Quick Install Guide Mikrotik Wireless Mini PCI Adapter RouterBOARD R52 Version 1.1 D R A O B r e t u o R Introduction This mini PCI adapter, RouterBOARD R52 contains a dual-mode single chip MAC/BB/Radio for IEEE 802.11a, 11g and 11b Wireless LAN. It can support high-speed data transmission of up to 54 Mbps in the 2.4GHz and 5GHz frequency bands based on 802.11b/g and 802.11a respectively. Based on the latest industry standard Wi-Fi Certified IEEE 802.11a/g specification, the RouterBOARD R52 offers maximum channel speeds of up to 54 Mbps. It supports key security features like Wi-Fi Protected Access (WPA), WPA2, WEP and 802.1x. You can find this adapter that is seated inside the wireless products such as the notebook computers or any other devices containing Mini PCI socket. R52 can be removed from or inserted on the PCBA of the RouterBOARD products. Package Content RouterBOARD R52 retail package contains the following items:
1. 2. 1 x RouterBOARD R52 Wireless Mini PCI adapter Application of Mini PCI Align the R52 adapter to the Mini PCI socket. Adjust and push down the R52 adapter gently until the metal-
locking levers aside from the Mini PCI socket is fastened.
!! R52 adapter can only fit in one direction due to the keyed notch. Wrong orientation will cause improper installation and may damage the Mini PCI socket !!
3. Connect antenna/s on R52 adapter. DECLARATION OF CONFORMITY: MIKROTIKLS SIA declares that the product:
Product Name: Mikrotik RouterBoard R52 Wireless Mini PCI Adapter Model No.: R52 conforms to the following Product Standards:
Radiated Emission Standards: ETSI EN 300 328-2: July 2000;
FCC: 47 CFR Part 15, Subpart B, ANSI C63.4-1992; 47 CFR Part 15, Subpart C (Section 15.247), ANSI C63.4-1992. Conducted Emission Standards: ETS 300 826: Nov. 1997. Immunity Standards: IEC 801-2; IEC 801-3; IEC 801-4 Low Voltage Directive: EN 60 950:1992+A1: 1993+A2:
1993+A3; 1995+A4; 1996+A11: 1997 Therefore, this product is in conformity with the following regional standards: FCC Class B following the provisions of FCC Part 15 directive; CE Mark following the provisions of the EC directive. Manufacturers Name: Mikrotik, SIA Address: 46 Pernavas street , Riga, LV-1009, Latvia Disclaimer: Mikrotikls, SIA provides this guide without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. Mikrotikls, SIA may make improvements and/or changes to the product and/or specifications of the product described in this guide, without prior notice. Mikrotikls, SIA will not be liable for any technical inaccuracies or typographical errors found in this guide. Changes are periodically made to the information contained herein and will be incorporated into later versions of the guide. The information contained is subject to change without prior notice. Trademark Information: Mikrotik and RouterBOARD are registered trademarks of Mikrotikls, SIA. All other brand and product names are trademarks or registered trademarks of their respective owners. Notice: Copyrights 2004 by MIKROTIKLS SIA. All rights reserved. Reproduction, adaptation, or translation without prior permission of MIKROTIKLS SIA is prohibited, except as allowed under the copyright laws. Manual Number: M-R52-1.1A September 2007
(4) FCC NOTICE (FCC ID: TV7-R52) This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:
(1)
(2)
(3) Reorient or relocate the receiving antenna. Increase the separation between the affected equipment and receiver. Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to. Consult the dealer or an experienced radio / TV technician for help. Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
(2) This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Products that contain a radio transmitter are labeled with FCC ID and may also carry the FCC logo. Caution: Exposure to Radio Frequency Radiation. To comply with the FCC RF exposure compliance requirements, the following antenna installation and device operating configurations must be satisfied:
For configurations using an approved external antenna, the separation distance between the antenna and any persons body
(including hands, wrists, feet and ankles) must be at least 65cm
(25.6 inches). Caution: Professional Installation Attestation
(2)
(1) MIKROTIKLS SIA addresses the following items to ensure that the above referenced equipment is professionally installed:
The TV7-R52 will only be sold by MIKROTIKLS SIA or one of its authorized dealers. MIKROTIKLS SIA and its authorized dealers will be under strict marketing control and will only market and sell the TV7-R52 to professionals. Professional installation is required for the TV7-R52 and will be performed only by someone knowledgeable of its use. MIKROTIKLS SIA will ensure that the TV7-R52 is only marketed and sold to professionals. The TV7-R52 is not sold to the general public and is sold only for industrial or commercial use by professional installers. List of approved antennas and power settings used for Class 2 permissive change. Installer shall be responsible for ensuring that the proper antenna is employed so that the limits in FCC Part 15 are not exceeded.
(3) 5.725-5.825 Ghz Antenna Type Omni Panel Dish Grid Dish Sector Sector 2.4Ghz (802.11b) Antenna Type Omni (vertical) Omni (horizontal) Sector Sector Grid (die cast) Panel Model number Gain (dBi) Power settings OD58-12 PA58-24 DA5W-32-DP GD5W-28P SA58-90-17-WB SA58-90-17-WB 12 24 32 28 17 17 18 18 18 18 18 18 Model number Gain (dBi) Power settings OD24-12 ODH24-13 SA24-90-17 SA24-90-17 DC24HDPF1P PA24-19 12 13 17 17 24 19 19 19 19 19 19 19 EIRP 30 42 50 46 35 35 EIRP 31 32 36 36 43 38 Limit 36 53 53 53 47 36 Limit 36 36 43 36 48 44 Operational Mode PTMP PTP PTP PTP PTP PTMP Operational Mode PTMP PTMP PTP PTMP PTP PTP