FCC ID: 2AETI-0610 Wireless Barcode Reader

Quick Start Guide and Safety & Compliance The Device is a quick and convenient shopping companion for your home. Say it or scan it to add an item to your Cart. Set Up Your Device Download and install the latest version of the app. During setup, your device will need to connect to the internet. Please have your Wi-Fi password available. To set up your device:

1) Open the app 2) Tap the menu button and go to your Account 3) Under Your devices, tap Set up a new device. 4) Follow onscreen setup instructions Once successfully activated and connected to your WiFi network, your Device will be ready for use. Using Voice Hold down the button, say one item, then release the button. Repeat for each item. Using Barcodes Hold the Device a few inches away from the product barcode and press the button until the Device beeps. Repeat for each item. Complete Your Shopping Items that you scan or say with your Device are automatically added to your Cart. Your items will be ready for checkout next time you go to the app or website. SAFETY AND COMPLIANCE INFORMATION Use responsibly. Read all instructions and safety information before use. Maintaining Your Device: Do not use this device in rain, or near sinks or other wet or highly humid locations. Take care not to spill any food or liquid on this device. Clean the Device with a soft cloth and avoid using liquids or harsh chemicals that may damage the Device. Batteries: The battery in this device cannot be recharged or replaced. Do not open, dissemble, bend, deform, puncture or shred the battery. Do not modify, attempt to insert foreign objects into the battery or immerse or expose to water or other liquids. Do not expose the battery to fire, explosion or other hazard. Promptly dispose of used batteries in accordance with applicable laws and regulations. If dropped and you suspect damage, take steps to prevent any ingestion or direct contacts of fluids and any other materials from the battery with skin or clothes. Recycling Device: In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle the Device in accordance with your local laws and regulations. Radio Frequency Exposure: The output power of the radio technology used in the Device is below the radio frequency exposure limits set by the Federal Communications Commission of the United States

(FCC). Information on the device is on file with the FCC and can be found under the Display Grant section of http://transition.fcc.gov/oet/ea/ after searching on the FCC ID for your device which can be found on the back cover. It is advised to use the wireless equipment in such a manner that the potential for human contact during normal operation is minimized. Radio Frequency Information: This Device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this Device may not cause harmful interference, and (2) this Device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (i) reorient or relocate the receiving antenna; (ii) increase the separation between the equipment and the receiver; and (iii) consult the dealer or an experienced radio/tv technician for help. Changes or modifications that are not expressly approved by the party responsible for compliance could make the Device no longer comply with the FCC rules. Other Safety Considerations: Small parts contained in your device and its accessories may present a choking hazard to small children. EU Conformity This device is in compliance with the essential requirements and other relevant provisions of RTTE Directive 1999/5/EC. A copy of the EU Declaration of Conformity is available at: www.amazon.com/kindle_eu_compliance Applicable CE Marking CE SAR Compliance This device meets EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. Recycling Device Properly In some areas, the disposal of certain electronic device is regulated. Make sure you dispose of or recycle your device in accordance with your local laws and regulations. Product Specifications Model Number: PL46MN Electrical Rating: 3.0 VDC Connectivity : Single Band Wi-Fi (2.4GHz); 802.11b/g/n; BLE 4.1 Operating Temperature Rating: 0-35 C

0984 Model: PL46MN FCC ID: 2AETI-0610 Made in China Label located on opposite side of battery compartment

Midnight Dawn LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Date: October 5, 2016 Re: FCC ID 2AETI-0610 Request for Confidential Treatment To whom it may concern:

On behalf of Midnight Dawn LLC and its affiliates, | write to request the confidential treatment of the item described below, each of which are attached as exhibits to the equipment authorization application for FCC ID No. 2AETI-O610. This request is made pursuant to 47 C.FR. 0.457 and 47 C.FR. 0.459. Short-Term Confidentiality We request 180 days of confidential treatment (from the date of grant of the equipment authorization for FCC ID No. 2AETI-0610), for the following confidential materials contained in our application:

- User manual/guide

- Test setup photos

- Internal photos

- External photos These material contain proprietary information about our device that is not publicly available, and we only share this information with third parties who are committed to maintaining the confidentiality of such information. Disclosure of this information prior to our marketing of our device would be detrimental to our business and impair our ability to successfully launch the device. Abby Tintori 9980 South 300 West, Suite 200, Sandy, Utah, 84070 Phone: (801) 382-7343 i Long-Term Confidentiality We request indefinite confidential treatment for the following confidential materials contained in our application:

- Schematics

- Block diagram

- Operation description

- Power tune-up procedure These material contain sensitive technical and design information about our device that we would only share on a need-to-know basis, subject to confidentiality agreements, even after we begin marketing and selling the device. If this information is disclosed, our competitors would gain an unfair commercial advantage over us by learning about our product design and development processes. This in turn would significantly harm our ability to compete in a highly competitive market space. Please let me know if you have any questions or concerns. Thank you in advance for your time and support of our request. Abby Tintori Midnight Dawn LLC Phone: (801) 382-7343 MidnightDawnLLC@gmail.com Abby Tintori 9980 South 300 West, Suite 200, Sandy, Utah, 84070 Phone: (801) 382-7343

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Re: FCC Class II Permissive change for FCC ID ID 2AETI-0610 To whom it may concern:

This is to request a Class Il permissive change for FCC ID: 2AETI-0610, originally granted on 9/14/2016. Midnight Dawn LLC Date: October 5, 2016 The major change filed under this application is:

e Adding 2 source crystal for WiFi, with an identical electrical rating and pin-to-pin compatible with main source. Toy poe Abby Tintori /

Midnight Dawn LLC Phone: (801) 382-7343 MidnightDawnLLC@gmail.com 9980 South 300 West, Suite 200, Sandy, Utah, 84070 Abby Tintori Phone: (801) 382-7343

Midnight Dawn LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Date: July 14, 2016 Re: Attestation for Product with FCC ID 2AETI-0610 To whom it may concern:

Midnight Dawn LLC confirms that the product with FCC ID 2AETI-O610 meet the requirements of the KDB 748748 DO1 Labelling Part 15 &18 Guidelines vO8 section 4, because each of the following factors are satisfied:

(1) The Device is handheld;

(2) The FCC mark (including FCC ID ad model number) ("Mark") will be placed on the Device's battery compartment and Device's batteries will not be installed during marketing of the Device;

The Mark will not be located on a removable portion of the Device's battery compartment;

The Device's user documents

) 4) The Device's battery compartment does not require special tools to access;

) direct customer on where to find the Mark; and

) The Mark will meet all general labeling requirements. Please let me know if you have any questions or concerns. Thank you in advance for your time and support of our request. Abb : VY; Ye Abby Tintri Midnight Dawn LLC Phone: (801) 382-7343 MidnightDawnLLC@gm com Abby Tintori 9980 South 300 West, Suite 200, Sandy, Utah, 84070 Phone: (801) 382-7343

Midnight Dawn LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Date: July 13, 2016 Re: FCC ID 2AETI-0610 Request for Confidential Treatment To whom it may concern:

To whom it may concern:

On behalf of Midnight Dawn LLC and its affiliates, | write to request the confidential treatment of the item described below, each of which are attached as exhibits to the equipment authorization application for FCC ID No. 2AETI-0610. This request is made pursuant to 47 C.F.R. 0.457 and 47 CFR. 0.459. Short-Term Confidenti We request 180 days of confidential treatment (from the date of grant of the equipment authorization for FCC ID No. 2AETI-0610), for the following confidential materials contained in our application:

User manual/guide Test setup photos Internal photos External photos These material contain proprietary information about our device that is not publicly available, and we only share this information with third parties who are committed to maintaining the confidentiality of such information. Disclosure of this information prior to our marketing of our device would be detrimental to our business and impair our ability to successfully launch the device. Abby Tintori 9980 South 300 West, Suite 200, Sandy, Utah, 84070 Phone: (801) 382-7343 We request indefinite confidential treatment for the following confidential materials contained in our application:

- Schematics

- Block diagram

- Operation description

- Power tune-up procedure These material contain sensitive technical and design information about our device that we would only share on a need-to-know basis, subject to confidentiality agreements, even after we begin marketing and selling the device. If this information is disclosed, our competitors would gain an unfair commercial advantage over us by learning about our product design and development processes. This in turn would significantly harm our ability to compete in a highly competitive market space. Please let me know if you have any questions or concerns. Thank you in advance for your time and support of our request. Abby Tintori Midnight Dawn LLC Phone: (801) 382-7343 MidnightDawnLLC@gmail.com Abby Tintori 9980 South 300 West, Suite 200, Sandy, Utah, 84070 Phone: (801) 382-7343