the message, select Send. See Message sending, p. 31. Read and reply to an SMS message When you have received a message, 1 message received or the number of new messages with messages received are shown. 1. To view a new message, select Show. To view it later, select Exit. DRAFT Flash message, or Audio message. To send a text message to an e-mail address, enter the e-mail address in the To: field. Scroll down, and write your message in the Message: field. See Write text, p. 25. If you want to change the message type for your reply message, select Options > Change message type. 3. To reply to a message, select Reply > Text message, Multimedia, 2. To view the list of available options while reading a message, select is shown if you have unread messages in Inbox. Options. 4. To send the message, select Send. See Message sending, p. 31. SIM messages SIM messages are text messages that are saved to your SIM card. You can copy or move those messages to the phone memory, but not vice versa. Received messages are saved to the phone memory. To read SIM messages, select Menu > Messaging > Options > SIM messages. 29 M e s s a g i n g Multimedia messages (MMS) Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. To check availability and to subscribe to the multimedia messaging network service, contact your service provider. See Multimedia messages, p. 45. A multimedia message can contain text, sound, images, video clips, a business card, and a calendar note. If the message is too large, the phone may not be able to receive it. Some networks allow text messages that include an Internet address where you can view the multimedia message. You cannot receive multimedia messages during a call or an active browsing session over GSM data. Because delivery of multimedia messages can fail for various reasons, do not rely solely upon them for essential communications. DRAFT Write and send a MMS message The wireless network may limit the size of MMS messages. If the inserted image exceeds this limit, the device may make it smaller so that it can be sent by MMS. 1. Select Menu > Messaging > Create message > Multimedia. 2. Enter your message. Your phone supports multimedia messages that contain several pages (slides). A message can contain a calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide. To insert a file in the message, select Insert; or select Options >
Insert. 3. To view the message before sending it, select Options > Preview. 4. To send the message, select Send. See Message sending, p. 31. 5. Enter the recipients phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact. To send the 30 M e s s a g i n g message to multiple recipients, add the desired contacts one by one. To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used. Note: When the phone is sending the message, the animated is shown. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider. Message sending Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. When you finish writing your message, to send the message, select Send. The phone saves the message in the Outbox folder, and the sending starts. If you select Save sent messages > Yes, the sent message is saved in the Sent items folder. See General settings, p. 44. DRAFT It takes more time to send a multimedia message than to send a text message. While the message is being sent, you can use other functions on the phone. If an interruption occurs while the message is being sent, the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You can try to resend it later. Cancel message sending To cancel the sending of the messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending. Read and reply to a MMS message Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. When you receive a new multimedia message, Multimedia message received or the number of new messages with messages received is shown. 31 M e s s a g i n g 1. To read the message, select Show. To view it later, select Exit. To read the message later, select Menu > Messaging > Inbox. Scroll to the message that you want to view, and select it. is shown if you have unread messages in Inbox. 2. To view the whole message if the received message contains a 4. To send the message, select Send. See Message sending, p. 31. 3. To reply to the message, select Options > Reply > Text message, presentation, select Play. To view the files in the presentation or the attachments, select Options > Objects or Attachments. Multimedia, Postcard, Flash message, or Audio message. Write the reply message. If you want to change the message type for your reply message, select Options > Change message type. The new message type may not support all the content that you have added. DRAFT Memory full When you receive a message, and the memory for the messages is full, Memory full. Unable to receive messages. is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If more messages are to be deleted, select Mark. Mark all the messages you want to delete, and select Options > Delete marked. Folders The phone saves received messages in the Inbox folder. Messages that have not yet been sent are saved in the Outbox folder. To set the phone to save the sent messages in the Sent items folder, see Save sent messages in General settings, p. 44. To save the message that you write and want to send later in the Drafts folder, select Options > Save message > Drafts 32 M e s s a g i n g You can move your messages to the Saved items folder. To organize your Saved items subfolders, select Menu > Messaging > Saved items. To add a folder, select Options > Add folder. To delete or rename a folder, scroll to the desired folder, and select Options > Delete folder or Rename folder. Your phone has templates. To create a new template, save a message as a template. To access the template list, select Menu > Messaging >
Saved items > Templates. Postcards With the postcard messaging service (network service), create and send postcards that may contain an image and a greeting text. The postcard is sent to the service provider using multimedia messaging. The service provider prints the postcard and sends it to the postal address given with the message. Multimedia messaging service must be activated before this service can be used. Before you can use the postcard service you must subscribe to the service. To check the availability, and costs, and to subscribe to the service, contact your network operator or service provider. DRAFT Send a postcard Select Menu > Messaging > Create message > Postcard. Scroll to the editor fields, enter the name, the postal address, and the city of the recipient (mandatory editor fields, marked by a *). Scroll to the image field and select Insert > Open Gallery to insert an image from Gallery or New image to insert a recent photo; then write your greeting text. Select Options to see the options available. To send the postcard, select the graphical key or Options > Send. 33 M e s s a g i n g Flash messages Flash messages are text messages that are instantly displayed upon reception. Flash messages are not automatically saved. Write a flash message Select Menu > Messaging > Create message > Flash message. Enter the recipients phone number in the To: field. Scroll down, and write your message in the Message: field. The maximum length of a flash message is 70 characters. To insert a blinking text into the message, select Options > Insert blink character to set a marker. The text behind the marker blinks until a second marker is inserted. Receive a flash message A received flash message is indicated with Message: and a few words from the beginning of the message. To read the message, select Read. To extract phone numbers, e-mail addresses, and Web site addresses from the current message, select Options > Use detail. To save the message, select Save and the folder in which you want to save it. DRAFT Nokia Xpress audio messaging You can use the multimedia message service to create and send a audio message in a convenient way. Multimedia messaging service must be activated before you can use audio messages. Create an audio message 1. Select Menu > Messaging > Create message > Audio message. The recorder opens. To use the recorder, see Voice recorder, p. 78. 2. Speak your message. 3. Enter the recipients phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact. To send the message to multiple recipients, add the desired contacts one by one. To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used. 4. To send the message, select Send. 34 M e s s a g i n g Receive an audio message When your phone receives an audio message, 1 audio message received is displayed. To open the message, select Play; or if more than one message is received, select Show > Play. To listen to the message later, select Exit. To see the available options, select Options. E-mail application The e-mail application uses a packet data connection (network service) to allow you to access your e-mail account from your phone when you are not in the office or at home. This e-mail application is different from the SMS e-mail function. To use the e-mail function on your phone, you need a compatible e-mail system. You can write, send, and read e-mail with your phone. You can also save and delete the e-mail on a compatible PC. Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and retrieve any e-mail messages, you must do the following:
Obtain a new e-mail account or use your current account. To check the availability of your e-mail account, contact your e-mail service provider. DRAFT service provider. You may receive the e-mail configuration settings as a configuration message. See Configuration settings service, p. 11. You can also enter the settings manually. See Configuration, p. 67. To activate the e-mail settings, select Menu > Messaging > Message settings > E-mail messages. See E-mail messages, p. 46.
Check your e-mail settings with your network operator or e-mail This application does not support keypad tones. Setting Wizard The setting wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings manually, select Menu >
Messaging > E-mail > Options > Manage accounts > Options > New. 35 M e s s a g i n g The Manage accounts options allow you to add, delete, and change the e-mail settings. Make sure that you have defined the correct preferred access point for your operator. See Configuration, p. 67. The e-mail application requires an Internet access point without a proxy. WAP access points normally include a proxy and do not work with the e-mail application. If more than one e-mail account is defined, select the account from which you want to send the e-mail. 3. Enter the recipients e-mail address. 4. Write a subject for the e-mail. 5. Write the e-mail message. See Write text, p. 25. Write and send an e-mail You can write your e-mail message before connecting to the e-mail service; or connect to the service first, then write and send your e-mail. 1. Select Menu > Messaging > E-mail > Write new e-mail. 2. DRAFT To save the e-mail in the Outbox folder to be sent later, select Send > Send later. To edit or continue writing your e-mail later, select Options > Save as draft. The e-mail is saved in Outboxes > Drafts. To send the e-mail later, select Menu > Messaging > E-mail >
Options > Send now or Send and check for e-mail. To attach a file to the e-mail, select Options > Attach file and a file from Gallery. 6. To send the e-mail message immediately, select Send > Send now. Download e-mail 1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check for new e-mail. If more than one e-mail account is defined, select the account from which you want to download the e-mail. The e-mail application only downloads e-mail headers at first. 36 M e s s a g i n g 2. Select Back. 3. Select Inboxes, the account name, and the new message, and select Retrieve to download the complete e-mail message. To download new e-mail messages and to send e-mail that has been saved in the Outbox folder, select Options > Send and check for e-mail options. and the desired message. Read and reply to e-mail 2. While reading the message, select Options to view the available 1. Select Menu > Messaging > E-mail > Inboxes, the account name, 3. To reply to an e-mail, select Reply > Original text or Empty message. To reply to many, select Options > Reply to all. Confirm or edit the e-mail address and subject, then write your reply. Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. DRAFT E-mail folders Your phone saves e-mail that you have downloaded from your e-mail account in the Inboxes folder. The Inboxes folder contains the following folders: Account name for incoming e-mail, Archive for archiving e-mail, Custom 1Custom 3 for sorting e-mail, Junk where all spam e-
mail is stored, Drafts for saving unfinished e-mail, Outbox for saving e-mail that has not been sent, and Sent items for saving e-mail that has been sent. To manage the folders and their e-mail content, select Options to view the available options of each folder. 4. To send the message, select Send > Send now. Spam filter The e-mail application allows you to activate a built-in spam filter. To activate and define this filter, select Options > Spam filter > Settings in 37 M e s s a g i n g the main e-mail idle screen. The spam filter allows the user to put specific senders on a black or white list. Black list sender messages are filtered to the Junk folder. Unknown and White list sender messages are downloaded into the account inbox. To blacklist a sender, select the e-
mail message in the Inboxes folder and Options > Blacklist sender. Instant messaging You can take text messaging to the next level by experiencing instant messaging (IM) (network service) in a wireless environment. You can engage in instant messaging with friends and family, regardless of the mobile system or platform (like the Internet) they are using, as long as you all use the same instant messaging service. Before you can start using instant messaging, you must first subscribe to your wireless service providers text messaging service and register with the instant messaging service you want to use. You must also obtain a user name and password before you can use instant messaging. See Register with an instant messaging service, p. 38 for more information. DRAFT To set the required settings for the instant messaging service, see Connection settings in Access, p. 39. The icons and texts on the display may vary, depending on the instant messaging service. While you are connected to the instant messaging service, you can use the other functions of the phone, and the instant messaging conversation remains active in the background. Depending on the network, the active instant messaging conversation may consume the phone battery faster, and you may need to connect the phone to a charger. Note: Depending on both your IM service provider and your wireless service provider, you may not have access to all of the features described in this guide. Register with an instant messaging service You can do this by registering over the Internet with the IM service provider you have selected to use. During the registration process, you 38 M e s s a g i n g will have the opportunity to create the user name and password of your choice. For more information about signing up for instant messaging services, contact your wireless service provider. Access To access the Instant messages menu while still offline, select Menu >
Messaging > Instant messages (Instant messages may be replaced by another term depending on the service provider). If more than one set of connection settings for instant messaging service is available, select the one you want. If there is only one set defined, it is selected automatically. The following options are shown:
Login to connect to the instant messaging service. To set the phone to automatically connect to the instant messaging service when you switch on the phone; in the login session, scroll to Automatic login: and select Change >On, or select Menu > Messaging > Instant messages, connect to the instant messaging service, and select Options >
Settings > Automatic login > On. Saved conversations to view, erase, or rename the conversations that you saved during an instant messaging session Connection settings to edit the settings needed for messaging and presence connection DRAFT Connect To connect to the instant messaging service, access the Instant messages menu, select the instant messaging service, if needed, and select Login. When the phone has successfully connected, Logged in is displayed. To disconnect from the instant messaging service, select Options >
Logout. 39 M e s s a g i n g indicates a new group message. indicates a read group message. indicates a new instant message. indicates a read instant message. indicates an invitation. Sessions When connected to the instant messaging service your status as seen by others is shown in a status line: My status: Online, My status: Busy or Status: Appear offline to change own status, select Change. Below the status line there are three folders containing your contacts and showing their status: Conversations, Online and Offline. To expand the folder highlight it and select Expand (or press scroll right), to collapse the folder select Collapse (or press scroll left). Conversations shows the list of new and read instant messages or invitations to instant messaging during the active instant messaging session. DRAFT The icons and texts on the display may vary, depending on the instant messaging service you have selected. Online shows the number of contacts that are online. Offline shows the number of contacts that are offline To start a conversation, expand the Online or the Offline folder and scroll to the contact with whom you would like to chat and select Chat. To answer an invitation or to reply to a message expand the Conversations folder and scroll to the contact to whom you would like to chat and select Open. To add contacts, see Add IM contacts, p. 42. Groups > Public groups (not visible if groups are not supported by the network) the list of bookmarks to public groups provided by the service provider is displayed. To start a instant messaging session with a group, scroll to a group, and select Join. Enter the screen name that you want to use as your nickname in the conversation. When you have successfully joined the group conversation, you can start a group conversation. You can create a private group. See Groups, p. 42. 40 M e s s a g i n g DRAFT Search > Users or Groups to search for other instant messaging users or public groups on the network by phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a member in the group, or by group name, topic, or ID. Options > Chat or Join group to start the conversation when you have found the user or the group that you want. Accept or reject an invitation In the standby mode, when you are connected to the instant messaging service and you receive a new invitation, New invitation received is displayed. To read it, select Read. If more than one invitation is received, scroll to the invitation you want, and select Open. To join the private group conversation, select Accept, and enter the screen name you want to use as your nickname. To reject or delete the invitation, select Options > Reject or Delete. Read an instant message In the standby mode, when you are connected to the instant messaging service, and you receive a new message that is not a message associated with an active conversation, New instant message is displayed.To read it, select Read. If you receive more than one message, N new instant messages appears in the display, where N is the number of new messages. Select Read, scroll to a message, and select Open. New messages received during an active conversation are held in Instant messages > Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed. To save a new contact that is not in the phone memory, select Options > Save contact. Participate in a conversation To join or start an IM session, write your message; and select Send, or press the call key. Select Options to view the available options. If you receive a new message during a conversation from a person who is not taking part in the current conversation, is displayed, and the phone sounds an alert tone. 41 M e s s a g i n g Write your message; and select Send, or press the call key. Your message is displayed, and the reply message is displayed below your message. Add IM contacts When connected to the IM service, in the IM main menu select Options > Add contact. Select By mobile number, Enter ID manually, Search from server, or Copy from server (depending on service provider). When the contact is successfully added, the phone confirms it. Scroll to a contact. To start a conversation, select Chat. Block or unblock messages When you are in a conversation and want to block messages, select Options > Block contact. A confirmation query is shown, select OK to block messages from this contact. To block messages from a specific contact in your contacts list, scroll to the contact in Conversations, Online or Offline and select Options >
Block contact > OK. To unblock a contact, in the IM main menu select Options > Blocked list. Scroll to the contact you want to unblock and select Unblock > OK. DRAFT Groups You can create your own private groups for an IM conversation, or use the public groups provided by the service provider. The private groups exist only during an IM conversation, and the groups are saved on the server of the service provider. If the server you are logged into does not support group services, all group-related menus are dimmed. Public You can bookmark public groups that your service provider may maintain. Connect to the IM service, and select Groups > Public groups. Scroll to a group with which you want to chat, and select Join. If you are not in the group, enter your screen name as your nickname for the 42 M e s s a g i n g group. To delete a group from your group list, select Options > Delete group. To search for a group, select Groups > Public groups > Search groups. You can search for a group by a member in the group, by group name, topic, or ID. Private Connect to the IM service, and from the main menu select Options >
Create group. Enter the name for the group and the screen name that you want to use as your nickname. Mark the private group members in the contacts list, and write an invitation. Voice messages The voice mailbox is a network service and you may need to subscribe to it. For more information and for your voice mailbox number, contact your service provider. To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages. To enter, search for, or edit your voice mailbox number, select Voice mailbox number. If supported by the network, your voice mailbox number, select Listen. DRAFT Info messages With Info messages (network service), you can receive messages on various topics from your service provider. To check availability, topics, and the relevant topic numbers, contact your service provider. indicates new voice messages. To call Service commands Select Menu > Messaging > Service commands. Write and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider. 43 M e s s a g i n g Delete messages To delete messages, select Menu > Messaging > Delete messages > By message to delete single messages, By folder to delete all messages from a folder, or All messages. If a folder contains unread messages, the phone asks whether you want to delete them also. Message settings General settings General settings are common for text and multimedia messages. Select Menu > Messaging > Message settings > General settings and from the following options:
Save sent messages > Yes to set the phone to save the sent messages in the Sent items folder Overwriting in Sent items > Allowed to set the phone to overwrite the old sent messages with the new ones when the message memory is full. This setting is shown only if you set Save sent messages > Yes. Font size to select the font size used in messages Graphical smileys > Yes to set the phone to replace character-based smileys with graphical ones DRAFT Text messages The text message settings affect the sending, receiving, and viewing of text and SMS e-mail messages. Select Menu > Messaging > Message settings > Text messages and from the following options:
Delivery reports > Yes to ask the network to send delivery reports about your messages (network service) Message centres > Add centre to set the phone number and name of the message center that is required for sending text messages. You receive this number from your service provider. Message centre in use to select the message center in use 44 M e s s a g i n g E-mail message centres > Add centre to set the phone numbers and name of the e-mail center for sending SMS e-mails. E-mail centre in use to select the SMS e-mail message center in use Message validity to select the length of time for which the network attempts to deliver your message Messages sent via to select the format of the messages to be sent:
Text, Paging, or Fax (network service) Use packet data > Yes to set GPRS as the preferred SMS bearer Character support > Full to select all characters in the messages to be sent as viewed. If you select Reduced, characters with accents and other marks may be converted to other characters. When writing a message, you can preview it to see how the message will look to the recipient. See Write and send a SMS message, p. 28. Reply via same centre > Yes to allow the recipient of your message to send you a reply using your message center (network service) DRAFT Multimedia messages The message settings affect the sending, receiving, and viewing of multimedia messages. You may receive the configuration settings for multimedia messaging as a configuration message. See Configuration settings service, p. 11. You can also enter the settings manually. See Configuration, p. 67. Select Menu > Messaging > Message settings > Multimedia messages and from the following options:
Delivery reports > Yes to ask the network to send delivery reports about your messages (network service) Image size (multimedia) to set the image size in multimedia messages. Before sending, images will be reduced to the selected size. Default slide timing to define the default time between slides in multimedia messages Allow multimedia recept. to receive or block the multimedia message, select Yes or No. If you select In home network, you cannot receive multimedia messages when outside your home network. The default 45 M e s s a g i n g setting of the multimedia message service is generally In home network. The availability of this menu depends on your phone. Incoming multim. msgs. to allow the reception of multimedia messages automatically, manually after being prompted, or to reject the reception. This setting is not shown if Allow multimedia recept. is set to No. Allow adverts to receive or reject advertisements. This setting is not shown if Allow multimedia recept. is set to No, or Incoming multim. msgs. is set to Reject. Configuration settings > Configuration only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal configuration for multimedia messaging. Select Account and a multimedia messaging service account contained in the active configuration settings. DRAFT E-mail messages The settings affect the sending, receiving, and viewing of e-mail. You may receive the configuration settings for the e-mail application as a configuration message. See Configuration settings service, p. 11. You can also enter the settings manually. See Configuration, p. 67. To activate the settings for the e-mail application, select Menu >
Messaging > Message settings > E-mail messages and from the following options:
Configuration to select the set that you want to activate Account to select an account provided by the service provider My name to enter your name or nickname E-mail address to enter your e-mail address Include signature to define a signature that is automatically added to the end of your e-mail when you write your message Reply-to address to enter the e-mail address to which you want the replies to be sent SMTP user name to enter the name that you want to use for outgoing mail 46 M e s s a g i n g SMTP password to enter the password that you want to use for outgoing mail Display terminal window > Yes to perform manual user authentication for intranet connections Incoming server type > POP3 or IMAP4 to select the type of e-mail system that you are using. If both types are supported, select IMAP4 Incoming mail settings to select available options for POP3 or IMAP4 DRAFT 47 C o n t a c t s 7. Contacts Search for a contact Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the first characters of the name you are searching for. You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image for a limited number of contacts. The SIM card memory can save names with one phone number attached to them. The contacts saved in the SIM card memory are indicated by
. DRAFT Save names and phone numbers Names and numbers are saved in the used memory. To save a name and phone number, select Menu > Contacts > Names > Options > Add new contact. Enter the last name, first name, the phone number and select Save. Save details In the phone memory for contacts you can save different types of phone numbers, and short text items per name. You can also select a tone or a video clip for a contact. The first number you save is automatically set as the default number, and it is indicated with a frame around the number type indicator (for example,
). When you select a name from contacts (for example, to make a call), the default number is used unless you select another number. 1. Make sure that the memory in use is Phone or Phone and SIM. See Settings, p. 52. 48 C o n t a c t s 2. Search for the contact to which you want to add a detail, and select Details > Options > Add detail. Select from the options available. To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. See My presence, p. 50. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. Enter the ID, and select OK to save it. Copy or move contacts To copy names and phone numbers from the phone contact memory to the SIM card memory, or vice versa, select Menu > Contacts > Names >
Options > Copy. Select One by one to copy single contacts or All to copy all contacts. The SIM card memory can save names with one phone number attached to them. To copy or move all contacts from the phone contact memory to the SIM card memory, or vice versa, select Menu > Contacts > Copy contacts or Move contacts. DRAFT Edit contact details Search for the contact you want to edit, and select Details. To edit a name, number, text item, or to change the image, select Options > Edit. To change the number type, scroll to the desired number, and select Options > Change type. To set the selected number as the default number, select Set as default. You cannot edit an ID when it is on the IM contacts or Subscribed names list. Synchronize all Synchronize your calendar, contacts data, and notes with a remote Internet server (network service). For details see Synchronize from a server, p. 64. Delete contacts To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Delete all 49 C o n t a c t s contacts > From phone memory or From SIM card. Confirm with the security code. To delete a contact, search for the desired contact, and select Options >
Delete contact. To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete and from the options available. Deleting an image or video clip from contacts does not delete it from Gallery. DRAFT My presence With the presence service (network service), you can share your presence status with other users with compatible devices and access to the service, such as your family, friends, and colleagues. Presence status includes your availability, status message, and personal logo. Other users who have access to the service and who request your information are able to see your status. The requested information is shown in Subscribed names in the viewers Contacts menu. You can personalize the information that you want to share with others and control who can see your status. Before you can use presence, you must subscribe to the service. To check the availability and costs, and to subscribe to the service, contact your network operator or service provider, from whom you also receive your unique ID, password, and the settings for the service. See Configuration, p. 67. While you are connected to the presence service, you can use the other functions of the phone, and the presence service is active in the background. If you disconnect from the service, your presence status is shown for a certain amount of time to viewers, depending on the service provider. Select Menu > Contacts > My presence and from the following options:
Connect to 'My presence' or Disconnect from service to connect to or disconnect from the service View my presence > Private presence or Public presence to view your presence status 50 C o n t a c t s Edit my presence > My availability, My presence message, My presence logo, or Show to to change your presence status My viewers > Current viewers, Private list, or Blocked list to view the persons who are subscribed to or blocked from your presence information Settings > Show pres. in standby, Connection type, or Presence settings Subscribed names You can create a list of contacts whose presence status information you want to be aware of. You can view the information if it is allowed by the contacts and the network. To view these subscribed names, scroll through the contacts, or use the Subscribed names menu. Ensure that the memory in use is Phone or Phone and SIM. See Settings, page 52. To connect to the presence service, select Menu > Contacts > My presence > Connect to 'My presence'. DRAFT connected to the presence service, the phone asks if you want to connect now. If you have no contacts on your list, select Add. Otherwise, select Options > Subscribe new. Your list of contacts is shown. Add contacts to the subscribed names 1. Select Menu > Contacts > Subscribed names. If you have not contact is added to the subscribed names list. If there is more than one ID, select one of them. After subscription to the contact, Subscription activated is shown. 3. Select a contact from the list. If the contact has a saved ID, the 2. Tip: To subscribe to a contact from the Contacts list, search for the contact you want, and select Details > Options > Request presence > As subscription. If you only want to view the presence information but not to subscribe to a contact, select Request presence > One time only. 51 C o n t a c t s View the subscribed names To view the presence information, see also Search for a contact, p. 48. 1. Select Menu > Contacts > Subscribed names.
,
, or others, or not available. indicates that the person is available, not visible to indicates that the persons presence information is not available. 2. Select Options > View details to view the details of the selected The status information of the first contact on the subscribed names list is displayed. The information that the person wants to make available to others may include text and an icon. contact or Options > Subscribe new, Send message, Send business card, or Unsubscribe. Unsubscribe a contact To unsubscribe a contact from the Contacts list, select the contact and Options > Unsubscribe > OK. To unsubscribe from the Subscribed names menu, see View the subscribed names, p. 52. DRAFT Business cards You can send and receive a persons contact information from a compatible device that supports the vCard standard as a business card. To send a business card, search for the contact whose information you want to send, and select Details > Options > Send business card > Via multimedia, Via text message, via infrared, or Via Bluetooth. When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes. Settings Select Menu > Contacts > Settings and from the following options:
Memory in use to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall names and number from both 52 C o n t a c t s memories. In that case, when you save names and numbers, they are saved in the phone memory. Contacts view to select how the names and numbers in Contacts are displayed Name display to select whether the contacts first or last name is displayed first Font size to set the font size for the list of contacts Memory status to view the free and used memory capacity Groups Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images. DRAFT Speed dials To assign a number to a speed-dialing key, select Menu > Contacts >
Speed dials, and scroll to the speed-dialing number that you want. Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. See also Speed dialling in Call, p. 65. To make a call using the speed-dialing keys, see Speed dialing, p. 22. Info, service, and my numbers Select Menu > Contacts and from one of these submenus:
Info numbers to call the information numbers of your service provider if the numbers are included on your SIM card (network service) Service numbers to call the service numbers of your service provider if the numbers are included on your SIM card (network service) My numbers to view the phone numbers assigned to your SIM card, if the numbers are included on your SIM card 53 C a l l l o g 8. Call log The phone registers your missed, received, and dialed calls if the network supports it and the phone is switched on and within the network service area. To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients. To view the approximate information on your recent communications, select Menu > Log > Call duration, Packet data counter, or Packet data timer. To view how many text and multimedia messages you have sent and received, select Menu > Log > Message log. DRAFT Positioning information The network may send you a location request. You can ensure that the network will deliver location information of your phone only if you approve it (network service). Contact your service provider to subscribe and to agree upon the delivery of location information. To accept or reject the location request, select Accept or Reject. If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your network operator or service provider. The phone displays 1 missed position request. To view the missed location request, select Show. To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all. Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. Some timers may be reset during service or software upgrades. 54 9. Settings S e t t i n g s Profiles Your phone has various setting groups called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles, the desired profile and from the following options:
Activate to activate the selected profile Personalise to personalize the profile. Select the setting you want to change, and make the changes. Timed to set the profile to be active until a certain time up to 24 hours, and set the end time. When the time set for the profile expires, the previous profile that was not timed becomes active. DRAFT Themes A theme contains many elements for personalizing your phone, such as wallpaper, screen saver, color scheme, and a ringing tone. Select Menu > Settings > Themes and from the following options:
Select theme to set a theme in your phone. A list of folders in Gallery opens. Open the Themes folder, and select a theme. Theme downloads to open a list of links to download more themes Tones You can change the tone settings of the selected active profile. Select Menu > Settings > Tones. You can find the same settings in the Profiles menu. See Personalise in Profiles, p. 55. To set the phone to ring only for calls from phone numbers that belong to a selected caller group, select Alert for. Scroll to the caller group you want or All calls, and select Mark. Select Options > Save to save the settings or Cancel to leave the settings unchanged. 55 S e t t i n g s If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds. A theme may contain a tone that sounds when you open and close the phone. To switch off the tone, change the setting in Other tones:. Please note that this setting also switches off the warning tones. Main display Select Menu > Settings > Main display and from the available options. DRAFT Standby mode settings Select Standby mode settings and from the following options:
Active standby to switch the active standby mode on or off and to organize and personalize the active standby mode. See Active standby, p. 18. Wallpaper to add the background image to the display in the standby mode Fold animation to set your phone to display an animation when you open and close the phone Standby font colour to select the color for the texts on the display in the standby mode Navigation key icons to display the icons of the current navigation key shortcuts in the standby mode when active standby is off Operator logo to set your phone to display or hide the operator logo. The menu is dimmed, if you have not saved the operator logo. For more information on availability of an operator logo, contact your network operator. Cell info display > On to display the cell identity, if available from the network Screensaver Select Screen saver and from the following options:
On to activate the screen saver for the main display 56 S e t t i n g s Mini display Select Menu > Settings > Mini display. You can change the settings for Wallpaper, Screen saver, and Fold animation. Screen savers > Image to choose an image or a graphic from the Gallery Screen savers > Slide set and a folder in the Gallery to use the images in the folder as a slide set Screen savers > Video clip and a video clip from the Gallery to run a video clip as screensaver (only on the main display) Screen savers > Open camera to take a new photo as screensaver Screen savers > Analogue clock or Digital clock to use a clock as screensaver Graphic downloads to download more images for the screen saver Time-out to set the time after which the screen saver is activated DRAFT Time and date To change the time, time zone, and date settings, select Menu >
Settings > Time and date > Clock, Date, or Auto-update of date/time
(network service). When traveling to a different time zone, select Menu > Settings > Time and date > Clock > Time zone and the time zone of your location in terms of the time difference with respect to Greenwich Mean Time
(GMT) or Universal Time Coordinated (UTC). The time and date are set according to the time zone and enable your phone to display the correct sending time of received text or multimedia messages. For example, GMT -5 denotes the time zone for New York (USA), 5 hours west of Greenwich/London (UK). 57 S e t t i n g s My shortcuts With personal shortcuts you get quick access to often used functions of the phone. Left selection key To select a function from the list for the left selection key, select Menu > Settings > My shortcuts > Left selection key. See also Standby mode, p. 18. If the left selection key is Go to to activate a function, in the standby mode, select Go to > Options and from the following options:
Select options to add a function to the shortcut list or to remove one. Scroll to the function, and select Mark or Unmark. Organise to rearrange the functions on your personal shortcut list. Scroll to the function you want to move, and select Move. Scroll to where you want to move the function, and select OK. DRAFT Shortcut bar To choose and reorder applications shown by the shortcut bar in the active standby mode, select Menu > Settings > My shortcuts > Shortcut bar. Select Select links, and mark the desired application in the list or in a folder. Select Done > Yes to confirm the selection. Select Organise links to reorder the applications in the shortcut bar. Select an application, Move, and move it to an other position. Select OK to confirm. Select Done > Yes to save the shortcut sequence. Right selection key To select a function from the list for the right selection key, select Menu > Settings > My shortcuts > Right selection key. See also Standby mode, p. 18. 58 S e t t i n g s Navigation key To select shortcut functions for the navigation keys, select Menu >
Settings > My shortcuts > Navigation key. Scroll to the desired key, and select Change and a function from the list. To remove a shortcut function from the key, select (empty). To reassign a function for the key, select Assign. See Shortcuts in the standby mode, p. 19. Voice commands To call contacts and carry out phone functions, say the voice commands. Voice commands are language-dependent. To set the language, see Voice playback language in Phone, p. 66. To select the phone functions to activate with a voice commands, select Menu > Settings > My shortcuts > Voice commands and a folder. Scroll indicates that the voice tag is activated. To activate to a function. the voice tag, select Add. To play the activated voice command, select Play. To use voice commands, see Enhanced voice dialing, p. 22. To manage the voice commands, scroll to a phone function, and select from the following options:
Edit or Remove to change or deactivate the voice command of the selected function Add all or Remove all to activate or deactivate voice commands to all functions in the voice commands list DRAFT Connectivity You can connect the phone to a compatible device using a Bluetooth wireless technology or a USB data cable connection. You can also define the settings for EGPRS dial-up connections. Bluetooth wireless technology This device is compliant with Bluetooth Specification 2.0 + EDR supporting the following profiles: generic access, generic object exchange, hands-free, headset, object push, file transfer, dial-up networking, SIM access, and serial port. To ensure interoperability between other devices supporting Bluetooth technology, 59 S e t t i n g s DRAFT use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. Features using Bluetooth technology or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life. Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth technology communicate using radio waves, your phone and the other devices do not need to be in direct line-of-sight, although the connection can be subject to interference from obstructions such as walls or from other electronic devices. Set up a Bluetooth connection Select Menu > Settings > Connectivity > Bluetooth and from the following options:
Bluetooth > On or Off to activate or deactivate the Bluetooth function. Search for audio enhanc. to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone. Paired devices to search for any Bluetooth device in range. Select New to list any Bluetooth device in range. Scroll to a device, and select Pair. Enter an agreed Bluetooth passcode of the device (up to 16 characters) to associate (pair) the device to your phone. You must only give this passcode when you connect to the device for the first time. Your phone connects to the device, and you can start data transfer. Bluetooth wireless connection Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth connection is currently active, select Active devices. To view a list of Bluetooth devices that are currently paired with the phone, select Paired devices. Select Options to access available options depending on the status of the device and the Bluetooth connection. indicates that Bluetooth is activated. 60 S e t t i n g s Bluetooth settings To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility or My phone's name. If you are concerned about security, turn off the Bluetooth function, or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others with whom you agree. DRAFT Infrared You can set up the phone to send and receive data through its infrared
(IR) port. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant. You can send or receive data to or from a compatible phone or data device (for example, a computer) through the IR port of your phone. Do not point the IR (infrared) beam at anyone's eyes or allow it to interfere with other IR devices. Infrared devices are Class 1 laser products. When sending or receiving data, ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices. To activate the IR port of your phone to receive data using IR, select Menu > Settings > Connectivity > Infrared. To deactivate the IR connection, select Menu > Settings >
Connectivity > Infrared. When the phone displays Deactivate infrared?, select Yes. If data transfer is not started within 2 minutes after the activation of the IR port, the connection is cancelled and must be started again. IR connection indicator When your phone is ready to send or receive data through its IR port. When a connection has been lost. is shown continuously, the IR connection is activated, and blinks, your phone is trying to connect to the other device, or 61 S e t t i n g s DRAFT Packet data (GPRS) General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an Internet protocol
(IP)-based network. It enables wireless access to data networks such as the Internet. The applications that may use packet data are MMS, video streaming, browsing sessions, e-mail, Push to talk, remote SyncML, Java application downloading, and the PC dial-up. To define how to use the service, select Menu > Settings >
Connectivity > Packet data > Packet data connection and from the following options:
When needed to set the packet data connection to established when an application needs it. The connection will be closed when the application is terminated. Always online to set the phone to automatically connect to a packet data network when you switch the phone on. indicates that the GPRS or EGPRS service is available. If you receive a call or a text message or make a call during a packet data connection, or indicates that the GPRS or EGPRS connection is suspended (on hold). Modem settings You can connect the phone using Bluetooth wireless technology or USB data cable connection to a compatible PC and use the phone as a modem to enable EGPRS connectivity from the PC. To define the settings for EGPRS connections from your PC, select Menu > Settings > Connectivity > Packet data > Packet data settings >
Active access point, and activate the access point you want to use. Select Edit active access point > Alias for access point, enter a name to change the access point settings, and select OK. Select Packet data access point, enter the access point name (APN) to establish a connection to an EGPRS network, and select OK. You can also set the EGPRS dial-up service settings (access point name) on your PC using the Nokia Modem Options software. See Nokia PC Suite, p. 102. If you have set the settings both on your PC and on your phone, the PC settings are used. or 62 S e t t i n g s Data transfer Synchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service). Your phone allows data transfer with a compatible PC or another compatible device when using the phone without a SIM card. Note that when you use the phone without a SIM card, some functions appear dimmed in the menus and cannot be used. Synchronizing with a remote Internet server is not possible without a SIM card. Transfer contact list To copy or synchronize data from your phone, the name of the device and the settings must be in the list of transfer contacts. If you receive data from another device (for example, a compatible mobile phone), the corresponding transfer contact is automatically added to the list, using the contact data from the other device. Server synchronisation and PC synchronisation are the original items in the list. To add a new transfer contact to the list (for example a mobile phone), select Menu > Settings > Connectivity > Data transfer > Options > Add transfer contact > Phone synchronisation or Phone copy, and enter the settings according to the transfer type. To edit the copy and synchronize settings, select a contact from the transfer contact list and Options > Edit. DRAFT Note: Every individual device must have its own entry in the transfer contact list. Using one transfer contact for several devices is not possible. To delete a transfer contact, select it from the transfer contact list, select Options > Delete, and confirm Delete transfer contact?. You cannot delete Server synchronisation or PC synchronisation. Data transfer with a compatible device For synchronization, Bluetooth wireless technology or a cable connection is used. The other device is in the standby mode. To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer contact from the list, other than Server 63 S e t t i n g s synchronisation or PC synchronisation. According to the settings, the selected data is copied or synchronized. The other device also must be activated for receiving data. Synchronize from a compatible PC Before you synchronize data from calendar, notes, and contacts from a compatible PC, you must install the Nokia PC Suite software of your phone on the PC. Use Bluetooth wireless technology or a USB data cable for the synchronization, and start the synchronization from the PC. Synchronize from a server To use a remote Internet server, you must subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. See Configuration settings service, p. 11 and Configuration, p. 67. If you have saved data on the remote Internet server, to synchronize your phone, start the synchronization from your phone. Select Menu > Settings > Connectivity > Data transfer > Server synchronisation. Depending on the settings, select Initialising synchronisation or Initialising copy. Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete, if the contacts or calendar are full. DRAFT USB data cable You can use the USB data cable to transfer data between the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite. To activate the phone for data transfer or image printing, connect the data cable; when the phone displays USB data cable connected. Select mode., select OK. Select from the following modes:
Default mode to use the cable for PC Suite Printing to print images directly from the phone using a compatible printer 64 S e t t i n g s To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Default mode, Printing, or Data storage. Call Select Menu > Settings > Call and from the following options:
Call divert to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See Call barring service in Security, p. 68. Anykey answer > On to answer an incoming call by briefly pressing any key, except the power key, the camera key, the left and right selection keys, or the end key Answ. when fold opened > On to answer an incoming call by opening the fold Automatic redial > On to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt Speed dialling > On to dial the names and phone numbers assigned to the speed-dialing keys 2 to 9 by pressing and holding the corresponding number key Call waiting > Activate to have the network notify you of an incoming call while you have a call in progress (network service). See Call waiting, p. 24. Summary after call > On to briefly display the approximate duration and cost (network service) of the call after each call Send my caller ID > Yes to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network. Line for outgoing calls to select the phone line 1 or 2 for making calls if supported by your SIM card (network service). DRAFT 65 S e t t i n g s Phone Select Menu > Settings > Phone and from the following options:
Language settings to set the display language of your phone, select Phone language. If you select Automatic, the phone selects the language according to the information on the SIM card. To select the USIM card language, select SIM language. To set a language for the voice playback, select Voice playback language. See Enhanced voice dialing, p. 22 and Voice commands in My shortcuts, p. 58. Security keyguard to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. Welcome note to write the note you would like to be shown briefly when the phone is switched on Flight query > On the phone asks every time when it is switched on whether the flight profile shall be used. With flight profile all radio connections are switched off. The flight profile should be used in areas sensitive to radio emissions. Phone updates to receive phone software updates from your service provider (network service). This option may not be available, depending on your phone. See Phone software updates, p. 69. Operator selection > Automatic to set the phone to automatically select one of the cellular networks available in your area. With Manual you can select a network that has a roaming agreement with your service provider. Confirm SIM serv. actions See SIM services, p. 94. Help text activation to select whether the phone shows help texts Start-up tone > On the phone plays a tone when it is switched on DRAFT Enhancements This menu or the following options are shown only if the phone is or has been connected to a compatible mobile enhancement. 66 S e t t i n g s Select Menu > Settings > Enhancements. Select an enhancement, and depending on the enhancement, from the following options:
Default profile to select the profile that you want to be automatically activated when you connect to the selected enhancement Automatic answer to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off. Lights to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a key press. Text phone > Use text phone > Yes to use the text phone settings instead of headset or loopset settings If your phone is provided with a hearing aid coil select Hearing aid >
T-coil hearing aid mode > On to optimise the sound quality when using icon is shown when the T-coil hearing aid a t-coil hearing aid. The mode is active. DRAFT Configuration You can configure your phone with settings that are required for certain services to function correctly. The services are multimedia messaging, IM, synchronization, e-mail application, streaming, and browser. Your service provider may also send you these settings. See Configuration settings service, p. 11. Select Menu > Settings > Configuration and from the following options:
Default config. settings to view the service providers saved in the phone. Scroll to a service provider, and select Details to view the applications that the configuration settings of this service provider support. To set the configuration settings of the service provider as default settings, select Options > Set as default. To delete configuration settings, select Delete. Activ. default in all apps. to activate the default configuration settings for supported applications 67 S e t t i n g s DRAFT Preferred access point to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number. Connect to serv. support to download the configuration settings from your service provider Device manager settings to allow or prevent the phone from receiving phone software updates. This option may not be available, depending on your phone. See Phone software updates, p. 69. Personal config. settings to add new personal accounts for various services manually, and to activate or delete them. To add a new personal account if you have not added any, select Add; otherwise, select Options > Add new. Select the service type, and select and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate. Security When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialling) calls still may be possible to the official emergency number programmed into your device. Select Menu > Settings > Security and from the following options:
PIN code request and UPIN code request to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off. PIN2 code request to select whether the PIN2 code is required when using a specific phone feature which is protected by the PIN2 code. Some SIM cards do not allow the code request to be turned off. Call barring service to restrict incoming calls to and outgoing calls from your phone (network service). A barring password is required. Fixed dialling to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card Closed user group to specify a group of people whom you can call and who can call you (network service) 68 S e t t i n g s Security level > Phone to set the phone to ask for the security code whenever a new SIM card is inserted into the phone. If you select Memory, the phone asks for the security code when the SIM card memory is selected, and you want to change the memory in use. Access codes to change the security code, PIN code, UPIN code, PIN2 code, or barring password Code in use to select whether the PIN code or UPIN code should be active Authority certificates or User certificates to view the list of the authority or user certificates downloaded into your phone. See Certificates, p. 100. Security module settings to view Security module details, activate Module PIN request, or change the module PIN and signing PIN. See also Access codes, p. 10. DRAFT Phone software updates Your service provider may send phone software updates over the air directly to your device. This option may not be available, depending on your phone. Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the update is completed and the device is restarted. Be sure to backup data before accepting a software update. Settings To allowed or disallow phone software updates, select Menu >
Settings > Configuration > Device manager settings >
Service prov. sw updates and following options:
Always allow to perform all software downloads and updates automatically Confirm first to perform software downloads and updates only after your confirmation (default setting) Always reject to reject all software updates 69 O p e r a t o r m e n u Depending on your settings you will be notified that a software update is available for download or has been downloaded and installed automatically. Request a software update Select Menu > Settings > Phone > Phone updates to request available phone software updates from your service provider. Select Current software details to display the current software version and check whether an update is needed. Select Download phone softw. to download and install a phone software update. Follow the instructions on the display. Install a software update Select Install software update to start the installation, when the installation was cancelled after the download. The software update may take several minutes. If there are problems with the installation, contact your service provider. DRAFT Restore factory settings To reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett.. Enter the security code. The names and phone numbers saved in Contacts are not deleted. 10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information contact your network operator. If this menu is not shown the following menu numbers change accordingly. The operator can update this menu with a service message. For more information, see Service inbox, p. 99. 70 11. Gallery G a l l e r y In this menu you can manage images, video clips, music files, themes, graphics, tones, recordings, and received files. These files are stored in the phone memory or a attached microSD memory card and may be arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. To see the list of folders, select Menu > Gallery. To see the available options of a folder, select a folder > Options. To view the list of files in a folder, select a folder > Open. To see the available options of a file, select a file > Options. DRAFT Print images Your device supports Nokia XPressPrint. To connect it to a compatible printer use a data cable or send the image via Bluetooth to a printer supporting Bluetooth technology. See Connectivity, p. 59. You can print images that are in the JPEG format. The images taken with the camera are automatically saved in the JPEG format. Select the image you want to print and Options > Print. Memory card Keep all memory cards out of the reach of small children. You can use the microSD memory card to store your multimedia files such as video clips, music tracks, and sound files, photos, and messaging data, and to back up information from phone memory. Details of how you can use the memory card with other features and applications of your phone are given in the sections describing these features and applications. To insert and remove the microSD memory 71 G a l l e r y card see Insert a microSD card, p. 14 and Remove the microSD card, p. 14. The following options may can also be accessed from the Gallery. to 11 letters or numbers). Format the memory card When a memory card is formatted, all data on the card is permanently lost. Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it. 1. Select Menu > Applications and the memory card folder 2. Select Options > Format memory card. 3. Select Yes to confirm. 4. When formatting is complete, enter a name for the memory card (up DRAFT Lock the memory card To set a password to lock your memory card to help prevent unauthorized use, select Options > Set password. You are asked to enter and confirm your password. The password can be up to eight characters long. The password is stored in your phone and you do not have to enter it again while you are using the memory card on the same phone. If you want to use the memory card on another phone, you are asked for the password. Unlock a memory card If you insert another password-protected memory card into your phone, you are prompted to enter the password of the card. To unlock the card, select Options > Delete password. Once the password is removed, the memory card is unlocked and can be used on another phone without a password. Check memory consumption To check the memory consumption of different data groups and the available memory for installing new applications or software on your memory card, select Options > Details. 72 M e d i a 12. Media When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. Camera You can take photos or record video clips with the built-in camera. DRAFT Take a photo To start the camera, press the camera key in the standby mode, or select Menu > Media > Camera. To take an image in landscape format, hold the phone in a horizontal position. Press the navigation key left or right to change between camera (still image) and video mode. To zoom in and out in the camera mode, press the navigation key up and down, or the volume keys. To take a photo, select Capture, or press the camera key. The phone saves the photo in Gallery > Images. To take a self-portrait, close the fold and use the mini display as a view finder. Press the camera key. Select Options to set Night mode on if the lighting is dim, Self-timer on to activate the self-timer, Img. sequence on to take photos in a fast sequence. With the highest image size setting 3 photos are taken in a sequence, with other size settings 5 photos are taken. Select Options > Settings >Image preview time and a preview time to display the taken photo on the display. During the preview time, select Back to take another photo or Send to send the photo as a multimedia message. Your device supports an image capture resolution of 1280 x 960 pixels. The image resolution in these materials may appear different. 73 M e d i a Record a video clip To select the video mode, scroll left or right, or select Options > Video. To start the video recording, select Record. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips. Camera options To use a filter with the camera, select Options > Effects >False colours, Greyscale, Sepia, Negative, or Solarise. To change the camera settings, select Options > Settings. DRAFT Media player With the media player you can view, play, and download files, such as images, audio, video, and animated images. You can also view compatible streaming videos from a network server (network service). Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address, or Media downloads to select or download media. Select Menu > Media > Media player > FF/Rew interval to set the step width for fast forward or rewind. Configuration for a streaming service You may receive the configuration settings required for streaming as a configuration message from the service provider. See Configuration settings service, p. 11. You can also enter the settings manually. See Configuration, p. 67. To activate the settings, do the following:
1. Select Menu > Media > Media player > Streaming settings >
Configuration. Only the configurations that support streaming are shown. 2. Select a service provider, Default, or Personal configuration for streaming. 3. Select Account and a streaming service account contained in the active configuration settings. 74 M e d i a Playing the music tracks Warning! Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Music player Your phone includes a music player for listening to music tracks, recordings or other MP3 or AAC sound files that you have transferred to the phone with the Nokia Audio Manager application, which is part of Nokia PC Suite. See Nokia PC Suite, p. 102. Music files stored in a folder in the phone memory or in a folder of the multimedia card, will automatically be detected and added to the default track list. To open the music player, select Menu > Media > Music player. DRAFT When you open the Music player menu, the details of the first track on the default track list are shown. To play, select To adjust the volume level, use the volume keys on the side of the phone. To stop the playing, select
. To skip to the next track, select previous track, select To rewind the current track, select and hold current track, select and hold want. Settings for the music player In the Music player menu the following options may be available:
Track list View all the tracks available on the track list and play the desired track. To play a track, scroll to the desired track, and select Play. If you select Options, you can refresh the track list (for example, after adding new tracks to the list) and change the track list that is shown when you open the Music player menu if several track lists are available in the phone. You also my send a track to another phone. Release the key at the position you
. To skip to the beginning of the
. To fast forward the
. 75 M e d i a Play options Select Random to play the tracks on the track list in random order. Select Repeat to play the current track or the entire track list repeatedly. Select Music source to select a folder with music tracks. Media equaliser Select or define an equalizer setting. See Equalizer, p. 78. Loudspeaker/Headset Listen to the music player using the phone loudspeaker or headset. (Only if a headset is attached) Tip: When using a headset, press the headset key to skip to the next track. Web page to access a Web page associated with the currently played track. Dimmed if no Web page is available. Music downloads to connect to a browser service related to the current track. This function is only available when the address of the service is included in the track. DRAFT
, or Select Menu > Media > Radio. To use the graphical keys
, right to the desired key, and select it.
, Radio The FM radio depends on an antenna other than the wireless devices antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. on the display, scroll left or Save radio frequencies 1. To start the search, select and hold or frequency in 0.05 MHz steps, briefly press
. To change the radio or
. 2. To save a frequency to a memory location, 1 to 9, press and hold the corresponding number key. To save a frequency to a memory location 76 from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9. 3. Enter the name of the radio station. M e d i a or
, or press the headset key. To select a radio station, briefly Listen to the radio Select Menu > Media > Radio. To scroll to the desired frequency, select DRAFT press the corresponding number keys. To adjust the volume, press the volume keys. Select from the following options:
Switch off to turn off the radio Save station to save a new radio station Visual Radio to set whether the Visual Radio application is used
(network service). To check the availability and costs, contact your network operator or service provider. Some radio stations may send text or graphical information that you can view using the Visual Radio application. Visual Radio settings to select the options for Visual Radio. To set whether the application starts automatically when you turn on the radio, select Enable visual service > Automatically. To access a Web site with a list of radio stations, select Station directory. If available, their visual radio ID is shown. Stations to select the list of saved stations. To delete or rename a station, scroll to the desired station, and select Options > Delete station or Rename. Mono output or Stereo output to listen to the radio in monophonic sound or in stereo Loudspeaker or Headset to listen to the radio using the loudspeaker or headset. Keep the headset connected to the phone. The lead of the headset functions as the radio antenna. Set frequency to enter the frequency of the desired radio station You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted. 77 M e d i a When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio.
, on the display, scroll left or 2. To start the recording, select To use the graphical keys
, or right to the desired key, and select it. Record sound 1. Select Menu > Media > Voice recorder. Voice recorder You can record pieces of speech, sound, or an active call, and save them in Gallery. This is useful when recording a name and phone number to write down later. The recorder cannot be used when a data call or GPRS connection is active. To start the recording during a call, select Options > Record. While recording a call, all parties to the call hear a faint beeping sound. When recording a call, hold the phone in the normal position near to your ear. To pause the recording, select DRAFT Recordings. To listen to the latest recording, select Options > Play last recorded. To send the last recording, select Options > Send last recorded. To see the list of recordings in Gallery, select Options > Recordings list > Recordings. The recording is saved in Gallery >
3. To end the recording, select Equalizer You can control the sound quality when using the music player by amplifying or diminishing frequency bands. Select Menu > Media > Equaliser. To activate a set, scroll to one of the equalizer sets, and select Activate. To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed. 78 M e d i a Stereo widening Stereo widening enhances the audio output of the music player by enabling a wider stereo sound effect. To change the setting, select Menu > Media > Stereo widening. DRAFT 79 O r g a n i z e r 13. Organizer Alarm clock You can set the phone to alarm at a desired time. Select Menu >
Organiser > Alarm clock. To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set the radio as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone. The phone uses the last radio station you listened to as the alarm, and the alarm plays through the loudspeaker. If you remove the headset or switch off the phone, the default alarm tone replaces the radio. To set a snooze time-out, select Snooze time-out and the time. DRAFT Stop the alarm The phone sounds an alert tone, and flashes Alarm! and the current time on the display, even if the phone was switched off. To stop the alarm, select Stop. If you let the phone continue to sound the alarm for a minute or select Snooze, the alarm stops for the time you set in Snooze time-out, then resumes. If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. Calendar Select Menu > Organiser > Calendar. The current day is indicated by a frame. If there are any notes set for the day, the day is in bold type, and the beginning of the note is shown 80 O r g a n i z e r Call, the fields. Meeting, Birthday, Memo, or Make a calendar note Select Menu > Organiser > Calendar. Scroll to the date, and select Options > Make a note and one of the following note types:
below the calendar. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes. Other options for the day view may be to make a note; delete, edit, move, or repeat a note; copy a note to another day; send a note with Bluetooth technology; or send a note to the calendar of another compatible phone as a text message or multimedia message. In Settings you can set the date, time, time zone, date or time format, date separator, default view, or the first day of the week. In Auto-delete notes you can set the phone to delete old notes automatically after a specified time. DRAFT Note alarm The phone displays the note and if set, sounds a tone. With a call note on the display, to call the displayed number, press the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select Snooze. To stop the alarm without viewing the note, select Exit. To-do list To save a note for a task that you must do, select Menu > Organiser >
To-do list. To make a note if no note is added, select Add; otherwise, select Options > Add. Fill in the fields, and select Save. To view a note, scroll to it, and select View. While viewing a note, you can also select an option to edit the attributes. You can also select an option to delete the selected note and delete all the notes that you have marked as done. Reminder. Fill in 81 O r g a n i z e r You can sort the notes by priority or by deadline, send a note to another phone as a text message or a multimedia message, save a note as a calendar note, or access the calendar. Calculator The calculator in your phone provides basic arithmetic and trigonometric functions, calculates the square and the square root, the inverse of a number, and converts currency values. Notes To write and send notes, select Menu > Organiser > Notes. To make a note if no note is added, select Add; otherwise, select Options > Make a note. Write the note, and select Save. Other options include deleting and editing a note. While editing a note, you can also exit the text editor without saving the changes. You can send the note to compatible devices by Bluetooth wireless technology, text message, or a multimedia message. DRAFT Select Menu > Organiser > Calculator. When 0 is displayed on the screen, enter the first number in the calculation. Press # for a decimal point. Scroll to the desired operation or function or select it from the Options. Enter the second number. Repeat this sequence as many times as it is necessary. To start a new calculation, first select and hold Clear. To perform a currency conversion, select Menu > Organiser >
Calculator. To save the exchange rate, select Options > Exchange rate. Select either of the displayed options. Enter the exchange rate, press #
for a decimal point, and select OK. The exchange rate remains in the memory until you replace it with another one. To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign. Note: This calculator has limited accuracy and is designed for simple calculations. Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared. 82 O r g a n i z e r Countdown timer Select Menu > Organiser > Countdown timer. Enter the alarm time in hours, minutes, and seconds, and select OK. If you wish, write your own note text that is displayed when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer. If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text if it is set or Countdown time up. To stop the alarm, press any key. If no key is pressed, the alarm automatically stops within 60 seconds. To stop the alarm and delete the note text, select Exit. To restart the countdown timer, select Restart. DRAFT Stopwatch You can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key. Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Select Menu > Organiser > Stopwatch and from the following options:
Split timing to take intermediate times. To start the time observation, select Start. Select Split every time that you want to take an intermediate time. To stop the time observation, select Stop. To save the measured time, select Save. To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset. Lap timing to take lap times Continue to view the timing that you have set in the background Show last to view the most recently measured time if the stopwatch is not reset View times or Delete times to view or delete the saved times 83 P u s h t o t a l k 14. Push to talk Select Menu > Push to talk. Push to talk (PTT) over cellular is a two-way radio service available over a GPRS cellular network (network service). You can use PTT to have a conversation with one person or with a group of people (channel) having compatible devices. While you are connected to the PTT service, you can use the other functions of the phone. To check availability and costs, and to subscribe to the service, contact your network operator. Roaming services may be more limited than for normal calls. Before you can use the PTT service, you must define the required PTT service settings. See PTT settings, p. 89 and Configuration settings, p. 90. DRAFT Push to talk channels A PTT channel comprises a group of people (for example, friends or a workteam) who joined the channel after they where invited to. When you call a channel, all members joined to the channel hear the call simultaneously. There are different types of PTT channels:
Public channel Every channel member can invite other persons. Private channel Only persons which receive an invitation by the channel creator can join in. Provisioned channel A permanent channel is created by the service provider. You can set the status of each channel to Active or Inactive. The number of active channels and the number of members per channel is limited. Contact your service provider for details. 84 P u s h t o t a l k Create a channel To add a channel, select Menu > Push to talk > Add channel and enter the settings in the form fields:
Channel name: Enter a name for the new channel. Channel status: Select Active to set the channel active, or Inactive to disable the channel. Nickname in channel: Enter your nick name to be shown the new channel. Channel security: > Public channel or Private channel Image: Select Change and an image from the Gallery or the Default graphic to set a graphic for the new channel. To send an invitation to the channel, select Yes when the phone requests it. The recipient of the invitation is added to the member list of the channel when the invitation is accepted. To send further invitations select Menu > Push to talk > Channel list, a channel, and Options >
Send invitation. To send the invitation use a text message or IR. To add a provisioned channel, select Menu > Push to talk > Add channel > Options > Edit address manually. Enter the Channel address:
provided by your service provider. DRAFT Receive an invitation 1. When you receive a text message invitation to a channel, Channel 2. To view the nickname of the person who sent the invitation and the channel address if the channel is not a private channel, select View. invitation received: is displayed. 3. To add the channel to your phone, select Save. 4. To set the status for the channel, select Active or Inactive. To reject the invitation, select Exit > Yes, or select View > Discard > Yes. 85 P u s h t o t a l k indicates the PTT Make and receive a PTT call Switch PTT on and off To connect to the PTT service, select Menu > Push to talk > Switch PTT on, or press and hold the PTT (volume up) key. connection. indicates that the service is temporarily unavailable. If you have added channels to the phone, you are automatically joined to the active channels. You may assign a default function to the PTT (volume up) key to open the channel list, the contacts list or a single channel or contact. See PTT settings, p. 89. To disconnect from the PTT service, select Switch PTT off. DRAFT To make a channel call, a one-to-one call, or a call to multiple recipients, you must hold the PTT (volume up) key as long as you talk. To listen to the response, release the PTT (volume up) key. Talking is allowed on a first-come, first-served basis. When you stop talking, the first person to press and hold the PTT key can talk next. You may be able to check the login status of your contacts in Menu >
Push to talk > Contacts list. This service depends on your network operator and is only available for subscribed contacts. To subscribe a contact, select Options >Subscribe contact, or if one or more contacts are already marked Subscribe marked. or indicates that the person wants not to be disturbed, but can receive Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. indicate that the person is either available or unknown. callback requests. on. indicates that the person has PTT not switched Make a channel call To make a call to a channel, select Channel list in the PTT menu, scroll to the desired channel, and press and hold the PTT (volume up) key. A tone indicates that the access is granted, and the phone displays your nickname and channel name. 86 P u s h t o t a l k Make a one-to-one call To start a one-to-one call from the list of contacts to which you have added the PTT address, select Contacts > Names or Menu > Push to talk > Contacts list. Scroll to a contact, and press and hold the PTT
(volume up) key. To start a one-to-one call from the list of PTT channels, select Channel list, scroll to the desired channel, and select Members. Scroll to the desired contact, and press and hold the PTT (volume up) key. To start a one-to-one call from the list of callback requests you have received, select Callback inbox. Scroll to the desired nickname, and press and hold the PTT (volume up) key. Make a PTT call to multiple recipients You can select multiple PTT contacts from the contact list. The recipients receive an incoming call and need to accept the call in order to participate. If supported by your network operator, you also may select contacts with a phone number but without PTT number. For details, contact your network operator. 1. Select Menu > Push to talk > Contacts list, and mark the desired DRAFT participating contacts are shown on the display, as soon as they join the call. 3. Press and hold the PTT (volume up) key to talk to them. Release the 2. Press and hold the PTT (volume up) key to start the call. The PTT (volume up) key to hear the response. 4. Press the end key to terminate the call. contacts. Receive a PTT call A short tone notifies you of an incoming PTT call. Informations, such as the channel, the phone number, or the nickname (network service) of the caller are displayed. You can either accept or reject an incoming one-to-one call if you have set the phone to first notify you of the one-to-one calls. 87 P u s h t o t a l k When you press and hold the PTT (volume up) key while the caller is talking, you hear a queuing tone, and Queuing is displayed. Press and hold the PTT (volume up) key, and wait for the other person to finish;
then you can talk immediately. Callback requests If you make a one-to-one call and do not get a response, you can send a request for the person to call you back. DRAFT Send a callback request You can send a callback request in the following ways:
To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options >
Send callback. To send a callback request from Contacts, search for the desired contact, and select Details. Scroll to the PTT address, and select Options > Send callback. To send a callback request from the channel list in the PTT menu, select Channel list, and scroll to the desired channel. Select Members, scroll to the desired contact, and select Options > Send callback. To send a callback request from the callback request list in the Push to talk menu, select Callback inbox. Scroll to a contact, and select Options > Send callback. Respond to a callback request When someone sends you a callback request, Callback request received is displayed in the standby mode. To open the Callback inbox, select View. The list of nicknames of the persons who have sent you callback requests is shown. To make a one-to-one call, select the desired request and press and hold the PTT (volume up) key. To send a call request back to the sender, select Options > Send callback. 88 P u s h t o t a l k To delete the request, select Delete. To save a new contact or to add the PTT address to a contact from a received callback request, select Options > Save as or Add to contact. Add a one-to-one contact You can save the names of persons to whom you often make one-to-one calls in the following ways:
To add a PTT address to a name in Contacts, search for the desired contact, select Details > Options > Add detail > Push to talk address. A contact will only appear in the PTT contact list, if the PTT address is entered. To add a contact to the PTT contacts list, select Menu > Push to talk >
Contacts list > Options > Add contact. To add a contact from the channel list, connect to the PTT service, select Channel list, and scroll to the desired channel. Select Members, scroll to the member whose contact information you want to save, and select Options. To add a new contact, select Save as. To add a PTT address to a name in Contacts, select Add to contact. DRAFT PTT settings Select Menu >Push to talk > Push to talk settings. 1 to 1 calls > On to select the phone to allow the reception of incoming one-to-one calls. To make but not receive one-to-one calls, select Off. The service provider may offer some services that override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify. PTT key default function to set the PTT (volume up) key to following functions: Open contact list, Open channel list, Call contact or group. Select a contact, a group, or Call PTT channel and select a channel. When you press and hold the PTT (volume up) key, the selected function will be performed. Show my login status to enable or disable the sending of the login status 89 P u s h t o t a l k PTT status in startup > Yes or Ask first to set the phone to automatically connect to the PTT service when you switch the phone on Push to talk when abroad to switch the PTT service on or off when the phone is used outside of the home network Send my PTT address > No to hide your PTT address from channel and one-to-one calls Configuration settings You may receive the settings for connecting to the service from your service provider. See Configuration settings service, p. 11. You can enter the settings manually. See Configuration, p. 67. To select the settings for connecting to the service, select Menu > Push to talk > Configuration sett.. Select from the following options:
Configuration to select a service provider, Default, or Personal configuration for PTT service. Only the configurations that support the PTT service are shown. Account to select a PTT service account contained in the active configuration settings Other parameters are Push to talk user name, Default nickname, Push to talk password, Domain, and Server address. DRAFT Web Select Menu > Push to talk > Web to access the Internet site of your PTT provider. 90 15. Applications A p p l i c a t i o n s In this menu you can manage applications and games. These files are stored in the phone memory or a attached microSD memory card and may be arranged in folders. For options to format or lock and unlock the memory card see Memory card, p. 71. Launch a game Your phone software includes some games. Select Menu > Applications > Games. Scroll to the desired game, and select Open. To set sounds, lights, and shakes for the game, select Menu >
Applications > Options > Application settings. For more options related to a game, see Some application options, p. 91. DRAFT Launch an application Your phone software includes some Java applications. Select Menu > Applications > Collection. Scroll to an application, and select Open. Some application options Delete to delete the application from the phone Details to give additional information about the application Update version to check if a new version of the application is available for download from Web (network service) Application access to restrict the application from accessing the network. Different categories are shown. Select in each category one of the available permissions. 91 A p p l i c a t i o n s Web page to provide further information or additional data for the application from an Internet page (network service). It is only shown if an Internet address has been provided with the application. Download an application Your phone supports J2ME Java applications. Make sure that the application is compatible with your phone before downloading it. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. You can download new Java applications and games in different ways. Use the Nokia Application Installer from PC Suite to download the applications to your phone, or select Menu > Applications > Options >
Downloads > Application downloads; the list of available bookmarks is shown. See Bookmarks, p. 97. For the availability of different services, pricing, and tariffs, contact your service provider. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. DRAFT Presenter The Presenter enables you to control slide presentations (compatible with Microsoft Office PowerPoint), a software DVD, an MP3 player, or other PC applications remotely from your device. To use applications other than slide presentations and desktop mode, you must create a corresponding custom profile on the PC application. Before you can use the application you must do the following:
1. Install the Nokia Presenter PC application on your PC. This component is available for download on the Nokia Web site. See Nokia support, p. 12. 92 A p p l i c a t i o n s 2. Launch and configure the PC component. Make sure that the selected incoming Bluetooth serial port (COM port) corresponds to the one defined in the Bluetooth software settings on the Bluetooth device of your PC. For details, refer to the PC component documentation and Set up a Bluetooth connection, p. 60. control remotely from your phone. 3. Open the slide presentation, or start the application you want to DRAFT Select Applications > Collection > Presenter > Connect and the device you want to connect to. When the Bluetooth Connection Successful dialog appears on your PC screen, you must click on it to confirm the Bluetooth connection. The list of available application types is displayed. Select Open to access the desired application. Select Options > Settings to set the Font size for the speaker notes, and Timer (in minutes) to optimize the slide presentation time available. To save the settings, select Options > Back. After you have select the slide presentation you browse or skip slides, or jump ahead, by using the 4-way navigation key. To view your speaker notes, select Notes. To point things out on the slides, select Pointer to activate a small black round marker, that you control with the 4-way navigation key. Select Options > Slide list to return to the slide list. Select Options > Applications list to return to the list of applications. To control the mouse pointer (the cursor) remotely from the phone, select the desktop mode. After you open the desktop, the phone automatically controls your mouse pointer. To return to the list of applications, select Options > Applications list. To quit the Presenter, select Options > Exit. 93 S I M s e r v i c e s 16. SIM services Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM serv. actions > Yes. Accessing these services may involve sending messages or making a phone call for which you may be charged. DRAFT 94 W e b 17. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language
(XHTML) on their pages. Appearance may vary due to screen size. You may not be able to view all details of the Internet pages. DRAFT Set up browsing You may receive the configuration settings required for browsing as a configuration message from the service provider that offers the service that you want to use. See Configuration settings service, p. 11. You can also enter all the configuration settings manually. See Configuration, p. 67. Connect to a service Ensure that the correct configuration settings of the service are activated. 1. To select the settings for connecting to the service, select Menu >
Web > Settings > Configuration settings. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal configuration for browsing. See Set up browsing, p. 95. 3. Select Account and a browsing service account contained in the active configuration settings. 4. Select Display terminal window > Yes to perform manual user authentication for intranet connections. 95 W e b Make a connection to the service in one of the following ways:
Select Menu > Web > Home; or in the standby mode, press and hold 0.
To select a bookmark of the service, select Menu > Web >
Bookmarks. address. Enter the address of the service, and select OK.
To select the last URL, select Menu > Web > Last web address.
To enter the address of the service, select Menu > Web > Go to Browse pages After you make a connection to the service, you can start browsing its pages. The function of the phone keys may vary in different services. Follow the text guides on the phone display. For more information, contact your service provider. DRAFT Browse with phone keys To browse through the page, scroll in any direction. To select a highlighted item, press the call key, or select Select. To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *. Options while browsing Select from the following options:
Home to return to your start page Shortcuts to open a new list of options that are specific to the page. This option is only available if the page contains shortcuts. Add bookmark to save the page as a bookmark Bookmarks to access the list of bookmarks. See Bookmarks, p. 97. Page options to show the list of options for the active page History to get a list showing the last visited URLs Downloads to show the list of bookmarks for downloading 96 Other options to show a list of other options Reload to reload and update the current page The service provider may also offer other options. W e b 2. Scroll to a bookmark, and select it, or press the call key to make a Direct calling While browsing, you can make a phone call, and save a name and a phone number from a page. Bookmarks You can save page addresses as bookmarks in the phone memory. 1. While browsing, select Options > Bookmarks; or in the standby connection to the page associated with the bookmark. mode, select Menu > Web > Bookmarks. DRAFT a new bookmark; or to save the bookmark to a folder. Receive a bookmark When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To view the bookmark, select Show. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. 3. Select Options to view, edit, delete, or send the bookmark; to create Appearance settings While browsing, select Options > Other options > Appearance settings;
or in the standby mode, select Menu > Web > Settings > Appearance settings and from the following options:
Text wrapping > On to set the text to continue on the next line on the display. If you select Off, the text is abbreviated. Font size to set the font size 97 W e b Show images > No to hide images on the page. This can speed up the browsing of pages that contain a lot of images. Alerts > Alert for unsecure conn. > Yes to set the phone to alert when a secure connection changes to an unsecure one during browsing Alerts > Alert for unsecure items > Yes to set the phone to alert when a secure page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see Browser security, p. 100. Character encoding > Content encoding to select the encoding for the browser page content Character encoding > Unicode (UTF-8) web add. > On to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a Web page created in foreign language. Screen size > Full or Small to set the screen layout JavaScript > Enable to enable the Java scripts DRAFT Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See Cache memory, p. 100. While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings >
Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject. Security settings Scripts over secure connection You can select whether to allow the running of scripts from a secure page. The phone supports WML scripts. While browsing, to allow the scripts, select Options > Other options >
Security > WMLScript settings; or in the standby mode, select Menu >
Web > Settings > Security settings > WMLScripts in sec. conn. > Allow. 98 Download settings To automatically save all downloaded files in Gallery, select Menu >
Web > Settings > Downloading settings > Automatic saving > On. W e b Service inbox The phone is able to receive service messages sent by your service provider (network service). Service messages are notifications (for example, news headlines), and they may contain a text message or an address of a service. To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox. To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate the browser and download the marked content, select Retrieve. To display detailed information on the service notification or to delete the message, select Options > Details or Delete. DRAFT Service inbox settings Select Menu > Web > Settings > Service inbox settings. To set whether you want to receive service messages, select Service messages > On or Off. To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels. To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message. 99 W e b Cache memory A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache. To empty the cache while browsing, select Options > Other options >
Clear the cache; in the standby mode, select Menu > Web > Clear the cache. Browser security Security features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider. DRAFT Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider. To view or change the security module settings, select Menu >
Settings > Security > Security module settings. Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. Certificates The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct. Before changing any certificate settings, you must make sure that you really trust 100 W e b is displayed during a connection, if the data transmission between the owner of the certificate and that the certificate really belongs to the listed owner. There are three kinds of certificates: server certificates, authority certificates, and user certificates. You may receive these certificates from your service provider. Authority certificates and user certificates may also be saved in the security module by the service provider. To view the list of the authority or user certificates downloaded into your phone, select Menu > Settings > Security > Authority certificates or User certificates. the phone and the content server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server. DRAFT Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign, which may include the amount and date, is shown. Check that the header text is Read and that the digital signature icon If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN. To sign the text, read all of the text first, and select Sign. The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing. Select the user certificate you want to use. Enter the signing PIN (see Access codes, p. 10), and select OK. The digital signature icon disappears, and the service may display a confirmation of your purchase. is shown. 101 P C c o n n e c t i v i t y 18. PC connectivity You can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through a Bluetooth or a data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. Nokia PC Suite With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service). You may find more information and PC Suite on the Nokia Web site at www.nokia.com/support. DRAFT EGPRS, HSCSD, and CSD With your phone you can use the enhanced GPRS (EGPRS), general packet radio service (GPRS), high-speed circuit switched data (HSCSD), and circuit switched data (CSD, GSM data) data services. For availability and subscription to data services, contact your network operator or service provider. The use of HSCSD services consumes the phone battery faster than normal voice or data calls. You may need to connect the phone to a charger for the duration of data transfer. See Modem settings, p. 62. Data communication applications For information on using a data communication application, refer to the documentation provided with it. Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation. For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call. 102 19. Battery information B a t t e r y i n f o r m a t i o n DRAFT Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger and then disconnect and reconnect it to start the charging. Unplug the charger from the electrical plug and the device when not in use. Do not leave fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15C and 25C (59F and 77F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. 103 B a t t e r y i n f o r m a t i o n Nokia battery authentication Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase. Authenticate hologram 1. When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. DRAFT code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. up, you should see 1, 2, 3, and 4 dots on each side respectively. 2. When you angle the hologram left, right, down, and 3. Scratch the side of the label to reveal a 20-digit 104 B a t t e r y i n f o r m a t i o n 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. example, Battery 12345678919876543210, and send to 5555. example, 12345678919876543210, and send to +61 427151515.
For India only: Enter Battery followed by the 20-digit battery code, for To create a text message enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276. To create a text message,
For countries in Asia Pacific, excluding India: Enter the 20-digit code, for DRAFT National and international operator charges will apply. You should receive a message indicating whether the code can be authenticated. What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery. 105 T e c h n i c a l I n f o r m a t i o n 20. Technical Information Frequency range (Tx) Frequency range (Rx) Weight Battery Networks Size DRAFT 110 grams (3.1 ounces) incl. BL-4C battery 820 mAh Li-Ion Battery Wireless networks GSM 850, 900, 1800 and 1900 4.45 cubic inches (75 ccm) Volume:
3.6 in (92 mm) Length:
Width:
1.9 in (48 mm) Thickness: 0.8 in (20 mm) GSM 850: 869 - 894 MHz GSM 900: 925 - 960 MHz GSM 1800: 1805 - 1880 MHz GSM 1900: 1930 - 1990 MHz GSM 850: 824 - 849 MHz GSM 900: 880 - 915 MHz GSM 1800: 1710 - 1785 MHz GSM 1900: 1850 - 1910 MHz 2 W (max) 3.7 V DC GSM 850: 124 GSM 900: 174 GSM 1800: 374 GSM1900: 299 32 MB flash memory 16 MB RAM 59 F to 77 F
(15 C to 25 C) Tx output power Battery voltage Number of channels Phone memory size Operating temperature 106 C a r e a n d m a i n t e n a n c e Care and maintenance
Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.
Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. DRAFT earrings or jewellery may scratch the display. circuit boards and fine mechanics. sensor, and light sensor lenses). the device. operation.
Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
Do not paint the device. Paint can clog the moving parts and prevent proper
Do not touch the main display with hard or angular materials. Objects like
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.
Use chargers indoors.
Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. 107 A d d i t i o n a l s a f e t y i n f o r m a t i o n Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure that the above separation distance instructions are followed until the transmission is completed. Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. DRAFT Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following:
108 A d d i t i o n a l s a f e t y i n f o r m a t i o n
Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker
Not carry the device in a breast pocket
Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. DRAFT Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel 109 A d d i t i o n a l s a f e t y i n f o r m a t i o n depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Emergency calls To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device. Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. DRAFT 4. Press the call key. If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. 2. Press the end key as many times as needed to clear the display and ready the 3. Enter the official emergency number for your present location. Emergency numbers vary by location. device for calls. Certification information (SAR) THIS MODEL PHONE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by international guidelines (ICNIRP). These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards and 110 A d d i t i o n a l s a f e t y i n f o r m a t i o n guidelines include a substantial safety margin designed to assure the safety of the public, regardless of age and health and to account for any variations in measurements. The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be well below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value when tested according to international testing procedures for use at the ear is 0.85 W/kg. SAR values may vary depending on national reporting and testing requirements and the network band. Use of device accessories and enhancements may result in different SAR values. Additional SAR information may be provided under product information at www.nokia.com. USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged over 1 gram of tissue. This device model has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.16 W/kg and when properly worn on the body is 0.70 W/kg. Information about this device can be found on the FCC's website at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: PPIRM-115. DRAFT 111 A P P E N D I X APPENDIX DRAFT A message from the CTIA 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing. But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle--whether on the phone or not. The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same. But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need. 112 A P P E N D I X 2. When available, use a hands free device. A number of hands free When it comes to the use of wireless phones, safety is your most important call. Wireless phone "Safety Tips"
1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you. DRAFT your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road. 5. Do not take notes or look up phone numbers while driving. If you are 3. Position your wireless phone within easy reach. Make sure you place reading an address book or business card, or writing a to do list while driving a car, you are not watching where you are going. Its common sense. Dont get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles. 4. 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with 113 A P P E N D I X times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road. 8. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a Good Samaritan in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. DRAFT 9. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!
10.Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a Good Samaritan in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. 11.Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be 114 stolen, call roadside assistance or other special non-emergency wireless number. A P P E N D I X Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely. The wireless industry reminds you to use your phone safely when driving. For more information, please call 1-888-901-SAFE. For updates: http://www.wow-com.com/consumer/issues/driving/
articles.cfm?ID=85 DRAFT Message from the FDA The U.S. Food and Drug Administration (FDA) provides the following consumer information about wireless phones. See http://www.fda.gov/cellphones/ for updated information. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. 115 A P P E N D I X type emitted by wireless phones;
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best
Design wireless phones in a way that minimizes any RF exposure to What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:
Support needed research into possible biological effects of RF of the DRAFT FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration The National Institutes of Health participates in some interagency working group activities, as well. FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF possible information on possible effects of wireless phone use on human health. 116 A P P E N D I X DRAFT exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document. What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a 117 A P P E N D I X DRAFT key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure. Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, 118 A P P E N D I X DRAFT then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit. Do wireless phone accessories that claim to shield the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim. How does FCC Audit Cell Phone RF?
After FCC grants permission for a particular cellular telephone to be marketed, FCC will occasionally conduct post-grant testing to determine whether production versions of the phone are being produced to conform with FCC regulatory requirements. The manufacturer of a cell phone that does not meet FCCs regulatory requirements may be required to remove the cell phone from use and to refund the purchase price or provide a replacement phone, and may be subject to civil or criminal penalties. In addition, if the cell phone presents a risk of injury to the user, FDA may also take regulatory action. The most important post-grant test, from a consumers perspective, is testing of the RF emissions of the phone. FCC measures the Specific Absorption Rate
(SAR) of the phone, following a very rigorous testing protocol. As is true for nearly any scientific measurement, there is a possibility that the test measurement may be less than or greater than the actual RF emitted by 119 A P P E N D I X the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as measurement uncertainty. When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate. This approach ensures that when FCC takes regulatory action, it will have a sound, defensible scientific basis. FDA scientific staff reviewed the methodology used by FCC to measure cell phone RF, and agreed it is an acceptable approach, given our current understanding of the risks presented by cellular phone RF emissions. RF emissions from cellular phones have not been shown to present a risk of injury to the user when the measured SAR is less than the safety limits set by FCC (an SAR of 1.6 w/kg). Even in a case where the maximum measurement uncertainty permitted by current measurement standards was added to the maximum permissible SAR, the resulting SAR value would be well below any level known to produce an acute effect. Consequently, FCCs approach with measurement uncertainty will not result in consumers being exposed to any known risk from the RF emitted by cellular telephones. FDA will continue to monitor studies and literature reports concerning acute effects of cell phone RF, and concerning chronic effects of long-
term exposure to cellular telephone RF (that is, the risks from using a cell phone for many years). If new information leads FDA to believe that a change to FCCs measurement policy may be appropriate, FDA will contact FCC and both agencies will work together to develop a mutually-acceptable approach. Updated July 29, 2003 DRAFT 120 Index I n d e x camera options . 24 settings . 65 waiting . 24 call log . 54 call register. See call log. callback request . 88 calls A access codes . 10 accessories. See enhancements. active standby . 18, 56 alarm clock . 80 antenna . 16 applications collection . 91 download . 12 audio messages . 34 B barring password . 11 battery answer . 23 international . 22 making of . 22 reject . 23 speed dialing . 22 voice dialing . 22 DRAFT effects . 74 filter . 74 key . 17 record a video clip . 74 settings . 74 take a photo . 73 care . 107 certificates . 100 character case . 25 charge the battery . 14 charger connector . 17 circuit switched data . 102 clock settings . 57 codes . 10, 11 configuration . 67 setting service . 11 settings . 16 contact information . 12 contacts authentication . 104 charging . 14, 103 discharging . 103 installation . 13 blacklist . 37 Bluetooth . 59 bookmarks . 97 browser appearance settings . 97 bookmarks . 97 browsing pages . 96 cache memory . 100 certificates . 100 cookies . 98 digital signature . 101 security . 98 security module . 100 set up . 95 business cards . 52 C cache memory . 100 calculator . 82 calendar . 80 note . 81 copy . 49 delete . 49 edit . 49 groups . 53 my numbers . 53 my presence . 50 save . 48 search . 48 service numbers . 53 settings . 52 speed dialing . 53 subscribed names . 51 functions . 22 key . 17 log . 54 call 121 I n d e x cookies . 98 countdown timer . 83 CSD. See circuit switched data. customer service . 12 D data hearing aid . 67, 109 high-speed circuit switched data 102 HSCSD. See high-speed circuit switched data. I IM. See instant messaging. IMAP4 . 35 indicators . 19 info messages . 43 infrared connection . 61 installation applications . 12 content . 12 settings . 99 messages . 44 digital signature . 101 display . 17, 18 downloads communication . 102 transfer . 63 data cable . 64 date settings . 57 delete DRAFT E earpiece . 17 EGPRS . 62 EGPRS. See packet data. e-mail application . 35 setting wizard . 35 emergency calls . 110 end battery . 13 SIM card . 13 instant messaging . 38 Internet IR . 61 J junk folder . 37 K keyguard . 21 keypad . 17 keypad lock . 21 keys call key . 17 end key . 17 keyguard . 21 keypad . 17 keypad lock . 21 navigation key . 17 power on/off . 17 selection keys . 17, 18 call . 22 key . 17 enhancements . 9, 66 equalizer . 78 explosive environments . 109 F factory settings . 70 flash messages . 34 FM radio . 76 G gallery . 71 games . 91 GPRS . 62 H handsfree. See loudspeaker. L language settings . 66 lights . 67 location information . 54 log . 54 loudspeaker . 17, 24 M main display . 17, 18, 56 maintenance . 107 media player . 74 122 I n d e x medical devices . 108 memory card . 71 formatting . 72 locking . 72 memory consumption . 72 memory full . 32 menu . 27 message messages folder . 32 message center number . 28 message settings e-mail . 46 general settings . 44 multimedia messages . 45 text messages . 44 DRAFT audio message . 34 cancel sending . 31 delete . 44 flash message . 34 info messages . 43 length indicator . 28 message settings . 44 postcards . 33 sending . 31 service commands . 43 text . 28 voice message . 43 write text message . 28 microphone . 17 mini display . 57 MMS. See multimedia messages. multimedia messages create . 30 read . 31 reply . 31 send . 30 write . 30 music player . 75 N navigation . 27 navigation key . 17, 59 network numbers . 53 O offline mode . 21 one-to-one contact . 89 operator menu . 70 organizer . 80 overview functions . 10 P pacemakers . 108 packet data . 62, 102 parts . 17 PC connectivity . 102 PC Suite . 102 phone care . 107 configuration . 67 keys . 17 maintenance . 107 open . 15 parts . 17 settings . 66 updates . 66, 70 phone lock. See keypad lock. photo . 73 PictBridge . 64 PIN codes . 11, 15 plug and play service . 16 POP3 . 35 Pop-Port connector . 17 positioning . 54 postcards . 33 power key . 17 predictive text input . 25 presence . 50 presenter . 92 print images . 71 profiles . 55 PTT . 84 add channel . 85 call to multiple recipients . 87 callback request . 88 channel . 84 channel call . 86 configuration settings . 90 invitation . 85 name on display . 18 services . 8 Nokia contact information . 12 notes . 82 calendar . 81 123 I n d e x login status . 86 make call . 86 one-to-one call . 87 one-to-one contact . 89 receive call . 86, 87 settings . 89 switch on/off . 86 PUK codes . 11 Push to talk see PTT clock . 57 configuration . 67 connectivity . 59 data transfer . 63 date . 57 downloads . 99 enhancements . 66 fold animation . 56 GPRS, EGPRS . 62 infrared . 61 IR . 61 main display . 56 messages . 44 mini display . 57 my shortcuts . 58 phone . 66 profiles . 55 PTT . 89 PTT configuration . 90 restore factory settings . 70 screen saver . 56 security . 68 service inbox . 99 standby mode . 56 themes . 55 time . 57 tones . 55 USB data cable . 64 wallpaper . 56 shared memory . 9 shortcuts . 19, 58 signal strength . 18 SIM pushed messages . 99 R radio . 76 record sound . 78 recorder . 78 repair service . 12 ringing tones . 55 S safety DRAFT additional information . 108 emergency calls . 110 explosive environments . 109 guidelines . 7 hearing aid . 109 medical devices . 108 operating environment . 108 pacemakers . 108 vehicles . 109 screen saver . 56 scroll key. See navigation key. scrolling . 27 security codes . 10 module . 100 settings . 68 selection keys . 17, 18 service card . 21 card installation . 13 messages . 29 services . 94 size . 106 SMS. See text messages software updates . 66, 70 spam filter . 37 speed dialing . 22, 53 standby mode . 18, 58 status indicators . 18 stereo widening . 79 stopwatch . 83 strap . 16 streaming service . 74 subscribed names . 51 support . 12 commands . 43 inbox . 99 messages . 99 numbers . 53 active standby . 56 call . 65 camera . 74 services settings 124 switch on and off . 15 swivel . 56 synchronisation . 63 T take a photo . 73 technical information . 106 text I n d e x video clip . 74 voice commands . 59 dialing . 22 messages . 43 recorder . 78 volume key . 17 W wallpaper . 56 Web bookmarks . 97 connect . 95 weight . 106 wireless markup language . 95 wrist strap . 16 write text . 25 X XHTML . 95 XpressPrint . 71 Y zoom key . 17 character case . 25 message . 28 predictive text input . 25 traditional text input . 26 writing . 25 text phone . 67 themes . 55 time settings . 57 to-do list . 81 tones . 55 traditional text input . 26 U unlock keypad . 21 UPIN . 15 V vehicles . 109 DRAFT 125
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2006-03-21 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral | |||
3 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2006-03-21
|
||||
1 2 3 | Applicant's complete, legal business name |
Microsoft Corporation
|
||||
1 2 3 | FCC Registration Number (FRN) |
0007807100
|
||||
1 2 3 | Physical Address |
1 Microsoft Way
|
||||
1 2 3 |
Redmond, Washington 98052
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
h******@AmericanTCB.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
1 2 3 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
PPI
|
||||
1 2 3 | Equipment Product Code |
RM-115
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
H****** S******
|
||||
1 2 3 | Title |
Director, EMC, SI, and RF Compliance
|
||||
1 2 3 | Telephone Number |
425-7********
|
||||
1 2 3 | Fax Number |
425-7********
|
||||
1 2 3 |
h******@microsoft.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 | PCE - PCS Licensed Transmitter held to ear | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | GSM 850/900/1800/1900MHz Cellphone w/BT | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power Output listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains a GSM PCS phone. | ||||
1 2 3 | Power Output is ERP for Part 22 and EIRP for Part 24. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 2.2 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Part 22 Head: 1.16 W/kg; Body-worn 0.70 W/kg; PCS Band Head: 0.96 W/kg; Body-worn 0.33 W/kg. This device contains 900/1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations. This device contains a Bluetooth transmitter. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
TCC Copenhagen
|
||||
1 2 3 | Name |
S**** B****
|
||||
1 2 3 | Telephone Number |
45-33********
|
||||
1 2 3 | Fax Number |
45-33********
|
||||
1 2 3 |
r******@nokia.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402 | 2480 | 0.000851 | 1M00FXD | ||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 2402 | 2480 | 0.000851 | 1M00GXD | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 24E | BC | 1850.2 | 1909.8 | 1.479 | 0.1 ppm | 300GXW | |||||||||||||||||||||||||||||||||
3 | 2 | 24E | BC | 1850.2 | 1909.8 | 0.646 | 0.1 ppm | 300G7W | |||||||||||||||||||||||||||||||||
3 | 3 | 22H | BC | 824.2 | 848.8 | 1.738 | 0.1 ppm | 300GXW | |||||||||||||||||||||||||||||||||
3 | 4 | 22H | BC | 824.2 | 848.8 | 0.741 | 0.1 ppm | 300G7W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC