FCC ID: TV7924BT5LR9 KNOT LR9 kit

EN - English -Quick Guide:

This device needs to be upgraded to RouterOS v6.47.8 or the latest stable version, to ensure compliance with local authority regulations!

It is the end users' responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be installed according to instructions. https://mt.lv/um This series Quick Guide covers models: RB924i-2nD-BT5&BG77 This is a wireless network device. You can find the product model name on the case label (ID). Please visit the user manual page on The most important technical specifications for this product can be found on the last page of this Quick Guide. Full technical specifications, brochures, and more info about products at https://mikrotik.com/products Configuration manual for software in your language with additional information can be found athttps://mt.lv/help If you need help with configuration, please seek a consultanthttps://mikrotik.com/consultants This Wireless product is featuring Bluetooth technology. First steps:

for the full up-to-date user manual. Or scan the QR code with your mobile phone. Make sure your Internet service provider is allowing hardware change and will issue an automatic IP address;

Connect your ISP cable to the first Ethernet port;

Connect the device to the power source;

Open network connections on your computer and search for MikroTik wireless network - connect to it;

The configuration has to be done through the wireless network using a web browser or mobile app. Alternatively, you can use a WinBox configuration toolhttps

://mt.lv/winbox Open Click the Check for updates button and update your RouterOS software to the latest version, must have an active Internet connection;

In the Quick Set, WISP AP menu choose your country, to apply country regulation settings;

Set the antenna gain, depending on the antenna used;

Set up your wireless network password;

Set up your router password. in your web browser to start configuration, user name: admin and there is no password by default;

https://192.168.88.1

Safety Information:

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts. Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product. This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device. This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments. We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet. Exposure to Radio Frequency Radiation:

This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an uncontrolled environment.This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public. Exposition aux rayonnements radiofrquences:

cet quipement MikroTik est conforme aux limites d'exposition aux rayonnements FCC, IC et Union europenne tablies pour un environnement non contrl. Cet appareil MikroTik doit tre install et utilis au moins 20 centimtres de votre corps, de l'utilisateur professionnel ou du grand public. Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039. Federal Communication Commission Interference Statement Model FCC ID Contains FCC ID RB924i-2nD-BT5&BG77 TV7924BT5LR9 XMR201912BG77 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance. Innovation, Science and Economic Development Canada Model IC Contains IC RB924i-2nD-BT5&BG77-CA 7442A-924BT5LR9 10224A-201912BG77 This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: 1) Lappareil ne doit pas produire de brouillage; 2) L appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe [B] est conforme la norme NMB-003 du Canada. CAN ICES-003 (B) / NMB-003 (B)

EN - English -Quick Guide:

This device needs to be upgraded to RouterOS v6.48.3 or the latest stable version, to ensure compliance with local authority regulations!

It is the end users' responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be installed according to instructions. https://mt.lv/um This series Quick Guide covers models: RB924iR-2nD-BT5&BG77&R11e-LR9 (KNOT LR9 kit). This is a wireless network device. You can find the product model name on the case label (ID). Please visit the user manual page on The most important technical specifications for this product can be found on the last page of this Quick Guide. Full technical specifications, brochures, and more info about products at https://mikrotik.com/products Configuration manual for software in your language with additional information can be found athttps://mt.lv/help If you need help with configuration, please seek a consultanthttps://mikrotik.com/consultants This Wireless product is featuring Bluetooth technology. First steps:

for the full up-to-date user manual. Or scan the QR code with your mobile phone. Make sure your Internet service provider is allowing hardware change and will issue an automatic IP address;

Connect your ISP cable to the first Ethernet port;

Connect the device to the power source;

Open network connections on your computer and search for MikroTik wireless network - connect to it;

The configuration has to be done through the wireless network using a web browser or mobile app. Alternatively, you can use a WinBox configuration toolhttps

://mt.lv/winbox Open Click the Check for updates button and update your RouterOS software to the latest version, must have an active Internet connection;

In the Quick Set, WISP AP menu choose your country, to apply country regulation settings;

Set the antenna gain, depending on the antenna used;

Set up your wireless network password;

Set up your router password. in your web browser to start configuration, user name: admin and there is no password by default;

https://192.168.88.1

Safety Information:

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts. Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product. This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device. This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments. We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet. Exposure to Radio Frequency Radiation:

This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an uncontrolled environment.This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public. Exposition aux rayonnements radiofrquences:

cet quipement MikroTik est conforme aux limites d'exposition aux rayonnements FCC, IC et Union europenne tablies pour un environnement non contrl. Cet appareil MikroTik doit tre install et utilis au moins 20 centimtres de votre corps, de l'utilisateur professionnel ou du grand public. Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039. Federal Communication Commission Interference Statement Model FCC ID Contains FCC ID RB924iR-2nD-BT5&BG77&R11e-

LR9 TV7924BT5LR9 XMR201912BG77 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance. Innovation, Science and Economic Development Canada Model IC Contains IC RB924iR-2nD-BT5&BG77&R11e-LR9 7442A-924BT5LR9 10224A-201912BG77 This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: 1) Lappareil ne doit pas produire de brouillage; 2) L appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe [B] est conforme la norme NMB-003 du Canada. CAN ICES-003 (B) / NMB-003 (B) Bluetooth Qualified Product This product has successfully completed Bluetooth Qualification Process. For more information on Bluetooth Qualified products please use the following link: https://launchstudio.bluetooth.com/Listings/Search

US, Canada LR version US non-LR version 37 mm (w) x 43 mm (h) KNOT LR9 kit Model: RB924iR-2nD-BT5&BG77&R11e-LR9 FCC ID: TV7924BT5LR9 IC: 7442A-924BT5LR9 SN : xxx Contains FCC ID: XMR201912BG77 Contains IC: 10224A-201912BG77 37 mm (w) x 43 mm (h) Model: RB924i-2nD-BT5&BG77 FCC ID: TV7924BT5LR9 IC: 7442A-924BT5LR9 SN : xxx Contains FCC ID: XMR201912BG77 Contains IC: 10224A-201912BG77 Canada non-LR version 37 mm (w) x 43 mm (h) Model: RB924i-2nD-BT5&BG77-CA FCC ID: TV7924BT5LR9 IC: 7442A-924BT5LR9 SN : xxx Contains FCC ID: XMR201912BG77 Contains IC: 10224A-201912BG77

FCC, Request for non-disclosure RF_501, Issue 8 Date: 21-Nov-2018 Page 1 of 1 Company Name: Mikrotikls SIA Address:

City:

Country:

Brivibas gatve 214i, Riga, LV-1039, Latvia To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Request for confidentiality Subject: Request for confidentiality FCC ID: TV7924BT5LR9 Reference number:

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):

Internal Photos Users Manual Test Set-up Photos External Photos Justification:

Date: 2021/12/8 Name and signature of applicant: Edmunds Zvegincevs / Engineer, R&D Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period ___________________________

Mikrotikls SIA Brivibas gatve 214i, Riga, LV-1039, Latvia Declaration of Model Names Date: December 22, 2021 To Whom It May Concern:

We, the undersigned, hereby confirm that device FCC ID: TV7924BT5LR9 have two model names that model name of RB924iR-2nD-BT5&BG77&R11e-LR9, RB924i-2nD-BT5&BG77 is identical in RF design. These model names have following difference:

Model Number RB924iR-2nD-BT5&BG77&R11e-LR9 RB924i-2nD-BT5&BG77 LoRa function HW SW With Has R11e-LR9 (LoRa) module integrated on the PCB RouterOS v7 Without R11e-LR9 (LoRa) module Without RouterOS v7 In addition to the above information, these devices are identical. Sincerely, Signature: ___________________________ FCC grantee contact person information Name: Edmunds Zvegincevs Email: certification@mikrotik.com

RF_160, Issue 04 Mikrotikls SIA Brivibas gatve 214i, Riga, LV-1039, Latvia Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

Mikrotikls SIA Brivibas gatve 214i, Riga, LV-1039, Latvia Name Representative of agent:

Agent Company name:

Address:

City:

Country Louis Hsu (1) DEKRA Testing and Certification Co., Ltd. No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan is authorized to apply for Certification of the following product(s):

Product description:

Type designation:

Trademark:

KNOT LR9 kit RB924iR-2nD-BT5&BG77&R11e-LR9, RB924i-2nD-BT5&BG77 MikroTik on our behalf. Date:

Name:

2021/12/8 Edmunds Zvegincevs (2) Function:

Engineer, R&D Signature:

. Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.