cAP ac Connecting The cAP ac is a ceiling mountable wireless access point. It is already configured, you can simply plug in your ISP cable and start using wireless Internet. We recommend you to set up a password to secure your device. Remove metal ring see Removing mounting ring;
Connect POE to the Ethernet port 1, please see Powering section for instructions on how to connect POE. Set your computer IP configuration to automatic (DHCP). The device wireless access point mode is enabled by default. The device will boot up and Wireless network will be available for connecting. Open network connections on your PC, mobile phone or other device and search for MikroTik wireless network and connect to it. Once connected to the wireless network, open http://192.168.88.1 in your web browser to start configuration, user name: admin, since there is no password by default, you will be logged in automatically. We recommend clicking the Check for updates button and updating your RouterOS software to the latest version to ensure the best performance and stability. Choose your country, to apply country regulation settings and set up your password on the screen that loads. Removing mounting ring The Mounting ring comes installed on the device, in order to access Ethernet ports please remove it by turning it counterclockwise and the ring will be released. Powering The device accepts power from the Ethernet port, so you must either use the included passive PoE injector or make sure your switch supports passive or 802.3af/at PoE output. Ethernet port accepts 12-57 V DC (802.3af/at or Passive PoE). The power consumption under maximum load can reach 13 W. Connecting to a POE Adapter:
1. Connect the Ethernet cable from the device to the POE port of the POE adapter. 2. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data and power flow. 3. Connect the power cord to the adapter, and then plug the power cord into a power outlet. See mikrotik.com/products for the latest version of this document. Document #50187 Modified on: 05.NOV.2019 Mounting It is possible to attach the device to a wall or ceiling, using the provided mounting bracket on the back of the unit:
1. Attach the mounting bracket to the wall or ceiling with provided three screws;
2. Use 5 mm drill bid if necessary with provided dowels;
3. Connect needed cables to the device;
4. If needed second mounting bracket can be used for additional support when working on thin ceilings or walls, provided screw length is 20 mm;
5. Attach the second mount to the other side of the ceiling and secure with screws through the first mount;
6. Attach the device to the mounting bracket and turn clockwise until the device secures in place;
We recommend using Cat5/6 cable for our devices. The IP rating scale for this device is IPX0. Mounting and configuration of this device should be done by a qualified person. Warning! This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body. Operation of this equipment in the residential environment could cause radio interference. Configuration By default, the device is configured as a wireless access point, with the first ethernet port (Eth1) configured as a DHCP client, and the second interface bridged together with the wireless interface. A DHCP server is configured on the bridge interface. Once logged in, we recommend clicking the Check for updates button in the QuickSet menu, as updating your RouterOS software to the latest version ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to conform with local regulations. RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: http://mt.lv/help. In case IP connection is not available, the Winbox tool (http://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side
(all access is blocked from the Internet port by default). For recovery purposes, it is possible to boot the device from the network, see a section Reset button. See mikrotik.com/products for the latest version of this document. Document #50187 Modified on: 05.NOV.2019 Expansion slots and ports Two 10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for connecting to other network devices. The Eth2 port is capable of powering another RouterBOARD device with passive PoE (up to 57 V). The maximum output current is 500mA when using less than 30V to power this device and 400mA when using more than 30V. Integrated Wireless 2.4 GHz 802.11b/g/n, supports AP/CPE/P2P/repeater modes. Integrated Wireless 5 GHz 802.11a/n/ac. Buttons and jumpers Reset button The reset button has three functions:
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds). Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10 seconds). Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15 seconds). Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery. There are two mode buttons on this unit, but they both are performing the same action. The action of the mode buttons can be configured from RouterOS software to execute any user-supplied RouterOS script. You can also disable this button. By default, the buttons will enable dark mode, which disables beeps and LED lights. The mode button can be configured in the RouterOS menu /system routerboard mode-button. Mode button LED indicators There are seven LED lights on the unit, which can be controlled in RouterOS software, or disabled altogether. User user-configurable led for any desired script. 5G 5GHz interface activity. 2G 2.4 GHz interface activity. E2 Ethernet 2 connected. E1 Ethernet 1 connected. PoE LED indicates that the ETH2 port is currently powering another device with PoE. The power LED indicates that the unit is receiving power in the ETH1 port. Accessories Package includes the following accessories that come with the device:
K-46 mounting set. DC EU/US Switching Power Supply 24 V, 1.2 A, 28.8 W, Level VI, cable:1.5 m. POE Injector with shielded ethernet cable/connector (RBPOE). cAP mount ceiling attachment. Case cover. See mikrotik.com/products for the latest version of this document. Document #50187 Modified on: 05.NOV.2019 Specifications For more information about this product, specification and pictures please visit our web page:
https://mikrotik.com/product/cap_ac Operating system support The device supports RouterOS software version 6. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested. MikroTik mobile app Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point. Install and open application. 1. Scan QR code and choose your preferred OS. 2. 3. By default, the IP address and user name will be already entered. 4. Click Connect to establish a connection to your device through a wireless network. 5. Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps. 6. An advanced menu is available to fully configure all necessary settings. See mikrotik.com/products for the latest version of this document. Document #50187 Modified on: 05.NOV.2019 Federal Communication Commission Interference Statement FCC ID:TV7CPGI5ACD2ND This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. IMPORTANT: Exposure to Radio Frequency Radiation. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body. See mikrotik.com/products for the latest version of this document. Document #50187 Modified on: 05.NOV.2019 Innovation, Science and Economic Development Canada IC:7442A-CPGI5ACD2ND This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference;
2. This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est. IMPORTANT: Exposure to Radio Frequency Radiation. This equipment complies with the IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body. Cet equipement est conforme aux limites d'exposition au rayonnement IC definies pour un environnement non controle. Cet equipement doit etre installe et utilise a une distance minimale de 20 cm entre le radiateur et toute partie de votre corps. CAN ICES-3 (B)/NMB-3(B)FCC Contains IC 7442A-R11E2HPND. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande de 5150 5250 MHz sont rservs uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. See mikrotik.com/products for the latest version of this document. Document #50187 Modified on: 05.NOV.2019 CE Declaration of Conformity Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039. BG Mikrotkls SIA , RouterBOARD 2014/53/.
: https://mikrotik.com/products CS Tmto Mikrotkls SIA prohlauje, e typ rdiovho zazen RouterBOARD je v souladu se smrnic 2014/53/EU. pln znn EU prohlen o shod je k dispozici na tto internetov adrese: https://mikrotik.com/products DA Hermed erklrer Mikrotkls SIA , at radioudstyrstypen RouterBOARD er i overensstemmelse med direktiv 2014/53/EU. EU-
overensstemmelseserklringens fulde tekst kan findes p flgende internetadresse: https://mikrotik.com/products DE Hiermit erklrt Mikrotkls SIA , dass der Funkanlagentyp RouterBOARD der Richtlinie 2014/53/EU entspricht. Der vollstndige Text der EU-
Konformittserklrung ist unter der folgenden Internetadresse verfgbar: https://mikrotik.com/products EL / Mikrotkls SIA , RouterBOARD 2014/53/.
: https://mikrotik.com/products EN Hereby, Mikrotkls SIA declares that the radio equipment type RouterBOARD is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products ES Por la presente, Mikrotkls SIA declara que el tipo de equipo radioelctrico RouterBOARD es conforme con la Directiva 2014/53/UE. El texto completo de la declaracin UE de conformidad est disponible en la direccin Internet siguiente: https://mikrotik.com/products ET Kesolevaga deklareerib Mikrotkls SIA , et kesolev raadioseadme tp RouterBOARD vastab direktiivi 2014/53/EL nuetele. ELi vastavusdeklaratsiooni tielik tekst on kttesaadav jrgmisel internetiaadressil: https://mikrotik.com/products FI Mikrotkls SIA vakuuttaa, ett radiolaitetyyppi RouterBOARD on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen tysimittainen teksti on saatavilla seuraavassa internetosoitteessa: https://mikrotik.com/products FR Le soussign, Mikrotkls SIA , dclare que l'quipement radiolectrique du type RouterBOARD est conforme la directive 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible l'adresse internet suivante: https://mikrotik.com/products HR Mikrotkls SIA ovime izjavljuje da je radijska oprema tipa RouterBOARD u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: https://mikrotik.com/products HU Mikrotkls SIA igazolja, hogy a RouterBOARD tpus rdiberendezs megfelel a 2014/53/EU irnyelvnek. Az EU-megfelelsgi nyilatkozat teljes szvege elrhet a kvetkez internetes cmen: https://mikrotik.com/products IT Il fabbricante, Mikrotkls SIA , dichiara che il tipo di apparecchiatura radio RouterBOARD conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo Internet: https://mikrotik.com/products IS Hr me lsir Mikrotkls SIA v yfir a RouterBOARD er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 2014/53/EU. Fullur texti ESB samrmisyfirlsingar er a finna eftirfarandi veffangi: https://mikrotik.com/products LT A, Mikrotkls SIA , patvirtinu, kad radijo rengini tipas RouterBOARD atitinka Direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas LV Ar o Mikrotkls SIA deklar, ka radioiekrta RouterBOARD atbilst Direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams prieinamas iuo interneto adresu: https://mikrotik.com/products d interneta vietn: https://mikrotik.com/products MT B'dan, Mikrotkls SIA , niddikjara li dan it-tip ta' tagmir tar-radju RouterBOARD huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-
dikjarazzjoni ta' konformit tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ej: https://mikrotik.com/products NL Hierbij verklaar ik, Mikrotkls SIA , dat het type radioapparatuur RouterBOARD conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: https://mikrotik.com/products NO Mikrotkls SIA erklrer herved at utstyret RouterBOARD er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 2014/53/EU. Den fulle teksten til EU-samsvarserklringen er tilgjengelig p flgende internettadresse: https://mikrotik.com/products PL Mikrotkls SIA niniejszym owiadcza, e typ urzdzenia radiowego RouterBOARD jest zgodny z dyrektyw 2014/53/UE. Peny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: https://mikrotik.com/products PT O(a) abaixo assinado(a) Mikrotkls SIA declara que o presente tipo de equipamento de rdio RouterBOARD est em conformidade com a Diretiva 2014/53/UE. O texto integral da declarao de conformidade est disponvel no seguinte endereo de Internet:
https://mikrotik.com/products RO Prin prezenta, Mikrotkls SIA declar c tipul de echipamente radio RouterBOARD este n conformitate cu Directiva 2014/53/UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: https://mikrotik.com/products SK Mikrotkls SIA tmto vyhlasuje, e rdiov zariadenie typu RouterBOARD je v slade so smernicou 2014/53/E. pln E vyhlsenie o zhode je k dispozcii na tejto internetovej adrese: https://mikrotik.com/products SL Mikrotkls SIA potrjuje, da je tip radijske opreme RouterBOARD skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: https://mikrotik.com/products SV Hrmed frskrar Mikrotkls SIA att denna typ av radioutrustning RouterBOARD verensstmmer med direktiv 2014/53/EU. Den fullstndiga texten till EU-frskran om verensstmmelse finns p fljande webbadress: https://mikrotik.com/products MPE statement This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body, unless specifically stated otherwise in page 1 of this document. In RouterOS you must specify your country, to make sure local wireless regulations are observed. Frequency bands terms of use Frequency range (for applicable models) Channels used Maximum Output Power (EIRP) Restriction 2412-2472 MHz 5150-5250 MHz 5250-5350 MHz 5470-5725 MHz 1 - 13 26 - 48 52 - 64 100 - 140 20 dBm 23 dBm 20 dBm 27 dBm Without any restriction to use in all EU Member States Restricted to indoor use only*
Restricted to indoor use only*
Without any restriction to use in all EU Member States
* It is the customers responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed!
Note. Information contained here is subject to change. Please visit the product page on www.mikrotik.com for the most up to date version of this document. See mikrotik.com/products for the latest version of this document. Document #50187 Modified on: 05.NOV.2019 BG. : , . 192.168.88.1 ,
. http://mt.lv/help-bg CS. Nvod k pouit: Pipojte napjec adaptr k zapnut pstroje. Otevete 192.168.88.1 ve webovm prohlei pro konfiguraci produktu. Vce informac najdete v http://mt.lv/help-cs DA. Instruktionsbog: Tilslut strmadapteren for at tnde for enheden. bn 192.168.88.1 i en webbrowser til at konfigurere produktet. Mere information i http://mt.lv/help-da DE. Bedienungsanleitung: Verbinden Sie das Netzteil, um das Gert einzuschalten. ffnen Sie 192.168.88.1 in einem Web-Browser, um das Produkt zu konfigurieren. Weitere Informationen im http://mt.lv/help-de EL. : . 192.168.88.1 Web . http://mt.lv/help-el EN. Instruction manual: Connect the power adapter to turn on the device. Open 192.168.88.1 in your web browser, to configure it. More information on http://mt.lv/help ES. Manual de instrucciones: Conecte el adaptador de alimentacin para encender la unidad. Abra 192.168.88.1 en un navegador web para configurar el producto. Ms informacin en http://mt.lv/help-es ET. Kasutusjuhend: hendage toiteadapter seadme sissellitamiseks. Avatud 192.168.88.1 in veebilehitseja seadistada toodet. Rohkem teavet http://mt.lv/help-et FI. Kyttohje: Kytke virtalhde plle laitteen. Avaa 192.168.88.1 in selaimen mritt tuotteen. Lis tietoa http://mt.lv/help-fi FR. Mode d'emploi: Connectez l'adaptateur d'alimentation pour allumer l'appareil. Ouvrez 192.168.88.1 dans un navigateur Web pour configurer le produit. Plus d'informations dans http://mt.lv/help-fr HR. Uputa za uporabu: Prikljuite napajanje i ukljuite ureaj. Za konfiguraciju ureaja u pregledniku otvorite 192.168.88.1. Vie informacija je na http://mt.lv/help-hr HU. Hasznlati utasts: Csatlakoztassa a hlzati adaptert a kszlk bekapcsolshoz. Megnyitsa 192.168.88.1 egy webbngszben belltani a termket. Tbb informci http://mt.lv/help-hu IT. Manuale di istruzioni: Collegare l'adattatore di alimentazione per accendere l'unit. Aprire 192.168.88.1 in un browser Web per configurare il prodotto. Maggiori informazioni in http://mt.lv/help-it IS. Notkunarleibeiningar: Tengdu straumbreytinn til a kveikja tkinu. Opnau 192.168.88.1 vafra til a stilla a. Nnari upplsingar http://mt.lv/help-is NO. Instruksjonsmanual: Koble strmadapteren for sl p enheten. pne 192.168.88.1 i nettleseren din for konfigurere den. Mer informasjon p http://mt.lv/help-no LT. Naudojimosi instrukcija: Prijunkite maitinimo adapter junkite rengin. interneto narykl 192.168.88.1 Atidarykite galite konfigruoti gamin. Daugiau informacijos rasite http://mt.lv/help-lt LV. Lietoanas instrukcija: Pievienojiet Strvas adapteri, lai ieslgtu ierci. Atvrt 192.168.88.1 ar interneta prlku, lai konfigurtu produktu. Plaka informcija http://mt.lv/help-lv MT. Manwal tal-istruzzjoni: Qabbad l-adapter tal-qawwa biex iddawwar it-tagmir. Ifta 192.168.88.1 fil-web browser tiegek, biex jii kkonfigurat. Aktar informazzjoni fuq http://mt.lv/help-mt NL. Handleiding: Sluit voedingsadapter aan op het apparaat in te schakelen. Open 192.168.88.1 in een webbrowser om het product te configureren. Meer informatie in http://mt.lv/help-nl PL. Instrukcja obsugi: Podcz adapter zasilania, aby wczy urzdzenie. Otwrz 192.168.88.1 w przegldarce internetowej, aby skonfigurowa urzdzenie. Wicej informacji w http://mt.lv/help-pl PT. Manual de instrues: Conecte o adaptador de alimentao para ligar o aparelho. Abra 192.168.88.1 em um navegador da web para configurar o produto. Mais informaes em http://mt.lv/help-pt RO. Instruciuni de utilizare: Conectai adaptorul de alimentare pentru a porni aparatul. Deschide 192.168.88.1 ntr-un browser web pentru a configura produsul. Mai multe informaii n http://mt.lv/help-ro SK. Navodila: Prikljuite napajalnik za vklop naprave. Odprite 192.168.88.1 v spletnem brskalniku nastaviti izdelek. Ve informacij v http://mt.lv/help-sk SL. Nvod na pouitie: Pripojte napjac adaptr k zapnutiu prstroja. Otvorte 192.168.88.1 vo webovom prehliadai pre konfigurciu produktu. Viac informci njdete v http://mt.lv/help-sl SV. Instruktionsmanual: Anslut ntadaptern fr att sl p enheten. ppna 192.168.88.1 i en webblsare fr att konfigurera produkten. Mer information p http://mt.lv/help-sv NO. Bruksanvisningen: Koble strmadapteren for sl p enheten. pne 192.168.88.1 i en nettleser for konfigurere produktet. Mer informasjon p http://mt.lv/help-no RU. : . 192.168.88.1 -
. http://mt.lv/help-ru CN. Web 192.168.88.1 http://mt.lv/help-zh See mikrotik.com/products for the latest version of this document. Document #50187 Modified on: 05.NOV.2019