all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Manual | Users Manual | 511.69 KiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Internal Photos | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Setup Photos |
1 2 | Manual | Users Manual | 511.69 KiB |
Nokia 2118 User Guide FCC DRAFT 3 Part No. 9237873, Issue No. 1 Copyright 2005 Nokia. All rights reserved. Nokia, Nokia 2118, Xpress-on, Pop-Port, Nokia Connecting People, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners. US Patent No 5818437 and other pending patents. T9 text input software Copyright 1999-2005. Tegic Communications, Inc. All rights reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. The information contained in this user guide was written for the Nokia 2118 product. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice. UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. EXPORT CONTROLS This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited. FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference. 4 FCC DRAFT C o n t e n t s Contents Contents.......................................................................................................... 5 For your safety............................................................................................... 6 Welcome.......................................................................................................... 9 1. Nokia 2118 phone at a glance........................................................... 11 2. Set up your phone.................................................................................. 15 3. Text entry ................................................................................................. 22 4. Contacts list ........................................................................................... 25 5. Messages .................................................................................................. 34 6. Call log ...................................................................................................... 44 7. Profiles ...................................................................................................... 48 8. Settings..................................................................................................... 49 9. Voice .......................................................................................................... 62 10.Organizer................................................................................................. 66 11.Games....................................................................................................... 74 12.Minibrowser ........................................................................................... 75 13.PC connectivity...................................................................................... 77 14.Enhancements ....................................................................................... 78 15.Reference information ........................................................................ 80 Care and maintenance .............................................................................. 81 Additional safety information................................................................. 83 Nokia One-Year Limited Warranty ..................................................... 102 Index............................................................................................................ 107 FCC DRAFT 5 F o r y o u r s a f e t y For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. Switch on safely Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Road safety comes first Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. Interference Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. Switch off in hospitals Follow any restrictions. Switch the phone off near medical equipment. Switch off in aircraft Follow any restrictions. Wireless devices can cause interference in aircraft. Switch off when refueling Don't use the phone at a refueling point. Don't use near fuel or chemicals. Switch off near blasting Follow any restrictions. Do not use the phone where blasting is in progress. Use sensibly Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. Qualified service Only qualified personnel may install or repair this product. 6 FCC DRAFT F o r y o u r s a f e t y Enhancements and batteries Use only approved enhancements and batteries. Do not connect incompatible products. Water-resistance Your phone is not water-resistant. Keep it dry. Backup copies Remember to make backup copies or keep a written record of all important information stored in your phone. Connecting to other devices When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. Emergency calls Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the main screen. Key in the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so. About your phone The wireless phone described in this guide is approved for use on the CDMA 800 network. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect privacy and legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger. Network Services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These Network Services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize Network Services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use Network Services. For instance, some networks may not support all language-dependent characters and services. FCC DRAFT 7 F o r y o u r s a f e t y Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information. Shared memory The following features in this device may share memory: contacts, text messages, ring tones, calendar, and games. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. Your phone may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as messages and ring tones may have a certain amount of memory specially allotted to them in addition to the memory shared with other features. 8 FCC DRAFT Welcome W e l c o m e Congratulations on your purchase of the Nokia 2118 mobile phone. Your phone provides many functions which are practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar, and more. To personalize your phone, you can set your favorite ring tones and select an Xpress-onTM color cover. Register your phone Make sure to register your phone at www.warranty.nokiausa.com or call 1-888-
NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should call a customer center or to have your phone repaired. Get help Find your phone label If you need help, Nokia Customer Care is available for assistance. Before calling, we recommend that you write down the electronic serial number (ESN) and have it available. The ESN is found on the type label, which is located beneath the battery on the back of the phone. Contact Nokia Please have your product with you when contacting either of the following numbers:
Nokia Customer Care Center, USA Nokia Inc. 7725 Woodland Center Boulevard, Suite #150 Tampa, Florida 33614 Tel: 1-888-NOKIA-2U (1-888-665-4228) Fax: 1-813-249-9619 TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542) Customer Care Center, Mexico Nokia Mexico, S.A. de C.V. Paseo de los Tamarindos 400-A Piso 16 Col. Bosques de las Lomas FCC DRAFT 9 W e l c o m e C.P. 05120 Mexico D.F., Mexico Tel: (55) 261-7200 Fax: (55)261-7299 Customer Care Center, Argentina Azopardo 1071 C1107ADQ Buenos Aires Argentina Tel: (11) 4307-1427 Fax: (11) 4362-8795 Customer Care Center, Canada Nokia Products Ltd. 601 Westney Road South Ajax, Ontario L1S 4N7 Tel: 1-888-22-NOKIA (1-888-226-6542) Fax: 1-905-619-4360 Updates From time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com. An interactive tutorial for this product may be available at the web site www.nokiahowto.com. Accessibility solutions Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the web site at www.nokiaaccessibility.com. 10 FCC DRAFT N o k i a 2 1 1 8 p h o n e a t a g l a n c e 1. Nokia 2118 phone at a glance Power key (1) Earpiece (2) Right selection key (3) End key (4) Keypad (5) Connection port (6) Microphone (7) Charger port (8) Scroll up and down key (9) Call key (10) Left selection key (11) Screen (12) FCC DRAFT 11 N o k i a 2 1 1 8 p h o n e a t a g l a n c e Start screen The start screen is home base and indicates your phone is in standby mode. Signal strength (1)A higher bar indicates more power in the signal. Battery level (2)A higher bar indicates more power in the battery. Menu (3)Press the left selection key to select this option. Contacts (4)Press the right selection key to select this option. Quick keys In the standby mode, the scroll key functions as follows:
Scroll up keyActivate the flashlight. Scroll down keyGo to the contacts list. Indicators and icons Icon Indicates... You have one or more text or picture messages. See "Read and reply," page 36. You are making a call with the device. See "Make a call,"
page 19. You have one or more voice messages. See "Voice messages," page 38. Your phone keypad is locked. See "Keyguard," page 21. Your phone is set to the silent profile. See "Profiles,"
page 48. The alarm clock is on. See "Alarm clock," page 66. 12 FCC DRAFT Icon or or N o k i a 2 1 1 8 p h o n e a t a g l a n c e Indicates... The countdown timer is running. See "Countdown timer,"
page 71. The stopwatch timing is running in the background. See
"Stopwatch," page 71. Integrated handsfree is active. The timed profile is selected. See "Profiles," page 48. An enhancement is connected to the phone. Voice privacy encryption is active (or is not active) in the network. Phone is roaming outside of your home network. Phone is in a 1XRTT network. See "Network Services,"
page 7. Get the most out of this guide The following sections illustrate the various components of your phone. Familiarize yourself with these sections to help you understand the instructions that follow. This guide uses certain terms for the steps that you are asked to perform:
Press means to press and release a key quickly. For example, press 7 means press the key on the keypad that is labeled with the number 7 and the letters pqrs.
Press and hold means to press and hold a key for 23 seconds, then release the key.
Selection keys are used to select a menu option. To select an option, press the selection key below the menu item on the phone screen.
Scroll keys are used to move up and down in the menus.
Call and end keys: Press the call key to place a call or to answer an incoming call. Press the end key to end a call or press and hold to return to standby mode. FCC DRAFT 13 N o k i a 2 1 1 8 p h o n e a t a g l a n c e Phone menus Phone features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customize your phone features. You can access these menus and submenus by using the scroll method. Scroll method 1. In the standby mode, select Menu, and scroll through the main menu with the scroll up and down key. 2. When you arrive at a menu, use Select (the left selection key) to enter submenus. Select Exit from the main menu level or press the end key to return to standby mode from any menu or submenu. Select Back from the submenu level to return to the previous menu. Shortcuts You can go directly to almost any menu or submenu, as well as activate most features by using a shortcut. In the standby mode, select Menu; then within 3 seconds press the key or keys associated with the menu function you would like to view or activate. For example, to select the Meeting profile, select Menu 3-3-1 in standby mode
(Menu > 3 Profiles > 3 Meeting > 1 Activate). After a brief pause, the Meeting profile is activated. In-phone help Many features have brief descriptions (help text) that can be viewed on the display. To view these descriptions, scroll to a feature, and wait for about 15 seconds. If needed, select More to view all of the description, or Back to exit. In order to view the descriptions, you must activate help text. 1. In the standby mode, select Menu > Settings > Phone settings > Help text activation. 2. Highlight and select On to display help text or Off to turn this feature off. 14 FCC DRAFT 2. Set up your phone S e t u p y o u r p h o n e Antenna Your device has an internal antenna located towards the top of the phone. Hold the phone as you would any other telephone with the antenna area pointed up and over your shoulder. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Avoid contact with the antenna area when operating the phone to optimize antenna performance and battery life. Battery Always switch the device off and disconnect the charger before removing the battery. Remove the back cover 1. With the back of the phone facing you, push down on the button on the back of the phone. 2. Slide the back cover toward the bottom of the phone and remove. Remove the battery After you have removed the back cover, insert your finger into the finger grip and lift the battery from its compartment. FCC DRAFT 15 S e t u p y o u r p h o n e Replace the battery 1. Position the battery so the gold-colored contacts match up with those on the phone. The battery label should face away from the phone. 2. Insert the battery, gold-colored contact end first, into the battery slot. 3. Push down on the other end of the battery to snap the battery into place. Replace the back cover Slide the back cover toward the top of the phone until you hear a click and see the back cover release button. Charge the battery 1. Plug the charger transformer into a standard ac outlet. 2. Insert the charger output plug into the round jack at the bottom end of the phone. After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or any calls can be made. 16 FCC DRAFT S e t u p y o u r p h o n e Turn your phone on or off To turn your phone on or off, press and hold the power key on top of the phone for at least 3 seconds. Connect the headset A compatible headset may be purchased with your phone or separately as an enhancement. (See
"Enhancements," page 78.) 1. Plug the headset connector into the Pop-Port connector at the bottom end of your phone. 2. Position the headset on your ear. With the headset connected, you can make, answer, and end calls as usual.
Use the keypad to enter numbers.
Press the call key to place a call.
Press the end key to end a call. Change the Xpress-on covers Note: Before removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached. Remove the back cover See "Remove the back cover," page 15 for instructions on removing the back cover. FCC DRAFT 17 S e t u p y o u r p h o n e Remove the front cover Gently pull the bottom of the front cover away from the rest of the phone and remove. Install the key mat and front cover 1. Remove the key mat from the old front cover and place it into the new front cover as shown. 2. Press the front cover and key mat against the phone, and snap the front cover into place. Replace back cover See "Replace the back cover," page 16. 18 FCC DRAFT S e t u p y o u r p h o n e Insert a photo in the back cover You can insert one of your favourite photos in the back cover to personalise your phone. The size of the photo should not be larger than 45 mm x 25 mm. Trim the sides and corners at the bottom of the photo. Please note, if the photo is smaller than the window size, it may not stay in its position. The photo should be inserted with its image side facing the transparent window of the cover. Make a call Use the keypad 1. Enter the phone number (including the area code), and press the call key.
(To delete a character to the left of the cursor, select Clear.) 2. Press the end key to end the call or to cancel the call attempt. Use the save contact option 1. In the standby mode, enter the phone number (including the area code) and select Options > Save, enter a name for the the contact, and select OK. 2. Press the call key to make the call, or select Done to return to standby mode. Use the contacts list 1. 2. Press the call key to make the call, or select Details to view details of the In the standby mode, scroll down to display the contents of your contacts list. entry. Use the last dialed number 1. In the standby mode, press the call key to display the last 20 numbers dialed. 2. Scroll to the number (or name) you wish to redial, and press the call key. FCC DRAFT 19 S e t u p y o u r p h o n e A conference call Conference calling is a network service that allows you to take part in a conference call with two other participants. 1. Make a call to the first participant. 2. With the first participant on the line, select Options > New call. 3. Enter the phone number of the second participant, or select Search to retrieve a number from the contacts list. 4. Select Flash. The first participant is put on hold. 5. When the second participant picks up, press the call key to connect the calls. 6. To end the conference call, select Options > End all calls, or press the end key. Answer calls Answer a call with the keypad locked To answer a call with the keypad locked, press the call key. During the call, all features function as normal. When you end or reject the call, the keypad automatically relocks. See "Keyguard," page 21. When the phone is locked, calls still may be possible to the official emergency number programmed into your phone. Adjust the volume during a call To increase or decrease the volume during a call, scroll up or down during the call. When adjusting the volume, a bar chart appears in the display indicating the volume level. Loudspeaker You can use your phone as a loudspeaker during a call. Do not hold the phone to your ear during the loudspeaker operation. Warning: Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud.
To activate the loudspeaker while in a call, select Loudsp.
To deactivate the loudspeaker during a call, select Handset. 20 FCC DRAFT S e t u p y o u r p h o n e The loudspeaker is deactivated automatically when a call (or a call attempt) ends or when certain enhancements are connected. Options during a call Many of the options that you can use during a call are network services. Check with your wireless service provider for more information. 1. Select Options during a call to display a list of options available during a call. 2. Select an option. Keyguard With keyguard, you can lock the keypad to prevent keys from being pressed accidentally. Remember to lock your phone keypad to prevent accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates. When the keyguard is on, calls still may be possible to the official emergency number programmed into your phone. To unlock the keypad, select Unlock and press * within 2 seconds. To lock the keypad, select Menu and press * within 2 seconds. Use the flashlight Your phone has a built-in flashlight that you can activate when the phone is in the standby mode or when there is a call in progress. To activate the flashlight, press and hold the scroll up key. The light stays on until you release the scroll up key. You can also use the flashlight to alert you to an incoming call. For more information, see "Customize a profile," page 48. FCC DRAFT 21 T e x t e n t r y 3. Text entry You can use two methods for entering text and numbers:
Standard mode is the only way to enter text into the contacts list, and to rename caller groups.
Predictive input is a quick and easy method for writing messages and creating a calendar note. Standard mode Text (Abc)
Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry.
Press 0 to enter a space thereby accepting a completed word.
Press 1 to enter a period (.).
Press * to display special characters. See more about special characters on the following pages. Numbers (123) To switch to 123 mode from Abc mode, press and hold # at any message entry screen until the icon in the upper left corner of the display switches from Abc to 123 (or vice versa). To enter a single number in Abc mode, press and hold the specific number key until the number appears. Punctuation and special characters While at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Scroll to navigate through the list of special characters. Once a character is highlighted, select Insert to insert the character into your message. 22 FCC DRAFT T e x t e n t r y Delete text To delete text, you can use either option.
Select Clear to backspace the cursor and delete a character.
Select and hold Clear to backspace continuously and delete characters. Predictive text input Predictive text input allows you to write messages quickly using your keypad and the built-in dictionary. It is much faster than the standard mode method, because for each letter, you only press the corresponding key on your keypad once. Activate and deactivate 1. At any text entry screen, select Options > Predictive text. 2. Select the language of your choice. The language setting affects the time and date formats of the clock, alarm clock, and calendar. Enter text The illustration below simulates your display each time a key is pressed. For example, to write Nokia with predictive text on and with the English dictionary selected, press each of the following keys once:
6 6 5 4 2
Press 0 to enter a space and begin writing the next word.
If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, select Previous.
If ? appears after a word, select Spell to add the word to the dictionary.
Press 1 to insert a period into your message.
Press and hold * to display special characters. Press * again to cycle through all available characters.
Press and hold the specific number key to enter a number. FCC DRAFT 23 T e x t e n t r y
Press # to switch predictive text on or off and to use predictive text in various modes. As you press #, the following icons (not the descriptions) appear in the upper left of the display screen:
Uppercase text: standard mode is on. Lowercase text: standard mode is on Sentence case text: standard mode is on. Sentence case text: predictive text is on. Lowercase text: predictive text is on. Delete text To delete text, you can use either option.
Select Clear to backspace the cursor and delete a character.
Select and hold Clear to backspace continuously and delete characters. 24 FCC DRAFT 4. Contacts list C o n t a c t s l i s t The contacts list can hold up to 250 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list. Search 1. In the standby mode, select Contacts > Search. 2. Enter the first character of the contact name and highlight the contact you wish to view. 3. Select Details > Options and the action you want to apply to the contact. Add new contacts In the standby mode, enter the phone number you wish to save. Save a name and number 1. 2. Select Options > Save. 3. Enter the name, and select OK > Done. Save a number (only) 1. 2. Select and hold Options. In the standby mode, enter the phone number you wish to save. In the standby mode, select Contacts > Add new. Save an entry 1. 2. Enter the name, and select OK. 3. Enter the phone number, and select OK > Done. FCC DRAFT 25 C o n t a c t s l i s t Save voice mail dialing code You can insert special characters called dialing codes into phone numbers such as voice mail, and save the number to a speed dial location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string. Voice mail services vary by service provider. The following instructions are examples of common operations. Please check with your service provider for specific instructions for using your voice mail service. Write down number and process 1. Write down your voice mailbox number. 2. Call and check your voice mail as you normally would. 3. Write down your interaction with the recorded prompts step-by-step. Note that each voice mail service may vary. Your steps may resemble the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press *. Be precise; you will need this information in "Set up voice mail with dialing codes," page 26. Insert dialing codes Press * repeatedly to cycle through dialing codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialing string. The following dialing codes are available:
Dialing code
Indicates... Bypasses a set of instructions.
p w Causes the international access code to be replaced by +. Pauses for 2.5 seconds before sending any numbers that follow. Waits for you to press the call key before sending the numbers or codes that follow. Set up voice mail with dialing codes 1. 2. Scroll to an empty 1-touch dialing slot, and select Assign. In the standby mode, select Contacts > 1-touch dialing. 26 FCC DRAFT C o n t a c t s l i s t 3. Enter your voice mailbox number, including the area code. 4. Refer to dialing codes, and enter any codes as necessary using the information that you saved from "Write down number and process," page 26. For example, if you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number, for example, 2145551212pp. 5. Enter any remaining pauses or other information that allows you to listen to your messages, and select OK. 6. Enter a name (such as voice mail), and select OK. To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key in the standby mode. Save addresses and notes To save an address or note, add it to an existing entry (contact). 1. In the standby mode, scroll down to display a list of entries in your contacts list. 2. Scroll to a name to which you want to add information. 3. Select Details > Options > Add detail > E-mail, Web address, Street addr., or Note. 4. Enter the text for the note or address, and select OK. Save multiple numbers You can save different types of phone numbers and short text items per name to the contacts list. The first number you save for any entry is automatically set as the default, but the default number can always be changed. 1. In the standby mode, scroll down to display a list of entries. Highlight the entry you wish to add a phone number or text item. 2. Select Details > Options > Add number or Add detail. 3. Select General, Mobile, Home, Work, Fax, or E-mail, Web address, Street addr., or Note. 4. Enter the number or text for the type you have selected, and select OK. 5. To change the type, select Change type in the options list. To change the default number for the contact entry. FCC DRAFT 27 C o n t a c t s l i s t 1. In the standby mode, scroll down to the entry you wish to change, and select Details. 2. Scroll to the number you wish to set as default, select Options > As primary no. Set up voice tags For more information on setting up voice tags and other voice features, see
"Voice tags," page 63. Set up caller groups You can add contacts list entries to any of five caller groups, and assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic. Set up a group 1. In the standby mode, scroll down to display a list of entries in your contacts list. 2. Scroll to a name you want to add to a caller group. 3. Select Details > Options > Caller groups. 4. Select the caller group to which you would like to add the name. Choose an option 1. In the standby mode, select Contacts > Caller groups > Family, VIP, Friends, Business, or Other. 2. Scroll to highlight a group, and select one of the following caller group options:
Rename groupRename the group to your preference. Group ringing toneSet the ringing tone for the group. Group logoTurn the graphic for the caller group on or off. Group membersAdd or remove members from the caller group. Set up 1-touch dialing You can associate any entry in the contacts list with a key from 29; to dial those entries, press and hold the assigned key. 28 FCC DRAFT C o n t a c t s l i s t In the standby mode, select Contacts > 1-touch dialing. Assign a key to 1-touch dialing 1. 2. Scroll to any empty slot, and select Assign. 3. Enter the number (including the area code), and select OK; or select Search to retrieve a number from the contacts list. 4. Enter the contact name for the number, and select OK. If 1-touch dialing is off, the phone displays a prompt asking if you want to turn 1-touch dialing on. 5. Select Yes to activate 1-touch dialing. Change 1-touch dialing numbers 1. 2. Scroll to the 1-touch dialing entry you wish to change and select Options >
In the standby mode, select Contacts > 1-touch dialing. Change. 3. Enter the new number; or select Search to retrieve a number from the contacts list, and select OK. 4. Enter a name for the entry, and select OK. Delete 1-touch dialing numbers In the standby mode, select Contacts > 1-touch dialing. 1. 2. Scroll to the 1-touch dialing location you wish to delete. 3. Select Options > Delete > OK to delete the key assignment. Edit contacts list entries 1. 2. Scroll to the entry you would like to edit, and select Details. In the standby mode, scroll down to display the contents of your contacts list. Edit phone number 1. Highlight the phone number you would like to edit and select Options. 2. Select one of the following options, then OK. Add voice tagAdd a voice tag to the contact. Edit numberEdit an existing phone number of the contact. FCC DRAFT 29 C o n t a c t s l i s t Delete numberDelete a phone number from the contact. Use numberDisplay the phone number on the start screen, ready to be called. ViewView the details of the contact. Change type >General, Mobile, Home, Work, or FaxChange the number type. As primary no.Change the default number of the contact. Add numberAdd a number to the contact. Add detail >E-mail, Web address, Street addr., or NoteAdd to the contact. Caller groupsAdd the contact to an existing caller group. Custom toneAdd a custom ring tone to the contact. Send bus. cardSend the contact as a business card to another phone. Send messageCreate and send a message to the contact. 1-touch dialingAdd the contact to your speed dial list. Edit nameEdit the name of the contact. View nameView the name of the contact. DeleteDelete the entire contact entry from your contacts list. E-mail address entry 1. Highlight the e-mail address entry you want to update and select Options. 2. Select one of the following options, then OK. Send e-mailSend an e-mail. Edit detailEdit existing details of e-mail. Delete detailDelete existing e-mail. ViewView the details of the e-mail contact. Change type >General, Mobile, Home, Work, or FaxChange the number type. Add detail >E-mail, Web address, Street addr., or NoteAdd to the contact. Add numberAdd a number to the entry. Caller groupsAdd the e-mail to an existing caller group. 30 FCC DRAFT C o n t a c t s l i s t Custom toneAdd a custom ring tone to the contact. Send bus. cardSend the contact a business card. Edit nameEdit the name of the contact. View nameView the name of the contact. DeleteDelete the entire e-mail entry from your contacts list. Edit web address 1. Highlight the web address entry you want to edit and select Options. 2. Select the option you wish to perform, then OK. In the standby mode, select Contacts > Delete. Delete contacts list entries 1. 2. To delete individual entries, scroll to One by one. 3. Scroll to the entry you wish to delete, and select Delete > OK to confirm. 4. To delete the entire contents of your contacts list, select Delete all > OK. 5. Enter the security code, and select OK. See "Security settings," page 56 for more information. Add number list entries Add number allows you to tag each phone number entry with a phone type. 1. 2. Highlight a contact from the list, and select Add. 3. Select the tag as General, Mobile, Home, Work, or Fax, and enter the number. In the standby mode, select Contacts > Add number. Settings Settings allows you to determine how your phone numbers are viewed and how much memory remains in the contacts list. 1. 2. Select Scrolling view to select how names and numbers are viewed in In the standby mode, select Contacts > Settings. Contacts list. FCC DRAFT 31 C o n t a c t s l i s t 3. Select Memory status to determine the amount of space available in Contacts list. Voice tags Voice tags allows you to playback, change or delete voice tags. In the standby mode, select Contacts > Voice tags, scroll to a voice tag, and select Options > Playback, Change, or Delete. My number In the standby mode, select Contacts > My number to display your phones number. Caller groups Caller groups allows you to organize your contact information into groups. 1. In the standby mode, select Contacts > Caller groups > Family, VIP, Friends, Business, or Other. 2. Select Rename group, Group ringing tone, Group logo, or Group members, and follow the directions. Send and receive contacts (business cards) You can send and receive an entry in your contacts list with a text message if supported by your wireless provider. Send a business card You can send a business card as a text message to a compatible phone or other handheld device. 1. In the standby mode, scroll down to display the contents of your contacts list. Highlight an entry from the contacts list that you wish to send, select Details > Options > Send bus. card. To send the business card as a message, select Via text msg. 2. Select Primary no. or All details (only if contact has more than one phone number). 32 FCC DRAFT C o n t a c t s l i s t 3. Enter the number for your recipient or select Search to retrieve a number from your contacts list. 4. Select OK. The business card is sent. FCC DRAFT 33 M e s s a g e s 5. Messages If you have subscribed to a messaging service through your wireless provider, you can send and receive messages to compatible phones that also subscribe to a compatible message service. You may also be able to send and receive picture messages, and e-mail messages. Note: When sending messages, your device may display Message sent. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details, about messaging services, check with your service provider. Text messages In the standby mode, select Menu > Messages > Text messages and fromthe following:
Create messageAllows you to create and send messages. Edit message allows you to create or edit your message. Add number, Add e-mail, and Add list allows you to select the message recipients. Select List recipients to see current list of recipients. Select Send to send the message. InboxAllows you to check for received messages. Sent itemsAllows you to check for sent messages. ArchiveAllows you to save messages in an archive. TemplatesInlcudes a selection of templates for creating messages. My foldersAllows you to create and name your personal folders. Distribution listsAllows you to create and edit your personal mailing list for contacts. Delete messagesAllows you to delete messages from a selected folder or all folders. Message settingsIncludes options for changing settings for reading, writing and sending messages. 34 FCC DRAFT M e s s a g e s Write and send 1. In the standby mode, select Menu > Messages > Text messages > Create message > Add number or Add e-mail. 2. Enter the recipients phone number; or e-mail address, or select Search to retrieve a number from your contacts list, and select OK. 3. Repeat steps 1 and 2 to add more recipients, and select OK. 4. Select Options > Edit message. 5. Compose a message using the keypad, and select Options > Send. Templates Templates are short, prewritten messages which can be recalled and inserted into new text messages when you are short on time. 1. In the standby mode, select Menu > Messages > Text messages > Create message > Edit message >Options > Use template. 2. Highlight and select one of the available templates. 3. Enter the template into your new message. 4. Complete the message using the keypad. 5. Select Options > Send. 6. If you do not have any recipients you must add them with the Add number option. Create a distribution list 1. In the standby mode, select Menu > Messages > Text messages >
Distribution lists > Options > Add list. 2. Enter a name for the list, and select OK. 3. To add a contact to this list, select Options > Add contact, and add the contacts one by one. Send a message to a distribution list 1. In the standby mode, select Menu > Messages > Text messages > Create message > Add list. FCC DRAFT 35 M e s s a g e s 2. Scroll to a distribution list and select OK Options > Send. Your message is then sent to each of the recipients in the list. Read and reply When you receive a message, a notification message displays and the unopened letter icon (
1. Select Show to read the message or Exit to dismiss the notification message.
) appears in the display. When unopened messages are in your inbox, corner during standby mode as a reminder. is shown in the upper left Use the scroll keys to view the whole message, if necessary. 2. Select Options > Reply. 3. Compose your reply using the keypad, and select Options > Send. Choose a message option Create message options When you create or reply to a text message, depending on the mode of text input you are using and the features supported by your wireless service provider, some or all of the following options are available:
PreviewIf a message contains a picture, previews the inserted picture before sending. Select Back to return to the list of options. SendSend the message to one recipient. List recipientsSend the message to more than one recipient. SettingsSet the priority of the message. Save messageSelect Sent items to save the message in the sent items folder;
select Templates to save the message as one of your predefined templates; select Archive to save the message in your archive. Clear textErase the text clipboard. Exit editorSave the message to your sent items folder automatically, and leave the message editor. Insert contactInsert a name from your contacts list into your message. Insert numberInsert a phone number or find a phone number in the contacts list. Use templateInsert a predefined template into your message. 36 FCC DRAFT M e s s a g e s Insert pictureInsert a picture into your message. Change pictureTakes you back to the picture list. Scroll to highlight a new picture, select View > Insert to replace the previous picture in your message. Delete pictureSelect OK to delete the picture from your message, or select Back to return to the list of options. Insert smileyInsert the smiley face of your choice into your message. Insert word or Edit wordEnter or edit the text of a new word that might not appear in the predictive text dictionary. This displays only when the Predictive text option is on. Insert symbolInsert a special character into your message. This displays only when the Predictive text option is on. Predictive textSelect a predictive text language or select Prediction off to turn this option off. MatchesView matches found in the dictionary for the word you want to use. Read message options When you read a text message, the following options are available:
DeleteDiscard the message. ReplyReply to the message. Create the message and select Options > Send. The senders phone number or e-mail is used as the default Use numberSelect Save, Add to contact, Send message, or Call. SaveSave the message to a folder. ForwardForward the message to another phone number. RenameEdit the title of the message. Change sending options In the standby mode, select Menu > Messages > Text messages > Message settings > Sending options and the setting you wish to change:
PrioritySelect the priority of the note as Normal or Urgent. Delivery noteA note is sent to you confirming delivery of the message. Select On or Off. Send callback numberA callback number is sent to the recipient. Select Off or the default phone number for On. FCC DRAFT 37 M e s s a g e s Change other settings In the standby mode, select Menu > Messages > Text messages > Message settings > Other settings and the setting you wish to change:
Message font sizeSelect Small font or Large font. Message overwritingSelect Sent items only, Inbox only, S. items & inbox, or Off. When the message memory is full, your phone cannot send or receive any new messages. However, you can set your phone to automatically replace old messages in the Inbox and Sent items folders when new ones arrive. Save to Sent items as sendingSelect Always save, Always prompt, or Off. Voice messages If you subscribe to voice mail, your wireless provider will furnish you with a voice mailbox number. You need to save this number to your phone to use voice mail. When you receive a voice message, your phone lets you know by beeping, displaying a message, or both. If you receive more than one message, your phone shows the number of messages received. Save voice mailbox number Your wireless provider may have already saved your voice mailbox number to your phone. If so, the number will appear in the display in step 2. Select OK to leave the number unchanged. 1. In the standby mode, select Menu > Messages > Voice messages > Voice mailbox number. If the box is empty, enter the voice mailbox area code and number. 2. 3. Select OK. Call and set up your voice mail 1. When you save the voice mailbox number, press and hold 1. 2. When you connect to voice mail and the prerecorded greeting begins, follow the automated instructions to set up your voice mail. Listen to your voice messages Once you have set up voice mail, you can dial the number in one of four ways:
38 FCC DRAFT M e s s a g e s
Dial the number using the keypad.
Press and hold 1.
Select Listen if there is a notification message in the display.
In the standby mode, select Menu > Messages > Voice messages > Listen to voice messages. When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages. Automate voice mail You can can automate voice mail with dialing codes. For more information, see
"Save voice mail dialing code," page 26 Picture messages Picture messaging is a network service. If your wireless service provider supports this feature, your phone comes with five preloaded pictures. Pictures can be attached to a message and sent using text messaging to compatible phones or PCs. Picture messages behave the same as text messages, but pictures take up more space than text. Pictures are stored in the Templates folder at Menu >
Messages > Text messages > Templates. Note: Picture message function can be used only if it is supported by your network operator or service provider. Only compatible devices that offer picture message features can receive and display picture messages. Copyright protections may prevent some images, music (including ringing tones) and other content from being copied, modified, transferred, or forwarded. Write and send When a picture is added to a text message, the message converts to picture message. The message counter in the upper right of your display shows the characters available for you to type in. 1. In the standby mode, select Menu > Messages > Text messages > Create message > Edit message. 2. Write a message using the keypad (or enter nothing if you choose to just send a picture), and select Options. 3. Select Insert picture. FCC DRAFT 39 M e s s a g e s 4. Scroll down through the pictures, and select View. 5. Select Insert to insert the picture into your message; otherwise select Back, scroll to another picture, and select View again. 6. To send the picture message, select Options > Send. 7. Select Add number. 8. Enter the phone number for your recipient, or select Search to retrieve a number from the contacts list, and select OK. 9. Select Options > Send. Picture images are not saved in Sent items and can only be received Via text msg. View a picture message When you receive a picture message, the message icon (
display. 1. Select Show to view the picture message or select Exit to dismiss the
) appears in the notification message. 2. If you have more than one picture message, select the message of your choice. When you have unopened picture messages in your inbox, the upper left corner during standby mode as a reminder. is shown in 3. Scroll to view the whole picture if necessary. 4. Once you are finished, select Back to view the notification in the Inbox or Options for other choices such as Reply or Forward. If you would like to save the picture to your Templates folder for later use, select Options > Save picture. You can enter a title for the picture, and select OK. If your templates folder is full of pictures, select the picture you would like to replace. Minibrowser messages Minibrowser messaging is a network service. See "Network Services," page 7 for more information. If your wireless service provider supports this feature, you can check for e-mail messages using the minibrowser. In the standby mode, select Menu >
Messages > Minibrowser messages > Connect. 40 FCC DRAFT M e s s a g e s See "Minibrowser," page 75 for more information on using the Minibrowser in your phone to access web pages. Message folders Save messages to folders You can save drafts of messages or received messages to an existing folder or to a folder that you have created. 1. Open the received message or create a new message, and select Options. 2. Select Save message > Sent items, Templates, Archive, or a folder you have created on your own. Save the message to another folder While viewing a message, select Options > Save message and the destination folder. View saved messages 1. In the standby mode, select Menu > Messages > Text messages. 2. Select and open the folder containing the message you wish to view. 3. Select the message you wish to view. Inbox folder Messages are automatically stored in the inbox after they have been read or if you select Back when a notification appears in standby mode. Sent items folder Messages that you have sent and messages that you have created but have not sent are automatically stored in the sent items folder. When sending messages, set Save to Sent items as sending to Always save or Always prompt to ensure that your messages are saved. If Save to Sent items as sending is set to Off, sent messages are not stored in the sent items folder. To change the settings, select Menu > Messages > Text messages > Message settings > Other settings. FCC DRAFT 41 M e s s a g e s Archive folder Store messages that have been read in the Archive folder. Templates folder Pictures and prewritten templates are stored in the Templates folder. Preloaded templates can be edited and customized. My folders Keep your messages organized by creating custom folders and saving some of your messages there. Add a folder 1. In the standby mode, select Menu > Messages > Text messages > My folders > Options > Add folder. 2. Enter a name for the new folder, and select OK. Rename a folder 1. In the standby mode, select Menu > Messages > Text messages > My folders. 2. Any folders that you have created appear in the display. Scroll to the folder you wish to rename, and select Options > Rename folder. 3. Select and hold Clear to delete the existing entry, then enter the new name for the folder, and select OK to confirm or Back to exit. Delete a folder Only folders created in My folders can be deleted. The Inbox, Sent items, Archive, and Templates folders are protected. When you delete a folder, all messages in the folder are also deleted. 1. 2. Scroll to the folder you wish to remove, and select Options > Delete folder. 3. Select OK to delete or Back to exit. In the standby mode, select Menu > Messages > Text messages > My folders. Delete messages If your message memory is full and you have more messages waiting at the network,
Read some of the unread messages, and delete them. blinks during in standby mode. You can do the following:
42 FCC DRAFT M e s s a g e s
Delete messages from some of your folders. Delete a single message To delete a single message, you need to open it first. 1. In the standby mode, select Menu > Messages > Text messages. 2. Select the folder containing the message you wish to delete. 3. Select a the message you wish to delete, and select Options > Delete. 4. Select OK to delete the message or Back to exit. Delete all messages in a folder 1. In the standby mode, select Menu > Messages > Text messages > Delete messages. 2. Select the folder containing the messages you wish to delete and one of the following:
AllDeletes all messages in all of the folders. All readDeletes any messages which have been read in all of the folders. All unreadDeletes any messages which have not been read in all of the folders. InboxDeletes all messages from the Inbox folder. Sent itemsDeletes all messages from the Sent items folder. ArchiveDeletes all messages from the Archive folder. User defined foldersAll user defined folders that the user has added under My folders are displayed at the end of the predefined folders. 3. Select OK to delete the messages. FCC DRAFT 43 C a l l l o g 6. Call log Call log stores information about the last 20 missed, 20 received, or 20 dialed calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest. Whether viewing missed, received, or dialed calls, the menu options are the same:
Call timeDisplay the date and time of the call. Send messageSend a message to the number. View numberDisplay the number. Use numberEdit the number and associate a name with the number. SaveEnter a name for the number and save it to your contacts list. Add to contactAdd the number to an existing entry in your contacts list, if the number is not associated with a name. DeleteClear the number from memory. CallCall the number. View missed calls The missed calls feature does not function when your phone is switched off. Missed calls are calls that were never answered. 1. In the standby mode, select Menu > Call log > Missed calls. If a missed call notification appears, select List. 2. 3. Scroll to a name or number, and select Options. 4. Select an option. View received calls Received calls are calls that have been answered. 1. 2. Scroll to a name or number, and select Options. 3. Select an option. In the standby mode, select Menu > Call log > Received calls. 44 FCC DRAFT C a l l l o g View dialed numbers Dialed calls are previous numbers you have dialed from your phone:
1. In the standby mode, press the call key. OR In the standby mode, select Menu > Call log > Dialed numbers. 2. Scroll to a name or number, and select Options. 3. Select an option. Call times You can make or receive up to five calls to or from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately. 1. While viewing a missed, received, or dialed call, select Options > Call time. 2. Scroll down to view the most recent call times from this number; select Back to return to the options list. Delete call logs You can delete any missed, dialed, or received calls from phone memory. In the standby mode, select Menu > Call log > Delete recent call lists. 1. 2. Select the type of calls you want to clear: All, Missed, Received, or Dialed. Duration of calls Note: The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. Last call In the standby mode, select Menu > Call log > Call timers >Duration of last call for more information. FCC DRAFT 45 C a l l l o g Show call time on display In the standby mode, select Menu > Call log > Call timers >Duration of last call >
Details > Show call time on display > On or Off. Dialed calls In the standby mode, select Menu > Call log > Call timers >Duration of dialed calls > Details for more information. Received calls In the standby mode, select Menu > Call log > Call timers >Duration of received calls > Details for more information. All calls In the standby mode, select Menu > Call log > Call timers >Duration of all calls for more information. Life timer In the standby mode, select Menu > Call log > Call timers > Life timer. Clear timers In the standby mode, select Menu > Call log > Call timers > Clear timers, enter your security code, and select OK. Duration of data/fax calls Data/fax calls are a network service. See "Network Services," page 7 for more information. If your wireless service provider supports this feature, you can view the size or duration of sent or received data and fax calls. Note: The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. In the standby mode, select Menu > Call log > Data/fax calls and one of the following options:
Last sent data/faxView the size (KB) of the last sent data/fax call. Last received data/faxView the size (KB) of the last received data/fax call. 46 FCC DRAFT C a l l l o g All sent data/faxView the size (KB) of all sent data and fax calls. All received data/faxView the size (KB) of all received data and fax calls. Duration of last data/fax callView the duration time of the last data or fax call. Duration of all data/fax callsView the duration time of all calls. Clear all data/fax logsSelect OK > Yes to clear all data and fax logs. Duration of minibrowser Minibrowser is a network service and a carrier-dependent feature. See "Network Services," page 7, for more information. If your wireless service provider supports this feature, you can view the size or duration of sent or received data from the minibrowser. Note: The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. In the standby mode, select Menu > Call log > Minibrowser calls and one of the following options:
Last sent browser dataView the size (KB) of the last send browser data. Last received browser dataView the size (KB) of the last received data. All sent browser dataView the size (KB) of all sent browser data. All received browser dataView the size (KB) of all received browser data. Last browser sessionView the duration time of the last browser session. All browser sessionsView the duration time of all browser sessions. Clear all browser logsSelect OK > Yes to clear all browser registers. FCC DRAFT 47 P r o f i l e s 7. Profiles Profiles define how your phone reacts when you receive a call or message, how your keypad sounds when you press a key, and more. Ringing options, keypad tones, and other settings for each of the available profiles can be left at their default setting, or customized to suit your needs. The following profiles are available: Normal, Silent, Meeting, Outdoor, and Pager. Profiles are also available for enhancements such as a headset and car kit. See
"Enhancement settings," page 56. Activate In the standby mode, select Menu > Profiles, the profile of your choice, and Activate. Customize a profile You can customize any of the profiles a variety of ways. 1. In the standby mode, select Menu > Profiles, the profile you wish to customize, and Customize. 2. Select the option you want to customize: Incoming call alert, Ringing tone, Ringing volume, Vibrating alert, Light alert, Message alert tone, Keypad tones, Warning tones, Alert for, or Profile name. You cannot rename the Normal profile. Set a timed profile Timed profiles can be used to prevent missed calls. For example, suppose you attend an event that requires your phone be set to Silent before the event starts, but you forget to return it to Normal until long after the event. A timed profile can prevent missed calls by returning your phone to the default profile at a time you specify. 1. In the standby mode, select Menu > Profiles, the profile you want activate and set for timed expiration, and Timed. 2. Enter the time for the profile to expire, and select OK. Timed profiles can be set up to 24 hours in advance. 48 FCC DRAFT 8. Settings S e t t i n g s Use this menu to set or change the time and date settings, call settings, phone settings, tone settings, enhancement settings, security settings, network settings and to restore the factory settings. Call settings Anykey answer Anykey answer allows you to answer an incoming call by briefly pressing any key except the power, right selection, or end key. In the standby mode, select Menu > Settings > Call settings > Anykey answer >
On or Off. Automatic redial Occasionally, your network may experience heavy traffic, resulting in a fast busy signal when you dial. With automatic redial activated, your phone redials the number, and notifies you once the network is available. In the standby mode, select Menu > Settings > Call settings > Automatic redial >On or Off. 1-touch dialing You can activate or deactivate 1-touch dialing. In the standby mode, select Menu > Settings > Call settings > 1-touch dialing >On or Off. Auto-update of service Your phone is capable of receiving updates to network services sent to your phone by your service provider. This feature is a network service. In the standby mode, select Menu > Settings > Call settings > Auto-update of service > On or Off. Minibrowser confirmation You can specify whether or not you want your phone to display messages when you begin or end a browser session. FCC DRAFT 49 S e t t i n g s Select Menu > Settings > Call settings >Minibrowser confirmation and one of the following options:
NoneNo confirmation notes are displayed. On connectionPhone asks you to confirm your awareness to possible charges incurred for Internet access. On exitPhone asks you to confirm your wish to end browsing. BothConfirmation required before connecting to the Internet and before you terminate a browser session. Calling card If you use a calling card for long distance calls, you can save the calling card numbers in your phone. Your phone can store up to four calling cards. Save information 1. 2. Enter your security code, and select OK. 3. Scroll to one of the four memory locations, and select Options > Edit > OK >
In the standby mode, select Menu > Settings > Call settings > Calling card. Dialing sequence . 4. Select one of the following sequence types:
Access no. + phone no. + card no.Dial 1-800 access number, phone number, then card number and PIN, if required. Access no. + card no. + phone no.Dial 1-800 access number, card number and PIN, if required, then phone number. Prefix + phone no. + card no.Dial the prefix (numbers that must precede the phone number) and phone number you want to dial, then card number and PIN, if required. 5. Enter the required information (access number or prefix and card number), and select OK to confirm your entries. 6. Select Card name. 7. Enter the card name, and select OK. Contact your calling card company for more information. 50 FCC DRAFT S e t t i n g s Make calls After you have saved your calling card information in your phone, you can make a call using your calling card. 1. 2. Enter your security code, and select OK. (See "Access codes," page 56.) 3. Scroll to the calling card of your choice, and select Options > OK. In the standby mode, select Menu > Settings > Call settings > Calling card. 4. Press the end key to return to standby mode; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions. 5. Press and hold the call key for a few seconds until Card call is displayed. 6. When you hear the tone or system message, select OK. Data or fax calls Data or fax calls is a network service. See "Network Services," page 7 for more information. If your wireless service provider supports this feature, you can set up the phone to send or receive data or fax calls when a terminal, such as a PDA or PC, is connected. For better performance during data calls, place the phone on a stationary surface. Do not move the phone by holding it in your hand during a data call. For more information on connectivity, refer to the PC/PDA Connectivity Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia website at www.nokia.com/us. 1. In the standby mode, select Menu > Settings > Call settings > Data/fax calls > Incoming data/fax call and one of the following options:
NormalThe phone receives incoming calls as usual. Data calls onlyThe phone receives only data calls. Fax calls onlyThe phone receives only fax calls. 2. Select Data calls only or Fax calls only. 3. When you are finished receiving the fax or data call, repeat steps 1 and 2, and select Normal. FCC DRAFT 51 S e t t i n g s Data transfer You can view the transmission speed when sending or receiving data or fax calls. In the standby mode, select Menu > Settings > Call settings > Data/fax calls >
Data rate display > Graphic or Off. Call summary Your phone can display the time spent on a call when you hang up. In the standby mode, select Menu > Settings > Call settings > Call summary >
On or Off. Phone settings Phone language In the standby mode, select Menu > Settings > Phone settings > Phone language and the language of your choice. The language setting affects the time and date formats of the clock, alarm clock, and calendar. Automatic keyguard You can set the keypad of your phone to lock automatically after a preset time delay. 1. In the standby mode, select Menu > Settings > Phone settings > Automatic keyguard > On or Off. If you select On, Set delay: appears. 2. 3. Enter the delay (in hh:mm format), and select OK. When keyguard is on, it may be possible to dial the emergency number programmed into your phone. Touch tones Touch tones are the tones that sound when you press the keys on your phone keypad. You can use touch tones for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password. 52 FCC DRAFT S e t t i n g s Touch tones are sent during an active call. You can send them manually from your phone keypad, or send them automatically by saving them in your phone. Set type In the standby mode, select Menu > Settings > Phone settings > Touch tones >
Manual touch tones and on of the following options:
ContinuousThe tone sounds for as long as you press and hold a key. FixedUsed to send tones of the duration you specify in the Touch tone length option. OffUsed to turn off tones. No tones are sent when you press a key. Set length You can also specify touch tone length when using the Fixed option. In the standby mode, select Menu > Settings > Phone settings > Touch tones >
Touch tone length > Short (0.1 seconds) or Long (0.5 seconds). Welcome note You can write a welcome note that briefly appears whenever you switch your phone on, if provided by your service provider. Predictive text input is not available for entering welcome note text. 1. In the standby mode, select Menu > Settings > Phone settings > Welcome note. 2. Enter a note (up to 44 characters). Press * to display and select from available special characters. 3. When you are finished, select Options > Save. Select Delete if you want to delete the previous text and begin creating another welcome note. Banner Banner is a network service. See "Network Services," page 7 for more information. If your wireless service provider supports this feature, then you can choose whether the display shows the operator logo when the phone is in the idle state. In the standby mode, select Menu > Settings > Phone settings > Banner >
Default or Customize. FCC DRAFT 53 S e t t i n g s Help text activation Your phone displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 10 seconds and wait for the help text to display. Scroll to page through the full help text, if necessary. The default setting for help text is on. However, you can turn help text on or off. In the standby mode, select Menu > Settings > Phone settings > Help text activation > On or Off. Display brightness You can change the brightness of your phone display. 1. In the standby mode, select Menu > Settings > Phone settings > Display brightness. 2. Scroll up or down to adjust the brightness level to your preference. 3. Select OK to accept your settings. Time and date settings Time Show or hide the clock In the standby mode, select Menu > Settings > Time and date settings > Clock >
Show clock or Hide clock. Set the time 1. In the standby mode, select Menu > Settings > Time and date settings >
Clock > Set the time. 2. Enter the time (in hh:mm format), and select OK. 3. Select am or pm (this option displays only when 12-hour format is in use). Change the format In the standby mode, select Menu > Settings > Time and date settings > Clock >
Time format > 24-hour or 12-hour. 54 FCC DRAFT S e t t i n g s Date Show or hide the date In the standby mode, select Menu > Settings > Time and date settings > Date >
Show date or Hide date. Set the date In the standby mode, select Menu > Settings > Time and date settings > Date >
Set the date, enter the date, and select OK. Change the date format 1. In the standby mode, select Menu > Settings > Time and date settings >
Date > Date format and the format of your choice. 2. With Date on the display, select Date separator, and the separator of your choice. Set the auto-update of date and time Auto-update is a network service. See "Network Services," page 7. If your wireless service provider supports this feature, you can allow the digital network to set the clock, which is useful when you are out of your home area (for example, when you have traveled to another network or time zone). In the standby mode, select Menu > Settings > Time and date settings > Auto-
update of date & time > On, Confirm first, or Off. If you use the Auto-update of date & time option while outside your digital network, you may be prompted to enter the time manually. Network time will replace the time and date when you re-enter your digital network. If your battery has been removed or has discharged outside the digital network, you may be prompted to enter the time manually (once the battery is replaced or recharged, and you are still outside of the digital network). Tone settings From this menu, you can adjust the ringing volume, keypad tones, and other tone settings for the currently active profile. See "Customize a profile," page 48. FCC DRAFT 55 S e t t i n g s Enhancement settings The enhancement settings menu is shown only if the phone is or has been connected to a compatible enhancement. In the standby mode, select Menu > Settings > Enhancement settings > Headset, Handsfree, TTY/TDD, or Charger and the desired accessory. Security settings Restrict calls Call restriction is a network service. See "Network Services," page 7 for more information. If your wireless service providers supports this feature, then you can restrict the calls your phone can make and receive. When calls are restricted, calls still may be possible to the official emergency number programmed into your phone. Contact your service provider for the restriction password. 1. In the standby mode, select Menu > Settings > Security settings > Call restrictions. 2. Enter the security code, and select OK. 3. Select the type of calls you wish to restrict:
Restrict outgoing callsCalls cannot be made. Restrict incoming callsCalls cannot be received. 4. Scroll to an option: Select, Add restriction, Edit, or Delete. Access codes The security and lock codes control access to features and is supplied with the phone. The preset security code is 12345. Once you change the security code, keep the new code secret and in a safe place separate from your phone. Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number. If you enter the wrong security code five times in succession, you will not be able to enter a code for five minutes, even if you power off the phone between incorrect entries. 56 FCC DRAFT S e t t i n g s Phone lock The phone lock feature protects your phone from unauthorized outgoing calls or unauthorized access to information stored in the phone. When phone lock is activated, Phone locked is displayed each time you turn your phone on. When the phone is locked, calls still may be possible to the official emergency number programmed into your phone. 1. In the standby mode, select Menu > Settings > Security settings > Access codes > Phone lock. 2. Enter the lock code and select OK. 3. Select one of the following options:
On turns the phone lock feature on immediately after the phone is turned off and then on. Off immediately turns off the phone lock feature. Call not allowed is displayed if you attempt to place a call while the phone is locked. To answer a call with phone lock on, select Answer or press the call key. Allowed phone number when phone locked When phone lock is on, the only outgoing calls that can be made are to the emergency number programmed into your phone (for example, 911 or other official emergency number) and the number stored in the Allowed number when phone locked location. 1. In the standby mode, select Menu > Settings > Security settings > Access codes > Allowed number when phone locked. 2. Enter the lock code and select OK. 3. Enter the phone number, or select Search, recall the number from the phone book, and select OK. Change the lock code The lock code allows you to access the phone when it is locked. 1. In the standby mode, select Menu > Settings > Security settings > Access codes > Change lock code. 2. Enter the current lock code (default is 1234), and select OK. 3. Enter the new lock code (4 characters), and select OK. FCC DRAFT 57 S e t t i n g s 4. Enter the new lock code again, and select OK. When you change your lock code, make sure you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls. The security code can be used for the lock code. Change the security code The security code is needed for tasks such as deleting all contacts or restoring factory settings. 1. In the standby mode, select Menu > Settings > Security settings > Access codes > Change security code. 2. Enter the current security code (default is 12345), and select OK. 3. Enter the new security code (5 characters), and select OK. 4. Enter the new security code again, and select OK. When you change your security code, make sure you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls. Voice privacy Voice privacy is a network service. See "Network Services," page 7. If your wireless service provider supports this feature, the voice privacy feature protects the privacy of your current phone conversation from other callers placing phone calls on your same network. In the standby mode, select Menu > Settings > Security settings > Voice privacy > On or Off. Network The Network menu allows you to customize the way your phone chooses a network in which to operate while you are within or outside of your primary or home system. In the standby mode, select Menu > Settings > Network > Home only or Automatic. Your phone is set to search for the most cost-effective network. If your phone does not find a preferred network, it selects a network automatically based on the option you choose in the Network. 58 FCC DRAFT S e t t i n g s Network services features The following features are network services. See also "Network Services," page 7. Store a feature code 1. In the standby mode, select Menu > Settings > Network services > Network feature setting. 2. Enter the feature code from your service provider (for example, *900 for activating Forward if busy), and select OK. 3. Select Call forwarding. 4. Scroll to the type of forwarding that matches the feature code you entered
(for example, Forward if busy), select Activate. The activated feature code is now stored in your phone, and you are returned to the Feature code: prompt. Continue entering other feature codes (for example, *900 to cancel Forward if busy), or press the end key to return to standby mode. When you enter a network feature code successfully the feature becomes visible in the Network services menu. Call forwarding Call forwarding tells your network to redirect incoming calls to another number. Call forwarding is a network service and may not work the same in all networks, so contact your wireless provider for availability. Activate This is a network service. All options listed may not appear in the display. Contact your wireless provider for more information. 1. In the standby mode, select Menu > Settings > Network services > Call forwarding and one of the following options:
Forward all callsForwards all calls to the number you specify. Forward if busyForward incoming calls when you are in a call. Forward if not answeredForward incoming calls to another number if you are unable to answer. You can set a delay before forwarding takes place. Forward if out of reachForward incoming calls when your phone is off. FCC DRAFT 59 S e t t i n g s Cancel all call forwardingCancel any call forwarding options you have set. 2. Select Activate. 3. Enter the number to which your calls, data, or other information are forwarded, and select OK. Cancel In the standby mode, select Menu > Settings > Network services > Call forwarding > Cancel all call forwarding. Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details. Call waiting If your wireless provider supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call. 1. During a call, select Answer or press the call key to answer the waiting call. The first call is put on hold. 2. Press the end key to end the active call. Send my caller ID If your wireless service provider supports this feature, then you can prevent your number from appearing on the receiving partys caller ID. In the standby mode, select Menu > Settings > Network services > Send my caller ID > Yes or No. Own number selection In the standby mode, select Menu > Settings > Network services > Own number selection. This feature is carrier dependent. Restore factory settings You can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted, for example, entries in your contacts list are not affected. 1. In the standby mode, select Menu > Settings > Restore factory settings. 60 FCC DRAFT 2. Enter the security code (the default security code is 12345), and select OK. S e t t i n g s FCC DRAFT 61 V o i c e 9. Voice Voice dialing You can dial up to 25 stored numbers using voice dialing. Before using voice tags, note the following:
Voice tags are not language dependent. They are dependent on the speakers voice.
You must say the name exactly as you said it when you recorded it.
Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.
Very short names are not accepted. Use long names, and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. Assign a voice tag to an entry Before you can use voice dialing, you must first assign a voice tag to the number. 1. 2. Highlight the contact you want to assign a voice tag, select Details >
In the standby mode, scroll down to enter the contacts list. Options > Add voice tag. 3. Select Start, then speak clearly into the microphone. Do not select Quit unless you want to cancel the recording. The phone automatically stops recording, saves, and replays the voice tag. appears next to the phone numbers which have voice tags assigned. If recording is not successful, your phone displays Voice system error. Select Options > Add voice tag, and repeat step 3. Dial a number 1. Select and hold Contacts. 2. When you hear several beeps and Please speak now appears, release the key. 62 FCC DRAFT V o i c e 3. Pronounce the voice tag clearly into the microphone. When the phone finds the voice tag, Found: appears, and the phone automatically dials the number. If the phone does not locate a number or recognize the voice tag, No match found appears. Voice tags After you have associated a voice tag to a contact, you can choose one of the following options:
Play back 1. Select Menu > Voice > Voice tags. 2. Scroll to the name with the voice tag you want to hear. 3. Select Options > Playback. Modify 1. Select Menu > Voice > Voice tags. 2. Scroll to the name with the voice tag you want to change. 3. Select Options > Change. 4. Select Start, then speak clearly into the microphone. The phone repeats your voice tag, and Voice tag saved appears. Delete 1. Select Menu > Voice > Voice tags. 2. Scroll to the name with the voice tag you want to erase. 3. Select Options >Delete. Delete voice tag? appears. 4. Select OK to erase the voice tag. Voice commands You can set as many as five voice commands, which allow hands-free operation of certain phone features. Add a voice tag Before using voice commands, you must first add a voice tag to the phone function. FCC DRAFT 63 V o i c e In the standby mode, select Menu > Voice > Voice commands. 1. 2. Select the phone function you wish to tag: Profiles, Voice mailbox, Voice 3. recorder or Call log. If necessary, scroll to an option associated with that function, and select Options > Add command. 4. Select Start, and speak the voice tag clearly into the microphone. Do not select Quit unless you want to cancel the recording. The phone replays then saves the recorded tag. that have voice tags assigned. appears next to commands Activate a voice command After you have associated a voice tag with a phone function, you can issue a command by speaking the voice tag. 1. Select and hold Contacts. 2. When Please speak now appears, pronounce the voice tag clearly into the microphone. When the phone finds the voice tag, Found: appears, and the phone plays the recognized voice tag through the earpiece. The function you requested is activated. Voice tag options After you have associated a voice tag to a command, select one of the following options:
PlaybackListen to the voice command tag. ChangeChange the voice command. DeleteErase the voice command tag. Voice recorder This feature allows you to record speech or sound with your phone and listen to them later. The total available time is 60 seconds if no memos have been stored. The maximum length of a recording depends on how much memory remains available. 64 FCC DRAFT V o i c e Record speech or sound 1. In the standby mode, select Menu > Voice > Voice recorder > Record. 2. After the recorder start tone is heard, begin recording speech or sound. 3. When you are finished recording, select Stop. 4. Enter a name for the recording, and select OK. The recording is saved to the Recordings list. Voice recorder options After you have saved the recording to the Recordings list, highlight the recording, and choose one of the following options:
PlaybackListen to the recording using the earpiece. Delete Erase the recording. Edit titleRename the recording. Add alarmAdd an alarm to the recording. FCC DRAFT 65 O r g a n i z e r 10. Organizer Your phone contains features to help organize your everyday life, including an alarm clock, calendar, calculator, countdown timer, and stopwatch. Alarm clock Set an alarm The alarm clock is based on the phone clock. It sounds an alert any time you specify and even works if the phone is turned off. If an alarm is not set In the standby mode, select Menu > Organizer > Alarm clock. 1. 2. Enter the time for the alarm in hh:mm format, and select OK. 3. Select am or pm if 12-hour clock format is on. Alarm on appears briefly in the display, and appears in standby mode. If an alarm is set 1. 2. Enter the time for the alarm in hh:mm format, and select OK. In the standby mode, select Menu > Organizer > Alarm clock > On. Alarm on appears briefly in the display, and appears in standby mode. Alarm conditions When the alarm sounds, your phone beeps, vibrates (if vibrate alert is on in the currently active profile), and lights up. With the phone on, select Stop to shut the alarm off or Snooze. If you select Snooze, the alarm stops for 10 minutes, and Snooze on appears in the display. If you do not press a key, the alarms stops (snoozes) for 5 minutes, then sounds again. If the alarm time is reached while the phone is switched off, the phone switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the phone for calls. Select No to switch off the 66 FCC DRAFT O r g a n i z e r device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. Turn an alarm off In the standby mode, select Menu > Organizer > Alarm clock > Off. Calendar The calendar keeps track of reminders, calls you need to make, meetings, memo, and birthdays. It can even sound an alarm for any of these events. Monthly view provides an overview of the selected month and weeks. It also allows you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder. Open In the standby mode, select Menu > Organizer > Calendar. To move the cursor in some calendar views, use the scroll keys. Go to a date 1. In the standby mode, select Menu > Organizer > Calendar > Options > Go to date. 2. Enter the date (for example, 15/07/2005), and select OK. Note a specific date You can choose from five types of notes: Meeting, Call, Birthday, Memo, and Reminder. Your phone asks for further information depending on which note you select. You can also set an alarm for your note. 1. Go to the date for which you want to set a reminder. (See "Go to a date,"
page 67.) 2. From the monthly view (with the go to date highlighted), select Options >
Make a note. 3. Select one of the following note types:
MeetingEnter the subject and select Options > Save. Enter a location and select Options > Save. Enter a start and end time. Choose an alarm option. FCC DRAFT 67 O r g a n i z e r CallEnter the phone number and select Options > Save. Enter a name and select Options > Save. Enter a time. Choose an alarm option. BirthdayEnter the persons name and select Options > Save. Enter the year of birth. Choose an alarm option. Enter a time. MemoEnter the subject and select Options > Save. Enter an end date. Choose an alarm option. Enter a time. ReminderEnter the reminder and and select Options > Save. Choose an alarm option. Enter a time. View notes (day view) After you have created some calendar notes, you can view them as follows:
1. In the standby mode, select Menu > Organizer > Calendar. 2. Scroll to the date containing the note. Days with notes appear in bold type. 3. Select Options > View day. 4. To view a highlighted note, select Options > View. Options while viewing a list of notes Select Options while viewing the days notes and one of the following:
ViewView the full note. Make a noteCreate a new note for the selected date. DeleteDelete the note. EditEdit the note. MoveMove the note to another date on your calendar. RepeatEnable the note to recur on a regular basis (daily, weekly, bi-weekly, monthly, and yearly). Tip: Repeat is not available forBirthday note. Go to dateJump to another date on your calendar. Send noteSend the note to another device using text message, or in calendar format. CopyCopy the note. You can then paste the note to another date. SettingsSet the date and time, date and time format, the day each week starts and whether you want your notes to auto-delete after a specified time. 68 FCC DRAFT O r g a n i z e r Send a note 1. In the standby mode, select Menu > Organizer > Calendar. 2. Scroll to the date containing the note you wish to send. Days with notes appear in bold type. 3. Select Options > View day. 4. Scroll to the note you wish to send, and select Options > Send note > Via 5. calendar or Via text msg. If you select Via calendar, enter the number for the recipient; or select Search to retrieve a number from the contacts list, and select OK. The note is sent. If you select Via text msg., select Add number. 6. 7. Enter the number for the recipient; or select Search to retrieve a number from the contacts list, and select OK. 8. Select Options > Send. Receive a note in calendar format When you receive a calendar note, your phone displays Calendar note received. Save the note in your calendar and set an alarm for any date and time. View notes 1. When your phone displays Calendar note received, select Show. 2. Scroll to view the entire message, if necessary. Save notes After viewing the calendar note, select Options > Save. Discard notes After viewing the calendar note, select Options > Discard or select Exit. Calculator The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values. Note: This calculator has a limited accuracy and is designed for simple calculations. FCC DRAFT 69 O r g a n i z e r 1. In the standby mode, select Menu > Organizer > Calculator. 2. Enter the first number in the calculation. Press # for a decimal point if necessary. Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the displayed character. 3. Enter the second number in your calculation. 4. Select Options (equals is highlighted). To perform a square or square root calculation, select Options > Square or Square root. Select Options > Change sign or scroll to change the sign of your result. Currency converter You can convert foreign currency to domestic, or vice versa. 1. At the Calendar screen, enter a currency amount to convert. 2. Select Options > To home or To foreign. To homeconverts foreign currency to domestic currency. To foreignconverts domestic currency to foreign currency. If you have not done so already, you are prompted to enter the exchange rate. 3. Enter the exchange rate (press # to insert a decimal), and select OK. You can also edit the exchange rate at any time. Note: When you change base currency, you must key in the new rates because all previously set exchange rates are set to zero. 1. In the standby mode, select Menu > Organizer > Calculator > Options >
Exchange rate > Foreign unit expressed in domestic units or Domestic unit expressed in foreign units. Foreign unit expressed in domestic unitsThe number of home units it takes to make one unit of foreign currency. Domestic unit expressed in foreign unitsThe number of foreign units it takes to make one unit of your home currency. 2. Enter the exchange rate, and select OK. 70 FCC DRAFT O r g a n i z e r Countdown timer You can enter a specified time (up to 99 hours and 59 minutes). When the time runs out, your phone sounds an alarm. The countdown timer only works when the phone is on. Once you turn off your phone, the timer is no longer active. In the standby mode, select Menu > Organizer > Countdown timer. Set the countdown timer 1. 2. Enter the time (in hh:mm format), and select OK. 3. Enter a note for the timer, and select OK. appears in standby mode when the countdown timer is set. When the time runs out, your phone sounds an alarm, displays the timer note, and flashes its lights.
Press any key during the alarm to stop the timer.
After 30 seconds the timer alert expires automatically. Change the time After you have set the timer, you can change the time. 1. In the standby mode, select Menu > Organizer > Countdown timer > Change time. 2. Enter the new time, and select OK. 3. Leave the note as it was, or enter a new note, and select OK. Stop the timer before the alarm sounds After you have set the timer, you can stop the timer. In the standby mode, select Menu > Organizer > Countdown timer > Stop timer. Stopwatch Your phone has a stopwatch that can be used to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:ss format. FCC DRAFT 71 O r g a n i z e r Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Split or lap time Use the split time or lap time functions for activities where you need to pace yourself. 1. In the standby mode, select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start. Split timingYou can use the split time function for such activities as a long distance race when you need to pace yourself. Select Split to note the lapsed time. The timer continues to run and the split time appears below the running time. Each time you select Split, the new measured time appears at the beginning of the list. Lap timingYou can use the Lap time function when you want to track how long it takes to complete each cycle or lap. Select Lap to note the lap time. The clock stops, then immediately from zero. The lap time appears below the running time. Each time you select Lap, the new measured time appears at the beginning of the list. 2. Select Stop to end timing and display total time. Save, view or delete times To save a time while the clock is running, select Stop > Options > Save, enter a name for the measurement, and select OK. If you do not enter a name, the total time is used as the default title for the lap or split time. To view the last measured time, select Menu > Organizer > Stopwatch > Split timing or Lap timing > Show last time. To browse saved times, select Menu > Organizer > Stopwatch > Split timing or Lap timing > View times. To delete a saved time, select Menu > Organizer > Stopwatch > Split timing or Lap timing > View times. Select the time you wish to delete and Options > Delete times. Select OK at Delete?
You can delete saved times with the Delete all or One by one option. 72 FCC DRAFT O r g a n i z e r Operation note If you press the end key and return to standby mode, the clock continues to run in the background, and To return to the stopwatch screens, do the following:
1. 2. To stop the clock, select Stop. In the standby mode, select Menu > Organizer > Stopwatch > Continue. appears in the upper left corner of the screen. FCC DRAFT 73 G a m e s 11. Games Challenge yourself or a friend to one of the fun games in your phone. Some menus listed are network services. Contact your wireless provider for more information. Play a game 1. In the standby mode, select Menu > Games > Select game. 2. Scroll to a game. 3. Options and submenus vary with each game. Select one of the following options, if supported by the game:
New gameLaunches a new game. High scoresView the high scores for this game (if previously played). InstructionsView instructions for playing the game. Select More for more information. Game settings In the standby mode, select Menu > Games > Settings > Game sounds, Game lights, or Shakes. 74 FCC DRAFT 12. Minibrowser M i n i b r o w s e r Minibrowser is a carrier dependent feature and a network service. See "Network Services," page 7, for more information. Your phone has a built-in browser you can use to connect to selected services on the mobile Internet. If your wireless service provider supports this feature, you can view weather reports, check news or flight times, view financial information, and much more. The web browser on your phone can display WAP-based content. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security and content, as you would with any Internet site. Mobile Internet access Because mobile Internet content is designed to be viewed from your phone, your wireless provider is now your mobile Internet service provider as well. Your wireless provider has created a home page and set up your browser to go to this page when you log on to the mobile Internet. Once at your service providers home page, you may find links to a number of other sites. It should not be necessary to manually configure the browser on your phone. Normally this is done by your wireless provider when you subscribe to the feature. Contact your wireless provider if you have problems using the browser. Sign on to the mobile Internet In the standby mode, select Menu >Minibrowser > Connect. After a brief pause, your phone attempts to connect to your wireless providers home page. If you receive an error message, your phone may not be set up for browsing. Contact your wireless provider to make sure that your phone is configured properly. Navigate the mobile Internet Since your phone screen is much smaller than a computer screen, mobile Internet content is displayed differently than you may be accustomed to seeing. This section contains guidelines for using phone keys to navigate a WAP site. FCC DRAFT 75 M i n i b r o w s e r Phone keys
To browse the WAP site, scroll up or down.
Select a highlighted item.
To enter text, press # to switch text input modes and then press 0-9.
To enter special characters, press *. Even if the broswer page does not have a Back option, you can also press the end key to go back one page. Receive a call while online Depending on your wireless service provider, you may still be able to receive a voice call while using the WAP browser.
To answer the incoming call, press the call key.
To reject the incoming call, press the end key. After you end your voice call, the mobile Internet connection automatically resumes. If your wireless service provider does not support incoming calls while browsing, incoming calls are automatically forwarded to voice mail. Make an emergency call while online You can end your data connection and make an emergency call. 1. To close your mobile Internet connection, press the end key. 2. Press the end key as many times as needed to clear the display and ready the phone for calls. 3. Enter the emergency number for your present location (for example, 911). Emergency numbers vary by location. 4. Press the call key. Disconnect To close your mobile Internet connection, press and hold the end key. 76 FCC DRAFT 13. PC connectivity P C c o n n e c t i v i t y With the PC Suite you can, for example, create and send text and picture messages, synchronise contacts and calendar between your phone and a compatible PC. You may find more information for PC suite in the support area on the Nokia web site, www.nokia.com. Some of the features in PC Suite are carrier dependent. FCC DRAFT 77 E n h a n c e m e n t s 14. Enhancements Check the model number of any charger before use with this device. This device is intended for use when supplied with power from Nokia ACP-7 charger. Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. A few practical rules about accessories and enhancements:
Keep all accessories and enhancements out of the reach of small children.
When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.
Check regularly that enhancements installed in a vehicle are mounted and are operating properly.
Installation of any complex car enhancements must be made by qualified personnel only. Power
Standard 900-mAh Li-Ion Battery (BL-5C)
Retractable Charger (AC-1)
Travel Charger (ACP-12)
Standard Travel Charger (ACP-7)
Mobile Charger (LCH-12) Audio
Headset (HS-5)
Retractable Headset (HS-10)
Boom Headset (HDB-4)
FM Stereo Headset (HS-2R)
Loopset (LPS-4) 78 FCC DRAFT E n h a n c e m e n t s Warning: When using the headset your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Data
Data Cable (CA-42)
Desk Stand with Sync (DCV-14) Car
Car Installation Kit (CARK-126)
Headrest Handsfree (BHF-1)
Mobile Holder (MBC-15S)
Full Car Kit (CK-6) Covers
Xpress-on Color Covers FCC DRAFT 79 R e f e r e n c e i n f o r m a t i o n 15. Reference information This section provides information about your phone batteries, enhancements, chargers, safety guidelines and technical information. Be aware that the information in this section is subject to change as batteries, chargers, and enhancements change. Batteries and chargers Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, buy a new battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave the battery connected to a charger after the battery has finished charging. Overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Temperature extremes can affect the ability of your battery to charge. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59F and 77F (15C and 25C). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. 80 FCC DRAFT C a r e a n d m a i n t e n a n c e Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage and enjoy your device for many years.
Keep the device and all its parts and enhancements out of the reach of small children.
When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.
Check regularly that enhancements installed in a vehicle are mounted and are operating properly.
Installation of any complex car enhancements must be made by qualified personnel only.
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
Do not paint the device. Paint can clog the moving parts and prevent proper operation.
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.
Use chargers indoors. FCC DRAFT 81 C a r e a n d m a i n t e n a n c e All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. Before sending your device to a service facility, create a backup of data you want to keep such as contacts and calendar notes. 82 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n Additional safety information Operating environment Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 7/8 inch (2.2 cm) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device at least 7/8 inch
(2.2 cm) away from your body. Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with a hearing aid should not hold the device to the ear with the hearing aid. Always secure the device in its holder, because metallic materials may be attracted by the earpiece. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 6 inches
(15.3 cm) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. To minimize the potential for interference, persons with pacemakers should FCC DRAFT 83 A d d i t i o n a l s a f e t y i n f o r m a t i o n
Always keep the device more than 6 inches (15.3 cm) from their pacemaker when the device is switched on
Not carry the device in a breast pocket
Hold the device to the ear opposite the pacemaker If you have any reason to suspect that interference is taking place, switch off your device immediately to minimize the potential for interference. Hearing Aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as 84 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. FCC regulations prohibit using your wireless device while in the air. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both. Emergency calls Important: Wireless phones, including this phone, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless phone for essential communications like medical emergencies. To make an emergency call:
1. 2. Press the end key as many times as needed to clear the display and ready the If the phone is not on, switch it on. Check for adequate signal strength. phone for calls. 3. Enter the official emergency number for your present location. Emergency numbers vary by location. 4. Press the call key. If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider. When making an emergency call, give all the necessary information as accurately as possible. Your wireless phone may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. Certification Information (SAR) THE RH-77 DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by international guidelines (ICNIRP). These limits establish permitted levels of RF energy for the general population. The guidelines are based FCC DRAFT 85 A d d i t i o n a l s a f e t y i n f o r m a t i o n on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards and guidelines include a substantial safety margin designed to assure the safety of the public, regardless of age and health and to account for any variations in measurements. The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be well below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value when tested according to international testing procedures for use at the ear for device type RH-77 is 0.75 W/kg. The device type is listed on the label located under the battery. SAR values may vary depending on national reporting and testing requirements and the network band. Use of device accessories and enhancements may result in different SAR values. Additional SAR information may be provided under product information at www.nokia.com. USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged over one gram of tissue. Device type RH-77 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.23 W/kg and when properly worn on the body is 1.06 W/kg. Information about this device can be found on the FCC's website at www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: QMNRH-77. Technical information Feature Dimensions Specification Width 42.2 mm Length 102.4 mm Depth 21.5 mm Weight 90 g with BL-5C Li-Ion Battery Wireless networks CDMA 800 86 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n Feature Volume Specification 69 cu cm Frequency range (Tx) Cellular: 824.70848.37 MHz Frequency range (Rx) Cellular: 869.70893.37 MHz Battery information This section provides information about battery charging times with the Standard Charger (ACP-7), the Mobile Charger (ACP-12), talk-times, and standby times. Be aware that the information in this section is subject to change. For more information, contact your service provider. Charging times The following charging times are approximate:
Charger options ACP-12 ACP-7 BL-5C 900 mAh Li-Ion battery Up to 1.5 hours Up to 3 hours Talk and standby times Operation times are estimates only and depend on signal strength, phone use, network conditions, features used, battery age and condition (including charging habits), temperatures to which the battery is exposed, and many other factors. Function Talk time Standby time Digital 3.5 to 4.5 hours 111 to 169 hours Patent information Manufactured or sold under one or more of the following US patents:
D405445 5491718 5758278 5887250 6025802 6088342 6377813 6486835 D406583 5596571 5790957 5887252 6029065 6148209 6414640 6496150 FCC DRAFT 87 A d d i t i o n a l s a f e t y i n f o r m a t i o n D414189 5642377 5793744 5889770 6047071 6154455 6434186 6570909 D405784 5699482 5796757 5929813 6055264 6167038 6459689 6580771 D423515 5701392 5802465 5990740 6072787 6205325 6463031 6587685 4969192 5708656 5821891 5991627 6076181 6253075 6466173 5440597 5737323 5854978 6005889 6078570 6292474 6480700 5444816 5754976 5859843 6009129 6084471 6332083 6480155 Others 4558302 4901307 5056109 5101501 5109390 5265119 RE32580 88 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n Appendix A Message from the CTIA
(Cellular Telecommunications &
Internet Association) to all users of mobile phones 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 FCC DRAFT 89 A d d i t i o n a l s a f e t y i n f o r m a t i o n Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voicealmost anywhere, anytimewith the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing.But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehiclewhether on the phone or not.The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sensekeep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same. But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need. When it comes to the use of wireless phones, safety is your most important call. Wireless Phone "Safety Tips"
Below are safety tips to follow while driving and using a wireless phone which should be easy to remember. 1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. 2. When available, use a hands-free device. A number of hands-free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you. 90 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n 3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. 4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road. 5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a "to do" list while driving a car, you are not watching where you are going. Its common sense. Dont get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles. 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tipdial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situationswith your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a "Good Samaritan" in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. 10. Call roadside assistance or a special wireless nonemergency assistance number when necessary. Certain situations you encounter while driving may FCC DRAFT 91 A d d i t i o n a l s a f e t y i n f o r m a t i o n require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.The wireless industry reminds you to use your phone safely when driving.For more information, please call 1-888-
901-SAFE. For updates: www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85 92 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n Appendix B Message from the FDA
(U.S. Food and Drug Administration) to all users of mobile phones. July 18, 2001For updates: www.fda.gov/cdrh/phones FCC DRAFT 93 A d d i t i o n a l s a f e t y i n f o r m a t i o n Consumer Update on Wireless Phones U.S. Food and Drug Administration 1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. 2. What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:
Support needed research into possible biological effects of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health. FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated 94 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n efforts at the federal level. The following agencies belong to this working group:
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration The National Institutes of Health participates in some interagency working group activities, as well. FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document. 3. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-
in antennas, often called cell mobile or PCS phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the users head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-
called cordless phones; which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits. 4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments FCC DRAFT 95 A d d i t i o n a l s a f e t y i n f o r m a t i o n investigating the effects of radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we dont know with certainty what the results of such studies mean for human health. Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years. 5. What research is needed to decide whether RF exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do
- may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used. 96 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n 6. What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world. 7. How can I find out how much radiofrequency energy exposure I can get by using my wireless phone?
All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC established these guidelines in consultation with FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the bodys ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects. Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (www.fcc.gov/oet/rfsafety) gives FCC DRAFT 97 A d d i t i o n a l s a f e t y i n f o r m a t i o n directions for locating the FCC identification number on your phone so you can find your phones RF exposure level in the online listing. 8. What has FDA done to measure the radiofrequency energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines. 9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?
If there is a risk from these productsand at this point we do not know that there isit is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. 98 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n 10.What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. 11.What about wireless phone interference with medical equipment?
Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a accompanied hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem. FCC DRAFT 99 A d d i t i o n a l s a f e t y i n f o r m a t i o n 12.Where can I find additional information?
For additional information, please refer to the following resources:
FDA web page on wireless phones www.fda.gov/cdrh/phones/index.html
Federal Communications Commission (FCC) RF Safety Program www.fcc.gov/oet/rfsafety
International Commission on Non-Ionizing Radiation Protection www.icnirp.de
World Health Organization (WHO) International EMF Project www.who.int/emf
National Radiological Protection Board (UK) www.nrpb.org.uk/
July 18, 2001For updates: www.fda.gov/cdrh/phones 100 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n Nokia One-Year Limited Warranty Nokia Inc. (Nokia) warrants that this cellular phone (Product) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions:
1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. This one year period is extended by each whole day that the Product is out of your possession for repair under this warranty. 2. The limited warranty extends only to the original purchaser (Consumer) of the Product and is not assignable or transferable to any subsequent purchaser/end-user. 3. The limited warranty extends only to Consumers who purchase the Product in the United States of America. 4. During the limited warranty period, Nokia will repair, or replace, at Nokias sole option, any defective parts, or any parts that will not properly operate for their intended use with new or refurbished replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. No charge will be made to the Consumer for any such parts. Nokia will also pay for the labor charges incurred by Nokia in repairing or replacing the defective parts. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-
operative parts. Nokias limit of liability under the limited warranty shall be the actual cash value of the Product at the time the Consumer returns the Product for repair, determined by the price paid by the Consumer for the Product less a reasonable amount for usage. Nokia shall not be liable for any other losses or damages. These remedies are the Consumers exclusive remedies for breach of warranty. 5. Upon request from Nokia, the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt. 6. The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty. FCC DRAFT 101 A d d i t i o n a l s a f e t y i n f o r m a t i o n 7. The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:
1. The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of Nokia, including damage caused by shipping. 2. The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, damage caused by computer or Internet viruses, bugs, worms, Trojan Horses, cancelbots or damage caused by the connection to other products not recommended for interconnection by Nokia. 3. Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period. 4. The Product serial number plate or the enhancement data code has been removed, defaced or altered. 5. The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna, or viruses or other software problems introduced into the Product. 8. Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:
1. The Consumer shall return the Product to the place of purchase for repair or replacement processing. 2. If a is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to:
Nokia Inc., Attn: Repair Department 795 West Nasa Blvd. Melbourne, FL 32901 102 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n 3. The Consumer shall include a return address, daytime phone number and/
or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty. 4. The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product. 5. Nokia will repair the Product under the limited warranty within 30 days after receipt of the Product. If Nokia cannot perform repairs covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, Nokia at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage. In some states the Consumer may have the right to a loaner if the repair of the Product takes more than ten (10) days. Please contact the Customer Service Center at Nokia at the telephone number listed at the end of this warranty if you need a loaner and the repair of the Product has taken or is estimated to take more than ten (10) days. 6. If the Product is returned during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect. If the Product is returned after the expiration of the limited warranty period, Nokias normal service policies shall apply and the Consumer will be responsible for all shipping charges. 9. You (the Consumer) understand that the product may consist of refurbished equipment that contains used components, some of which have been reprocessed. The used components comply with Product performance and reliability specifications. 10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE CONSUMERS SOLE AND EXCLUSIVE REMEDY FCC DRAFT 103 A d d i t i o n a l s a f e t y i n f o r m a t i o n AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED. 11. Some states do not allow limitation of how long an implied warranty lasts, so the one year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This limited warranty gives the Consumer specific legal rights and the Consumer may also have other rights which vary from state to state. 12. Nokia neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty including the provider or seller of any extended warranty or service agreement. 13. This is the entire warranty between Nokia and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, relating to the Product, and no representation, promise or condition not contained herein shall modify these terms. 14. This limited warranty allocates the risk of failure of the Product between the Consumer and Nokia. The allocation is recognized by the Consumer and is reflected in the purchase price. 15. Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following purchase of the Product. 104 FCC DRAFT A d d i t i o n a l s a f e t y i n f o r m a t i o n 16. Questions concerning this limited warranty may be directed to:
Nokia Inc. Attn: Customer Service 7725 Woodland Center Blvd., Ste. 150 Tampa, FL 33614 Telephone: 1-888-NOKIA-2U (1-888-665-4228) Facsimile: (813) 287-6612 TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542) 17. The limited warranty period for Nokia supplied attachments and accessories is specifically defined within their own warranty cards and packaging. FCC DRAFT 105 I n d e x Index NUMERICS 1-touch dialing 28 A alarm clock 66 antenna 15 anykey answer 49 automate voice mail 39 automatic redial 49 auto-update 55 B back cover removing 15 replacing 16 batteries and chargers 80 battery charging 16 charging times 88 removing 15 replacing 16 talk and standby times 89 business cards 32 C calculator 69 calendar 67 call duration 45 forward 59 log 44 caller groups 28 calling cards 50 calls answering 20 in-call options 21 making 19 care and maintenance 81 certification information (SAR) 85, 87 charger connecting 16 information 80 106 FCC DRAFT times 88 contacts list 25 add 25 delete 31, 32 edit 29 send 32 countdown timer 71 currency converter 70 customer care 9 D dialing codes 26 display language 52 E emergency calls 52, 76, 85 enhancement settings 56 enhancements 78 ESN 9 exchange rate 70 F FCC information 85, 87 feature codes 59 G games 74 H headset 17 help 9 help text 14, 54 I indicators and icons 12 K keyguard automatic 52 lock and unlock 21 I n d e x FCC DRAFT 107 I n d e x L languages 52 loudspeaker 20 M message folders 41 messages delete 42 minibrowser messages 40 picture messages 39 text messages 34 voice messages 38 minibrowser 75 minibrowser messages 40 N network services 7 O organizer 66 P patent information 89 phone settings 52 picture messages 39 predictive text 23 profiles 48 Q quick keys 12 R restore factory settings 60 restrict calls 56 S safety 6 scrolling 14 security 56 set date 55 time 54 108 FCC DRAFT I n d e x settings 49 shared memory 8 shortcuts 14 standby mode 12 start screen 12 stopwatch 71 T talk and standby times 89 technical information 88 text entry 22 messages 34 time and date settings 54 timed profiles 48 tone settings 55 touch tones 52 turn phone on and off 17 V view call duration 45 call times 45 data/fax call duration 46 dialed numbers 45 minibrowser duration 47 missed calls 44 picture messages 40 received calls 44 saved messages 41 voice commands 63 dialing 62 messages 38 privacy 58 recorder 64 voicemail 38 volume adjusting 20 using the loudspeaker 20 W warranty 9 welcome note 53 wireless Internet 75 disconnect 76 make an emergency call 76 receive a call while online 76 FCC DRAFT 109 I n d e x sign on 75 X Xpress-on covers 17 110 FCC DRAFT
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-05-14 | 824.7 ~ 848.31 | TNE - Licensed Non-Broadcast Transmitter Held to Ear | Class II permissive change or modification of presently authorized equipment |
2 | 2005-03-21 | 824.7 ~ 848.31 | TNE - Licensed Non-Broadcast Transmitter Held to Ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2005-05-14
|
||||
1 2 |
2005-03-21
|
|||||
1 2 | Applicant's complete, legal business name |
Microsoft Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0021495809
|
||||
1 2 | Physical Address |
1 Microsoft Way
|
||||
1 2 |
Redmond, Washington 98052
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
h******@atcb.com
|
||||
1 2 |
h******@americantcb.com
|
|||||
1 2 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
QMN
|
||||
1 2 | Equipment Product Code |
RH-77
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
H****** S********
|
||||
1 2 | Title |
Director, EMC, SI and RF Compliance
|
||||
1 2 | Telephone Number |
425-7********
|
||||
1 2 | Fax Number |
425-7********
|
||||
1 2 |
h******@microsoft.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Nokia Inc.
|
||||
1 2 |
Nokia Inc
|
|||||
1 2 | Name |
M****** W******
|
||||
1 2 | Physical Address |
12278 Scripps Summit Drive
|
||||
1 2 |
San Diego, California 92131
|
|||||
1 2 |
United States
|
|||||
1 2 |
s******@nokia.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | TNE - Licensed Non-Broadcast Transmitter Held to Ear | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CDMA 800 Cellular Phone | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output is ERP. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 2.2 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Head: 1.33 W/kg; Body-worn 1.06 W/kg. | ||||
1 2 | Power Output is ERP. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 2.2 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Head: 1.23 W/kg; Body-worn 1.06 W/kg. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
n/a | ||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | BC | 824.70000000 | 848.31000000 | 0.1780000 | 300.0000000000 Hz | 1M25F9W | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 22H | BC | 824.70000000 | 848.31000000 | 0.1780000 | 300.0000000000 Hz | 1M25F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC