FCC ID: IR5DH8 HANDHELD COMPUTER

by: MilDef Crete Inc. latest update: 2022-09-12 model: DH8

Nine grants have been issued under this FCC ID from 05/27/2022 to 09/12/2022 (this is one of nine releases in 2022 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked instructions, troubleshooting guides, warrantee terms, drivers, & password defaults.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 5 6 7 8 9 Intel WiFi Adapter Information Guide Users Manual pdf 2.60 MiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 Users Manual Users Manual pdf 1.76 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Internal photos Internal Photos pdf 5.40 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 AX210NGW- Expho 0520 External Photos pdf 442.39 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 External photos External Photos pdf 1.79 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 AX210NGW- LabelLoc 0520 ID Label/Location Info pdf 246.35 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 AX210NGW Label ID Label/Location Info pdf 61.41 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 ID Label/Location Info ID Label/Location Info pdf 104.86 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Antenna Test Report Test Report pdf 656.62 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Authorization letter Cover Letter(s) pdf 97.61 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Block Diagram Block Diagram pdf September 01 2022 confidential
1 2 3 4 5 6 7 8 9 Class II Permissive Change letter Cover Letter(s) pdf 120.72 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Confidentiality Cover Letter(s) pdf 99.35 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Schematics Schematics pdf September 01 2022 confidential
1 2 3 4 5 6 7 8 9 Test Report DSS Test Report pdf 691.33 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR RF Exposure Info pdf 1.51 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix A RF Exposure Info pdf 389.09 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 1 RF Exposure Info pdf 4.77 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 2 RF Exposure Info pdf 4.35 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 3 RF Exposure Info pdf 4.65 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 4 RF Exposure Info pdf 4.96 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 5 RF Exposure Info pdf 4.88 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 6 RF Exposure Info pdf 4.98 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 7 RF Exposure Info pdf 4.56 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 8 RF Exposure Info pdf 3.43 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix E RF Exposure Info pdf 383.83 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test setup photos RF Test Setup Photos pdf 1.19 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test setup photos SAR Test Setup Photos pdf 189.95 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report NII Test Report pdf 1.13 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report JBP Test Report pdf 2.03 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test setup photos JBP Test Setup Photos pdf 589.54 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report BLE Test Report pdf 686.23 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report WLAN Test Report pdf 1.57 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 AX210NGW- Confidentiality Request 20220524 Cover Letter(s) pdf 128.00 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 AX210NGW- Declaration letter for electrically identical Cover Letter(s) pdf 303.07 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 AX210NGW- Declaration of authorization Cover Letter(s) pdf 145.16 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 AX210NGW- Software Security Description FCC SDR Software/Security Inf pdf May 25 2022 confidential
1 2 3 4 5 6 7 8 9 FCC Auth Ltr Change of ID AX210NGW MilDef Crete Cover Letter(s) pdf 88.99 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 Intel WiFi Adapter Information Guide Users Manual pdf 2.60 MiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 Users Manual Users Manual pdf 1.76 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Internal photos Internal Photos pdf 5.40 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 AX210NGW- Expho 0520 External Photos pdf 442.39 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 External photos External Photos pdf 1.79 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 AX210NGW- LabelLoc 0520 ID Label/Location Info pdf 246.35 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 AX210NGW Label ID Label/Location Info pdf 61.41 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 ID Label/Location Info ID Label/Location Info pdf 104.86 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Antenna Test Report Test Report pdf 656.62 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Authorization letter Cover Letter(s) pdf 97.61 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Class II Permissive Change letter Cover Letter(s) pdf 120.72 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Confidentiality Cover Letter(s) pdf 99.35 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report DSS Test Report pdf 691.33 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR RF Exposure Info pdf 1.51 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix A RF Exposure Info pdf 389.09 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 1 RF Exposure Info pdf 4.77 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 2 RF Exposure Info pdf 4.35 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 3 RF Exposure Info pdf 4.65 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 4 RF Exposure Info pdf 4.96 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 5 RF Exposure Info pdf 4.88 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 6 RF Exposure Info pdf 4.98 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 7 RF Exposure Info pdf 4.56 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C 8 RF Exposure Info pdf 3.43 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix E RF Exposure Info pdf 383.83 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test setup photos RF Test Setup Photos pdf 1.19 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test setup photos SAR Test Setup Photos pdf 189.95 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report NII Test Report pdf 1.13 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report JBP Test Report pdf 2.03 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test setup photos JBP Test Setup Photos pdf 589.54 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report BLE Test Report pdf 686.23 KiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 Test Report WLAN Test Report pdf 1.57 MiB September 01 2022 / September 12 2022
1 2 3 4 5 6 7 8 9 AX210NGW- Confidentiality Request 20220524 Cover Letter(s) pdf 128.00 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 AX210NGW- Declaration letter for electrically identical Cover Letter(s) pdf 303.07 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 AX210NGW- Declaration of authorization Cover Letter(s) pdf 145.16 KiB May 25 2022 / May 27 2022
1 2 3 4 5 6 7 8 9 FCC Auth Ltr Change of ID AX210NGW MilDef Crete Cover Letter(s) pdf 88.99 KiB May 25 2022 / May 27 2022

frequency equipment class purpose
1 2022-09-12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 5210 ~ 5210 NII - Unlicensed National Information Infrastructure TX
3 JBP - Part 15 Class B Computing Device Peripheral
4 2422 ~ 2462 DTS - Digital Transmission System
5 2022-05-27 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Change in Identification
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2422 ~ 2462 DTS - Digital Transmission System
8 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
9 JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 8 9 Effective 2022-09-12
1 2 3 4 5 6 7 8 9 2022-05-27
1 2 3 4 5 6 7 8 9 Applicant's complete, legal business name MilDef Crete Inc.
1 2 3 4 5 6 7 8 9 FCC Registration Number (FRN) 0011213410
1 2 3 4 5 6 7 8 9 Physical Address 7F, No. 250, Sec 3, Pei Shen Rd
1 2 3 4 5 6 7 8 9 Shen Keng District,New Taipei City, N/A
1 2 3 4 5 6 7 8 9 Taiwan
app s TCB Information
1 2 3 4 5 6 7 8 9 TCB Application Email Address c******@telefication.com
1 2 3 4 5 6 7 8 9 h******@acbcert.com
1 2 3 4 5 6 7 8 9 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5 6 7 8 9 A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
1 2 3 4 5 6 7 8 9 Grantee Code IR5
1 2 3 4 5 6 7 8 9 Equipment Product Code DH8
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 8 9 Name W******** L******
1 2 3 4 5 6 7 8 9 Title Manager
1 2 3 4 5 6 7 8 9 Telephone Number 886-2******** Extension:
1 2 3 4 5 6 7 8 9 Fax Number 886-2********
1 2 3 4 5 6 7 8 9 E-mail w******@mail.crete.com.tw
app s Technical Contact
1 2 3 4 5 6 7 8 9 Firm Name BTL Inc.
1 2 3 4 5 6 7 8 9 DEKRA Testing and Certification Co., Ltd
1 2 3 4 5 6 7 8 9 DEKRA
1 2 3 4 5 6 7 8 9 Name S****** H****
1 2 3 4 5 6 7 8 9 F******** Y********
1 2 3 4 5 6 7 8 9 Physical Address No.18, Ln. 171, Sec. 2, Jiuzong Rd.
1 2 3 4 5 6 7 8 9 Taiwan
1 2 3 4 5 6 7 8 9 Telephone Number +8862********
1 2 3 4 5 6 7 8 9 Fax Number 88622********
1 2 3 4 5 6 7 8 9 E-mail S******@newbtl.com
1 2 3 4 5 6 7 8 9 f******@dekra.com
app s Non Technical Contact
1 2 3 4 5 6 7 8 9 Firm Name BTL Inc.
1 2 3 4 5 6 7 8 9 Name M**** W********
1 2 3 4 5 6 7 8 9 Physical Address No.18, Ln. 171, Sec. 2, Jiuzong Rd.
1 2 3 4 5 6 7 8 9 Taiwan
1 2 3 4 5 6 7 8 9 Telephone Number +8862********
1 2 3 4 5 6 7 8 9 Fax Number 88622********
1 2 3 4 5 6 7 8 9 E-mail M******@newbtl.com
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 8 9 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 8 9 No
1 2 3 4 5 6 7 8 9 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 8 9 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 8 9 Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 8 9 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 8 9 JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4 5 6 7 8 9 DTS - Digital Transmission System
1 2 3 4 5 6 7 8 9 6XD - 15E 6 GHz Low Power Indoor Client
1 2 3 4 5 6 7 8 9 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)HANDHELD COMPUTER
1 2 3 4 5 6 7 8 9 IntelR Wi-Fi 6E AX210
1 2 3 4 5 6 7 8 9 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 7 8 9 Yes
1 2 3 4 5 6 7 8 9 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 7 8 9 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 7 8 9 Change in Identification
1 2 3 4 5 6 7 8 9 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 8 9 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 8 9 Grant CommentsClass II permissive change: This change is to a) established the portable configuration in the specific host(s), MilDef Crete Inc, DH8, with the antenna change of the same type with lesser gain, as described in the filing. The highest reported SAR values for product specific (body), and simultaneous transmission use conditions are 0.33 W/kg, and 1.43 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 8 9 Class II permissive change: This change is to a) established the portable configuration in the specific host(s), MilDef Crete Inc, DH8, with the antenna change of the same type with lesser gain, as described in the filing. b) The frequency band of UNII-2A/-2C/3 are disabled via the software as described in this filing. The highest reported SAR values for product specific (body), and simultaneous transmission use conditions are 0.73 W/kg, and 1.24 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 8 9 Class II permissive change: This change is to install the certified into the specific host(s), MilDef Crete Inc, DH8.
1 2 3 4 5 6 7 8 9 Class II permissive change: This change is to a) established the portable configuration in the specific host(s), MilDef Crete Inc, DH8, with the antenna change of the same type with lesser gain, as described in the filing. The highest reported SAR values for product specific (body), and simultaneous transmission use conditions are 1.10 W/kg, and 1.10 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 8 9 Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
1 2 3 4 5 6 7 8 9 Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 8 9 Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 8 9 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 8 9 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 8 9 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 8 9 Firm Name BTL Inc.
1 2 3 4 5 6 7 8 9 Intel Corporation S.A.S.
1 2 3 4 5 6 7 8 9 Name A****** Y********
1 2 3 4 5 6 7 8 9 N****** A********
1 2 3 4 5 6 7 8 9 Telephone Number +886-******** Extension:
1 2 3 4 5 6 7 8 9 00334********
1 2 3 4 5 6 7 8 9 Fax Number +886-********
1 2 3 4 5 6 7 8 9 E-mail a******@btl.com.tw
1 2 3 4 5 6 7 8 9 n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5180 5240 0.166
2 2 15E CC MO 5190 5230 0.199
2 3 15E CC MO 5210 5210 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.01
4 2 15C CC MO 2412 2472 0.792
4 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5955 7115 0.003
5 2 15E CC MO 5965 7085 0.007
5 3 15E CC MO 5985 7025 0.013
5 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.01
7 2 15C CC MO 2412 2472 0.792
7 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.166
8 2 15E CC MO 5190 5230 0.199
8 3 15E CC MO 5210 5210 0.089
8 4 15E CC MO 5250 5250 0.061
8 5 15E CC MO ND 5260 5320 0.165
8 6 15E CC MO ND 5270 5310 0.153
8 7 15E CC MO ND 5290 5290 0.084
8 8 15E CC MO ND 5500 5700 0.245
8 9 15E CC MO ND 5710 5710 0.249
8 1 15E CC MO ND 5720 5720 0.134
8 11 15E CC MO ND 5530 5690 0.228
8 12 15E CC MO 5745 5825 0.262
8 13 15E CC MO 5755 5795 0.27
8 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15B CC

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC