all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Manual | Users Manual | 1.59 MiB | ||||
1 2 3 | External Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Block Diagram | / November 11 2006 | ||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report |
1 2 3 | Manual | Users Manual | 1.59 MiB |
RM-209_en_1_FCC.fm Page 1 Thursday, September 7, 2006 12:18 PM Nokia 7373 User Guide DRAFT 925XXXX Issue 1 RM-209_en_1_FCC.fm Page 2 Thursday, September 7, 2006 12:18 PM DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-209 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. Copyright 2006 Nokia. All rights reserved. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. For more information, see product Eco-Declaration or country specific information at www.nokia.com. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia, Nokia Connecting People, Xpress-on, XpressPrint, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation. US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2006. Tegic Communications, Inc. All rights reserved. 0434 DRAFT Java is a trademark of Sun Microsystems, Inc. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. RM-209_en_1_FCC.fm Page 3 Thursday, September 7, 2006 12:18 PM This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment. DRAFT 925XXXX/Issue 1 RM-209_en_1_FCC.fm Page 4 Thursday, September 7, 2006 12:18 PM Contents DRAFT For your safety.......................... 6 General information................. 9 Access codes............................................ 9 Configuration settings service ........ 10 Download content .............................. 10 Nokia support....................................... 10 1. Get started ......................... 11 Install SIM card and battery ............ 11 Insert a microSD card ........................ 12 Charge the battery.............................. 13 Open and close the phone................ 13 Switch the phone on and off........... 14 Antenna ................................................. 14 Phone strap........................................... 15 2. Your phone......................... 16 Keys and parts...................................... 16 Standby mode ...................................... 17 Flight mode........................................... 19 Keypad lock (keyguard) ..................... 19 Functions without a SIM card......... 20 3. Call functions..................... 20 Make a call ........................................... 20 Answer or reject a call....................... 21 Options during a call.......................... 22 4. Write text........................... 22 Traditional text input......................... 23 Predictive text input .......................... 23 5. Navigate the menus .......... 24 6. Messaging .......................... 25 Text message........................................ 25 Multimedia message.......................... 26 Postcards ............................................... 28 Flash messages .................................... 29 Nokia Xpress audio messaging........ 29 Memory full .......................................... 30 Folders.................................................... 30 E-mail application .............................. 30 Instant messaging............................... 33 Voice messages.................................... 37 Info messages ...................................... 37 Service commands.............................. 37 Delete messages.................................. 37 SIM messages....................................... 38 Message settings................................. 38 7. Contacts.............................. 41 Search for a contact .......................... 41 Save names and phone numbers.... 41 Save details........................................... 41 Copy or move contacts...................... 42 Edit contact details ............................ 42 Synchronize all .................................... 42 Delete contacts.................................... 42 Business cards...................................... 43 Settings.................................................. 43 Groups.................................................... 43 Speed dials............................................ 44 Info, service, and my numbers ........ 44 8. Call log................................ 44 Location information ......................... 45 9. Settings............................... 45 Profiles ................................................... 45 Themes ................................................... 46 Tones....................................................... 46 Display.................................................... 46 Time and date ...................................... 47 My shortcuts ........................................ 47 Connectivity ......................................... 49 Call .......................................................... 53 Phone...................................................... 54 4 RM-209_en_1_FCC.fm Page 5 Thursday, September 7, 2006 12:18 PM Enhancements...................................... 55 Configuration........................................ 55 Security .................................................. 56 Restore factory settings..................... 57 Phone software updates.................... 57 10. Operator menu ................ 58 11. Gallery.............................. 59 Print images.......................................... 59 Memory card......................................... 59 12. Media ............................... 61 Camera and video................................ 61 Media player ......................................... 62 Music player.......................................... 63 Radio ....................................................... 64 Voice recorder....................................... 66 Equalizer................................................. 66 Stereo widening................................... 67 13. Organizer.......................... 67 Alarm clock............................................ 67 Calendar ................................................. 68 To-do list................................................ 68 Notes....................................................... 69 Calculator .............................................. 69 Countdown timer ................................ 69 Stopwatch ............................................. 69 14. Applications..................... 70 Launch a game..................................... 70 Launch an application........................ 71 Application options............................. 71 Download an application .................. 71 DRAFT 15. Web................................... 72 Set up browsing................................... 72 Connect to a service........................... 72 Browse pages........................................ 73 Bookmarks ............................................. 73 Appearance settings ........................... 74 Security settings .................................. 75 Download settings .............................. 75 Service inbox ........................................ 75 Cache memory...................................... 76 Browser security .................................. 76 16. SIM services ..................... 78 17. PC connectivity................ 79 Nokia PC Suite...................................... 79 Packet data, HSCSD, and CSD.......... 79 Bluetooth............................................... 79 Data communication applications . 80 18. Battery information......... 80 Charging and discharging................. 80 Nokia battery authentication .......... 81 19. Technical Information ..... 83 Care and maintenance ........... 84 Additional safety information 85 APPENDIX ............................... 89 A message from the CTIA........... 89 Message from FDA ....................... 91 5 RM-209_en_1_FCC.fm Page 6 Thursday, September 7, 2006 12:18 PM F o r y o u r s a f e t y For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. INTERFERENCE All wireless phones may be susceptible to interference, which could affect performance. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the phone off near medical equipment. DRAFT USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the phone where blasting is in progress. SWITCH OFF WHEN REFUELLING Do not use the phone at a refuelling point. Do not use near fuel or chemicals. SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. 6 RM-209_en_1_FCC.fm Page 7 Thursday, September 7, 2006 12:18 PM F o r y o u r s a f e t y WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so. DRAFT About your device The wireless device described in this guide is approved for use on the EGSM 900 and GSM 1800 and 1900 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect the privacy and legitimate rights of others. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others including copyrights. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger. Network services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your 7 RM-209_en_1_FCC.fm Page 8 Thursday, September 7, 2006 12:18 PM F o r y o u r s a f e t y device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as multimedia messaging service
(MMS), browsing, e-mail application, instant messaging, presence enhanced contacts, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies. Shared memory The following features in this device may share memory: gallery, contacts, text messages, multimedia messages, and instant messages, e-mail, calendar, to-do notes, JavaTM games and applications, and note application. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features. DRAFT Enhancements A few practical rules about accessories and enhancements:
Keep all accessories and enhancements out of the reach of small children.
When you disconnect the power cord of any accessory or enhancement, grasp
Check regularly that enhancements installed in a vehicle are mounted and and pull the plug, not the cord. are operating properly.
Installation of any complex car enhancements must be made by qualified personnel only. 8 RM-209_en_1_FCC.fm Page 9 Thursday, September 7, 2006 12:18 PM G e n e r a l i n f o r m a t i o n General information Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see Security, p. 56. PIN codes The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See Security, p. 56. The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions. The module PIN is required to access the information in the security module. See Security module, p. 77. The signing PIN is required for the digital signature. See Digital signature, p. 78. DRAFT PUK codes The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your local service provider for the codes. Barring password The barring password (4 digits) is required when using the Call barring service. See Security, p. 56. 9 RM-209_en_1_FCC.fm Page 10 Thursday, September 7, 2006 12:18 PM G e n e r a l i n f o r m a t i o n Configuration settings service To use some of the network services, such as mobile Internet services, MMS, Nokia Xpress audio messaging, or remote Internet server synchronization, your phone needs the correct configuration settings. For more information on availability, contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia Web site, www.nokia.com/support. When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration settings received is displayed. To save the settings, select Show > Save. If required, enter the PIN code supplied by the service provider. To discard the received settings, select Exit or Show > Discard. DRAFT Download content You may be able to download new content (for example, themes) to the phone (network service). You may also be able to download updates of phone software (network service). See Phone, p. 54, Phone updates. For the availability of different services, pricing, and tariffs, contact your service provider. Nokia support Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product. On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia Care contact centers at www.nokia.com/customerservice. For maintenance services, check your nearest Nokia service center at www.nokia.com/repair. Important: Use only services that you trust and that offer adequate security and protection against harmful software. 10 RM-209_en_1_FCC.fm Page 11 Thursday, September 7, 2006 12:18 PM 1. Get started G e t s t a r t e d Install SIM card and battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards and memory cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with BL-4B battery. Always use original Nokia batteries. See Nokia battery authentication, p. 81. The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card. To remove the back cover of the phone, press and slide the cover (1). DRAFT Remove the battery as shown (2). Open (3) the SIM card holder. Insert the SIM card properly into the holder (4). Close the SIM card holder (5), and slightly press the holder to lock it (6). 11 RM-209_en_1_FCC.fm Page 12 Thursday, September 7, 2006 12:18 PM G e t s t a r t e d Replace the battery
(7). Observe the battery contacts. Slide the back cover into its place (8, 9). DRAFT Insert a microSD card Keep all microSD memory cards out of the reach of small children. Switch the phone off, and remove the back cover and the battery of the phone. Slide the memory card holder to unlock (1) and open the card holder
(2). Insert the memory card into the card holder with the contact surface facing backwards (3), and close the card holder
(4). Slide the card holder to lock it (5). Replace the battery and close the back cover of the phone. Use only compatible microSD cards with this device. Other memory cards, such as Reduced Size MultiMedia cards, do not fit in the microSD card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted. Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device. 12 RM-209_en_1_FCC.fm Page 13 Thursday, September 7, 2006 12:18 PM G e t s t a r t e d Charge the battery Check the model number of any charger before use with this device. This device is intended for use when supplied with power from an AC-3 charger. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. socket on the bottom of your phone. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 1. Connect the charger to a wall socket. 2. Connect the lead from the charger to the DRAFT If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. The charging time depends on the charger used. Charging a BL-4B battery with the AC-3 charger takes approximately 2 hours and 20 minutes while the phone is in the standby mode. Open and close the phone To open the phone rotate the upper part to the right
(1) or to the left until it snaps into place. To close the phone, rotate the upper part down in the opposite direction (2). Important: When you open the phone, rotate the upper part 180 degrees to the left or right. Do not rotate the upper part more than 180 degrees. If you force the upper part more than 180 degrees in either direction, the phone will be damaged. To switch off a tone that sounds when you open and close the phone, see Tones, p. 46. 13 RM-209_en_1_FCC.fm Page 14 Thursday, September 7, 2006 12:18 PM G e t s t a r t e d Switch the phone on and off Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Press and hold the power key. See Keys and parts, p. 16. If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****), and select OK. Set the time and date Enter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See Time and date, p. 47. Plug and play service When you switch on your phone for the first time, and the phone is in the standby mode, you are asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Connect to support," p. 56, and Configuration settings service, p. 10. DRAFT Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life. Antenna Your device has an internal antenna. 14 RM-209_en_1_FCC.fm Page 15 Thursday, September 7, 2006 12:18 PM G e t s t a r t e d Phone strap Thread a strap through the eyelet of the phone as shown in the picture and tighten it. DRAFT 15 RM-209_en_1_FCC.fm Page 16 Thursday, September 7, 2006 12:18 PM Y o u r p h o n e 2. Your phone Keys and parts Earpiece (1) Twin stereo speakers (2) Left selection key (3) Middle selection key (4) Right selection key (5) Volume key and zoom key (6) 4-way scroll key (7) Call key (8) End key (9) Keypad (10) Microphone (11) DRAFT Phone strap eyelet (12) Charger connector (13) Pop-PortTM connector (14) Camera lens (15) Power key (16) Camera key (17) 16 RM-209_en_1_FCC.fm Page 17 Thursday, September 7, 2006 12:18 PM Y o u r p h o n e Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. Display Signal strength of the cellular network (1) Battery charge status (2) Indicators (3) Name of the network or the operator logo (4) Clock (5) Main screen (6) Function of left selection key (7) is Go to or a shortcut to another function. See Left selection key, p. 47. Function of middle selection key (8) is Menu Function of right selection key (9) is Music or a shortcut to another function. SeeRight selection key, p. 48. Operator variants may have an operator-specific name to access an operator-specific Web site. DRAFT Power saving Your phone has some features in order to save battery power in standby mode if the phone is not active. These features may be activated or not. See Power saver and Sleep mode in Display, p. 46. Active standby In the active standby mode there is a list of selected phone features and information on the screen that you can directly access. To switch it on or off, select Menu > Settings > Display > Active standby > Active standby mode > On or Off. In the standby mode, scroll up or down to activate the navigation in the list, and select Select or View. Left and right arrows at the beginning and end of a line indicate that further information is available by 17 RM-209_en_1_FCC.fm Page 18 Thursday, September 7, 2006 12:18 PM Y o u r p h o n e scrolling left or right. To end the active standby navigation mode, select Exit. To organize and change the active standby mode, activate the navigation mode, and select Options and from the available options. Indicators Shortcuts in the standby mode
To access the list of dialed numbers, press the call key once. Scroll to the number or name that you want; and to call the number, press the call key.
To open the web browser, press and hold 0.
To call your voice mailbox, press and hold 1.
Use the scroll key as a shortcut. See My shortcuts, p. 47. You have unread messages in the Inbox folder. DRAFT You received one or several instant messages. The phone registered a missed call. Your phone is connected to the instant messaging service, and the availability status is online or offline. You have unsent, canceled or failed messages in the Outbox folder. The phone does not ring for an incoming call or text message. The keypad is locked. The alarm clock is activated The countdown timer is running. The stopwatch is running in the background. The phone is registered to the GPRS or EGPRS network. A GPRS or EGPRS connection is established.
/
/
/
18 RM-209_en_1_FCC.fm Page 19 Thursday, September 7, 2006 12:18 PM Y o u r p h o n e
/
The GPRS or EGPRS connection is suspended (on hold). A Bluetooth connection is active. If you have two phone lines, the second phone line is selected. All incoming calls are diverted to another number.
,
, or The timed profile is selected. Calls are limited to a closed user group. The loudspeakers are activated, or the music stand is connected to the phone.
, A headset, hands-free, loopset, or music stand enhancement is connected to the phone. DRAFT Flight mode You can deactivate all radio frequency functionality and still have access to offline games, calendar, and phone numbers. Use the flight mode in radio sensitive environmentson board aircraft or in hospitals. When the flight mode is active, Select Menu > Settings > Profiles > Flight > Activate or Personalise. To deactivate the flight mode, select any other profile. In the flight mode you can make an emergency call. Enter the emergency number, press the call key, and select Yes when asked Exit flight profile? The phone attempts to make an emergency call. Keypad lock (keyguard) To prevent accidental keypresses, select Menu, and press * within 3.5 seconds to lock the keypad. To unlock the keypad, select Unlock, and press * within 1.5 seconds. If the Security keyguard is set On, enter the security code if requested. To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks. is shown. 19 RM-209_en_1_FCC.fm Page 20 Thursday, September 7, 2006 12:18 PM C a l l f u n c t i o n s For Automatic keyguard and Security keyguard, see Phone, p. 54. When the keyguard is on, calls may be possible to the official emergency number programmed into your device. 3. Call functions Functions without a SIM card Several functions of your phone may be used without installing a SIM card (for example, the data transfer with a compatible PC or another compatible device). Some functions appear dimmed in the menus and cannot be used. For an emergency call, some networks may require that a valid SIM card is properly inserted in the device. DRAFT For international calls, press * twice for the international prefix (the
+ character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number. Make a call 1. Enter the phone number, including the area code. 3. To end the call or to cancel the call attempt, press the end key, or To adjust the volume in a call, press the volume up or down key. 2. To call the number, press the call key. close the phone. To search for a name or phone number that you have saved in Contacts, see Search for a contact, p. 41. Press the call key to call the number. To access the list of dialed numbers, press the call key once in the standby mode. To call the number, select a number or name, and press the call key. 20 RM-209_en_1_FCC.fm Page 21 Thursday, September 7, 2006 12:18 PM C a l l f u n c t i o n s Speed dialing Assign a phone number to one of the speed-dialing keys, 2 to 9. See Speed dials, p. 44. Call the number in either of the following ways:
Press a speed-dialing key, then the call key.
If Speed dialling is set to On, press and hold a speed-dialing key until Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. Enhanced voice dialing You can make a phone call by saying the name that is saved in the contact list of the phone. Voice commands are language-dependent. To set the language, see Recognition lang. in Phone, p. 54. the call begins. See Speed dialling in Call, p. 53. DRAFT 2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. The phone plays the voice command of the match on the top of the list. If the result is not the correct one, scroll to another entry. Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in My shortcuts, p. 47. In the standby mode, press and hold the right selection key, or press and hold the volume down key. A short tone is played, and Speak now is displayed. Answer or reject a call To answer an incoming call, press the call key, or open the phone. To end the call, press the end key, or close the phone. To reject an incoming call, press the end key. To mute the ringing tone, select Silence. 1. 21 RM-209_en_1_FCC.fm Page 22 Thursday, September 7, 2006 12:18 PM W r i t e t e x t Call waiting To answer the waiting call during an active call (network service), press the call key. The first call is put on hold. To end the active call, press the end key. To activate the Call waiting function, see Call, p. 53. Options during a call Many of the options that you can use during a call are network services. For availability, contact your service provider. During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voice clarity, Loudspeaker or Handset. Network services options are Answer or Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the following:
Send DTMF to send tone strings Swap to switch between the active call and the call on hold Transfer to connect a call on hold to an active call and disconnect yourself Conference to make a conference call Private call to discuss privately in a conference call DRAFT Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. 4. Write text To enter text (for example, when writing messages), use traditional or predictive text input. When you write text, press and hold Options to toggle between traditional text input, indicated by text input, indicated by predictive text input. Not all languages are supported by
, and predictive 22 RM-209_en_1_FCC.fm Page 23 Thursday, September 7, 2006 12:18 PM W r i t e t e x t
,
, and
. To change the
, press and hold #, and select Number mode. To change The character cases are indicated by character case, press #. To change from the letter to number mode, indicated by from the number to the letter mode, press and hold #. To set the writing language, select Options > Writing language. Traditional text input Press a number key, 1 to 9, repeatedly until the desired character appears. The characters available depend on the selected writing language. If the next letter you want is located on the same key as the present one, wait until the cursor appears and enter the letter. The most common punctuation marks and special characters are available under the number key 1. DRAFT adding a space, press 0. If the word is not correct, press * repeatedly, and select the word from the list. If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Enter the word using traditional text input, and select Save. To write compound words, enter the first part of the word, and press the scroll key right to confirm it. Write the last part of the word, and confirm the word. Predictive text input Predictive text input is based on a built-in dictionary to which you can also add new words. 1. Start writing a word, using the keys 2 to 9. Press each key only once 2. When you finish writing the word and it is correct, to confirm it by for one letter. 3. Start writing the next word. 23 RM-209_en_1_FCC.fm Page 24 Thursday, September 7, 2006 12:18 PM N a v i g a t e t h e m e n u s 5. Navigate the menus The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. 2. Scroll through the menu, and select an option (for example, Settings). If the selected menu contains further submenus, select the one that you want (for example, Call). If the selected menu contains further submenus, repeat step 3. To change the menu view, select Options > Main menu view > List, Grid, Grid with labels, or Tab. To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done >
Yes. DRAFT 4. 5. Select the setting of your choice. 6. To return to the previous menu level, select Back. To exit the menu, select Exit. 3. 24 RM-209_en_1_FCC.fm Page 25 Thursday, September 7, 2006 12:18 PM M e s s a g i n g 6. Messaging You can read, write, send, and save text, multimedia, e-mail, audio, and flash messages and postcards. All messages are organized into folders. Text message With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service). Before you can send any text or SMS e-mail message, you must save your message center number. See Message settings, p. 38. To check SMS e-mail service availability and to subscribe to the service, contact your service provider. To save an e-mail address in Contacts, see Save details, p. 41. Your device supports the sending of text messages beyond the character limit for a single message. Longer messages will be sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message. An indicator at the top of the display shows the total number of characters left and the number of messages needed for sending. For example, 673/2 means that there are 673 characters left and that the message will be sent as a series of 2 messages. DRAFT Write and send a message 1. Select Menu > Messaging > Create message > Text message. 2. Enter one or more phone numbers or e-mail addresses in the To: field. To retrieve a phone number or e-mail address from a memory, select Add. 3. For a SMS e-mail, enter a subject in the Subject: field. 4. Write your message in the Message: field. 5. To send the message, select Send. See Message sending, p. 27. 25 RM-209_en_1_FCC.fm Page 26 Thursday, September 7, 2006 12:18 PM M e s s a g i n g Read and reply to a message 1. To view a received message, select Show. To view it later, select Exit. is To read the message later, select Menu > Messaging > Inbox. shown if you have unread messages in Inbox. Multimedia message Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. 2. To reply to a message, select Reply and the message type. 3. Create the reply message. 4. To send the message, select Send. See Message sending, p. 27. A multimedia message can contain some attachments. To check availability and to subscribe to the multimedia messaging service (MMS), contact your service provider. See Message settings, p. 38. DRAFT Write and send a multimedia message The wireless network may limit the size of MMS messages. If the inserted image exceeds this limit, the device may make it smaller so that it can be sent by MMS. 1. Select Menu > Messaging > Create message > Multimedia. 2. Write your message. Your phone supports multimedia messages that contain several pages (slides). A message can contain a calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide. To insert a file in the message, select Insert; or select Options >
Insert. 3. To view the message before sending it, select Options > Preview. 4. To send the message, select Send. See Message sending, p. 27. 26 RM-209_en_1_FCC.fm Page 27 Thursday, September 7, 2006 12:18 PM M e s s a g i n g 5. Enter one or more phone numbers or e-mail addresses in the To: field. To retrieve a phone number or e-mail address from a memory, select Add. 6. To send the message, select Send. See Message sending, p. 27. Write and send a multimedia plus message The wireless network may limit the size of MMS messages. If the inserted image exceeds this limit, the device may make it smaller so that it can be sent by MMS. Any content can be added to the multimedia plus message. Such content might be images, video clips, sound clips, business cards, calendar notes, themes, streaming links, or even unsupported files (for example, files received with an e-mail). 1. Select Menu > Messaging > Create message > Multimedia plus. 2. Enter one or more phone numbers or e-mail addresses in the To: field. To retrieve a phone number or e-mail address from a memory, select Add. DRAFT Message sending Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. To send the message, select Send. The phone saves the message in the Outbox folder, and the sending starts. 3. Enter a subject and write your message. 4. To add a file, select Insert and from the options. 5. To view the message before sending it, select Options > Preview. 6. To send the message, select Send. See Message sending, p. 27. Note: When the phone is sending the message, the animated is shown. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider. If an interruption occurs while the message is being sent, the phone tries to resend the message a few times. If these attempts fail, the 27 RM-209_en_1_FCC.fm Page 28 Thursday, September 7, 2006 12:18 PM M e s s a g i n g message remains in the Outbox folder. To cancel the sending of the messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending. Read and reply to a message Exit. type. Create the reply message. 2. To view the whole message if the received message contains a 3. To reply to the message, select Options > Reply and the message 1. To view the received message, select Show. To view it later, select Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. 4. 5. To send the message, select Send. See Message sending, p. 27. presentation, select Play. To view the files in the presentation or the attachments, select Options > Objects or Attachments. DRAFT Postcards With the postcard messaging service (network service), create and send postcards that may contain an image and a greeting text. The postcard is sent to the service provider using multimedia messaging. The service provider prints the postcard and sends it to the postal address given with the message. MMS must be activated before this service can be used. Before you can use the postcard service you must subscribe to the service. To check the availability, and costs, and to subscribe to the service, contact your network operator or service provider. To send a postcard, select Menu > Messaging > Create message >
Postcard. Fill in the address, mandatory editor fields are marked by a *. Scroll to the image field, select Insert and an image from the gallery, or New image to insert a recent image; then write your greeting text. To send the message, select Send. 28 RM-209_en_1_FCC.fm Page 29 Thursday, September 7, 2006 12:18 PM M e s s a g i n g Flash messages Flash messages are text messages that are instantly displayed upon reception. Flash messages are not automatically saved. Write a message Select Menu > Messaging > Create message > Flash message. Enter the recipients phone number and write your message. The maximum length of a flash message is 70 characters. To insert a blinking text into the message, select Options > Insert blink charact. to set a marker. The text behind the marker blinks. To end the blinking text range insert a second marker. Receive a message A received flash message is indicated with Message: and a few words from the beginning of the message. To read the message, select Read. To extract numbers and addresses from the current message, select Options > Use detail. To save the message, select Save and the folder in which you want to save it. DRAFT Nokia Xpress audio messaging You can use the MMS to create and send a audio message in a convenient way. MMS must be activated before you can use audio messages. Create a message 1. Select Menu > Messaging > Create message > Audio message. The recorder opens. To use the recorder, see Voice recorder, p. 66. 2. Speak your message. 3. Enter one or more phone numbers in the To: field, or select Add to retrieve a number. 4. To send the message, select Send. 29 RM-209_en_1_FCC.fm Page 30 Thursday, September 7, 2006 12:18 PM M e s s a g i n g Listen to a message To open a received audio message, select Play; or if more than one message is received, select Show > Play. To listen to the message later, select Exit. Memory full When you receive a message, and the memory for the messages is full, Memory full. Unable to receive messages. is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If more messages are to be deleted, select Mark. Mark all the messages you want to delete, and select Options > Delete marked. DRAFT Folders The phone saves received messages in the Inbox folder. Messages that have not yet been sent are saved in the Outbox folder. To set the phone to save the sent messages in the Sent items folder, see Save sent messages in General settings, p. 38. To edit and send messages that you have written and saved in the Drafts folder, select Menu > Messaging > Drafts. You can move your messages to the Saved items folder. To organize your Saved items subfolders, select Menu > Messaging > Saved items. To add a folder, select Options > Add folder. To delete or rename a folder, scroll to the desired folder, and select Options > Delete folder or Rename folder. Your phone has templates. To create a new template, save a message as a template. To access the template list, select Menu > Messaging >
Saved items > Templates. E-mail application The e-mail application uses a packet data connection (network service) to allow you to access your e-mail account. This e-mail application is 30 RM-209_en_1_FCC.fm Page 31 Thursday, September 7, 2006 12:18 PM M e s s a g i n g different from the SMS e-mail function. To use the e-mail function on your phone, you need a compatible e-mail system. You can write, send, and read e-mail with your phone. Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and retrieve any e-mail messages, you must obtain a new e-mail account or use your current account. To check the availability of your e-mail account, contact your e-mail service provider. Check your e-mail settings with your e-mail service provider. You may receive the e-mail configuration settings as a configuration message. See Configuration settings service, p. 10. To activate the e-mail settings, select Menu > Messaging > Message settings > E-mail messages. See E-mail messages, p. 40. This application does not support keypad tones. DRAFT Setting wizard The setting wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings manually, select Menu >
Messaging > E-mail > Options > Manage accounts > Options > New. The Manage accounts options allow you to add, delete, and change the e-mail settings. Write and send an e-mail You can write your e-mail message before connecting to the e-mail service; or connect to the service first, then write and send your e-mail. 1. Select Menu > Messaging > E-mail > Write new e-mail. 2. If more than one e-mail account is defined, select the account from which you want to send the e-mail. 3. Enter the recipients e-mail address, write the subject, and enter the e-mail message. To attach a file from Gallery, select Options >
Attach file. 4. To send the e-mail message, select Send > Send now. 31 RM-209_en_1_FCC.fm Page 32 Thursday, September 7, 2006 12:18 PM M e s s a g i n g To save the e-mail in the Outbox folder to be sent later, select Send > Send later. To edit or continue writing your e-mail later, select Options > Save as draft. The e-mail is saved in Outboxes > Drafts. To send the e-mail later, select Menu > Messaging > E-mail >
Options > Send e-mail or Send / check e-mail. select Retrieve to download the complete e-mail message. 2. Select Back > Inboxes, the account name, and the new message, and Download e-mail 1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check new e-mail. If more than one e-mail account is defined, select the account from which you want to download the e-mail. The e-mail application only downloads e-mail headers at first. DRAFT Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. To download new e-mail messages and to send e-mail that has been saved in the Outbox folder, select Options > Send / check e-mail 2. To reply to an e-mail, select Reply > Original text or Empty message. 1. Select Menu > Messaging > E-mail > Inboxes, the account name, Read and reply to e-mail To reply to many, select Options > Reply to all. Confirm or edit the e-mail address and subject; then write your reply. and the desired message. 3. To send the message, select Send > Send now. E-mail folders Your phone saves e-mail that you have downloaded from your e-mail account in the Inboxes folder. The Inboxes folder contains the following folders: Account name for incoming e-mail, Archive for archiving 32 RM-209_en_1_FCC.fm Page 33 Thursday, September 7, 2006 12:18 PM M e s s a g i n g e-mail, Custom 1Custom 3 for sorting e-mail, and Junk where all spam e-mail is stored. The Outboxes folder contains the following folders:
Drafts for saving unfinished e-mail, Outbox for saving e-mail that has not been sent, and Sent items for saving e-mail that has been sent. To manage the folders and their e-mail content, select Options to view the available options of each folder. Spam filter To activate and define a spam filter, select Options > Spam filter >
Settings in the main e-mail idle screen. The spam filter allows you to put specific senders on a black or white list. Black list sender messages are filtered to the Junk folder. Unknown and white list sender messages are downloaded into the account inbox. To blacklist a sender, select the e-mail message in the Inboxes folder and Options > Blacklist sender. DRAFT Instant messaging With instant messaging (IM) (network service) you can send short, simple text messages to online users. You have to subscribe to a service and register with the IM service you want to use. For more information about signing up for IM services, contact your service provider. To set the required settings for the IM service, see Connection settings in Access, p. 33. The icons and texts on the display may vary, depending on the IM service. Note: Depending on your IM service, you may not have access to all of the features described in this guide. Access Select Menu > Messaging > IMs. IMs may be replaced by another term depending on the service provider. If more than one set of connection settings for IM service is available, select the one you want. Select from the following options:
Login to connect to the IM service. To set the phone to automatically connect to the IM service when you switch on the phone; in the login session, select Automatic login: > On, or select Menu > Messaging >
33 RM-209_en_1_FCC.fm Page 34 Thursday, September 7, 2006 12:18 PM M e s s a g i n g IMs, connect to the IM service, and select Options > Settings >
Automatic login > On. Saved conversations to view, erase, or rename the conversations that you saved during an IM session Connection settings to edit the settings needed for messaging and presence connection Connect To connect to the service, access the instant messages menu, select the IM service, if needed, and select Login. To disconnect from the IM service, select Options > Logout. DRAFT Sessions When connected to the service, your status, as seen by others, is shown in a status line: My status: Online, My status: Busy or Status: Appear off.. To change your own status, select Change. Below the status line there are three folders that contain your contacts and showing their status: Conversations, Online and Offline. To expand the folder, highlight it, and select Expand (or scroll right); to collapse the folder, select Collapse (or scroll left). Conversations shows the list of new and read instant messages or invitations to IM during the active IM session. indicates a new group message. indicates a read group message. indicates a new instant message. indicates a read instant message. indicates an invitation. The icons and texts on the display depends on the IM service. Online shows the number of contacts that are online Offline shows the number of contacts that are offline To start a conversation, expand the Online or the Offline folder, scroll to the contact with whom you would like to chat, and select Chat. To 34 RM-209_en_1_FCC.fm Page 35 Thursday, September 7, 2006 12:18 PM M e s s a g i n g answer an invitation, or to reply to a message, expand the Conversations folder, scroll to the contact to whom you would like to chat, and select Open. To add contacts, see Add IM contacts, p. 36. Groups > Public groups (not visible if groups are not supported by the network) The list of bookmarks to public groups provided by the service provider is displayed. To start a IM session with a group, scroll to a group, and select Join. Enter the screen name that you want to use as your nickname in the conversation. When you have successfully joined the group conversation, you can start a group conversation. You can create a private group. See Groups, p. 36. Search > Users or Groups to search for other IM users or public groups on the network by phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a member in the group, or by group name, topic, or ID. Options > Chat or Join group to start the conversation when you have found the user or the group that you want Accept or reject an invitation If you receive a new invitation, to read it, select Read. If more than one invitation is received, select an invitation and Open. To join the private group conversation, select Accept, and enter the screen name you want to use as your nickname. To reject or delete the invitation, select Options > Reject or Delete. Read an instant message If you receive a new message that is not a message associated with an active conversation, New instant message is displayed. To read it, select Read. If more than one message is received, select a message and Open. New messages received during an active conversation are held in IMs >
Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed. To save a new contact that is not in the phone memory, select Options > Save contact. DRAFT 35 RM-209_en_1_FCC.fm Page 36 Thursday, September 7, 2006 12:18 PM M e s s a g i n g Participate in a conversation To join or start an IM session, write your message, and select Send. If you receive a new message during a conversation from a person who is not taking part in the current conversation, is displayed, and the phone sounds an alert tone. Write your message, and select Send. Your message is displayed, and the reply message is displayed below your message. Add IM contacts When connected to the IM service, in the IM main menu, select Options > Add contact > By mobile number, Enter ID manually, Search from server, or Copy from server (depending on service provider). Scroll to a contact. To start a conversation, select Chat. DRAFT Block or unblock messages When you are in a conversation and want to block messages, select Options > Block contact. To block messages from a specific contact in your contacts list, scroll to the contact in Conversations, Online, or Offline, and select Options >
Block contact > OK. To unblock a contact, in the IM main menu, select Options > Blocked list. Scroll to the contact you want to unblock, and select Unblock > OK. Groups You can use the public groups provided by the service provider, or create your own private groups for an IM conversation. Public You can bookmark public groups that your service provider may maintain. Connect to the IM service, and select Groups > Public groups. Select a group and Join. If you are not in the group, enter your screen name as your nickname for the group. To delete a group from your list, select Options > Delete group. To search for a group, select Groups > Public groups > Search groups. 36 RM-209_en_1_FCC.fm Page 37 Thursday, September 7, 2006 12:18 PM M e s s a g i n g Private Connect to the IM service, and from the main menu, select Options >
Create group. Enter the name for the group and the screen name that you want to use as your nickname. Mark the private group members in the contacts list, and write an invitation. indicates new voice messages. To call Voice messages The voice mailbox is a network service to which you may need to subscribe. For more information contact your service provider. To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice msgs.. To enter, search for, or edit your voice mailbox number, select Voice mailbox no.. If supported by the network, your voice mailbox number, select Listen. DRAFT Info messages You can receive messages on various topics from your service provider
(network service). For more information, contact your service provider. Select Menu > Messaging > Info messages and from the available options. Service commands Write and send service requests (USSD commands) to your service provider, such as activation commands for network services. Select Menu > Messaging > Serv. commands. Delete messages To delete messages, select Menu > Messaging > Delete messages > By message to delete single messages, By folder to delete all messages from a folder, or All messages. 37 RM-209_en_1_FCC.fm Page 38 Thursday, September 7, 2006 12:18 PM M e s s a g i n g SIM messages SIM messages are specific text messages that are saved to your SIM card. You can copy or move those messages from the SIM to the phone memory, but not vice versa. To read SIM messages, select Menu >
Messaging > Options > SIM messages. Message settings General settings General settings are common for text and multimedia messages. Select Menu > Messaging > Message settings > General settings and from the following options:
Save sent messages > Yes to set the phone to save the sent messages in the Sent items folder Overwriting in Sent > Allowed to set the phone to overwrite the old sent messages with the new ones when the message memory is full. This setting is shown only if you set Save sent messages > Yes. Font size to select the font size used in messages Graphical smileys > Yes to set the phone to replace character-based smileys with graphical ones DRAFT Text messages The text message settings affect the sending, receiving, and viewing of text and SMS e-mail messages. Select Menu > Messaging > Message settings > Text messages and from the following options:
Delivery reports > Yes to ask the network to send delivery reports about your messages (network service) Message centres > Add centre to set the phone number and name of the message center that is required for sending text messages. You receive this number from your service provider. Msg. centre in use to select the message center in use 38 RM-209_en_1_FCC.fm Page 39 Thursday, September 7, 2006 12:18 PM M e s s a g i n g E-mail msg. centres > Add centre to set the phone numbers and name of the e-mail center for sending SMS e-mails. E-mail centre in use to select the SMS e-mail message center in use Message validity to select the length of time for which the network attempts to deliver your message Messages sent via to select the format of the messages to be sent:
Text, Paging, or Fax (network service) Use packet data > Yes to set GPRS as the preferred SMS bearer Character support > Full to select all characters in the messages to be sent as viewed. If you select Reduced, characters with accents and other marks may be converted to other characters. Rep. via same centre > Yes to allow the recipient of your message to send you a reply using your message center (network service) DRAFT Multimedia messages The message settings affect the sending, receiving, and viewing of multimedia messages. You may receive the configuration settings for multimedia messaging as a configuration message. See Configuration settings service, p. 10. You can also enter the settings manually. See Configuration, p. 55. Select Menu > Messaging > Message settings > Multimedia messages and from the following options:
Delivery reports > Yes to ask the network to send delivery reports about your messages (network service) Img. size (MMS plus) to set the image size in multimedia plus messages Image size (MMS) to set the image size in multimedia messages Default slide timing to define the default time between slides in multimedia messages Allow MMS receptn. > Yes or No to receive or block the multimedia message. If you select In home network, you cannot receive multimedia messages when outside your home network. The default setting of the 39 RM-209_en_1_FCC.fm Page 40 Thursday, September 7, 2006 12:18 PM M e s s a g i n g multimedia message service is generally In home network. The availability of this menu depends on your phone. Incoming MMS msgs. to allow the reception of multimedia messages automatically, manually after being prompted, or to reject the reception. This setting is not shown if Allow MMS receptn. is set to No. Allow adverts to receive or reject advertisements. This setting is not shown if Allow MMS receptn. is set to No, or Incoming MMS msgs. is set to Reject. Configuration sett. > Configuration Only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal config. for multimedia messaging. Select Account and a MMS account contained in the active configuration settings. DRAFT E-mail messages The settings affect the sending, receiving, and viewing of e-mail. You may receive the settings as a configuration message. See Configuration settings service, p. 10. You can also enter the settings manually. See Configuration, p. 55. Select Menu > Messaging > Message settings > E-mail messages and from the following options:
Configuration to select the set that you want to activate Account to select an account provided by the service provider My name to enter your name or nickname E-mail address to enter your e-mail address Login information to enter information according to the server type Incoming mail sett. to select the maximum number of e-mails to be retrieved Outgoing sett. (SMTP) to enter SMTP (simple mail transfer protocol) settings Displ. term. window > Yes to perform manual user authentication for intranet connections 40 RM-209_en_1_FCC.fm Page 41 Thursday, September 7, 2006 12:18 PM 7. Contacts C o n t a c t s
. You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image for a limited number of contacts. The SIM card memory can save names with one phone number attached to them. The contacts saved in the SIM card memory are indicated by DRAFT Search for a contact Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the first characters of the name you are searching for. Save names and phone numbers Names and numbers are saved in the used memory. To save a name and phone number, select Menu > Contacts > Names > Options > Add new contact. Save details In the phone memory, you can save different types of phone numbers, a tone or a video clip, and short text items for a contact. The first number you save is automatically set as the default number and is indicated with a frame around the number type indicator (for example, make a call), the default number is used unless you select another number. Make sure that the memory in use is Phone or Phone and SIM. See Settings, p. 43. Search for the contact to which you want to add a detail, and select Details > Options > Add detail. Select from the options available.
). When you select a name from contacts (for example, to 41 RM-209_en_1_FCC.fm Page 42 Thursday, September 7, 2006 12:18 PM C o n t a c t s Copy or move contacts To copy or move a contact from the phone contact memory to the SIM card memory, or vice versa, select Menu > Contacts > Names. Select the contact to copy or move and Options > Copy contact or Move contact. To copy or move several contacts, select the first contact to copy or move and Options > Mark. Mark the other contacts, and select Options > Copy marked or Move marked. To copy or move all contacts from the phone contact memory to the SIM card memory, or vice versa, select Menu > Contacts > Copy contacts or Move contacts. The SIM card memory can save names with one phone number attached to them. DRAFT Edit contact details Search for the contact, and select Details. To edit a name, number, or text item or to change the image, select Options > Edit. To change the number type, scroll to the desired number, and select Options > Change type. To set the selected number as the default number, select Set as default. Synchronize all Synchronize your calendar, contacts data, and notes with a remote Internet server (network service). For details see Synchronize from a server, p. 52. Delete contacts To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Del. all contacts > From phone memory or From SIM card. To delete a contact, search for the desired contact, and select Options >
Delete contact. 42 RM-209_en_1_FCC.fm Page 43 Thursday, September 7, 2006 12:18 PM To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete and from the options available. C o n t a c t s Business cards You can send and receive a persons contact information from a compatible device that supports the vCard standard as a business card. To send a business card, search for the contact whose information you want to send, and select Details > Options > Send business card. When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes. DRAFT Settings Select Menu > Contacts > Settings and from the following options:
Memory in use to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall names and number from both memories. In that case, when you save names and numbers, they are saved in the phone memory. Contacts view to select how the names and numbers in Contacts are displayed Name display to select whether the contacts first or last name is displayed first Font size to set the font size for the list of contacts Memory status to view the free and used memory capacity Groups Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images. 43 RM-209_en_1_FCC.fm Page 44 Thursday, September 7, 2006 12:18 PM C a l l l o g Speed dials To assign a number to a speed-dialing key, select Menu > Contacts >
Speed dials, and scroll to the speed-dialing number that you want. Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. See also Speed dialling in Call, p. 53. To make a call using the speed-dialing keys, see Speed dialing, p. 21. Info, service, and my numbers Select Menu > Contacts and from one of these submenus:
Info numbers to call the information numbers of your service provider if the numbers are included on your SIM card (network service) Service numbers to call the service numbers of your service provider if the numbers are included on your SIM card (network service) My numbers to view the phone numbers assigned to your SIM card, if the numbers are included on your SIM card DRAFT The phone registers your missed, received, and dialed calls if the network supports it and the phone is switched on and within the network service area. To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Msg. recipients. To view the approximate information on your recent communications, select Menu > Log > Call duration, Data counter, or Pack. data timer. To view how many text and multimedia messages you have sent and received, select Menu > Log > Message log. 8. Call log 44 RM-209_en_1_FCC.fm Page 45 Thursday, September 7, 2006 12:18 PM S e t t i n g s Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. Some timers may be reset during service or software upgrades. Location information The network may send you a location request (network service). Contact your service provider to subscribe and to agree upon the delivery of location information. To accept or reject the location request, select Accept or Reject. If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your network operator or service provider. The phone displays 1 missed position request. To view the missed location request, select Show. To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all. DRAFT Profiles Your phone has various setting groups called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles, the desired profile and from the following options:
Activate to activate the selected profile Personalise to personalize the profile. Select the setting you want to change, and make the changes. Timed to set the profile to be active until a certain time (up to 24 hours) and set the end time. When the time set for the profile expires, the previous profile that was not timed becomes active. 9. Settings 45 RM-209_en_1_FCC.fm Page 46 Thursday, September 7, 2006 12:18 PM S e t t i n g s Themes A theme contains elements for personalizing your phone. Select Menu > Settings > Themes and from the following options:
Select theme to set a theme. A list of folders in Gallery opens. Open the Themes folder, and select a theme. Theme downloads to open a list of links to download more themes Tones You can change the tone settings of the selected active profile. Select Menu > Settings > Tones. You can find the same settings in the Profiles menu. See Personalise in Profiles, p. 45. To set the phone to ring only for calls from phone numbers that belong to a selected caller group, select Alert for. Scroll to the caller group you want or All calls, and select Mark. Select Options > Save to save the settings or Cancel to leave the settings unchanged. If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds. DRAFT Display Select Menu > Settings > Display and from the available options:
Wallpaper to add the background image in the standby mode Active standby to switch the active standby mode on or off and to organize and personalize the active standby mode Standby font colour to select the color for the texts in the standby mode Navigation key icons to display the icons of the current scroll key shortcuts in the standby mode when active standby is off Swivel animation to set your phone to display an animation and sound a tone when you open and close the phone depending on the theme 46 RM-209_en_1_FCC.fm Page 47 Thursday, September 7, 2006 12:18 PM S e t t i n g s Screen saver > On to set your phone to display a screen saver. To download more screen savers, select Graphic downloads. To set the time after which the screen saver is activated, select Time-out. Power saver to save some battery power. The date and a digital clock are displayed when no function of the phone is used for a certain time. Sleep mode to save some battery power. The display turns completely black when no function of the phone is used for a certain time. Font size to set the font size for messaging, contacts, and web pages Operator logo to set your phone to display or hide the operator logo Cell info display > On to display the cell identity, if available from the network DRAFT Time and date To change the clock type, time, time zone, and date settings, select Menu > Settings > Time and date > Time, Date, or Auto-update of time
(network service). When traveling to a different time zone, select Menu > Settings > Time and date > Time > Time zone and the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT) or Universal Time Coordinated (UTC). The time and date are set according to the time zone and enable your phone to display the correct sending time of received text or multimedia messages. For example, GMT -5 denotes the time zone for New York (USA), 5 hours west of Greenwich, London (UK). My shortcuts With personal shortcuts you get quick access to often used functions of the phone. Left selection key To select a function from the list, select Menu > Settings > My shortcuts > Left selection key. 47 RM-209_en_1_FCC.fm Page 48 Thursday, September 7, 2006 12:18 PM S e t t i n g s If the left selection key is Go to to activate a function, in the standby mode, select Go to > Options and from the following options:
Select options to add a function to the shortcut list or to remove one Organise to rearrange the functions on your personal shortcut list Right selection key To select a function from the list, select Menu > Settings > My shortcuts > Right selection key. Navigation key To assign other phone functions from a predefined list to the navigation key (scroll key), select Menu > Settings > My shortcuts > Navigation key. DRAFT Voice commands To call contacts and carry out phone functions, say the voice commands. Voice commands are language-dependent. To set the language, see Recognition lang. in Phone, p. 54. To select the phone functions to activate with a voice commands, select Menu > Settings > My shortcuts > Voice commands and a folder. Scroll to a function. indicates that the voice tag is activated. To activate the voice tag, select Add. To play the activated voice command, select Play. To use voice commands, see Enhanced voice dialing, p. 21. To manage the voice commands, scroll to a phone function, and select from the following options:
Edit or Remove to change or deactivate the voice command of the selected function Add all or Remove all to activate or deactivate voice commands to all functions in the voice commands list 48 RM-209_en_1_FCC.fm Page 49 Thursday, September 7, 2006 12:18 PM S e t t i n g s Connectivity You can connect the phone to a compatible device using a Bluetooth wireless technology or a USB data cable connection. You can also define the settings for EGPRS dial-up connections. DRAFT Bluetooth wireless technology This device is compliant with Bluetooth Specification 2.0 + EDR supporting the following profiles: generic access, network access, generic object exchange, hands-free, headset, object push, file transfer, dial-up networking, SIM access, and serial port. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. Features using Bluetooth technology or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life. Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth technology communicate using radio waves, your phone and the other devices do not need to be in direct line-of-sight, although the connection can be subject to interference from obstructions such as walls or from other electronic devices. Set up a Bluetooth connection Select Menu > Settings > Connectivity > Bluetooth and from the following options:
Bluetooth > On or Off to activate or deactivate the Bluetooth function. Search audio enhanc. to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone. Paired devices to search for any Bluetooth device in range. Select New to list any Bluetooth device in range. Select a device and Pair. Enter an agreed Bluetooth passcode of the device (up to 16 characters) to pair indicates that Bluetooth is activated. 49 RM-209_en_1_FCC.fm Page 50 Thursday, September 7, 2006 12:18 PM S e t t i n g s the device to your phone. You must only give this passcode when you connect to the device for the first time. Your phone connects to the device, and you can start data transfer. Bluetooth wireless connection Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth connection is currently active, select Active devices. To view a list of Bluetooth devices that are currently paired with the phone, select Paired devices. Bluetooth settings To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > My phone's visibility or My phone's name. If you are concerned about security, turn off the Bluetooth function, or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others with whom you agree. DRAFT Packet data General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an Internet protocol
(IP)-based network. To define how to use the service, select Menu > Settings >
Connectivity > Packet data > Packet data conn. and from the following options:
When needed to set the packet data connection to established when an application needs it. The connection will be closed when the application is terminated. Always online to set the phone to automatically connect to a packet data network when you switch the phone on Modem settings You can connect the phone using Bluetooth wireless technology or USB data cable connection to a compatible PC and use the phone as a modem to enable GPRS connectivity from the PC. 50 RM-209_en_1_FCC.fm Page 51 Thursday, September 7, 2006 12:18 PM S e t t i n g s To define the settings for connections from your PC, select Menu >
Settings > Connectivity > Packet data > Packet data settings > Active access point, and activate the access point you want to use. Select Edit active access pt. > Alias for access point, enter a name to change the access point settings, and select OK. Select Packet data acc. pt., enter the access point name (APN) to establish a connection to an network, and select OK. You can also set the EGPRS dial-up service settings (access point name) on your PC using the Nokia Modem Options software. See Nokia PC Suite, p. 79. If you have set the settings both on your PC and on your phone, the PC settings are used. DRAFT Data transfer Synchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service). Your phone allows data transfer with a compatible PC or another compatible device when using the phone without a SIM card. Transfer contact list To copy or synchronize data from your phone, the name of the device and the settings must be in the list of transfer contacts. If you receive data from another device (for example, a compatible mobile phone), the corresponding transfer contact is automatically added to the list, using the contact data from the other device. Server sync and PC synchronisation are the original items in the list. To add a new transfer contact to the list (for example, a mobile phone), select Menu > Settings > Connectivity > Data transfer > Options > Add transfer contact > Phone synchronisation or Phone copy, and enter the settings according to the transfer type. To edit the copy and synchronize settings, select a contact from the transfer contact list and Options > Edit. To delete a transfer contact, select it from the transfer contact list and Options > Delete. 51 RM-209_en_1_FCC.fm Page 52 Thursday, September 7, 2006 12:18 PM S e t t i n g s Data transfer with a compatible device For synchronization use Bluetooth wireless technology or a cable connection. The other device must be activated for receiving data. To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer contact from the list other than Server sync or PC synchronisation. According to the settings, the selected data is copied or synchronized. Synchronize from a compatible PC To synchronize data from calendar, notes, and contacts, install the Nokia PC Suite software of your phone on the PC. Use Bluetooth wireless technology or a USB data cable for the synchronization, and start the synchronization from the PC. Synchronize from a server To use a remote Internet server, subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. See Configuration settings service, p. 10 and Configuration, p. 55. To start the synchronization from your phone, select Menu > Settings >
Connectivity > Data transfer > Server sync. Depending on the settings, select Initialising synchronisation or Initialising copy. Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete. DRAFT USB data cable You can use the USB data cable to transfer data between the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite. To activate the phone for data transfer or image printing, connect the data cable. Confirm USB data cable connected. Select mode. and select from the following options:
Nokia mode to use the cable for PC Suite 52 RM-209_en_1_FCC.fm Page 53 Thursday, September 7, 2006 12:18 PM S e t t i n g s Printing & media to use the phone with a PictBridge compatible printer or with your compatible PC Data storage to connect to a PC that does not have Nokia software and use the phone as a data storage device To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Nokia mode, Printing & media, or Data storage. DRAFT Call Select Menu > Settings > Call and from the following options:
Call divert to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See Call barring service in Security, p. 56. Voice clarity > Active to enhance speech intelligibility especially in noisy environments Anykey answer > On to answer an incoming call by briefly pressing any key, except the power key, the camera key, the left and right selection keys, or the end key Automatic redial > On to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt Speed dialling > On to dial the names and phone numbers assigned to the speed-dialing keys 2 to 9 by pressing and holding the corresponding number key Call waiting > Activate to have the network notify you of an incoming call while you have a call in progress (network service). See Call waiting, p. 22. Summary after call > On to briefly display the approximate duration and cost (network service) of the call after each call Send my caller ID > Yes to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network. Outgoing call line to select the phone line 1 or 2 for making calls if supported by your SIM card (network service). 53 RM-209_en_1_FCC.fm Page 54 Thursday, September 7, 2006 12:18 PM S e t t i n g s Swivel call handling to set the phone to answer calls when you open the phone and to end calls when you close the phone DRAFT Phone Select Menu > Settings > Phone and from the following options:
Language settings To set the display language of your phone, select Phone language. Automatic selects the language according to the information on the SIM card. To select the USIM card language, select SIM language. To set a language for voice commands, select Recognition lang.. Security keyguard to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. Automatic keyguard to lock the keypad automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and set the time. Welcome note to write the note that is shown when the phone is switched on Flight query > On The phone asks every time when it is switched on whether the flight profile shall be used. With flight profile all radio connections are switched off. The flight profile should be used in areas sensitive to radio emissions. Phone updates to receive phone software updates from your service provider (network service). This option may not be available, depending on your phone. See Phone software updates, p. 57. Operator selection > Automatic to set the phone to automatically select one of the cellular networks available in your area. With Manual you can select a network that has a roaming agreement with your service provider. Confirm SIM actions See SIM services, p. 78. Help text activation to select whether the phone shows help texts Start-up tone > On The phone plays a tone when it is switched on. 54 RM-209_en_1_FCC.fm Page 55 Thursday, September 7, 2006 12:18 PM S e t t i n g s Enhancements This menu or the following options are shown only if the phone is or has been connected to a compatible mobile enhancement. Select Menu > Settings > Enhancements. Select an enhancement, and depending on the enhancement, from the following options:
Default profile to select the profile that you want to be automatically activated when you connect to the selected enhancement Automatic answer to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off. Lights to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a key press. Text phone > Use text phone > Yes to use the text phone settings instead of headset or loopset settings If your phone is provided with a hearing aid coil, select Hearing aid > T-
coil hrng. aid mode > On to optimize the sound quality when using a t-coil hearing aid. The is active. DRAFT Configuration You can configure your phone with settings that are required for certain services to function correctly. Your service provider may also send you these settings. See Configuration settings service, p. 10. Select Menu > Settings > Configuration and from the following options:
Default config. sett. to view the service providers saved in the phone. To set the configuration settings of the service provider as default settings, select Options > Set as default. Activ. def. in all apps. to activate the default configuration settings for supported applications Preferred access pt. to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the icon is shown when the T-coil hrng. aid mode 55 RM-209_en_1_FCC.fm Page 56 Thursday, September 7, 2006 12:18 PM S e t t i n g s DRAFT service provider, data bearer, and packet data access point or GSM dial-up number. Connect to support to download the configuration settings from your service provider Device manager sett. to allow or prevent the phone from receiving phone software updates. This option may not be available, depending on your phone. See Phone software updates, p. 57. Personal config. sett. to add new personal accounts for various services manually and to activate or delete them. To add a new personal account if you have not added any, select Add; otherwise, select Options > Add new. Select the service type, and select and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate. Security When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may be possible to the official emergency number programmed into your device. Select Menu > Settings > Security and from the following options:
PIN code request and UPIN code request to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off. PIN2 code request to select whether the PIN2 code is required when using a specific phone feature which is protected by the PIN2 code. Some SIM cards do not allow the code request to be turned off. Call barring service to restrict incoming calls to and outgoing calls from your phone (network service). A barring password is required. Fixed dialling to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card. When the fixed dialing is on, GPRS connections are not possible except while sending text messages over a GPRS connection. In this case, the recipients phone number and the message center number must be included in the fixed dialing list. 56 RM-209_en_1_FCC.fm Page 57 Thursday, September 7, 2006 12:18 PM S e t t i n g s Closed user group to specify a group of people whom you can call and who can call you (network service) Security level > Phone to set the phone to ask for the security code whenever a new SIM card is inserted into the phone. If you select Memory, the phone asks for the security code when the SIM card memory is selected, and you want to change the memory in use. Access codes to change the security code, PIN code, UPIN code, PIN2 code, or barring password Code in use to select whether the PIN code or UPIN code should be active Authority certificates or User certificates to view the list of the authority or user certificates downloaded into your phone. See Certificates, p. 77. Security module sett. to view Secur. module details, activate Module PIN request, or change the module PIN and signing PIN. See also Access codes, p. 9. DRAFT Phone software updates Your service provider may send phone software updates over the air directly to your device (network service). This option may not be available, depending on your phone. Restore factory settings To reset some of the menu settings to their original values, select Menu > Settings > Rest. factory sett.. Enter the security code. The names and phone numbers saved in Contacts are not deleted. Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the update is completed and the device is restarted. Be sure to backup data before accepting a software update. 57 RM-209_en_1_FCC.fm Page 58 Thursday, September 7, 2006 12:18 PM O p e r a t o r m e n u Settings To allowed or disallow phone software updates, select Menu >
Settings > Configuration > Device manager sett. >
Serv. softw. updates and following options:
Always allow to perform all software downloads and updates automatically Always reject to reject all software updates Confirm first to perform software downloads and updates only after your confirmation (default setting) Request a software update Select Menu > Settings > Phone > Phone updates to request available phone software updates from your service provider. Select Current softw. details to display the current software version and check whether an update is needed. Select Downl. phone softw. to download and install a phone software update. Follow the instructions on the display. DRAFT Install a software update Select Install softw. update to start the installation, when the installation was cancelled after the download. The software update may take several minutes. If there are problems with the installation, contact your service provider. 10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information contact your network operator. The operator can update this menu with a service message. For more information, see Service inbox, p. 75. 58 RM-209_en_1_FCC.fm Page 59 Thursday, September 7, 2006 12:18 PM G a l l e r y 11. Gallery In this menu you can manage images, video clips, music files, themes, graphics, tones, recordings, and received files. These files are stored in the phone memory or an attached microSD memory card and may be arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. To see the list of folders, select Menu > Gallery. To see the available options of a folder, select a folder and Options. To view the list of files in a folder, select a folder and Open. To see the available options of a file, select a file and Options. To view the folders of the memory card when moving a file, scroll to the memory card, and press the scroll key right. DRAFT Print images Your device supports Nokia XPressPrint. To connect it to a compatible printer use a data cable or send the image using Bluetooth to a printer supporting Bluetooth technology. See Connectivity, p. 49. You can print images that are in the JPEG format. The images taken with the camera are automatically saved in the JPEG format. Select the image you want to print and Options > Print. Memory card Keep all memory cards out of the reach of small children. You can use the microSD memory card to store your multimedia files such as video clips, music tracks, and sound files, images, and messaging data. 59 RM-209_en_1_FCC.fm Page 60 Thursday, September 7, 2006 12:18 PM G a l l e r y Some of the folders in Gallery with content that the phone uses (for example, Themes) may be stored on the memory card. To insert and remove the microSD memory card, see Insert a microSD card, p. 12. Format the memory card When a memory card is formatted, all data on the card is permanently lost. Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it. To format a memory card, select Menu >Gallery or Applications, the
, and Options > Format memory card > Yes. memory card folder When formatting is complete, enter a name for the memory card. DRAFT Lock the memory card To set a password to lock your memory card to help prevent unauthorized use, select Options > Set password. The password can be up to eight characters long. The password is stored in your phone, and you do not have to enter it again while you are using the memory card on the same phone. If you want to use the memory card on another phone, you are asked for the password. To delete the password, select Options > Delete password. Check memory consumption To check the memory consumption of different data groups and the available memory for installing new applications or software on your memory card, select Options > Details. 60 RM-209_en_1_FCC.fm Page 61 Thursday, September 7, 2006 12:18 PM M e d i a 12. Media When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others including copyrights. Camera and video You can take images or record video clips with the built-in camera. DRAFT Take an image To have the still image function, press the camera key in the standby mode, select Menu > Media > Camera, or if the video function is on, scroll left or right. To take an image in landscape format, hold the phone in a horizontal position. To zoom in and out in the camera mode, press the scroll key up and down or the volume keys. To take an image, select Capture, or press the camera key. The phone saves the images on the memory card. Select Options to set Night mode on if the lighting is dim, Self-timer on to activate the self-timer, or Img. sequence on to take images in a fast sequence. With the highest image size setting three images are taken in a sequence; with other size settings five images are taken. Select Options > Settings > Image preview time and a preview time to display captured. During the preview time, select Back to take another image or Send to send the image as a multimedia message. Your device supports an image capture resolution of 1280 x 960 pixels. The image resolution in these materials may appear different. 61 RM-209_en_1_FCC.fm Page 62 Thursday, September 7, 2006 12:18 PM M e d i a Record a video clip To have the video function, press and hold the camera key in the standby mode, and select Menu > Media > Video or if the camera function is on, scroll left or right. To start the video recording, select Record. To pause the recording, select Pause; to resume the recording, select Continue; to stop the recording, select Stop. The phone saves the video clips on the memory card or the phone memory. Camera and video options To use a filter, select Options > Effects > False colours, Greyscale, Sepia, Negative, or Solarise. To adopt the camera to the light conditions, select Options > White balance > Auto, Daylight, Tungsten or Fluorescent. To change other camera and video settings and to select the image and video storage select Options > Settings. DRAFT Media player With the media player you can view, play, and download files, such as images, audio, video, and animated images. You can also view compatible streaming videos from a network server (network service). Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address, or Media downloads to select or download media. Select Menu > Media > Media player > FF/Rew interval to set the step width for fast forward or rewind. Configuration for a streaming service You may receive the configuration settings required for streaming as a configuration message from the service provider. See Configuration settings service, p. 10. You can also enter the settings manually. See Configuration, p. 55. To activate the settings, do the following:
1. Select Menu > Media > Media player > Streaming settings >
Configuration. 2. Select a service provider, Default, or Personal config. for streaming. 62 RM-209_en_1_FCC.fm Page 63 Thursday, September 7, 2006 12:18 PM 3. Select Account and a streaming service account contained in the active configuration settings. M e d i a Playing the music tracks Music player Your phone includes a music player for listening to music tracks or other MP3 or AAC sound files that you have downloaded from the Web or transferred to the phone with Nokia PC Suite. See Nokia PC Suite, p. 79. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. Music files stored in the music folder in the phone memory or on the memory card will automatically be detected and added to the music library during the startup of the phone. To open the music player, select Menu > Media > Music player. DRAFT Operate the music player with the virtual keys on the display. When you open the Music player menu, the details of the first track on the default track list are shown. To start playing, select To adjust the volume level, use the volume keys on the side of the phone. To pause the playing, select To skip to the next track, select previous track, select To rewind the current track, select and hold current track, select and hold want. To stop the music player, select Back. Warning! Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. To fast forward the
. Release the key at the position you
. To skip to the beginning of the
. 63 RM-209_en_1_FCC.fm Page 64 Thursday, September 7, 2006 12:18 PM M e d i a Music player options In the Music player menu, select from the following options:
Show tracks View all available tracks of the active track list and play the desired track. To play a track, scroll to the desired track, and select Play. Music library View all available tracks ordered according to Artists, Albums, Genres, Composers, or Track lists. Select Update library to refresh the lists. Track lists generated with the Nokia Music Manager you will find under Track lists > My track lists. Play options Select Random to play the tracks on the track list in random order. Select Repeat to play the current track or the entire track list repeatedly. Media equaliser to select or define an equalizer setting Add to Favourites to add the current track to the favorite track list Play via Bluetooth to connect and play the tracks on an audio accessory using Bluetooth technology Use tone Set the currently played music track, for example, as a ringing tone. Send to send the current track by a multimedia message or using Bluetooth technology Web page to access a Web page associated with the currently played track Music downloads to connect to a Web service Memory status to view the free and used memory capacity DRAFT Radio The FM radio depends on an antenna other than the wireless devices antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. 64 RM-209_en_1_FCC.fm Page 65 Thursday, September 7, 2006 12:18 PM Select Menu > Media > Radio. To use the graphical keys
, right to the desired key, and select it.
,
, or on the display, scroll left or M e d i a Save radio frequencies 1. To start the search, select and hold
. or 3. Enter the name of the radio station. To change the radio or
, or press the headset key. To select a radio station, briefly or frequency in 0.05 MHz steps, briefly press Listen to the radio Select Menu > Media > Radio. To scroll to the desired frequency, select 2. To save a frequency to a memory location, 1 to 9, press and hold the corresponding number key. To save a frequency to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9. DRAFT press the corresponding number keys. To adjust the volume, press the volume keys. Select from the following Options:
Switch off to turn off the radio Loudspeaker or Headset to listen to the radio using the loudspeaker or headset. Keep the headset connected to the phone. The lead of the headset functions as the radio antenna. Mono output or Stereo output to listen to the radio in monophonic sound or in stereo Stations to select the list of saved stations. To delete or rename a station, scroll to the desired station, and select Options > Delete station or Rename. Search all stations to search automatically the available stations at your location Set frequency to enter the frequency of the desired radio station Station directory to access a Web site with a list of radio stations 65 RM-209_en_1_FCC.fm Page 66 Thursday, September 7, 2006 12:18 PM M e d i a When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio.
, on the display, scroll left or 2. To start the recording, select To use the graphical keys
, or right to the desired key, and select it. Record sound 1. Select Menu > Media > Voice recorder. Voice recorder You can record pieces of speech, sound, or an active call, and save them in Gallery. This is useful when recording a name and phone number to write down later. The recorder cannot be used when a data call or GPRS connection is active. To start the recording during a call, select Options > Record. While recording a call, all parties to the call hear a faint beeping. When recording a call, hold the phone in the normal position near to your ear. To pause the recording, select DRAFT Recordings. To listen to the latest recording, select Options > Play last recorded. To send the last recording, select Options > Send last recorded. To see the list of recordings in Gallery, select Options > Recordings list > Recordings. Equalizer You can control the sound quality when using the music player by amplifying or diminishing frequency bands. Select Menu > Media > Equaliser. To activate a set, scroll to one of the equalizer sets, and select Activate. To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed. The recording is saved in Gallery >
3. To end the recording, select 66 RM-209_en_1_FCC.fm Page 67 Thursday, September 7, 2006 12:18 PM O r g a n i z e r Stereo widening Stereo widening enhances the audio output of the phone by enabling a wider stereo sound effect. To change the setting, select Menu >
Media > Stereo widening. 13. Organizer Alarm clock You can set the phone to alarm at a desired time. Select Menu >
Organiser > Alarm clock. To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set the radio as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone. To set a snooze time-out, select Snooze time-out and the time. DRAFT Stop the alarm The phone sounds an alert tone, and flashes Alarm! and the current time on the display, even if the phone was switched off. To stop the alarm, select Stop. If you let the phone continue to sound the alarm for a minute or select Snooze, the alarm stops for the time you set in Snooze time-out, then resumes. If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. 67 RM-209_en_1_FCC.fm Page 68 Thursday, September 7, 2006 12:18 PM O r g a n i z e r Meeting, Calendar Select Menu > Organiser > Calendar. The current day is indicated by a frame. If there are any notes set for the day, the day is in bold type, and the beginning of the note is shown below the calendar. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes. In Settings you can set the date, time, time zone, date or time format, date separator, default view, or the first day of the week. In Auto-delete notes you can set the phone to delete old notes automatically after a specified time. DRAFT Note alarm The phone displays the note and if set, sounds a tone. With a call note on the display, to call the displayed number, press the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select Snooze. To stop the alarm without viewing the note, select Exit. Make a calendar note Select Menu > Organiser > Calendar. Scroll to the date, and select Options > Make a note and one of the following note types:
To-do list To save a note for a task that you must do, select Menu > Organiser >
To-do list. To make a note if no note is added, select Add; otherwise, select Options > Add. Fill in the fields, and select Save. To view a note, scroll to it, and select View. While viewing a note, you can also select an option to edit the attributes. You can also select an Reminder. Fill in Memo, or Birthday, the fields. Call, 68 RM-209_en_1_FCC.fm Page 69 Thursday, September 7, 2006 12:18 PM option to delete the selected note and delete all the notes that you have marked as done. O r g a n i z e r Note: This calculator has limited accuracy and is designed for simple calculations. Notes To write and send notes, select Menu > Organiser > Notes. To make a note if no note is added, select Add; otherwise, select Options > Make a note. Write the note, and select Save. Select Menu > Organiser > Calculator. Press # for a decimal point. Scroll to the desired operation or function, or select it from the Options. To save the exchange rate, select Options > Exchange rate. Calculator The calculator in your phone provides basic arithmetic and trigonometric functions, calculates the square and the square root, the inverse of a number, and converts currency values. DRAFT Countdown timer To start the countdown timer, select Menu > Organiser > Countd. timer > Normal timer, enter the alarm time, and write a note text that is displayed when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer. To have an interval timer with up to 10 intervals started, enter the intervals. Select Menu > Organiser > Countd. timer > Interval timer. To start the timer, select Start timer > Start. Stopwatch You can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key. 69 RM-209_en_1_FCC.fm Page 70 Thursday, September 7, 2006 12:18 PM A p p l i c a t i o n s Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Select Menu > Organiser > Stopwatch and from the following options:
Split timing to take intermediate times. To start the time observation, select Start. Select Split every time that you want to take an intermediate time. To stop the time observation, select Stop. To save the measured time, select Save. To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset. Lap timing to take lap times Continue to view the timing that you have set in the background Show last to view the most recently measured time if the stopwatch is not reset View times or Delete times to view or delete the saved times DRAFT In this menu you can manage applications and games. These files are stored in the phone memory or an attached microSD memory card and may be arranged in folders. For options to format or lock and unlock the memory card see Memory card, p. 59. 14. Applications Launch a game Your phone software includes some games. Select Menu > Applications > Games. Scroll to the desired game, and select Open. To set sounds, lights, and shakes for the game, select Menu >
Applications > Options > Application settings. For more options, see Application options, p. 71. 70 RM-209_en_1_FCC.fm Page 71 Thursday, September 7, 2006 12:18 PM A p p l i c a t i o n s Launch an application Your phone software includes some Java applications. Select Menu > Applications > Collection. Scroll to an application, and select Open. Download an application Your phone supports J2ME Java applications. Make sure that the application is compatible with your phone before downloading it. Application options Update version to check if a new version of the application is available for download from Web (network service) Application access to restrict the application from accessing the network Web page to provide further information or additional data for the application from an Internet page (network service), if available DRAFT You can download new Java applications and games in different ways. Use the Nokia Application Installer from PC Suite to download the applications to your phone, or select Menu > Applications > Options >
Downloads > App. downloads; the list of available bookmarks is shown. See Bookmarks, p. 73. For the availability of different services, pricing, and tariffs, contact your service provider. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. 71 RM-209_en_1_FCC.fm Page 72 Thursday, September 7, 2006 12:18 PM W e b 15. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language
(XHTML) on their pages. Appearance may vary due to screen size. You may not be able to view all details of the Internet pages. DRAFT Set up browsing You may receive the configuration settings required for browsing as a configuration message from the service provider that offers the service that you want to use. See Configuration settings service, p. 10. You can also enter all the configuration settings manually. See Configuration, p. 55. Connect to a service Ensure that the correct configuration settings of the service are activated. 1. To select the settings for connecting to the service, select Menu >
Web > Settings > Configuration sett.. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal config. for browsing. See Set up browsing, p. 72. 3. Select Account and a browsing service account contained in the active configuration settings. 4. Select Displ. term. window > Yes to perform manual user authentication for intranet connections. 72 RM-209_en_1_FCC.fm Page 73 Thursday, September 7, 2006 12:18 PM W e b Make a connection to the service in one of the following ways:
Select Menu > Web > Home.
To select a bookmark of the service, select Menu > Web >
Bookmarks. address. Enter the address of the service, and select OK.
To select the last URL, select Menu > Web > Last web addr..
To enter the address of the service, select Menu > Web > Go to Browse pages After you make a connection to the service, you can start browsing its pages. The function of the phone keys may vary in different services. Follow the text guides on the phone display. For more information, contact your service provider. DRAFT Browse with phone keys To browse through the page, scroll in any direction. To select an item, press the call key, or select Select. To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *. Direct calling While browsing, you can make a phone call, and save a name and a phone number from a page. Bookmarks You can save page addresses as bookmarks in the phone memory. 1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks. 2. Scroll to a bookmark, and select it; or press the call key to make a connection to the page associated with the bookmark. 3. Select Options to view, edit, delete, or send the bookmark; to create a new bookmark; or to save the bookmark to a folder. 73 RM-209_en_1_FCC.fm Page 74 Thursday, September 7, 2006 12:18 PM W e b Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. Receive a bookmark When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To view the bookmark, select Show. DRAFT Appearance settings While browsing, select Options > Other options > Appearance settings;
or in the standby mode, select Menu > Web > Settings > Appearance settings and from the following options:
Text wrapping to select how the text shall appear on the display Font size to set the font size Show images > No to hide images on the page Alerts > Alert for unsec. conn. > Yes to set the phone to alert when a secure connection changes to an unsecure one during browsing Alerts > Alert for unsec. items > Yes to set the phone to alert when a secure page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see Browser security, p. 76. Character encoding > Content encoding to select the encoding for the browser page content Character encoding > Unicode (UTF-8) addr. > On to set the phone to send a URL as a UTF-8 encoding Screen size > Full or Small to set the screen layout JavaScript > Enable to enable the Java scripts 74 RM-209_en_1_FCC.fm Page 75 Thursday, September 7, 2006 12:18 PM Security settings W e b Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See Cache memory, p. 76. While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings >
Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject. Scripts over secure connection You can select whether to allow the running of scripts from a secure page. The phone supports WML scripts. While browsing, to allow the scripts, select Options > Other options >
Security > WMLScript settings; or in the standby mode, select Menu >
Web > Settings > Security settings > WMLScripts in conn. > Allow. DRAFT Service inbox The phone is able to receive service messages sent by your service provider (network service). Service messages are notifications (for example, news headlines), and they may contain a text message or an address of a service. To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox. To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate Download settings To automatically save all downloaded files in Gallery, select Menu >
Web > Settings > Downloading sett. > Automatic saving > On. 75 RM-209_en_1_FCC.fm Page 76 Thursday, September 7, 2006 12:18 PM W e b the browser and download the marked content, select Retrieve. To display detailed information on the service notification or delete the message, select Options > Details or Delete. Service inbox settings Select Menu > Web > Settings > Service inbox sett.. To set whether you want to receive service messages, select Service messages > On or Off. To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels. To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Autom. connection > On. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message. DRAFT Cache memory A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache. To empty the cache while browsing, select Options > Other options >
Clear the cache; in the standby mode, select Menu > Web > Clear the cache. Browser security Security features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider. 76 RM-209_en_1_FCC.fm Page 77 Thursday, September 7, 2006 12:18 PM W e b Certificates Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider. To view or change the security module settings, select Menu >
Settings > Security > Security module sett.. DRAFT The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct. Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. There are three kinds of certificates: server certificates, authority certificates, and user certificates. You may receive these certificates from your service provider. Authority certificates and user certificates may also be saved in the security module by the service provider. To view the list of the authority or user certificates downloaded into your phone, select Menu > Settings > Security > Authority certificates or User certificates. the phone and the content server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server. is displayed during a connection, if the data transmission between 77 RM-209_en_1_FCC.fm Page 78 Thursday, September 7, 2006 12:18 PM S I M s e r v i c e s is shown. Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page (for example, the title of the book you want to buy and its price). The text to sign is shown, which may include the amount and date. Check that the header text is Read and that the digital signature icon If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN. To sign the text, read all of the text first, and select Sign. The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing. Select the user certificate you want to use. Enter the signing PIN. The digital signature icon disappears, and the service may display a confirmation of your purchase. DRAFT Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM actions > Yes. Accessing these services may involve sending messages or making a phone call for which you may be charged. 16. SIM services 78 RM-209_en_1_FCC.fm Page 79 Thursday, September 7, 2006 12:18 PM 17. PC connectivity P C c o n n e c t i v i t y You can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through a Bluetooth or a data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. Nokia PC Suite With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service). You may find more information and PC Suite on the Nokia Web site at www.nokia.com/support or your local Nokia Web site. DRAFT Packet data, HSCSD, and CSD With your phone you can use the packet data, high-speed circuit switched data (HSCSD), and circuit switched data (CSD, GSM data) data services. For availability and subscription to data services, contact your network operator or service provider. See Modem settings, p. 50. The use of HSCSD services consumes the phone battery faster than normal voice or data calls. Bluetooth Use the Bluetooth technology to connect your compatible Laptop to the Internet. Your phone must have activated a service provider that supports Internet access and your PC has to support Bluetooth PAN
(Personal Area Network). After connecting to the network access point
(NAP) service of the phone and pairing with your PC your phone automatically opens a packet data connection to the Internet. PC Suite software installation is not necessary when using the NAP service of the phone. See Bluetooth wireless technology, p. 49. 79 RM-209_en_1_FCC.fm Page 80 Thursday, September 7, 2006 12:18 PM B a t t e r y i n f o r m a t i o n 18. Battery information Data communication applications For information on using a data communication application, refer to the documentation provided with it. Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation. For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call. DRAFT Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger and then disconnect and reconnect it to start the charging. Unplug the charger from the electrical plug and the device when not in use. Do not leave fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery 80 RM-209_en_1_FCC.fm Page 81 Thursday, September 7, 2006 12:18 PM B a t t e r y i n f o r m a t i o n in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15C and 25C (59F and 77F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Nokia battery authentication Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase. DRAFT should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. Authenticate hologram 1. When looking at the hologram on the label, you 2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively. 81 RM-209_en_1_FCC.fm Page 82 Thursday, September 7, 2006 12:18 PM B a t t e r y i n f o r m a t i o n 3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. 4. example, 12345678919876543210, and send to +61 427151515.
For India only: Enter Battery followed by the 20-digit battery code, for Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276. To create a text message,
For countries in Asia Pacific, excluding India: Enter the 20-digit code, for DRAFT National and international operator charges will apply. You should receive a message indicating whether the code can be authenticated. What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery. example, Battery 12345678919876543210, and send to 5555. 82 RM-209_en_1_FCC.fm Page 83 Thursday, September 7, 2006 12:18 PM T e c h n i c a l I n f o r m a t i o n 19. Technical Information Size Frequency range (Tx) Frequency range (Rx) Weight Battery Networks DRAFT 104 grams (3.7 ounces) incl. BL-4B battery 820 mAh Li-Ion Battery Wireless networks GSM 900, 1800 and 1900 4.6 cubic inches (75 ccm) Volume:
3.5 in (88 mm) Length:
Width:
1.7 in (43 mm) Thickness: 0.9 in (23 mm) GSM 900: 925 - 960 MHz GSM1800: 1805 - 1880 MHz GSM1900: 1930 - 1990 MHz GSM 900: 880 - 915 MHz GSM 1800: 1710 - 1785 MHz GSM1900: 1850 - 1910 MHz 2 W (max) 3.7 V DC GSM 900: 174 GSM 1800: 374 GSM 1900: 299 32 MB flash memory 16 MB RAM 59 F to 77 F
(15 C to 25 C) Tx output power Battery voltage Number of channels Operating temperature Memory size 83 RM-209_en_1_FCC.fm Page 84 Thursday, September 7, 2006 12:18 PM C a r e a n d m a i n t e n a n c e Care and maintenance
Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.
Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. DRAFT earrings or jewellery may scratch the display. the device. operation. circuit boards and fine mechanics. sensor, and light sensor lenses).
Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
Do not paint the device. Paint can clog the moving parts and prevent proper
Do not touch the main display with hard or angular materials. Objects like
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.
Use chargers indoors.
Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. 84 RM-209_en_1_FCC.fm Page 85 Thursday, September 7, 2006 12:18 PM A d d i t i o n a l s a f e t y i n f o r m a t i o n Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure that the above separation distance instructions are followed until the transmission is completed. Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. DRAFT Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following:
85 RM-209_en_1_FCC.fm Page 86 Thursday, September 7, 2006 12:18 PM A d d i t i o n a l s a f e t y i n f o r m a t i o n
Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker
Not carry the device in a breast pocket
Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. DRAFT Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel 86 RM-209_en_1_FCC.fm Page 87 Thursday, September 7, 2006 12:18 PM A d d i t i o n a l s a f e t y i n f o r m a t i o n depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Emergency calls To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device. Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. DRAFT 4. Press the call key. If certain features are in use, you may first need to turn those features off before you can make an emergency call. If the device is in the offline or flight mode, you must change the profile to activate the phone function before you can make an emergency call. Consult this guide or your service provider for more information. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. 2. Press the end key as many times as needed to clear the display and ready the 3. Enter the official emergency number for your present location. Emergency numbers vary by location. device for calls. Certification information (SAR) THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. 87 RM-209_en_1_FCC.fm Page 88 Thursday, September 7, 2006 12:18 PM A d d i t i o n a l s a f e t y i n f o r m a t i o n The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.73 W/kg. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com. Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over 1 gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 0.56 W/kg and when properly worn on the body is 0.47 W/kg. Information about this device model can be found at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: PPIRM-209. DRAFT 88 RM-209_en_1_FCC.fm Page 89 Thursday, September 7, 2006 12:18 PM A P P E N D I X APPENDIX DRAFT A message from the CTIA 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing. But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle--whether on the phone or not. The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same. But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need. When it comes to the use of wireless phones, safety is your most important call. Wireless phone "Safety Tips"
1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. 89 RM-209_en_1_FCC.fm Page 90 Thursday, September 7, 2006 12:18 PM A P P E N D I X Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. 2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you. 4. 3. Position your wireless phone within easy reach. Make sure you place your 5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a to do list while driving a car, you are not watching where you are going. Its common sense. Dont get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles. wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road. DRAFT 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue. distracting. Stressful or emotional conversations and driving do not mix--
they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road. 7. Do not engage in stressful or emotional conversations that may be 8. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a Good Samaritan in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. 90 RM-209_en_1_FCC.fm Page 91 Thursday, September 7, 2006 12:18 PM A P P E N D I X 9. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!
11. Call roadside assistance or a special wireless non-emergency assistance 10. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a Good Samaritan in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. DRAFT Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely. The wireless industry reminds you to use your phone safely when driving. For more information, please call 1-888-901-SAFE. For updates: http://www.wow-com.com/consumer/issues/driving/
articles.cfm?ID=85 Message from the FDA The U.S. Food and Drug Administration (FDA) provides the following consumer information about wireless phones. See http://www.fda.gov/cellphones/ for updated information. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless 91 RM-209_en_1_FCC.fm Page 92 Thursday, September 7, 2006 12:18 PM A P P E N D I X phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:
Support needed research into possible biological effects of RF of the type DRAFT FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration The National Institutes of Health participates in some interagency working group activities, as well.
Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.
Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and emitted by wireless phones;
92 RM-209_en_1_FCC.fm Page 93 Thursday, September 7, 2006 12:18 PM A P P E N D I X DRAFT FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document. What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the 93 RM-209_en_1_FCC.fm Page 94 Thursday, September 7, 2006 12:18 PM A P P E N D I X DRAFT exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure. Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit. Do wireless phone accessories that claim to shield the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing 94 RM-209_en_1_FCC.fm Page 95 Thursday, September 7, 2006 12:18 PM A P P E N D I X DRAFT more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim. How does FCC Audit Cell Phone RF?
After FCC grants permission for a particular cellular telephone to be marketed, FCC will occasionally conduct post-grant testing to determine whether production versions of the phone are being produced to conform with FCC regulatory requirements. The manufacturer of a cell phone that does not meet FCCs regulatory requirements may be required to remove the cell phone from use and to refund the purchase price or provide a replacement phone, and may be subject to civil or criminal penalties. In addition, if the cell phone presents a risk of injury to the user, FDA may also take regulatory action. The most important post-grant test, from a consumers perspective, is testing of the RF emissions of the phone. FCC measures the Specific Absorption Rate (SAR) of the phone, following a very rigorous testing protocol. As is true for nearly any scientific measurement, there is a possibility that the test measurement may be less than or greater than the actual RF emitted by the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as measurement uncertainty. When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate. This approach ensures that when FCC takes regulatory action, it will have a sound, defensible scientific basis. FDA scientific staff reviewed the methodology used by FCC to measure cell phone RF, and agreed it is an acceptable approach, given our current understanding of the risks presented by cellular phone RF emissions. RF emissions from cellular phones have not been shown to present a risk of injury to the user when the measured SAR is less than the safety limits set by FCC (an SAR of 1.6 w/kg). Even in a case where the maximum measurement uncertainty permitted by current measurement standards was added to the maximum permissible SAR, the resulting SAR value would be well below any level known to produce an acute effect. Consequently, FCCs approach with measurement uncertainty will not 95 RM-209_en_1_FCC.fm Page 96 Thursday, September 7, 2006 12:18 PM A P P E N D I X result in consumers being exposed to any known risk from the RF emitted by cellular telephones. FDA will continue to monitor studies and literature reports concerning acute effects of cell phone RF, and concerning chronic effects of long-term exposure to cellular telephone RF (that is, the risks from using a cell phone for many years). If new information leads FDA to believe that a change to FCCs measurement policy may be appropriate, FDA will contact FCC and both agencies will work together to develop a mutually-acceptable approach. Updated July 29, 2003 DRAFT 96
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2006-09-27 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2006-09-27
|
||||
1 2 3 | Applicant's complete, legal business name |
Microsoft Corporation
|
||||
1 2 3 | FCC Registration Number (FRN) |
0007807100
|
||||
1 2 3 | Physical Address |
1 Microsoft Way
|
||||
1 2 3 |
Redmond, Washington 98052
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
h******@AmericanTCB.com
|
||||
1 2 3 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 3 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
1 2 3 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
PPI
|
||||
1 2 3 | Equipment Product Code |
RM-209
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
H**** S******
|
||||
1 2 3 | Title |
Director, EMC, SI, and RF Compliance
|
||||
1 2 3 | Telephone Number |
425-7********
|
||||
1 2 3 | Fax Number |
425-7********
|
||||
1 2 3 |
h******@microsoft.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/11/2006 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | PCE - PCS Licensed Transmitter held to ear | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | GSM 900/1800/1900 Cellular Telephone W/BT | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power Output listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains a GSM PCS phone. | ||||
1 2 3 | Power Output is EIRP. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 2.2 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Head: 0.56 W/kg; Body-worn 0.47 W/kg. This device contains GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations. This device contains a Bluetooth transmitter. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
TCC Microsoft
|
||||
1 2 3 |
TCC Tampere
|
|||||
1 2 3 | Name |
J****** J******
|
||||
1 2 3 | Telephone Number |
358-7********
|
||||
1 2 3 |
35871********
|
|||||
1 2 3 | Fax Number |
358-7********
|
||||
1 2 3 |
358-7********
|
|||||
1 2 3 |
f******@microsoft.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402 | 2480 | 0.001175 | 1M00FXD | ||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2402 | 2480 | 0.001259 | 1M00GXD | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 24E | BC | 1850.2 | 1909.8 | 1.318 | 0.04 ppm | 300KGXW | |||||||||||||||||||||||||||||||||
3 | 2 | 24E | BC | 1850.2 | 1909.8 | 0.55 | 0.04 ppm | 300KG7W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC