all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
LXT560-Owners-Manual | Users Manual | 1.10 MiB | October 15 2019 | |||
1 2 |
|
User Manual | Users Manual | 2.02 MiB | ||||
1 2 | Cover Letter(s) | October 15 2019 | ||||||
1 2 | Cover Letter(s) | October 15 2019 | ||||||
1 2 | Attestation Statements | |||||||
1 2 | Attestation Statements | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Setup Photos |
1 2 | LXT560-Owners-Manual | Users Manual | 1.10 MiB | October 15 2019 |
Welcome to the world of Midland electronics Congratulations on your purchase of a high quality MIDLAND product. Your 2-way radio represents state-of-the-art high-tech engineering. Designed for FRS (Family Radio Service) operation, this compact package is big on performance. It is a quality piece of electronic equipment, skillfully constructed with finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your two-way radio is designed for reliable and trouble-free performance for years to come. the Features
- 36 FRS Channels
- 121 Privacy Codes (38 CTCSS / 83 DCS)
- VOX
- Selectable Call Alert
- NOAA Weather Scan
- NOAA Weather Radio
- NOAA Weather Alert
- Scan Function
- Monitor Function
- Roger Beep Tone
- Silent Operation
- Key Pad Lock
- High / Low Power Settings
- Speaker / Microphone Jacks
- Battery Meter / Battery Low Indicator This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device does not cause harmful interference, and (2) this radio must accept any interference that may cause undesired operation. To maintain compliance with FCCs RF exposure guidelines, for body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with Midland Radio Corp. accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. CHARGING THE BATTERY PACK Your radio is equipped for using a rechargeable NiMH battery pack which can be recharged by inserting the AC adapter into the radio charge jack, or with optional desktop charger (as described below). Initial charge time is 24 hours. Charge time is about 12 hours thereafter. For maximum battery life, we recommend charging the battery pack when the low battery icon comes on. Remove the radios from the charger when the charge time expires. To charge using a Desktop Charger:
1. Place the rechargeable battery packs in the radios. 2. Connect the AC adapter into an AC wall outlet. 3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if charging in vehicle) into the desktop charger jack. 4. Place the units into the desktop charger slot and note that the LED indicator with RED color will light up, indicating charging function. In order to ensure that the battery pack is fully charged, it is recommended that the battery pack be charged for at least 12 hours with the radio turned OFF.
!
1. Only use our NiMH battery pack and AC adapter. 2. Do not attempt to charge alkaline batteries or any batteries or battery packs other than the one indicated in the manual. This may cause leakage and damage to the radio. 3. For long term storage of the radio, turn the radio OFF and remove the batteries from the radio. BATTERY LEVEL INDICATOR Your radio has a BATTERY LEVEL METER that shows the battery power level. The greater the number of bars visible, the stronger the battery level. When the battery level is low, the Battery Shell icon will flash in the display indicating your batteries should be replaced or recharged if using a rechargeable battery pack. MIDLAND RADIO CORPORATION 5900 Parretta Drive Kansas City, MO 64120 Call 816.241.8500 Wed love to hear from you! Let us know what you think of your new Midland product at or by visiting us at midlandusa.com Note: Features & Specifications are subject to change without notice. MIDLAND is not responsible for unintentional errors or omissions on its packaging. Rev B IMPORTANT NOTICE LCD DISPLAY Exposure To Radio Frequency Energy Your Midland radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:
- United States Federal Communications Commission, Code of Federal Regulations: 47 CFR part 2 sub-part J
- American National Standards Institute (ANSI)/Institute of Electrical &
Electronic Engineers (IEEE) C95. 1-1992
- Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999 1 2 3 4 5 Edition
- National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986
- International Commission on Non-lonizing Radiation Protection
(ICNIRP) 1998 To control your exposure and ensure compliance with the general population or uncontrolled environment exposure limits, transmit no more than 50% of the time. The radio generates measurable RF energy exposure only when transmitting. CONTROLS 1. KEY LOCK ICON Indicates KEY LOCK mode is on. 2. VOX ICON Indicates when VOX mode is active. 3. NOAA WEATHER (WX) BAND ICON Indicates when the radio is in Weather Band mode. 4. CHANNEL NUMBER Changes from 1~36 on FRS band (1~10 on WX band). 5. PRIVACY CODE Indicates Privacy Code selected by user (oF~38/oF~83). It can only be set in Ch 1~22. 6. BATTERY METER Indicates the battery 6 7 8 9 10 level. 7. RECEIVE (RX) ICON Indicates radio is receiving a transmission. 8. TRANSMIT (TX) ICON Indicates radio is transmitting a signal. 9. TRANSMIT POWER LEVEL ICON Indicates TX Power setting (H/L). 10. PRIVACY CODE ICON Indicates Privacy Code setting (CTCSS/DCS). BATTERY INSTALLATION Your radio operates with either a NiMH battery pack or optional 4 AAA alkaline batteries. The belt clip should be removed (see below) to ease installation or removal of the batteries. To install the batteries:
1. With the back of the radio facing you, remove the belt clip (see diagram below) for easy access, then remove the Battery Cover by pressing down on the top center and sliding it down from the radio. 2. Insert 4 AAA batteries observing the polarity as shown. Installing the batteries incorrectly will prevent the unit from operating or may damage the unit. 3. Return the Battery Cover by sliding it up on the radio. Replace the belt clip, making sure it locks into place. Body-Worn Operation If you wear the radio on your body when transmitting always use Midland-
supplied or approved belt clip, holster, case, or body harness for this product. Use of any accessories not supplied or approved by Midland may exceed FCC/Health Canada RF exposure guidelines. If you do not use any accessories supplied or approved by Midland, ensure the radio and its antenna are at least 1 inch (2.5cm) from your body when ransmitting. 15 16 17 18 19 11. PTT Button Press and hold to transmit voice communication. 12. CALL/LOCK Button Press to send a CALL ALERT signal. Press and hold to turn KEY LOCK on/off. 13. MIC Built-in microphone. 14. SPEAKER Built-in speaker. 15. ANTENNA 16. EXTERNAL SPEAKER/MIC/CHG. JACK 17. POWER / MENU Button Press and hold for at least 3 seconds to turn the radio on/off. Press momentarily to access Menu mode. 18. MONITOR/SCAN Button Press to enter SCAN mode. Press and hold to enter MONITOR mode. 19. UP/WX SCAN s and DOWN t Buttons Make adjustments in MENU mode. Press and hold the UP button for 5 seconds to activate the NOAA Weather Scan function. 11 12 13 14 BATTERY COMPARTMENT BATTERY COMPARTMENT COVER Press here and push down to open BELT CLIP LOCK TAB BELT CLIP LATCH INSTALLING THE BELT CLIP To install the BELT CLIP, slide the clip up into the slot on the back of the radio until the BELT CLIP LATCH clicks. To remove the BELT CLIP, press the LOCKTAB up, then gently pull the belt clip down toward the bottom of the radio. OPERATING YOUR RADIO POWER ON/OFF AND VOLUME Press the POWER/MENU button for at least 3 seconds to turn the radio on/off. During Power On, the radio will beep 2 times with different tones, the LCD will display all icons for 1 second and the LCD display will indicate the last channel selected. To increase/decrease the volume level, press the s\t buttons during RX or STANDBY mode. TRANSMITTING AND RECEIVING A CALL To communicate, all radios in your group must be set to the same channel and/or Privacy Code. 1. For maximum clarity, hold the radio 2 to 3 inches from your mouth. 2. Press and hold the PTT button and speak in a normal voice into the microphone. The TX icon will appear continuously on the LCD display while transmitting. 3. To receive a call, release the PTT button. The RX icon will appear on the display when your radio is receiving a transmision. ABOUT RANGE Your LXT Series radios are designed to give you maximum range under optimum conditions. Optimum Conditions are:
l Over water l Open rural areas without obstructions l Flat areas where you can see the other person To ensure you get maximum range:
l Be sure to use fresh or fully charged batteries - low batteries will cause low power conditions. l Be sure to set your radio to use Hi power. LXT560 SERIES QUICK REFERENCE CHART MENU Channel Privacy Power VOX Roger Beep Call Alert Silent Operation 1~36 H/L oF/1/2/3 On/Off 1~5 On/Off CTCSS oF~38 DCS oF~83 Press and hold UP/WX button for 5 seconds WX Scan WX Channel WX Alert 1~10 1~10 On/Off MONITOR Pressing and holding the MONITOR button for 3 seconds will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This could also be used to check any activity on your current channel before transmitting. Press and hold the MONITOR button for 3 seconds again to get out of MONITOR mode. SCAN Your radio can scan all 36 channels for activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 36 channels and stop on any active channel for 4 seconds before resuming scan. When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel. To resume scanning, quickly press the SCAN button. CALL ALERT Your radio can transmit a call alert for a fixed length of time. To send a call alert, press the CALL button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation. KEYPAD LOCK To avoid accidentally changing the radio setting, press the LOCK button for 4 seconds. The KEY LOCK icon will appear on the display. PTT and CALL will still be active. Repeat the same procedure to unlock the keypad. CHANNEL SELECTION (FRS BAND) Press the MENU button once, and then the s\t buttons to select one of the 36 FRS channels. To confirm the selection, press the PTT button or press the MENU button again to move to the next feature setting. SETTING PRIVACY CODES Your radio has 121 Privacy Codes available to use in channels 1~22. You may select a different Privacy Code for each channel. To select a Privacy Code for the current channel press the MENU button twice, and then the s\t buttons to select one of the 38 CTCSS Privacy Codes. Press the MENU button again and then the s\t buttons to select one of the 83 DCS Privacy Code. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode. To confirm the selection, press the PTT button or press the MENU button again to move to the next feature setting.
!
Note : If you select a CTCSS Privacy Code, any pre-selected DCS Privacy Code will be cancelled and vice-versa. Selecting a Privacy Code of "oF" will disable the Privacy feature. To communicate between two radios, all radios in your group must be set to the same channel and/or Privacy Code selections. The Privacy Code can only be set in channels 1~22. TRANSMIT (TX) POWER LEVEL SELECTION Your radio has 2 power level settings. To select the power level on channels 1~7 and 15~36, press the MENU button until a Pr icon will appear blinking on the display. Then press the s\t buttons to select TRANSMIT POWER LEVEL icon (H: Hi/L: Lo). To confirm, press the PTT button or press the MENU button again to move to the next feature setting. When the PTT button is pressed during Low Battery Level condition, the TX Power will automatically switch from Hi(H) to Lo(L) level.
!
Note : You cannot adjust the power setting on channels 8~14. They are set to Lo power per FCC regulations. VOX Your radio has 3 VOX level settings: (oF/1/2/3). To set VOX, press the MENU button until the display shows VOX blinking while on the right of the CHANNEL NUMBER display, an oF icon appears. Select 1,2 or 3 by pressing the s\t buttons and push the PTT key, or press the MENU button again to move to the next feature setting. VOX will be more sensitive on the 1 setting than on the 3 setting. To turn VOX off, press the MENU button until the display shows VOX blinking while on the right of the CHANNEL NUMBER display, a 1,2 or 3 icon appears. Select oF by pressing the s\t buttons and push the PTT key, or press the MENU button again to move to the next feature setting. ROGER BEEP (end of transmission) TONE When the PTT button is released, the radio will beep to confirm to other users that your transmission has finished. To turn the ROGER BEEP tone on, press the MENU button until the display shows a rb icon while on the right of the rb display, an oF icon appears. Select on by pressing the s\t buttons and push the PTT key, or press the MENU button to move to the next feature setting. To turn the ROGER BEEP tone off, press the MENU button until the display shows a rb icon while on the right of the rb display, an on icon appears. Select oF by pressing the s\t buttons and push the PTT key, or press the MENU button to move to the next feature setting. CALL ALERT SELECTION Your radio has 5 selectable CALL ALERTS. To select, press the MENU button until a CA icon appears and to the right of the CA icon the current CALL ALERT setting is displayed. Then press the s\t buttons to make the CALL ALERT selections - the radio will emit a corresponding tone for each selection. To confirm, press the PTT button or press the MENU button to move to the next feature setting. SILENT OPERATION Your radio has a SILENT OPERATION mode. In this mode, all beeps and tones are disabled. To turn the SILENT OPERATION mode on, press the MENU button until the display shows a bP icon while on the right of the bP display, an on icon appears. Select oF by pressing the s\t buttons and push the PTT key or MENU button. To turn the SILENT OPERATION mode off, press the MENU button until the display shows a bP icon while on the right of the bP display, an oF icon appears. Select on by pressing the s\t buttons and push the PTT key or MENU button. DCS PRIVACY CODE CHART No. CODE No. CODE No. CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 023 025 026 031 032 043 047 051 054 065 071 072 073 074 114 115 116 125 131 132 134 143 152 155 156 162 165 172 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 174 205 223 226 243 244 245 251 261 263 265 271 306 311 315 331 343 346 351 364 365 371 411 412 413 423 431 432 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83
-
445 464 465 466 503 506 516 532 546 565 606 612 624 627 631 632 654 662 664 703 712 723 731 732 734 743 754
-
Note: Privacy codes can be programmed for use on Channels 1~22 only NOAA WEATHER RADIO/SCAN Your radio has a NOAA WEATHER RADIO function, to enable the user to receive weather reports from designated NOAA stations. Your radio also has a NOAA WEATHER SCAN function to enable the user to scan all 10 channels of the NOAA WEATHER RADIO. To turn the NOAA WEATHER SCAN on, press and hold the UP/WX s button for 5 seconds while in FRS mode. The radio will go to WX Band mode and start scanning all 10 channels and stop on any active channel. When the channel becomes inactive for 10 seconds the radio will resume scanning. To stop the NOAA WEATHER (WX) SCAN and set the channel manually on the WX Band, press the MENU button during NOAA WEATHER (WX) SCAN. The radio will stop scanning and the display will show the current WX Band channel setting and the WX Band icon. While on WX Band mode press the s\t buttons to select one of the 10 NOAA WEATHER (WX) BAND channels. To confirm, press the PTT button or press the MENU button to move to the next feature setting. To turn the NOAA WEATHER RADIO off, press the PTT button. The current FRS radio setting will be displayed and the WX BAND icon will go off. NOAA WEATHER ALERT Your radio has a NOAA WEATHER ALERT function, to enable you to automatically receive weather alerts from designated NOAA stations. The NOAA WEATHER (WX) ALERT is automatically on during NOAA WEATHER SCAN mode. To turn the NOAA WEATHER (WX) ALERT on during normal NOAA WEATHER RADIO mode, press the MENU button twice while in NOAA WEATHER SCAN mode. The display shows "AL," while on the right an "oF" icon appears blinking. Select "on" by pressing the s\t buttons. LIMITED WARRANTY (United States and Canada) Subject to the exclusions set forth below, Midland Radio Corporation will repair or replace, at its option without charge, any Midland FRS transceiver which fails due to a defect in material or workmanship within Three Years following the initial consumer purchase. This warranty does not apply to water damage, battery leak, abuse or misuse of unauthorized accessories, unauthorized service or modification or altered products. Accessories have a 90 day warranty from date of purchase, including any chargers, microphones, and cables. This warranty does not include the cost of labor for removal or re-installation of the product in a vehicle or other mounting. ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED AS SET FORTH HEREIN AND TO THE DURATION OF THE LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MIDLAND BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE, GROSS NEGLIGENCE, BODILY INJURY, PROPERTY DAMAGE AND DEATH) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. For Product Purchased in the USA:
Performance of any obligation under this warranty may be obtained by returning the warranted product, prepaid freight, along with proof of purchase to:
Midland Radio Corporation Warranty Service Department 5900 Parretta Drive Kansas City, MO 64120 This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Note: The above warranty applies only to merchandise purchased in the United States of America or any of the territories or possessions thereof, or from a U.S. Military exchange. For Product Purchased in Canada:
Performance of any obligation under this warranty may be obtained by returning the warranted product, along with proof of purchase, to your place of purchase in Canada. This warranty gives you specified legal rights. Additional warranty rights may be provided by law in some areas within Canada. To confirm, press the PTT button or press MENU. The radio will return to WX BAND and the WX BAND icon will continue blinking. If the radio receives a WX ALERT signal from a designated NOAA station while on FRS Radio mode, the radio will beep for 10 seconds while an "AL" and "In" icon appear on the display, after which it will automatically go to WX BAND. If any button is pressed during beeping while on FRS Radio mode, the radio will automatically go to WX BAND. To turn the NOAA WEATHER (WX) ALERT off, press the MENU button twice while in WX Band. The display shows "AL," while on the right an "on" icon appears blinking. Select "oF" by pressing the s\t buttons. To confirm, press the PTT button or press MENU. Note : The WX Alert is automatically ON during WX SCAN mode. EXTERNAL SPEAKER/MICROPHONE JACK Your radio can be used with an optional external speaker/
microphone or headset, freeing your hands for other tasks. To use an optional speaker/microphone or headset:
l Insert the plug(s) into the SPK/MIC jacks. l Place the earbud into your ear, and adjust the
!
mic into your desired position. Note : You can charge a rechargeable NiMH battery pack thru the CHG Jack. ACCESSORIES Accessories can be purchased at midlandusa.com. AVP1
- Over the Ear Headsets AVPH2
- Closed Face Helmet Headset Kit AVPH3
- Surveillance Headsets AVPH4
- Wrap Around the Ear Headsets AVPH5
- Behind the Head Headsets TROUBLESHOOTING GUIDE PROBLEM SOLUTION No Power
- Check battery installation and/or replace batteries. Cannot Receive Messages
- Confirm the radios have the same channel settings.
- Make sure that you are within range of the other transceivers. SPECIFICATIONS Channels 36 FRS Channels +121 Privacy Codes 10 NOAA Weather (WX) Band Channels Operating Frequency UHF 462.5500 ~ 467.7125 MHz Power Source 4 AAA Alkaline or 4.8V Rechargeable NiMH battery pack FRS FREQUENCY CHART (MHz)
- Buildings and other structures may interfere with CH. No your communication. Radio is not responding to button presses
- Make sure key lock is not on (See Keypad Lock).
- Radio might need to be reset. Turn radio off then on. Display is dim
- Recharge or replace batteries. Charger not functioning - Contacts on the bottom of the radio may require cleaning.
- Ensure the outlet where the charger is plugged in is functioning properly.
- Check that the battery pack is installed in the radio 1 2 3 4 5 6 7 8 9 10 11 12 CH. Freq. 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 467.6625 CH. No 13 14 15 16 17 18 19 20 21 22 23 24 CH. Freq. 467.6875 467.7125 462.5500 462.5750 462.6000 462.6250 462.6500 462.6750 462.7000 462.7250 properly.
* Channels 8~14 are low-power FRS channels CH. No CH. Freq. 25 26 27 28 29 30 31 32 33 34 35 36 USE AND CARE 1. Use a soft damp cloth to clean the radio. 2. Do not use alcohol or cleaning solutions to clean the radio. 3. Do not immerse the radio in water. 4. Dry the radio with a dry lint-free cloth should it get wet. 5. Turn off the radio and remove the batteries during long-term storage. If you have a problem which you believe requires service, please call first and speak with a service technician at 816-241-8500. Many problems can be remedied over the phone without returning the unit for service. NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz) CH. No 1 2 3 4 5 CH. Freq. 162.550 162.400 162.475 162.425 162.450 CH. No 6 7 8 9 10 CH. Freq. 162.500 162.525 161.650 161.775 163.275
* Channel 8,9 and 10 are designated Canadian Marine Frequencies PRIVACY CODES FREQUENCY CHART (Hz) Code 1 2 3 4 5 6 7 8 Freq. 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 Code 9 10 11 12 13 14 15 16 Freq. 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 Code 17 18 19 20 21 22 23 24 Freq. 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 Code 25 26 27 28 29 30 31 32 Freq. 156.7 162.2 167.9 173.8 179.9 186.2 192.8 203.5 Code 33 34 35 36 37 38 Freq. 210.7 218.1 225.7 233.6 241.8 250.3 Note: Privacy codes can be programmed for use on Channels 1~22 only AVPH7
- Camo Headsets with Boom Mic AVP-H8
- Acoustic Throat Mic AVP6
- Chargers and Batteries IMPORTANT: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT: Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. IMPORTANT: Changes or modifications to this unit not expressly approved by MIDLAND RADIO CORP. could void your right to operate this unit. Your radio is set up to transmit a regulated signal on an assigned frequency. It is against the law to alter or adjust the settings inside the COMMUNICATOR to exceed those limitations. Any adjustment to your radio must be made by qualified technicians.
1 2 | User Manual | Users Manual | 2.02 MiB |
IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION
(Only Applicable for GMRS Radio Use in the United States) LCD DISPLAY Welcome to the world of Midland electronics Congratulations on your purchase of a high quality MIDLAND product. Your 2-way radio represents state-of-the-art high-tech engineering. Designed for GMRS (General Mobile Radio Service) operation, this compact package is big on performance. It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your two-way radio is designed for reliable and trouble-free performance for years to come. Features
- 36 GMRS/FRS Channels
- 121 Privacy Codes (38 CTCSS / 83 DCS)
- VOX
- Selectable Call Alert
- NOAA Weather Scan
- NOAA Weather Radio
- NOAA Weather Alert
- Scan Function
- Monitor Function
- Roger Beep Tone
- Silent Operation
- Key Pad Lock
- High / Low Power Settings
- Speaker / Microphone Jacks
- Battery Meter / Battery Low Indicator This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device does not cause harmful interference, and (2) this radio must accept any interference that may cause undesired operation. To maintain compliance with FCCs RF exposure guidelines, for body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with Midland Radio Corp. accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. CHARGING THE BATTERY PACK Your radio is equipped for using a rechargeable NiMH battery pack which can be recharged by inserting the AC adapter into the radio charge jack, or with optional desktop charger (as described below). Initial charge time is 24 hours. Charge time is about 12 hours thereafter. For maximum battery life, we recommend charging the battery pack when the low battery icon comes on. Remove the radios from the charger when the charge time expires. To charge using a Desktop Charger:
1. Place the rechargeable battery packs in the radios. 2. Connect the AC adapter into an AC wall outlet. 3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if charging in vehicle) into the desktop charger jack. 4. Place the units into the desktop charger slot and note that the LED indicator with RED color will light up, indicating charging function. In order to ensure that the battery pack is fully charged, it is recommended that the battery pack be charged for at least 12 hours with the radio turned OFF.
!
1. Only use our NiMH battery pack and AC adapter. 2. Do not attempt to charge alkaline batteries or any batteries or battery packs other than the one indicated in the manual. This may cause leakage and damage to the radio. 3. For long term storage of the radio, turn the radio OFF and remove the batteries from the radio. BATTERY LEVEL INDICATOR Your radio has a BATTERY LEVEL METER that shows the battery power level. The greater the number of bars visible, the stronger the battery level. When the battery level is low, the Battery Shell icon will flash in the display indicating your batteries should be replaced or recharged if using a rechargeable battery pack. MIDLAND RADIO CORPORATION 5900 Parretta Drive Kansas City, MO 64120 Call 816.241.8500 Wed love to hear from you! Let us know what you think of your new Midland product at or by visiting us at midlandusa.com Note: Features & Specifications are subject to change without notice. MIDLAND is not responsible for unintentional errors or omissions on its packaging. Rev A The radios operate on GMRS (General Mobile Radio Service) frequencies which require an FCC (Federal Communications Commission) license. You must be licensed prior to operating on channels 1 - 7 or 15 - 22, which comprise the GMRS channels of the radios. Serious penalties could result from unlicensed use of GMRS channels, in violation of FCC rules, as stipulated in the Communications Acts Sections 501 and 502 (amended). You will be issued a call sign by the FCC which should be used for station identification when operating the radio on GMRS channels. You should also cooperate by engaging in permissible transmissions only, avoiding channel interference with other GMRS users, and being prudent with the length of your transmission time. To obtain a license or ask questions about the license application, contact the FCC at 1-888-CALL FCC or go to the FCC's website:
http://www.fcc.gov and request form 605. Exposure To Radio Frequency Energy Your Midland radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:
- United States Federal Communications Commission, Code of Federal Regulations: 47 CFR part 2 sub-part J
- American National Standards Institute (ANSI)/Institute of Electrical &
Electronic Engineers (IEEE) C95. 1-1992
- Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999 Edition
- National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986
- International Commission on Non-lonizing Radiation Protection (ICNIRP) 1998 To control your exposure and ensure compliance with the general population or uncontrolled environment exposure limits, transmit no more than 50% of the time. The radio generates measurable RF energy exposure only when transmitting. Body-Worn Operation If you wear the radio on your body when transmitting always use Midland-
supplied or approved belt clip, holster, case, or body harness for this product. Use of any accessories not supplied or approved by Midland may exceed FCC/Health Canada RF exposure guidelines. If you do not use any accessories supplied or approved by Midland, ensure the radio and its antenna are at least 1 inch (2.5cm) from your body when transmitting. OPERATING YOUR RADIO POWER ON/OFF AND VOLUME Press the POWER/MENU button for at least 3 seconds to turn the radio on/off. During Power On, the radio will beep 2 times with different tones, the LCD will display all icons for 1 second and the LCD display will indicate the last channel selected. To increase/decrease the volume level, press the s\t buttons during RX or STANDBY mode. TRANSMITTING AND RECEIVING A CALL To communicate, all radios in your group must be set to the same channel and/or Privacy Code. 1. For maximum clarity, hold the radio 2 to 3 inches from your mouth. 2. Press and hold the PTT button and speak in a normal voice into the microphone. The TX icon will appear continuously on the LCD display while transmitting. 3. To receive a call, release the PTT button. The RX icon will appear on the display when your radio is receiving a transmision. ABOUT RANGE Your LXT Series radios are designed to give you maximum range under optimum conditions. Optimum Conditions are:
l Over water l Open rural areas without obstructions l Flat areas where you can see the other person To ensure you get maximum range:
l Be sure to use fresh or fully charged batteries - low batteries will cause low power conditions. l Be sure you are on a GMRS channel - FRS channels are restricted by the FCC to low power. l Be sure to set your radio to use Hi power. 1 2 3 4 5 CONTROLS 11 12 13 14 1. KEY LOCK ICON Indicates KEY LOCK mode is on. 2. VOX ICON Indicates when VOX mode is active. 3. NOAA WEATHER (WX) BAND ICON Indicates when the radio is in Weather Band mode. 4. CHANNEL NUMBER Changes from 1~36 on GMRS/FRS band (1~10 on WX band). 5. PRIVACY CODE Indicates Privacy Code selected by user (oF~38/oF~83). It can only be set in Ch 1~22. 6 7 8 9 10 6. BATTERY METER Indicates the battery level. 7. RECEIVE (RX) ICON Indicates radio is receiving a transmission. 8. TRANSMIT (TX) ICON Indicates radio is transmitting a signal. 9. TRANSMIT POWER LEVEL ICON Indicates TX Power setting (H/L). 10. PRIVACY CODE ICON Indicates Privacy Code setting (CTCSS/DCS). 15 16 17 18 19 11. PTT Button Press and hold to transmit voice communication. 12. CALL/LOCK Button Press to send a CALL ALERT signal. Press and hold to turn KEY LOCK on/off. 13. MIC Built-in microphone. 14. SPEAKER Built-in speaker. 15. ANTENNA 16. EXTERNAL SPEAKER/MIC/CHG. JACK 17. POWER / MENU Button Press and hold for at least 3 seconds to turn the radio on/off. Press momentarily to access Menu mode. 18. MONITOR/SCAN Button Press to enter SCAN mode. Press and hold to enter MONITOR mode. 19. UP/WX SCAN s and DOWN t Buttons Make adjustments in MENU mode. Press and hold the UP button for 5 seconds to activate the NOAA Weather Scan function. BATTERY INSTALLATION Your radio operates with either a NiMH battery pack or optional 4 AAA alkaline batteries. The belt clip should be removed (see below) to ease installation or removal of the batteries. To install the batteries:
1. With the back of the radio facing you, remove the belt clip (see diagram below) for easy access, then remove the Battery Cover by pressing down on the top center and sliding it down from the radio. 2. Insert 4 AAA batteries observing the polarity as shown. Installing the batteries incorrectly will prevent the unit from operating or may damage the unit. 3. Return the Battery Cover by sliding it up on the radio. Replace the belt clip, making sure it locks into place. BATTERY COMPARTMENT BATTERY COMPARTMENT COVER Press here and push down to open BELT CLIP LOCK TAB BELT CLIP LATCH INSTALLING THE BELT CLIP To install the BELT CLIP, slide the clip up into the slot on the back of the radio until the BELT CLIP LATCH clicks. To remove the BELT CLIP, press the LOCKTAB up, then gently pull the belt clip down toward the bottom of the radio. LXT560 SERIES QUICK REFERENCE CHART MENU Channel Privacy Power VOX Roger Beep Call Alert Silent Operation 1~36 H/L oF/1/2/3 On/Off 1~5 On/Off CTCSS oF~38 DCS oF~83 Press and hold UP/WX button for 5 seconds WX Scan WX Channel WX Alert 1~10 1~10 On/Off MONITOR Pressing and holding the MONITOR button for 3 seconds will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This could also be used to check any activity on your current channel before transmitting. Press and hold the MONITOR button for 3 seconds again to get out of MONITOR mode. SCAN Your radio can scan all 36 channels for activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 36 channels and stop on any active channel for 4 seconds before resuming scan. When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel. To resume scanning, quickly press the SCAN button. CALL ALERT Your radio can transmit a call alert for a fixed length of time. To send a call alert, press the CALL button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation. KEYPAD LOCK To avoid accidentally changing the radio setting, press the LOCK button for 4 seconds. The KEY LOCK icon will appear on the display. PTT and CALL will still be active. Repeat the same procedure to unlock the keypad. CHANNEL SELECTION (GMRS/FRS BAND) Press the MENU button once, and then the s\t buttons to select one of the 36 GMRS/FRS channels. To confirm the selection, press the PTT button or press the MENU button again to move to the next feature setting. SETTING PRIVACY CODES Your radio has 121 Privacy Codes available to use in channels 1~22. You may select a different Privacy Code for each channel. To select a Privacy Code for the current channel press the MENU button twice, and then the s\t buttons to select one of the 38 CTCSS Privacy Codes. Press the MENU button again and then the s\t buttons to select one of the 83 DCS Privacy Code. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode. To confirm the selection, press the PTT button or press the MENU button again to move to the next feature setting.
!
Note : If you select a CTCSS Privacy Code, any pre-selected DCS Privacy Code will be cancelled and vice-versa. Selecting a Privacy Code of "oF" will disable the Privacy feature. To communicate between two radios, all radios in your group must be set to the same channel and/or Privacy Code selections. The Privacy Code can only be set in channels 1~22. TRANSMIT (TX) POWER LEVEL SELECTION Your radio has 2 power level settings. To select the power level on channels 1~7 and 15~36, press the MENU button until a Pr icon will appear blinking on the display. Then press the s\t buttons to select TRANSMIT POWER LEVEL icon (H: Hi/L: Lo). To confirm, press the PTT button or press the MENU button again to move to the next feature setting. When the PTT button is pressed during Low Battery Level condition, the TX Power will automatically switch from Hi(H) to Lo(L) level.
!
Note : You cannot adjust the power setting on the FRS channels (8~14). They are set to Low power per FCC regulations. VOX Your radio has 3 VOX level settings: (oF/1/2/3). To set VOX, press the MENU button until the display shows VOX blinking while on the right of the CHANNEL NUMBER display, an oF icon appears. Select 1,2 or 3 by pressing the s\t buttons and push the PTT key, or press the MENU button again to move to the next feature setting. VOX will be more sensitive on the 1 setting than on the 3 setting. To turn VOX off, press the MENU button until the display shows VOX blinking while on the right of the CHANNEL NUMBER display, a 1,2 or 3 icon appears. Select oF by pressing the s\t buttons and push the PTT key, or press the MENU button again to move to the next feature setting. ROGER BEEP (end of transmission) TONE When the PTT button is released, the radio will beep to confirm to other users that your transmission has finished. To turn the ROGER BEEP tone on, press the MENU button until the display shows a rb icon while on the right of the rb display, an oF icon appears. Select on by pressing the s\t buttons and push the PTT key, or press the MENU button to move to the next feature setting. To turn the ROGER BEEP tone off, press the MENU button until the display shows a rb icon while on the right of the rb display, an on icon appears. Select oF by pressing the s\t buttons and push the PTT key, or press the MENU button to move to the next feature setting. CALL ALERT SELECTION Your radio has 5 selectable CALL ALERTS. To select, press the MENU button until a CA icon appears and to the right of the CA icon the current CALL ALERT setting is displayed. Then press the s\t buttons to make the CALL ALERT selections - the radio will emit a corresponding tone for each selection. To confirm, press the PTT button or press the MENU button to move to the next feature setting. SILENT OPERATION Your radio has a SILENT OPERATION mode. In this mode, all beeps and tones are disabled. To turn the SILENT OPERATION mode on, press the MENU button until the display shows a bP icon while on the right of the bP display, an on icon appears. Select oF by pressing the s\t buttons and push the PTT key or MENU button. To turn the SILENT OPERATION mode off, press the MENU button until the display shows a bP icon while on the right of the bP display, an oF icon appears. Select on by pressing the s\t buttons and push the PTT key or MENU button. DCS PRIVACY CODE CHART No. CODE No. CODE No. CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 023 025 026 031 032 043 047 051 054 065 071 072 073 074 114 115 116 125 131 132 134 143 152 155 156 162 165 172 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 174 205 223 226 243 244 245 251 261 263 265 271 306 311 315 331 343 346 351 364 365 371 411 412 413 423 431 432 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83
-
445 464 465 466 503 506 516 532 546 565 606 612 624 627 631 632 654 662 664 703 712 723 731 732 734 743 754
-
Note: Privacy codes can be programmed for use on Channels 1~22 only NOAA WEATHER RADIO/SCAN Your radio has a NOAA WEATHER RADIO function, to enable the user to receive weather reports from designated NOAA stations. Your radio also has a NOAA WEATHER SCAN function to enable the user to scan all 10 channels of the NOAA WEATHER RADIO. To turn the NOAA WEATHER SCAN on, press and hold the UP/WX s button for 5 seconds while in GMRS mode. The radio will go to WX Band mode and start scanning all 10 channels and stop on any active channel. When the channel becomes inactive for 10 seconds the radio will resume scanning. To stop the NOAA WEATHER (WX) SCAN and set the channel manually on the WX Band, press the MENU button during NOAA WEATHER (WX) SCAN. The radio will stop scanning and the display will show the current WX Band channel setting and the WX Band icon. While on WX Band mode press the s\t buttons to select one of the 10 NOAA WEATHER (WX) BAND channels. To confirm, press the PTT button or press the MENU button to move to the next feature setting. To turn the NOAA WEATHER RADIO off, press the PTT button. The current GMRS/FRS radio setting will be displayed and the WX BAND icon will go off. NOAA WEATHER ALERT Your radio has a NOAA WEATHER ALERT function, to enable you to automatically receive weather alerts from designated NOAA stations. The NOAA WEATHER (WX) ALERT is automatically on during NOAA WEATHER SCAN mode. To turn the NOAA WEATHER (WX) ALERT on during normal NOAA WEATHER RADIO mode, press the MENU button twice while in NOAA WEATHER SCAN mode. The display shows "AL," while on the right an "oF" icon appears blinking. Select "on" by pressing the s\t buttons. LIMITED WARRANTY (United States and Canada) Subject to the exclusions set forth below, Midland Radio Corporation will repair or replace, at its option without charge, any Midland FRS/GMRS transceiver which fails due to a defect in material or workmanship within Three Years following the initial consumer purchase. This warranty does not apply to water damage, battery leak, abuse or misuse of unauthorized accessories, unauthorized service or modification or altered products. Accessories have a 90 day warranty from date of purchase, including any chargers, microphones, and cables. This warranty does not include the cost of labor for removal or re-installation of the product in a vehicle or other mounting. ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED AS SET FORTH HEREIN AND TO THE DURATION OF THE LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MIDLAND BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE, GROSS NEGLIGENCE, BODILY INJURY, PROPERTY DAMAGE AND DEATH) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. For Product Purchased in the USA:
Performance of any obligation under this warranty may be obtained by returning the warranted product, prepaid freight, along with proof of purchase to:
Midland Radio Corporation Warranty Service Department 5900 Parretta Drive Kansas City, MO 64120 This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Note: The above warranty applies only to merchandise purchased in the United States of America or any of the territories or possessions thereof, or from a U.S. Military exchange. For Product Purchased in Canada:
Performance of any obligation under this warranty may be obtained by returning the warranted product, along with proof of purchase, to your place of purchase in Canada. This warranty gives you specified legal rights. Additional warranty rights may be provided by law in some areas within Canada. To confirm, press the PTT button or press MENU. The radio will return to WX BAND and the WX BAND icon will continue blinking. If the radio receives a WX ALERT signal from a designated NOAA station while on GMRS/FRS Radio mode, the radio will beep for 10 seconds while an "AL" and "In" icon appear on the display, after which it will automatically go to WX BAND. If any button is pressed during beeping while on GMRS/FRS Radio mode, the radio will automatically go to WX BAND. To turn the NOAA WEATHER (WX) ALERT off, press the MENU button twice while in WX Band. The display shows "AL," while on the right an "on" icon appears blinking. Select "oF" by pressing the s\t buttons. To confirm, press the PTT button or press MENU. Note : The WX Alert is automatically ON during WX SCAN mode. EXTERNAL SPEAKER/MICROPHONE JACK Your radio can be used with an optional external speaker/
microphone or headset, freeing your hands for other tasks. To use an optional speaker/microphone or headset:
l Insert the plug(s) into the SPK/MIC jacks. l Place the earbud into your ear, and adjust the
!
mic into your desired position. Note : You can charge a rechargeable NiMH battery pack thru the CHG Jack. ACCESSORIES Accessories can be purchased at midlandusa.com. AVP1
- Over the Ear Headsets AVPH2
- Closed Face Helmet Headset Kit AVPH3
- Surveillance Headsets AVPH4
- Wrap Around the Ear Headsets AVPH5
- Behind the Head Headsets TROUBLESHOOTING GUIDE PROBLEM SOLUTION No Power
- Check battery installation and/or replace batteries. Cannot Receive Messages
- Confirm the radios have the same channel settings.
- Make sure that you are within range of the other transceivers. SPECIFICATIONS Channels 36 GMRS/FRS Channels +121 Privacy Codes 10 NOAA Weather (WX) Band Channels Operating Frequency UHF 462.5500 ~ 467.7125 MHz Power Source 4 AAA Alkaline or 4.8V Rechargeable NiMH battery pack GMRS/FRS FREQUENCY CHART (MHz)
- Buildings and other structures may interfere with CH. No your communication. Radio is not responding to button presses
- Make sure key lock is not on (See Keypad Lock).
- Radio might need to be reset. Turn radio off then on. Display is dim
- Recharge or replace batteries. Charger not functioning - Contacts on the bottom of the radio may require cleaning.
- Ensure the outlet where the charger is plugged in is functioning properly.
- Check that the battery pack is installed in the radio 1 2 3 4 5 6 7 8 9 10 11 12 CH. Freq. 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 467.6625 CH. No 13 14 15 16 17 18 19 20 21 22 23 24 CH. Freq. 467.6875 467.7125 462.5500 462.5750 462.6000 462.6250 462.6500 462.6750 462.7000 462.7250 CH. No CH. Freq. 25 26 27 28 29 30 31 32 33 34 35 36 properly.
* Channels 8~14 are low-power FRS license free channels USE AND CARE 1. Use a soft damp cloth to clean the radio. 2. Do not use alcohol or cleaning solutions to clean the radio. 3. Do not immerse the radio in water. 4. Dry the radio with a dry lint-free cloth should it get wet. 5. Turn off the radio and remove the batteries during long-term storage. If you have a problem which you believe requires service, please call first and speak with a service technician at 816-241-8500. Many problems can be remedied over the phone without returning the unit for service. NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz) CH. No 1 2 3 4 5 CH. Freq. 162.550 162.400 162.475 162.425 162.450 CH. No 6 7 8 9 10 CH. Freq. 162.500 162.525 161.650 161.775 163.275
* Channel 8,9 and 10 are designated Canadian Marine Frequencies PRIVACY CODES FREQUENCY CHART (Hz) Code 1 2 3 4 5 6 7 8 Freq. 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 Code 9 10 11 12 13 14 15 16 Freq. 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 Code 17 18 19 20 21 22 23 24 Freq. 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 Code 25 26 27 28 29 30 31 32 Freq. 156.7 162.2 167.9 173.8 179.9 186.2 192.8 203.5 Code 33 34 35 36 37 38 Freq. 210.7 218.1 225.7 233.6 241.8 250.3 Note: Privacy codes can be programmed for use on Channels 1~22 only IMPORTANT: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT: Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. IMPORTANT: Changes or modifications to this unit not expressly approved by MIDLAND RADIO CORP. could void your right to operate this unit. Your radio is set up to transmit a regulated signal on an assigned frequency. It is against the law to alter or adjust the settings inside the COMMUNICATOR to exceed those limitations. Any adjustment to your radio must be made by qualified technicians. AVPH7
- Camo Headsets with Boom Mic AVP-H8
- Acoustic Throat Mic TH2
- Tactical Action Boom Mic with PTT AVP6
- Chargers and Batteries
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-10-15 | 467.5625 ~ 467.7125 | FRF - Part 95 Family Radio Face Held Transmitter | Class II Permissive Change |
2 | 2017-06-29 | 467.5625 ~ 467.7125 | FRF - Part 95 Family Radio Face Held Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2019-10-15
|
||||
1 2 |
2017-06-29
|
|||||
1 2 | Applicant's complete, legal business name |
Midland Radio Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0005867551
|
||||
1 2 | Physical Address |
5900 Parretta Drive
|
||||
1 2 |
Kansas City, MO
|
|||||
1 2 |
Kansas City, Missouri 64120-2134
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 2 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
MMA
|
||||
1 2 | Equipment Product Code |
LXT560PA
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B******** R********
|
||||
1 2 | Title |
Director of Operations
|
||||
1 2 | Telephone Number |
816 2******** Extension:
|
||||
1 2 | Fax Number |
816 2********
|
||||
1 2 |
b******@midlandradio.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Yes | |||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | FRF - Part 95 Family Radio Face Held Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | FAMILY RADIO TRANSCEIVER | ||||
1 2 | GMRS / FRS | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Listed Power is ERP. This device is authorized to operate in the FRS (Part 95B) radio service. This transmitter has been tested for SAR compliance in Push-to-Talk and body-worn operating configurations. Hand held and body-worn SAR compliance is limited to the specific antennas / belt-clips / holsters / accessories tested for this device. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported 50% duty cycle SAR levels for Head and Body-Worn Accessories are: 0.73 W/kg and 0.76 W/kg respectively. | ||||
1 2 | Listed Power is ERP. This device is authorized to operate in the following radio services: FRS (Part 95B) or GMRS (Part 95A). There must be an informational insert inside the box (product package) or the Users Manual must include information that clearly informs the consumer (buyer/owner) when the radio is transmitting on GMRS frequencies, that operation on GMRS frequencies requires an FCC license and such operation is subject to additional rules specified in 47 C.F.R. Part 95. This transmitter has been tested for SAR compliance in Push-to-Talk and body-worn operating configurations. Hand held and body-worn SAR compliance is limited to the specific antennas / belt-clips / holsters / accessories tested for this device. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported 50% duty cycle SAR levels for Head and Body-Worn Accessories are: 0.73 W/kg and 0.76 W/kg respectively. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Timco Engineering, Inc.
|
||||
1 2 |
KOSTEC Co., Ltd
|
|||||
1 2 | Name |
B****** C********
|
||||
1 2 |
L****** C********
|
|||||
1 2 | Telephone Number |
352-4********
|
||||
1 2 |
82-31********
|
|||||
1 2 | Fax Number |
352 4********
|
||||
1 2 |
82-31********
|
|||||
1 2 |
b******@timcoengr.com
|
|||||
1 2 |
c******@kostec.org
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 95B | 467.5625 | 467.7125 | 0.3 | 0.87 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
1 | 2 | 95B | 462.55 | 462.725 | 1 | 0.48 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 95A | 462.55 | 462.725 | 1 | 0.48 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
2 | 2 | 95B | 467.5625 | 467.7125 | 0.3 | 0.87 ppm | 11K0F3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC