R11e-LTE6 R11e-LTE6 is a standard Mini PCIe module,supports LTE for next-generation cellular networks and provides high speed and reliable mobile broadband data connection.LTE data rate can achieve DL 300Mbps/DL 50Mbps. The rich of interfaces and RF bands allow it to be widely used in CPE, industrial routers, security monitoring, IOT and other applications. General Features CA(FDD): B1+B5,B1+B8,B1+B20,B2+B5,B2+B17,B3+B5,B3+B7, Data Features CA FDD :Category 6, DL 300Mbps UL 50Mbps B3+B8,B3+B20,B7+B8,B7+B12,B7+B20,B8+B1,B20+B1, CA TDD: Category 6, DL 224Mbps UL 10Mbps B5+B2,B12+B2,B5+B3,B7+B3,B8+B3,B20+B3,B20+B7, WCDMA CS: DL 64 kbps/UL 64 kbps B1+B1,B2+B2,B3+B3,B5+B5,B7+B7,B8+B8,B12+B12 CA(TDD): B38+B38,B39+B39,B40+B40,B41+41,B39+B41 WCDMA PS: DL 384 kbps/UL 384 kbps LTE(FDD): Band 1/2/3/5/7/8/12/20/25/26 HSPA+: DL 21.6 Mbps/UL 5.76 Mbps LTE(TDD): Band 38/39/40/41 UMTS:Band 1/2/5/8 E/GPRS/GSM:Band 2/3/5/8 DC-HSPA+: DL 42 Mbps/UL 5.76 Mbps GPRS: DL 107 kbps/UL 85.6 kbps E: DL 296 bps/UL 236.8 kbps Interfaces Mini PCIe interface USB 2.0 x1 SIM Card x1 IIC Interface x1 PCM Interface x1 LED RESET Antenna interface MIMO: 2*2 and 4*2 DL Environmental Operating Temperature: -20+70 Extreme working temperature:-40+80 Humidity: 5%95%
Power Supply:
3.8V) 3.2 V to 4.2V (typical:
Dimensions:
AT Command:
51mm * 30mm * 5.0mm 3GPP TS 27.007 and 27.005 Windows/Linux/Android 1800/1900MHz: 26dBm+3/-4dB (Power Class E2) 850/900MHz: 27dBm3dB (Power Class E2) OS:
RF Parameters Output Power LTE: 23dBm2dB (3GPP TS 36.101 R9 Class 3) UMTS: 24dBm+1/-3dB (Power Class 3) EGPRS EGPRS GSM/GPRS 1800/1900MHz: 30dBm2dB (Power Class 1) GSM/GPRS 850/900MHz: 33dBm2dB (Power Class 4) Sensitivity FDD LTE:-99 dBm(10MHZ) TDD LTE:-97 dBm(20MHZ) GSM 850/900 MHz: -109 dBm GSM 1800/1900 MHz: -110 dBm WCDMA 850/1900 MHz: -110 dBm WCDMA 900/2100 MHz: -110 dBm Certific FCC*(North CE*(Europe) IC*(Canada) Americal) EU Regulatory RED Declaration of Conformance Hereby, we(Mikrotikls SIA) declared that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of These limits are designed to provide reasonable protection against harmful interference in a residential installation. This can radiate radio frequency energy and, if not installed and used in accordance with communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television interference by one or more of the following measures:
Caution: Any changes or modifications to this device This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. not explicitly approved by manufacturer could void your authority to operate this equipment. the instructions, may cause harmful interference to radio reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the the FCC Rules. equipment generates, uses and RF Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed operated with a minimum distance of 20 centimeters between the radiator and your body. Les antennes installes doivent tre situes de facon ce que la population ne puisse y tre expose une distance de moin de 20 cm. Installer les antennes de facon ce que le personnel ne puisse approcher 20 cm ou moins de la position centrale de l antenne. CAN ICES-3(B)/NMB-3(B) Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions doit pas produire de brouillage;(2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le compromettre le fonctionnement. CAN ICES-3(B)/NMB-3(B) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas RSS(s). Operation is subject to the following two conditions:(1)This device may not cause interference.(2)This device must including interference that may cause undesired operation of the device. The host will Satisfy Class I or Class permissive change based this module FCC ID.If the identification number is not visible when the module is installed inside the host, thenthe outside of the device into which the module is installed must also display a label referring tothe enclosed module. This exterior label can use wording such as the following: ContainsTransmitter Module Contains FCC ID:TV7R11ELTE6 or Contains FCC ID:
TV7R11ELTE6 .Any similar wording thatexpresses the same meaning may be used. brouillage est susceptible den suivantes : (1)Lappareil ne accept any interference, and licence-exempt