EN - English -Quick Guide:
This device needs to be upgraded to RouterOS v6.48.4 or the latest version to ensure compliance with local authority regulations!
It is the end users' responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed https://mt.lv/um for the full up-to-date user manual. Or scan the QR code with your mobile phone. This is Wireless Network Device. You can find the product model name on the case label (ID). Please visit the user manual page on The most important technical specifications for this product can be found on the last page of this Quick Guide. Technical specifications, brochures, and more info about products at https://mikrotik.com/products Configuration manual for software in your language with additional information can be found athttps://mt.lv/help MikroTik devices are for professional use. If you do not have qualifications please seek a consultanthttps://mikrotik.com/consultants Depending on the antenna used, you must set its gain. This is to ensure that EIRP meets the limit set by the local authorities. This is done in the WebFig Quickset menu. This Device accepts input of a 24V DC power adapter, which is provided in the original packaging of this device. This Device can be powered using a PoE injector
(Provided in the packaging). First steps:
https://mt.lv/winbox
Connect the device to the included PoE injector with Ethernet cable;
Connect the PoE injector into the PC;
Connect the power adapter to the PoE injector;
Download WinBox configuration tool Open WinBox and connect to the device;
Default IP: 192.168.88.1, user name:
Download the latest RouterOS software from Choose MIPSBE packages, and save them to your PC;
Open WinBox and upload downloaded packages, drag and drop into any windows;
Restart the device;
Connect again and in the Secure your device and set a strong password. https://mikrotik.com/download
, no password, or use admin
QuickSet menu set your Country, to apply country regulation settings;
Neighbors tab and connect with MAC address;
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts. Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product. This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device. This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the correc We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet. t hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system
. Exposure to Radio Frequency Radiation:
This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public. Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039. Federal Communication Commission Interference Statement FCC ID TV7GRV-A52HPC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance. Antenna Installation WARNING: It is the installer's responsibility to ensure that when using the authorized antennas in the USA (or where FCC rules apply); only those antennas certified with the product are to be used. The installer should configure the output power level of antennas, according to country regulations and per antenna type. Professional installation is required for equipment with connectors to ensure compliance with health and safety issues. LIST OF APPROVED 2.4 GHz ANTENNAS:
15 dBi Omni Directional (Model: WLO-2450-15) 13 dBi Omni Directional HP (Model: ODH 24-13) 20 dBi Panel (Model: WLP-2450-20) 17 dBi Sector (Model: SA 24-90-17-WB) 24 dBi Dish (Model: DC 24-HD-PFIP) LIST OF APPROVED 5 GHz ANTENNAS:
8.5 dBi Omni Directional (Model: MT-482016/N/A) 24 dBi Panel Antenna (Model: PA58-24-ANT) 32 dBi Dish Antenna (Model: HDDA5W-32-DP2) The same type of antenna and lower antenna gain than those listed above may also be used in accordance with certification. Innovation, Science and Economic Development Canada IC 7442A-GRVA52HPC This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: 1) Lappareil ne doit pas produire de brouillage; 2) L appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe [B] est conforme la norme NMB-003 du Canada. CAN ICES-003 (B) / NMB-003 (B) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Antenna Installation WARNING: It is the installer's responsibility to ensure that when using the authorized antennas in Canada (or where IC rules apply); only those antennas certified with the product are to be used. The installer should configure the output power level of antennas, according to country regulations and per antenna type. Professional installation is required for equipment with connectors to ensure compliance with health and safety issues. LIST OF APPROVED 2.4 GHz ANTENNAS:
15 dBi Omni Directional (Model: WLO-2450-15) 13 dBi Omni Directional HP (Model: ODH 24-13) 20 dBi Panel (Model: WLP-2450-20) 17 dBi Sector (Model: SA 24-90-17-WB) 24 dBi Dish (Model: DC 24-HD-PFIP) LIST OF APPROVED 5 GHz ANTENNAS:
8.5 dBi Omni Directional (Model: MT-482016/N/A) 24 dBi Panel Antenna (Model: PA58-24-ANT) 32 dBi Dish Antenna (Model: HDDA5W-32-DP2) The same type of antenna and lower antenna gain than those listed above may also be used in accordance with certification.
(EN) Technical Specifications / (DE) Technische Spezifikationen / (FR) Spcifications techniques
/(IT) Specifiche tecniche / (ES) Especificaciones tcnicas / (RU) :
(EN) Product Power Input Options
(DE) Produkt Stromquellen Optionen
(FR) Options d'entre d'alimentation du produit
(IT) Opzioni di ingresso alimentazione del prodotto
(ES) Opciones de entrada de energa del producto
(RU)
(EN) DC Adapter Output Specification, (V/A)
(DE) Ausgangsspezifikationen des Gleichstromadapters, (V
/A)
(FR) Spcifications de sortie de l'adaptateur de courant continu, (V/A)
(IT) Specifiche di uscita dell'adattatore di corrente continua,
(V/A)
(ES) Especificaciones de salida del adaptador de corriente continua, (V/A)
(RU)
(EN) IP class of the enclosure
(DE) IP-Klasse des Gehuses
(FR) Classe IP du botier
(IT) Classe IP della custodia
(ES) Clase de IP del recinto
(RU) IP
(EN) Operating Temperature
(DE)Betriebstemperatur
(FR) temprature de fonctionnement
(IT) temperatura di esercizio
(ES) Temperatura de funcionamiento
(RU) PoE In Ethernet Port 24 V / 0.38 IP54
-40
..+70C